Trivia PPE Day 2 Instructions: -Select the correct answer from the dropdown list BELOW each of the questions provided. -Before submitting, write down your answers on a sheet of paper in case of slow internet connectivity. Question 1: An Otto cycle has a clearance of 12% and heat added of 1200 kJ. Find the work done. A. B. Cc D. 564 kJ . 653 ks 709 kJ ). 867 KIQuestion 2: An Otto cycle has an initial condition of 102 kPa and 32°C with compression ratio of 8. The maximum temperature of the cycle is 1400°C. Find the mean effective pressure in kPa per kilogram of air. A. 523.54 kPa B. 643.45 kPa C. 764.56 kPa D. 873.45 kPa Choose v Question 3: An Otto cycle has a heat rejected of 400 kJ and work of 600 KJ. Find the cycle efficiency. A. 56% B. 60% C. 63% D. 50% Question 4: Otto cycle has an initial pressure of P, = 1 kg/cm/. If the final pressure P, = 6 kg/cm2, what is the cycle efficiency? A. 40.06% 44.79% B. C. 53.23% : D. 48.45%Question 5: An Otto cycle has a clearance of 12% and heat added of 1200 KJ. Find the work done. A. 564k) B. 653K) C. 709 kJ D. 867k) Question 6: An Otto cycle has a pressure ratio of 10. What is the cycle compression ratio? A. 5.18 B. 6.34 C. 7.34 D. 8.34 Question 7: An Otto cycle has an initial temperature of 30°C and pressure of 100 kPa. The maximum temperature of the cycle is 1400°C with compression ratio of 6. Find the maximum pressure of the cycle. A. 567 kPa B. 2983 kPa C. 3313 kPa D, 3412 kPaQuestion 8: An Otto cycle has a minimum temperature of 27°C and maximum temperature of 2000°C. If heat added during the process is 1100 kJ/kg, find the clearance of the cycle. A. 23.34% B. 7.34% C. 18.23% D. 11.83% Choose v Question 9: One kilogram of air is compressed adiabatically and in steady flow. The compression efficiency is 80% and work done is 295 kJ/kg. Compute heat rejected. A. 212 ki/kg B. OkJ/kg C. 368.75 ki/kg D. 236 ki/kg Question 10: Find the efficiency of Otto cycle having a compression ratio of 7. A. 48.08% B. 50.08% C. 52.08% D. 54.08%Question 11: An Otto cycle has an initial condition of 102 kPa and 32°C with compression ratio of 8. The maximum temperature of the cycle is 1400°C. Find the mean effective pressure in kPa per kilogram of air. A. 524.78 kPa B. 643.45 kPa C. 764.56 kPa D, 873.45 kPa Choose v Question 12: An Otto cycle has a heat rejected of 400 kJ and work of 600 kJ. Find the cycle efficiency. A. 56% B. 60% C. 63% D. 50% Choose v Question 13: An Otto cycle has a compression ratio of 9. Find the pressure ratio during compression. A. 15.67 B. 17.67 C, 19.67 D. 21.67Question 14: A bubble at 10 m depth in a well rises on the water surface. What is the percent increase in volume? A. 45.23% B. 56.34% C. 69.34% D. 96.82% Choose v Question 15: Find the mass of ammonia in a 1 m? vessel having a pressure of 120 kPa and 20°C. A. 0.234 kg B, 0.763 kg C. 0.837 kg D. 0.563 kg Choose v Question 16: A rigid vessel has an initial condition of 80°F and 16 psig. If the vessel is heated until its temperature increases to 300°F, find the final pressure in psig. A. 14.56 B. 98.34 C. 28.50 D. 18.34Question 17: An air tank has an initial condition of 5 m3, 28°C and 120 kPag. After adding air, the tank condition is 60°C and 450 kPag. Find the percentage increase of air in the tank. A. 55.58% B. 125.16% C. 67.23% D. 234.43% Choose v Question 18: Find the density of air at 50°C and 300 kPa. A. 1.244 kg/m? B. 2.345 kg/m? C. 3.24 kg/m D. 1.024 kg/m? Choose v Question 19: Find the volume of CO, at 150 psi and 240°F if mass is 2 |b? A. 1.83 ft? B. 3.585 ft? C. 2.28 ft? D. 5.342 ft?Question 20: Air in a cylinder is compressed until its volume is one-fourth of the initial volume and to triple its temperature. Its pressure becomes A. Double B. Quadruple C. 12 times D. 10 times Choose v Question 21: A 20 m? air reservoir has a pressure of 300 kPa and 100°C. After 20 kg of air was used, find the mass of air left in the tank. A. 32kg B. 34kg C. 36kg D. 38kg Choose vQuestion 22: A tank contains 20 kg of air at 200 kPa (gage) and 23°C. During heating process the temperature of air rises. For safety purposes a technician installed a relief-type valve so that pressure of air inside the tank never exceed 260 kPa (gage). At what air temperature the relief valve will start releasing air? A. 61.94 °C B. 71.94°C C. 81.94°C D. 91.94°C Choose v Question 23: An 80 kg air at 20°C is mixed with 45 kg air at 45°C. Find the temperature after mixing. A. 29.00°C B. 26.34°C C. 28.33°C D. 32.34°C Choose v Question 24: An ideal gas at 40 psig and 80°F is heated in a closed container to 140°F, What is the final pressure? A. 61psia B. 63 psia C. 75 psia D. 45 psiaQuestion 25: A 20 m? ammonia reservoir has a pressure of 300 kPa and 100°C. After 20 kg of ammonia was used, find the mass of air left in the tank. A. 10.72 kg B. 12.89kg C. 36.98 kg D. 80.87 kg Choose v Question 26: An air bubble rises from the bottom of a water