Kidder Catalogue

KIDDER
KIDDER
DESIGN TECHNOLOGY & SCIENCE EDUCATION
www.kidder.ca
Cat# 80-5943-00...$4.00
Unit# 3, 39 Glen Camer on Road, Thornhill, ON, Canada, L3T 1P1

Toll Free 1.800.263.3556 • Toll Free Fax 1.800.731.8424
Quick Index
Science & Technology Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 2-32
dragsters, hydraulics, rocketry, gears, structures
Plastic Materials & Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 33-39
heating bending, thermoforming, fabrication tools, acyclic sheets
Resource Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 40-45
science technology books, woodworking books
Clock Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 46-58
movements, dials, numerals, hands
Craft Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 60-69
epoxy, pensets, wood turning, lamp making
Full Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 70-71
C02 Dragster Supplies A...Basswood Body Blanks

The basswood blank has a hole for the cartridge cut out. It is
A 12” x 1.62” x 2.6” (30cm x 4x cm x 7 cm)
Cat# 19-1013 ea . . . . . . .Qty 1 $5.60 2-5 $5.00 6-19 $4.55
2.6”
B...Rear Slicks
These plastic slicks are 1 19/16” in diameter and 5/8” thick
(40mm x 16mm).
Cat# 19-1016 ea . . . . . . . . . . . .Qty 1 49¢ 2-5 40¢ 6-19 37¢
Cat# 19-54-1016 100/pkg . . . . . . . . . . . . . . . . . . . . . .$29.00
1.62
Cat# 19-5426 500/pkg . . . . . . . . . . . . . . . . . . . . . . .$130.00

12”
C...Front Wheels
These plastic wheels are 1 15/16” in diameter and 2/16” thick
(33mm x 5mm)
D Cat# 19-1015 ea . . . . . . . . . . . .Qty 1 35¢ 2-5 32¢ 6-19 29¢
Cat# 19-54-1015 100/pkg . . . . . . . . . . . . . . . . . . . . . .$18.50
Cat# 19-5425 500/pkg . . . . . . . . . . . . . . . . . . . . . . . .$90.00
D...Screw Eyes (allows 1/8” axle as well)

Guide your fishing line through the screw eyes which are
B placed on the bottom of the car.
Cat# 19-1024 25/ pkg . . . . . . . . . . . . . . . . . . . . . . . . . .$3.95
Cat# 19-54-1024 100/pkg . . . . . . . . . . . . . . . . . . . . . . .$8.00
E...Washers (allows 1/8” axle to fit through it)

Use these washers on axle to hold the wheel in place.
Cat# 19-1021 10/pkg . . . . . . . . . . . . . . . . . . . . . . . . . . . .80¢
Cat# 19-54-1021 200/pkg . . . . . . . . . . . . . . . . . . . . . .$11.00
Actual
Size F...Axles
C E These axles are 2.5” x 1/8 (63mm x 3mm)
Cat# 19-1023 2/pkg . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27¢
Cat# 19-54-1023 100/pkg . . . . . . . . . . . . . . . . . . . . . .$10.00
2.5” F G
G...12” Axles 1/8” diam (can be cut to length)
12” Cat# 19-1028 12” 6/pkg . . . . . . . . . . . . . . . . . . . . . . . . .$4.00
H...Straws 8” length for 1/8” axle

Run the axle through these straws to use as a bearing.
Cat# 19-1022 10/pkg . . . . . . . . . . . . . . . . . . . . . . . . . . . .45¢
Cat# 19-54-1022 50/pkg . . . . . . . . . . . . . . . . . . . . . . . . . .90¢
H
I...CO2 Cartridges 8gm (18mm diam)
I Cat# 19-1018ea . . . . . . . . . . . . .Qty 1 89¢ 2-5 83¢ 6-19 76¢
Cat# 19-54-1018 100/pkg . . . . . . . . . . . . . . . . . . . . . .$63.00
Cat# 19-5429 250/pkg . . . . . . . . . . . . . . . . . . . . . . . .$150.00
2 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Prices are subject to change without notice.
Dragster 50 Student Class Pak Co2 Hotshot Launcher
This unit is very portable (11 3/4” x
10” plate). It does not have any
dangerous exposed springs or
tension hammer. It is supplied with a
fishing line. It is the most durable
launcher available.
Cat# 19-1005-KE 2-Lane . .$498.00

Cat# 19-1004-KE 1-LANE .$297.00
Replacement Pins
Cat# 19-1005PIN...$54.50 ea
Dragster Class Pack Parts List Cat# 19-5420
Fishing Line 100m Spool
100 x Rear Racing Wheels Cat# 19-1016 Cat# 19-1005FLN.....$2.25
100 x Front Dragster Wheels Cat# 19-1015
100 x CO2 Cartridges . . . . . Cat# 19-1018
50 x Steel Axles 2/pkg . . . . Cat# 19-1023 Dragster Decals
20 x Brass Washers 10/pkg Cat# 19-1021 Dry Transfer Decals are the fastest and easiest way to customize a derby racer. Colorful stripes, flames, numbers, and
5 x Straws 10/pkg . . . . . . Cat# 19-1022 graphics apply easily in seconds. They are high-quality rub-on decals that can be applied around contours and over
50 x 12” Basswood Blanks Cat# 19-1013 textures. With Dry Transfer Decals there is no clear film around the edges of decals. (Size 4" x 5" )
4 x Screw Eyes 25/pkg . . Cat# 19-1024 $7.50 EA
1 x Idea Sheet . . . . . . . . . Cat# 80-5766
Cat.# 19-5420 $350.00
(with Basswood Blanks) Includes 2
cartridges per
Cat.# 19-5422 $145.00 student.
(without Basswood Blanks)
Single Dragster Kits
This kit includes everything you need to
make one dragster.
Nascar Custom Design Hot Rod
Kit includes Stripes & Flames
Cat# 19-P317 Cat# 19-P318 Cat# 19-P314 Cat# 19-P307
basswood blank,
wheels, axles.
washers and Co2
cartridge. Dragster Assembly
QTY $ EACH Front Wheels
1 $9.30 #19-1015
2-5 $8.60
6-UP $8.10
Rear Wheels y
Bod
#19-1016 Car 013
1 9 - 1
#
Cat.# 19-1010
Co2 Dragster Module Screw Eyes
#19-1024 Bearings (Straws)
This is a proven learning package which #19-1022
has been re-worked to add a new CO2 Cartridge
Washers
#19-1018
wrinkle or two to this age-old favorite. #19-1021
Students will design, build, test, and

modify C02 car designs. New testing
and racing tips include fluid-mapping
and rain gutter racing. Axles
#19-1023
Cat.#80-5736 $57.50
Ohaus Scale 120A Sandpaper Start Pin Assembly

NEW • Repeatability: 200/ 0.1g To make your own launcher!
• Linearity: 200g scale +/-
0.1g. Cat.# 19-1006
• Power requirements: 3-AA or
AC adapter.
$31.05ea
• Display: LCD (11cm/ 0.4") *
Pan size (L x W): 14.5 x Cat.# 19-1006-RP
13.3cm/ 5.75 x 5.25"
• Dimensions (L x W x H): 20.5
Replacement Pins
x 14.0 x 3.8cm (8 x 5.5 x 1.5”) $10.90
Cat# 80-2817-03 50/pkg..$21.00
Cat# 98-1260-00 ...$159.00
Toll Free 1.800.263.3556 • Toll Free Fax 1.800.731.8424 • [email protected]
Prices are subject to change without notice. 3
Co2 Eliminator Dragster Launcher & Co2 Eliminator Parts
This 2-lane race car system uses compressed air instead of Co2 cartridges.
Advantages:
A Co2 Eliminator
• no wasted cartridges-students can
repeatedly test during design, Class Pack
modification & finishing stages.
8” x 1.5” x 2.75”
for 10 Students
• construct smaller cars- use less
wood for vehicle design because
Cat.# 19-5435 $58.00
B C
there is no need for room for
H cartridge.
• use standard wheels
CAT.# 19-1505 E
2 LANE SYSTEM $421.00 • more vehicle shapes are possible
D I
Fig Cat# Description Qty1 . 2-5. 6-19 20-49 50+.
A 19-1513-00 Basswood 8” x 1.5” x 2.75” $4.45 $4.25 $3.95 $3.80 $3.70
B 19-1523-00 Axles 2” x 1/8”2/Pkg $0.15 $0.14 $0.13 $ .12 $ .10 Kit includes 20 front wheels, 20 rear
C 19-1015-00 Front Wheel ea $0.35 $0.32 $0.29 $ .23 $0.19 slicks, 40 washers, 20 axles, 10
D 19-1016-00 Rear Wheel ea $0.49 $0.40 $ .37 $ .33 $ .29 G blanks, 8 straws, 20 screw eyes.
E 19-1021-00 Brass Washers 10/Pkg $0.80 $0.75 $0.70 $ .60 $ .55
F 19-1024-00 Screw Eyes 1/4” 25/Pkg $3.95 $3.30 $2.95 $2.60 $2.35 As above
G 19-1022-00 Straws 10/Pkg (axle bearing) $0.45 $0.30 $0.29 $0.27 $ .26 without wood blanks.
H
I
19-1505-00
19-5435-00
Eliminator Drag Launcher
10 Class Pak with Wood
$421.00
$58.00
00
00 F CAT.# 19-5436 $17.90
J 19-5436-00 10 Class Pak no Wood $17.90
What is the F1 in Schools

