SCORE: 13/35

PRE- TEST IN ELECTRICAL INSTALLATION & MAINTENANCE NC II

QUALIFICATION

COMPLETE NAME: Jose Antonio San Vicente Jr.

QUALIFICATION: Electrical Installation & Maintenance
INSTITUTION: Philippine Academy of Technical Studies (Bataan)

DIRECTION: Pre-test is a form of evaluation that measures your baseline

knowledge of the subject matter or the unit of competency. Pre-test must be
completed before you may be allowed to proceed on the next activity. You just
have to ENCIRCLE the letter of your choice. Please be reminded that pre-test is not
a graded activity.

PART I. MULTIPLE CHOICE QUESTIONS

1. One of these courses is _______ which plays a vital role in our society by making
sure that there are qualified electricians that will cater to our electrical needs
A. electrical maintenance
B. electrical installation and maintenance
C. electrical installation
D. blueprint

2. Must be able to read blueprints, connect wires and plugs, repair circuits,
install wires, place conduits, and repair.
A. Analytical
B. Physically Fit
C. Technical
D. Observant

3. Must be able to understand electronics systems and its attributes.

A. Compassionate
B. Logical
C. Observant
D. Motor Coordination Skills

4. Must be able to analyse electrical installation and maintenance processes.

A. Analytical
B. Physically Fit
C. Patient
D. Technical

5. Must be able to carry and balance heavy materials in electrical installation and
maintenance.
A. Logical
B. Patient
C. Observant
D. Physically Fit
6. Must be able to identify defects and inspect electrical systems.
A. Analytical
B. Physically Fit
C. Observant
D. Motor Coordination Skills

7. Must be able to repair and engage with electrical wirings until they are
ultimately fixed even if it means multiple trials.
A. Patient
B. Physically Fit
C. Analytical
D. Motor Coordination Skills

8. Must have genuine care and understanding towards clients and co-workers in
communicating both in person and in writing.
A. Physically Fit
B. Compassionate
C. Logical
D. Technical

9. Must be able to work on the smallest wires or materials and possess good eye-
hand coordination.
A. Observant
B. Logical
C. Analytical
D. Motor Coordination Skills

10. Must be able to efficiently use both hands in handling wires.

A. Organizational Skills
B. Manual Dexterity
C. Reading Comprehension Skills
D. Good Work Ethics

11. Must be able to produce quality work in an efficient and timely manner.
A. Time Management Skills
B. Good Work Ethics
C. Motor Coordination Skills
D. Reading Comprehension Skills

12. Must be able to read manufacturer’s instructions and understand them in

order to apply to the current project.
A. Time Management Skills
B. Good Work Ethics
C. Reading Comprehension Skills
D. Manual Dexterity
13. Must be able to work in a clean and organized environment to avoid
unexpected errors due to clutters.
A. Organizational Skills
B. Reading Comprehension Skills
C. Time Management Skills
D. Manual Dexterity

14. _______________________ entails the initial act of putting together wirings,

circuits, and other materials in a place that requires the flow of electricity from
the source.
A. Electrical installation
B. Electrical
C. Installation of electrical wirings
D. Installation Maintenance

15. Electrical maintenance - an electrical maintenance involved (1) diagnosing

faults (2) rotation servicing , and (3)_______________________
A. repairing of electrical equipment of a machine
B. repairing wires
C. repairing gadgets
D. repairing machine

16. Importance of E.I.M - Good installation and maintenance is equivalent to ______

A. dangerous
B. harm
C. safety
D. good

17. Proper labelling save money and _____

A. Time
B. Saver
C. Effort
D. Loyal

PART II. TRUE OR FALSE

18. When you arrive to troubleshoot a defective machine you should switch on the
start push button switch
A. True
B. False

19. The cabinet of lightning installation shall have a grounding conductor To

prevent electric shock
A. True
B. False
20. A switch is used in the installation of one lamp controlled by two locations is
three-way.
A. True
B. False

21. Pull down the fuse cut-off of a transmission line before climbing the electrical
pole.
A. True
B. False

22. A device which is used to test short circuit and ground fault of an armature is
a growler.
A. True
B. False

23. It is not advisable to put a copper or jumper wire instead of a fuse since the
circuit cannot be protected in case of overload or short circuit
A. True
B. False

24. A noisy operator of an electric motor is caused by rotor and stator touched each
other
A. True
B. False

25. The capacitor can correct power factor because it can charge electricity
A. True
B. False

26. A device which is used to removes rough edges of the conduit is called a reamer
A. True
B. False

27. A ground conductor in a three-way system shall not be protected by a fuse

since a blown fuse in the ground conductor will make the circuit unbalance
A. True
B. False

28. The standard unit of power is Watt

A. True
B. False

29. A device that automatically cut off the circuit without damage during abnormal
condition is a Circuit Breaker
A. True
B. False
 30. The use of friction tape over the plastic tape is required in every electrical splice
to avoid disconnection
A. True
B. False

PART III. MATCHING TYPE

31.

1 A. Non-Contact Voltage Tester

32.

2 B. Circuit Analyzer

33.

3 C. Electrical Tape

34.

4 D. Pliers

35.

