Data sheet

Cisco ASR 920 Series Aggregation Services

Class B Timing Compliance Routers
The Cisco® ASR 920 Series Aggregation Services Class B Timing Compliance Router
is a full-featured converged access platform, positioned as a Carrier Ethernet
aggregation platform for business services or as a CSR/Small Aggregation platform
for the Mobile Backhaul for 5G markets. These 5G ready routers meet ITU G.8273.2
Class B Timing specifications and provides better accuracy using PTP for phase
delivery. These high-throughput, small-form-factor, low-power-consumption routers
are optimized for mobile backhaul and business applications. ASR 920 routers provide
a comprehensive and scalable feature set, supporting both Layer 2 VPN (L2VPN) and
Layer 3 VPN (L3VPN) services in a compact package. They also allow service
providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from
within the access layer.

Product overview
ASR 920 series router offers key Carrier Ethernet features that simplify network operation. You can use them for
premium services with enhanced Service-Level Agreements (SLAs). And an optional service-activation model
supports incremental growth and makes these routers flexible and cost-effective.

Figure 1. ASR 920 Series – Class B timing compliance models

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8
 The new Class B Timing Compliance Cisco ASR 920 Series routers come in a small form factor (1RU) and in the
below configurations:

● Cisco ASR 920-12SZ-A fixed access platform with single AC power supply, twelve 1/10GE SFP interfaces,
Timing (1PPS/10MHz/ToD) interfaces and pluggable GNSS module
● Cisco ASR 920-12SZ-D fixed access platform with dual DC power supplies twelve 1/10GE SFP interfaces,
Timing (1PPS/10MHz/ToD) interfaces and pluggable GNSS module
● Cisco ASR 920-20SZ-M fixed access platform with modular AC/ DC redundant power supplies, twenty GE
SFP interfaces, four GE copper interfaces and 4X10GE SFP+ interfaces and Timing (1PPS/10MHz/ToD)
interfaces

Prominent features
Broadband access
Cisco ASR 920 Class B timing routers support broadband access for delivering “any-play” services (that is, voice,
video, data, and mobility) to thousands of subscribers. Quality of Service (QoS) on these routers can scale up to a
large number of queues per device. This large number of queues, combined with a three-level hierarchical QoS
algorithm, can deliver an enhanced broadband user experience. This full-featured Layer 2 switch and Layer 3
router supports a variety of broadband applications, including IPTV and Video on Demand (VoD), enhancing and
extending the Cisco Evolved Programmable Network (EPN) architecture.

Converged access for mobile applications

Deployed as a converged access platform for mobile backhaul, the ASR 920 router can aggregate multiple base
stations through multiple Ethernet and IP interfaces, and it can use MPLS as a transport for mobile backhaul traffic.
It also provides the Synchronous Ethernet (SyncE) and IEEE-1588 timing services required in today’s converged
access networks. The model (ASR-920-12SZ-A /ASR-920-12SZ-D) has a pluggable GNSS receiver, which can act
as a grandmaster clock for aggregating and backhauling small cell traffic. The router can be deployed in small,
completely sealed cabinets in outside environments, because of its small form factor and its durability in extended
temperature ranges.

Metro Ethernet access

The Cisco ASR 920 router is built to meet service provider requirements for Carrier Ethernet access. It is optimized
for remote access and central offices, for smaller aggregation sites where a full-featured, small-footprint converged
platform is needed. The router offers service flexibility and delivers Layer 2, IP, and MPLS transport for advanced
L2VPN, L3VPN, and multicast services.

Major differentiators
ASR 920 routers help service providers deliver differentiated, cost-effective services such as residential
broadband, mobile, and Metro Ethernet. It also provides all the features required for MEF 3.0 service initiation,
including services such as ELINE, ELAN, ETREE, ACCESS ELINE, TRANSIT ELINE.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8
 Flexible deployment options
ASR 920 routers are designed with a 1RU compact form factor to accommodate deployment in small spaces.
Available with a range of mounting options, these routers can be deployed in space-constrained locations and
cabinets. The extended temperature range supported by ASR 920 router allows them to be deployed in locations
with minimal environmental control. In addition, their small footprint allows service providers to extend the reach of
their Carrier Ethernet networks to more challenging and remote locations.

Power-supply unit
The new class B timing compliant routers support dual redundant fixed power supply module for DC(ASR-920-
12SZ-D) & single fixed power supply module for AC(ASR-920-12SZ-A) PSU with front to back airflow. ASR-920-
20SZ-M supports dual redundant power supply modules with front to back airflow and are field replaceable.

