8mm dia ©125mm c/c radial

0.7m from end of the projection CI man hole

0.60x0.60m 8mm @ 125 c/c Circumferential
8mm dia ©125mm c/c circumfertail —2Nos
Top slab(125)
Top Slab
Projection
r Phenail with
fly proof v ntilator
8mm I @ 125 c/c Radial bars
150 amok
--moss
0.75m length
• 1125
Bel-I- outh
I
Steps©300c/c
150
8 mm 150/c
2000 Vertical irvie& outerface
190C
Top mesh bothways 8 mm 150c/c
10 mm (4. 150 c/c Hoop rings inner
RCCladder
1 Omm0150c/c & outer face
hanch bars 400mm wide
150
G 150
/A\ • ID 150 CC(1:4:8)
Sand filling 7 150 Sand filling
Ld 15Q
2600
Bottom mesh bothways
10 mm 150 c/c
Note:-
SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415 tv dA. On ...and'
, Tr VC.

3. Clear minimum cover

slabs :45MM
side walls :45MM 5 KL GLSR
4. SBC : 10T/SOM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
 10mm dia 150mm C/C Radial CI man hole
0.9m from end of projection 0.60x0.60m
—2Nos
8mm dia © 150 mm C/C Top slab(125)
Phenail with
Top Slab circumferential fly proof v ntilator
Projection 00
150

outh

Steps©300c/c /
150
10 mm 150/c

3000 Vertical inner & outerface

190C Top mesh bothways 8 mm 150c/c

10 mm 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
hunch bars 400mm wide
150 I
— 200
A. • • ••: ".• 150 CC(1:4:8)
Sand filling $150 Sand filling
Ld 0
3600
Bottom mesh bothways
10 mm 150 c/c

Note:- SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs :45MM
side walls :45MM 10 KL GLSR
4. SBC : 10T/SOM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
 10mm @ 150 _ cfcRadial
m
from end of projection CI man holes
0.9'm 2Nos
Top Slab Top slab(150)
Projection 8mm @ 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150
• •
Betl/nouth
9 00

7
G.1 Steps@300c/c
10mm @ 150 c/c 150
A\ Both ways 10 mm @ 150/c
•■•

3000 Vertical4 outerface

•
100
Top mesh bothways 8 mm 150c/c
10 mm @ 150 c/c Hoop rings
RCCIadder
1Omm01 50c/c & outer face
haunch bars 400mm wide
150 it

200
e 1 - 4-8 300
SAND FILLING 300
Ld 00
3600
Bottom mesh bothways
10 mm 150 c/c • 3101143

Note:—
1. Gradeof Concrete :M30 SCHEME :
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side walls : 45MM
4. SEC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
10 KL SUMP
be curtailed at a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW:— Providing Water Supply Scheme
10mm © 150 c c Radial
from end of projection CI man holes
cl 2Nos
Top Slab Top slab(150)
Projection 8mm © 150 c/c
Circumferential
Phenail with
r
fly proof v ntilator
150 EM.

Bell ifnouth
900
G.I Steps©300c/c /
10mm © 150 c/c 150
Both ways 10 mm © 150/c

3000 Verticall`t1:1148c outerface

125C
Top mesh bothways 8 mm 150c/c
10 mm © 150 c/c Hoop rings inner
RCCladder
lOmm0150c/c & outer face
haunch oors 400rnm wide

\
MEOW .• I
t I
200
..•.... , . ' - ' 144:8 , .. •. 300
SAND FILLING 300
Ld 200
3600
Bottom mesh bothways
10 mm 150 c/c

Note:— SCHEME
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slobs : 45MM
side wells : 45MM
4. SBC : 10 .1/SOM
5. All dimensions ore in 'mm' unless specified.
12 KL SUMP
6. The Steel should not be overlopped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed of a given section
8. As per IS 3370, the maximum spacing of
Reinforcement should not exceed 300mm or
thickness If section whichever is less
NW:— Providing Water Supply Scheme
10mm @ 150 c/c Radial
CI man holes
.il#P9 from end of projection 2Nos
Top Slab 1---4411ar a_cm. Phenail with Top slab(150)
8mm @ 150 c/c
Projection
Circumferential 7
fly proof v ntilator
--

150 isommo•II
moos —9 1
• T6o
Bell outh
900
GI 10mm @ 150 c/c
Steps@300c/c__\
150
/A\ Both ways Li— 10 mm © 150/c
4000 VerticalstelY& outerface
115C
4
Top mesh bothways 8 mm 153c/c
10 mm @ 150 c/c Hoop rings inner
RCCIadder
1 Omm491 50c/c & outer race
haunch bars 400mm wide

/
• 200
•
300
SAND FILLING i *..i 30
Ld 200
4600
Bottom mesh bothways
10 mm 150 c/c

Note:— SCHEME :
1. Gradeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415
3. Clear minimum cover
slabs : 45MM
side walls : 45MM
4. SBC : 10 T/SOM
5. M dimensions are in 'rnrri . unless specified.
6. The Steel should not be overlapped
at the junction points
20 KL SUMP
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the maximum spocing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less

