0% found this document useful (0 votes)
40 views2 pages

Product Data Sheet: Diesel GF

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

PRODUCT DATA SHEET

GulfSea Diesel GF
Supreme performance, zinc-free and chlorine-free railroad diesel engine oils

Product Description
GulfSea Diesel GF is supreme performance, zinc-free and chlorine-free oil specially designed to provide
excellent engine cleanliness and oil filter life in the modern railroad diesel locomotive engines being
employed in severe service. It is formulated with an additive package endorsed by engine manufacturers’
and meets the requirements of newer diesel locomotive engines of General Electric (GE) and ElectroMotive
Division (EMD) of General Motors. Though the newer engines consume significantly less oil and operate at
higher temperatures, the excellent BN retention property and improved oxidation resistance of GulfSea
Diesel GF provide superior service and facilitate extended drain intervals. It exceeds the performance
requirements of Locomotive Maintenance Officers Association (LMOA) Generation 5 and API CF/CF-2 and
is available in viscosity grade SAE 40.

Features & Benefits

 Exceptional detergency/dispersancy providing excellent engine cleanliness, especially engine top


decks.
 Excellent in-service retention of BN which facilitates extended drain intervals.
 High thermo-oxidative stability protects against sludge formation providing cleaner engines.
 Zinc-free formulation protects silver bearings against corrosion.
 Non-chlorinated additive package helps in reducing used oil disposal costs.

Applications

 Railroad diesel locomotive engines operating under severe conditions and specifying LMOA
Generation 5 quality oils.
 Medium speed two-cycle and four-cycle railroad engines, including newer diesel locomotive
engines of GE and EMD of General Motors.
 Marine and stationary engines for power generation or off-shore drilling requiring zinc-free oils.
 Detroit Diesel 149 series engines operating under severe conditions.
 Stationary engines requiring API CF and CF-2 quality oils.

Due to continual product research and development, the information contain herein is subject to change without notification.
Typical Properties may vary slightly

Page 1 of 2
PRODUCT DATA SHEET
Typical Properties

GulfSea Diesel GF
SAE Grade 40
Meets the following Specifications
LMOA Generation 5 X
API CF, CF-2 X
EMD of General Motors X
GE as Generation 4 Long Life Oils X
Typical Properties
Test Parameters ASTM Method Typical Values
0
Viscosity @ 100 C, cSt D 445 15
Viscosity Index D 2270 100
0
Flash Point, C D 92 246
0
Pour Point, C D 97 -18
BN, mg KOH/g D 2896 17.3
0
Density @ 15 C, Kg/l D 1298 0.903
Sulphated Ash, wt% D 874 1.96
Zinc, ppm ICP < 10 <10
July 2014

Due to continual product research and development, the information contain herein is subject to change without notification.
Typical Properties may vary slightly

Page 2 of 2

You might also like