F1 BASIC CAR KIT
CAD/CAM Design Challenge? Cat #19-7010
F1 IN SCHOOLS is a unique technology If you want to give more of your students
the opportunity to design, make, and test,
challenge that involves the construction of a
then the F1 Basic Car Kit is what you need.
1/20th-scale CO2 Formula One (F1) racing car
The kit includes one F1 balsa wood blank,
out of balsa wood using Computer Aided Design
four wheels, one CO2 cartridge, axles,
and Manufacturing technologies and a CNC screw eyes, and washers.
router. This standards-based challenge seeks to
raise the profile of engineering among young QTY 1..$14.60 2-5...$13.25
people and give them access to the latest 6-UP....$11.95
technology in the engineering and
manufacturing world. (www.f1in schools.ca)
A...F1 BALSA BODY BLANK

Bulk A
G...STANDARD SCREW EYES 200/pkg $11.00
Cat #19-7013 Cat# 19-54-1021
25/pkg
The official blank for creating F1 cars measures 223 mm x 65 mm x Cat #19-1024
50mm and contains a pre-drilled hole for the CO2 cartridge. Use screw eyes keep dragsters on the track with monofilament line.
QTY 1..$5.05 2-5...$4.60 6-UP....$4.20 (Finish Line)
QTY 1..$3.95 2-5....$3.30 6-19.....$2.95 20-UP...$2.60
B...8 GRAM CO2 CARTRIDGES Bulk
Bulk
100/pkg $9.00
Cat # 19-1018 100 pcs $63.00 See launcher information on page 3 Cat# 19-54-1024)
Cat# 19-54-1018
The safest, most reliable, and most Cat# 19-1005-KE
consistent cartridge.
QTY 1...89¢ 2-5....83¢ 6-19..76¢ 20-49...70¢ 50-UP...66¢
C... F1 ALUMINUM AXLES B C D

Cat #19-7027
Bulk
3mm x 152 mm (1/8” x 6”) aluminum axles 25/pkg $17.80
can be cut to custom make 2 axles. Standard Cat# 19-54-7027
with kit
QTY 1..$1.40 2-5....$1.23 6-19.....$1.14 20-UP...$1.05
D...F1 FUSION BLACK TIRE Bulk

Cat #19-7016 100/pkg $32.00
Cat# 19-54-7016
32mm diameter slick tire. Fits 1/8” axle.
QTY 1..80¢ 2-5...60¢ 6-19...40¢ 20-49..36¢ 50-up..33¢
E...PLASTIC STRAWS
Cat #19-54-1022 50/pkg F
For use as axle bushings. 3 mm x 203mm (1/8” x 8”).
E G
QTY 1..90¢
F...WASHERS 10/pkg
Cat #19-1021
Washers reduce friction between the wheel and the dragster body. 3
mm (1/8”) diam hole.
QTY 1..80¢ 2-5...75¢ 6-up 70¢

Worm Gear Car Air Motor Car Class Pack
The motor attaches to a worm gear
which moves the gear on the axle. The propeller attaches to the motor
(High torque design) shaft to move the car along.
Single Kits (Packaged) Single Kits (Packaged)

80-5462-SK.....$12.75 80-5465-SK.....$9.95
24 Student Class Pack 24 Student Class Pack

80-5462-00....$250.00 80-5465-00....$205.00
This kit includes all the pieces to build This kit includes all the pieces to build
24 cars (excluding battery. See 9V Pg 14) BULK 24 cars (excluding battery. See 9V Pg 14) BULK
Motor Car Class Pack Solar Car Class Pack NEW

The motor pulley uses a band This new solar car kit works well in
around a pulley on the wheel bright sunlight and demonstrates the
axle to propel this car. science of solar energy.
80-5435-SK.....$10.95 80-5438-SK.....$23.00
30 Student Class Pack

80-5435....$265.00
80-5438-00....$265.00
This kit includes all the pieces to build
This kit includes all the pieces to build
30 cars (excluding battery. See 9V Pg 14)
BULK 12 cars BULK
Electric Car Kits Class Pack NEW Elastic Car Design NEW
This simple value packed kit You wind the elastic band around the
explores movement, electricity and axle to propel this car.
forces. All parts and instructions are
Single Kits (Packaged)
included in the kit. Battery included.
80-5429-SK...$4.20
80-5433-SK...$12.95 Front Section

80-5433-00...$226.00 50 Student Class Pack
This kit includes all the pieces to build 80-5429-00...$135.00
Rear Section
24 cars (Including battery). This kit includes all the pieces to
BU L K build 50 cars
NEW NEW
Scarab Scissor Kits Hand Generator Kit
Single Kits Just wind the motor and watch the
(Packaged) light bulb illuminate.
83-5424-SK $3.75 Single Kits (Packaged)
80-5434-SK...$21.95
This new kit is an excellent resource to

teach elementary students levers.
83-5424-00....$80.00 20 Student Class Pack
This kit includes all the pieces to build 80-5434-00....$395.00
25 cars This kit includes all the pieces to build
BULK 20 hand generators.
Mousetrap Car Kits Mousetrap Car Kits for Distance
What is friction and how can it be managed? How is energy stored? How is Cat#19-5444 36 Student Class Pack
speed calculated? These questions will be answered with these racers. Use $255.00
them as a “hands on” supplement to teach power and transportation. Kit Includes
72 x Front Wheels . . . . . . . . . . . . .Cat# 19-1015
4 x Straws . . . . . . . . . . . . . . . . .Cat# 19-1022LRG
1 x Bulk Mousetraps . . . . . . . . . .Cat# 19-20-541
1 x Mouse Car Challenge . . . . . .Cat# 80-5754
12 x Washers . . . . . . . . . . . . . . . .Cat#19-20-558
72 x CD’s . . . . . . . . . . . . . . . . . . .Cat#83-1238
1 x String . . . . . . . . . . . . . . . . . . .Cat# 19-20-548
4 x Brass Eyelets . . . . . . . . . . . .Cat# 19-20-553
3 x Balloons (traction) . . . . . . . . .Cat# 19-2025
Individual Kits 19-5444-SK..$9.75

SPECIAL
12 Student Bulk Wheels & Axles
Class Pack
Super Wheels
$115.00 Cat.# 19-54-1015..$18.50 Multi-purpose
100 pcs Front Wheels reusable tires made
Cat.#19-20-543 1 5/16 Diam (34 mm) from a large red
Laser Cut to fit 1/8” diam axles (see plastic pulleys and
Class Pack Parts below) 10/pkg rubber rings.
Kit Includes Available in
• mousetraps (power supply) Qty $/kit packages of 10.
• laser cut chassis & body parts INDIVIDUAL KITS 1/8”
1 $11.75
• laser cut plywood wheels WOOD Cat# 83-54-1248 (50mm) . . . . . . . . . . . . . $8.00
• rubber bands (tire treads) 2-5 $10.60
DOWEL Cat# 83-54-1246 (38mm) . . . . . . . . . . . . . $7.50
• dowels (axles)
• string (transmission)
6-19 $10.10 Cat# 19-20-542 Cat# 83-54-1244 (25mm) . . . . . . . . . . . . . $7.00
• brass eyelets (axle bearings)

20+ $8.70 $11.75ea Cat # 83-2002-04...$2.60 pkg
1/8” dowel 24” 8/pkg All with 4mm diameter axle hole.
PLUS 12 instruction sheets
Bulk Mousetraps CD Washer/Spacer Nylon String

This very strong nylon string is excellent
These rubber washers fill in the centre
Individual Mousetraps for use in mousetrap racing
hole on a CD. They are sold 6/pkg.
Cat.# 19-20-541 36/pkg 36 pcs of
QTY $ /PKG
1 $2.70 36” lengths
QTY $/PKG
2-5 $2.50 $7.20/pkg
1 $30.90
2-5 $28.10 6-UP $2.25
6-UP $25.95
Cat.# 19-20-558 6/pkg Cat.# 19-20-548
Doc Fizzix Mousetrap TEACHING WITH Metal Eyelets Screw Eye Axle Holders
Racers Book MOUSETRAPS Use these eyelets as wheel bearings. Screw eyes are used to hold axles in place. Build
a wooden frame, add your axle-holders, then axles
In this guide written by a
Teacher-of-the-Year
RACERS MANUAL with wheels and you're ready to roll!
winner, your kids will

learn how to construct This manual begins with Cat.# 19-20-553..$2.40 Shown Actual Size
race cars from ordinary, a class planning aid, for 1/8” axle 100/pkg
affordable household and answers the
materials, while learning question “How can I Cat# 19-54-1024$8.00 100/pkg
the science behind how power a car with a Cat.# 19-20-552..$3.95 for 1/8” diam. dowel/axles to
they work, in language mousetrap?” by
explaining the forces of for 4mm axles 100/pkg run freely
easy enough for a 7th
grader to understand. torque, drag, friction,
Cat# 19-20-545 $7.25 100/pkg
With color photos, diagrams, fun illustrations, and energy and tension. Cat.# 19-20-554..$4.00
four complete projects, your family will be racing 9/64” for 4mm dowel/axles to
vehicles that go the distance and go for the gold! A
for 5mm axles run freely
bonus project is included for students looking for 100/pkg
super science fair project. Cat# 19-20-546 $7.25 100/pkg
100/pkg 7/32” for 3/16” dowel/axles to
run freely
Cat# 80-5758-00 ....$15.95
Cat.#80-5774-00.....................$4.15
KIDDER Balloon Jet Car Class Pack KIDDER Prop Racer Car Class Pack
Cat.# 80-5469 18 Student Class Pack...$88.00 Cat.# 80-5431-00 35 Student Class Pack...$98.00
Balloon Jet Car Class Pack Parts List Prop Racer Class Pack Parts List
72 x Front Dragster Wheels . . . . . . . . . .Cat# 19-1015 1 x Propeller Assemblies 35/pkg . . .Cat# 19-FF-380
1 x Straws 10/pkg . . . . . . . . . . . . . . . . .Cat# 19-1022LRG 1 x 7” Rubber Bands 35/pkg . . . . . .Cat# 19-FF-370
18 x Chassis . . . . . . . . . . . . . . . . . . . . . .Cat# 8054Chassis
Individual Kits 18 x Mounts . . . . . . . . . . . . . . . . . . . . . . .Cat# 8054CHASIM Individual Kits 1 x Straws 10/pkg . . . . . . . . . . . . . . .Cat# 19-1022LRG
1 x Basswood Sheets 3mm 6/pkg . .Cat# 83-BW404
80-5469-SK 36 x Axles . . . . . . . . . . . . . . . . . . . . . . . .Cat# 19-1023 80-5431-SK 70 x Doweling 3mm 5/pkg . . . . . . . . .Cat# 83-2002-16
2 x Plastic Tubing 9mm o.d . . . . . . . . . .Cat# 80-1103-00
$5.75 ea 1 x Balloons assorted . . . . . . . . . . . . . .Cat# 19-2025 $3.50 ea 140x Front Dragster Wheels . . . . . . . .Cat# 19-1015
5 x Idea Sheet . . . . . . . . . . . . . . . . .Cat# 80-5759
6 x Idea Sheet . . . . . . . . . . . . . . . . . . . .Cat#80-5768 NOTE: Paper Towel Tube is not included in class pack.

Mag-Lev Class Pack Toy Motors
High-speed motor can produce
Kit includes the parts to build your magnetic up to 17K/RPM. Used for
levitation cars (excluding body material). maglev & coloured gears (see
pg. 8). Input up to 3-9V DC, 2
30 Student Class Pak mm spindles.
QTY $ /PKG
5 x 80-3550 3-9V Input Toy Motor 6/pkg
1 $8.60
5 x 80-3555 3”Plastic Propellers 6/pkg
2-5 $7.60 Cat# 80-3550-00 6/pkg
3 x 80-3560 Magnets 50/pkg (see more motors on page 13)
6-19 $7.20
1 x 80-5747 Procedure Sheet
20+ $6.90
Cat.# 80-5450-00................. $120.00

Magnets
Ideal for creating
vehicles, tracks and more.
Dimensions: 1” x 3/4” x .187
(25 x19 x 5 mm)
QTY $ /PKG
Cat# 80-3560-00 50/pkg
1 $16.75
2-5 $15.65
6-19 $14.90
20+ $14.15
Propellers
3” (76 mm) plastic high-speed
MagLev Vehicle Module propeller with three blades. (Fits
MagLev motor 80-3550). Ideal propeller
MagLev is an exciting module which delicately weaves critical thinking gn
Vehicle Desi for model planes, mag-lev, etc. 3
skills with an introduction to the concepts of magnetic levitation and blades with 2mm hole. (assorted
electric motors. Students will dabble with models of magnetic levitation QTY $ /PKG colours)
1 $7.90
vehicles, investigate how electric motors work, and build vehicles
2-5 $7.4 Cat# 80-3555-00 6/pkg
which will travel eight feel in under three seconds. 6-19 $7.20
Cat.#80-5735-00....$57.50 20+ $7.00
WOOD SKEWERS Cut Your Own Axles

DOWELS 2’ (61 CM) These 2.5mm wood sticks can be used as These 12” steel
axles in many projects. They are sold in rods can be cut
packages of 100 pcs and are 12” long. to any length.
They are 1/8” in
diameter.
12”
”
1 1/4
1/8” eters
diam Qty 1
$4.00
2-5
$3.60
6-UP
3.40
If you drill a 3/8” hole, 3/8” dowel will squeak into it, not fall through it. This
goes for all sizes. You can always make a tight dowel loose. Its hard to go Cat.# 83-2001-00 Cat# 19-1028-00 6/pkg
the other way.
$1.90 100/pkg
Cat.# Diameter Pkg 1 . 2-5 . 6-19. 20-49 50+.
83-2002-02 1/8” (3 mm) 8 $2.60 $2.40 $2.30 $2.15 $2.00 WOODEN PADDLES CD Washer/Spacer
83-2002B02 5/32” (4MM) 8 $2.70 $2.50 $2.40 $2.25 $2.15 These rubber washers fill in the centre
83-2003-02 3/16” (5 mm) 8 $3.25 $3.05 $2.90 $2.75 $2.60 hole on a CD. They are sold 6/pkg.
83-2004-02 1/4” (6 mm) 8 $4.15 $3.85 $3.65 $3.45 Cat.# 19-20-558 6/pkg
83-2005-02 5/16” (8 mm) 8 $5.50 $5.10 $4.85 $4.60 $4.35 A
83-2006-02 3/8” (10 mm) 4 $3.40 $3.15 $3.00 $2.85 $2.70
83-2008-02 1/2” (13 mm) 4 $5.80 $5.40 $5.15 $4.85 $4.60
83-2009-02 5/8” (16 mm) 2 $3.20 $3.00 $2.85 $2.70 $2.55 B
83-2010-02 3/4” (19 mm) 2 $3.55 $3.30 $3.15 $3.00 $2.80 QTY $ /PKG
A) Wood Paddles 5.5” X 11/16” 1 $2.70 6 mm
83-2011-02 1” (25 mm) 2 $5.85 $5.45 $5.15 $4.90 $4.60
Cat# 34-54-1013 500/pkg $10.00 2-5 $2.50 diameter 3/16”
83-2013-02 1 1/4” (25 mm) 2 $11.20 $10.45 $9.90 - - B) Wood Paddles 4 3/8” x 3/8” 6-UP $2.25 hole
Cat# 83-1600-00 1000/pkg $9.65

Wooden Wheels & Discs Class Pack Bulk Rear Slicks Bulk Front Wheels
An assortment of various sized
wheels and dowels to make various
projects.
$
85.00
CAT.# 19-5426..$130.00 Cat.# 19-5425.$90.00
(Not exactly as illustrated) 500 pcs Rear Mag Wheels
500 pcs Front Wheels
1 9/16” Diam (40 mm)
1 5/16 Diam (34 mm)
5/8” Wide (16 mm)
CAT.# 83-5420 CLASS PACK Sample Application Uses 1/8” axle
3/16”” Wide (4 mm)
Uses 1/8” axle
Thick Card Wheels Plastic Spools Super Wheels

(in three sizes)
Multi-purpose reusable tires made from a large red plastic pulleys and
rubber rings. Available in packages of 10.
All wheels use

