Oracle.1z0-1035.v2019-10-04.

q40

Exam Code: 1Z0-1035

NEW QUESTION: 1
An inclusion has had certain assets overridden in the destination project. What happens when the
inclusion is updated?
A. Changes made in the destination project are left unchanged, but all other inclusion updates are
applied.
B. An error occurs.
C. Changes in the destination project are overridden to match the updated inclusion.
D. The policy modeler has the choice whether to accept or reject the change.
Answer: B (LEAVE A REPLY)

NEW QUESTION: 2
You have deployed a policy model written in English and want to deploy it in Spanish, so that both
the English and Spanish versions are available to end users.
Which two steps are required?
A. Redeploy the interview using the original URL.
B. Redeploy the interview but give it a new URL in the Deployment dialog box.
C. Write screens in Spanish.
D. Write rules in Spanish.
E. Add a translation file.
Answer: B,C (LEAVE A REPLY)

NEW QUESTION: 3
You have an interview screen that collects the attribute "the person's age in years".
Your customer requires that an error message be displayed if "the person's age in years" is less
than 0 or greater than 120.
Which option satisfies this requirement?
A. Set the minimum and maximum values in the Screen Properties. Set the error message text in
a validation rule.
B. Set the minimum and maximum values on the Interview tab. Set the error message text in a
validation rule.
C. Set the minimum and maximum values, and the error message text, on the Interview tab.
D. Set the minimum and maximum values in validation rules. Set the error message text on the
Project tab.
E. Set the minimum and maximum values, and the error message text, in the Edit Attribute dialog
box.
Answer: (SHOW ANSWER)

NEW QUESTION: 4
Consider the following excerpt from source material for a building permit:
"The City believes that the beauty of its lands is important. Any owner of an existing building that
exceeds three stories within city limits must pay an additional yearly fee. The fee is $100 for every
story in excess of
3."
A rule concludes: An owner must pay an additional yearly fee if______.
Which three options complete the conditions for this rule based on the requirements?
A. the building is an existing building
B. the building is located within city limits
C. the fee = (the number of building stories - 3) * 100
D. the number of building stories > 3
E. the city believes the beauty of its lands is important
Answer: (SHOW ANSWER)

NEW QUESTION: 5
The source material for your policy model says:
To be eligible for the program, there must be at least one child in the family under 18 years of
age. The payment amount for the family is based on the total income of all family members. If a
family member has multiple jobs, include income from all jobs.
Which two steps should you perform?
A. Create three entities: the family member, the family member's age, the family member's job.
B. Create two entities: the family member, the family member's job.
C. Create two entities: the family member, the family member's age.
D. Create three attributes (the first job, the second job, the third job) to allow for family members
with multiple jobs.
E. Create an inferred entity for "the job" to allow for family members with multiple jobs.
F. Use an entity function to calculate a family member's total income from all their jobs.
Answer: (SHOW ANSWER)
NEW QUESTION: 6
You need to implement rules for a mapping table to determine "the region of the applicant" and
"the applicant is from an English-speaking country" based on "the country of the applicant". You
decide to implement it as a rule table in Excel. You defined three Legend Keys on your
Declarations tab, one called Region, one called Country and one called English Speaking. You
want to use the legend text in your rule table.
What text should you enter in the top-left cell of your rule table that is in OPM - Condition Heading
style?
A. Condition
B. English Speaking
C. the country of the applicant = Country
D. the country of the applicant
E. the country of the applicant is English speaking
F. Region
G. Country
H. the region of the applicant = Region
I. the applicant is from an English-speaking country
Answer: E (LEAVE A REPLY)

NEW QUESTION: 7
You have been asked to model the following:
"5. Cats to be registered
(1) The owner of a cat that has reached six months of age must ensure that the cat is registered
with the local government in whose district the cat is ordinarily kept.
Penalty: a fine of $5000.
(2) Subsection (1) does not apply if:
(a) the cat has been kept by the person for less than 14 days; or
(b) the person has been resident in the State for less than 14 days; or (c) the cat belongs to a
class of cats prescribed as exempt from registration." The business has a requirement to obtain
as much detail as possible from the user for other purposes. Using the minimum number of
Boolean attributes, which four input attributes are required to determine if a cat needs to be
registered under Clause 5?
A. the cat belongs to a class of cats prescribed as exempt from registration
B. the date the person started keeping the cat
C. the cat has reached six months of age
D. the penalty amount
E. the person has been resident in the State for less than 14 days
F. the cat has been kept by the person for less than 14 days
G. the cat's date of birth
H. the penalty is $5000
I. the date the person became a resident in the State
Answer: (SHOW ANSWER)