Powered by the Cisco Carrier Ethernet ASIC

Powered by the Cisco Carrier Ethernet Application-Specific Integrated Circuit (ASIC), which was designed
specifically for service providers, ASR 920 routers deliver essential Carrier Ethernet technologies, including
Hierarchical Quality of Service (HQoS), MPLS, and Virtual Private LAN Services (VPLS). This custom and
advanced ASIC design provides uninterrupted line-rate performance while delivering complex services such as
Access Control List (ACL) and HqoS. The Carrier Ethernet ASIC integrates Cisco traffic-management innovation to
deliver intelligent packet-switching and routing operations.

Service enhancement
In ASR 920 routers, each service is assigned enhanced QoS and security attributes. The router provides advanced
per-traffic-class metering and offers bidirectional packet-count and byte-count statistics. The service offering is
enhanced with Operations, Administration, and Maintenance (OAM) functions that include Layer 2 Connectivity
Fault Management (CFM), IP Service-Level Agreements (SLAs) for Layer 3, and MPLS OAM.

Benefits
MPLS in the access layer
Cisco ASR 920 routers extend MPLS into the access layer by allowing service providers to initiate MPLS-based
Layer 2 and Layer 3 VPN services from within the access layer. These routers give service providers the ability to
expand MPLS toward their network edge to gain the advantages of a single unified MPLS control plane across
their networks. They offer full VPLS support, allowing multipoint services definition. For additional flexibility, VPLS
can be deployed as a full mesh or as Hierarchical VPLS (H-VPLS).

Incremental investment model

The Return on Investment (ROI) on an access element is heavily influenced by its location in the network and
proximity to customers. The ability to deploy ASR 920 routers, then activate features later, on demand, delivers
investment protection. This protection allows flexible timing for deploying MPLS and10 Gigabit Ethernet services
and boosting service capacity.

Advanced Service-Level Agreements

Service-aware QoS allows service providers to expand and differentiate their services portfolio with highly
advanced and differentiated SLAs. The HQoS capabilities of ASR 920 routers scale to eight queues per service,
three levels of scheduling, and buffer volumes capable of accommodating today’s most demanding wireline and
wireless applications.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8
 Mobile timing and synchronization services
ASR 920 routers provide the timing services required in a converged access network to support mobile solutions,
including Radio Access Network (RAN) applications. The new Cisco ASR920 Class B timing compliance routers
will support enhanced timing capabilities via the Class B boundary clock ±20ns, which is required for MBH & 5G.
They also support SyncE with Ethernet Synchronization Messaging Channel (ESMC) and Synchronization Status
Messages (SSM) to allow excellent clock-source traceability. In addition, the routers support IEEE-1588, and the
ASR-920-12SZ-A/ASR-920-12SZD models have a pluggable GNSS receiver which can act as a grandmaster clock
for aggregating and backhauling small cell traffic.

Operational efficiency for carrier Ethernet access deployments

Cisco ASR 920 routers feature major enhancements that help service providers simplify and facilitate network
management, for reduced operational costs. With these innovative features, ASR 920 routers can be deployed in a
variety of applications, including business services with 10-Gigabit Ethernet User Network Interface (UNI) and
Ethernet mobile backhaul. The features enhance performance awareness, facilitate troubleshooting, and simplify
service turn-up and restoration. “Dying gasp” for power indicators and four external alarm inputs also detect
changes in remote sites, giving service providers additional tools to manage the health of network elements.

Universal customer premises equipment

With all interfaces built in, this platform is versatile and can address many deployment scenarios, including Gigabit
Ethernet and 10 Gigabit Ethernet deployments. The licensing mechanism in ASR-920-12SZ-A/ASR-920-12SZD
model allows additional 10 Gigabit Ethernet interfaces to be activated as required for a particular deployment, so
service providers can customize the configuration of the device and pay only when their services grow.

Software
Cisco ASR 920 routers are supported in Cisco IOS® XE Software, which is a modular operating system. This
software is designed to provide modular packaging, feature velocity, and powerful resiliency. For more information
on the supported features and software capabilities, see the Cisco IOS XE Software for Cisco ASR 920 Series
Aggregation Services Router data sheet.

Network management
Cisco ASR 920 routers are supported in Cisco Prime™ for EPN architectures. The Cisco Prime end-to-end network
management solution drastically simplifies the design, provisioning, and management of carrier-grade networks. It
is a comprehensive solution that centralizes and automates service design, fulfillment, assurance, and
performance analysis to help service providers and enterprises lower their costs while meeting high customer
expectations.

For the complete list of optics supported on the Cisco ASR920 Series, refer to the following link:
https://www.cisco.com/c/dam/en/us/td/docs/routers/asr920/compatibility/matrix/Optics-Matrix-ASR920.pdf.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8
 Product specifications
Tables 1 through 3 list the product, power, and environmental specifications for the Cisco ASR 920 Class B Timing
Compliance Routers.