I
NW:— Providing Water Supply Scheme
1.--5
,
10mm © •KJ0442adial
from end of projection CI man holes
1 piOeyrn cau- 2Nos
Top Slab Top slab(150)
Projection 8mm © 150 c/c
Circumferential
Phenail with
r
fly proof ventilator
150 imomma
mous!.
■ fr-

outh
900
G.L 12.5 Steps©300c/c
10mm '0 ivra c/c 150
Both ways 10 mm 150/c
4500 Vertica4le& outerface
145C
Top mesh bothways
8 mm 150c/c
10 mm @ 150 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide
150
200
300
SAND FILLING 300
Ld ?00
4600
Bottom mesh bothways
10 mm 150 c/c
P.2-, 4
s1 .3
Note:—
1 Grodeof Concrete :M30
2. Grade of Steel (Tor 40) : Fe415 SCHEME :
3. Clear minimum cover
slobs : 45MM
side walls
4. SBC
: 45MM
: 10 T/SQM
5. All dimensions are in 'mm' unless specified.
30 KL SUMP
6. The Steel should not be overlapped
at the junction points
7. Not more than 1/3rd of the bars should
be curtailed at a given section
8. As per IS 3370, the moximum spacing of
Reinforcement should not exceed 300mm or
thickness of section whichever is less
NW:— Providing Water Supply Scheme MVS -ro PA DrrIANA .01 1 141
- - - -

10mm © 150 c/c Radial

1.35m from end of projection CI man holes
2Nos
Top Slab Top slab(150)
Projection 8mm © 150 c/c
Circumferential r Phenail with
fly proof v ntilator
150

outh
900
G.L Steps©300c/c
10mm © 150 c/c 150
ATI Both ways 10 mm 150/c

5000 Vertical in & outerface

160C
Top mesh bothways 8 mm 150c/c
10 mm © 125 c/c Hoop rings inner
RCCladder
1 Omm01 50c/c & outer face
haunch bars 400mm wide

Mil MEW t- 200

•
• Ad 0 ,.
. . C 1;4:8 * ' • •• 300
SAND FILLING 300

T7
Ld
ili — 5600
0
00 f
Bottom mesh bothways
10 mm 150 c/c /t58
) 4 4)
CONDITIONS
1. Gradeof Concrete :M30 Note:– As per IS 3370, the maximum spacing SCHEME : MVS to PADMANA8HAM
2. Grade of Steel (Tor 40) : Fe415 of Reinforcement should not exceed
3. Clear minimum cover
slobs :45MM 300mm or thickness of section whichever LOCATION:
side walls : 45MM is less
4. All dimensions are in 'mm' unless specified. SBC : 10 T/SQM 04DeztigiN§
5. The Steel should not be overlapped
at the junction points
6. Not more than 1/3rd of the bars should
be curtailed at a given section
40 KL SUMP
8mm dia radially & circumferentially for both directions
12:5 c/c curtail alternate radial bars © 1.75m & again Top dome 125mm thick
curtail alternate bars 0 2.65 m from the edge and continue
the remaining bars
Phenail with
r fly proof ventilat
CI man hole
2Nos)
Top dome UPTO 1M(150 th.)

Abb.
RCCIadder
0
0 40 m wide Ring Beam 200x250
c\J
main steel 4-12mmilr
S 2 L-8 mm -gT @150 c/c
2,5 0
0 outh

Steps©300c/c
—150 Thick Side Wall
900

G.I I 10 mm © 150 c/c

7000
/2C\ 2550 Vertical Outer & Inner face 8 mm 5c/c Hoop rings
inner outer face in
Top mesh bothways staggered fashion
10 mm © 125 c/c 200
150 10mm0150c/c
haunch bors

250
,• 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 7600

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slobs : 45 mm 4\V P TY) viLdcf
sidewalls : 45 mm
85KL SUMP
Beom : 45 mm
4. SBC : 10 t/sqm
5. All dimensions are in 'mm' unless specified PP
6. The steel should not be overlapped of the junction points
-)11 1)
7. Not more than 1/3rd of the bars should be A5113 ‘2A".
curtailed at a given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
0 125 c/c curtail alternate radial bars 0 1.85m & again
curtail alternate bors 0 2.80 m from the edge and continue
Top dome 125mm thick
tt1e remaining bars Phenol' with
r fly proof ventilat
ri:ZinZt• CI man hole
/ LINVJ)

11..1 1.
(I)

ii RCCIadder
400mm wide Ring Beam 200x250
20 ain steel 4-16mmv
*-2 L-8 mmv ©150 c/c
ig
6"D`10 B <73 b-
-...., b V 0

Steps©300c/c
—150 Thick Side Wall
900 \
G.I 1 :0
A\ 10 mm © 150 c/c
2750 Vertical Outer & Inner face 8 mm 7 c c Hoop rings
inner&out r face in staggereu

