80MM Thermal Receipt Printer

User Manual

Please read this manual carefully before using it, and keep
it for future reference

1
 80MM Thermal Receipt Printer User Manual
About this manual
Thanks for your purchase of our company's 80MM thermal printer.
This manual can help you to use this product. Please read this manual
before use, and safekeeping, so that all the user of this product can
read it.

Note
Due to our constant efforts to improve and upgrade the product's
function and performance, our company reserves the right to change
the hardware and software specifications in the manual without prior
notice.

If you find any errors or missions in the contents of this manual, please
tell us or our agent,thank you very much.

Without the prior written permission of our company, the contents of the
relevant manual attached to the product shall not be reproduced,
transmitted, transcribed, stored, etc..

Statement
This product is type A product, may cause the wireless radio
interference in the living environment , in this case,the user need to
protect the interference with effective protection measures.

Safety tips
●Do not disassemble the printer personally, pls read this manual before
use.
●The printer should be installed in a stable place to avoid damage to
the printer due to vibration or shock.

2
 80MM Thermal Receipt Printer User Manual
●Do not store and use the printer in the environment of high
temperature, high humidity, and heavy pollution.
●The power adapter of the printer should be connected to the
grounding socket. Avoid to use the same socket with other large motor
or other equipment can lead to voltage fluctuation. Otherwise, it may
lead abnormal to printer and even damage to the printer.
●Pls use the standard power adapter to the printer.
●When connect to printer, please make sure the printer is in power off
status.
●When the printer is printing, please do not open the paper cover,
otherwise it may cause unexpected situation, and even damage the
printer.
●After printing, print head is still in high temperature, pls do not touch, to
avoid burn.
●Pls do not use dissolved substances, such as: benzene, thinner or
alcohol wipe to clean the printer casing. At the same time, please do not
use corrosive chemicals and detergent to contact printer. To avoid
damage to the printer.
●Pls use our company approved or regular factory produced printing
paper, otherwise it may lead to poor print quality, and even damage the
printer core.
●How long the letters can stay on the receipt is related to thermal paper
quality, if you want to print the long-term preservation bills, please
choose a high quality thermal paper.
●The printer is only suitable for using in the altitude below 2000M.
●The printer is only suitable for use in non tropical climates.

3
 80MM Thermal Receipt Printer User Manual
Application Area:
●Electronic cash register POS system printing
●Electronic transfer POS system printing
●Sports, postal, civil aviation bill printing
●Query, service system bill printing
●Catering industry bill printing
●Tax bill printing

Package:
●Printer 1PC
●Standard power adapter (including power line) 1SET
●Paper roll 1ROLL
●Data line 1PC
●User manual 1PC
●Driver CD 1PC

Printer Features：
●High-speed printing, improve the printing efficiency
●Excellent waterproof, anti - oil, anti-dust structure design
●Support wall hanging function, meet the special environment printing
●Support 80MM large diameter paper roll
●Support kitchen printing and Internet printing
●Support printer monitoring function,to avoid losing bills
●Using 100M Ethernet card, connect printer faster, to avoid losing bills
●Recover printing after netwok disconnection,to avoid losing bills
●Support LOGO Graphical download and print
●Support 1D,2D bar code printing
●Support order come remind and error alarm
●Support Muti-language printing
●Standard GB18030 large character library;
4
 80MM Thermal Receipt Printer User Manual
● Support muti-language printing;
● Rich interface optional;
● Compatible with ESC/POS print command mode;
● Support Windows, Linux, Android and IOS system printing;

Printer Parameters:
Item Parameters
Printing Thermal Line
Printing 72mm
Resolution 576 Dots/Line or 512 Dots/Line
Print 160-220mm/S,300mm/S(Max)
Line 3.75mm（Can adjust line spacing by
Line No. FontA-48Lines/FontB-64Lines
Character Standard GB18030 simplified / traditional
Print
Character ANK character
parameters
Extended PC437/Katakana/PC850/PC860/PC863/
character PC865/WestEurope/Greek/Hebrew/East
set Europe/Iran/WPC1252/PC866/PC852/
PC858/IranII/Latvian/Arabic/PT151,1251/
PC737/WPC/1257/ThaiVietnam/PC864/
PC1001/(Latvian)/(PC1001)/(PT151,125
1)/(WPC1257)/(PC864)/(Vietnam)/(Thai)
Bar code UPC-A/UPC-E/JAN13(EAN13)/JAN8(EA
N8)CODE39/ITF/CODABAR/CODE93/C
ODE128
Graphics Supports bitmap download and print
Cutter Cutter Full cut/Half cut

5
 80MM Thermal Receipt Printer User Manual
Type Thermal Paper
Paper Width 79.5±0.5mm
Diameter ≤82mm
Feed Easy feed(Clameshell feed)
Print commands ESC/POS
Power Power
Input：AC 110V-240V,50～60Hz
Adaptor
Cash DC 24V/1A
Drawer
Buffer Input 2048K bytes
NV Flash 256K bytes
physical Weight 1.2KG
characteristic Dimension 186*145*133(MM)
Environment Working Temp：5 ~ 45 ℃
， Humidity：10 ~ 80%
Storage Temp：-10 ~ 50 ，Humidity：10 ~ 90%
℃
Reliability Cutter Life 1000,000times
parameter Print Head 100KM（print density≤12.5）
Software Driver Android,IOS,Linux,Windows

6
 80MM Thermal Receipt Printer User Manual

Printer connection
1. Connect the power adapter cable with printer.
2. Connect the data cable(eg: USB line) with printer also.
3. Connect Cash drawer line with printer as well.

Install thermal paper

80MM series thermal printer using 80MM thermal paper, using easy
paper structure, convenient to install paper.
1 Pressing down the opening button, open the printer cover
2 Put thermal print paper in the paper holder according to the pic below
3 Pull a little paper out of the warehouse
4 tear excess printing paper

7
 80MM Thermal Receipt Printer User Manual

Note: take care of the roll direction, if reverse direction, the content
won’t be print out.

Power switch, press bottom, indicators and their functions

1 Power switch button

The switch can turn on and off the printer power supply.
2 Feed button
Press this button can feed the paper out, if keep pressing, will continue
to feed.
3 Paper light indicator

8
 80MM Thermal Receipt Printer User Manual
When this paper light and the Error light flashing at the same time, it
indicates printer is lack of paper; When this paper light and the Error
light are off, means the printer has paper.
4 Power light indicator
This light on indicates that the printer is connected to the power supply,
this light off indicates that the printer power is off.
5 Error light
When Lack paper in printer ; or cutter have problem; or the print head is
overheated; or the cover is not closed properly, this error indicator will
flash.

How to print a self test page

Connect printer with the power adapter, turn on power bottom and
press feed button at the same time, keep pressing the feed button until
the paper light turn off and then release the feed button, you will see a
self test page printed. In self test page, it shows the current printer
status and setting details.

How to set the beep function close or open

Connect printer to the power adapter, turn on power bottom and press
feed button at the same time, keep pressing the feed button until the
Paper light and error light all turn off, then release the feed button, then
you will see the beeper have been set closed / opened.

How to set printing density

Connect printer to the power adapter, turn on power bottom and press
feed button at the same time, keep pressing the feed button until the
Paper light and error light all turn off, and paper light turn on,then
release the feed button, then you have set the printing density
successfully.
9
 80MM Thermal Receipt Printer User Manual
How to back to factory setting:
Connect printer to the power adapter, turn on power bottom and press
feed button at the same time, keep pressing the Feed button until the
Paper light and error light all turn off, and paper light and error light turn
on again, then you will see printer print “Factory Mode set, please
restart the printer.” Now you can release button and restart the printer,
then you back to factory setting.

