Section: Technical: Question Type: MCQ Question ID: 673502929 Status: Answered Chosen Option: B
Section: Technical: Question Type: MCQ Question ID: 673502929 Status: Answered Chosen Option: B
Section : Technical
Q.1
Ans A.
B.
C.
D.
Ans
A.
B.
C.
D.
Q.3
Ans A.
B.
C.
D.
Q.4 Which of the following is NOT a time domain specification of a second order system?
Ans A. Rise time
B. Settling time
C. Maximum overshoot
D. Time constant
Q.6
Ans A.
B.
C.
D.
Ans
A.
B.
C.
D.
Q.8 Which of the following will be done in an 8085 microprocessor when an instruction LXI H
2070H is executed?
Ans A. Content of the memory 2070H is loaded in H register.
Q.9
Ans A.
B.
C.
D.
Q.11 न न म से कस उपकरण नयं ण बस को 'IEEE-488 बस' (‘IEEE-488 bus’) कहा जाता है?
Ans A. GPIB
B. ईथरनेट (Ethernet)
C. PCI
D. USB
Q.13 एकल फेज प रपथ क वो टता और धारा समीकरण यु म: 2V + 3I = 530; V − I = 190 के सापे है। य द
श गुणक 0.8 है, तो प रपथ का श कतना है?
Ans A. 3.3 kW
B. 5.28 kW
C. 2.64 kW
D. 6.6 kW
Q.16
Ans A.
B.
C.
D.
Q.17
Ans A.
B.
C.
D.
Ans A.
B.
C.
D.
Q.19 Energy lost due to hysteresis during each cycle in the core of a transformer working at 50
Hz is 6 J. What will be the power loss due to hysteresis?
Ans A. 600 W
B. 100 W
C. 300 W
D. 200 W
Q.20 BJT के लए, य द सं ाही और उ सजक धाराएं मशः 147 mA और 150 mA ह, तो धारा अनुपात (β) ात
कर।
Ans A. 0.98
B. 98
C. 49
D. 0.49
B. Conductor
C. Intrinsic semiconductor
D. Insulator
Q.22 Latency measures the delay in data transmission across the bus. Which of the following
instrumentation buses has the best latency specification that is minimum delay?
Ans A. USB
B. GPIB
C. PCI
D. Ethernet
B. व ुतरोधक
C. चालक
D. अधचालक
Q.24
Ans A.
B.
C.
D.
Ans
A.
B.
C.
D.
Q.26 8255A PPI म, न न म से कस मोड म पोट A को एक दश डेटा बस के प म उपयोग कया जाता है?
Ans A. मोड 0
B. मोड 2
C. मोड 1
D. BSR मोड
Q.27 अंकग णतीय तक इकाई (ALU), नयं ण इकाई (CU) और ______ 8085 माइ ो ोसेसर क तीन मु य
इकाइयाँ ह।
Ans A. पंजी (र ज टस)
C. या छक अ भगम मृ त (RAM)
D. LED ड ले
B. 16; 20
C. 12; 16
D. 20; 16
Q.29
Ans A.
B.
C.
D.
Q.30 कसी प रपथ म, कसी नोड पर, तीन शाखाएं मलती ह। नोड म आने वाली धारा (incoming current) 2 A है
और इनम से दो शाखा से जाने वाली धारा (outgoing current) 3 A है। तीसरी शाखा म ______ होगी।
Ans A. जाने वाली धारा –1 A
Ans A.
B.
C.
D.
Q.32 एक अध योजक प रपथ (हॉफ एडर स कट) के लए आव यक NAND गेट क सं या ______ है।
Ans A. छह
B. चार
C. तीन
D. पाँच
Q.33 ‘Capability evaluations’ come under which of the following categories of quality costs?
Ans A. Cost of Poor Quality : Internal Failure Costs
Q.34 If the deflecting torque is A, controlling torque is B and damping torque is C, then for an
indicating type instrument:
Ans A. A = C
B. A + C = B
C. A = B
D. B = C
B. X is silicon; Y is germanium
D. X is germanium; Y is silicon
Q.36 कं यूटर के साथ व ुत यं को नयं त करने के लए अ य धक मानक बस GPIB है। इसका पूण प या
होता है?
Ans A. जनरल पपज़ इं ा चर बस (General Purpose Infrastructure Bus)
Q.37
Ans A.
