INSTRUMENT DATA SHEET FOR Doc. No.

SNO-I-DS-001
SHUTDOWN AND BLOWDOWN VALVES REV. 0 Page 2 of 174
SENORO GAS DEVELOPMENT PROJECT DATE. 07-Feb-14

TABULATION OF REVISED PAGES

REVISION REVISION REVISION

SHEET SHEET SHEET
B C C1 0 B C C1 0 B C C1 0
1 X 52 X X X X 103 X X X X
2 X X X X 53 X X X X 104 X X X X
3 X X 54 X X X X 105 X X X X
4 X X X X 55 X X X X 106 X X X X
5 X X X X 56 X X X X 107 X X X
6 X X X X 57 X X X X 108 X X X
7 X X X X 58 X X X X 109 X X X
8 X X X X 59 X X X X 110 X X X
9 X X X X 60 X X X X 111 X X X
10 X X X X 61 X X X X 112 X X
11 X X X X 62 X X X X 113 X X
12 X X X X 63 X X X X 114 X X
13 X X X X 64 X X X X 115 X X
14 X X X X 65 X X X X 116 X X
15 X X X X 66 X X X X 117 X X
16 X X X X 67 X X X X 118 X X
17 X X X X 68 X X X X 119 X
18 X X X X 69 X X X X 120 X
19 X X X X 70 X X X X 121 X
20 X X X X 71 X X X X 122 X
21 X X X X 72 X X X X 123 X
22 X X X X 73 X X X X 124 X
23 X X X X 74 X X X X 125 X
24 X X X X 75 X X X X 126 X
25 X X X X 76 X X X X 127 X
26 X X X X 77 X X X X 128 X
27 X X X X 78 X X X X 129 X
28 X X X X 79 X X X X 130 X
29 X X X X 80 X X X X 131 X
30 X X X X 81 X X X X 132 X
31 X X X X 82 X X X X 133 X
32 X X X X 83 X X X X 134 X
33 X X X X 84 X X X X 135 X
34 X X X X 85 X X X X 136 X
35 X X X X 86 X X X X 137 X
36 X X X X 87 X X X X 138 X
37 X X X X 88 X X X X 139 X
38 X X X X 89 X X X X 140 X
39 X X X X 90 X X X X 141 X
40 X X X X 91 X X X X 142 X
41 X X X X 92 X X X X 143 X
42 X X X X 93 X X X X 144 X
43 X X X X 94 X X X X 145 X
44 X X X X 95 X X X X 146 X
45 X X X X 96 X X X X 147 X
46 X X X X 97 X X X X 148 X
47 X X X X 98 X X X X 149 X
48 X X X X 99 X X X X 150 X
49 X X X X 100 X X X X 151 X
50 X X X X 101 X X X X 152 X
51 X X X X 102 X X X X 153 X
 INSTRUMENT DATA SHEET FOR Doc. No. SNO-I-DS-001
SHUTDOWN AND BLOWDOWN VALVES REV. 0 Page 3 of 174
SENORO GAS DEVELOPMENT PROJECT DATE. 07-Feb-14

TABULATION OF REVISED PAGES

REVISION REVISION REVISION

SHEET SHEET SHEET
B C C1 0 B C C1 0 B C C1 0
154 X
155 X
156 X
157 X
158 X
159 X
160 X
161 X
162 X
163 X
164 X
165 X
166 X
167 X
168 X
169 X
170 X
171 X
172 X
173 X
174 X
 INSTRUMENT DATA SHEET FOR Doc. No. SNO-I-DS-001
SHUTDOWN AND BLOWDOWN VALVES REV. 0 Page 4 of 174
SENORO GAS DEVELOPMENT PROJECT DATE. 07-Feb-14

REVISION SUMMARY

REV. DATE DESCRIPTION OF CHANGE

B 28-Jan-13 Issue for COMPANY Approval

C 12-Apr-13 Approved for Construction
- Tag No. & Line No. for all items have been checked and revised
as per P&ID
- SDV-4101A / 4101B is deleted, because of delete of P&ID
- XV-6073E / XV-6030E is deleted because it will be provided by
Loading Arm Package
- XV-6070A / 6070B is added
- XV-6020A / 6020C is added
- XV-6020B / 6020D is added
- SDV-8032A / 8032B is added
C1 23-May-13 Approved for Construction
- Floating Type is changed to Trunnion Type
- Leakage Class (ANSI) is changed to Leakage Rate (ISO 5208)
- Using Metal Seat for Hot Oil Service and High Temperature
(above 450℉)
- Anti Static is added
- ‘All SDV & BDV shall be designed & tested as per API 6D’ is
added
- ‘Valve stem shall be Anti-Blowout Type’ is added
- SDV-3102B/3202B are added at the inlet of TEG Contactor
- SDV-4032A, 4032, 4033, 4015B, 4035, 4013A are added as per
HTAS P&ID
0 07-Feb-14 Approved for Construction
- ‘ SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2
certificate as a minimum’ is added on notes
- ‘ Vendor shall refer to SNO-G-ES-008, Standard Specification for
Surface preparation, Painting, Galvanizing’ is added on notes
- SDV-7006A is added as per Eng. Development
- SDV-4018A is added as per HTAS P&ID
- SDV-2102C / 2202C are added as per JOB Comment
- SDV-6051C is added as per Eng. Development
 ON-OFF VALVE INDEX