5 E. Screwdrivers

1
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
2
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
3
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
4
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
5
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
ANSWER KEY:

1. B 8. B 15. A 22. A 29. A

2. C 9. D 16. C 23. A 30. A
3. C 10. B 17. A 24. A 31. E
4. A 11. A 18. B 25. A 32. D
5. D 12. C 19. A 26. A 33. C
6. C 13. A 20. A 27. A 34. B
7. A 14. A 21. A 28. A 35. A
 SCORE: __________

PRE- TEST IN ELECTRICAL INSTALLATION & MAINTENANCE NC II

QUALIFICATION

COMPLETE NAME: ___________________________________________________

QUALIFICATION: ___________________________________________________
INSTITUTION: ___________________________________________________

DIRECTION: Pre-test is a form of evaluation that measures your baseline

knowledge of the subject matter or the unit of competency. Pre-test must be
completed before you may be allowed to proceed on the next activity. You just
have to ENCIRCLE the letter of your choice. Please be reminded that pre-test is not
a graded activity.

PART I. MULTIPLE CHOICE QUESTIONS

1. One of these courses is _______which plays a vital role in our society by making
sure that there are qualified electricians that will cater to our electrical needs
A. electrical maintenance
B. electrical installation and maintenance
C. electrical installation
D. blueprint

2. Must be able to read blueprints, connect wires and plugs, repair circuits,
install wires, place conduits, and repair.
A. Analytical
B. Physically Fit
C. Technical
D. Observant

3. Must be able to understand electronics systems and its attributes.

A. Compassionate
B. Logical
C. Observant
D. Motor Coordination Skills

4. Must be able to analyse electrical installation and maintenance processes.

A. Analytical
B. Physically Fit
C. Patient
D. Technical

5. Must be able to carry and balance heavy materials in electrical installation and
maintenance.
A. Logical
B. Patient
C. Observant
D. Physically Fit
6. Must be able to identify defects and inspect electrical systems.
A. Analytical
B. Physically Fit
C. Observant
D. Motor Coordination Skills

7. Must be able to repair and engage with electrical wirings until they are
ultimately fixed even if it means multiple trials.
A. Patient
B. Physically Fit
C. Analytical
D. Motor Coordination Skills

8. Must have genuine care and understanding towards clients and co-workers in
communicating both in person and in writing.
A. Physically Fit
B. Compassionate
C. Logical
D. Technical

9. Must be able to work on the smallest wires or materials and possess good eye-
hand coordination.
A. Observant
B. Logical
C. Analytical
D. Motor Coordination Skills

10. Must be able to efficiently use both hands in handling wires.

A. Organizational Skills
B. Manual Dexterity
C. Reading Comprehension Skills
D. Good Work Ethics

11. Must be able to produce quality work in an efficient and timely manner.
A. Time Management Skills
B. Good Work Ethics
C. Motor Coordination Skills
D. Reading Comprehension Skills

12. Must be able to read manufacturer’s instructions and understand them in

order to apply to the current project.
A. Time Management Skills
B. Good Work Ethics
C. Reading Comprehension Skills
D. Manual Dexterity
13. Must be able to work in a clean and organized environment to avoid
unexpected errors due to clutters.
A. Organizational Skills
B. Reading Comprehension Skills
C. Time Management Skills
D. Manual Dexterity

14. _______________________ entails the initial act of putting together wirings,

circuits, and other materials in a place that requires the flow of electricity from
the source.
A. Electrical installation
B. Electrical
C. Installation of electrical wirings
D. Installation Maintenance

15. Electrical maintenance - an electrical maintenance involved (1) diagnosing

faults (2) rotation servicing , and (3)_______________________
A. repairing of electrical equipment of a machine
B. repairing wires
C. repairing gadgets
D. repairing machine

16. Importance of E.I.M - Good installation and maintenance is equivalent to ______

A. dangerous
B. harm
C. safety
D. good

17. Proper labelling save money and _____

A. Time
B. Saver
C. Effort
D. Loyal

PART II. TRUE OR FALSE

18. When you arrive to troubleshoot a defective machine you should switch on the
start push button switch
A. True
B. False

19. The cabinet of lightning installation shall have a grounding conductor To

prevent electric shock
A. True
B. False
20. A switch is used in the installation of one lamp controlled by two locations is
three-way.
A. True
B. False

21. Pull down the fuse cut-off of a transmission line before climbing the electrical
pole.
A. True
B. False

22. A device which is used to test short circuit and ground fault of an armature is
a growler.
A. True
B. False

23. It is not advisable to put a copper or jumper wire instead of a fuse since the
circuit cannot be protected in case of overload or short circuit
A. True
B. False

24. A noisy operator of an electric motor is caused by rotor and stator touched each
other
A. True
B. False

25. The capacitor can correct power factor because it can charge electricity
A. True
B. False

26. A device which is used to removes rough edges of the conduit is called a reamer
A. True
B. False

27. A ground conductor in a three-way system shall not be protected by a fuse

since a blown fuse in the ground conductor will make the circuit unbalance
A. True
B. False

28. The standard unit of power is Watt

A. True
B. False

29. A device that automatically cut off the circuit without damage during abnormal
condition is a Circuit Breaker
A. True
B. False
 30. The use of friction tape over the plastic tape is required in every electrical splice
to avoid disconnection
A. True
B. False

PART III. MATCHING TYPE

31.

6 A. Non-Contact Voltage Tester

32.

7 B. Circuit Analyzer

33.

8 C. Electrical Tape

34.

9 D. Pliers

35.

10 E. Screwdrivers

6
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
7
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
8
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
9
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
10
https://www.procrewschedule.com/electrical-tools-that-electricians-use-in-their-work/
ANSWER KEY:

1. B 8. B 15. A 22. A 29. A

2. C 9. D 16. C 23. A 30. A
3. C 10. B 17. A 24. A 31. E
4. A 11. A 18. B 25. A 32. D
5. D 12. C 19. A 26. A 33. C
6. C 13. A 20. A 27. A 34. B
7. A 14. A 21. A 28. A 35. A