B.
C.
D.
Q.39
Ans
A.
B.
C.
D.
Q.40 In a thyristor converter drive, during ______ the firing angle is maintained to achieve
controlled and predictable deceleration at all times.
Ans A. chopping
B. controlled modulation
C. surging
D. braking
C. Hair dryer
D. Autonomous car
B. 97.32%
C. 98.52%
D. 48.66%
Q.43 The register used to store the memory address location of the next instruction to be
executed is called:
Ans A. program counter
B. flags
C. address register
D. accumulator
B. 20 V
C. 15 V
D. 1 V
Ans A.
B.
C.
D.
Q.47 So as to eliminate the effect of lead and contact resistances while measuring low valued
resistances, the ______ is used.
Ans A. Kelvin double bridge
B. Owen’s bridge
C. Hay’s bridge
Q.48
Ans A.
B.
C.
D.
Ans A.
B.
C.
D.
B. नाइ ोम
C. तांबा
D. टं ग टन
Q.51 During the testing of an energy meter, what are the required voltage and current conditions
for a creep test?
Ans A. Applied voltage: marked value of voltage; Applied current: open circuit
B. Applied voltage: 110% of marked value of voltage; Applied current: 0.5% of marked
value of current
C. Applied voltage: 110% of marked value of voltage; Applied current: open circuit
D. Applied voltage: marked value of voltage; Applied current: 0.5% of marked value of
current
B. सोना
C. कंथाल
D. लै टनम
Q.54
Ans A.
B.
C.
D.
B. Varactor diode
C. Photo diode
D. LED
Q.56
Ans A.
B.
C.
D.
C. Voltage stabiliser
Q.58 In a common base connection, if the current amplification factor is 0.9 and the emitter
current is 1 mA, then the base current is given is:
Ans A. 0.1 mA
B. 1.11 mA
C. 1.9 mA
D. 0.9 mA
B. लै चग
C. गेट-ऑन
D. ऑफ- लॉ कग
Q.60
Ans A.
B.
C.
D.
Q.61 Which of the following statements is correct regarding bridges available for inductance
measurement?
Ans A. Hay’s bridge is used for coils having Q > 10, whereas Maxwell's bridge is used for
very high Q coils.
B. Hay’s bridge is used for coils having Q < 10, whereas Anderson’s bridge is used for
very low Q coils.
C. Hay’s bridge is used for coils having Q < 10, whereas Anderson’s bridge is used for
very high Q coils.
D. Hay’s bridge is used for coils having Q > 10, whereas Maxwell's bridge is used for
coils having 1 < Q < 10.
Ans A.
B.
C.
D.
B. 4 - 20 mA
C. 50 - 80 mA
D. 40 - 100 mA
Q.64 For contactless body temperature measurement, advanced thermometers are used. They
are based on:
Ans A. alpha particles
B. ultra-violet radiation
C. infrared radiation
D. laser beams
B. ₹15760
C. ₹5760
D. ₹12250
Q.67 Two coils with a coefficient of coupling of 0.5 between them are connected in series so as
to magnetise in the same direction and in the opposite direction. The corresponding values
of total inductances are 1.9 H and 0.7 H, respectively. Identify the self-inductances of the
two coils.
Ans A. 0.8 H and 0.6 H
Q.68
Ans A.
B.
C.
D.
Q.70 ूट अनुपात 0.5 और ोत वो टता 50 V वाले चॉपर के आउटपुट का औसत मान या होगा?
Ans A. 100 V
B. 50 V
C. 200 V
D. 25 V
B. 0101
C. 0111
D. 1100
Ans A.
B.
C.
D.
Q.75 जम नयम अधचालक का रो धका वभव (बै रयर पोट शयल) लगभग ______ होता है।
Ans A. 1.2 V
B. 0.7 V
C. 1 V
D. 0.3 V
B. 1.5 V
C. 1.2 V
D. 2.5 V
Ans A.
B.
C.
D.
Q.78 To optimise the economic limit, power factor is improved by installing ______.
Ans A. static capacitors
B. transformers
C. energy meters
Q.79
Ans A.
B.
C.
D.
B. य पता भगमन
D. अ य पता भगमन
Q.81 य द कसी संकेत (signal) के संचरण से पहले उसे संवे दत कया जाता है, उस संकेत पर कई बार रै खक या
गैर-रै खक सं या क जाती है। इस या को या कहा जाता है?
