This document provides the mix design details for M20 grade concrete with a maximum aggregate size of 20mm. The target mean strength is 26.60 N/mm2.
The mix proportions by weight are:
- Cement: 380 kg
- Fine Aggregate: 813 kg
- Coarse Aggregate: 1125 kg
The water-cement ratio is 0.40 and the total cement content is 270 kg of OPC with 110 kg of fly ash. The mix has a total density of 2475 kg/m3.
This document provides the mix design details for M20 grade concrete with a maximum aggregate size of 20mm. The target mean strength is 26.60 N/mm2.
The mix proportions by weight are:
- Cement: 380 kg
- Fine Aggregate: 813 kg
- Coarse Aggregate: 1125 kg
The water-cement ratio is 0.40 and the total cement content is 270 kg of OPC with 110 kg of fly ash. The mix has a total density of 2475 kg/m3.
This document provides the mix design details for M20 grade concrete with a maximum aggregate size of 20mm. The target mean strength is 26.60 N/mm2.
The mix proportions by weight are:
- Cement: 380 kg
- Fine Aggregate: 813 kg
- Coarse Aggregate: 1125 kg
The water-cement ratio is 0.40 and the total cement content is 270 kg of OPC with 110 kg of fly ash. The mix has a total density of 2475 kg/m3.
This document provides the mix design details for M20 grade concrete with a maximum aggregate size of 20mm. The target mean strength is 26.60 N/mm2.
The mix proportions by weight are:
- Cement: 380 kg
- Fine Aggregate: 813 kg
- Coarse Aggregate: 1125 kg
The water-cement ratio is 0.40 and the total cement content is 270 kg of OPC with 110 kg of fly ash. The mix has a total density of 2475 kg/m3.
Grade Of Concrete M20 Tremix 20 4 1.65 6.60 Maximum Size Of Aggregate 20 MM Type Of Cement OPC-53 Concrete Mix For PUMP Design Confirms To IS 456:2000 Degree Of Quality Control Good Type Of Exposure Moderate
Design Mix Calculation
Target Mean Strength = ( fck + 1.65 X t )
= ( 20+ 1.65 X 4) = 26.60
1. Cement Content (OPC) = 270 Kg
2. Fly Ash = 110 Kg
Microsilica = 0 Kg GGBS = 0 Kg 3. Water / Cement Ratio = 0.40
4. Free Water Content = 152 Kg ( 380 X 0.40 )
5. Absolute Volume Cement or Cementitious = 0.086 Cum ( 270 / 3.15 X 1.0 / 1000 ) Water = 0.152 Cum ( 152 / 1.0 X 1.0 / 1000 ) Fly Ash = 0.050 Cum ( 110 / 2.2 X 1.0 / 1000 ) M Silica = 0.000 Cum ( 0 / 2.2 X 1.0 / 1000 ) GGBS = 0.000 Cum ( 0 / 2.88 X 1.0 / 1000 ) Admixture = 0.0038 Cum ( 380 / 1.1 X 0.011 X 1.0 / 1000 ) Entrapped air = 0.000 Cum ( 0% of 1 Cum of concrete ) Total Absolute Volume = 0.292 Cum ( 0.086 + 0.152 + 0.050 + 0.000 + 0.000 + 0.0038 + 0.000 ) Volume of All in Aggregate = 0.708 Cum ( 1.0 - 0.292 )
Volume of Coarse Aggregate = 0.404 Cum ( 0.708 X 0.57 )
20 MM = 339 Kg/Cum ( 0.404 X 2.80 X 0.30 X 1000 ) 10 MM = 786 Kg/Cum ( 0.404 X 2.78 X 0.70 X 1000 ) Fine Aggregate = 813 Kg/Cum ( 0.708 X 0.43 X 2.67 X 1000 )
Adjustment For Absorption By Aggregates :
Free Water to be used in 1 cum of Concrete = 152 Kg
Absorption by Coarse Aggregate 20MM = 0.00 Kg ( 339 X 0.0 / 100 ) 10MM = 0.00 Kg ( 786 X 0.0 / 100 ) Absorption by Fine Aggregate = 0.00 Kg ( 813 X 0 / 100 ) Water requir for Absorption of Aggregate = 0.00 Kg ( 0.00 + 0.00 + 0.00 ) Total water to be used including absorbed water = 152 Kg ( 152 + 0.00 ) 20 MM = 339 Kg/Cum ( 339.2 - 0.00 ) 10 MM = 786 Kg/Cum ( 785.9 - 0.00 ) Fine Aggregate = 813 Kg/Cum ( 813.4 - 0.00 )
Admixture ( PCE base ) 1.1 % by weight of cement = 4.180 Kg
Total Density of Fresh Concrete = ( Cementitious + Aggregate + Admixture + Total water ) = 2475 Kg/Cum Mix Proportion by weight
CEMENT FINE AGGREGATE COARSE AGGREGATE
380 813 1125 1 2.14 2.96
Note : Moisture correction on aggregate to be done at Batching Plant before concreting.