Cutter stuck maintenance

Method 1: Press the power switch to turn off the printer, then turn it on
again to return the cutter.
Method 2: Open the front cover of the printer, turn the gear on the print
mechanism, and make the cutter back to the initial position. Then Open
the Paper cover and install paper roll then we can print normally.

Note: do not open the cover by force, or may cause unrecoverable

damage to the print head and the cutter.

Printer driver
80MM series thermal printer driver mode has two kinds, one is using the
port for directly printing, the other is install driver in Windows system to
print.
1.port direct drive
In this way, do not need to install the driver, only need to output the
character (commands and data) directly to port, and to achieve
10
 80MM Thermal Receipt Printer User Manual
character conversion printing by printer inner hard font library. Using
port directly drive, make the print control more convenient.

If you use port direct drive mode, you need to use the print command
set to control the printer's printing, 80MM series thermal printer has
integrated the ESC/POS instruction set.

2.Install driver in windows system

To install the driver in CD under windows, you only need to call the
driver in the program to achieved print. In this way, in fact there is a
Windows driver to turn the character into a graphic dot matrix way to
print.
Windows driver installation steps and instructions:

（1） Open the driver install file ” POS-80-Series.exe”，click "ok"

（2） Click the "next step"

11
 80MM Thermal Receipt Printer User Manual

（3） Select "I accept this Agreement", click "next"

（4） Click "install"

12
 80MM Thermal Receipt Printer User Manual

（5） Setup software will automatically identify the version of the

Windows system, click "Next”

(6) Click "finish" to complete the driver installation. After this step
completed, mean the driver have been installed successfully
13
 80MM Thermal Receipt Printer User Manual

For Ethernet Port printing, pls check the following Guide.

After you have set Ethernet parameter by Hoin “Lan port setting tool” of
CD with your computer, you still need to add the Ethernet port in your
computer. Pls find POS-80-Series, right click it and choose the Printer
Properties and add the new Ethernet port in the port list. The Exact
adding way show as following pictures.

14
80MM Thermal Receipt Printer User Manual

15
80MM Thermal Receipt Printer User Manual

16
80MM Thermal Receipt Printer User Manual

17
80MM Thermal Receipt Printer User Manual

18
 80MM Thermal Receipt Printer User Manual

Printer Repair and maintenance

1. printer external and warehouse cleaning: please use a wet cloth
gently wipe the printer surface and internal paper warehouse.
2. Printer core clean: printer core must be clean on time, especially the
quality of printing is decline, cleaning methods are as follows: put cotton
dipped in anhydrous alcohol and gently wipe the printer core ceramic
parts as shown in the picture below until clean enough.
3.If find water inside printer, pls immediately disconnect the printer
power, and dry the printer naturally.

Failure Analysis:
Failure Failure cause Solution
phenomenon
Printer paper light Printer lack of Install paper correctly
and Error light paper
flashing at same
time,and make a
Di Di... beep
sound
Printer error light 1,The printer 1,Pls follow the “Cutter
flashing and make cutter problem. stuck maintenance”
a Di Di...beep 2.The printer schedule above to solve.
sound head is 2,Open the cover and
overheated dissipate heat fully then go
3. The cover not on printing.
closed well 3. Confirm Cover Closed
well
19
 80MM Thermal Receipt Printer User Manual
When printing, Thermal paper Pls install the paper in a
only paper install reverse opposite direction
running but no
print
The printer print The print head Put cotton dipped in
fuzzy not clean for a anhydrous alcohol and
long time gently wipe the printer
core ceramic parts until
clean enough
The thermal Pls choose high quality
paper is not good thermal paper

There is no The power Pls check power adaptor

response on adaptor not is connected well and
printer connected power switch is on.
Printer can self Driver port Pls select the correct print
test, but can not selection error driver port based on the
print online actual connection port
Printer serial port Bit rate selection Pls set the COM baud rate
does not print or error according to the COM info
print garbled on self test page

20