Scribd
Upload
1K views1 page

ISO 1179-1 - Flat Face Port With British Standard Pipe, Parallel (BSPP) Threads

This document provides specifications for flat face ports with British Standard Pipe Parallel (BSPP) threads according to ISO 1179-1. It includes thread sizes from G 1/8-28 to G 2-11, with corresponding dimensions for port diameter, elastic seal length, O-ring size, retaining ring part number, and bonded washer part number. All dimensions and pressures listed are for reference only and subject to change.

Uploaded by

vijayanth g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

ISO 1179-1 - Flat Face Port With British Standard Pipe, Parallel (BSPP) Threads

This document provides specifications for flat face ports with British Standard Pipe Parallel (BSPP) threads according to ISO 1179-1. It includes thread sizes from G 1/8-28 to G 2-11, with corresponding dimensions for port diameter, elastic seal length, O-ring size, retaining ring part number, and bonded washer part number. All dimensions and pressures listed are for reference only and subject to change.

Uploaded by

vijayanth g
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

4300 Catalog General Technical

ISO 1179-11) — Flat Face Port with British Standard Pipe, Parallel (BSPP) Threads Return
To
(DIN 3852, Part 2) Index

ISO 228-1 “G” Threads

D4 EOlastic Seal O-Ring and Retaining Ring


(mm) (Type E) (Types G & H)3
Thread Narrow Wide L1 L2 Bonded
Size D3 Types Types max. min. Parker O-Ring I.D. x Section Retaining Ring Washer
(ISO 228-1) (mm) B&E G&H (mm) (mm) Part Number O-Ring Size2 (mm) Part Number Part No.4
G 1/8-28 9.9 15 17.2 1.0 8.5 ED10X1X 5-585 7.98 x 1.88 1/8 Retaining Ring D9DT-2
G 1/4-19 13.3 20 20.7 1.5 12.5 ED14X1.5X 2-111 10.77 x 2.62 1/4 Retaining Ring D9DT-4
G 3/8 19 16.8 23 24.5 2.0 12.5 EDR3/8X 2-113 13.94 x 2.62 3/8 Retaining Ring D9DT-6
G 1/2-14 21.1 28 34.0 2.5 14.5 EDR1/2X 5-256 17.96 x 2.62 1/2 Retaining Ring D9DT-8
G 3/4-14 26.6 33 40.0 2.5 16.5 ED26X1.5X 2-119 23.47 x 2.62 3/4 Retaining Ring D9DT-12
G 1-11 33.5 41 46.1 2.5 18.5 ED33X2X 2-217 29.74 x 3.53 1 Retaining Ring D9DT-16
G 1 1/4-11 42.2 51 54.0 2.5 20.5 ED42X2X 2-222 37.69 x 3.53 1 1/4 Retaining Ring D9DT-20
G 1 1/2-11 48.1 56 60.5 2.5 22.5 ED48X2X 2-224 44.04 x 3.53 1 1/2 Retaining Ring D9DT-24
G 2-11 59.9 69 73.3 3.0 26.0 — — — — D9DT-32

Table U20 — Port Detail — ISO 1179-1


1) Conforms to proposed revision.
2) 90 durometer nitrile is standard for hydraulic applications.
3) See page O5 for O-ring and retaining ring ordering information.
4) See page O6 for details.

Dimensions and pressures for reference only, subject to change.

U29 Parker Hannifin Corporation


Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd

You might also like