We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
LIST OF STANDARDS USED IN UT :
Reference
IS 2417 - 1977
1S 3664 - 1981
IS 4225 - 1979
oe ‘es
IS 4904 - 1982
__18 6394 - son
IS 7343 - 1974
1S 7666 - 1975
1S 8791 - 1978
1S 9346 » 1979
1S 11626 - 1986
1S 11630 - 1986
Description
Glossary of terms relating to Ultrasonic Testing
(first revision)
Code of practise for ultrasonic pulse-echo testing
by contact & immersion methods (first revision)
Recommended Practise for straight beam ultrasonic
testing.of steel plate (first-revision).
Recommerided Practise for UT of welds in ferretic
steels ( 1st revision )
Specification for reference block for calibration
of UT fiaw detectors ( 2nd revision )
Code of practise for UT of Metallic Seani less pipes
and tabular products.
Code of practise for UT of ferrous welded pipes &
tabular products.
Recommended procedure for UT of ferretic castings
of carbon & low allo steels.
Code of practise for ultrasonic flaw detection of
ferretic steel forgings.
Recommended practise for certification of NDT
- personnel for UT.
Recommended practise for UT and Acceptance for
Forging quality steel blooms.
Method for UT of steel plates for pressure vessels
& special applications.(ASTM) Amorican Society of Tosting Materials : ( Figure in bracket shows Part No.)
A 388 - 78
A418 -
A435 - 75
AS03 - 75
AS31 - 79
A577 - 77
A578 - 78
A609 = 78> ~~
A 24-78
B548 - 76
B594 - 74
D 2845 - 69 (76)
E113 - 74
E114 - 75
£127 +75
E 164° - 74
Recommended practise for Ultrasonic examination of
heavy steel forgings (5).
UT'& inspection of turbine & generator steel rotor
forgings (5).
Specification for straight beam ultrasonic examination of
steel plates for pressure vessels (4).
Specification for ultrasonic ultrasonic examination of large
forged crankshalts (5).
Recommended practise for ultrasonic inspection of
turbine generator steel retaining rings (5).
Specification for ultrasonic angle beam examination
of steel plates.
* Specification for straight beam ep examination
of plain & clad steel plates for special applications (4)
‘Specification for longitudinal beam ultrasonic inspection
of carbon & low alloy steel castings (2).
Specification for UT of carbon steel axles heat
treated / not heat treated for Railway use (4).
Method & specification for UT of Aluminium alloy plate
for pressure vessels (7).
Ultrasonic inspection of Al-alloy wrought products for
aerospace applications (7).
Specification for UT of rock; method for determining pulse
velocities, elastic constants - laboratory test (19).
Recommended practise for UT by the resonance method.
Recommended practise for ultrasonic pulse-echo straight
beam testing by contact method (44).
Reconmmantes practise for fabricating & checking AL
alloy ultrasonic standard reference blocks (11)
Recommended practise for ultrasonic contact
examination of weldments (11).E214 - 79 Recommended practise for immersed ultrasonic testing by
the reflection method using pulse longitudinal waves (11).
Ultrasonic inspection of longitudinal & spiral welds of
Bueibeiodatics a fsa -echo UT system (11).
Recommended practise for fabrication & control of steel
reference blocks Peet in- ultrasonic lapection a.
E 428 - 80
E494 - 75(80) ,
materials € 4).
E500 - 74 Defination of terms relating to ultrasonic testing (11).