Table 1. Cisco ASR 920 Class B timing compliance series system specifications

Description Cisco ASR-920-12SZ-D, Cisco ASR-920-12SZ-A Cisco ASR-920-20SZ-M

Physical specifications Height: 1.73 in., 1 RU Height: 1.72 in., 1 RU
Width: 17.5 in. Width: 17.5 in.
Depth: 10 in. Depth: 10 in.
Weight: Weight:
ASR-920-12SZ-A: 9.5 lb. (4.33 kg) without GNSS and 10.6 lb. (4.85 kg) – including 2 PSU and 8.6 lb.
9.66 lb. (4.38 kg) with GNSS module (3.86kg) without PSU
ASR-920-12SZ-D: 9.5 lb.(4.31 kg) without GNSS and
9.6 lb.(4.36 kg) with GNSS module
Rack mounts ETSI rack mount kit ETSI rack mount kit
19 in. rack mount kit 19 in. rack mount kit
23 in. rack mount kit 23 in. rack mount kit
Power supplies Single AC power supply Or Dual DC Power Supply Modular AC/DC Power Supply
Chassis MTBF at 40ºC 400,000 hours 400,000 hours
operating temperature
Airflow Front-to-back airflow Front-to-back airflow

Table 2. Power specifications

Description Cisco ASR 920 Class B Timing Compliance Routers

Power consumption ASR-920-12SZ-A: Max 240W, Typical: 170W

ASR-920-12SZ-D: Max 240W, Typical: 170W
ASR-920-20SZ-M: Max 150W, Typical: 115W

AC input voltage and frequency ASR-920-12SZ-A Voltage range: 90V AC to 264V AC, nominal 100V to 240V AC
ASR-920-20SZ-M Voltage range: 85V AC to 264V AC, nominal 100V to 240V AC
Frequency range: 47 to 63 Hz, nominal 50 to 60 Hz

DC input voltage ASR-920-12SZ-D Voltage range: -36 to -72 VDC, nominal - -48 VDC/-60VDC
ASR-920-20SZ-M Voltage range: 18 to 32 VDC or - -36 to -72 VDC, nominal: 24 VDC/-48 VDC

Table 3. Environmental specifications

Description Cisco ASR 920 Class B Timing Compliance Routers

Product ID ASR-920-12SZ-D; ASR-920-12SZ-A; ASR-920-20SZ-M

1
Operating Environment -40 to 70ºC, up to 1,000 feet (300m)
-40 to 65ºC, up to 6,000 feet (1800m)
-40 to 55ºC, up to 13,000 feet (4000m)
Relative humidity 5 to 95 percent, noncondensing
Noise2 55 dBA @ 30C for ASR-920-12SZ-D & ASR-920-12SZ-A
60 dBA @ 30C for ASR-920-20SZ-M
87 dBA at highest system performance
Outside Plant For an outside plant installation, it is required that the system be protected against airborne contaminants,
dust, moisture, insects, pests, corrosive gases, polluted air, or other reactive elements present in the outside
air. To achieve this level of protection, it is recommended that the unit be installed in a fully sealed enclosure
Storage environment Temperature: -40 to 70ºC altitude: 15,000 feet (4570m)

Seismic Zone 4
1
During fan fail, the other fans will run at full speeds and system will comply to GR3108 class-2 conditions
2
Measured as per NEBS GR-63 Core

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 8
 Table 4. Safety and compliance

Type Standards
Safety ● UL 60950-1, 2nd edition
● CAN/CSA C22.2 No. 60950-1-07 2nd edition
● IEC 60950-1, 2nd edition
● EN 60950-1, 2nd edition
● AS/NZS 60950.1:2003

Emissions compliance ● 47 CFR Part 15

● KN 32: 2015
● EN 55032:2012/ AC:2013
● EN 55032:2015
● CISPR 32 Edition 2
● EN61000-3-2: 2014
● EN61000-3-3: 2013
● EN 300 386 V1.6.1
● ICES-003 Issue 6: 2016
● V-2/2015.04
● V-3/2015.04
● TCVN 7189: 2009
● CNS13438: 2006

Immunity compliance ● CISPR24: 2010 + A1: 2015

● EN55024: 2010 + A1: 2015
● KN35: 2015
● TCVN 7317: 2003
● EN 300 386 V1.6.1
● EN 61000-6-1: 2007

NEBS1 ● GR-63-CORE
● GR-1089-CORE
● SR-3580 NEBS Level 3
● GR-3108-CORE

ETSI ● ETS/EN 300 119 Part 4

● ETS/EN 300 019 - Storage: Class 1.2, Transportation: Class 2.3, In-Use/Operational: Class 3.2
● ETS/EN 300 753