4mm axles.
Thick card disks with 3/16" hole in packs

of 100. Available in different diameters:
25mm, 38mm, 51mm and 63mm.
100/pkg 10/pkg
Pack of 100 plastic spools in assorted
Cat# 83-1214-00 25mm . . . . . . . . . .$7.45 colours for wheels. Use small card
Cat# 83-1216-00 38mm . . . . . . . .$8.00 disks to secure axle through spools
Cat# 83-1218-00 51mm . . . . . . . .$10.95 mentioned above. Axle hole 5/16” Cat# 83-54-1248 (50mm) . . . . . . . $8.00
Cat# 83-1219-00 63mm. . . . . . . .$13.25 diam. Can be used as wheels or Cat# 83-54-1246 (38mm) . . . . . . . . $7.50
pulleys. Cat# 83-54-1244 (25mm) . . . . . . . . $7.00
Cat# 83-1240-00........$25.90
MDF Wheels Screw Eye Axle Washers &

These 6mm thick fibre board wheels come with drilled centre holes for 4mm Holders Mini-washers
Screw eyes are used to hold axles in place.
(83-2002B02) or 3/16” (83-2003-02) dowel. They are available in diameters Washers are used to keep the wheels in
Build a wooden frame, add your axle-holders,
of 34mm, 54mm and 74mm (100/pkg) or a mixed bag of 150/pkg. then axles with wheels and you're ready to roll! place on axles. Fit on 3/16" or 4mm axles.
The large washers are in packs of 150
Shown Actual Size and the mini-washers in packs of 100.
A B
Cat# 19-54-1024$8.00 100/pkg

for 1/8” diam. dowel/axles to
run freely
Cat# 19-20-545 $7.25 100/pkg

9/64” for 4mm dowel/axles to
run freely
Cat# 19-20-546 $7.25 100/pkg A. Mini WashersFits 1/8”-3/16” dowels.

7/32” for 3/16” dowel/axles to Cat# 19-20-555 ..$5.00 100/pkg
run freely
B. Large 3/4” Washer (3/16” hole)
Cat# 19-20-556 .........$11.80 150/pkg
Clothes Pegs Axle Gussets

These cardboard supports can be used to
hold axles in place.
Axle Supports
4MM DIAMETER HOLE Traction Bands
Cat# 83-1247-00 34mm $22.50 Can be hot
Cat# 83-1249-00 54mm $27.00 glued into
Cat# 83-1251-00 74mm $32.50
place.
Cat# 83-54-1253 Assort.150/pkg $39.95
3/16” DIAMETER HOLE

5”
Cat# 83-1256-00 ` 34mm $22.50

1.
Cat# 83-1258-00 54mm $27.00

Cat# 83-1260-00 74mm $32.50 These fit the 54mm and
74mm only.
2.5”
Cat# 83-54-1262 Assort.150/pkg $39.95
Cat# 19-FF-360 Cat# 19-20-557
1/4LB..$4.05
Cat# 83-2015-00..$2.95 50/pkg
55x39x39mm 5mm hole.....$18.95 500/pkg

Pulley Blocks
Assorted Plastic Pulleys Demo Board - Pulleys
Pulley blocks are free running 50mm
A useful teaching tool that demonstrates
C how pulleys work. Ideal for classroom diameter pulleys in a housing with
discussion about how pulleys can be swivel hooks at each end.
used in construction activities.
F
C
B
E G
A
A) Single Cat# 80-3594-01........$2.50
A H Cat# 80-3587-00.............$40.05
B) Double Cat# 80-3594-02.......$3.50
(set of 4 sizes 40
pc/pkg)
Pulley Cord (nylon) C) Triple Cat# 80-3594-03 ........$4.50
B (set of 3 sizes 20 pc/pkg)
Figure A Nylon cord that runs well in the pulley The set of 5 pulleys blocks contains
4 sizes of pulleys (10 each size), 10mm, 20mm, 30mm, 40mm. 10mm fits blocks. 20m roll. 2 single, 2 double and 1 triple blocks.
toy motor, 2mm shaft which can be bored out to 3 mm (1/8”) Cat# 80-543594X ......................$14.95
CAT# 80-3580-00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pkg $12.50
Rubber Bands
Figure B
GGO-Pulleys come in three sizes: 3/4", 1+1/4" and 2". Centre hole is NEW
3/16". Pack 20.
B) Cat # 80-3582-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.50 Cat# 19-20-547 ....$8.50
#14 Rubber Bands
Figure C, D, E
Cat# 19-2016-00 1 lb bag . . . . . . . . .$9.75
Red pulleys in three sizes: 25mm, 38mm and 50mm diameter. Centre Bushings Cat# 19-2016-25 1/4 lb bag . . . . . . . .$2.50
hole is 4mm. Pack 10
C) Cat # 80-3591-00 50mm 10/pkg . . . . . . . . . . . . . . . . . . . . . $5.00 #16 Rubber Band
D) Cat # 80-3592-00 38mm 10/pkg . . . . . . . . . . . . . . . . . . . . .$4.50 Cat# 19-2019-00 1 lb bag . . . . . . . . .$9.75
E) Cat # 80-3593-00 25mm 10/pkg . . . . . . . . . . . . . . . . . . . . .$4.00 Cat# 19-2019-25 1/4 lb bag . . . . . . .$2.50
Figure F, G, H #18 Rubber Band

These motor pulleys fit directly on the motor shaft (2mm). They are Cat# 19-2022-00 1 lb bag . . . . . . . . .$9.75
Cat# 19-2022-25 1/4 lb bag . . . . . . .$2.50
available in 3 sizes and are sold in packs of 10. (see motor page 13)
F) Cat # 80-3577-00 10mm 10/pkg . . . . . . . . . . . . . . . . . . . . . . .$3.95 #19 Rubber Band
G) Cat # 80-3577-50 12mm 10/pkg . . . . . . . . . . . . . . . . . . . . . .$5.95 Bushings convert a 4mm hole into a 2mm
Cat# 19-2023-00 1 lb bag . . . . . . . . .$9.75
H) Cat # 80-3577-75 25mm 10/pkg . . . . . . . . . . . . . . . . . . . . . .$8.75 one that fits a motor. Cat# 19-2023-25 1/4 lb bag . . . . . . .$2.50
Cat# 80-3588-00 ...$1.75 20/PKG
Pulley Kits O-Rings Pulleys & Gears Class Pak
This kit demonstrates how pulleys
Use these rings Pulleys & Gears Class Pak
work and investigates how motion is A to convert your 80 x assorted plastic pulleys . . . . . . .Cat# 80-3580-00
transferred from one pulley to another.
plastic pulleys 40 x assorted gear sets plastic . . . . . .Cat# 80-3570-00
into wheels.
20 x 1” diam pulleys w/4mm hole . . .Cat# 80-3585-00
10/pkg
10 x 2” diam pulleys w/4mm hole . . .Cat# 80-3590-00
B A. 50mm . .$3.15 8 x 2’ x 1/8” diam wooden dowels . . .Cat# 83-2002-02
Cat# 83-1248-00
8 x 2’ x ¼” diam wooden dowels . . . .Cat# 83-2004-02
8 x 2’ x 3/16” diam wooden dowels . . Cat# 83-2003-02
B. 38mm . .$2.95
Cat# 83-1246-00 8 x 2’ x 4mm diam wooden dowels . Cat# 83-2002B02
Student Single Kit C CAT.# 83-5435-PG for axles (to fit all gears above)
Cat# 80-5432-SK................$9.00 C. 25mm . .$2.80 6 x 3-9V Motors to fit pulleys & gearsCat# 80-3550-00
Cat# 80-5432-00............ $135.00
Cat# 83-1244-00
$135.00 6 x worm gears . . . . . . . . . . . . . . . . .Cat# 80-3575-00
(Some components may be substituted with equal value.)
Electric Car Kits Class Pack Motor Car Class Pack

This simple value packed kit explores movement, electricity and forces. All This kit uses pulleys and a motor. All parts are included (excluding the
parts and instructions are included in the kit. Battery is included. battery).
80-5433-SK...$12.95 80-5435-SK...$10.95
24 Student Class Pack 30 Student Class Pack
80-5433-00...$226.00 80-5435-00...$265.00
BU
BU
K K
L
L

