Scribd
Upload
82 views

DMME, Introduction To Engineering Drawing 115 - IED511S, Semester 1, 2022, NA

This document provides instructions for two tutorial exercises on first and third angle projections of 3D models. Students are asked to extract orthographic views, sectional views, and isometric views of two objects using both first and third angle projections. They are also asked to assemble parts provided into three assemblies, and create orthographic views, sectional views, and an isometric view of each assembly. Guidelines are provided for scales of the views and indicating dimensions. Sample component views and assembly diagrams are included.

Uploaded by

Broimout
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
82 views

DMME, Introduction To Engineering Drawing 115 - IED511S, Semester 1, 2022, NA

This document provides instructions for two tutorial exercises on first and third angle projections of 3D models. Students are asked to extract orthographic views, sectional views, and isometric views of two objects using both first and third angle projections. They are also asked to assemble parts provided into three assemblies, and create orthographic views, sectional views, and an isometric view of each assembly. Guidelines are provided for scales of the views and indicating dimensions. Sample component views and assembly diagrams are included.

Uploaded by

Broimout
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

TUTORIAL 11

 First and third angle projections from 3D models

Download the file with a name “EXERCISE T11.1_FILE” from MS Teams/eLearning.

Object 1 Object 2

Question 1
a) Using first angle projection, extract the front, top and left side views of Object 1. Draw the center lines and
fully dimension the views.
b) Extract the full sectional front view. Do not dimension.
c) Extract the 3D/Isometric view. Do not dimension
d) The scale of 3D/Isometric view should be twice the scale of orthographic views.

Question 2
a) Using third angle projection, extract the front, top and left side views of Object 2. Draw the center lines and
fully dimension the views.
b) Extract the full sectional front view. Do not dimension.
c) Extract the 3D/Isometric view. Do not dimension
d) The scale of 3D/Isometric view should be twice the scale of orthographic views.

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


1
TUTORIAL 11

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


2
TUTORIAL 11

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


3
TUTORIAL 11

 Case studies [Assembly drawings]

Download the file with a name “EXERCISE T11.2_FILE” from MS Teams/eLearning.

Questions

a) Using the given parts, assemble them to obtain the assemblies.


b) Using third angle projection, extract the front, top and left side views of your assembly. Indicate the major
dimensions only.
c) Extract full sectional views to show the common hidden features of your assembly and use the balloons to
indicate the parts (do not dimension).
d) Extract the 3D/Isometric drawing of your assembly (do not dimension).

Assembly One

Each square is equals to 10 millimetres.

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


4
TUTORIAL 11

Assembly Two

Assembly Three

You may notice that some features of some parts i.e. pin hole, are not drawn. Complete those parts before you start
assembling.

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


5
TUTORIAL 11

Top view of the body Front view of the body

Dimensions of the components

DMME, Introduction to Engineering Drawing 115 - IED511S, Semester 1, 2022, NA


6

You might also like