Scribd
Upload
248 views1 page

Certificate of Compliance: Certificate's Holder: Dongyang Yige Metal Products Co., Ltd. Certification ECM Mark

Dongyang Yige Metal Products Co., Ltd. has been issued a Certificate of Compliance by Ente Certificazione Macchine Srl for their disposable civilian masks. The masks, models YG001 through YG008 and KN95, were verified to meet the requirements of European standard EN 149:2001+A1:2009. The certificate is valid until April 2025 and allows Dongyang Yige to affix the ECM Certification Mark to their masks, indicating conformity with the relevant European directives.

Uploaded by

Juanito Olazabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
248 views1 page

Certificate of Compliance: Certificate's Holder: Dongyang Yige Metal Products Co., Ltd. Certification ECM Mark

Dongyang Yige Metal Products Co., Ltd. has been issued a Certificate of Compliance by Ente Certificazione Macchine Srl for their disposable civilian masks. The masks, models YG001 through YG008 and KN95, were verified to meet the requirements of European standard EN 149:2001+A1:2009. The certificate is valid until April 2025 and allows Dongyang Yige to affix the ECM Certification Mark to their masks, indicating conformity with the relevant European directives.

Uploaded by

Juanito Olazabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Certificate – Cертификат – 證明書 – Certificat – 증명서 – ‫شهادة‬ Form QAT_10-M04, version 00, effective since March 25th, 2020

Certificate of Compliance
No. 4T200410.DYMTD97

Certificate’s Dongyang Yige Metal Products


Holder: Co., Ltd.
1 shanhu Road Dongyang City.

Certification ECM
Mark: European Type
Conformity Approved

Product: Disposable civilian mask


Model(s): YG001 YG002 YG003 YG004 YG005
YG006 YG007 YG008 KN95

Verification to: Standard:


EN 149:2001+A1:2009

related to CE Directive(s):
R 2016/425 (Personal Protective Equipment)
Remark: This document has been issued on a voluntary basis and upon request of the manufacturer. It is
our opinion that the technical documentation received from the manufacturer is satisfactory for the
requirements of the ECM Certification Mark. The conformity mark above can be affixed on the products
accordingly to the ECM regulation about its release and its use.

Additional information and clarification about the Marking:

The manufacturer is responsible for the CE Marking process, and if necessary, must
refer to a Notified Body. This document has been issued on the basis of the regulation
on ECM Voluntary Mark for the certification of products. RG01_ECM rev.3 available
at: www.entecerma.it

Issuance date: 07 April 2020


Expiry date: 06 April 2025
Reviewer Approver
Technical expert ECM Service Director
Amanda Payne Luca Bedonni

Ente Certificazione Macchine Srl


Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY
 +39 051 6705141  +39 051 6705156  [email protected]  www.entecerma.it

You might also like