VENDOR SUPPLIED - GE NOT TO REVISE.

THIS DOCUMENT IS FILED UNDER THE GE DRAWING NUMBER AND GE REVISION LEVEL
DWG Number E1738-1609-ATT.20 Rev - Released 10/30/2019 Page 1 of 3

M 350 The MS sealant

OTTOSEAL®
M 350
Technical Datasheet

Characteristics: - 1-component sealant based on MS hybrid polymer

- Compatible with coatings according to DIN 52452
- Can be painted and varnished – please observe application instruction in TDS
- Good weathering and ageing resistance
- Non-corrosive
- Silicone-free

Fields of application: - Window pane sealing on wooden windows

- Sealing of joints on windows and doors made of wood, metal and plastic
- Sealing of pipe and antenna ducts
- Sealing double-glazings (e. g. "Profilit")
- Sealing of joints on façades, metal constructions
- Sealing of air condition and ventilation systems
- Suitable for glazing systems with putty fronting Va1 in accordance with DIN 18545 / ÖNORM 3724

Standards and tests: - Tested according to EN 15651 – Part 1: F EXT-INT CC 25

- Tested according to EN 15651 – Part 2: G CC 25 HM
- According to the requirements of DIN 18545, stress group A and D
- According to the requirements of ISO 11600 G 25 HM
- Suitable for use in room ventilation systems according to VDI 6022 (Ass. Of Germ. Engineers), sheet
1 tested according to DIN EN ISO 846 (by the Institute for Hygiene Berlin, Germany)
- Suitable for applications according to IVD instruction sheet no. 9+12+20+24+27+29+31+32+35 (IVD
= German industry association sealants)
- French VOC-emission class A+
- Declaration in "baubook" Austria

Important information: Before applying this product the user has to ensure that the materials in the area of contact (solid, liquid
and gaseous) are compatible with it and also amongst each other and do not damage or alter (e. g.
discolour) each other. As for the materials that will be used at a later stage in the surrounding area of the
product the user has to clarify beforehand that the substances of content or evaporations do not lead to
an impairment or alteration (e. g. discolouration) of the product. In case of doubt the user should consult
the respective manufacturer of the material.
Not suitable for sealing / bonding copper upon impact of UV-radiation and temperature.
Application of solvent-based alkyd resins can result in an increased curing time.
Good resistance to water, fat, lubricant oils as well as to diluted anorganic acids and alkaline solutions.
Temporary resistance to ester, ketone, aromatics and aliphatic solvents is given.
Not resistant to concentrated acids and alkaline solutions nor to halogenated hydrocarbons.
The colours of the sealant may be affected by environmental influences (high temperature, chemicals,
vapours, UV-radiation). This does not affect the characteristics of the product.

Technical properties: Skin-forming time at 23 °C/50 % RH [minutes] ~ 20 - 30

Curing in 24 hours at 23 °C/50 % RH [mm] ~ 2,5
Processing temperature from/to [°C] + 5 / + 40

Technical Datasheet OTTOSEAL® M 350

Page 1
version: 38 / 31gb (13.09.2017, 10:50 h)

Hermann Otto GmbH · Krankenhausstr. 14 · 83413 Fridolfing, GERMANY

Tel.:+49 8684-908-0 · Fax: +49 8684-1260
e-mail: [email protected] · Internet: www.otto-chemie.com GE Proprietary Information - Class II (Internal) US EAR - NLR
DWG Number E1738-1609-ATT.20 Rev - Released 10/30/2019 Page 2 of 3

Viscosity at 23 °C pasty, stable

Density at 23 °C according to ISO 1183-1 [g/cm³] ~ 1,4
Shore-A-hardness according to ISO 868 ~ 21
Permissible movement capability [%] 25
Stress expansion modulus at 100 % according to ISO 37, S3A [N/mm²] ~ 0,35
Tensile expansion according to ISO 37, S3A [%] ~ 300
Tensile strength according to ISO 37, S3A [N/mm²] ~ 1,4
Temperature resistance from/to [°C] - 40 / +90
Shelf life at 23 °C/50 % RH for cartridge/foil bag [months] 12

These data are not suitable for the issue of specifications. Please contact OTTO-CHEMIE before issuing
specifications.

Pretreatment: All adherent surfaces must be clean and any contaminant such as release agents, preserving agents,
grease, oil, dust, water, old adhesives or sealants and other substances which could affect adhesion,
should be removed. Cleaning of non-porous substrates: Apply OTTO Cleaner T (airing time approx. 1
minute) using a clean, lint-free cotton cloth. Cleaning porous substrates: Clean surfaces with steel-wire
brush e. g. or a grinding disk to remove loose particles.