NEW QUESTION: 8
Which four are valid reasons to split an existing Word document containing rules in your Oracle
Policy Modeling project?
A. You want to use the Debugger to test your rules.
B. Two developers need to work simultaneously on different areas of rules that were originally
within the same Word document.
C. You want to mirror updates to the source material that has divided the source of your rules into
two locations.
D. Editing the new documents is easier in Microsoft Word because the original document was
getting too large.
E. You want to exclude part of the original document from the policy model.
F. You want to separate rules with different purposes.
G. You want to define screens to run in Oracle Web Determinations.
H. You want to add comments and footnotes to your rules.
Answer: G (LEAVE A REPLY)

NEW QUESTION: 9
Your policy model contains the following:

You have set the attribute "the child" to use substitution, but the name is not automatically being
substituted into the "under 18" interview question.
Which guideline about choosing attribute text needs to be applied to the policy model for this
substitution to work?
A. Non-Boolean attributes should contain the exact text of any other Non-Boolean attributes for
which substitution is desired.
B. Boolean attributes should be complete grammatical sentences. O B) Non-Boolean attributes
need to start with an article.
C. Boolean attributes should contain the exact text of any Non-Boolean attributes for which
substitution is desired.
D. Boolean attributes should be kept simple but explicit.
Answer: A (LEAVE A REPLY)

NEW QUESTION: 10
Which four are valid reasons to split an existing Word document containing rules in your Oracle
Policy Modeling project?
A. You want to use the Debugger to test your rules.
B. You want to mirror updates to the source material that has divided the source of your rules into
two locations.
C. You want to separate rules with different purposes.
D. Two developers need to work simultaneously on different areas of rules that were originally
within the same Word document.
E. You want to add comments and footnotes to your rules.
F. Editing the new documents is easier in Microsoft Word because the original document was
getting too large.
G. You want to exclude part of the original document from the policy model.
H. You want to define screens to run in Oracle Web Determinations.
Answer: (SHOW ANSWER)

NEW QUESTION: 11
A customer has requested an interview that will create an incident in Service Cloud along with a
number of tasks (linked to the incident). From a data mapping perspective at the entity level, how
can this be achieved with the minimum number of steps?
A. Map the global entity to the Incident object and create an entity for Task object. Map the child
entity to the Task object in Service Cloud.
B. Do not map the global entity. Create entities for both the task and incident objects and map
these to the corresponding objects in Service Cloud.
C. Map the global entity to both the Task and Incident objects, because primary objects can be
mapped to directly.
D. Create a relationship between Tasks and Incidents in Service Cloud, map the global entity to
the Task object and create a child entity for the Incident.
E. Map the global entity to the Task object and create an entity for the Incident object. Map the
child entity to the Incident object in Service Cloud.
Answer: (SHOW ANSWER)

NEW QUESTION: 12
You created a policy model and now want to deploy the current project to the Hub. You also want
to restrict the interview so that it cannot be utilized anonymously by end users.
Which two steps are required to accomplish these two goals?
A. Through Policy Modeling, click Deploy Snapshot and enter your credentials to deploy your
project.
B. Through the Hub, click Deploy New Project and navigate to your project to deploy your project.
C. Through the Hub, click Access Settings and configure which group should be able to access
the interview.
D. Through Policy Modeling, click Mapping Settings and configure which group should be able to
access the interview.
Answer: A,D (LEAVE A REPLY)

