4 5949683011053161120
4 5949683011053161120
4 5949683011053161120
1
A. Parameters To Be Monitored at Telemedicine centres:
1. Multi Para Monitor
The Multi Para Monitor is required for monitoring the vital signs
including
a. Electrocardiogram (ECG)
b. Heart Rate
c. Pulse Rate
d. Oxygen Saturation (SpO2)
e. Respiratory Rate
f. Temperature
g. Non-Invasive Blood pressure (NIBP)
h. Bilirubin Transcutaneous Estimation (Optional)
2. Electronic Stethoscope
The Electronic Stethoscope is required to monitor the
following
a. Heart Sound
b. Lung Sound
3. Portable Lab Kit
The Portable Lab kit should be capable of carrying out the following
investigations
a. Haemoglobin
b. Blood Glucose
c. Blood Urea
d. Serum Creatinine
e. Total Protein
f. Serum Albumin
g. Bilirubin
4. Other investigations
The other investigations to be carried out at the Telemedicine
Centre are as follows
a. Blood Grouping and Rh typing
b. Peripheral Blood Smear for Malarial Parasite
c. Urine Albumin
d. Urine sugar
e. Ketone
2
B. Equipment and other Hardware Requirements at Telemedicine
centres:
The Telemedicine Equipment System should be an integrated system
comprising the following units:
1. Multi Para Monitor
2. Electronic Stethoscope
3. Portable Lab Kit
4. Computer with accessories
5. Internet connectivity
6. Power backup
Equipment Functioning:
The Equipment for Telemedicine should function as an Integrated
Unit.
The integrated data thus collected shall be stored and transmitted
as SMS/MMS and E-mail for diagnosis and referral by digital
communication through internet
Each Equipment should have computer interface so that data can
be transmitted through internet
Requisites for Each Equipment
The Telemedicine Equipment should be compact and user-
friendly
Service Back-up should be available
Spares/ Accessories and Consumables should be readily available
Portable Lab Kit
The Portable Lab Kit should comprise the following components
assembled as a single unit as a table top model for performing Lab
investigations
a. Portable and Compact Analyser
b. Micropipettes
c. Microtips
d. Centrifuge
e. Incubator
f. Cuvettes
g. Cuvette Stand
3
The Portable Lab Equipment should be an open system which can
use reagents from any manufacturer
Should be capable of providing precise and accurate results
Equipment should have been validated against Gold Standards
and also will be subjected to validation by Government Experts in
Government laboratories
Each Equipment should have its own in-built power back up for
at least 2 hours
External UPS which can support the all equipment and Computer
for at least 4 hours
Server
4
ELCOT may be requested to provide Server, Storage and Co-
location at State Data Centre (SDC)