Garudadhwaja Structures (P) Ltd. Job Hazard Analysis: JHA No.:05

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

GARUDADHWAJA STRUCTURES(P) LTD.

JOB HAZARD ANALYSIS

Dept./Section CIVIL JHA No.:05

Location of Job Date:-24/09/2021


Job Description Fabrication(Arc Welding) GSPL/JHA/1.2-B/R-00
Team Who has done JHA Safety Supervisor 02
Basic sequence of Job Potential Hazards Safe Guards / Controls to be put in place Responsibility

1.Shifting of materials by Safety: 1. Shoulder pad should be used Safety Supervisor


Manually 1) Heavy load during work ,25 kg for men & 16
kg for women are the maximum
2) Sharp edges of load
lifting capacity to be strictly
3) Bad housekeeping followed.
2. Safety gloves to be worn while
Environment: handling.
NA 3. Good housekeeping is to be
Quality: maintained on worksite.
NA 4. Proper supervision for wrong
Ergonomic:
procedural working.
1.Improper working
posture. 5. Small intervals to be provided
2.Continuation Of work. between work.
Seasonal: 6. Rain coat to be provided to
1.Heavy downpour. workers.
2.Lightening 7. Stop the work & reside inside the
3.High Temperature room.
Occupational Health
8. Drinking water facility & ORS.
Hazard:
1.Musculoskeletal 9. Adequate PPEs usage.
disorder 10. Periodic medical check up

Required PPE Required Required Skill/Training Experienced site in-


Tools/Equipments charge/supervisor
Safety Training before start of job Available
shoe,jacket,helmet,goggles,n Training about the following SOP
ose mask.gloves

Signature of JHA Team Members


GARUDADHWAJA STRUCTURES(P) LTD.
JOB HAZARD ANALYSIS
Dept./Section JHA No.:

Location of Job Date:


Job Description Fabrication
Team Who has done Safety Supervisor
JHA
Basic sequence of Potential Hazards Safe Guards / Controls to be put in place Responsibility
Job
2.Arc Welding Safety: 1.Pre-inspection before start of work & good Safety
1.Faulty wire & loose connection. quality wire to be used. Supervisor
2.Welding fumes ELCB/MCCB to be present in every machine. Welder
3.Fire 2. Good ventilation & proper method during
4.Hot Rejected electrode stubs work.
5.Bad housekeeping 3.Fire Extinguisher/fire blankets to be present
on work site.
6. Welding sparks & splinters
Welding process to be carried in a safe distance
7. UV Radiations from flammable/combustible materials nearby.
Quality: 4.The rejected stubs to be collected and
1.Low grade welding electrodes. discarded in designated metal waste bin.
Environmental: 5.Good housekeeping to be maintained at work
NA site.
Ergonomic: 6.Usage of adequate PPEs (in this case protective
clothing, apron etc )
1.Wrong posture during
7. Welding face shield, welding safety goggles
performing work. usage during welding.
2.Continuous working hours. 8.Only approved standard electrodes with IS
Seasonal: standard to be used during work.
Summer- 9. Training required for the welders about the
1.Humidity & high atmospheric correct working postures & Proper supervision.
temperature. 10.Break to be given to welders during work.
11. Working area to be shedded properly with
Rainy-
well ventilation.
1. Heavy Downpour ORS & drinking water should be available at
2. Lightening work site.
Winter- 12. Welding to be carried on non-conductive &
NA non-flammable sheet underneath.
Occupational Health Hazard: 13.Stop the work & take shelter in designated
1.High exposure to welding process safe place.
14. Welding process to be done on rotation wise
leads to chronic diseases.
& by taking mid breaks during work.
2. Musculoskeletal disorder. 15.Periodic medical check-up.

Required PPE Required Tools/Equipments Required Skill/Training Experienced


site in-charge
Safety shoe, safety Arc Welding Machine Set Standard Operating procedure for arc welding Available
helmet, safety process training to be provided.
apron, safety
goggles, ear
plug ,leather gloves,
gas cutting safety
goggles , Nose mask

Signature of JHA Team Member


GARUDADHWAJA STRUCTURES(P) LTD.
JOB HAZARD ANALYSIS
Dept./Section JHA No.:

Location of Job Date:


Job Description
Team Who has done JHA Safety Supervisor
Basic sequence of Job Potential Hazards Safe Guards / Controls to be put in place Responsibility

3. Dumping of debris Safety: 1. Tool checklist before start of job. Safety Supervisor
1.Faulty Trolley 2.Dust mask to be worn.
2. Dust 3. Proper PPEs to be worn while working.
3. Flying Splinters 4. Proper supervision during work.
Environment: 5. Water to be sprinkled throughout the
Dust process.
Quality: 6. Break to be provided within work.
NA 7. Raincoat/ umbrella to be provided, if
Ergonomic: heavy downpour continues stop the work.
1.Wrong body posture Shelter to be used.
during work. 8. Drinking water facility on work site.
2.Long working hour. 9. Periodic medical check up.
Seasonal:
1. Thunderstorm
2. Continuous Rainfall
3.Humidity
Occupational Health
Hazard:
1.Musculoskeletal
disorder

Required PPE Required Required Skill/Training Experienced site in-


Tools/Equipment charge
Safety shoe, safety helmet , Trolley Training before start of job Available
safety googles, safety gloves. Training about the following SOP
Gum boot, Fluorescent
jacket, Nose mask

Signature of JHA Team Members

You might also like