No. Tag No. EA P&ID No. Tag No. EA P&ID No. Tag No. EA P&ID
1 SDV-0005G 1 SNO-R-PI-003 61 SDV-6204A 1 SNO-R-PI-054 121 BDV-2223D 1 SNO-R-PI-316
2 SDV-0016G 1 SNO-R-PI-003 62 XV-6005A 1 SNO-R-PI-020 122 SDV-3102A 1 SNO-R-PI-401
3 SDV-0001G 1 SNO-R-PI-003 63 XV-6001A 1 SNO-R-PI-020 123 SDV-3202A 1 SNO-R-PI-411
4 SDV-0007G 1 SNO-R-PI-003 64 XV-6001B 1 SNO-R-PI-021 124 SDV-3102F 1 SNO-R-PI-401
5 SDV-0017G 1 SNO-R-PI-003 65 XV-6005B 1 SNO-R-PI-021 125 SDV-3202F 1 SNO-R-PI-411
6 SDV-0002G 1 SNO-R-PI-003 66 BDV-5108A 1 SNO-R-PI-023B 126 SDV-3116A 1 SNO-R-PI-402A
7 SDV-0030A 1 SNO-R-PI-003 67 BDV-5208A 1 SNO-R-PI-055A 127 SDV-3216A 1 SNO-R-PI-412A
8 BDV-0001N 1 SNO-R-PI-003 68 BDV-5020A 1 SNO-R-PI-024 128 SDV-3116J 1 SNO-R-PI-402A
9 BDV-0001P 1 SNO-R-PI-003 69 SDV-5020C 1 SNO-R-PI-024 129 SDV-3216J 1 SNO-R-PI-412A
10 BDV-0001R 1 SNO-R-PI-003 70 XV-5020B 1 SNO-R-PI-024 130 BDV-3116K 1 SNO-R-PI-402A
11 BDV-0001T 1 SNO-R-PI-003 71 SDV-6040A 1 SNO-R-PI-025 131 BDV-3216K 1 SNO-R-PI-412A
12 SDV-1101A 1 SNO-R-PI-003B 72 SDV-5030A 1 SNO-R-PI-027 132 SDV-3104A 1 SNO-R-PI-403
13 SDV-1201A 1 SNO-R-PI-003B 73 SDV-6050A 1 SNO-R-PI-028 133 SDV-3204A 1 SNO-R-PI-413
14 SDV-1103A 1 SNO-R-PI-004 74 XV-7002B 1 SNO-R-PI-031 134 SDV-3104B 1 SNO-R-PI-403
15 SDV-1203A 1 SNO-R-PI-039 75 SDV-7010A 1 SNO-R-PI-032 135 SDV-3204B 1 SNO-R-PI-413
16 SDV-1102A 1 SNO-R-PI-005 76 SDV-5010D 1 SNO-R-PI-033 136 SDV-3110A 1 SNO-R-PI-404
17 SDV-1202A 1 SNO-R-PI-040 77 XV-6010A 1 SNO-R-PI-034 137 SDV-3210A 1 SNO-R-PI-414
18 SDV-1102B 1 SNO-R-PI-005 78 XV-6010B 1 SNO-R-PI-034 138 SDV-6051A 1 SNO-R-PI-602
19 SDV-1202B 1 SNO-R-PI-040 79 XV-6010C 1 SNO-R-PI-034 139 SDV-6051B 1 SNO-R-PI-602
20 BDV-1102C 1 SNO-R-PI-005 80 XV-6010D 1 SNO-R-PI-034 140 SDV-6060A 1 SNO-R-PI-604
21 BDV-1202C 1 SNO-R-PI-040 81 SDV-6030A 1 SNO-R-PI-037 141 SDV-6054A 1 SNO-R-PI-605
22 SDV-1104A 1 SNO-R-PI-006 82 BDV-5041 1 SNO-R-PI-057 142 SDV-6054B 1 SNO-R-PI-605
23 SDV-1204A 1 SNO-R-PI-041 83 SDV-6007 1 SNO-R-PI-059 143 SDV-6053F 1 SNO-R-PI-606
24 SDV-1104B 1 SNO-R-PI-006 84 SDV-8065A 1 SNO-R-PI-101 144 SDV-6053G 1 SNO-R-PI-606
25 SDV-1204B 1 SNO-R-PI-041 85 SDV-8065C 1 SNO-R-PI-101 145 BDV-6053D 1 SNO-R-PI-606
26 SDV-1104C 1 SNO-R-PI-006 86 BDV-8065B 1 SNO-R-PI-101 146 XV-6070A 1 SNO-R-PI-010B
27 SDV-1204C 1 SNO-R-PI-041 87 BDV-8066A 1 SNO-R-PI-102 147 XV-6070B 1 SNO-R-PI-010B
28 BDV-1104D 1 SNO-R-PI-006 88 SDV-8145J 1 SNO-R-PI-105 148 XV-6020F 1 SNO-R-PI-034B
29 BDV-1204D 1 SNO-R-PI-041 89 SDV-8245J 1 SNO-R-PI-134 149 XV-6020H 1 SNO-R-PI-034B
30 SDV-1105A 1 SNO-R-PI-007 90 SDV-8145I 1 SNO-R-PI-105 150 XV-6020G 1 SNO-R-PI-034B
31 SDV-1205A 1 SNO-R-PI-042 91 SDV-8245I 1 SNO-R-PI-134 151 XV-6020I 1 SNO-R-PI-034B
32 SDV-1105B 1 SNO-R-PI-007 92 SDV-8026 1 SNO-R-PI-130 152 SDV-8032A 1 SNO-R-PI-126
33 SDV-1205B 1 SNO-R-PI-042 93 SDV-8067B 1 SNO-R-PI-131 153 SDV-8032B 1 SNO-R-PI-126
34 BDV-1105C 1 SNO-R-PI-007 94 SDV-8067C 1 SNO-R-PI-131 154 SDV-4032A 1 SNO-R-PI-701
35 BDV-1205C 1 SNO-R-PI-042 95 SDV-6071A 1 SNO-R-PI-150 155 SDV-4032 1 SNO-R-PI-701
36 SDV-6101 1 SNO-R-PI-008 96 SDV-6078A 1 SNO-R-PI-150 156 SDV-4033 1 SNO-R-PI-701
37 SDV-6201 1 SNO-R-PI-043 97 BDV-6071E 1 SNO-R-PI-150 157 SDV-4015B 1 SNO-R-PI-706
38 SDV-6101A 1 SNO-R-PI-008 98 SDV-6075A 1 SNO-R-PI-152 158 SDV-4035 1 SNO-R-PI-714
39 SDV-6201A 1 SNO-R-PI-043 99 SDV-6073 1 SNO-R-PI-152 159 SDV-4013A 1 SNO-R-PI-704
40 BDV-6101B 1 SNO-R-PI-008 100 SDV-2102A 1 SNO-R-PI-301 160 SDV-7006A 1 SNO-R-PI-031
41 BDV-6201B 1 SNO-R-PI-043 101 SDV-2202A 1 SNO-R-PI-311 161 SDV-4018A 1 SNO-R-PI-710
42 SDV-6101C 1 SNO-R-PI-008 102 SDV-2102B 1 SNO-R-PI-301 162 SDV-2102C 1 SNO-R-PI-301
43 SDV-6201C 1 SNO-R-PI-043 103 SDV-2202B 1 SNO-R-PI-311 163 SDV-2202C 1 SNO-R-PI-311
44 SDV-6073A 1 SNO-R-PI-010D 104 SDV-2104D 1 SNO-R-PI-302 164 SDV-6051C 1 SNO-R-PI-602
45 SDV-6105B 1 SNO-R-PI-013 105 SDV-2204D 1 SNO-R-PI-312 165 -
46 SDV-6205B 1 SNO-R-PI-048 106 SDV-2104C 1 SNO-R-PI-302 166 -
47 SDV-6107B 1 SNO-R-PI-014 107 SDV-2204C 1 SNO-R-PI-312 167 -
48 SDV-6207B 1 SNO-R-PI-049 108 SDV-2106B 1 SNO-R-PI-304 168 -
49 SDV-6107D 1 SNO-R-PI-014 109 SDV-2206B 1 SNO-R-PI-314 169 -
50 SDV-6207D 1 SNO-R-PI-049 110 SDV-2106A 1 SNO-R-PI-304
51 BDV-6106A 1 SNO-R-PI-014 111 SDV-2206A 1 SNO-R-PI-314
52 BDV-6206A 1 SNO-R-PI-049 112 SDV-2105A 1 SNO-R-PI-305
53 SDV-6040B 1 SNO-R-PI-015 113 SDV-2205A 1 SNO-R-PI-315
54 BDV-5102A 1 SNO-R-PI-017 114 SDV-2105B 1 SNO-R-PI-305
55 BDV-5202A 1 SNO-R-PI-071 115 SDV-2205B 1 SNO-R-PI-315
56 SDV-5102B 1 SNO-R-PI-017 116 SDV-2123F 1 SNO-R-PI-306
57 SDV-5202B 1 SNO-R-PI-071 117 SDV-2223F 1 SNO-R-PI-316
58 SDV-5104A 1 SNO-R-PI-018 118 SDV-2123G 1 SNO-R-PI-306
59 SDV-5204A 1 SNO-R-PI-072 119 SDV-2223G 1 SNO-R-PI-316
60 SDV-6104A 1 SNO-R-PI-019 120 BDV-2123D 1 SNO-R-PI-306