NEW QUESTION: 13
You have an entity called "the child". You have three attributes called "the child's score," "the
lowest score of all the children," and "the number of children scoring more than ten." You want to
write two rules to infer the lowest score of all the children and the number of children scoring
more than ten without creating any additional attributes in the child entity.
Which two entity functions do you need to use?
A. InstanceMaximumlf
B. InstanceCountlf
C. InstanceSum
D. InstanceMinimumlf
E. InstanceMaxiraum
F. InstanceSumlf
G. InstanceCount
H. InstanceMinimum
Answer: B,G (LEAVE A REPLY)

NEW QUESTION: 14

Assuming that no relationship text has been manually defined or changed, what type of
relationship is "all instances of the store"?
A. a containment relationship with Global as the target entity
B. a containment relationship with the store as the target entity
C. a reference relationship with the store as the target entity
D. a reference relationship with Global as the target entity
E. a containment relationship with the employee as the target entity
F. a self-referential relationship with the store as both the source and target entity
Answer: D (LEAVE A REPLY)

NEW QUESTION: 15
Which two statements about Policy Automation mobile interviews are correct?
A. OPA Mobile interviews can be used when the mobile device has no internet connection.
B. OPA Mobile applications can be customized using the OPA Mobile SDK.
C. OPA Mobile interviews must be defined and deployed separately from web interviews.
D. OPA Mobile interviews must be downloaded from a special Policy Automation Hub.
E. OPA Mobile applications require iOS devices.
Answer: (SHOW ANSWER)

NEW QUESTION: 16
Which two statements about connectors and grouping operators are correct?
A. The ALL grouping operator may only be used when grouping three or more conditions.
B. Grouping operators reduce ambiguity in rules.
C. The grouping operator sits at the same level as the conditions it is grouping.
D. AND and OR connectors must always be on separate lines to the attributes they are
connecting.
E. A rule may contain AND and OR connectors.
Answer: A,C (LEAVE A REPLY)

Valid 1Z0-1035 Dumps shared by Fast2test.com for Helping Passing 1Z0-1035 Exam!
Fast2test.com now offer the newest 1Z0-1035 exam dumps, the Fast2test.com 1Z0-1035
exam questions have been updated and answers have been corrected get the newest
Fast2test.com 1Z0-1035 dumps with Test Engine here: https://www.fast2test.com/1Z0-1035-
premium-file.html (82 Q&As Dumps, 30%OFF Special Discount: freecram)

NEW QUESTION: 17
Your policy model has an entity of "the product". You want to display all of the names for products
that cost over a certain price on a form. You added the product name field.
Which set of BI publisher features are required?
A. Conditional Region, Conditional Format
B. Conditional Region, Table Wizard
C. Repeating Group, Table Wizard
D. Conditional Region, Repeating Group
E. Repeating Group, Conditional Format
Answer: E (LEAVE A REPLY)

NEW QUESTION: 18
You are creating an online advice tool to help students work out if they may be eligible for a
subsidy on textbooks. Your customer has this requirement for the final interview screen:
* Display the bookstore's address, but only if the student is eligible for the subsidy and the
application date is after 1 January 2017. Which three steps satisfy this requirement?
A. Attach the visibility rule to the screen control containing the bookstore's address.
B. Create a screen label containing the bookstore's address.
C. Attach the visibility rule to the bookstore address attribute in the Data tab.
D. Create a visibility rule concluding "the bookstore's address should be displayed" is true if "the
student is eligible for the subsidy" and "the application date > 2017-01-01".
E. Create an attribute containing the bookstore's address.
F. Attach the attribute "the student is eligible for the subsidy" to the screen control containing the
bookstore's address.
Answer: A (LEAVE A REPLY)

NEW QUESTION: 19
Which two statements comply with the principles for writing Boolean attributes in Policy
Modeling?
A. the applicant has provided proof of their identity and signed the declaration
B. the customer order does not qualify for free shipping
C. the employee is eligible for retirement
D. nobody attended the team meeting
E. the product manufacture date
Answer: B,E (LEAVE A REPLY)

NEW QUESTION: 20
Which two statements are correct for a Policy Automation project team?
A. Policy Automation project teams typically include both technical and nontechnical roles.
B. It is common for the rule author to be the lead tester.
C. It is common for the rule author to create the interview screens.
D. The primary user of Policy Modeling on a project should be the technical developer.
E. Policy Automation projects must have multiple rule authors.
F. Subject matter experts may advise on policy interpretation, but they should not write the Policy
Automation rules.
Answer: (SHOW ANSWER)

