Det Tronics - X5200 UV IR HC

SPECIFICATION DATA
UVIR Flame Detector

X5200
DESCRIPTION HIGHLIGHTS
The X5200 UVIR Flame Detector meets the ▲▲ Complies with FM 3260
Y E A R
3
most stringent requirements worldwide with ▲▲ EN54 certified
advanced detection capabilities and immunity to ▲▲ Certified SIL 2 capable

extraneous sources, combined with a superior
▲▲ ATEX Directive compliant
mechanical design. The mounting arrangement
▲▲ EQP models available
WARRANTY allows the UV and IR sensors to monitor the
same hazardous location with a 90 degree cone ▲▲ A new level of false alarm rejection
of vision. When both sensors simultaneously ▲▲ Responds to a fire in the presence of modulated blackbody
detect the presence of a flame, an alarm signal is generated. The radiation (i.e. heaters, ovens, turbines) without false alarm
detector has Division and Zone explosion-proof ratings and is ▲▲ HART models available
suitable for use in indoor and outdoor applications. ▲▲ FDT/DTM capable
▲▲ High speed capability

The standard output configuration includes fire, fault and auxiliary
relays. An optional 0 to 20 mA output with HART can be provided ▲▲ Microprocessor controlled heated optics for increased
in addition to the three relays. A model with pulse output is resistance to moisture and ice
available for easy retrofitting into existing Det-Tronics controller ▲▲ Automatic, manual or magnetic o ® (optical integrity) testing —
i
based systems. Auxiliary relay and 0 to 20 mA output are not no external test lamp required
available with the pulse model. A tri-color LED on the detector ▲▲ Easily replaceable o plate
i
faceplate indicates normal condition and notifies personnel of fire ▲▲ Fire, fault and auxiliary relays standard
alarm or fault conditions.
▲▲ MODBUS RS-485 communication
The X5200 housing is available in aluminum or stainless steel, ▲▲ 0 to 20 mA isolated output (optional)
with NEMA 4X and IP66/IP67 rating. ▲▲ Pulse output for compatibility with controller based systems
(optional)
Typical applications include:
▲▲ A tri-color LED on the detector faceplate indicates normal
— Munitions
condition and notifies personnel of fire alarm or fault conditions
— Petrochemical applications
▲▲ Mounting arm allows easy sighting
— Turbines
▲▲ Integral wiring compartment for ease of installation
— Hangars
▲▲ Class A wiring per NFPA-72
▲▲ Meets NFPA-33 response requirement for under 0.5 second
(available when model selected)

▲▲ RFI and EMC Directive compliant
▲▲ Built-in data logging / event monitoring
4.1 © Detector Electronics Corporation 2014 9/14 90-1156

SPECIFICATIONS
Operating Voltage 24 Vdc. Operating range is 18 to 30 Vdc. Certification

Maximum ripple is 2 volts peak-to-peak.
FM FM
Power Consumption 2.8 watts @ 24 Vdc minimum. APPROVED APPROVED
17.5 watts @ 30 Vdc with EOL resistor installed and DEMKO 01 ATEX 132195X
Class I, Div. 1, Groups B, C & D (T5);
heater on maximum. Increased Safety Model
Class II, Div 1, Groups E, F & G (T5);
Relays Contacts rated 5 amperes at 30 Vdc. Class I, Div. 2 , Groups A, B, C & D (T3); II 2 G
Class II, Div 2. Groups F & G (T3); 0539 II 2 D
Fire Alarm: — Form C (NO and NC contacts) Class III. Ex d e IIC T6–T5 Gb
— normally de-energized Enclosure NEMA/Type 4X. Ex tb IIIC T80°C
— latching/non-latching. For FM Zone approval information, refer T6 (Tamb –50°C to +60°C)
Fault: — Form A (NO contacts) to the X5200 instruction manual (95-8546). T5 (Tamb –50°C to +75°C)
— normally energized IP66/IP67.
— latching/non-latching. Flameproof Model
Auxiliary*: — Form C (NO and NC contacts) II 2 G
0539 II 2 D
— normally energized
— latching/non-latching. IEC 61508 Ex d IIC T6–T5 Gb
Certified SIL 2 Capable Ex tb IIIC T80°C
Current Output* 0–20 mA (± 0.3 mA), with a maximum loop Applies to specific models – T6 (Tamb –55°C to +60°C)
(Optional) resistance of 500 ohms from 18–19.9 Vdc, Refer to the SIL 2 Certified T5 (Tamb –55°C to +75°C)
600 ohms from 20–30 Vdc. X5200 Safety Manual (95-8672). IP66/IP67.
Temperature Range Operating: –40°F to +167°F (–40°C to +75°C)

Storage: –67°F to +185°F (–55°C to +85°C)
Hazardous location ratings from –55°C to +75°C
available on flameproof model.
VNIIFTRI IECEx Certificate of Conformity
Humidity Range 0 to 95% relative humidity, can withstand 100% Certificate of Conformity IECEx ULD 06.0018X
condensing humidity for short periods of time. to CUTR 012/2011 Ex d e IIC T6-T5 Gb
2ExdeIICT6/T5 IP66 Ex tb IIIC T80°C
Field of View The detector has a 90 degree cone of vision T6 (Tamb = –55°C to +60°C) T6 (Tamb = –50°C to +60°C)
(horizontal) with the highest sensitivity lying along T5 (Tamb = –55°C to +75°C) T5 (Tamb = –50°C to +75°C)
its central axis.
– OR – IP66/IP67.
Source Tube Contains radioactive isotope Krypton 85 (Kr85) 1ExdIICT6/T5 IP66 – OR –
Calculated Activity: 14,800 Becquerels (0.4μCi). T6 (Tamb = –55°C to +60°C) Ex d IIC T6-T5 Gb
T5 (Tamb = –55°C to +75°C). Ex tb IIIC T80°C
Warranty 3 years. T6 (Tamb = –55°C to +60°C)
T5 (Tamb = –55°C to +75°C)
Enclosure Material Copper-free aluminum (painted) or stainless steel IP66/IP67.
(316/CF8M Cast).
Conduit Entry Size 3/4 inch NPT or M25. VNIIPO

Certificate of Conformity to technical
Shipping Weight Aluminum: 7 lbs. (3.2 kg) regulations, GOST R 53325-2009.
(Approximate) Stainless Steel: 14.6 lbs. (6.7 kg).
UL-BRHZ-0061X
Wiring 16 AWG or 2.5 mm2 shielded cable is recommended. Ex d e IIC T6-T5 Gb IP66/IP67
VdS T6 (Tamb = –50°C to +60°C)
Response Characteristics T5 (Tamb = –50°C to +75°C)
Very High Sensitivity UV & IR, Low Arc, TDSA On, Quick Fire On Approvals to EN54-10 – OR –
Distance Typical Response See instruction manual for details. Ex d IIC T6-T5 Gb IP66/IP67
Fuel Size
Feet (m) Time (seconds) T6 (Tamb = –55°C to +60°C)
n-Heptane 1 x 1 foot 85 (25.9) 14
T5 (Tamb = –55°C to +75°C).
Methane 32 inch plume 65 (19.8) 5
NOTE: Refer to the X5200 instruction manual 95-8546 for details regarding
detector response.
*Auxiliary relay and 0 to 20 mA output are not available on pulse output model.
Corporate Office
Specifications subject to change without notice. 6901 West 110th Street | Minneapolis, MN 55438 USA
Operator: 952.941.5665 or 800.468.3244
All trademarks are the property of their respective owners. Customer Service: 952.946.6491 or 800.765.3473
© 2014 Detector Electronics Corporation. All rights reserved. www.det-tronics.com | Email: [email protected]

Det Tronics - X5200 UV IR HC

Uploaded by

Copyright:

Available Formats

Det Tronics - X5200 UV IR HC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Det Tronics - X5200 UV IR HC

Uploaded by

Copyright:

Available Formats

SPECIFICATION DATA

UVIR Flame Detector

advanced detection capabilities and immunity to ▲▲ Certified SIL 2 capable

suitable for use in indoor and outdoor applications. ▲▲ FDT/DTM capable

▲▲ High speed capability

▲▲ Meets NFPA-33 response requirement for under 0.5 second

(available when model selected)

▲▲ Built-in data logging / event monitoring

4.1 © Detector Electronics Corporation 2014 9/14 90-1156

Operating Voltage 24 Vdc. Operating range is 18 to 30 Vdc. Certification

Temperature Range Operating: –40°F to +167°F (–40°C to +75°C)

Conduit Entry Size 3/4 inch NPT or M25. VNIIPO

You might also like