Gears for All Your Needs
M 10.5 cm diam.
A B
NEW Key with
7/64”hole
H
2 mm hole
N
I O
3 cm diam. 5.5 cm diam.
C
This set of gears is designed for use on model projects. The
small 8 tooth gear will fit on most 2mm motor shafts that are
D K found on lots of DC motors. Gears have a keying feature that
J P allows them to be changed quickly and easily from the key. Once
E the key is secured to the driveshaft the gears can be removed
L quickly without glue or tape etc. The key will press fit on 7/64”
diameter. It can also be drilled out to fit larger shafts.
(works together with B-12 hole hub on page 28)
F Cat# 80-3KW065.........$10.75 /pkg
G (4) Gears (teeth = 64, 32, 16, 8)
(1) Driveshaft Key
A H-L
This set of gears contains 40,30,20,and 12 tooth gears and These red plastic gears fit tightly on 4mm dowel. Each pack of 10 gears
3 bushings. There are 4 sprues per package. 2mm motor spindle 12 tooth comes with bushings to make a hole 2mm to fit a motor shaft.
gear included. (40,30,20 tooth gears have 3/16” hole diam.) They are sold 10/pkg.
CAT# 80-3570-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.70 28/pkg H Cat# 80-3569-50 50 teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
I Cat# 80-3569-40 40 teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
J Cat# 80-3569-30 30 teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
B-D K Cat# 80-3569-20 20 teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
These gears have a standard number of teeth to create easy ratios and are L Cat# 80-3569-10 10 teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
beveled spur gears so that they mesh easily. They are sold 20/pkg. They all
run freely on 3/16” dowels.
B Cat# 80-3571-60 60 teeth (61 mm diam) . . . . . . . . . . . . . . . . . .$9.75 M-N
C Cat# 80-3571-40 40 teeth (41 mm diam) . . . . . . . . . . . . . . . . ..$5.25 These worm gears mesh with the 10,20,30,40, and 50 tooth gears. They
D Cat# 80-3571-20 20 teeth (21 mm diam) . . . . . . . . . . . . . . . . . .$2.95 are available in small and large. The large gears fit end to end and also fit
a 2mm motor shaft.
M Cat# 80-3575-LG10/pkg large . . . . . . . . . . . . . . . . . . . . . . . . ..$10.25
E N Cat# 80-3575-00 10/pkg small . . . . . . . . . . . . . . . . . . . . . . . .$10.35
This motor spindle gear fits our standard 2mm motor shaft. It has 10 teeth Cat# 80-54-3575 ( 10 Sm/10 Lg) SPECIAL PRICE . . . . . . . . .$15.95
and can also be used as a pulley. They are sold 20/pkg. (See page 13)
E Cat# 80-3574-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.75
O-P
These gear racks are in two sizes and mesh with gears. The small rack can
F Beveled Gear be fastened to a base. The large rack is interlocking.
The teeth in these gears are angled at 45 degrees. They have a 4mm hole O Cat# 80-3574-50 70mm 20/PKG . . . . . . . . . . . . . . . . . . . . . . .$11.95
and are 27mm in diameter. They are sold 10/pkg P Cat# 80-3574-25 100 mm 10/PKG . . . . . . . . . . . . . . . . . . . .$13.00
F Cat#80-3571-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.00
G
These bushings convert a 4mm hole to a 2mm hole for a push fit onto a
motor. They are sold 20/pkg.
G Cat#80-3588-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.75
Move It & Use It Kits MIXED GEARS PACKS

Project Ideas Cat# 80-54-3568 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.50
This kit introduces concepts of mechanical 1 of each size (H to L)
advantage. Begin with exploration of simple Cat# 80-54-3569 . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.50
machines using 10 of each size and 20 bushings (H to L)
levers, gears, Cat# 80-54-3570 . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.90
pulleys, and wheels. 10 of each size plus 6 small worms, 10 large worm gears,
Includes design and 10 large racks and 20 bushings. (H to P)
make activities for
devices and
mechanisms that
move. It includes
comprehensive
notes on
mechanisms.
Cat# 80-5466-SK . . . . . . . . . . . . . . . . . . . . . . .$15.05

Cat# 80-5466-00 20 Student Pack . . . . . .$250.00

A
The Inventa Book of The Inventa Book of

Structures Mechanisms
B An excellent resource for This book explores the
teachers to gain some valuable development and concepts
insight into structures. This book involved in a range of basic
uses illustrations to explain mechanisms including pulleys,
concepts in a way that is clear, gears, levers and ramps. It
straight-forward and easy to uses clever cartoons and
understand. illustrations to describe some
complex concepts in an
accessible manner
Sample
C Page Cat.# 80-5700-02 . . . . .$29.95 Cat.# 80-5700-01 . . . . . $29.95
A..Inventa Starter Pack NEW

This package provides the components and support materials needed to get started using the
Inventa system. All centre hole diameters are 3/16”(5mm). Project Ideas
Cat# 8541-100 .....$289.00 Everything you need!
B..Gears and Pulley Pack

This package contains 25 gears and 30 pulleys; 5 each of 10,20,30,40,50 tooth gears plus
10 of the 10mm pulleys and 5 each of the 30,50,60, and 70mm pulleys. All centre hole
diameters are 3/16”(5mm). See dowel below.
D Cat# 8541-101.....$16.85
C..Special Mechanisms Pack

This package contains 12 winch drums, 12 rack gears (100mm), 12 dual purpose worm
gear/power screw, 6 screw boxes used with power screws, and 12 multi-purpose flange
plates (can be used as cams). Use with 3/16” dowel (see below).
Cat# 8541-107.....$19.45
D..Adapter Pack
This package contains 10 slider plates, 20 end, 30 straight, 10 side, 10 cross, and10
E parallel adapters. Use with 3/16” dowel (see below).
Cat# 8541-109.....$14.25
E..Link Strip Pack

This package contains 30 long link strips, 10 shortlink strips, 10 connector strips, 10 angle
strips, 10 each of 60 and 90 degree gusset plates. All holes are 3/16” diam (5mm)
Cat# 8541-103.....$17.90
F..Bearing and Adapter Pin Pack

This package contains 10 bearing brackets, 10 bearing blocks, 70 long Adapter pins, and
30 short pins. All pins and hokes are 3/16” diam (5mm);
F Cat# 8541-105....$16.85
G..3/16” (5mm) Wood Dowel
G 24” in length 8/pkg.
Cat# 83-2003-02...$3.25 8/pkg See jinks wood
(basswood)
H..Screw Eyes on page 19.
These will allow 3/16” dowel to run freely
Cat# 19-20-546....$7.25 100/pkg
H
A B E
C D
NEW
A..Multi Core Wire M.Simple Slide Switch NEW
100m reel of multi-core wire available in This 35mm long switch can be used to
either black or red. reverse a meagre motor. 10/pkg
Cat# 80-3505-00 Red Wire . . . . .$14.60 Cat# 80-3529-00 . . . . . . . . . . . . . .$9.50
Cat# 80-3506-00 Blk WIre . . . . . .$14.60
N..Micro Switch
B..Alligator Leads This useful switch can be wired either to
Ready-made leads approximately 35 cm switch on a circuit or to break a circuit. F G H
long, 10/pkg Cat# 80-3547-00 . . . . . . . . . . . . . .$2.95
Cat# 80-3504-00 . . . . . . . . . . . . . .$5.00
O..Toggle Switch
C..Round MES Bulbs This switch is designed to fit through a
MES refers to the size of the base thread. 12mm hole in a panel if needed but may
Sold 25/pkg be used unmounted in simple circuits.
Cat#80-3517-00 1.5V . . . . . . . . . . .$8.95 5/pkg
Cat#80-3518-00 2.5V . . . . . . . . . . .$8.95 Cat# 80-3548-00 . . . . . . . . . . . . . .$8.95
Cat# 80-3519-00 3.5V . . . . . . . . . .$8.95
Cat# 80-3520-00 6V . . . . . . . . . . . .$8.95 P..Round Chrome Toggle
The switch unscrews to reveal the
D..Lens MES Bulb connections for the wires and the switch
This style is less likely to break if dropped. itself is easily connected to models. Ea I J K
Sold 25/pkg Cat# 80-3549-00 . . . . . . . . . . . . . .$4.50
Cat# 80-3521-00 . . . . . . . . . . . . . .$8.95
Q..Reed Switch
E..MES Bulb Holder These require a magnet in close
A screwdriver is required to make proximity to close the switch and
connections to this holder.10/pkg complete the circuit. This type of switch is
Cat# 80-3527-00 . . . . . . . . . . . . . .$8.95 often used on doors for burglar alarms.
10/pkg
F..Simple Bulb Holder Cat# 80-3528-00 . . . . . . . . . . . . . .$4.30
An inexpensive socket for miniature ling
bulbs. The socket has two terminals that R..Knife Switch L M N
can be attached with lead wires to batteries. These switches are mounted on bakelite
Sold 10/pkg base with screw holes. ea
Cat# 80-3524-00 . . . . . . . . . . . . . .$3.25 Cat# 80-3541-00 S/P,S/T . . . . . . . .$2.25
Cat# 80-3542-00 S/P, D/T . . . . . . .$2.70
G..Switch w/Fahnstock Clips Cat# 80-3543-00 D/P, S/T . . . . . . .$3.25
These switches are mounted to a plastic Cat$ 80-3544-00 D/P, D/T . . . . . . .$4.95
disc. Each
Cat# 80-3540-50 . . . . . . . . . . . . . .$1.35 S..LEDs
LEDs are an alternative to bulbs and are
H..Bulb Holder w/Fahnstock useful for adding colour to models. The
LEDs require a 3V power supply. 12/pkg
O P
Clips
Sold Each
Cat# 80-3514-00 . . . . . . . . . . . . . .$2.95 Q
Cat# 80-3526-00 . . . . . . . . . . . . . .$1.38
T..Copper Foil
A fun and easy way to make basic
circuits. This self-adhesive foil is 13mm x R le,
I..Break Switch po ow. e,
ol w. le,
33m roll. l e r po . le,
This switch breaks a circuit that is on. Sold ng th l e p hro le hrow po w.
5/pkg
Cat# 80-3501-00 . . . . . . . . . . . . .$16.75 Si gle ng t u b t le hro
i n Si ble Do gle u b t
Cat# 80-3532-00 . . . . . . . . . . . . . .$8.50 s
do
u
sin Do uble
U..Cork do
J..Push Switch These corks are ideal for making
switches. 100/pkg
Circuit switched off as soon as the switch is
Cat# 80-3509-00 . . . . . . . . . . . . .$16.25
released. It works the same as a push door
bell. 5/pkg
Cat# 80-3532-50 . . . . . . . . . . . . . .$6.95 V..Copper Wire
This magnet copper wire can be used to
make a DC motor. 22gauge 150’ roll
K..Buzzers
Cat# 80-3510-35 . . . . . . . . . . . . .$26.25
Mini buzzers with leads. 4/pkg
Cat# 80-3534-00 1.5V . . . . . . . . .$17.95 NEW
Cat# 80-3536-00 4.5V . . . . . . . . .$17.95
L..Slide Switch
This sub-mini switch is sold 6/pkg. SPDT V
.03A at 125 VAC
Cat# 80-3530-00 . . . . . . . . . . . . . .$7.00 S T U

