ZM Ultra Mobile

Technical Specifications

Transducer ZM Ultra Mobile

Measurement principle Ultrasonic transit time (time of flight)
• 2 x rechargeable battery 12V/15 Ah, lead
gel
Power supply
• Charger 100 - 240 V AC / 50 .. 60 Hz / 50
VA
Operating temperature - 20°C … + 50°C
Storage temperature - 20°C … + 70°C
Max. humidity 90 %, non condensing
Display Status LED (RGB)
Solenoid switch, via WLAN using
Operation
Smartphone, Tablet, Notebook…
Number of paths 2
• 2 x 0/4 - 20 mA (active/passive)
• 1 x 0/4 -20 mA (passive)
Inputs • 1 x active digital input
• 1 x connection socket for power adapter or
alternative power supply
• 1 x analog output 0 - 10 V
• 1 x potential-free digital output as SPDT /
Outputs
bistable
• 1 x USB for value readout via USB stick
5 seconds - 60 minutes, time-cyclic or event-
Storage cycle
based
Internal memory, 182.398 measurement
Data memory cycles equal to 1.5 years with measurement
interval of 5 minutes
• USB stick
Data transmission • WLAN
• GPRS / UMTS / LTE

F.A.S.T. GmbH Telefon : 07946 / 921000 Bankverbindung Gerichtsstand: Heilbronn

Kreissparkasse Heilbronn IBAN: DE13 6205 0000 0230 0404 38 BIC: HEISDE66XXX Registergericht: Stuttgart HRB 104629
Bössingerstraße 36 Fax : 07946 / 7153
Volksbank Hohenlohe IBAN: DE68 6209 1800 0113 3000 00 BIC:
Geschäftsführer: Rainer Riehle
74243 Langenbrettach Email : [email protected] GENODES1VHL Hans-Peter Karle
Deutsche Bank Öhringen
Deutschland e IBAN: DE21 6207 0024 0103 3380 00 BIC: DEUTDEDB620 UST-IdNr.: DE 145774666
Internet Commerzbank Heilbronn EORI : DE2570904
: www.fastgmbh.de IBAN: DE33 6204 0060 0317 0362 00 BIC:
COBADEFFXXX
 Clamp On Sensor for filled pipes:
Measurement principle Ultrasonic transit time
Flow velocity (v average) within path ± 0.1
Measurement uncertainty /repeatability
% of measurement value
Accuracy against calibrated device Flow rate ±1,5%
Measurement frequency 1 MHz
Protection IP 68
Storage temperature -30 °C to +80 °C (non-condensing)
Operating temperature -30°C to +80°C
Permissible medium temperature 0°C to +80°C
Cable lengths Max. 100 m between sensor and transmitter
Sensor connection Continuous pre-configured cable
Zero point drift Absolutely stable zero point
Pipe diameter DN 50 - DN 6000
Measurement range -10 m/s to +10 m/s
Minimum detectable flow velocity 0,005 m/s (<5mm/s)
Material Stainless Steel 1.4301 (AISI 304), PEEK
Pipe Instertion Sensors for filled pipes
Measurement principle Ultrasonic transit time
Measurement range -15 m/s to +15 m/s
Pipe diameter DN 100 - DN 2500
Flow velocity (v average) within path ± 0.1
Measurement uncertainty
% of measurement value
Accuracy against calibrated device Flow rate ±1,5%
Measurement frequency 0.9 to 1.2 MHz
Protection IP 68
Operating temperature -20 °C to +50 °C
Storage temperature -30 °C to +70 °C
Operating pressure max. 16 bar
Max. 100 m between sensor and transmitter
Cable lengths
or Adapter Box
Sensor connection Continuous pre-configured cable
Medium-contacting materials Stainless steel 1.4404, carbon
Zero point drift Absolutely stable zero point

