Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Proposal For Facade Repair Work, Mill Building Phase.1

    Uploaded by

    fernando gultom
    This document is a proposal for facade repair work at the Phase 1 Mill Building of PT Bungasari Flour Mills Indonesia. It provides background on the company's manufacturing processes and existing compressor issues due to overheating. The proposal then outlines the problem of water seeping into the building during rains. The corrective action planned is to repair the facade cracks. A schedule and cost summary are included, with a grand total of Rp60,000,000 proposed for the facade repair work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Proposal For Facade Repair Work, Mill Building Phase.1

    Uploaded by

    fernando gultom
    20 views1 page
    This document is a proposal for facade repair work at the Phase 1 Mill Building of PT Bungasari Flour Mills Indonesia. It provides background on the company's manufacturing processes and existing compressor issues due to overheating. The proposal then outlines the problem of water seeping into the building during rains. The corrective action planned is to repair the facade cracks. A schedule and cost summary are included, with a grand total of Rp60,000,000 proposed for the facade repair work.

    Original Title

    Repair Facade Mill Building

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a proposal for facade repair work at the Phase 1 Mill Building of PT Bungasari Flour Mills Indonesia. It provides background on the company's manufacturing processes and existing compressor issues due to overheating. The proposal then outlines the problem of water seeping into the building during rains. The corrective action planned is to repair the facade cracks. A schedule and cost summary are included, with a grand total of Rp60,000,000 proposed for the facade repair work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    20 views1 page

    Proposal For Facade Repair Work, Mill Building Phase.1

    Uploaded by

    fernando gultom
    This document is a proposal for facade repair work at the Phase 1 Mill Building of PT Bungasari Flour Mills Indonesia. It provides background on the company's manufacturing processes and existing compressor issues due to overheating. The proposal then outlines the problem of water seeping into the building during rains. The corrective action planned is to repair the facade cracks. A schedule and cost summary are included, with a grand total of Rp60,000,000 proposed for the facade repair work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    P.T.

    BUNGASARI FLOUR MILLS INDONESIA


    Project and Engineering Department Revise 0 Approved by Checked by Checked by Prepared by

    Proposal for Facade repair work, Mill Building Phase.1


    Date:17-JULI-2022

    I. Background Yannes Piung Eko Saryanto Fernando Gultom Fernando Gultom


    III. Problems
    1.1 All manufacturing process in Bungasari Flour Mills Indonesia must meet all vendor standart.

    1.2 Our company use kaeser screw compressor type BSD 75 and ASD 37 to supplies all pressure utility needed in mill and mixing area, and intensive care is absolutely needed 3.1 If it rains, water seeps into the factory building, this is a problem that interferes with the plant's operations, so it needs to be fixed, in the manner described below.
    to keep it work properly. So the case of compressor shut-off because Over-heating is should not happen.

    1.3 One of the causes of over-heating is : Heat dissipation on the cooler unit is not working properly, and Air circulation in the compressor room is not good (too hot).

    II. Existing Condition


    IV. Corrective Action

    Existing condition, all surface of the gab wall with column and beam structure,
    there are cracks that are large enough. 4.1

    FRONT FIEW 1 FRONT FIEW 2 FRONT FIEW 3

    V. Action Plan Schedule

    No Description PIC JULI AGUST SEPT Remark


    FRONT FIEW 4 FRONT FIEW 5 FRONT FIEW 6 III IV I II III IV I II III IV
    1 Plan and budget approval Project
    2 Bidding process, comparison and vendor appointment Project
    3 Construction Vendor
    4 Finishing Vendor

    VI . Cost Summary

    No Description Quantity Unit price Sub Total


    Hood compressor upgrading jobs
    1 Part and Accessories : 5 Ls Rp 9,000,000 Rp 45,000,000
    - Exhaust ducting 800 x 600 mm Rp -
    - Installation based on Kaeser standard drawing. Rp -
    2 Services: 5 Ls Rp 3,000,000 Rp 15,000,000
    - exhaust ducting installation. Rp -
    - 4 walls coring jobs Rp -
    - Support material Rp -
    Rp -
    Rp -
    GRAND TOTAL Rp 60,000,000
    FRONT FIEW 7 FRONT FIEW 8 FRONT FIEW 9

    You might also like