0% found this document useful (0 votes)
197 views12 pages

NF-801 User Manual

This document provides an instruction manual for a wire tracker device. It describes the interfaces and functions of the emitter and receiver parts, including telephone cable tracing, network cable tracing, electric wire tracing, network cable collation, open/short circuit testing, DC level testing, and other accessory functions. The wire tracker can be used to trace wires connected to switches, patch panels, routers, and more. It includes features like volume adjustment, spotlight, low battery alarm, and energy saving modes.

Uploaded by

charles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
197 views12 pages

NF-801 User Manual

This document provides an instruction manual for a wire tracker device. It describes the interfaces and functions of the emitter and receiver parts, including telephone cable tracing, network cable tracing, electric wire tracing, network cable collation, open/short circuit testing, DC level testing, and other accessory functions. The wire tracker can be used to trace wires connected to switches, patch panels, routers, and more. It includes features like volume adjustment, spotlight, low battery alarm, and energy saving modes.

Uploaded by

charles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

MODEL:NF-801B

Your excellent helper in cable test!

INSTRUCTION MANUAL
Wire Tracker

ORIGINAL
AUTHENTIC
Patented products,
rfeiting not allowed
Counte

REV1.0
Contents

i n t e r f a c e s a n d f u n c t i o n s ...............................................1
P a r t s o f e m i t t e r ...................................................................1
P a r t s o f r e c e i v e r .................................................................1
Te l e p h o n e c a b l e t r a c i n g f u n c t i o n ..............................2
N e t w o r k c a b l e t r a c i n g f u n c t i o n...................................3
E l e c t r i c w i r e t r a c i n g f u n c t i o n......................................4
N e t w o r k c a b l e C o l l a t i o n f u n c t i o n ..............................5
O t h e r s f u n c t i o n ................................................................6
O p e n c i r c u i t o r s h o r t c i r c u i t t e s t i n g f u n c t i o n ..............6
D C l e v e l t e s t i n g f u n c t i o n ..................................................6
A c c e s s o r i e s.........................................................................7
S p e c i f i c a t i o n o f p r o d u c t .............................................8
D i a g r a m o f s e r i e s p r o d u c t s ..........................................9

Your excellent helper in cable test!


interfaces and functions
Find wire on all types of connected operating
Ethernet switch/Router/PC terminal

Parts of emitter Parts of receiver

Probe
Wire finding
indicator

Signal indicator

Wire sequence
indicator

Inching button

Function
switchover button

DIP switch
Wire sequence
Testing indicator indicator

RJ11 socket Earphone jack

RJ45 socket

Spotlight switch Volume

Your excellent helper in cable test! 01


Telephone cable tracing function

1. Directly insert telephone wire with RJ11 plug into the RJ11 socket of emitter;
(Note: Never put energized telephone cable into RJ45 port, in fear of burnout to the tester)
2. Push DIP switch of emitter to position of“SCAN”then wire finding indicator
“STATUS”flashes, which means normal work of emitter;
3. Press the inching button, use the probe of receiver to find target wire at the other end;
4. During testing, function switchover button can be pressed for switchover of dual-tone.
Find wire on switch

CASE

Connect emitter with the Trace cable with receiver at


telephone line to be found the other end
Find wire on patch panel
CASE Ⅱ

Connect emitter with the Trace cable with receiver at


telephone line to be found the other end

02 Your excellent helper in cable test!


Network cable tracing function

1. Directly insert network cable into the RJ45 port of emitter;


2. Push DIP switch of emitter to position of “SCAN” then wire finding
indicator “STATUS”flashes which means normal work of emitter;
3. Press the inching button, use the probe of receiver to find target wire at the
other end;
4. During testing, function switchover button can be pressed for switchover of
dual-tone.
Find wire on router
CASE Ⅰ

Connect emitter with the Trace cable with receiver at


network cable to be found the other end
Find wire on net bar
CASE Ⅱ

Connect emitter with the Trace cable with receiver at


network cable to be found the other end

Your excellent helper in cable test! 03


Electric wire tracing function

1. Directly insert RJ11 of crococile clip into RJ11 port of emitter, connect
telephone line with the clamp;
2. Push DIP switch of emitter to position of ”SCAN”then wire finding
indicator “STATUS”flashes which means normal work of emitter;
3. Press the inching button, use the probe of receiver to find target wire at
the other end;
4. During testing, function switchover button can be pressed for switchover
of dual-tone.