C D E F
B
A
A..Motor Pulleys (2mm hole)
These pulleys fit directly on the motor shaft. H..Propellers
They are available in 3 sizes and are sold 3” (76mm) plastic high-speed propellers
10/pkg with three blades. This is an ideal
Cat# 80-3577-75 25mm . . . . . . . . .$8.75 propeller for mag-lev projects and fits
Cat# 80-3577-50 12mm . . . . . . . . .$5.95 onto a 2mm spindle. 6/pkg
Cat# 80-3555-00 . . . . . . . . . . . . . .$7.90
G G1 Cat# 80-3577-00 10mm . . . . . . . . .$3.95
I..Airplane Propellers
B..Motor 1.5V-3V This propeller is 150mm long. The centre
H I This motor is ideal for solar projects. 2mm fits onto a 2mm spindle. 10/pkg
spindle. Sold 6/pkg 80-3556-00 . . . . . . . . . . . . . . . . . .$11.75
Cat# 80-3545-SO . . . . . . . . . . . . . .$8.35
J..Solar Propellers
This 4 blade propeller is ideal for use with
C..Motor 1.5V-4.5V solar motor 80-3545-SO. 6/pkg 2mm hole
This motor will work with a one or two Cat# 80-3554-00 . . . . . . . . . . . . .$12.00
batteries. 2mm spindle.Sold 6/pkg
Cat# 80-3545-00 . . . . . . . . . . . . . .$8.35
K..2-Blade Boat Propellers
These 2-blade plastic propellers have a
D..Motor 1.5V-7V 3/16:” shaft. They attached to a motor
This motor will take a higher voltage. 2mm using a motor bushing and tubing. Ea
spindle. Sold 6/pkg. 9v battery will work Cat$ 80-3552-35 35mm . . . . . . . . .$3.00
J K Cat# 80-3550-00 . . . . . . . . . . . . . .$8.60 Cat$ 80-3552-40 40mm . . . . . . . . .$3.00
Cat$ 80-3552-45 45mm . . . . . . . . .$3.00
E..Motor 3V-9V
L Uses 2 or 4 batteries for greater torque.
L..3-Blade Boat Propeller
2mm spindle. 6/pkg These 1”, 3 blade propellers are ideal for
Cat# 80-3559-00 . . . . . . . . . . . . . .$8.95 model boat building. 2mm shaft 6/pkg
80-3552-00 . . . . . . . . . . . . . . . . . .$14.95
F..Motor 6V-12V
This heavy duty motor has a 3mm spindle.
M..Self-Adhesive Mounts
Suitable for large robotic projects. Ea These self-adhesive plastic mounts can
Cat# 80-3550-75 . . . . . . . . . . . . .$10.00 be used to secure motors, syringes, and
‘C’ batteries. 6/pkg
M N G.. Motor Spindle Gear
Cat# 70-32-043 3/8” . . . . . . . . . . . .$6.25
(for 5cc syringe)
This spindle gears fits our motors with a Cat# 70-32-063 5/8” . . . . . . . . . . . .$4.80
2mm shaft. It has ten teeth and can also be
used as a pulley. 20/pkg
Cat# 80-3574-00 . . . . . . . . . . . . . .$5.75 N..Aluminum Clips
These clips hold motors, syringes, and
batteries. 6/pkg
G1.. Bushings Cat# 70-32-093 . . . . . . . . . . . . . . .$2.90
These convert a 4mm hole to a 2mm hole
for a push fit onto a motor. 20/pkg
Cat# 80-3588-00 . . . . . . . . . . . . . .$1.75
Electricity Kit NEW Hand Generator Kit NEW

Just wind the motor and watch the light bulb
illuminate.

80-5434-SK...$21.95
Not exactly as shown.
This electricity kit includes fahnstock clips, bulbs, fahnstock

switches, batteries, alligator clips, motors, buzzers, book, all 20 Student Class Pack
in a plastics bin. 80-5434-00....$395.00
This kit includes all the pieces to build 20 hand
Cat# 80-54-3201.....$170.00 generators.

Battery Holders Alkaline Batteries
E
D
C F
B
A
A B C
(We may substitute batteries of equal or better quality)

Fig Cat.# Description 1 2-5 6-19 20-49 50+.
A 70-3207-00 “N” Battery $2.55 $2.20 $1.95 $1.82 $1.65
B 70-3211-00 AAA Alkaline $1.40 $1.20 $1.15 $1.05 $1.00
D C 70-3201-00 AA Alkaline $1.25 $1.20 $1.10 $0.85 $0.78
D 70-3203-00 C Alkaline $2.15 $1.89- -
E F G E 70-3205-00 D Alkaline $2.20 $1.97 $1.87 $1.65 -
F 70-3209-00 9 Volt Alkaline $4.20 $4.00 $3.80 $3.50 -
Fig Cat Description 1 2-5 6+ Automatic Wire Stripper Battery Tester

A 70-32-142 Double AA Cell w/leads 3V ea $0.94 $0.77 $0.68
This useful tool strips away the plastic insulation. The colour scale indicates if the
B 70-32-170 Double C Cell w/leads 3V ea $1.26 $1.05 $0.95
leaving wire strands exposed. battery condition is good, low or
C 70-32-177 Double D Cell w/leads 3V ea $1.50 $1.25 $1.13
Cat# 83-1136-00 . . . . . . . . . .$6.95 ready to be replaced.
D 70-32-236 9V Strap 6/pkg $2.30 $2.20 $2.05
E 70-32-178 “AA” Cell Single 1.5V 10/pkg $6.00 $5.50 $5.00
F 70-32-179 “C” Cell Single 1.5V 10/pkg $9.80 $8.20 $7.20 Cat# 70-3200-00
G 70-32-180 “D” Cell Single 1.5V 10/pkg $9.90 $8.80 $8.00 $11.25
Wire(Multi Core Stranded)

$14.60 /100m Roll
RED. . . . . .CAT# 80-3505-00

BLACK . . . CAT# 80-3506-00
30 W Soldering Iron Screwdriver/ Wire Cutter/Stripper

Wirestripper
A slothead screwdriver that is This is a basic cutter/stripper. Ea
used for small screws like those
on the chrome switch or battery
bulb holder. It has a wire stripper
in the handle.
Flux-Core Solder
Cat# 80-4856-00
$2.75
Cat#80-5740-00..$7.95 Cat#80-5769-00..$8.25
For more details see books on page 42. Cat# 80-4855-00 30w ....$11.90 Cat# 83-1137-00.......$2.90 Cat# 83-1138-00...........$6.95
NEW Soldering Gun Visual LED Voltmeter NEW Digital Multi Meter
NEW
NEW
This pistol grip soldering gun is 100watts
• 7 functions, 19 ranges
• diode & transistor
tester
• DC & AC voltage
• DC current
• Resistance
• Temperature
• Self battery test
Cat# 80-4859-00 As more power is generated, more LEDs light up
$24.00 allowing you to see the voltage output of your
wind turbine or hand generator as it generates
power. It can be used with other small electrical
output devices like solar panels and fuel cells.
Cat# 80-4856-00...$2.75
Requires AA A batteries which are included. It
40gm solder tube registers .25V-10V
Cat# 80-3KW110.......$32.10 Cat# 80-3KW140..........$19.95

Magnets Pack Powerful Rare-Earth Magnets Ceramic Magnets
A comprehensive pack that uses the 'Let's Make It Work You will find many used for these powerful
With Magnets' book as its resource. Contains all the magnets. The lifting capacity for the 1/4” magnet
different varieties and shapes of magnets you'll need.
is 2.5 lbs and for the 1” magnet 30 lbs.
NEW
These magnets are 1” x 3/4” and
Cat# 80-3557-00 . . . . . . . . . . . . . . . . . .$113.50
Cat# SIze Pkg Price are excellent for use in magnetic
Cat# 80-35MAG14 1/4” x 1/10” 20/pkg $11.95 levitation projects.
Propeller, Solar Fan Cat# 80-35MAG38 3/8” x 1/10” 10/pkg $ 5.95
Cat# 80-3560-00....$16.75/50
Plastic, 2mm hole, 4 blades (5 cm diameter). Cat# 80-35MAG12 1/2” x 1/8” 10/pkg $11.95
Ideal for use with Solar Motor Cat# 80-3545-SO Cat# 80-35MAG34 3/4” x 1/8” 10/pkg $23.65
Cat# 80-35MAG10 1” x 1/8” 5/pkg $23.65
Super Wheels
Multi-purpose reusable tires made from a large red
plastic pulleys and rubber rings. Available in packages
of 10.
Cat# 83-54-1248 (50mm) . . . . . . . . . . . . . $8.00
Cat# 83-54-1246 (38mm) . . . . . . . . . . . . . $7.50
Cat# 83-54-1244 (25mm) . . . . . . . . . . . . . $7.00
10/pkg
Cat# 80-3554-00 . . $12.00 6/pkg All with 4mm diameter axle hole.
Solar Cell Solar Motor Science & Technology Activity Resources

Encapsulated mini solar panel with 6" red 100%Curriculum Based
A popular and inexpensive motor that will
and black leads (no soldering required).
work with a single or double 'AA', 'C' or 'D’
Great for science projects or solar energy
battery 1.5v - 4.5v. Spindle size 2mm.
lessons.Connect together in series to Magnet and Charged Materials
increase voltage, in parallel to increase -Grade 3
current.Output is 1.5 volts, 200mA. 3.75" X
2.5". Student Resource
Cat# 8057G-1030...... $8.95
1.5V
Teacher’s Guide
200mA Cat# 8057G-1029..........$24.80
Cat# 80-3545-SO...$8.35
6/pkg
Cat# 80-3568-35.... . $14.25
Sun-up Kit Solar Car Class Pack Photon Solar Racer Kit
This kit includes a
This new solar car high-powered (1v, 500
kit works well in mill ampere) ultra light-
weight encapsulated
bright sunlight and solar cell and a high
demonstrates the amp/low voltage motor
for maximum torque
science of solar and speedy
energy. This car acceleration. The sleek
transparent plastic
is gear driven. body (made from
Single Kits (Packaged) recycled pop bottles)
looks great as is, or add your own custom paint job. The
This solar kit has a CoroplastTM base 80-5438-SK.....$23.00 Photon can travel 10 feet in three seconds on a smooth,
and MDF wheels. 12 Student Class Pack flat surface, when exposed to full sun.8 1/2 x 3 3/4 x 2"H
Single Kits (Packaged) 80-5438-00....$265.00
80-5439-SK.....$22.00
6 Student Class Pack Cat.# 97-PHOTON . . . . . . . . .$29.50
80-5439-00....$125.00
Crank & Slider Kit Lynx Gear Mixed Card Disks
Jig
Multisize
A lynx gear jig that
can be used to
make gears of 4
sizes: 8, 12, 16
A popular kit for grade 6. Students build a crank and 24 toothed
and slider mechanism using pre-cut and drilled gears from card
components. Available in single kits and class disks and dowel. Card disks for use with the Lynx Gear Jig:
packs. 25mm, 38mm, 51mm and 63mm diameters.
(Use with disks and
Mixed pack of 200 wheels.
Single Kit Cat# 83-5425-SK . . . . . . . .$6.95 3/16”dowel shown on
25 Student Class Pack pg 7) Cat# 83-54-1200 . . . . . . . . . . . . . . . .$24.95
Cat# 83-5425-00 . . . . . . . . . . . . . . . . . .$95.00 Cat# 83-3025-00 . . . . . . . . . . . . . . . . .$9.35 (See page 8 to order individual wheels)
Cam & Levers Demo Boards Wheels & Levers Kit

These product clearly demonstrate how different cams & levers work. They Originally designed for Alberta grade 4 Science, this kit demonstrates the
can be used in front of class or as a tabletop resource with a group of use of pulleys, gears and cams to control motion.
children when investigating cams or levers. Available in single kits and class packs.
Cat# 80-3572-25 . . ..........$30.35 Cat# 80-3572-75.............$28.30

Size 46 x 38cm approx. Size 58 x 38cm approx.
Cat# 83-5422-SK . . . . . . . . . . . . . . . . . . . . .$9.90
Cat# 83-5422-00 10 Kit Class Pack . .$80.00
Wooden Cams (pkg 30 assorted) Moving Toys with Cams Cam Teaching Modules
Add simple mechanisms to any model with these ready Set of four wooden models and 16 cams for children
Book to investigate movement. The cams also include
made wooden cams. Single rise, double rise and snail
cams offer you the chance to add movement to your own one that does not work, showing a common problem
Lots of practical
'design and make' model. A mixed pack of 30 cams. children encounter with their models. Pack of 4.
information and tips
Cams fit 5mm dowel and have a maximum diameter of on using cams in toys.
73mm. Easy to follow,
photocopiable. 42
pages.
Cat# 80-3572-50 . . . . $23.85 10 of each shape Cat# 80-5700-08...................$16.95 Cat# 80-3572-35 . . .$46.60
New Automata Kits

These kits teach kids about simple machines. The simple crankshaft and follower moves forward and
backward and up and down. They are perfect for teachers, home learners and inquisitive kids. They
can be built in under an hour and are fun to paint.
This flying pig flaps its wings and kicks
This running horse moves forward and
its legs out as it flies.
backwards while its legs kick out.
Cat# 80-5474-00.....$9.95
Cat# 80-5472-00.....$9.95
Flying Pig
NEW
Running Horse
Painted Kit Painted Kit

Mechanical Dog Kit Tracked Vehicle Chassis Kit Wall Hugging Mouse Kit
This dog walks by transferring motor revolution to The Tracked Vehicle Chassis traverses over objects in The Wall Hugging Mouse races along the wall in a zig-
reciprocating motion via crank and linkage rod. Main body zag manner. When the sensor rod makes contact with
its path and rough terrain. Use this kit as a stand-alone
and legs are made of transparent yellow parts to allow the wall it activates the circuit switch which produces an
or combine it with other accessories making a more
viewing of internal mechanisms. Construction is simple as alternating on/off sequence, turning one motor on while
complex machine with more capabilities. The gear box
parts can easily turning the other motor
can be built with two possible gear ratios–Standard:
be attached with off. The sensor and main
203.7:1 or High Speed–58.2:1.
screws. Wiring switches come with:
Motor: FA-130
has also been Motor: (2) RE-140
Gear Box: Two gear
made simple. Body: Polycarbonate
ratio possibilities,
Chassis: Plastic
standard and high
complete.
This is a fun and easy-to
build kit.
Cat# 9799-71101...$19.95 Cat# 9799-70068...$27.40

