Beckopox Ep 147w 200094 e

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

TECHNICAL DATASHEET Liquid Coating Resins and Additives

BECKOPOX EP 147w
®

TYPE SPECIAL PROPERTIES AND USE


A/F-liquid epoxy resin, water-emulsifiable Non-crystallizing, contains co-reacting emulsifiers.
Primers/coatings on mineral and metallic substrates.
Adhesives and water-washable jointing-compounds for tiles.
FORM OF DELIVERY (f.o.d.)
100 %

PRODUCT DATA SUGGESTED USES AND PROCESSING


Beckopox EP 147w is a non-crystallizing Bisphenol A/F liquid epoxy resin
Determined per batch: containing cross-linkable emulsifiers. Formulations cured with Beckopox EH
613w, EH 623w or EH 659w give hard films with high abrasion resistance,
good corrosion protection and chemical resistance.
Dynamic Viscosity DIN EN ISO 3219
dynamic viscosity [mPa.s] 9000 - 13000 To adjust viscosity a reduction with reactive diluents such as Beckopox EP 075
(100 1/s; 23 °C) is possible.
Beckopox EP 147w can be formulated together with the solid resin
Epoxy-Equivalent VLN 305
dispersions Beckopox EP 384w or EP 385w to improve their hardness
epoxy equivalent [g/mol] 188 - 200
adhesion to porous substrates.
(f.o.d)

Iodine Colour Number DIN 6162


iodine colour number <= 3
MIXING RATIO AND POT LIFE
A blend of
Not continually determined:
100 g Beckopox EP 147w
75 g Beckopox EH 613w/80WA
Dynamic Viscosity DIN EN ISO 3219 125 g deionized water
dynamic viscosity [mPa.s] 7000 - 10000
(100 1/s; 25 °C) has a pot life at 23 °C of approx. 2 hours, which can not be observed through
Density (Liquids) DIN EN ISO 2811-2 a pronounced increase in viscosity, so that it should be used within this time
period. The substrate temperature should not be below 10 °C and the relative
density [g/cm³] 1,17
humidity not above 80 %.
approx.
(20 °C)

Flash Point (Pensky-Martens) DIN EN ISO 2719 STORAGE


flash point [°C] > 100 At temperatures up to 25 °C storage stability packed in original containers
amounts to at least 365 days.

DISTINGUISHING FEATURES
Beckopox EP 147w gives in comparison with Beckopox EP 122w more rapid
curing, harder films with better chemical resistance and corrosion protection.

SAFETY AT WORK AND ENVIRONMENTAL PROTECTION


When handling and processing epoxy resins and hardeners, the rules and
regulations established by local authorities should be observed. A Material
Safety Data Sheet is available on request.

www.allnex.com
6.0/17.07.2013 ( replaces all previous versions )
• Worldwide Contact Info: www.allnex.com •
Disclaimer: Allnex Group companies (“Allnex”) decline any liability with respect to the use made by anyone of the information contained herein. The Notice: Trademarks indicated with the ®, ™ or * are
information contained herein represents Allnex's best knowledge thereon without constituting any express or implied guarantee or warranty of any registered, unregistered or pending trademarks of
kind (including, but not limited to, regarding the accuracy, the completeness or relevance of the data set out herein). Nothing contained herein shall be Allnex Belgium SA or its directly or indirectly affiliated
construed as conferring any license or right under any patent or other intellectual property rights of Allnex or of any third party. The information Allnex Group companies.
relating to the products is given for information purposes only. No guarantee or warranty is provided that the product and/or information is adapted for
any specific use, performance or result and that product and/or information do not infringe any Allnex and/or third party intellectual property rights.
The user should perform its own tests to determine the suitability for a particular purpose. The final choice of use of a product and/or information as
well as the investigation of any possible violation of intellectual property rights of Allnex and/or third parties remains the sole responsibility of the user.
© 2013 Allnex Belgium SA. All Rights Reserved

You might also like