ChipMaster 6000XP Intelligent 48 Pin Universal Programmer

ChipMaster 5200u Universal PC based 48 PIN Programmer Low Cost Personal Programmer

THE MOST POPULAR UNIVERSAL PROGRAMMER ON THE MARKET! OVER 30,000 UNITS SOLD TO-DATE! Features of Chipmaster 6000xp , Our Top of the Line Universal Programmer With The Most Device Support of any Machine on The Market Today
* Printer-port interface with auto-switch power Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter. *Less then 2 seconds per M bit Programming speed for high density flash chip. * No adapter required for DIL chip up to 48-pin * 8-pin universal pin driver and current limit. * Auto-sense/ Self programming with statistical report * Device insertion /continuity check * Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP * Supports Windows 95/98, Windows 2000, windows XP andNT * Automatic EPROM/ Flash ID search * Serialization for Memory/P chip * Memory buffer H/L byte swap * Project file save / load function * User-selectable verify Vcc with one or two-pass verify voltage * Automatic file format detection and conversion * User-changeable programming parameters * Pin swapping table provided for all adapters * Software update via web

Features:
* Programs high-density Flash memory devices at near theoretical minimum programming times. * Standard 48 pin universal pin-drivers come with universal package adapters to support all types of devices in same package with a single adapter. No adapters are needed for DIL devices. Universal adapters ensure rapid algorithm update. Devicespecific adapters are also available for devices above 48 pins that are amounted on DIL48 module. Down to 1.5V low voltage devices are supported directly, thanks to the DAC controlled I/O levels. * Advanced hardware features minimized Bounce rates are guaranteed for all devices including low voltage, critical and second-hand devices. 5% and 10% Vcc verification promises programming reliability. * Supports 10,769 devices from up to 80 IC manufacturers including EPROM, EEPROM and Flash memory, PIC, AVR and other popular microcontrollers and PLDs. * Pin continuity and wrong chip insertion check prevent chips from accident damage. * Over-current and over-voltage protection for programmer hardware. * Software supports Windows 98/Me/NT/2000/XP. noise. Only

IC manufacturers approved algorithms are adopted. High yield

Specifications Socket and pin driver

* 48-pin DIL/ ZIF socket with receptacle for 8-pin to 48-pin 300/

Operator friendly control software combines many powerful functions with ease of use. Project minimizes

600-mil devices. * Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software controllable rises time and current limit protection. * Logic driver supports pull-up/ pull-down or high impedance on all 48 pins with 2.0V-5V level. * Device support Memory : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD, Others: OTP/Flash Micro-controllers

the whole process of device selection, file loading, device configuration setting, operation option, batch file setting etc. to a single step. History of device selection and file loading simplify operation. Batch command combines device operations like program, verify, security into a single command at any sequence. Autostart starts batch command automatically as soon as the chip is detected to be inserted in the socket properly. Serial number can be generated and programmed into devices automatically in anyway customer specified. The correct device type will be suggested according to the actual ID read when a mistake type is selected. With help of the open API user can even change the buffer content from chip to chip. Recognizes file formats and detects large file offset automatically.

Device operations
Read, blank check, device insertion/ contact check, verify, checksum, EPROM ID check, compare, erase chip, function test, program, memory protect, device configuration setting, device search, edit buffer, mass production mode, modify vector, serialization, H/L byte buffer swap, buffer search.

Specifications:
* Device Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory (NOR and NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic. * Socket Adapters Supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, P SOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP, etc. * PC Interface: USB * Optional Accessories: Package Adapter

PLD vector tester

* Accepts JEDEC test vectors up to 48 pins * 2500V/usec. rise time * File format conversion * JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS, Straight Hex and TEKTRONIC Hex, Automatic detection and conversion.

PC system requirements
* Operating system: Windows 95/98, Win 2000, Windows XP or Windows NT * Processor: 386 and above * 8 MB RAM minimum, 32 MB recommended * Hard disk with 16 MB free space * Parallel port with EPP mode * CD ROM driver

Hardware & Electrical Specifications:

Items included: programming unit, DIL48 Module, AC adapter, Program CD-ROM, USB Cable, User's Guide

General
* Power: 100 to 240 VAC, auto-switching * Frequent range : 47 to 63 Hz * Power consumption : 25 W * Operating temperature: 5 to 45 (41 to 113)

* CE & LVD certified * Weight 1.8KG

Portable Hand-Held EPROM/Flash Programmer

Shooter-XP Stand-Alone or Single Socket Portable PC based Copier (usb & serial)

New Product : Based on Shooter-4C and GangPro-8XP . Dimension 7" x 8" x 1.25 " If you need a low cost stand-alone programmer with keypad, LCD Small, Thin, Portable battery or AC input stand alone Copier, can interface with PC windows XP via a USB port. This is an ideal field unit and will program the 12V EPROMs ( for 21 and 25 volt and one master and one slave sockets as shown in picture to the left that can program EPROMs, 87 Series Micros, Serial EEPROMs , PIC micros in socket or ISP, Motorola Micros, ST micros, then consider the Shooter-XP

older parts refer to Shooter-4C or ChipKopier) , as well as most popular Flash Chips 28 and 32 Pin DIP. PLCC and TSOP external adaptors can be used on select devices. High Speed Turbo Programming of Flash Devices !!! Order Code: PROP3C-001

Windows 98/2k/NT/XP Compatible/ Command Line Window Software Easy User Interface for non-technical Persons Serialization Software, Go-No-go software buttons, Macros!! Editor , Set Config bits for Micros, Auto Detect Devices. Choice Socket Platters , No individual Socket Converters Needed!!! Expansion Chassis Allows Up to 3 Additional Platters of 9 Sockets!!