F.A.S.T. GmbH Telefon : 07946 / 921000 Bankverbindung Gerichtsstand: Heilbronn

Kreissparkasse Heilbronn IBAN: DE13 6205 0000 0230 0404 38 BIC: HEISDE66XXX Registergericht: Stuttgart HRB 104629
Bössingerstraße 36 Fax : 07946 / 7153
Volksbank Hohenlohe IBAN: DE68 6209 1800 0113 3000 00 BIC:
Geschäftsführer: Rainer Riehle
74243 Langenbrettach Email : [email protected] GENODES1VHL Hans-Peter Karle
Deutsche Bank Öhringen
Deutschland e IBAN: DE21 6207 0024 0103 3380 00 BIC: DEUTDEDB620 UST-IdNr.: DE 145774666
Internet Commerzbank Heilbronn EORI : DE2570904
: www.fastgmbh.de IBAN: DE33 6204 0060 0317 0362 00 BIC:
COBADEFFXXX
Prüfzertifikat
Certificate of inspection
Certificat d´essai

Geräte Typ: NFM-06000000 Serien-Nr.: 1848NFM0381

Unit type: Serial number:
Type d´appareil: Numéro de série capteur:
Software Version: Software version: V 3.42
Baugruppenprüfung* Test Funktionsprüfung* (trocken) Test
Component inspection ok Functional inspection (dry) ok
Essais composants actifs Essais de fonctionnement (à sec)
Gehäuse
Enclosure Ladefunktion
Boîtier Display (visual check)
Afficheur (contrôle visuel)
Basisboard
Main board Kommunikation (Funktionskontrolle)
Carte mère Keyboard (functional check)
Clavier (contrôle de fonctionnement)
LED Infoanzeige Lade -, Betrieb -, Verbindungsstatus. Digitalein-/ausgänge
Info LEDs charching, operation, connection Status Digital in-/outputs
Affichage d´infos LED, état de charge, de fonctionnement et e connexion
Entrées et sorties numériques
Analogein-/ausgänge
Aufbau Steckerplatte
Analogue in-/outputs
Connector plate funktion
Entrées et sorties analogiques
Construction de la plaque de connecteurs
Dichtigkeitstest IP68 Sensoranschluss ( Clamp on ) v
Leak test IP68 Sensor connection v;
C Test d´étanchéité IP68 Connexion capteur v,

Sensor Typ: NIC-CO01007M Serien-Nr.: 1849CO10227

Sensor Type: Serial number sensor:
Type capteur: Software Version: Software vers.: Révision logiciel:

Baugruppenprüfung Sensor Test Funktionsprüfung* Test

Sensor component inspection Functional inspection
ok ok
Essais composants actifs capteur Essais de fonctionnement

Prüfung Steckeranschluss Nullpunkt Abgleich

Plug connection inspection Zero point adjustment
Verifier connector Ajustement du point zéro

Amplituden / Koppelungseffizienz Keramik V-Messung DN 200

Amplitudes / ceramic coupling efficiency Dry run test
Amplitudes/efficacité de couplage des cristaux Test de fonctionnement à sec

Prüfung der Messung / Inspection of measurement / Essai de la mesure

Sollwert l/s Istwert l/s % Abweichung
Set value Actual value % Divergence
Valeur théorique Valeur réelle % Divergence
Q1= 35l/s (=> v = 0,495m/s) 35,0 34,8 -0,57
Q2= 70l/s (=> v = 0,99m/s) 69,9 70,6 1,00
Q3= 140l/s (=> v = 1,98m/s) 140,1 138,4 -1,21
Q4= 35l/s (=> v = 0,495m/s) 35 34,7 -0,86

Referenz / reference: Kalibrierzeichen / Calibration mark Medium Temperature

Krohne MID Type DN 50 (bis / up to 9,5l/s): PTB- 15032- 18 17,0°C
Krohne MID Type DN 100 (bis / up to 49,5l/s): PTB- 15035- 18
Krohne MID Type DN 250 (bis / up to 160,0l/s): PTB- 15033- 18
Abgleich Füllstand / Level Adjustment: 2118101
Messkanal / Measurement channel: B = 0,35m x H = 0,65

Datum / Date /Date: 25.10.2019 Unterschrift / Signature /Signature: