Scribd
Upload
83 views

Hydraulics Chapter Two Assignment

This document contains a hydraulics chapter two assignment with 7 problems involving calculations related to fluid pressure, buoyancy, fluid flow, and forces on surfaces submerged in fluid. The problems cover topics like calculating pressure at different points in a multi-fluid container, determining parameters of a mercury manometer connecting two water tanks, finding the minimum force to keep a gate closed, comparing load capacity of a boat in fresh vs. salt water, calculating spillage from a rotating water tank, determining the angle of a free water surface in an accelerating tank, and calculating forces on surfaces of an oil-filled pressurized container.

Uploaded by

Abel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

Hydraulics Chapter Two Assignment

This document contains a hydraulics chapter two assignment with 7 problems involving calculations related to fluid pressure, buoyancy, fluid flow, and forces on surfaces submerged in fluid. The problems cover topics like calculating pressure at different points in a multi-fluid container, determining parameters of a mercury manometer connecting two water tanks, finding the minimum force to keep a gate closed, comparing load capacity of a boat in fresh vs. salt water, calculating spillage from a rotating water tank, determining the angle of a free water surface in an accelerating tank, and calculating forces on surfaces of an oil-filled pressurized container.

Uploaded by

Abel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Hydraulics Chapter Two Assignment

Hydraulics Chapter Two Assignment

1. A multi-fluid container is connected to a U-tube. For the given specific gravities and fluid
column heights, calculate the gage pressure at A and the height of a mercury column that would
create the same pressure at A.
Assumptions 1 All the liquids are incompressible.
2 The multi-fluid container is open to the atmosphere.
Properties The specific gravities are given to be 1.26 for glycerin and 0.90 for oil. We take the
3
standard density of water to be ρw =1000 kg/m , and the specific gravity of mercury to be 13.6.

2. Two water tanks are connected to each other through a mercury manometer with inclined tubes.
If the pressure difference between the two tanks is 20 KN/m2 , calculate the parameters a and θ.
Assumptions Both water and mercury are incompressible.
Properties The specific gravity of mercury is given to be 13.6. We take the standard density of
water to be ρw =1000 kg/m3.

1
Hydraulics Chapter Two Assignment

3. A quarter-circular gate with 4m length is hinged about its upper edge controls the flow of water
over the ledge at B where the gate is pressed by a spring. Calculate the minimum spring force
required to keep the gate closed when the water level rises to A at the upper edge of the gate.
Assumptions 1 The hinge is frictionless.
2 The atmospheric pressure acts on both sides of the gate, and thus it can be
ignored in calculations for convenience.
3 The weight of the gate is negligible.
Properties We take the density of water to be 1000 kg/m3 throughout.

4. The volume of the hull of a boat is given to be 150 m3 and has a mass of 8.56 ton. Determine the
amounts of load the boat can carry in a lake and in the sea water. Can this boat carry more load in
the sea or in fresh water? Explain why.
Assumptions 1 The dynamic effects of the waves are disregarded.
2 The buoyancy force in air is negligible.
Properties The density of sea water is given to be 1.03×1000 = 1030 kg/m3. We take the density
of water to be 1000 kg/m3.

2
Hydraulics Chapter Two Assignment

5. An open cylindrical tank 1.2m in diameter and 1.8m deep is filled with water and rotated about
its axis at 60rpm. How much liquid is spilled and how deep is the water at the axis?

6. A water tank is being towed on an uphill road at constant acceleration. Determine the angle the
free surface of water makes with the horizontal .And do the same for the downhill motion.

Assumptions 1 Effects of splashing, breaking, driving over bumps, and climbing hills are assumed
to be secondary, and are not considered.
2 The acceleration remains constant.

7. A container is filled under pressure with an oil of specific gravity 0.65. Its cover plate measuring
4m x 1m is held in position by a force R as shown in the figure. Calculate the force R, magnitude,
direction and line of action of the forces exerted up on the plane surface AB and CD and the
curved surface BC of the tank.

25 Kpa

A G

300
F
5m
3m
R =1m
B E

C D

Submission date:

You might also like