NEW QUESTION: 21

In the line covered by the red block, which two grouping operators would allow the rule to compile
without error?
A. "ForAII" in style OPM - level 4
B. "any" in style OPM - level 4
C. "any" in style OPM level 3
D. "all" in style OPM - level 3
E. "all" in style OPM - level 4
F. "ForAII" in style OPM - level 3
G. "both" in style OPM - level 4
H. "both" in style OPM - level 3
Answer: B,D (LEAVE A REPLY)

NEW QUESTION: 22
When creating your rules, you have used the attribute "the gun fired accidentally". When adding
this input to a screen, you notice that the question form of this attribute is "Is the gun fired
accidentally true?".
In which way should you resolve this issue to ensure that the word "true" is not included in any
text shown to the interview user (including explanations)?
A. Remove the word "accidentally" from the attribute text.
B. Add the verb "to fire".
C. Change the question text on the screen.
D. Create a custom attribute text in the Edit Attribute dialog box.
E. Add the verb "to fire" and change the attribute sentence forms in the Edit Attribute dialog box.
Answer: C (LEAVE A REPLY)

NEW QUESTION: 23
You just developed a policy model and need to test a discrete portion of the rules without using
screens.
Identify the correct process.
A. Go to Debug > Data > and set the entity and attribute values that you want to test in the Oracle
Policy Modeling Debugger window.
B. Go to Build > Build and Debug and select Build and Debug without screens in the Oracle
Policy Modeling Testing window.
C. Go to Build > Test Data Model and enter the discrete portion of the rules that you want to test
and assign values.
D. Go to Test > Discrete Data Sets > and set the entity and attribute values that you want to test
in the Rule Testing window.
Answer: A (LEAVE A REPLY)

NEW QUESTION: 24
Which two use cases are suitable for Policy Automation?
A. providing interactive advice on who may be eligible for a product or benefit
B. discovering new policy rules through self-learning predictive analytics on previously collected
data
C. creating a repository for storing and cataloging policy manuals
D. creating an online calculator to determine the amount of a discount or subsidy
E. routing incidents and tasks to appropriate team members
F. managing the security of customer data in another application
Answer: D,E (LEAVE A REPLY)

NEW QUESTION: 25
You are given the following source material.
"The store must comply with the working regulations which are as follows. Employees under the
age of 16 on the date they joined the company must not work more than 20 hours in any week. All
other employees must not work more than 48 hours in any given week, unless they have chosen
to opt out of the Working Time Directive regulations. Note the option to opt out is not available to
employees under the age of 21." You have created a policy model from the above source
material, and have created and used all of the attributes below. Your rules include an entity of
"the employee".
Which four are the minimal set of input attributes?
A. the employee is eligible to opt out of the Working Time Directive regulations
B. the store complies with the working regulations
C. the number of hours the employee has worked in the week
D. the employee has worked more than 48 hours in the week
E. the employee's date of birth
F. the date the employee joined the company
G. the employee has opted out of the Working Time Directive regulations
H. the employee was aged under 16 on the date they joined the company
I. the interview is complete
Answer: B,F,G,H (LEAVE A REPLY)

NEW QUESTION: 26
Which three statements are correct about explanations and audit reports?
A. Explanations can only be added to the final screen in an interview.
B. Audit reports are automatically saved to a data source when one is available.
C. Explanations can be shown on an interview screen, audit reports cannot.
D. Silent and Invisible tags control the information that is shown in an explanation, not in an audit
report.
E. Explanations are automatically saved to a data source when one is available.
F. Explanations can be saved, audit reports cannot.
G. Explanations can be shown in a Form, audit reports cannot.
Answer: A,D,F (LEAVE A REPLY)

NEW QUESTION: 27
Your policy model has two entities: the applicant (Global) and the applicant's income. What type
of relationship does the text "the applicant's primary income" describe?
A. many-to-one
B. self-referential one-to-one
C. one-to-one
D. one-to-many
E. many-to-many
Answer: C (LEAVE A REPLY)

NEW QUESTION: 28
You wrote rules represented conceptually by the following rule diagram:

You build and run your entire set of rules in the Debugger.
Which two methods can you use to test only the subset of five rules represented by the five black
lines connecting the attributes shown as orange circles?
A. Investigate the uppermost orange circle attribute via the data tab and then set values for the
base shown in the decision tab.
B. Set values for the lowermost blue triangle attributes via the data tab and then view the decision
report for the uppermost green square attribute.
C. Set values for the lowermost blue triangle attributes via the data tab and then view the decision
report for the uppermost orange circle attribute.
D. Set values for the lowermost orange circle attributes via the data tab and then view the
decision report for the uppermost orange circle attribute.
E. Investigate the uppermost green square attribute via the data tab and then set values for the
lowermost orange circle attributes in the decision tab.
F. Set values for the lowermost orange circle attributes via the data tab and then view the
decision report for the uppermost green square attribute.
G. Investigate the uppermost orange circle attribute via the data tab and then set values for the
lowermost orange circle attributes via the decision tab.
Answer: (SHOW ANSWER)

NEW QUESTION: 29
Which two statements are true regarding the use of logical connectors in rules?
A. A rule may use both "and" and "or" connectors to link conditions for the same conclusion.
B. The "or" connector increases the number of conditions that must be met for a conclusion to be
satisfied.
C. If a Boolean conclusion uses three conditions joined by "and" connectors, the conclusion is
true if at least one condition is satisfied.
D. The "and" connector may be used at multiple condition levels within the same rule.
Answer: B,D (LEAVE A REPLY)

NEW QUESTION: 30
You are instructed to create a very simple interview with a minimal number of elements. Which
three elements must be included in an interview?
A. at least one screen
B. at least one Submit button
C. at least one stage
C at least one goal
D. at least one entity collect
E. at least one label
Answer: B,C,D (LEAVE A REPLY)

NEW QUESTION: 31

You have removed an entity instance in the Debugger using the Delete instance option shown.
You also want to delete the single entity instance belonging to the relationship "the brands" using
the same method.
Why can't you do this?
A. The entity instance is inferred, and can only be deleted using the Decision tab in the
Debugger.
B. At least one entity instance of the relationship "the brands" must be retained.
C. The entity instance is inferred, and can only be deleted by modifying the rules or attribute
values which caused it to be created.
D. The entity instance can only be removed using the Interview tab in the Debugger.
Answer: D (LEAVE A REPLY)

Valid 1Z0-1035 Dumps shared by Fast2test.com for Helping Passing 1Z0-1035 Exam!
Fast2test.com now offer the newest 1Z0-1035 exam dumps, the Fast2test.com 1Z0-1035
exam questions have been updated and answers have been corrected get the newest
Fast2test.com 1Z0-1035 dumps with Test Engine here: https://www.fast2test.com/1Z0-1035-
premium-file.html (82 Q&As Dumps, 30%OFF Special Discount: freecram)

NEW QUESTION: 32
You are working in a project where you need to develop a rule to calculate the currency attribute
"the person's total taxable income". The person's total taxable income is either the sum of the
attributes "the person's wages" and "the person's interest" or $50,000, whichever is lower.
What rule should you develop?
A)

B)

C)

D)

E)

A. Option D
B. Option A
C. Option C
D. Option E
E. Option B
Answer: D (LEAVE A REPLY)
NEW QUESTION: 33
Which two statements are correct about using Collaboration on a Policy Modeling project?
A. Collaboration improves productivity in a multiuser environment by incorporating and merging
certain changes made by different users.
B. Collaboration reduces the productivity of policy authoring for any project with more than one
person.
C. Collaboration does not allow reuse of a project's assets, because projects stored in the
repository cannot be reused as project inclusions in other policy modeling projects.
D. Collaboration prevents any change from being reverted before upload, thus ensuring only valid
versions are uploaded.
E. Collaboration should be used when there are multiple users working on a project at the same
time, because it avoids conflicts between user changes by immediately being aware of areas that
others are working on.
Answer: B,E (LEAVE A REPLY)

