BRITISH STANDARD BS 5228-4:

1992
Incorporating
Amendment No.1
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

Noise control on
construction and open
sites —
Part 4: Code of practice for noise and
vibration control applicable to piling
operations
 BS 5228-4:1992

Committees responsible for this

British Standard
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

The preparation of this British Standard was entrusted by the Basic Data and
Performance Criteria for Civil Engineering and Building Structures Standards
Policy Committee (BDB/-) to Technical Committee BDB/5, upon which the
following bodies were represented:

Arboricultural Association Association of County Councils

Association of District Councils Association of Metropolitan Authorities
Building Employers Confederation Construction Health and Safety Group
Department of the Environment (Property Federation of Civil Engineering
Services Agency) Contractors
Federation of Piling Specialists Health and Safety Executive
Incorporated Association of Architects and Institute of Building Control
Surveyors
Institute of Clerks of Works of Great Britain Institution of Civil Engineers
Incorporated
Institution of Environmental Health Officers Institution of Structural Engineers
Landscape Institute National Council of Building Material
Producers
Royal Institute of British Architects Royal Institution of Chartered Surveyors
Scottish Office (Building Directorate) Society of Chief Architects of Local
Authorities
Trades Union Congress

The following bodies were also represented in the drafting of the standard,
through subcommittees and panels:

Association of Consulting Engineers British Aggregate Construction Materials

Industries
British Coal Corporation British Compressed Air Society
Concrete Society
Construction Plant (Hire Association) Department of the Environment (Building
Research Establishment)
Federation of Dredging Contractors Institution of Highways and
Transportation
Sand and Gravel Association Limited Society of Motor Manufacturers and
Traders Limited
This British Standard, having
been prepared under the
direction of the Basic Data
and performance Criteria for
Civil Engineering and
Building Structures Standards
Policy Committee, was
published under the authority
of the Standards Board and
comes into effect on
1 May 1992

© BSI 02-1999
Amendments issued since publication
First published January 1986
Second edition May 1992 Amd. No. Date Comments

The following BSI references

7787 July 1993 Indicated by a sideline in the margin
relate to the work on this
standard:
Committee reference BDB/5
Draft for comment 90/14249 DC

ISBN 0 580 20381 6

 BS 5228-4:1992

Contents
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

Page
Committees responsible Inside front cover
Foreword iii
Section 1. General
0 Introduction 1
1 Scope 1
2 Definitions 1
3 Legislative background 1
4 Guidance notes on legislation 2
5 Project supervision 4
Section 2. Noise
6 Factors to be considered when setting noise control targets 7
7 Practical measures to reduce site noise 18
Section 3. Vibration
8 Factors to be considered when setting vibration control targets 22
9 Practical measures to reduce vibration 26
10 Measurement 28
Appendix A Description of vibration 31
Appendix B Prediction of vibration levels 33
Appendix C Measured vibration levels 34
Appendix D Examples of record sheets 60
Appendix E Bibliography 62
Figure 1 — Procedures to control construction noise and/or
vibration under the Control of Pollution Act 1974 6
Figure 2 — Piling and kindred ground treatment systems 21
Figure 3 — Orientation of vibration transducers 24
Figure 4 — Site measurements sheet 60
Figure 5 — Vibration data summary sheet 61
Table 1 — Sound level data on piling 8
Table 2 — Vibration effects on different subjects: the parameters
to measure and the ranges of sensitivity of apparatus to use 30
Table 3 — Summary of case history data on vibration levels measured
during impact bored piling (tripod) 36
Table 4 — Summary of case history data on vibration levels measured
during driven cast-in-place piling (drop hammer) 39
Table 5 — Summary of case history data on vibration levels measured
during dynamic consolidation 41
Table 6 — Summary of case history data on vibration levels measured
during vibroflotation/vibroreplacement 44
Table 7 — Summary of case history data on vibration levels measured
during the use of casing vibrators 48
Table 8 — Summary of case history data on vibration levels measured
during rotary bored piling (including casing dollies) 50
Table 9 — Summary of case history data on vibration levels measured
during tripod bored piling 51
Table 10 — Summary of case history data on vibration levels measured
during driven sheet steel piling 52
Table 11 — Summary of case history data on vibration levels measured
during driving of bearing piles 54

© BSI 02-1999 i
 BS 5228-4:1992
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

Page
Table 12 — Summary of case history data on vibration levels measured
during use of vibratory pile drivers 57
Table 13 — Summary of miscellaneous case history data on vibration
levels measured during piling and kindred operations 59
Publication(s) referred to Inside back cover

