Product overview

FERROTOP™

DENSIPHALT®
DENSITOP®

Densiphalt® . Densitop® . Ferrotop™

– all Densit® products have an extremely dense
structure with very low water content
24 High durability Joint-free
2008 2009 2010 2011

18 Densiphalt®
6 and Densitop® withstand tough Densiphalt® is joint-free which increases
daily wear from heavy vehicles, aircrafts, speed of installation, reduces costs and
12
2 forklift trucks, etc. requires only minimum maintenance.

24
Dust-free surface 24
24 Early trafficking
2008 2009 2010 feb.
Jan. 2011 mar. apr.

18 6 The dense surface of Densiphalt® and Den- 18 6 Densiphalt® and Densitop® can usually be
18 6 taken in to use after only 24 hours’ har-
sitop® makes them dust free and therefore
12
2 12
2 dening time at 20 °C. This ensures minimum
ideal for indoor areas in warehouses, produ- 12
2
ction facilities and offices, etc. downtime for the customer’s operations and
activities.
IIIIIIII
IIIIIIII II III
II III II
II

II
II

Withstands high loads Resistant to freeze-thaw

IIIIIIII
II

III
II

Jan. feb. mar. apr.

IIIIIIII
III

IIIIIIII

24
IIIIIIII

2008 2009 2010 2011

Densiphalt® Iand Densitop® are both docu-
III

Densitop® and Densiphalt® withstand very

III

II
II
II

III
II IIIIIIIII
18 6 static loads from racking systems, I
II
II

III
high
III
IIIIII mented and classified as ”very freeze-/thaw-
resistant”, which means they can withstand
2 forklift trucks, heavy vehicles, containers and
12
aircrafts. Furthermore, they are very resistant repeated temperature fluctuations.
to rutting.

2008 2009 2010 2011 Easy to2008

clean
2009 2010 2011
Maintenance-free
Jan. feb. mar. apr.
Densitop® and Densiphalt® floorings are Densiphalt® and Densitop® are extremely
easy to clean because of their dense and tough floorings that last for many years with
high strength surfaces. Densitop® with- no maintenance. A small degree of main-
stands effective cleaning with hot water and tenance should, however, be expected for
steam cleaning under pressure. outdoor surfaces and in the food industry.
IIIIIIII
II III
II

Swift installation
II

Impermeable
II

Jan. feb. mar. apr.

IIIIIIII
III

Jan. feb. mar. apr.

IIIIIIII

Densiphalt® and Densitop® are applied

III

The ekstreme dense surface of Densiphalt®II II

II
II

III
IIIIIIII
swiftly and efficiently on both smaller and and Densitop® make them liquid-resistant,
large areas. chloride-resistant and resistant to many
chemicals.
IIIIIIII
II III
II
II
II

24
IIIIIIII
III

2008 2009 2010 2011 2008 2009 2010 2011

01-07-2010
IIIIIIII

III

18 6 II II
II
II

III
IIIIIIII

12
2

2008 2009 2010 2011 Jan. feb. mar. apr. Jan. feb. mar. apr.
Product overview

FERROTOP™

DENSIPHALT®
DENSITOP®

If the requirements are ... A If the requirements are ...

B If the requirements are ...
C
• Joint-free pavement. • Unusually high bearing capacity – re- .. the same properties as for point B, but
• Flexibility. sistance to high point loads. also an improved bonding due to:
• Driving and walking comfort. • High impact resistance. • Contaminated base course.
• Superior resistance to rutting. • High wear resistance. • Weak base course.
• High bearing capacity – resistance to • Resistance to steam cleaning. • Base course other than concrete.
point loading from, for example, racking • Temperature resistance from -70°C to
systems. +250°C.
• Base course of concrete, asphalt, paving • Negligible joints - only above move-
blocks or similar. ment joints in base concrete.
• Swift installation and trafficking. • Concrete base course.
• Possible installation in wet environ-
ment.

... the recommandation is: ... the recommandation is: ... the recommandation is:

Densiphalt® Densitop® FerrotopTM

Semi-flexible industrial flooring and Industrial flooring systems. Anchored flooring systems.
pavement systems. The topping consists of a high-strength The topping consists of a high-strength
The topping consists of an open-graded cement-based mortar combined with cement-based mortar combined with
asphalt, with the voids filled with a high- hard-wearing aggre­gates. Densi­top® is hard-wearing aggregates, mechanically
strength cement-based mortar. especially suitable for areas exposed to bonded to the subbase by one or two
extre­mely high loadings and where the layers of reinforcement mesh.
Densiphalt® is especially well suited to
heavily trafficked areas, that require a hygiene require­ments are strict. This system is designed especially for
rut-resistant, wear-resistant and joint-free Several va­ri­ations of Densitop® are repairing flooring with weak or contami-
surface. avail­able and selection should be based nated base concrete.
either on the pri­ority of these perform-
ance features:
• Slip resistance.
• Wear resistance.
• Impact resistance.
• Chemical resistance.
.. or on the following installation
requirements:
• Maximum permitted thickness of
flooring layer.
• Evenness of base concrete.

Thickness: 30-100 mm Thickness: 5-25 mm Thickness: 23-35 mm

01-07-2010

Densit ApS
Tel.: +45 9816 7011
Fax: +45 8818 4979
E-mail: [email protected]
www.densit.com