NEW QUESTION: 34
Which three statements about Error rules are true?
A. An Error rule can include substitution (for example, the person's name) in the error text.
B. The conditions on an Error rule could include attributes from more than one entity.
C. An Error rule could prevent the person from answering that they are both male and pregnant.
D. An Error rule could be used to ensure a document has been uploaded.
E. Error rules can only be written in English.
Answer: (SHOW ANSWER)

NEW QUESTION: 35
Which three options will result in an error due to incorrect use of grouping operators?
A)

B)

C)
D)

E)

F)

A. Option D
B. Option B
C. Option A
D. Option C
Answer: A (LEAVE A REPLY)

NEW QUESTION: 36
A student admissions system must capture multiple study preferences for a prospective student.
Each preference includes a preferred campus.
If the student is electing to study at the Sydney campus, then the student should be asked
accommodation questions.
Which condition should you use to conclude that "the student should be asked the
accommodation questions"?
A. ValueAt(the preferences, the preference's campus = "Sydney")
B. Exists(the preferences, the preference's campus = "Sydney")
C. InstanceEquals(the preferences, the preference's campus) = "Sydney"
D. InstanceCount(the preferences, the preference"s campus) = "Sydney"
Answer: B (LEAVE A REPLY)

NEW QUESTION: 37
You are working on a new Policy Automation interview that will load and save data into Service
Cloud You set your Data Mapping Settings to connect to the Service Cloud instance and are
using the Data Output Mapping view in Policy Modeling to create the entities and attributes you
want to work with.
You notice that the field "Name" has a red asterisk next to it.
You must save a value of this attribute into Service Cloud.
A. This attribute must be used as the identifying attribute for the entity.
B. You must collect this attribute.
C. The values for this attribute come from a value list.
D. You must infer this attribute.
E. This field is required by Service Cloud.
F. You must load a value of this attribute from Service Cloud.
G. This attribute is not yet collected on a screen, n G^ You must infer this attribute.
H. This attribute is currently the identifying attribute for the entity.
I. This attribute is not yet collected on a screen.
Answer: E (LEAVE A REPLY)

NEW QUESTION: 38
You have a requirement to identify whether an applicant is eligible for a child support payment. To
be eligible, the applicant must have at least two children of school age. You will collect the details
of each of the person's children to infer whether each child is of school age, and from that infer
whether or not the person is eligible.
Which data model approach supports this requirement?
A. Create an entity container on an interview screen and add name and age attributes for at least
two children.
B. Create an entity called the child under the Global entity with attributes for the child's name and
the child's age with a reference relationship to the global entity.
C. Create attributes for the child's name and the child's age in the Global entity.
D. Create an entity called the child under the Global entity with an attribute for the number of
children of school age.
E. Create an entity called the child with a containment relationship from the Global entity. Create
attributes for the child's name and the child's age in the child entity.
Answer: D (LEAVE A REPLY)

NEW QUESTION: 39
Which action creates a shared version of a project for two policy modelers to work on together?
A. Project tab | Add project to repository
B. Project tab | Open project from Hub
C. Project tab | Upload changes
D. Project tab | Share a copy of this project
E. Project tab | Inclusions | Add
F. Project tab | Deploy snapshot
Answer: F (LEAVE A REPLY)

NEW QUESTION: 40
Which two statements are correct when designing screens?
A. You can specify an input question should be read-only based on the value of another non-
Boolean Value list input on the same interview screen.
B. You can set an input question to appear based on the value of another Boolean input on the
same interview screen.
C. Only attributes with defined names can be used when setting conditional visibility on screens.
D. Input controls can be set to display conditionally using the attribute editor in the Data tab.
E. If an attribute has a static default value defined, this will always override any dynamic default.
F. Boolean attributes can be used to set dynamic default values for date or number fields.
Answer: C,D (LEAVE A REPLY)

Valid 1Z0-1035 Dumps shared by Fast2test.com for Helping Passing 1Z0-1035 Exam!
Fast2test.com now offer the newest 1Z0-1035 exam dumps, the Fast2test.com 1Z0-1035
exam questions have been updated and answers have been corrected get the newest
Fast2test.com 1Z0-1035 dumps with Test Engine here: https://www.fast2test.com/1Z0-1035-
premium-file.html (82 Q&As Dumps, 30%OFF Special Discount: freecram)