Record of Welder Performance Qualification: Picture

BS TECH ENG. CONSTRUCTION
CORPORATION

Aquino Avenue Poblacion , San Pascual
Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Email Add.: [email protected]
RECORD OF WELDER PERFORMANCE QUALIFICATION
Welder Name Rey Marquinez Welders No.: BST-W-019

Welding Process (es) used: SMAW Type Manual
Identification of WPS followed by welder during welding of test coupon BST-WP-SMAW-001 Thickness 16 mm
Base Material (s) welded A36
Filler Metal Specification ( SFA ) Class (QW-404) SFA 5.1
VARIABLES Actual Values Range Qualified

Backing ( QW-402 ) With With
P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

ASME P- No. ( QW-403 ) P-No.1 to P-No. 1 unassigned metals of similar chemical
composition to these metals
Groove : All Plate

Plate Pipe ( enter diameter, if pipe ) ( QW-403 ) Plate Pipe NPS 2- 1/2" and over
Fillet: All Plate & Pipe
Filler Metal F-No. ( QW-404 ) F-No.4 F-No.1 to F-No.4
Filler Metal Product Form
( solid/ cored/ flux-cored - GTAW/PAW (QW-404 ) N/A N/A
Consumable Insert for GTAW or PAW ( QW-404 ) N/A N/A
Weld Deposit Thickness for each Welding Process ( QW-404 ) 16 mm ( ≥ 3 layers ) Max.to be Welded
Groove: Plate and Pipe over
: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
Welding Position (1G, 5G, etc. ) ( QW-405 ) 4G
:F
Fillet: Plate and Pipe
: F, H, O
Progression ( uphill/ downhill ) Uphill Uphill
Backing Gas for GTAW, PAW, or GMAW ( QW-408 ) N/A N/A
GMAW Transfer Mode ( QW-409 ) N/A N/A
SMAW Welding Current Type/Polarity ( QW-409 ) DC AC/DC
Polarity Reverse Reverse
GUIDED BEND TEST RESULTS ----N/A

Guide Bend Test Type QW-462.2 ( Side ) Results QW-462.3(a) ( Trans. R&F ) Type QW-462.3(b) ( Long, R&F ) Result
Type & Fig No. Result Type & Fig No. Result
Visual Examination results Accepted Wednesday, 03 December, 2014

Radiographic Test results ( QW-304 and QW- 305 ) Accepted WQT-004
Fillet - Fracture test N/A Length and Percent of defects N/A inch
Macro Test Fusion N/A Fillet Leg Size N/A inch x N/A in Concavity/ Convexity N/A inch
Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Raiographic Tests Conducted by: FILCONFAB Services Inc.
We certify that the staetements in this record are correct and that the test coupons were prepared, welded and tested in accordance with the requirements of
Section IX of the ASME Code.
Prepared by: Reviewed by:

Rhannie M. Garcia Rosen M. Naranjo
Name Name
QA/QC BSTECH Signature QA/QC BSTECH Signature
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Mhel Dimalibot Welders No.: BST-W-171


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O

Visual Examination results Accepted Monday, 07 December, 2015



Name Name
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Dick De Lima Welders No.: BST-W-172


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O




Name Name
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Joseph Jore Welders No.: BST-W-173


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O




Name Name
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Joseph Candia Welders No.: BST-W-174


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O




Name Name
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Rommel Jumawan Welders No.: BST-W-175


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O




Name Name
Date Date

CORPORATION

Batangas Picture
Telefax No.: (043) 980-1731
Phone No.: (043) 980-5639
Welder Name Elmer Romano Welders No.: BST-W-176


P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

: F, O
NPS 2-1/2" ≤ Pipe ≤24" O.D.
:F
: F, H, O




Name Name
Date Date

Record of Welder Performance Qualification: Picture

Uploaded by

Copyright:

Available Formats

Record of Welder Performance Qualification: Picture

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Record of Welder Performance Qualification: Picture

Uploaded by

Copyright:

Available Formats

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Rey Marquinez Welders No.: BST-W-019

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Wednesday, 03 December, 2014

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Mhel Dimalibot Welders No.: BST-W-171

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Monday, 07 December, 2015

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Dick De Lima Welders No.: BST-W-172

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Monday, 07 December, 2015

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Joseph Jore Welders No.: BST-W-173

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Monday, 07 December, 2015

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Joseph Candia Welders No.: BST-W-174

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Monday, 07 December, 2015

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Rommel Jumawan Welders No.: BST-W-175

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate

GUIDED BEND TEST RESULTS ----N/A

Visual Examination results Accepted Monday, 07 December, 2015

Welding Test Conducted by: BSTECH ENG. CONSTRUCTION CORP.

Prepared by: Reviewed by:

RECORD OF WELDER PERFORMANCE QUALIFICATION

Welder Name Elmer Romano Welders No.: BST-W-176

VARIABLES Actual Values Range Qualified

P-No.1 ~ 11, P-No.34, P-No.41 ~ 47 and

Groove : All Plate