Ans A. संकेत अनुकूलन (signal conditioning)
Q.82 गुणव ा लागत क न न म से कस ेणी के अंतगत आप ‘माप और परी ण उपकरण के अंशांकन’ को वग कृत
करगे?
Ans A. अ छ गुणव ा क लागत : मू यांकन लागत
Q.83 कसी वो टमीटर म –15 V से 5 V तक पैमाना (scale) है। इसक व तृ त ( पैन) ात कर।
Ans A. 5 V
B. –15 V
C. 15 V
D. 20 V
Q.85 AC से AC क वटर म, वो टता को ______ ारा जबरन क यूटेशन का इ तेमाल करके नयं त कया जाता है।
Ans A. गेट टन-ऑफ थाइ र टस (GTO)
B. गेटेड ऑफ ां ज टर गेटेड टन ऑन ां ज टर
Q.86 If semiconductor M has a knee voltage of 0.7 V, whereas semiconductor N has a knee
voltage of 0.3 V, then:
Ans A. M is germanium; N is silicon
D. M is silicon; N is germanium
Q.87 The stator of a three-phase induction motor has six slots per pole per phase. What is the
total number of stator poles produced?
Ans A. 3
B. 6
C. 12
D. 18
Note: For this question, discrepancy is found in question/answer. Full Marks is being
awarded to all candidates.
Ans A.
B.
C.
D.
Q.89 एक उपभो ा के पास येक 40 W के पांच लप और येक 300 W के दो पंख ह। औसतन, वह दन म पांच
घंटे इन उपकरण का उपयोग करता है। अ ैल महीने के लए ऊजा क खपत क गणना कर।
Ans A. 60 kWh
B. 120 kWh
C. 124 kWh
D. 62 kWh
Ans A.
B.
C.
D.
Q.1 वह वक प चुन जो तीसरी सं या से उसी कार संबं धत है, जस कार सरी सं या पहली सं या से संबं धत
है।
B. 1008
C. 293
D. 984
1 ) A + B का अथ है क B का बेटा A है।
2 ) A × B का अथ है क B का पता A है।
3 ) A – B का अथ है क B क बहन A है।
B. P + Q × R × S
C. Q – P × R – S
D. P + Q – R × S
B. 74
C. 76
D. 72
Q.4 एक सुबह, राम यारी द ण क ओर 7 कमी चलती है और फर अपनी दा ओर मुड़ जाती है। 6 कमी चलने के
बाद, वह अपनी बा ओर मुड़ कर 9 कमी चलती है। फर, वह अपनी दा ओर मुड़ कर 2 कमी चलती है। अब
वह अपने ारंभ ब से कस दशा म है?
Ans A. द ण – प म
B. उ र – प म
C. द ण
D. प म
Q.5 Q क बहन P है, Q क माँ R है और R का पता S है। तो बताएँ क S से P कैसे संबं धत है?
Ans A. ना तन
B. बेट
C. माँ
D. नानी
Ans
A.
B.
C.
D.
Q.7
Ans A.
B.
C.
D.
Q.8
Ans A.
B.
C.
D.
Ans
A.
B.
C.
D.
B. 72
C. 99
D. 88
B. 9
C. 17
D. 18
Q.12 छह म एक गोलाकार मेज पर क क मुंह करके बैठे ह। सूरज और तुषार के बीच गगन बैठा है। मुकेश और
मयूर के बीच र नेश बैठा है। मुकेश के बाएँ सूरज बैठा है। गगन के दाएँ से सरा कौन है?
Ans A. तुषार
B. मयूर
C. मुकेश
D. सूरज
Q.13
Ans
A.
B.
C.
D.
169 : 13 :: 361 : ?
Ans A. 18
B. 20
C. 19
D. 17
Q.15
Ans A.
B.
C.
D.
B. 350
C. 640
D. 805
B. S
C. T
D. P
Q.18 एक सुबह, लाव या और चेरी एक ॉ सग पर एक- सरे से आमने-सामने बात कर रहे थे। य द चेरी क छाया
लाव या के ठ क दा ओर पड़ रही थी, तो लाव या का मुँह कस दशा म था?
