M 001 22

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

P.

O No : 12666/12131 Certificate Date : 25/09/2021


P.O Date : 02/07/2021 Inspection By : AFL
Material Spec. : ASTM A234Gr.WPB ED.2018 Dimenstional Standard : ASME B16.9 ED.2018
ASME SA234Gr.WPB ED.2017
Sr. Size Item Sch. Qty. ID No. Heat No. HT Hardness Welght (KG)
No (inch) (BHN)
1 3" 45 Deg. LR ELBOW XH 112 R199 19E01071 HF 140-148 178.00
2 3" 90 Deg. LR ELBOW XH 313 R199 19E01071 HF 142-150 942.13
3 3" 90 Deg. LR ELBOW XH 296 R122 4a5161 HF 142-150 892.87
4 1-1/4" 90 Deg. LR ELBOW STD 3836 R203 A11091 HF 158-162 1031.00
5 12" X 8" ECCENTRIC REDUCER STD 6 R224 19A01023 CF 140-148 95.00
6 3" X 2" CONCENTRIC REDUCE XH 50 R288 LZ200202529 CF 144-150 70.00
7 3" TEE XH 100 R288 LZ200202529 CF 144-150 541.00
8 4" TEE XH 100 R292 UA10 CF 152-156 806.00
ID Chemical Composition (%) Physical Properties
NO. UTS 0.2% EL RA
C Mn P S SI Cu NI Cr Mo TI Ai Nb V C.E Mpa Proof % %
Stress
Mpa
R199 0.1800 0.7900 0.0210 0.0130 0.2400 0.0180 0.0990 0.0190 0.0090 -- -- -- 0.0050 0.3260 452.10 315.30 36.80 --
R122 0.1480 0.7070 0.0190 0.0110 0.2320 0.0040 0.0080 0.0300 NIL -- -- -- 0.0020 0.2730 453.00 309.40 31.00 --
R203 0.1320 0.6920 0.0130 0.0030 0.2160 0.0030 0.0030 0.0150 0.0030 -- -- -- 0.0030 0.2520 541.61 443.11 35.20 --
R224 0.1800 0.5740 0.0110 0.0050 0.2340 0.0100 0.0120 0.0390 0.0100 -- -- -- 0.0020 0.2870 464.80 283.00 29.40 --
R285 0.2100 0.3690 0.0110 0.0060 0.1830 0.0090 0.0080 0.0110 0.0030 -- -- -- 0.0010 0.2760 460.00 300.00 43.44 --
R292 0.1550 1.0150 0.0170 0.0061 0.1610 0.0044 0.0070 0.0150 0.0005 -- -- -- 0.0020 -- 514.20 369.90 27.40 --
Heat Treatment
Heat Treatment Code Heat Treatment Particulars
HF Hot formed at 620°C to 980°C and subsequently cooled in still on.
CF Cold Formed Fittings Stress Relieved at 675°C & subsequently in still air.
MARKS:
(1) Material was manufactured, sample tested and inspected in accordance with indicate specifications and was found to meet the requirements.
(2) Test Specimens : - Transverse.
(3) Starting Material: -Carbon Steel plate.
(4) No weld repair was performed.
(5) Material Conforms to NACE MR0175- ED-2015 ADD. 2017 / NACE MR103- ED-2015 ADD.2017 Only For Hardness.
(6) Complies PED 2014/68/EU Annex 1 para 4.3.
(7) Tested in accordance with EN 10204 Type 3.1.
MARKING DETAILS: COMPANY LOGO, SIZE, SCH., MATERIAL SPECIFICATION, ID.NO., COUNTRY OF ORIGIN, MT (Only for Tee)
We here by certify that the products enlisted above have been supplied in accordance with the purchaser´s requirement and the test results mentioned
above are Correct.

(VICE PRESIDENT MECHANICAL)

QCI/P02/F05, REV.00

You might also like