150
I ncthoac
lornTio
Top mesh bothway-
.46,10 mm © 125 c/.
fashion
200
bars

250
. . ...._ .,:-..,..: - ...,..,•,,,. •-• .- 300 CC(1:4:8)
Sand Filling 300 Sand Filling
mirsou
40d 8100
Bottom mesh bothways
All dimensions are in 'mm'
10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Clear Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
100 KL SUMP
5. All dimensions ore in 'mm' unless specified
\‘)
6. The steel should not be overlapped at the juriction points

7. Not more than 1/3rd of the bars should be 'AND '24.

curtailed at o given section

8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dio radially & circumferentially for both directions
Co 125 c/c curtail alternate radial bars © 2.00m & again
c;irtail .lternate bars 3.00 m from the edge and continue Top dome 125mm thick
the remaining bars Phenail with
F fly proof ventilat
CI man hole
2Nos)

RCCIadder
400mm wide Ring Beam 250x250
25 main steel 4-16mm7
4 66.
2 L-8 mm yr ©150 c/c
.a6i) go. outh

Steps©300c/c
—200 Thick Side Woll
900

G.I 8000
/A\ 10 mm © 200 c/c
2850 Vertical Outer & Inner face 8 mm OOc/c Hoop rings
inner •uter face in stagger
Top mesh bothways fashi.
10 10 mm ( 125 c/c 200
150 allrnm0150c/c
hauncbrs

250
•
!.• 300 CC(1:4:8)
Sand Filling 300 Sand Filling
Ld
40d 8700

All dimensions are in 'mm' Bottom mesh bothways

10 mm 125 c/c

Note:
1.Grade of Concrete:M30
2.Grade of Steel(Tor 40):Fe415
3.Cleor Minimum Cover
slabs : 45 mm
sidewalls : 45 mm
Beam : 45 mm
4. SBC : 10 t/sqm
120 KL SUMP
5. All dimensions are in 'mm' unless specified

6. The steel should not be overlapped at the junction points

7. Not more than 1/3rd of the bars should be

curtailed at a given section 1,1t.v \\1,

7-N4-1N15
8. As per IS 3370, the max. spacing of reinforcement should not

300mm or thickness of section whichever is less.

8mm dia radially & circumferentially for both directions
125 c/c curtail alternate bars 0 2.75m & again
curtail olternate bars 4.1m from the edge and continue
the remaining bars Phenail with
— fly proof ventilator CI man hole
125 2Nos)

Top dome(125)
it
0 Beam 300x300 main steel 4-16mm
tO
co 2 L-8 mm 0150 c/c

300
f
500/
Steps©300c/c
Lal 10 mm © 200 c/c 0 mm © 100
vertical in & outerface Hoop rings
11 000 1 inn erArn r Cl/ 0/F Pipe Line
face in 200 Inlet connections
Top mesh bothways staggered fut
2100 10 mm 125c/c
RCCladder
40mwide duck foot bend

• 250
•;• 300 c.c(1:4:8)

L = 4C,d 200
12000
bottommesh bothways
10 mm 1;1- 125c/c
NOTE :-
1. Grade of concrete : M30
2. Grade of steel(Tor 40) : Fe415
Note:— As per IS 3370, the
3. clear minimum cover maximum spacing of
V\ Acp -MArag ( 1
slabs : 45 mm
reinforcement should not
sidewolls : 45 mm
Beam : 45 mm exceed 300 mm or thickness
4. SBC : 18 t/sqm of section whichever is less P'
5. All dimensions are in 'mm' unless specified
psot eA.Przu-sIgf
1
4.r-A
6. The steel should not be overlapped at the junction points Aos)1 5 2g6\
7. Not more than 1/3rd of the bars should be 200KL SUMP
curtailed of a giien section
8mm dia radially and circumfrential for both
directions 0125mmc/c Curtail alternate
bars@ 2.5 m and again Curtail alterna Phenail with
bars03.75 mts and again from the edge
and continue the remaining bars f fly proof ventilator
CI man hole
2Nos)
Top dome (125 mm)

125 mm thick
Top dome Top beam (bxd) 300x300
main steel 4-16mm
2 L-8 mm@150 c/c
300
Steps©300c/c
500 10 m m 150 c/c inrvand CI D/F pipe line
O u :er face Inlet connections
G.l 10000
/A\ 1 2mm01 25mmc/c
3650 Hoop rings inner& 250mm side wall
outer faces in
Staggered fashion
Top mesh bothways
RCC Ladder duck foot bend
10 mm 125 c/c
15 400 mm wide

250
f 300 CC(1:3:6)

200
10800
Haunch bottom mesh both ways 10mm dia ©125mm c/c
200x200
Note:—
1. Gradeof Concrete :M30 SCHEME : MVS to Kondapuram and other
2. Grade of Steel (Tor 40) : Fe415 habitations
3. Clear minimum cover
slabs : 45MM
side walls
Beam
: 45MM
: 45MM 250 KL SUMP if App/oved
4. SBC : 10 T/SQM
5. All dimensions are in 'mm' unless specified.
6. The Steel should not be overlapped M
at the junction points
7. Not more than 1/3rd of the bars should
1'5 AN :\170611)
be curtailed at a given section
8. As per IS 3370, the maximum spacing of 1/37 C
Reinforcement should not exceed 300mm or
thickness of section whichever is less