Ans A. द ण
B. पूव
C. उ र
D. प म
Q.19 वह वक प चुन जो तीसरी सं या से उसी कार संबं धत है, जस कार सरी सं या पहली सं या से संबं धत
है।
6 : 36 :: 12 : ?
Ans A. 36
B. 84
C. 144
D. 120
B. 35
C. 38
D. 36
B. Ctrl + H
C. Ctrl + T
D. Ctrl + Y
B. Secure ( स योर)
C. Service (स वस)
D. Seamless (सीमलेस)
B. 8 नबल
C. 8 बाइट
D. 16 बट
(i) वडोज़ संचालन णाली (ऑपरे टग स टम) GUI का समथन करती है।
(ii) यू न स (Unix) एक ब -उपयोगकता संचालन णाली (ऑपरे टग स टम) है।
Ans A. केवल (i)
C. केवल (ii)
D. न तो (i) न ही (ii)
B. $AB$1
C. $AA$5
D. $AZ$10
B. इनपुट-आउटपुट पोट
C. RAM
Q.9 न न म से कस कुंजी संयोजन का उपयोग वतमान लाइड से एम.एस.-पॉवर वाइंट 2016 (MS-PowerPoint
2016) म लाइडशो शु करने के लए कया जा सकता है?
Ans A. Shift + F5
B. Ctrl + F4
C. Shift + F4
D. Ctrl + F5
Q.10 Which of the following protocols is used for file transfer between computers connected to
the Internet?
Ans A. TELNET
B. SMTP
C. HTTP
D. FTP
Q.11 Which of the following is used to convert a file into a portable format?
Ans A. WinZip software
B. Antivirus
C. Web browser
D. Acrobat Writer
B. व न ाही (Microphone)
C. मु क (Printer)
D. आले ख (Plotter)
Q.13 Which of the following allows to connect hardware devices such as mouse and keyboard to
your computer?
Ans A. USB port
B. Power connector
C. AGP slot
D. Capacitor
B. compression software
C. graphics software
D. language processor
B. समकरण (ज टफाई)
C. बाएँ
D. दाएँ
B. यू न स (Unix)
C. वडोज़ (Windows)
D. वडपैड (WordPad)
C. बाइडू (Baidu)
D. ोम (Chrome)
Q.18 कं यूटर स टम म इनपुट और आउटपुट डवाइस के लए CPU, RAM, हाड ाइव और पोट, ये सभी ______ म
थत होते ह।
Ans A. RAM
B. मदरबोड
C. क -बोड
D. ROM
Q.19 न न म से कस क -बोड शॉटकट का उपयोग एम.एस.-वड 2016 (MS-Word 2016) डॉ युमट म पैरा ाफ
को सटर एलाइन करने (Center Align paragraphs) के लए कया जा सकता है?
Ans A. Ctrl + J
B. At + C
C. Ctrl + C
D. Ctrl + E
B. केवल (i)
C. न तो (i) न ही (ii)
D. केवल (ii)
Q.1 न न ल खत म से कस बॉलीवुड अ भनेता ने को वड-19 लॉकडाउन के कारण मुंबई म फंसे हजार वासी
कामगार क घर वापसी म मदद क थी?
Ans A. बॉबी दे ओल
B. अ भषेक ब चन
D. सोनू सूद
Q.2 कस भारतीय रा य क सीमा चार दे श के साथ लगती है अथात प म म भूटान, पूव म यांमार, उ र म त बत
और चीन?
Ans A. ओ डशा
B. मज़ोरम
C. अ णाचल दे श
D. झारखंड
Q.3 2020 के नोबल शां त पुर कार से कसे स मा नत कया गया है?
Ans A. व बक
B. व खा काय म
C. लोबल ीन ोथ इं ट ूट
D. व वा य संगठन
B. 15 नवंबर 1990
C. 1 जनवरी 1990
D. 2 अ टू बर 1990
B. तुक
C. भारत
B. नोवाक जोको वच
C. डे नयल मेदवेदेव
D. टे फानोस सत सपास
Q.7 इनम से कौन सा त मलनाडु म प गल के दौरान आयो जत होने वाला लोक य बुल टै मग (यानी सांड को
पकड़ने वाला) खेल है?
Ans A. च ी राय उ सव
B. ज लीक
C. महामहम
D. ना ांज ल
B. कनाडा
C. यूएस
D. जापान
B. 1858 का अ ध नयम
B. 1949
C. 1950
D. 1948