ii © BSI 02-1999
 BS 5228-4:1992

Foreword
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

This part of BS 5228, Which has been prepared under the direction of the Basic
Data and Performance Criteria for Civil Engineering and Building Structures
Standards Policy Committee, covers the control of noise and vibration from piling
sites, and is a revision of BS 5228-4:1986, which is withdrawn.
The standard refers to the need for the protection of persons living and working
in the vicinity of such sites and those working on the sites from noise and
vibration. It recommends procedures for noise and vibration control in respect of
piling operations and aims to assist architects, contractors and site operatives,
designers, developers, engineers, local authority environmental health officers
and planners, regarding the control of noise and vibration.
Vibration can cause disturbance to processes and activities in neighbouring
buildings, and in certain circumstances can cause or contribute to building
damage.
Vibration can be the cause of serious disturbance and inconvenience to anyone
exposed to it. The Control of Pollution Act 1974, the Environmental Protection
Act 1990 and, in Northern Ireland, the Pollution Control and Local Government
(Northern Ireland) Order 1978, which define “noise” as including “vibration”
(Section 73(1) of the 1974 Act, Section 79(7) of the 1990 Act and Article 53(1) of
the 1978 Order), contain provisions for the abatement of nuisances caused by
noise and vibration.
It should be noted that BS 6472 covers the human response to vibration in
structures and BS 7385-1 covers the measurement and evaluation of structural
vibration. An item dealing with the vibratory loading of structures is being
processed within ISO/TC 98/SC 2 “Safety of Structures”. This is being monitored
by BSI.
BS 5228 consists of the following Parts:
— Part 1: Code of practice for basic information and procedures for noise
control;
— Part 2: Guide to noise control legislation for construction and demolition,
including road construction and maintenance;
— Part 3: Code of practice for noise control applicable to surface coal extraction
by opencast methods;
— Part 4: Code of practice for noise and vibration control applicable to piling
operations.
BS 5228-1 is common to all the types of work covered by the other Parts of
BS 5228, which should be read in conjunction with Part 1.
Other Parts will be published in due course as and when required by industry.
Attention is drawn to the Control of Pollution Act 1974 (Part III) (Noise), the
Environmental Protection Act 1990 (Part III) (Statutory Nuisances and Clean
Air), the Health and Safety at Work etc. Act 1974 (in Northern Ireland, the
Pollution Control and Local Government (Northern Ireland) Order 1978 and the
Health and Safety at Work (Northern Ireland) Order 1978), and to the Noise at
Work Regulations 1989, Statutory Instrument 1989 No. 1790.
A British Standard does not purport to include all the necessary provisions of a
contract. Users of British Standards are responsible for their correct application.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i to iv,
pages 1 to 62, an inside back cover and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on
the inside front cover.

© BSI 02-1999 iii

 Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

iv
blank
 BS 5228-4:1992

Section 1. General
Licensed Copy: University of Glasgow, The University of Glasgow, 12/08/2013 10:05, Uncontrolled Copy, (c) The British Standards Institution 2013

0 Introduction 1 Scope
This Part of BS 5228 is concerned with all works This part of BS 5228 supplements the information
associated with piling operations on sites where given in BS 5228-1, with information especially
temporary or permanent foundation or ground relevant to piling works. It sets out
stability requirements are to be met by the recommendations for noise and vibration control
installation of piles by any of the recognized measures which can be adopted to ensure good
techniques (see 7.2). In common with other practice and enable piling to be carried out
mechanized construction activities, piling works economically with as little disturbance to the
pose different problems of noise and vibration community as is practicable.
control from those associated with most types of Section 2 contains recommendations relating to
factory-based industry for the following reasons: noise control. Section 3 contains recommendations
a) they are mainly carried out in the open; for the mitigating of the effects of ground-borne
b) they are of temporary duration, although they vibration.
may cause great disturbance while they last; NOTE 1 This Part of BS 5228 should be read in conjunction
with BS 5228-1.
c) the noise and vibration they cause arise from NOTE 2 The titles of the publications referred to in this
many different activities and kinds of plant, and standard are listed on the inside back cover.
their intensity and character may vary greatly at
different phases of the work; 2 Definitions
d) the sites cannot be excluded by planning For the purposes of this Part of BS 5228, the
control, as factories can, from areas that are definitions given in BS 5228-1 apply together with
sensitive to noise. the following.
Increased mechanization has meant the use of more 2.1
powerful and potentially noisier machines. It is now amplification factor
widely recognized that noise levels that can be
generated are unacceptable in many instances and the motion measured at a given point (usually on
that reductions are desirable for the benefit of both the structure) divided, by the motion measured at a
reference point (usually at the base of the structure
the industry and the public. Piling works frequently
or on the foundation)
form one of the noisier aspects of construction. The
trend towards medium and high rise structures, 2.2
particularly in urban areas, coupled with the peak particle velocity (p.p.v.)
necessity to develop land which was hitherto the maximum value of particle velocity obtained
regarded as unfit to support structures, has led to during a given interval
increasing use of piled foundations. Piling is usually
one of the first activities to be carried out on site, 2.3
and special precautions should be taken to mitigate piling
the disturbance created, particularly in sensitive the installation of bored and driven piles and the
areas. effecting of ground treatments by vibratory,
If a site upon which construction or demolition work dynamic and other methods of ground stabilization
will be carried out involves an existing operational
railway, special features that are significant in 3 Legislative background
relation to noise and vibration control have to be Attention is drawn to the following legislation,
taken into account. Advice should be sought in such current at the date of publication of this Part of
cases from the appropriate railway authorities. BS 5228.
Because of the variable nature of vibration a) Control of Noise (Appeals) (Scotland)
transmission characteristic of soils, rocks and Regulations 1983.
structure, the prediction of vibration levels is a less b) Control of Noise (Appeals) Regulations 1975.
precise science than the corresponding prediction of
air-borne noise levels. Whilst data obtained from c) Statutory Nuisance (Appeals) Regulations
various sources are included for illustrative (as amended) 1990.
purposes, any predictions based thereon for specific d) Control of Noise (Appeals) Regulations
circumstances should ideally be verified by (Northern Ireland) 1978.
appropriate field measurements. e) Control of Pollution Act 1974.
f) Environmental Protection Act 1990.
g) Health and Safety at Work etc. Act 1974.

© BSI 02-1999 1