Features
* 2 independent fully isolated 32-pin ZIF sockets, one Master one Slave. * Support Flash, EPROM devices 32 PIN DIP ( PLCC via adaptors) * Program 8 MB Flash chips within 45 seconds and

Serial Port Interface, USB port coming soon ( Free Upgrade) . Full Return Policy, 7 Day Free Trial Backed by Logical's, 25 Year Customer Commitment Program Stand-Alone Programmer has Easy to User software front

* Stand Alone , battery operated , ideal for mobile applications end

Features
DEVICES SUPPORTED EPROMs 12V versions only 27C64 27128 27C128 27256, 27c256, The Shooter-XP is loaded with features not found in comparably 27512, 27C512, 27010, 27C010, 27C020, 27C040, 27C080 and all priced programmers. The unique control interface allows compatible versions of above FLASH EPROM 29C256-29C040 29EE/LE512-29EE/LE020 28F256-28F020A 28SF/VF 040 29F010-29F040 29F001-29F002 39SF/VF512-39SF/VF040 49F512-49BF040 49F/LV001-49F/LV002 inexperienced personnel to quickly produce programmed parts. Up to 30 part selections and command sequences can be stored in the internal memory and activated by a single button. Operation status such as PASS/FAIL is displayed by tri-color LEDs for reach ZIF socket. Part selection, device option settings and desired commands are arranged in a convenient job format in the internal memory. Jobs can be added from the front panel or from a PC using the WinLink Job Setup Wizard. The wizard steps you through the process of setting all parameters necessary to complete the job. Once the job is created, the operator can execute it by pressing a single button on the front panel or pressing and optional remote switch that plugs into the back of the unit. The proprietary SMART-PART feature assures programming compatibility when mixing different manufacturer parts and notifies the user when parts are inserted incorrectly or the Shooter-IIIC is specially designed for FLASH series, integrating powerful hardware and software to perform high quality . It is the best choice to pro-gram FLASH series device. You can also adjust programming pulse width and programming voltage, the same series. The unit operates a very low current using a 12 VDC source, allowing you mobile applications with an auxiliary battery or cigarette lighter adaptor. Very easy to use Windows software enables your secretary to operate it! FEATURES parts are not program compatible . The Shooter-XP supports virtually all 24/28/32-pin EPROM, EEPROM and FLASH devices (3.3V/5V) from major Up a file using the included WinLink PC software. WinLink allows remote control of all functions as well as providing a hex/ascii editor and Job Setup Wizard. You can get an optional gang of 8 module for this unit. The Shooter-XP programmer firmware can be upgraded in the field using WinLink. We provide the upgrades free online. WinLink runs under Win9x/ME/2K/XP/NT. Now also available

program most standard EPROM devices . The unit will allow you to semiconductor manufacturers. therefore enabling you to select different EPROM algorithms from to1 device can be copied from a master device or programmed from

Small, portable, light & usable with batteries


Functions

Stand-Alone FLASH programmer Only one source is needed to copy with. Two operation modes:stand-alone&PC mode Support Windows 95/98/NT/2000/ME/XP 5 Function keys

command line interface for integration with other software tools such as Labview, or any user written front end.

Basic Features
Device support: FLASH/ EEPROM, EPROM, MICRO'S (optional

Verify & check sum Program IC parameters are adjustable such as programming algorithm, Vpp voltage, and impulse width. Connect with PC by USB port to transmit data and execute functions such as : Type/ Read/ Blank Check/ Program/Verify/Erase/ Disk/ Help/ Process/Parameter C parameters are adjustable such as programming algorithm, Vpp voltage, and impulse width.

head) of 4 or 8 devices!!! and 1-4 slave)

Upgradeable to Gang Capacity: 2-5 sockets (one master Socket platters: Software:

DIP,PLCC2832,PLCC3232,PLCC44(8751), TSOP-48 Winlink-2 for Win 9x/ME/2K/XP/NT, Includes Command Line interface @115K/DB9 Interface: RS232 Power: 115/230VAC/ Front panel: 3x4 KEYPAD 2x16 LCD finish SPECIFICATION: MODEL:Shooter-XP Order Code: PROCHK-D32 DESCRIPTION: Modular Programmer for EPROMs, Flash, Micros, ISP INCLUDES: Base Unit with Keypad and LCD, MODG2X-D32 DIP 32 PIN PROGRAMMING STICK, Serial Cable, Software, Power Module, Manuals, One Year Factory warranty and free phone or internet technical support Enclosure: Metal , Steel 18 Gauge . Paint: Powder Coat Gray Input Voltage: DC 12 Volt 900 ma , Car Battery, Backup GelCell External Battery Weight : 3.5 Ib Dimension Controller 8" x 4.5" x 1.25" Programming Stick. 8" x 2.75" x 1.25" PC interface: Serial RS-232 110K baud . 9 PIN RS-232 EIA DIN connector Female Software: Standard : Winlink2 Windows 98/2K/NT/XP compatible. Optional Command line Software Spec: Menu Driven, Serialization, Macros, Programmable buttons, Graphic Chip Status Controller Spec: Keypad 20 Key functions , 20 char LCD display. Expansion port cable. Case: Steel 18 guage / Gray

100W external 12VDC 900ma ( Car Battery Attachment Optional)

File formats supported: Binary and machine code, Intel HEX , Motorola HEX

Options: Additional Programming Sticks, Cable Testing Module, I/O Module, IC testing module, Carry Case, Command Line Software, UV Eraser, 3 Year Warranty ( if interested in any of these options).