Contents 2
Contents
Contents 2
Introducing Auto-Tune Realtime Access 3
What is Auto-Tune Realtime Access? 3
What Kind of Audio is Appropriate for Auto-Tune? 3
Quick Start 4
Step 1 - Open Auto-Tune Realtime Access 4
Step 2 - Choose the Correct Key and Scale 4
Step 3 - Choose your Retune Speed and Humanize Settings 4
Controls 5
Key and Scale 5
Retune Speed 6
Humanize 6
Pitch Display and Pitch Change Meter 6
Keyboard 7
Preferences Button 8
Preferences 9
Enable Auto-Key Detection 9
Show Tooltips 9
Tracking 9
Check for Updates 9
Save as Default 10
Contents 3
Introducing Auto-Tune Realtime
Access
What is Auto-Tune Realtime Access?
For twenty years, Auto-Tune has been the world standard for professional pitch
correction, and the tool of choice for the most iconic vocal effect in popular music.
Now, with Auto-Tune Realtime Access, we're proud to bring that same technology to the
UAD platform, with a simple and intuitive interface.
What Kind of Audio is Appropriate for Auto-Tune?
Auto-Tune requires a single well-isolated sound source such as a solo voice, or a single
instrument playing one pitch at a time. Noise or extreme breathiness in vocal
performance can sometimes lead to tracking errors, which can often be remedied by
adjusting the Tracking setting.
Contents 4
Quick Start
Below is a quick overview of the Auto-Tune Realtime Access workflow.
Step 1 - Open Auto-Tune Realtime Access
Place Auto-Tune Realtime Access on an audio track in your DAW. For best pitch
correction results, use it on a vocal track with only one singer, or an instrumental track
that does not include chords or multiple pitches sounding at once.
If you are using Auto-Tune Realtime Access with a UA audio interface, load it as an
insert in the Console application for the lowest possible latency when tracking in
real-time.
Step 2 - Choose the Correct Key and Scale
Set the Key and Scale parameters to match the actual key and scale of your music.
If you’re not sure what key your music is in, you can use the Auto-Key plug-in (sold
separately) to automatically detect it and send that information to Auto-Tune Realtime
Access.
You can also use the K eyboard to customize your scale by turning individual notes on
and off.
Step 3 - Choose your Retune Speed and Humanize Settings
Set the Retune Speed to determine how quickly Auto-Tune Realtime Access tunes your
audio to the target pitches. For a pronounced Auto-Tune Effect, set the Retune Speed to
Fast. For more natural-sounding pitch correction, set it to Medium or Slow.
For more natural-sounding pitch correction on sustained notes, turn up H umanize.
Contents 5
Controls
Key and Scale
The Key and Scale parameters are used to define the set of
notes that your audio will be tuned to. For best results, set them
to match the actual key and scale of your music.
The K eyboard is automatically updated to show which notes are active for the current
Key and Scale selection.
If you’re not sure what key your music is in, you can use the Auto-Key plug-in (sold
separately) to automatically detect it and send that information to Auto-Tune Realtime
Access.
Contents 6
Retune Speed
Set the Retune Speed to determine how quickly Auto-Tune
Realtime Access tunes your audio to the target pitches.
For a pronounced Auto-Tune Effect, set the Retune Speed to Fast.
For more natural-sounding pitch correction, set it to Medium or
Slow.
Humanize
The Humanize function allows you to add realism to sustained
notes by preserving subtle variations in pitch.
Humanize applies a slower Retune Speed only during the
sustained portion of longer notes. If the pitch of a sustained note
sounds unnaturally static, set Humanize to Minimum or Maximum
to reintroduce subtle pitch deviations from the original recording.
Pitch Display and Pitch Change Meter
Pitch Display
The Pitch Display shows you the letter name of the
pitch that Auto-Tune Realtime Access is currently
outputting.
To see the pitch that is currently being detected in the
incoming audio, look at the blue highlighted note in the
Keyboard.
Pitch Change Meter
The Pitch Change Meter (which wraps around the Pitch Display) shows you how much
the detected pitch is being re-tuned (measured in cents).
Contents 7
Hold
Clicking and holding the word “Hold” will freeze both the Pitch Change Meter and the
blue detected pitch indication on the Keyboard for as long as you hold down the mouse
button.
Keyboard
The Keyboard displays the current detected pitch by highlighting it in blue, and also
allows you to add and remove notes from the scale.
When a note on the Keyboard is On, it will appear white or black
(depending on which note it is), and input pitches that are closest to
that note will be tuned to it.
When a note on the Keyboard is set to Off, it will appear grey, and any
incoming pitches that are closest to that note will be tuned to the next
closest scale note instead.
When a note on the Keyboard is displayed in blue, that indicates the current
detected pitch.
Contents 8
Preferences Button
The Preferences button opens the Preferences Window, where you can set
default preferences.
Contents 9
Preferences
Enable Auto-Key Detection
Auto-Key is a plug-in (sold separately) that automatically detects the key of your music,
and then sends that information to Auto-Tune Realtime Access. The only time you
should need to turn this off will be if you are using Auto-Key, but you want this specific
instance of Auto-Tune Realtime Access to ignore any messages coming from it.
Show Tooltips
Tooltips are helpful hints that pop up when you hover over one of the controls in
Auto-Tune Realtime Access. If you don’t want to see them, you can turn them off here.
Choosy Tracking
In most cases, this should be left at its default setting of enabled. Try disabling it if
audio is noisy or poorly isolated and pitch correction becomes unreliable.
Save as Default
Check this box before clicking the Save button to set the default settings for any new
instances of Auto-Tune Realtime Access.