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0005G 1 (One)
2 Manufacturer Model Flowserve 6"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well SN0-WH-0005 to Production and Test Manifold
7 Line No. 6"-HF-0034-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG418SR3-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 1 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0016G 1 (One)
2 Manufacturer Model Flowserve 6"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well SN0-WH-0016 to Production and Test Manifold
7 Line No. 6"-HF-0035-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG320SR7-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Fluid
Fl id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 2 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0001G 1 (One)
2 Manufacturer Model Flowserve 6"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well SN0-WH-0001 to Production and Test Manifold
7 Line No. 6"-HF-0045-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG418SR3-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 3 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0007G 1 (One)
2 Manufacturer Model Flowserve 6"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well SN0-WH-0007 to Production and Test Manifold
7 Line No. 6"-HF-0043-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG320SR7-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Fluid
Fl id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 4 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0017G 1 (One)
2 Manufacturer Model Flowserve 6"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well SN0-WH-0017 to Production and Test Manifold
7 Line No. 6"-HF-0044-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG320SR7-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Fluid
Fl id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 5 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0002G 1 (One)
2 Manufacturer Model Flowserve 16"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Well Senoro Cluster-2 to Production and Test Manifold
7 Line No. 16"-HF-0077-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 16 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG632SR5-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Fluid
Fl id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 100 16 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 6 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-0030A 1 (One)
2 Manufacturer Model Flowserve 8"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service Test Header From Senoro Cluster-2 to Test Manifold
7 Line No. 8"-HF-0090-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolt Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-14
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Fluid
Fl id
36 Phase Gas/Liquid/Aqueous
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 100 8 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 7 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-0001N 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ SSSC
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Production Manifold Header Train #1 to HP Flare
7 Line No. 2"-HF-0110-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA451
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas / Liquid
37 Operating Pressure 905 psig
38 Design Pressure 3200 psig
39 Operating Temperature 180 ºF
40 Design Temperature -20 / 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 8 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-0001P 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ SSSC
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Production Manifold Header Train #2 to HP Flare
7 Line No. 2"-HF-0111-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA451
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas / Liquid
37 Operating Pressure 905 psig
38 Design Pressure 3200 psig
39 Operating Temperature 180 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 9 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-0001R 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ SSSC
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Test Manifold Header Train #1 to HP Flare
7 Line No. 2"-HF-0112-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA451
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 2 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas / Liquid
37 Operating Pressure 905 psig
38 Design Pressure 3200 psig
39 Operating Temperature 180 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 2 Seconds
45 (Seconds) Actual 2 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 10 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-0001T 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ SSSC
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003
6 Service From Test Manifold Header Train #2 to HP Flare
7 Line No. 2"-HF-0113-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA451
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 2 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas / Liquid
37 Operating Pressure 905 psig
38 Design Pressure 3200 psig
39 Operating Temperature 180 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 2 Seconds
45 (Seconds) Actual 2 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 11 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1101A 1 (One)
2 Manufacturer Model Flowserve 16"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003B
6 Service From Production Manifold (Train 1) to Production Cooler E-1101 (Train 1)
7 Line No. 16"-HF-1002-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 16 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG632SR5-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Vapor
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 100 16 in Sch 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 12 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1201A 1 (One)
2 Manufacturer Model Flowserve 16"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-003B
6 Service From Production Manifold (Train 2) to Production Cooler E-1201 (Train 2)
7 Line No. 16"-HF-2002-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 16 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG632SR5-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Vapor
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 100 16 in Sch 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 13 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1103A 1 (One)
2 Manufacturer Model Flowserve 8"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-004
6 Service From Test Header to Test Separator Cooler
7 Line No. 8"-HF-1005-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Vapor
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 100 8 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 14 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1203A 1 (One)
2 Manufacturer Model Flowserve 8"TBF35FQBGZ SSSV
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-039
6 Service From Test Header to Test Separator Cooler
7 Line No. 8"-HF-2005-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 ASTM A182 F51
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b FlFluid
id
36 Phase Gas/Liquid/Vapor
37 Operating Pressure 920 psig
38 Design Pressure 3200 psig
39 Operating Temperature 153 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 3200 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 100 8 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 15 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1102A 1 (One)
2 Manufacturer Model Samjin TB-09F04RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-005
6 Service Production Separator Liquid Outlet To Hydro Cyclone
7 Line No. 4"-WW-1001-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 80S 4 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 16 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1202A 1 (One)
2 Manufacturer Model Samjin TB-09F04RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-040
6 Service Production Separator Liquid Outlet To Hydro Cyclone
7 Line No. 4"-WW-2001-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 80S 4 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 17 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1102B 1 (One)
2 Manufacturer Model Samjin TB-09F04RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-005
6 Service Production Separator Liquid Outlet To Condensate Surge Vessel
7 Line No. 4"-HL-1020-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Liquid
Li id
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 80S 4 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 18 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1202B 1 (One)
2 Manufacturer Model Samjin TB-09F04RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-040
6 Service Production Separator Liquid Outlet To Condensate Surge Vessel
7 Line No. 4"-HL-2003-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Liquid
Li id
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 80S 4 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 19 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1102C 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-005
6 Service Production Separator Gas Outlet To HP Flare Header
7 Line No. 3"-HF-1105-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 20 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1202C 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-040
6 Service Production Separator Gas Outlet To HP Flare Header
7 Line No. 3"-HF-2105-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 21 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1104A 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-006
6 Service Test Separator Liquid Outlet To Degassing Coloumn
7 Line No. 3"-WW-1001-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 22 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1204A 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-041
6 Service Test Separator Liquid Outlet To Degassing Coloumn
7 Line No. 3"-WW-2041-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 23 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1104B 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-006
6 Service Test Separator Liquid Outlet To Condensate Surge Vessel
7 Line No. 3"-HL-1050-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Liquid
Li id
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 24 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1204B 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-041
6 Service Test Separator Liquid Outlet To Condensate Surge Vessel
7 Line No. 3"-HL-2050-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b Liquid
Li id
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 25 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1104C 1 (One)
2 Manufacturer Model Samjin TB-09F10RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-006
6 Service Test Separator Gas Outlet To Condensate Surge Vessel
7 Line No. 10"-HG-1006-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 100 10 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 26 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1204C 1 (One)
2 Manufacturer Model Samjin TB-09F10RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-041
6 Service Test Separator Gas Outlet To Condensate Surge Vessel
7 Line No. 10"-HG-2006-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 100 10 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 27 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1104D 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-006
6 Service Production Separator Gas Outlet To HP Flare Header
7 Line No. 2"-HG-1007-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 28 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1204D 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-041
6 Service Production Separator Gas Outlet To HP Flare Header
7 Line No. 2"-HG-2007-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 29 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1105A 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-007
6 Service Production Filter Coalescer To Closed Drain Header
7 Line No. 2"-DC-1116-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 30 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1205A 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-042
6 Service Production Filter Coalescer To Closed Drain Header
7 Line No. 2"-DC-2107-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 31 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1105B 1 (One)
2 Manufacturer Model Samjin TB-09F12RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-007
6 Service Production Filter Coalescer To Amine Absorber
7 Line No. 12"-HG-1050-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 32 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-1205B 1 (One)
2 Manufacturer Model Samjin TB-09F12RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-042
6 Service Production Filter Coalescer To Amine Absorber
7 Line No. 12"-HG-2050-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 33 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1105C 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-007
6 Service Production Filter Coalescer To HP Flare Header
7 Line No. 2"-HG-1004-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G
Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 34 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-1205C 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-042
6 Service Production Filter Coalescer To HP Flare Header
7 Line No. 2"-HG-2004-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SO1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G
Gas
36 Phase Gas/Vapour
37 Operating Pressure 905 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 35 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6101 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-008
6 Service Condensate Surge Vessel To Condensate Coalescer
7 Line No. 4"-HL-1301-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 10S 4 in Sch. 10S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 36 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6201 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-043
6 Service Condensate Surge Vessel To Condensate Coalescer
7 Line No. 4"-HL-2301-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 10S 4 in Sch. 10S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 37 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6101A 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-008
6 Service Condensate Surge Vessel To Degassing Coloumn
7 Line No. 2"-WW-1085-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 38 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6201A 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-043
6 Service Condensate Surge Vessel To Degassing Coloumn
7 Line No. 2"-WW-2085-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 39 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6101B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-008
6 Service From Condensate Surge Vessel Gas Outlet To HP Flare Header
7 Line No. 2"-HG-1010-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b GGas
36 Phase Gas/Vapour
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 53 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 40 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6201B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-043
6 Service From Condensate Surge Vessel Gas Outlet To HP Flare Header
7 Line No. 2"-HG-2010-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b GGas
36 Phase Gas/Vapour
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 53 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 41 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6101C 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-008
6 Service Condensate Surge Vessel To LP Fuel Gas Treatment
7 Line No. 3"-HG-1009-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 10S 3 in Sch. 10S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 42 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6201C 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-043
6 Service Condensate Surge Vessel To LP Fuel Gas Treatment
7 Line No. 3"-HG-2009-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 155 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 10S 3 in Sch. 10S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 43 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6073A 1 (One)
2 Manufacturer Model Flowserve 16"TBF21FRBGZ C60C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-010D
6 Service From Acid Gas Metering to Loading Arm
7 Line No. 16"-SA-0011-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA034
10 Body Size Body Form 16 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7M A194 2HM
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG318SR4-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl
Fluid
id S
Sulphuric
l h i AAcid
id
36 Phase Liquid
37 Operating Pressure 129 psig
38 Design Pressure 210 psig
39 Operating Temperature AMB ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 20 16 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 44 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6105B 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-013
6 Service Hot Oil Supply to Stabilizer Reboiler
7 Line No. 6"-OH-1130-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D SS316+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hot
H t Oil
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 450 ºF
40 Design Temperature 500 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 45 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6205B 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-048
6 Service Hot Oil Supply to Stabilizer Reboiler
7 Line No. 6"-OH-2130-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D SS316+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hot
H t Oil
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 450 ºF
40 Design Temperature 500 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 46 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6107B 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-014
6 Service Stabilizer Reflux Drum to Close Drain Header
7 Line No. 2"-HL-1171-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006B-100-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 47 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6207B 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-049
6 Service Stabilizer Reflux Drum to Close Drain Header
7 Line No. 2"-HL-2171-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006B-100-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 48 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6107D 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-014
6 Service Stabilizer Reflux Drum to LP Fuel Gas Treatment
7 Line No. 4"-HG-1017-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40S 4 in Sch. 40S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 49 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6207D 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-049
6 Service Stabilizer Reflux Drum to LP Fuel Gas Treatment
7 Line No. 4"-HG-2017-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40S 4 in Sch. 40S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 50 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6106A 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-014
6 Service From Stabilizer Overhead Condenser to HP Flare Header
7 Line No. 2"-HF-1057-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1S-006B-100-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 60 / 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 51 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6206A 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-049
6 Service From Stabilizer Overhead Condenser to HP Flare Header
7 Line No. 2"-HF-2057-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1S-006B-100-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 120 psig
38 Design Pressure 210 + F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 60 / 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 52 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6040B 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-015
6 Service Stabilizer Overhead Filter Coalescer to Close Drain Header
7 Line No. 2"-HL-1014-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006B-100-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 114 psig
38 Design Pressure 210 psig
39 Operating Temperature 109 ºF
40 Design Temperature -20 / 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 53 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5102A 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-017
6 Service Gas/Gas Exchanger Outlet to HP Flare Header
7 Line No. 3"-HG-1616-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature -20 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 120 3 in Sch. 120
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 54 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5202A 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-071
6 Service Gas/Gas Exchanger Outlet to HP Flare Header
7 Line No. 3"-HG-2616-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature -20 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 120 3 in Sch. 120
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 55 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5102B 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-017
6 Service Gas/Gas Exchanger Outlet to CPP Gas Metering
7 Line No. 12"-HG-1022-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature -44 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 56 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5202B 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-071
6 Service Gas/Gas Exchanger Outlet to CPP Gas Metering
7 Line No. 12"-HG-2022-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b G Gas
36 Phase Gas/Vapour
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature -44 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 57 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5104A 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-018
6 Service Outlet to Low Temperature Separator to Condensate Surge Vessel
7 Line No. 2"-HL-1703-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 60 ºF
40 Design Temperature 130 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 58 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5204A 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-072
6 Service Outlet to Low Temperature Separator to Condensate Surge Vessel
7 Line No. 2"-HL-2020-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 60 ºF
40 Design Temperature 130 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 59 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6104A 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-019
6 Service Stabilizer Condensate Cooler to Condensate Storage Tank
7 Line No. 4"-HL-1120-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA008
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 122 psig
38 Design Pressure 210 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 60 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6204A 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-054
6 Service Stabilizer Condensate Cooler to Condensate Storage Tank
7 Line No. 4"-HL-2120-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA008
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 122 psig
38 Design Pressure 210 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 61 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6005A 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-020
6 Service Condensate Storage Tank SN0-T-6001 Inlet
7 Line No. 6"-HL-1015-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 122 psig
38 Design Pressure 210 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 62 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6001A 1 (One)
2 Manufacturer Model Samjin TB-01F12RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-020
6 Service Condensate Storage Tank SN0-T-6001 Outlet to Condensate Transfer Pump
7 Line No. 12"-HL-0003-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0250-280-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 8 psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 20 12 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 63 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6001B 1 (One)
2 Manufacturer Model Samjin TB-01F12RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-021
6 Service Condensate Storage Tank SN0-T-6002 Outlet to Condensate Transfer Pump
7 Line No. 12"-HL-0004-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0250-280-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 8 psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 20 12 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 64 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6005B 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-021
6 Service Condensate Degassing Coloumn Inlet
7 Line No. 6"-HL-0001-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 122 psig
38 Design Pressure 210 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 65 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5108A 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-023B
6 Service From Propane Refrigerant Package to HP Flare Header
7 Line No. 4"-HG-1052-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA008
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 231 psig
38 Design Pressure 275 psig
39 Operating Temperature 140 ºF
40 Design Temperature -20 / 210 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 66 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5208A 1 (One)
2 Manufacturer Model Samjin TB-03F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-055A
6 Service From Propane Refrigerant Package to HP Flare Header
7 Line No. 4"-HG-2052-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA008
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 231 psig
38 Design Pressure 275 psig
39 Operating Temperature 140 ºF
40 Design Temperature -20 / 210 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 67 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5020A 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-024
6 Service Sales Gas Export Launcher to HP Flare Header
7 Line No. 2"-HG-0021-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 825 psig
38 Design Pressure 1100 psig
39 Operating Temperature 100 ºF
40 Design Temperature -10 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch. 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 68 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5020C 1 (One)
2 Manufacturer Model Flowserve 30"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-024
6 Service Sales Gas Export Launcher Outlet
7 Line No. 30"-HG-0002-6H
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 30 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 30 Seconds
20 Model No. Safety Factor RG832TSR3-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 825 psig
38 Design Pressure 1100 psig
39 Operating Temperature 100 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 30 in Sch. 17.48mm 30 in Sch. 17.48mm
44 Speed of Operation Design 30 SSeconds
45 (Seconds) Actual 30 SSeconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 69 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-5020B 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-024
6 Service Sales Gas Export Launcher Outlet
7 Line No. 2"-HG-0351-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 825 psig
38 Design Pressure 1100 psig
39 Operating Temperature 100 ºF
40 Design Temperature -10 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch. 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 70 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6040A 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-025
6 Service Condensate Export Flowline to Jetty
7 Line No. 8"-HL-0200-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 71 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5030A 1 (One)
2 Manufacturer Model Samjin TB-06F30RF-1X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-027
6 Service Sales Gas Pig Receiver Inlet
7 Line No. 30"-HG-0010-6H
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 30 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 30 Seconds
20 Model No. Safety Factor ALGAS 14C-8300-885-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 779 psig
38 Design Pressure 1100 psig
39 Operating Temperature 100 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 30 in Sch. 17.48mm 30 in Sch. 17.48mm
44 Speed of Operation Design 30 Seconds
45 (Seconds) Actual 30 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 72 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6050A 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-028
6 Service Condensate Export Flowline to Jetty
7 Line No. 8"-HL-0803-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 73 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-7002B 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-031
6 Service Produced Water Tank SNO-T-7002 To Water Injection Pump
7 Line No. 4"-WW-0003-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 0.1 psig
38 Design Pressure 50 psig
39 Operating Temperature 100 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 10S 4 in Sch. 10S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 74 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-7010A 1 (One)
2 Manufacturer Model Samjin TB-15F04RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-032
6 Service Produced Water to Re-Injection Well No.4
7 Line No. 4"-WW-0024-15N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA487
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0400-335-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Water
W t
36 Phase Liquid
37 Operating Pressure 1580 psig
38 Design Pressure 1800 psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1800 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 160 4 in Sch. 160
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 75 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-5010D 1 (One)
2 Manufacturer Model Samjin TB-06F20RF-1X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-033
6 Service Sales Gas Pig Receiver Inlet
7 Line No. 20"-HG-0008-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 20 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 6C-2500-585-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 775 psig
38 Design Pressure 1100 psig
39 Operating Temperature 95 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 20 in Sch. 80 20 in Sch. 80
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 76 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6010A 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034
6 Service Condensate Loading Tank SN0-T-6010A Inlet
7 Line No. 8"-HL-0014-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 77 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6010B 1 (One)
2 Manufacturer Model Samjin TB-01F24RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034
6 Service Condensate Storage Tank SN0-T-6010A Outlet To Condensate Loading Pump
7 Line No. 24"-HL-0016-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 24 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 24 Seconds
20 Model No. Safety Factor ALGAS 3C-2000-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure ATM psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 24 in Sch. 20 24 in Sch. 20
44 Speed of Operation Design 24 Seconds
45 (Seconds) Actual 24 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 78 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6010C 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034
6 Service Condensate Loading Tank SN0-T-6010B Inlet
7 Line No. 8"-HL-0015-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature 120 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 79 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6010D 1 (One)
2 Manufacturer Model Samjin TB-01F24RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034
6 Service Condensate Loading Tank SN0-T-6010B Outlet To Condensate Loading Pump
7 Line No. 24"-HL-0017-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 24 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 24 Seconds
20 Model No. Safety Factor ALGAS 3C-2000-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes (Note 10) Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure ATM psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 24 in Sch. 20 24 in Sch. 20
44 Speed of Operation Design 24 Seconds
45 (Seconds) Actual 24 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 80 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6030A 1 (One)
2 Manufacturer Model Samjin TB-01F20RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-037
6 Service Condensate Metering to Loading Arm Package
7 Line No. 20"-HL-0050-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 20 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 102 psig
38 Design Pressure 170 psig
39 Operating Temperature AMB ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 170 psig
42
43 Line Size and Sch. Inlet Outlet 20 in Sch. 20 20 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 81 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-5041 1 (One)
2 Manufacturer Model Samjin TB-06F04RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-057
6 Service Sales Gas Filter Coalescer to Buyer's Flare System
7 Line No. 4"-HG-0015-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 4 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Gas
37 Operating Pressure 740 psig
38 Design Pressure 1100 psig
39 Operating Temperature 95 ºF
40 Design Temperature -8 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 120 4 in Sch. 120
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 82 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6007 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-059
6 Service Off Spec Condensate Pumps Outlet
7 Line No. 3"-HL-0153-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA003
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 17-4PH+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 185 psig
38 Design Pressure 250 psig
39 Operating Temperature AMB ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 250 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80 3 in Sch. 80
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 83 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8065A 1 (One)
2 Manufacturer Model Flowserve 2"TBF23FRBGZ CC0C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-101
6 Service HP Fuel Gas Scrubber SNO-V-8065 To Closed Drain Header
7 Line No. 2"-DC-0010-3B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA122
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 76μm 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor CBB415 SR60 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id Hydrocarbon
H d b
36 Phase Liquid
37 Operating Pressure 300 psig
38 Design Pressure 350 psig
39 Operating Temperature 69 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 350 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 84 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8065C 1 (One)
2 Manufacturer Model Samjin TB-06F06RF-1X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-101
6 Service HP Fuel Gas Scrubber SNO-V-8065 Inlet
7 Line No. 6"-FG-0008-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA045
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id F
Fuell Gas
G
36 Phase Gas
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 120 6 in Sch. 120
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 85 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-8065B 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-101
6 Service From Fuel Gas Scrubber to Flare Header
7 Line No. 3"-FG-0032-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA044
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id F
Fuell Gas
G
36 Phase Gas
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature -20 / 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch. 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 86 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-8066A 1 (One)
2 Manufacturer Model Flowserve 2"TBF23FRBGZ CC0C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-102
6 Service From Fuel Gas Scrubber to Flare Header
7 Line No. 2"-FG-0015-3B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA122
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 76μm 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor CBB415 SR60 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fluid
Fl id F
Fuell Gas
G
36 Phase Gas
37 Operating Pressure 300 psig
38 Design Pressure 350 psig
39 Operating Temperature 70 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 350 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 87 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8145J 1 (One)
2 Manufacturer Model Samjin TB-03F10RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-105
6 Service Hot Oil Circulation Pump P-8043A/8043B to Hot Oil Heater
7 Line No. 10"-OH-1002-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 125 psig
38 Design Pressure 275 psig
39 Operating Temperature 301 ºF
40 Design Temperature 550 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 40 10 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 88 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8245J 1 (One)
2 Manufacturer Model Samjin TB-03F10RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-134
6 Service Hot Oil Circulation Pump P-8043A/8043B to Hot Oil Heater
7 Line No. 10"-OH-2002-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 125 psig
38 Design Pressure 275 psig
39 Operating Temperature 301 ºF
40 Design Temperature 550 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 40 10 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 89 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8145I 1 (One)
2 Manufacturer Model Samjin TB-03F10RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-105
6 Service Hot Oil Heater-Train 1 Outlet
7 Line No. 10"-OH-1017-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 125 psig
38 Design Pressure 275 psig
39 Operating Temperature 450 ºF
40 Design Temperature 550 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 40 10 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 90 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8245I 1 (One)
2 Manufacturer Model Samjin TB-03F10RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-134
6 Service Hot Oil Heater-Train2 Outlet
7 Line No. 10"OH-2017-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 10 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 125 psig
38 Design Pressure 275 psig
39 Operating Temperature 450 ºF
40 Design Temperature 550 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 275 psig
42
43 Line Size and Sch. Inlet Outlet 10 in Sch. 40 10 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 91 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8026 1 (One)
2 Manufacturer Model Samjin TB-09F04RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-130
6 Service Liquid Recovery Pumps Outlet
7 Line No. 4"-FL-0072-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ Flange ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL 2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Liquid
Hydrocarbon Li id
36 Phase Liquid
37 Operating Pressure 978 psig
38 Design Pressure 1300 psig
39 Operating Temperature AMB ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 80S 4 in Sch. 80S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 92 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8067B 1 (One)
2 Manufacturer Model Flowserve 4"TBF23FRBGZ CC0C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-131
6 Service From HP Fuel Gas to LP Fuel Gas Scrubber
7 Line No. 4"-FG-0035-3B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA122
10 Body Size Body Form 4 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 76μm 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid F l Gas
Fuel G
36 Phase Gas
37 Operating Pressure 302 psig
38 Design Pressure 350 psig
39 Operating Temperature 110 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 350 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 93 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8067C 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-131
6 Service LP Fuel Gas Scrubber to Closed Drain Header
7 Line No. 2"-DC-0012-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA032
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b
Hydrocarbon
36 Phase Liquid
37 Operating Pressure 102 psig
38 Design Pressure 152 psig
39 Operating Temperature 92 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 152 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 94 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6071A 1 (One)
2 Manufacturer Model Samjin TB-09F03RJ-5X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-150
6 Service SN0-V-6071 to Elec. Heater E-6079
7 Line No. 3"-HL-0207-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA471
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0100-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Liquid
37 Operating Pressure 1002 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80S 3 in Sch. 80S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 95 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6078A 1 (One)
2 Manufacturer Model Samjin TB-15F06RJ-6X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-150
6 Service Cluster #5 to Gas/Liquid Heat Exchanger (SNO-E-6078 A/B/C)
7 Line No. 6"-HF-0010-15R
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA453
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A182 F51 Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts UNS S31803 UNS S31803
16 Ball Material Stem Material ASTM A182 F51 UNS S31803
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 1.5S-1100-485-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-16
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset Yes
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid W ll Fluid
Well Fl id
36 Phase Gas / Liquid
37 Operating Pressure 1022 psig
38 Design Pressure 1300 psig
39 Operating Temperature 146 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 80S 6 in Sch. 80S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 96 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6071E 1 (One)
2 Manufacturer Model Samjin TB-15F02RJ-0X1X-SP
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-150
6 Service SNO-V-6071 to HP Flare Header
7 Line No. 2"-HG-0214-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Gas
37 Operating Pressure 1002 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature -20 / 140 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 97 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6075A 1 (One)
2 Manufacturer Model Samjin TB-15F02RJ-0X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-152
6 Service SN0-V-6075 to Gas Liquid Heat Exchager E-6078
7 Line No. 2"-HL-0206-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Liquid
37 Operating Pressure 630 psig
38 Design Pressure 725 psig
39 Operating Temperature 65 ºF
40 Design Temperature 130 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 725 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 98 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6073 1 (One)
2 Manufacturer Model Samjin TB-06F04RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-152
6 Service SNO-E-6073 to Export Gas
7 Line No. 4"-HG-0210-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-16
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas
37 Operating Pressure 630 psig
38 Design Pressure 725 psig
39 Operating Temperature 109 ºF
40 Design Temperature 130 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 725 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40S 4 in Sch. 40S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 99 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2102A 1 (One)
2 Manufacturer Model Samjin TB-09F12RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-301
6 Service Amine Contactor to Amine Flash Drum
7 Line No. 12"-CA-1500-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 900 psig
38 Design Pressure 1300 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 100 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2202A 1 (One)
2 Manufacturer Model Samjin TB-09F12RJ-3X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-311
6 Service Amine Contactor to Amine Flash Drum
7 Line No. 12"-CA-2500-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA472
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 900#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 900 psig
38 Design Pressure 1300 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 101 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2102B 1 (One)
2 Manufacturer Model Samjin TB-06F12RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-301
6 Service From Lean Amine Circulation Pump to Amine Contactor
7 Line No. 12"-CA-1527-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA045
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 960 psig
38 Design Pressure 1300 psig
39 Operating Temperature 130 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 102 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2202B 1 (One)
2 Manufacturer Model Samjin TB-06F12RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-311
6 Service From Lean Amine Circulation Pump to Amine Contactor
7 Line No. 12"-CA-2527-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA045
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0700-435-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 960 psig
38 Design Pressure 1300 psig
39 Operating Temperature 130 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 103 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2104D 1 (One)
2 Manufacturer Model Samjin TB-01F12RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-302
6 Service Amine Flash Drum to Lean / Rich Exchanger
7 Line No. 12"-CA-1505-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0250-280-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 105 psig
38 Design Pressure 155 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 10S 12 in Sch. 10S
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 104 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2204D 1 (One)
2 Manufacturer Model Samjin TB-01F12RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-312
6 Service Amine Flash Drum to Lean / Rich Exchanger
7 Line No. 12"-CA-2505-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0250-280-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 105 psig
38 Design Pressure 155 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 10S 12 in Sch. 10S
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 105 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2104C 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-302
6 Service Amine Flash Drum to Amine regen OVHD Condenser
7 Line No. 2"-GA-1500-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 105 psig
38 Design Pressure 155 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 106 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2204C 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-312
6 Service Amine Flash Drum to Amine regen OVHD Condenser
7 Line No. 2"-GA-2500-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 105 psig
38 Design Pressure 155 psig
39 Operating Temperature 163 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 107 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2106B 1 (One)
2 Manufacturer Model Samjin TB-03F12RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-304
6 Service From Hot Oil Distribution to Amine Reboiler SNO-E-2106B
7 Line No. 12"-OH-1139-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS CS+ENP 76μm
17 Leakage Rate Seat Material ISO 5208 Rate D NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 350 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 40 12 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 108 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2206B 1 (One)
2 Manufacturer Model Samjin TB-03F12RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-314
6 Service From Hot Oil Distribution to Amine Reboiler SNO-E-2206B
7 Line No. 12"-OH-2139-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS CS+ENP 76μm
17 Leakage Rate Seat Material ISO 5208 Rate D NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 350 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 40 12 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 109 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2106A 1 (One)
2 Manufacturer Model Samjin TB-03F12RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-304
6 Service From Hot Oil Distribution to Amine Reboiler SNO-E-2106A
7 Line No. 12"-OH-1137-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 350 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 40 12 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 110 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2206A 1 (One)
2 Manufacturer Model Samjin TB-03F12RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-314
6 Service From Hot Oil Distribution to Amine Reboiler SNO-E-2206A
7 Line No. 12"-OH-2137-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 12 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1100-485-CL 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 350 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 40 12 in Sch. 40
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 111 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2105A 1 (One)
2 Manufacturer Model Samjin TB-01F16RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-305
6 Service Amine Reflux Drum to Acid Gas Compresion
7 Line No. 16"-GA-1516-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 16 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0400-335-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Hf b
Hrfrocarbon
36 Phase Gas
37 Operating Pressure 17 psig
38 Design Pressure 100+F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 100 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 10 16 in Sch. 10
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 112 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2205A 1 (One)
2 Manufacturer Model Samjin TB-01F16RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-315
6 Service Amine Reflux Drum to Acid Gas Compresion
7 Line No. 16"-GA-2516-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 16 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0400-335-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Hf b
Hrfrocarbon
36 Phase Gas
37 Operating Pressure 17 psig
38 Design Pressure 100+F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 100 psig
42
43 Line Size and Sch. Inlet Outlet 16 in Sch. 10 16 in Sch. 10
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 113 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2105B 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-305
6 Service Amine Reflux Drum to Amine Reflux Pumps
7 Line No. 3"-CA-1518-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 75 psig
38 Design Pressure 175 psig
39 Operating Temperature 120 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 175 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 10S 3 in Sch. 10S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 114 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2205B 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-315
6 Service Amine Reflux Drum to Amine Reflux Pumps
7 Line No. 3"-CA-2508-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation AFLAS-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 75 psig
38 Design Pressure 175 psig
39 Operating Temperature 120 ºF
40 Design Temperature 250 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 175 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 10S 3 in Sch. 10S
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 115 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2123F 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-306
6 Service Sweet Gas KO Drum to Amine Flash Drum
7 Line No. 2"-CA-1521-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 116 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2223F 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-316
6 Service Sweet Gas KO Drum to Amine Flash Drum
7 Line No. 2"-CA-2521-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 117 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2123G 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-306
6 Service Sweet Gas KO Drum to TEG Contractor V-3102
7 Line No. 12"-HG-1505-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 118 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2223G 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-316
6 Service Sweet Gas KO Drum to TEG Contractor V-3202
7 Line No. 12"-HG-2505-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 119 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-2123D 1 (One)
2 Manufacturer Model Flowserve 6"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-306
6 Service Sweet Gas KO Drum to HP Flare Header
7 Line No. 6"-HG-1506-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 6 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG318SO4-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40S 6 in Sch. 40S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 120 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-2223D 1 (One)
2 Manufacturer Model Flowserve 6"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-316
6 Service Sweet Gas KO Drum to HP Flare Header
7 Line No. 6"-HG-2506-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 6 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG318SO4-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 889 psig
38 Design Pressure 1300 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40S 6 in Sch. 40S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 121 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3102A 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-401
6 Service SNO-V-3102 to Closed Drain
7 Line No. 2"-DC-1601-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Liquid
37 Operating Pressure 875 psig
38 Design Pressure 1300 psig
39 Operating Temperature 123 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 122 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3202A 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-411
6 Service SNO-V-3202 to Closed Drain
7 Line No. 2"-DC-2601-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Liquid
37 Operating Pressure 875 psig
38 Design Pressure 1300 psig
39 Operating Temperature 123 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 123 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3102F 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-401
6 Service SNO-V-3102 to TEG Regeration Train 1
7 Line No. 3"-G-1601-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h TEG
Rich
36 Phase Liquid
37 Operating Pressure 875 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 14 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3202F 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-411
6 Service SNO-V-3202 to TEG Regeration Train 2
7 Line No. 3"-G-2602-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h TEG
Rich
36 Phase Liquid
37 Operating Pressure 875 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 125 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3116A 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-402A
6 Service SNO-F-3116A to TEG Flash Vessel SNO-V-3110
7 Line No. 2"-G-1612-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid TEG
36 Phase Liquid
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 126 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3216A 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-412A
6 Service SNO-F-3216A to TEG Flash Vessel SNO-V-3210
7 Line No. 2"-G-2612-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid TEG
36 Phase Liquid
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 160 2 in Sch 160
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 127 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3116J 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-402A
6 Service SNO-F-3116A to Gas/Gas Exchanger SNO-E-5102
7 Line No. 12"-HG-1614-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 128 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3216J 1 (One)
2 Manufacturer Model Flowserve 12"TBF36FRBGZ CC7V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-412A
6 Service SNO-F-3216A to Gas/Gas Exchanger SNO-E-5202
7 Line No. 12"-HG-2614-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA015
10 Body Size Body Form 12 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 76μm A564 630, H1150M+ENP 76 μm
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor RG422SR6-SN0GE00 1.5
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility Yes
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas / Vapour
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 129 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-3116K 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-402A
6 Service SNO-F-3116A to Gas Exchanger SNO-E-5102
7 Line No. 3"-HG-1618-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Gas
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature -20 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch. 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 130 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-3216K 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-412A
6 Service SNO-F-3216A to Gas Exchanger SNO-E-5202
7 Line No. 3"-HG-2618-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) NYLON
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-235-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Fluid
Hydrocarbon Fl id
36 Phase Gas
37 Operating Pressure 872 psig
38 Design Pressure 1300 psig
39 Operating Temperature 124 ºF
40 Design Temperature -20 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch. 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 131 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3104A 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-403
6 Service From Hot Oil Distribution to SNO-E-3104
7 Line No. 6"-OH-1132-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 450 ºF
40 Design Temperature 500 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 132 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3204A 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-413
6 Service From Hot Oil Distribution to SNO-E-3204
7 Line No. 6"-OH-2132-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 450 ºF
40 Design Temperature 500 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 133 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3104B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-403
6 Service Fuel Gas Stripping to SNO-E-3104
7 Line No. 2"-FG-0012-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA032
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid F l Gas
Fuel G
36 Phase Gas
37 Operating Pressure 100 psig
38 Design Pressure 200 psig
39 Operating Temperature 124 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 200+F.V. psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 134 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3204B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-413
6 Service Fuel Gas Stripping to SNO-E-3204
7 Line No. 2"-FG-0041-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA032
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7M ASTM A194 2HM
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid F l Gas
Fuel G
36 Phase Gas
37 Operating Pressure 100 psig
38 Design Pressure 200 psig
39 Operating Temperature 124 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 200+F.V. psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 135 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3110A 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-404
6 Service SNO-V-3110 to SNO-F-3107
7 Line No. 3"-G-1610-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA003
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h TEG
Rich
36 Phase Liquid
37 Operating Pressure 80 psig
38 Design Pressure 130 psig
39 Operating Temperature 149 ºF
40 Design Temperature 175 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 130 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80 3 in Sch. 80
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 136 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-3210A 1 (One)
2 Manufacturer Model Samjin TB-01F03RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-414
6 Service SNO-V-3210 to SNO-F-3207
7 Line No. 3"-G-2610-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA003
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h TEG
Rich
36 Phase Liquid
37 Operating Pressure 80 psig
38 Design Pressure 130 psig
39 Operating Temperature 149 ºF
40 Design Temperature 175 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 130 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 80 3 in Sch. 80
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 137 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6051A 1 (One)
2 Manufacturer Model Samjin TB-01F06RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-602
6 Service From SNO-C-6051 to Lean/rich Exchanger E-6057
7 Line No. 6"-CA-6500-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 115 psig
38 Design Pressure 165 psig
39 Operating Temperature 148 ºF
40 Design Temperature 170 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 165 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 10S 6 in Sch 10S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 138 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6051B 1 (One)
2 Manufacturer Model Flowserve 4"TBF23FRBGZ CC0C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-602
6 Service From Lean Amine Cooler E-6056 to SNO-C-6051
7 Line No. 4"-CA-6503-3B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA122
10 Body Size Body Form 4 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP 76μm 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor RG107SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Ri h Amine
Rich A i
36 Phase Liquid
37 Operating Pressure 190 psig
38 Design Pressure 305 psig
39 Operating Temperature 130 ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 305 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 139 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6060A 1 (One)
2 Manufacturer Model Samjin TB-03F06RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-604
6 Service From Hot Oil Distribution to SNO-E-6060
7 Line No. 6"-OH-1007-3A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA010
10 Body Size Body Form 6 in Ball
11 Body Material Port Size ASTM A216-WCB Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H t Oil
Hot
36 Phase Liquid
37 Operating Pressure 65 psig
38 Design Pressure 210 psig
39 Operating Temperature 350 ºF
40 Design Temperature 450 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 140 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6054A 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-605
6 Service From Amine Reflux to Acid Gas Conversion Unit
7 Line No. 4"-GA-6516-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A id Gas
Acid G
36 Phase Gas
37 Operating Pressure 19 psig
38 Design Pressure 70+F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 70 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 10S 4 in Sch. 10S
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 141 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6054B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-605
6 Service SNO-P-6061A/B to Amine Regenerator
7 Line No. 2"-CA-6508-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 74 psig
38 Design Pressure 150 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 150 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 142 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6053F 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-606
6 Service SNO-V-6053 to Rich/Lean Amine Exchanger SNO-E-6057
7 Line No. 2"-CA-6521-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A i
Amine
36 Phase Liquid
37 Operating Pressure 104 psig
38 Design Pressure 165 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 165 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 143 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6053G 1 (One)
2 Manufacturer Model Flowserve 6"TBF21FRBGZ C60C
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-606
6 Service SNO-V-6053 to LP Fuel Gas Scrubber
7 Line No. 6"-HG-6603-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA034
10 Body Size Body Form 6 in Ball
11 Body Material Port Size A105 Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 316 SS
17 Leakage Rate Seat Material ISO 5208 Rate A RPTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas
37 Operating Pressure 104 psig
38 Design Pressure 165 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 165 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 40 6 in Sch. 40
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 144 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity BDV-6053D 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-606
6 Service SNO-V-6053 to LP Flare Header
7 Line No. 2"-HG-6506-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA003
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-2
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas
37 Operating Pressure 104 psig
38 Design Pressure 165 psig
39 Operating Temperature 120 ºF
40 Design Temperature 42 / 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 165 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 145 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6070A 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-010B
6 Service From SAHC Unit to Sulphuric Acid Storage Tank
7 Line No. 4"-SA-0158-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA032
10 Body Size Body Form 4 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7M A194 2HM
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Li id
Liquid
36 Phase Sulphuric Acid
37 Operating Pressure 104 psig
38 Design Pressure 155 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 146 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6070B 1 (One)
2 Manufacturer Model Samjin TB-01F04RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-010B
6 Service From SAHC Unit to Sulphuric Acid Storage Tank
7 Line No. 4"-SA-0001-1B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA032
10 Body Size Body Form 4 in Ball
11 Body Material Port Size A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7M A194 2HM
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Li id
Liquid
36 Phase Sulphuric Acid
37 Operating Pressure 104 psig
38 Design Pressure 155 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 155 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 40 4 in Sch. 40
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 147 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6020F 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034B
6 Service Emergency Condensate Storage Tank Inlet
7 Line No. 8"-HL-0065-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid St bili d Condensate
Stabilized C d t
36 Phase Oil
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature AMB ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 148 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6020H 1 (One)
2 Manufacturer Model Samjin TB-01F08RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034B
6 Service Emergency Condensate Storage Tank Inlet
7 Line No. 8"-HL-0066-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 8 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 0.3C-0150-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid St bili d Condensate
Stabilized C d t
36 Phase Oil
37 Operating Pressure 149 psig
38 Design Pressure 225 psig
39 Operating Temperature AMB ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 225 psig
42
43 Line Size and Sch. Inlet Outlet 8 in Sch. 20 8 in Sch. 20
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 149 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6020G 1 (One)
2 Manufacturer Model Samjin TB-01F24RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034B
6 Service Emergency Condensate Storage Tank Outlet
7 Line No. 24"-HL-0067-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 24 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flanged ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return VTA
20 Model No. Safety Factor ALGAS 3C-2000-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid St bili d Condensate
Stabilized C d t
36 Phase Oil
37 Operating Pressure ATM psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 24 in Sch. 20 24 in Sch. 20
44 Speed of Operation Design VTASeconds
45 (Seconds) Actual VTA
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 150 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity XV-6020I 1 (One)
2 Manufacturer Model Samjin TB-01F24RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-034B
6 Service Emergency Condensate Storage Tank Outlet
7 Line No. 24"-HL-0069-1A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA005
10 Body Size Body Form 24 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flanged ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7 A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return VTA
20 Model No. Safety Factor ALGAS 3C-2000-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-10
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid St bili d Condensate
Stabilized C d t
36 Phase Oil
37 Operating Pressure ATM psig
38 Design Pressure 50 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 50 psig
42
43 Line Size and Sch. Inlet Outlet 24 in Sch. 20 24 in Sch. 20
44 Speed of Operation Design VTASeconds
45 (Seconds) Actual VTA
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 151 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8032A 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-126
6 Service Export Gas
7 Line No. 3"-HG-0400-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA044
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flanged ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7M A194 2HM
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A . NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch. 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 152 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-8032B 1 (One)
2 Manufacturer Model Samjin TB-06F03RF-4X1X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-126
6 Service Export Gas
7 Line No. 3"-HG-0031-6B
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA044
10 Body Size Body Form 3 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flanged ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts A193 B7M A194 2HM
16 Ball Material Stem Material CS+ENP 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A . NYLON
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 6 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-OP 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Open Open
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b Gas
Hydrocarbon G
36 Phase Gas
37 Operating Pressure 852 psig
38 Design Pressure 1300 psig
39 Operating Temperature 100 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 3 in Sch. 160 3 in Sch. 160
44 Speed of Operation Design 6 Seconds
45 (Seconds) Actual 6 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 153 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4032A 1 (One)
2 Manufacturer Model Samjin TB-01F24RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-701
6 Service Acid gas from acid gas removal unit
7 Line No. 24"-GA-0004-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA100
10 Body Size Body Form 24 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 24 Seconds
20 Model No. Safety Factor ALGAS 3C-2000-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid A id Gas
Acid G
36 Phase Gas
37 Operating Pressure 17 psig
38 Design Pressure 100+F.V. psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 100 psig
42
43 Line Size and Sch. Inlet Outlet 24 in Sch. 10 24 in Sch. 10
44 Speed of Operation Design 24 Seconds
45 (Seconds) Actual 24 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 154 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4032 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-701
6 Service Sour water drain to closed drain header
7 Line No. 2"-SW-0401-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA098
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type 1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid S
Sour t
water
36 Phase Liquid
37 Operating Pressure 17 psig
38 Design Pressure 100 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 100 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 10S 2 in Sch. 10S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 155 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4033 1 (One)
2 Manufacturer Model Samjin TB-03F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-701
6 Service Hydrocarbon drain to closed drain header
7 Line No. 2"-DC-0402-3N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA146
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RF Flange ASME 300#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A (TSO) RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006B-100-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid H d b
Hydrocarbon
36 Phase Liquid
37 Operating Pressure 115 psig
38 Design Pressure 210 psig
39 Operating Temperature 107 ºF
40 Design Temperature 220 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 210 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 156 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4015B 1 (One)
2 Manufacturer Model Samjin TB-01F02RF-4X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-706
6 Service Utility air to WSA Condenser
7 Line No. 2"-UA-0026-1G
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA313
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flanged ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material CS+ENP CS+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.1C-006A-085-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid Utilit Air
Utility Ai
36 Phase Gas
37 Operating Pressure 130 psig
38 Design Pressure 200 psig
39 Operating Temperature AMB ºF
40 Design Temperature 200 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 200 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80 2 in Sch. 80
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 157 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4035 1 (One)
2 Manufacturer Model Samjin TB-06F04RF-4X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-714
6 Service BFW to BFW preheater
7 Line No. 4"-BF-0404-6A
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA013
10 Body Size Body Form 4 in Ball
11 Body Material Port Size ASTM A216 WCB Full Bore
12 Connection Rating RF Flange ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B7 ASTM A194 2H
16 Ball Material Stem Material 316 SS+TCC 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 8 Seconds
20 Model No. Safety Factor ALGAS 0.9C-0200-235-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid B il Feed
Boiler F d Water
W t
36 Phase Liquid
37 Operating Pressure 618.8 psig
38 Design Pressure 750 psig
39 Operating Temperature 225 ºF
40 Design Temperature 480 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 750 psig
42
43 Line Size and Sch. Inlet Outlet 4 in Sch. 120 4 in Sch. 120
44 Speed of Operation Design 8 Seconds
45 (Seconds) Actual 8 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 158 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4013A 1 (One)
2 Manufacturer Model Samjin TB-06F12RF-0X0X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Processing Plant
GENERAL
5 P&ID No. SNO-R-PI-704
6 Service Steam to STG
7 Line No. 12"-HS-0408-6K1
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball -
10 Body Size Body Form 12" in Ball
11 Body Material Port Size A217 WC6 Full Bore
12 Connection Rating RF Flanged ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193-B16 ASTM A194-4
16 Ball Material Stem Material 316 SS+TCC UNS S66286
17 Leakage Rate Seat Material ISO 5208 Rate D 316 SS+TC
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 15 Seconds
20 Model No. Safety Factor ALGAS 1.5C-1200-535-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid St
Steam
36 Phase Gas
37 Operating Pressure 415.1 psig
38 Design Pressure 520 psig
39 Operating Temperature 842 ºF
40 Design Temperature 1085 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 520+F.V. psig
42
43 Line Size and Sch. Inlet Outlet 12 in Sch. 100 12 in Sch. 100
44 Speed of Operation Design 15 Seconds
45 (Seconds) Actual 15 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 159 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-7006A 1 (One)
2 Manufacturer Model Samjin TB-01F06RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Process Plant
GENERAL
5 P&ID No. SNO-R-PI-031
6 Service Produced water from degassing column to produced water tank
7 Line No. 6"-WW-0002-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Type BA100
10 Body Size Body Form 6" Ball
11 Body Material Port Size A351 CF8M Full Bore
12 Connection Rating RF Flanged ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316 SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 12 Seconds
20 Model No. Safety Factor ALGAS 0.3S-0100-175-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid P d d water
Produced t
36 Phase Liquid
37 Operating Pressure 10 psig
38 Design Pressure 60 psig
39 Operating Temperature 120 ºF
40 Design Temperature 150 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 60 psig
42
43 Line Size and Sch. Inlet Outlet 6 in Sch. 10S 6 in Sch. 10S
44 Speed of Operation Design 12 Seconds
45 (Seconds) Actual 12 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 160 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-4018A 1 (One)
2 Manufacturer Model Flowserve 1"BF21FRBGZ L67T
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Process Plant
GENERAL
5 P&ID No. SNO-R-PI-710
6 Service Sulphuric Acid 95.5 wt%
7 Line No. 1"-SA-0809-1N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Type BA096
10 Body Size Body Form 1" Ball
11 Body Material Port Size A182 F316L Full Bore
12 Connection Rating RF Flanged ASME 150#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A PTFE
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 2 Seconds
20 Model No. Safety Factor CBB315 SR60 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid S l h i Acid
Sulphuric A id 95.5
95 5 wt%
t%
36 Phase Liquid
37 Operating Pressure 50.8 psig
38 Design Pressure 116 psig
39 Operating Temperature 104 ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 116 psig
42
43 Line Size and Sch. Inlet Outlet 1 in Sch. 40S 1 in Sch. 40S
44 Speed of Operation Design 2 Seconds
45 (Seconds) Actual 2 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 161 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2102C 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Process Plant
GENERAL
5 P&ID No. SNO-R-PI-301
6 Service Demin Water
7 Line No. 2"-DW-1054-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid D i Water
Demin W t
36 Phase Liquid
37 Operating Pressure 900 psig
38 Design Pressure 1300 psig
39 Operating Temperature AMB ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 162 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-2202C 1 (One)
2 Manufacturer Model Flowserve 2"TBF35FQBGZ L67V
3 Contract No. Requisition Item No. 4500126104 SNO-I-RQ-005
4 Location Central Process Plant
GENERAL
5 P&ID No. SNO-R-PI-311
6 Service Demin Water
7 Line No. 2"-DW-2054-9N
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA466
10 Body Size Body Form 2 in Ball
11 Body Material Port Size A182 F316L Full Bore
12 Connection Rating RTJ ASME 1500#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation Grafoil Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 316SS
17 Leakage Rate Seat Material ISO 5208 Rate A Devlon
18 NACE Requirement Yes
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor RG108SR1-SN0GE00 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid D i Water
Demin W t
36 Phase Liquid
37 Operating Pressure 900 psig
38 Design Pressure 1300 psig
39 Operating Temperature AMB ºF
40 Design Temperature 185 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1300 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 80S 2 in Sch. 80S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 163 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity SDV-6051C 1 (One)
2 Manufacturer Model Samjin TB-06F02RF-5X3X-SP
3 Contract No. Requisition Item No. 4500126138 SNO-I-RQ-005
4 Location Central Process Plant
GENERAL
5 P&ID No. SNO-R-PI-602
6 Service Demin Water
7 Line No. 2"-DW-0052-6M
8 Area Classification Zone-2, Gr. IIB, T3
9 Valve Type Valve Code Trunnion Mounted Ball BA156
10 Body Size Body Form 2 in Ball
11 Body Material Port Size ASTM A351 CF8M Full Bore
12 Connection Rating RTJ ASME 600#
13 Fire Safe Design Anti Static API 6FA Yes, as per API 6D
VALVE BODY
14 Packing Lubrication & Isolation VITON-GRP Double Isolation
15 Bonnet Bolts Bonnet Nuts ASTM A193 B8M CL2 ASTM A194 8M
16 Ball Material Stem Material 316SS 17-4PH+ENP
17 Leakage Rate Seat Material ISO 5208 Rate A RTFE
18 NACE Requirement No
19 Type Stroking Time Pneumatic Piston / Spring return 4 Seconds
20 Model No. Safety Factor ALGAS 0.3S-008A-135-CL 1.3
21 Actuator Orientation Actuator Form Horizontal Cylinder
22 Ingress Protection Electrical Protection IP65 Eex i
23 Instrument Air Supply 80-120 Psig
24 Action on Air Failure Action on Power Failure Closed Closed
ACTUATOR 25 Fireproofing No
26 Solenoid Valve Schematic Detail Yes Type-1
27 Limit Switch Closed Limit Swich Open Yes Yes
28 Mounting Position Solenoid Power Supply Top 24VDC
29 Manual Reset No
30 Mechanical Position Indicator Red Closed / Green Open
31 Partial Stroke Facility No
31 Signal Cable 1/2" NPT
ELECTRICAL 32 Control Cable -
CONNECTIONS 33 Solenoid Cable 3/4" NPT
34
35 Fl id
Fluid D i Water
Demin W t
36 Phase Liquid
37 Operating Pressure 115 psig
38 Design Pressure 1100 psig
39 Operating Temperature AMB ºF
40 Design Temperature 170 ºF
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size 1100 psig
42
43 Line Size and Sch. Inlet Outlet 2 in Sch. 40S 2 in Sch. 40S
44 Speed of Operation Design 4 Seconds
45 (Seconds) Actual 4 Seconds
46
Notes
1. Actuated ball valve and actuator shall be provided with 316 SS nameplate engraved or die stamped with Valve Tag No., Manufacturer's Name,
Model No., Valve Size & Rating.
2. Vendor shall be responsible for the proper design and selection of valve, actuator, and accessories based on the information furnished
in this specification. This Data Sheet shall refer to SNO-I-ES-013, Instrument Specification for Shutdown and Blowdown Valve
3. Actuator shall be sized based on valve manufacturer's required Torque values with 130% minimum safety margin to open or close the valve
against full ANSI rated differential pressure at minimum pneumatic supply pressure of 60 psig.
4. Vendor shall provide Torque table containing breaking, running and seating torques for valves and actuator along with Quotation.
Vendor shall provide the torque table and calculation for COMPANY approval.
5. Actuator and accessories shall be supplied fully assembled, tubed and tested ready for installation.
6. Solenoid valve coil shall be provided with reverse polarity protection diodes, integral outlet box and terminal strip for cable connection.
7. Three way valve shall be universal type. Solenoid Coil shall be Class H.
Air filter regulator shall be 316 SS Material and equipped with pressure gauge on inlet and outlet of air filter regulator.
8. All SDV & BDV shall be designed & tested as per API 6D
9. Valve Stem Shall be Anti-Blowout Type.
10. SDV / BDV (Valve, Solenoid Valve, Actuator) shall be SIL 2 certificate as a minimum
11. Vendor shall refer to SNO-G-ES-008, Standard Specification for Surface preparation, Painting, Galvanizing

