Vapor Permeable

Air Barrier 3015VP

Technical Data February 2016

Technical Data August 2017

Product Description 3M™ Vapor Permeable Air Barrier 3015VP is a water vapor permeable,
air and water impermeable membrane with an aggressive, high-tack
acrylic adhesive that does not require the use of a primer on most
construction surfaces.

Product Construction Backing Adhesive Colors Liner

Elastomeric Coated Acrylic Pattern White Polyester

Nonwoven Coated

Typical Physical Note: The following technical information and data should be considered
Properties representative or typical only and should not be used for specification purposes.

ASTM Test Method

Liner Thickness: 3 mils (0.078 mm) ASTM D3652
Total Thickness (coated membrane): 15 mils (0.50 mm) ASTM D3652
Tensile Strength (coated membrane): 1177 psi (8.1 MPa) ASTM D882
Elongation at Break: 40% ASTM D882
Lap Adhesion (Stainless Steel): 50 oz./in (0.44 N/mm) ASTM D3330

Water Vapor Transmission per ASTM E96, US perms

Dry Cup 12
Wet Cup 17
Nail Sealability
127 mm (5 inches) water head after 3 days Dry / Pass ASTM D1970-14,
Section 7.9

Surface Burning Characteristics

Flame Spread Index 5 per ASTM E84
Smoke Developed Value 0 per ASTM E84
Rating Class A

1
3M™ Vapor Permeable Air Barrier3015VP
Features • Meets the requirements of ASTM E2178 and CAN/ULC S741-8.
• Passes NFPA 285 as part of various exterior wall constructions.
•Service temperature from -40° to 240°F (-40° to 116°C).
• Can be applied to substrates from 0° to 150°F (-18° to 66°C).
• Permeable to water vapor, impermeable to air and water.
• Resists UV exposure for up to 12 months.
• Compatible with many building sealants: No adverse reaction with
synthetic rubber, butyl, polyurethane, silicone and silane terminated
hybrid sealants.
• Excellent adhesion to concrete, concrete block, anodized aluminum,
galvanized metal, plywood and most exterior grade fiberglass matt
gypsum boards without the use of any primer. Contact your local 3M
Sales Representative or refer to the Technical Bulletins for details.
• Adhesive provides a unique combination of both cold and hot
temperature adhesion to most substrates, which can extend the
construction season in many climates.
• Unique adhesive even adheres to damp surfaces that have not absorbed
water, like metals, glass and plastics.
• Seals around nails and staples to prevent moisture intrusion.

Surface Preparation To obtain the best adhesion, 3M™ Vapor Permeable Air Barrier 3015VP
should be installed when outdoor temperatures range from 0°F (-18°C)
to 150°F (66°C).

• Surfaces should be clean, free from dirt and debris and have not
absorbed water.
• Surfaces should be free of any damaged, unsupported areas, sharp
protrusions or voids.
• Concrete must be cured a minimum of 7 days before application.
• Block or brick walls should have mortar joints stuck flush.
• While it can be applied as low as 0°F (-18°C), surfaces must be clear of
snow, ice or frost.
• Adheres to most common building materials. For difficult to stick to
surfaces, test adhesion before application. If needed, apply 3M™ Hi-
Strength 90 Spray Adhesive, 3M™ Hi-Strength 94 ET Spray Adhesive,
3M™ Holdfast 70 Spray Adhesive or 3M™ Fastbond™ Contact Adhesive
30NF to prime the substrate prior to applying the membrane. Products
are available as either an aerosol or cylinder spray adhesive.

2
3M™ Vapor Permeable Air Barrier 3015VP

Application Instructions Refer to 3M™ Vapor Permeable Air Barrier 3015VP Installation
Guide for detailed application information.

• Remove outer protective film to expose adhesive surface.

• Must be lapped a minimum of 2" on sides and ends. Remove

protective film cover before installing the next layer.

• No primer is needed on most construction surfaces.

• The adhesive is very aggressive and quickly bonds to substrates.

Do not contaminate the adhesive area with dust or debris before
applying it to the intended surface. Be careful when aligning
product on the wall as repositioning may be challenging.

• Once aligned, set the membrane in place by rolling the product

back against the exposed adhesive. Unwind the roll while
maintaining pressure against the wall to tack the membrane in
place. Wipe the membrane down with a feathering motion from
the middle outward to obtain a smooth surface. For best air barrier
membrane performance, roll the membrane with a rubber roller to
ensure a tight seal against the wall and between overlapped
edges.

• Remove film covering membrane.

• Detail work must be carefully executed to ensure a continuously

sealed building envelope.

• Rough openings may be flashed with detail widths of 3M™ Air

and Vapor Barrier 3015.

3
3M™ Vapor Permeable Air Barrier 3015VP

Storage Optimum storage conditions are 60° to 80°F (16° to 27°C) and 40 to 60% relative
humidity in the original packaging material.

Shelf Life To obtain best performance, use this product within 24 months from date of
manufacture.

Technical Information The technical information, guidance, and other statements contained in this document or
otherwise provided by 3M are based upon records, tests, or experience that 3M believes
to be reliable, but the accuracy, completeness, and representative nature of such
information is not guaranteed. Such information is intended for people with knowledge
and technical skills sufficient to assess and apply their own informed judgment to the
information. No license under any 3M or third party intellectual property rights is granted
or implied with this information.

Product Selection Many factors beyond 3M’s control and uniquely within user’s knowledge and control can
affect the use and performance of a 3M product in a particular application. As a result,
and Use customer is solely responsible for evaluating the product and determining whether it is
appropriate and suitable for customer’s application, including conducting a workplace
hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA,
ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate
safety products, or to meet all applicable safety regulations, may result in injury, sickness,
death, and/or harm to property.

Warranty, Unless a different warranty is specifically stated on the applicable 3M product packaging
or product literature (in which case such warranty governs), 3M warrants that each 3M
Limited Remedy, product meets the applicable 3M product specification at the time 3M ships the product.
and Disclaimer 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A
COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not
conform to this warranty, then the sole and exclusive remedy is, at 3M’s option,
replacement of the 3M product or refund of the purchase price.

Limitation of Liability Except for the limited remedy stated above, and except to the extent prohibited by law, 3M
will not be liable for any loss or damage arising from or related to the 3M product, whether
direct, indirect, special, incidental, or consequential (including, but not limited to, lost
profits or business opportunity), regardless of the legal or equitable theory asserted,
including, but not limited to, warranty, contract, negligence, or strict liability.
ISO 9001

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system
registered to ISO 9001 standards.

Industrial Adhesives and Tapes Division

3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax) 3M is a trademark of 3M Company.
www.3M.com/industrial ©3M 2017 (8/17)