Primer Table: The demands on elastic sealings and bondings depend on the respective exterior influences. Extreme
fluctuations in temperature, tensile or shear forces, repeated contact with water etc. demand high
requirements of a bonding. In such cases it is advisable to apply primer according to the
recommendations of our technical department (e. g. +/OTTO Primer 1216) in order to achieve a resilient
bonding.

Acrylic glass/PMMA (Plexiglas®, etc.) + / 1217

Acrylic bathroom surfaces (e. g. bath tubs) -
Aluminium +
Aluminium anodized +
Aluminium powder-coated T
Concrete 1218
Concrete block -
Lead T
Chrome T
Stainless steel +
Iron T
Epoxid resin coating T
Fibre cement 1215
Glass +
Wood, painted (solvent systems) +
Wood, painted (aquaeous systems) T
Wood, varnished (solvent systems) +
Wood, varnished (aquaeous systems) +
Wood, untreated +
Ceramic, glazed +
Ceramics, unglazed + / 1215 / 1216
Artificial stone -
Plastic profiles (unplasticized, e. g. Vinnolit) + / 1217 / 1227
Copper + (1)
Melamine formaldehyde resins (e. g. Resopal®) +
Brass +
Natural stone / marble -
Polyester T
Polypropylene -
Cellular concrete T
Plaster 1218
PVC unplasticized + / 1217 / 1227
PVC-soft-foils -
Tinplate T
Zinc, galvanised iron +

Technical Datasheet OTTOSEAL® M 350

Page 2
version: 38 / 31gb (13.09.2017, 10:50 h)

Hermann Otto GmbH · Krankenhausstr. 14 · 83413 Fridolfing, GERMANY

Tel.:+49 8684-908-0 · Fax: +49 8684-1260
e-mail: [email protected] · Internet: www.otto-chemie.com GE Proprietary Information - Class II (Internal) US EAR - NLR
DWG Number E1738-1609-ATT.20 Rev - Released 10/30/2019 Page 3 of 3

1) Not suitable for the sealing of covering plates made of copper.

+ = good adherence without primer

- = not suitable
T = Test/pilot test advised

Application information: Our product can be overcoated with paint or varnish. The compatibility between the coating and our
product has to be checked before the application by the user/processor - possibly under production
conditions. Our OTTO application technology will gladly support you non-committally. If, in exceptional
cases, after succesful compatibility test our product is coated over the entire surface, this coating must
also be able to follow the elastic movement of the sealant. Otherwise crack formations in the coat of
paint or optical impairments may occur.
Due to the many possible influences during and after application, the customer always has to carry out
trials first.
Please observe the recommended shelf life which is printed on the packaging.
We recommend to store our products in unopened original packagings dry (< 60 % RH) at
temperatures of +15 °C up to +25 °C. If the products are stored and / or transported at higher
temperatures / air humidity for longer periods (some weeks), a diminuition of durability or a change of
material characteristics may arise.

Packaging: 300 ml cartridge

concrete grey M350-03-C56
white M350-03-C01
Packaging unit 12
Pieces per pallet 1152
No special colours possible.
Other units on request

Safety precautions: Please observe the material safety data sheet.

After curing the product is completely odourless.

Disposal: Information about disposal: Please refer to the material safety data sheet.

Warranty information: All information in this publication is based on our current technical knowledge and experience. However,
since conditions and methods of use and application of our products are beyond our control, we suggest
that you test the product before final use. Information given in this technical data sheet and explanations
of OTTO-CHEMIE in connection with this technical data sheet (e.g. service description, reference to DIN
regulations etc.) is not to be seen as a warranty. Warranties require a separate written declaration of
OTTO-CHEMIE to prove their validity. The characteristics stated in this data sheet define the
characteristics of the article broadly and concludingly. Suggestions of use are not to be taken as
confirmation of the appropriateness for the recommended intended use. We reserve the right to alter the
product, adjusting it according to technical progress and new developments. We are at your disposal
both for inquiries as well as specific application problems. If a governmental approval or clearance is
necessary for the application of our products, the user is responsible for the obtainment of such. Our
recommendations do not excuse the user from the obligation to take into consideration the possibility of
infringement of third parties' rights and - if necessary - resolving it. For the rest our general terms and
conditions apply, in particular regarding a possible liability for defects. You can find our general terms
and conditions on our homepage: http://www.otto-chemie.de/en/terms-and-conditions

Technical Datasheet OTTOSEAL® M 350

Page 3
version: 38 / 31gb (13.09.2017, 10:50 h)

Hermann Otto GmbH · Krankenhausstr. 14 · 83413 Fridolfing, GERMANY

Tel.:+49 8684-908-0 · Fax: +49 8684-1260
e-mail: [email protected] · Internet: www.otto-chemie.com GE Proprietary Information - Class II (Internal) US EAR - NLR