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 164 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity
2 Manufacturer Model
3 Contract No. Requisition Item No.
4 Location
GENERAL
5 P&ID No.
6 Service
7 Line No.
8 Area Classification
9 Valve Type Valve Code
10 Body Size Body Form
11 Body Material Port Size
12 Connection Rating
13 Fire Safe Design Anti Static
VALVE BODY
14 Packing Lubrication & Isolation
15 Bonnet Bolts Bonnet Nuts
16 Ball Material Stem Material
17 Leakage Rate Seat Material
18 NACE Requirement
19 Type Stroking Time
20 Model No. Safety Factor
21 Actuator Orientation Actuator Form
22 Ingress Protection Electrical Protection
23 Instrument Air Supply
24 Action on Air Failure Action on Power Failure
ACTUATOR 25 Fireproofing
26 Solenoid Valve Schematic Detail
27 Limit Switch Closed Limit Swich Open
28 Mounting Position Solenoid Power Supply
29 Manual Reset
30 Mechanical Position Indicator
31 Partial Stroke Facility
31 Signal Cable
ELECTRICAL 32 Control Cable
CONNECTIONS 33 Solenoid Cable
34
35 Fl id
Fluid
36 Phase
37 Operating Pressure
38 Design Pressure
39 Operating Temperature
40 Design Temperature
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size
42
43 Line Size and Sch. Inlet Outlet
44 Speed of Operation Design
45 (Seconds) Actual
46
Notes
1. SDV-3102B / 3202B are deleted as per P&ID AFC

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 165 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity
2 Manufacturer Model
3 Contract No. Requisition Item No.
4 Location
GENERAL
5 P&ID No.
6 Service
7 Line No.
8 Area Classification
9 Valve Type Valve Code
10 Body Size Body Form
11 Body Material Port Size
12 Connection Rating
13 Fire Safe Design Anti Static
VALVE BODY
14 Packing Lubrication & Isolation
15 Bonnet Bolts Bonnet Nuts
16 Ball Material Stem Material
17 Leakage Rate Seat Material
18 NACE Requirement
19 Type Stroking Time
20 Model No. Safety Factor
21 Actuator Orientation Actuator Form
22 Ingress Protection Electrical Protection
23 Instrument Air Supply
24 Action on Air Failure Action on Power Failure
ACTUATOR 25 Fireproofing
26 Solenoid Valve Schematic Detail
27 Limit Switch Closed Limit Swich Open
28 Mounting Position Solenoid Power Supply
29 Manual Reset
30 Mechanical Position Indicator
31 Partial Stroke Facility
31 Signal Cable
ELECTRICAL 32 Control Cable
CONNECTIONS 33 Solenoid Cable
34
35 Fluid
Fl id
36 Phase
37 Operating Pressure
38 Design Pressure
39 Operating Temperature
40 Design Temperature
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size
42
43 Line Size and Sch. Inlet Outlet
44 Speed of Operation Design
45 (Seconds) Actual
46
Notes
1. XV-6030E is supplied by Jetty Loading Arm Supplier

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 166 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity
2 Manufacturer Model
3 Contract No. Requisition Item No.
4 Location
GENERAL
5 P&ID No.
6 Service
7 Line No.
8 Area Classification
9 Valve Type Valve Code
10 Body Size Body Form
11 Body Material Port Size
12 Connection Rating
13 Fire Safe Design Anti Static
VALVE BODY
14 Packing Lubrication & Isolation
15 Bonnet Bolts Bonnet Nuts
16 Ball Material Stem Material
17 Leakage Rate Seat Material
18 NACE Requirement
19 Type Stroking Time
20 Model No. Safety Factor
21 Actuator Orientation Actuator Form
22 Ingress Protection Electrical Protection
23 Instrument Air Supply
24 Action on Air Failure Action on Power Failure
ACTUATOR 25 Fireproofing
26 Solenoid Valve Schematic Detail
27 Limit Switch Closed Limit Swich Open
28 Mounting Position Solenoid Power Supply
29 Manual Reset
30 Mechanical Position Indicator
31 Partial Stroke Facility
31 Signal Cable
ELECTRICAL 32 Control Cable
CONNECTIONS 33 Solenoid Cable
34
35 Fluid
Fl id
36 Phase
37 Operating Pressure
38 Design Pressure
39 Operating Temperature
40 Design Temperature
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size
42
43 Line Size and Sch. Inlet Outlet
44 Speed of Operation Design
45 (Seconds) Actual
46
Notes
1. SDV-4101 is deleted because of deletion of SNO-R-PI-010

