Earthquake Analysis According To BNBC 2020
Earthquake Analysis According To BNBC 2020
Earthquake Analysis According To BNBC 2020
Sa = (2/3) x (ZI/R) x Cs BUT not less than [0.67bZIS] AND (I/R) shall not be greater than 1 TC 0.8
Eq 6.2.35a
Eq 6.2.35b
Eq 6.2.35c
Eq 6.2.35d
FLEXIBLE STRUCTURE
hn 15.24 m
Ab (N-S Direction) 77 sqm
Ab (N-S Direction) 25 sqm
Cw (N-S Direction) 2.3074
Cw (E-W Direction) 2.10905
T (N-S Direction) 0.0622 sec RIGID STRUCTURE
T (E-W Direction) 0.06506 sec RIGID STRUCTURE
Sw-8 Sw-9 Sw-10 Sw-11 Sw-12 Sw-13 Sw-14 Sw-15 Sw-16 Sw-17
Frame
Shear Wall (RC/Masonry)
S 30 1.38
E. DUAL SYSTEMS: INTERMEDIATE MOMENT FRAMES CAPABLE OF RESISTING AT LEAST 25% OF PRESCRIBED SEISMIC FORCES (with
bracing or shear wall)
1. Special steel concentrically 6 2.5 5 NL NL
braced frames
2. Special reinforced concrete 6.5 2.5 5 NL NL
shear walls
3. Ordinary reinforced NL
masonry shear walls
3 3 3 50
4. Ordinary reinforced NL
concrete shear walls 5.5 2.5 4.5
NL
G. STEEL SYSTEMS
Notes:
1. Seismic design category, NL = No height restriction, NP = Not permitted.
Number represents maximum allowable height (m).
2. Dual Systems include buildings which consist of both moment resisting frame
and shear walls (or braced frame) where both systems resist the total design
forces in proportion to their lateral stiffness.
3. See Sec. 10.20 of Chapter 10 of this Part for additional values of R and Cd and
height limits for some other types of steel structures not covered in this Table.
4. Where data specific to a structure type is not available in this Table, reference
may be made to Table 12.2-1 of ASCE 7-05.
Seismic Design
Category D
50
NP
NP
NP
50
50
50
11
50
NP
NP
NP
NL
35
NP
NL
NP
NP
SMIC FORCES (with bracing
NL
NL
NL
NP
11
50
NP
NP
NP
NP