storage tank. The temperature at the surface of the bottom of the tank is 77 degrees F rises to the surface where the temperature is 90 degrees F. What is the percent increase in volume of the bubble if the height of water in the tank is 25 feet? The atmospheric pressure is 14.7 psia. A. 80% B. 78% C. 61% D. 52% Choose v Question 27: Air is compressed isothermally from 100 kPa to 250 kPa. If initial volume is 1.5 m3, what is the final volume? A. 0.60 m? B. 0.80 m? C. 0.70 m3 D. 0.90 m3Question 28: Air at 70°F and 14.7 psia is considered standard air. Determine the amount of heat required to raise the temperature of two pounds of air from 50°F to 95°F at constant pressure process. A. 8 Btu B. 17.50 Btu C. 21.60 Btu D. 28.70 Btu Choose v Question 29: During a process of air, the change of internal energy is 200 kJ/kg. Find the change of enthalpy. A. 67.78 ki/kg B, 129.64 ki/kg C. 134.76 ki/kg D. 280.00 ki/kg Choose v Question 30: Air compresses polytropically from 35°C to 500°C. What is the compression ratio? A 4 B. 6 a8 D. 10Question 31: A5 kg air in a tank changes its temperature from 50°C to 250°C. What is the change in entropy kJ/kg-K. A. 1.23 B. 8.34 Cc. 4.23 D, 1.73 Choose v Question 32: Twenty kilograms per second of air compresses isentropically from 30°C ‘to 300°C. Find the work done during the process. A. 3874.5 kW B. 2346.89 kW C. 1856.7 kw D. 4634.96 kw Choose v Question 33: Consider 1 kg of air at 32°C that expanded by a reversible polytropic process with n = 1.25 until the pressure is halved. Determine the heat transfer. Specific heat at constant volume for air is 0.1786 kJ/kg.K. A. 17kJ heat rejected B. 9.41 kJ heat rejected C. 17k) heat added D. 7.05 kJ heat addedQuestion 34: Find the work needed to isothermally compress 200 m3/min of air from 100 kPa to 700 kPa. A. 294kW B. 385 kW C. 456 kW D. 649 kW Choose v Question 35: During a reversible process there are abstracted 317 kJ/s from 1.134 kg/s of a certain gas while the temperature remains constant at 26.7°C. For this gas c, = 2.232 and c, = 1.713 kJ/kg.K. The initial pressure is 586 kPa. Determine the final volume flow rate. A. 1m3/min B, 2m3/min Cc. 3m?/min D. 4m3/min Choose v Question 36: During isothermal process, the heat added is 200 Btu at 60°C. Find the change of entropy. A, 0.214kKI/K B. 0.634 ki/K C. 0.554 Ki/K D. 0.987 ki/KQuestion 37: Twenty kilograms per second of air compresses isentropically from 30°C to 300°C. Find the work done during the process. A. 3874.5 kW B. 2346.89 kW C. 1856.7 kW D. 4634.96 kw Choose v Question 38: Two kilogram of air in a rigid tank changes its temperature from 32°C to 150°C. Find the work done during the process. A. 216 B. 175 Cc. 185 DO Choose v Question 39: A3 m? air tank has an initial pressure of 120 kPa and 35°C. The heat is added until its pressure increases to 250 kPa. Find the heat added during the process. A. 874.55 kJ B. 762.33 kK) C. 976.47 kJ D. 1083.34Question 40: Air is compressed isothermally at 20°C from 100 kPa to 750 kPa. Find the work done during the process. A. 173.75 ki/kg B. 187.45 ki/kg C. 169.43 ki/kg D. 109.34 ki/kg Choose v Question 41: Air at 5 m3 and 120 kPa undergoes an isothermal process until the pressure is 500 kPa. Find the final volume. A. 1.2m3 B. 1.5m? Cc. 18m? D. 2.1m3 Choose v Question 42: The heat transferred to the engine from a furnace is at a rate of 60 MW, compute the thermal efficiency of the heat engine when the rate of waste heat rejection from a nearby reservoir is 45 MW. A. 25.00% B. 50.00% C. 33.33% D, 100%Question 43: Find the efficiency of the Carnot engine operating between 30°C and 300°C. A. 36.23% B. 47.12% C. 56.34% D. 63.23% Choose v Question 44: A Carnot cycle has a maximum temperature of 350°C and minimum temperature of 100°C. If the heat added is 1000 kW, find the horsepower output of the engine. A. 345 B. 456 C. 538 D. 654 Choose v Question 45: A Carnot cycle has an efficiency of 35.52%. If maximum temperature is 300°F, find the minimum temperature. A. 30°F B. 35°F C. 40°F D. 45°FQuestion 46: A Carnot steam cycle has a minimum temperature of 40°C and Heat added of 1000 KJ. If heat rejected is 600 KJ, find the maximum temperature of the cycle. A. 125.56°C B. 198.34°C C. 248.67°C D. 345.34°C Choose v Question 47: A Carnot cycle has a compression ratio of 9. Find the cycle efficiency. A. 38.48% B. 48.48% C. 58.48% D. 68.48% Choose v Question 48: A Carnot cycle operates between 40°C and 300°C. Find the cycle efficiency. A. 54.21% B. 63.45% C. 45.37% D. 76.45%Question 49: A Carnot steam cycle operates between 100°C and 300°C. If heat added is 1000 kW, find the work done by steam. A. 254kW B. 349 kW C. 876 kW D. 987 kw Choose v Question 50: An ideal gas mixture has mass basis of 45% of Helium and 55% of NH3. The volume fraction of Helium is: A. 0.666 B. 0.777 C. 0.888 D. 0,999 Choose v GQ «Page 1 of 1 This form was created inside of AERC. Report Abuse