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 167 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity
2 Manufacturer Model
3 Contract No. Requisition Item No.
4 Location
GENERAL
5 P&ID No.
6 Service
7 Line No.
8 Area Classification
9 Valve Type Valve Code
10 Body Size Body Form
11 Body Material Port Size
12 Connection Rating
13 Fire Safe Design Anti Static
VALVE BODY
14 Packing Lubrication & Isolation
15 Bonnet Bolts Bonnet Nuts
16 Ball Material Stem Material
17 Leakage Rate Seat Material
18 NACE Requirement
19 Type Stroking Time
20 Model No. Safety Factor
21 Actuator Orientation Actuator Form
22 Ingress Protection Electrical Protection
23 Instrument Air Supply
24 Action on Air Failure Action on Power Failure
ACTUATOR 25 Fireproofing
26 Solenoid Valve Schematic Detail
27 Limit Switch Closed Limit Swich Open
28 Mounting Position Solenoid Power Supply
29 Manual Reset
30 Mechanical Position Indicator
31 Partial Stroke Facility
31 Signal Cable
ELECTRICAL 32 Control Cable
CONNECTIONS 33 Solenoid Cable
34
35 Fluid
Fl id
36 Phase
37 Operating Pressure
38 Design Pressure
39 Operating Temperature
40 Design Temperature
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size
42
43 Line Size and Sch. Inlet Outlet
44 Speed of Operation Design
45 (Seconds) Actual
46
Notes
1. SDV-4101B is deleted because of deletion of SNO-R-PI-010