Note: The equipment is prohibited to be used on heavy-current wires

Connect emitter with


electric wire to be found No need electric machine to drill !

How to find the wire from among so many wires?


It is so slow by using a multimeter.

04 Your excellent helper in cable test!


Network wire Collation function
1. Insert the two ends of the network
wire into Rj45 port emitter and receiver.
2. Push function switchover button on
emitter to the position of “TEST ”,
testing indicator “VERIFY” flashes
meaning normal work of emitter.
3. According to 18 indicators, judge
the characteristics of short-circuit,
breaking circuit, open circuit and
crossing.
4.During testing, function switchover button can be pressed for switchover
of fast and slow levels.

Note: The equipment is prohibited to


be used on heavy-current wires

Support direct wire collation


of operating switch

Replace the above


tester in cabling
It can take place of
cable tester
It can rapidly test open circuit/short
circuit and crossing through the 18
status indicators. which is accurate
and clear.

Your excellent helper in cable test! 05


Others function

Open circuit or short circuit testing function


Push DIP switch on emitter to position of“ TEST” , press function
switchoverbutton on emitter for 2 seconds, “ VERIFY” indicator will
change“ flash” to“ lighting” connect crocodile clamp with RJ11 port,
clamp the two ends of cable with crocodile clamps, in case of short circuit,
indicator “1” of emitter will light up, otherwise it will not. Impendance can
be indicated by brightness of status indicators: the lighter , the smaller the
resistance is; the darker, the bigger.

DC level testing function


Push DIP switch on emitter to position of“ SCAN” , press function
switchover button on emitter for 2 seconds, “ STATUS” indicator will turn
off and“ VERIFY” indicator flashes, insert the crystal plug of crocodile
clamp into RJ11, clamp the two ends of cable with crocodile clamps, in
case that“ STATUS” indicator lights up in red , it means the end
clamped by red clamp is positive pole, in case that “ STATUS”
indicator lights up in green, it means the end clamped by red clamp is
negative pole, electric level can be judged by brightness of the status
indicators; the lighter the indicator, the higher the level is; the darker, the lower.

test positive and negative pole of DC electric level

06 Your excellent helper in cable test!


Low voltaage alarm function
Push DIP switch on emitter to position of“SCAN”, if the that battery level
is lower than 6.0V,“STATUS”and“VERIFY”indicators will light up
at the same time, it indicates to have new battery.

Earphone function
In noisy environment, earphone can be
used to prevent interference from the outside.

Volume adjusting funcction


While tracing cable, volume can be
adjusted for moderate level of sound.

Spotlight function
You can easily work as usual with backlight at night and in dark.

Energy-saving
Inching switch can automatically delay power-off.
The continuous lifespan of battery is over 50 hours.

Accessories

RJ11 adapter cable Crocodile clip RJ45 adapter cable Earphone 9V battery

Your excellent helper in cable test! 07


Applicable users Applicable scope
Telecom bureau/net bar/telecom Wire engineering of telecom, network
engineering companies / network and regular maintenance work; network
engineering companies/power supply/ line engineering of computer; other wire
army and other departments requiring engineering and maintenance.
wire.

Specification of product

Item Specification
Product name Wire tracker
Power supply DC, 9V battery
Emitter ≤10mA
The max working current
Receiver ≤30mA
Signal transmission format Multi-frequency impulse
Signal output electric status 8Vp-p
Distance of signal transmission ≥2km
Emitter 126×49×34,mm
Appearance dimension Receiver 175×42×27,mm
Whole set 270×165×45,mm
Emitter 0.060kg
Weight Receiver 0.072kg
Whole set 0.420kg

The list of package

1. Emitter 1 piece 6. Cable with crocodile clamp 1 piece


2. Receiver 1 piece 7. RJ45 adaptor cable 1 piece
3. 9V battery 2 pieces 8. Instruction manual 1 piece
4. Earphone 1 piece 9. Toolkit 1 piece
5. RJ11 adaptor cable 1 piece 10. Color box 1 piece

08 Your excellent helper in cable test!


NF-306 NF-868 NF-8208

NF-268 NF-806R NF-816

NF-468L NF-3468 NF8108-M

NF-388 NF-903 NF-906A

Your excellent helper in cable test! 09


Your excellent helper in cable test!

SHENZHEN NOYAFA ELECTRONIC CO.,LTD

You might also like