Network synchronization ● ANSI T1.101

● GR-1244-CORE
● GR-253-CORE
● ITU-T G.703 clause 5
● ITU-T G.703 clause 9
● ITU-T G.781
● ITU-T G.813
● ITU-T G.823
● ITU-T G.824
● ITU-T G.8261/Y.1361
● ITU-T G.8262
● ITU-T G.8264
● IEEE1588-2008

1
Notable exceptions: Fans do not have filters, and all cabling is provided through the front panel

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8
 Ordering information

Table 5. Ordering information

Part Number Description

Cisco ASR 920
ASR-920-12SZ-D Cisco ASR 920 Series - 12 x 1/10GE SFP, DC Model
ASR-920-12SZ-A Cisco ASR920 Series - 12 x 1/10 GE SFP, AC Model
ASR-920-20SZ-M Cisco ASR920 Series - 20GE SFP, 4Cu and 4-10GE: Modular PSU
ASR-920-CM-GNSS Cisco ASR 920 GNSS Pluggable Module
Licenses
ASR920-S-M IOS XE, Metro Access Package
ASR920-S-I IOS XE, Metro IP Access Package
ASR920-S-A IOS XE, Adv Metro IP Access Package
ASR920-1588 ASR 920 IEEE 1588-2008 BC/MC License

ASR920-10G-2-B Cisco ASR 920 Series - 2 ports 10GE license for ClassB ASR920
S-ASR920-10G-2-B Cisco ASR 920 Series - 2 ports 10GE license for ClassB ASR920 (Smart License)
Accessories

For Product ID ASR-920-12SZ-A, ASR-920-12SZ-D

A920-RCKMT-19-HA EIA 19in Rack mount Option for ClassB Cisco ASR 920, AC

A920-RCKMT-19-HD EIA 19in Rack mount Option for ClassB Cisco ASR 920, DC
A920-CBL-BRKT-H Cable Bracket for non ETSI rackmounts for ClassB ASR 920
A920-RCKMT-23-HA EIA 23in Rack mount Option for ClassB Cisco ASR 920, AC

A920-RCKMT-23-HD EIA 23in Rack mount Option for ClassB Cisco ASR 920, DC
A920-RCKMT-ETSI-HA ETSI Rack mount Option for ClassB Cisco ASR 920, AC
A920-RCKMT-ETSI-HD ETSI Rack mount Option for ClassB Cisco ASR 920, DC

A900-CONS-KIT-U ASR 900 USB Console Cabling Kit

A920-WALLMT-H Wall Mount Option for ClassB Cisco ASR 920
For Product ID ASR-920-20SZ-M

A920-RCKMT-ETSI ETSI Rack mount Option for Cisco ASR 920

A920-RCKMT-19 EIA 19in Rack mount Option for Cisco ASR 920
A920-RCKMT-23-H EIA 23in Rack mount Option for Class B Cisco ASR920, modular

A920-CBL-GUIDE Cable Guide

A920-CBL-BRKT Cable Bracket (Non-ETSI)
A920-CBL-BRKT-E Cable Bracket (ETSI)

A900-CONS-KIT-U ASR 900 USB Console Cabling Kit

A900-CONS-KIT-S ASR 900 Serial Console Cabling Kit

Warranty information
Find warranty information on Cisco.com at the Product Warranties page.

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 8
 Cisco and partner services
Cisco offers a wide range of services programs to help accelerate customer success. These innovative services
programs are delivered through a unique combination of people, processes, tools, and partners, promoting high
levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network
operations, and prepare your network for new applications to extend network intelligence and the power of your
business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco
Advanced Services.

Cisco is committed to reducing your total cost of ownership. Cisco offers a portfolio of technical support services to
help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date
system software. The services and support programs described in Table 10 are available as part of the Cisco
Carrier Ethernet Switching Service and Support solution and are available directly from Cisco and through
resellers.

Table 6. Service and support

Advanced Services Features Benefits

Cisco Total Implementation Solutions (TIS), ● Project management ● Supplement existing staff
available directly from Cisco ● Site survey, configuration, and deployment ● Help ensure functions meet needs
Cisco Packaged TIS, available through ● Installation, text, and cutover ● Mitigate risk
resellers
● Training
● Major moves, adds, and changes
● Design review and product staging

Cisco SP Base Support and Service ● 24-hour access to software updates ● Facilitate proactive or expedited problem
Provider-Based Onsite Support, available ● Web access to technical repositories resolution
directly from Cisco ● Lower total cost of ownership by taking
● Telephone support through the Cisco
Cisco Packaged Service Provider-Based Technical Assistance Center (TAC) advantage of Cisco expertise and
Support, available through resellers knowledge
● Advance replacement of hardware parts
● Reduce network downtime

Cisco Capital
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation
and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and
accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware,
software, services and complementary third-party equipment in easy, predictable payments. Learn more.

Printed in USA C78-741006-01 06/19

© 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8