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 168 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0
 1 Tag No. Quantity
2 Manufacturer Model
3 Contract No. Requisition Item No.
4 Location
GENERAL
5 P&ID No.
6 Service
7 Line No.
8 Area Classification
9 Valve Type Valve Code
10 Body Size Body Form
11 Body Material Port Size
12 Connection Rating
13 Fire Safe Design Anti Static
VALVE BODY
14 Packing Lubrication & Isolation
15 Bonnet Bolts Bonnet Nuts
16 Ball Material Stem Material
17 Leakage Rate Seat Material
18 NACE Requirement
19 Type Stroking Time
20 Model No. Safety Factor
21 Actuator Orientation Actuator Form
22 Ingress Protection Electrical Protection
23 Instrument Air Supply
24 Action on Air Failure Action on Power Failure
ACTUATOR 25 Fireproofing
26 Solenoid Valve Schematic Detail
27 Limit Switch Closed Limit Swich Open
28 Mounting Position Solenoid Power Supply
29 Manual Reset
30 Mechanical Position Indicator
31 Partial Stroke Facility
31 Signal Cable
ELECTRICAL 32 Control Cable
CONNECTIONS 33 Solenoid Cable
34
35 Fluid
Fl id
36 Phase
37 Operating Pressure
38 Design Pressure
39 Operating Temperature
40 Design Temperature
PROCESS DATA
41 Max. Diff. Pressure for Actuator Size
42
43 Line Size and Sch. Inlet Outlet
44 Speed of Operation Design
45 (Seconds) Actual
46
Notes
1. XV-6073E is supplied by Loading Arm Package Supplier

INSTRUMENT DATA SHEET

FOR
SHUTDOWN AND BLOWDOWN
VALVES
0 07-Feb-14 SYL Approved for Construction Sheet 169 of 169
REV DATE BY DESCRIPTION Doc. No. : SNO-I-DS-001 Rev. : 0