Cat# 9799-70108...$23.95
High Power Gear Box Kit Worm Gear Box Kit Twin Motor Gear Box Kit
The High Power Gear Box, High Efficiency, works well With the Worm Gear Box, High efficiency, it is The Twin Motor Gear Box uses a two motor system to
when extra torque is necessary. Two gear ratios are possible to have high power or high speed with two provide power and speed to turn the hex shaft. The gear
possible, and a RE-260 motor is included. Several types different gear ratios. Several crank arms have been box is made from high quality plastic. Use this gear box
of crank arms are included for extra flexibility in design. supplied along with a RE-260 motor. This gear box and motor set with other Tamiya Construction and
works well in a variety of Tamiya Construction or Robotics products. Two FA-130 motors are included.
Robotics projects. Gear Ratios: 58:1 207:1
Motor: (2) FA-130
Cat# 9799-72003...$18.90 Cat# 9799-72004...$17.95 Cat# 9799-70097...$12.00

Pulley Unit Set Planetary Gear Box Kit Solar Power Generator Set
A great introduction to the pulley, the Pulley Unit Set is Getting its name from the way the gears rotate like the This Solar Power Generator Set is perfect for young
similar in function to a gear box. Five pulleys in all are planets around the sun, the Planetary Gear Box is a children and educational purposes. Electricity generated
included in the set along with a universal arm and pulley precise, high quality gearbox with a RE-260 motor built by the solar panel is charged in a capacitor installed in the
mounts. A motor and motor mount box are also included. into the gear box itself to add to its compactness. A wide car model. Detach the car from the cradle, and you can
Combine this set with other Tamiya Construction and range of gear ratios can be attained, and two kinds of enjoy running the car model for 3 minutes.. It includes
Robotics products and let your imagination run wild crank arms are supplied for a wider range of functions. 65x65mm solar panel (Generates 2.0V 125mA /
35,000lx.).
and car model with a
car carrier.
NEW
Cat# 9799-70121...$17.95 Cat# 9799-72001...$27.30 Cat# 9799-75024...$77.50

Remote Controller Kit 2 Simple Gearbox Motor 4 Channel Remote Control Box
NEW
This set includes all basic parts needed to build a crawler- This simple gearbox and motor has a 4mm Four motors can be controlled with this 4-Channel
type remote control robot. This allows users not to worry diameter output shaft which runs 40 times slower Remote Control Box. The control sticks have a self-
about gathering parts, and instead concentrate on than the motor itself. Use it to drive models slowly. centering function which automatically moves them back
building the robot, making it perfect for using in fair and to the neutral position. Use with Tamiya Construction
balanced classroom projects. This kit includes a 4- Materials for robotics projects or combine with items from
channel remote
(3-6v required)
the Educational Kits’ section to give them more functions.
control box, twin-
motor gearbox, 2 D batteries are
tracks and roller required
wheels, universal
arms, plate and
rivets.
Cat# 9799-70170...$57.00 Cat# 80-3538-00...$6.50 Cat# 9799-70106...$18.90

Basswood Building Strips for Structures
These architectural model builders wood can be used to build miniature
houses and other buildings. They are sold 50/pkg and are 24” (61cm) in
length.
Model home projects courtesy of
Mr. Medhat Tadras who teaches
technology studies at Westmount
Actual Size S.S. in Thornhill.
A B C
Fig Size Represents Cat# Qty 1 2-5

A 4mmx12mm 2’ x 8’ Joist 83-BW0412 $22.95 $21.25
B 4mmx9mm 2’ x 6’ Joist 83-BW0409 $20.65 $18.55
C 4mmx6mm 2’ x 4’ Joist 83-BW0406 $20.00 $18.00
Tower Kit Class Pack Trebuchet Kits

Middle school and high school will learn
Cat# 83-5400101 . . . $27.60
the secrets to design and construction
(qty price available)
concepts using 1/8” x 1/8” x 24” balsa
strips. This kit includes graph paper, A tradition trebuchet made from wood to
tacky glue, instructions as well as a withstand the forces involved. Uses pre-cut
teacher’s manual. 10mm wood pieces and is complete with
instructions.
NEW • Made from high quality Basswood
• Precut and pre-drilled
Cat# 80-548655X....$110.00 • Almost 18" long and 9 1/2" tall
24 Student Tower Class Pack • Working model with bucket
• Skill Level 3
(You can re-order the wood only • Ages 16 and up, 10-16 with adult supervision
#83-AW044 100/pkg see page 19) • Laser cut Plywood Wheels
House Framing Kit NEW House Framing Kit NEW

Learn the fundamentals of house framing. This kit includes wood, tools, Learn the fundamentals of house framing. This kit includes wood, tools,
hardware and instructions to build a two bedroom home with hip roof. 3/4” hardware and instructions to build a two bedroom home with truss roof. 3/4”
scale Foot pad-approx.1 1/2’ x 2’. scale Foot pad-approx.1 1/2’ x 2’.
Cat# 83-541001C.......$173.50 Cat# 83-541041C.......$ 173.50
Hip Roof House Truss Roof House

Framing Kit Framing Kit
Lift Bridge Kit Introduce the concepts of center of balance, equilibrium , and the
Teaching Lift Bridges DVD
lever as a simple machine.This is a scale model of a Bascule bridge Our Teacher's Guide contains a
which teaches physics & engineering. The parts are laser cut with wealth of information to help you
adjustable counter weight and roller platform. The kit contains one present this module, including
leaf of the two-leaf bridge. 1/130 scale. National Science Standards for this
Cat# 83-548670X........$173.50 NEW product, a resource list with web
12 Student Lift Bridge Class Pack links, and lesson plans. Written for
2 Grade Levels; 5 - 8 and 6 - 12.
Cat# 83-5486702..........$14.95
Lift Bridge Kits
Cat# 83-548675 $7.95

Mitre & Razor Saw Bass & Balsa Wood (Jinks)
MITRE BOX
This aluminum mitre box is just 6” long
making it ideal for miniature work. Each
unit has two45° and one 90° angle cutting
slots. Use with the Razor Saw set below.
Qty Ea
Cat.# 50-55665 1
2-5
$13.75
$13.00
100/ PKG
6+ $12.60
RAZOR SAW BASS WOOD STRIPS 61 cm length (24”) $/Pkg of 100 .
This razor saw cuts through wood or metal Cat.# Size Price 2-5 6+
(soft metal). It can be used with the above 83-BW058 05 mm x 8 mm (3/16” x 5/16”) $41.40 $39.10 $36.80
mitre box or on its own. Qty Ea 83-BW0510 05 mm x 10 mm (3/16” x 3/8”) $41.40 $39.10 $36.80
1 $12.75
83-BW044 03 mm x 3 mm (1/8” x 1/8”) $36.00 $33.60 $32.00
Cat.# 50-55001 2-5 $12.05
6+ $11.35 83-BW055 05 mm x 5 mm (3/16” x 3/16”) $36.75 $34.65 $32.55
83-BW066 06 mm X 6 mm (1/4” x 1/4”) $39.90 $38.00 $36.10
83-BW088 08 mm X 8 mm (5/16” x 5/16”) $41.40 $40.25 $37.95
Kidder-Kut Hand Mitre w/Adjustable Fence 83-BW1010 10 mm x 10 mm (3/8” x 3/8”) $46.80 $45.50 $42.90
83-BW1212 12mm x 12mm (1/2” x 1/2”) $49.50 $46.50 $45.00
Cuts
Cuts basswood to any angle!
BALSA WOOD STRIPS 61 cm length (24”) $/Pkg of 100 .
Cat. Size Price 2-5 6+
83-AW044 3 mm x 3 mm (1/8” x 1/8”) $23.25 $20.95 $18.60
83-AW055 5 mm x 5 mm (3/16” x 3/16”) $29.20 $27.60 $25.95
83-AW066 6 mm X 6 mm (1/4” x 1/4”) $44.00 $39.60 $36.10
Cat.# 83-1126-00
$29.95
Replacement Blade HYDRAULICS WOODEN
Cat# 83-1127-00 $9.80 MODELS ARCHITECTURE
Desk Top Cutting Mats Economy Glue Gun Cardboard Gussets

This economical mini glue gun is perfect for Preprinted sheets to cut your own cardboard corners or
small craft projects. It is 110v with 10watts. gussets. Designed to fit the Lynx jointers and 10mm or
8mm wood. .
QTY $ each
1 $5.90
2-5 $5.55
6 - 19 $5.20
20-19 $4.85
50-UP $4.50
These mats self-healing properties allow
them to be used over and over without
apparent damage caused by the knife. Cat# 80-480-210
Your knife will remain sharp longer and you'll Glue Sticks
4” x 5/16” 50/pkg
never work on a lumpy surface again.
Cat#80-4804450
Cat# 83-1108-00 . . . $15.95 Qty 1 $5.65
BULK Cat# 83-1709-00 8mm 2000/pkg . . . . . . .$7.50
Printed with a 1cm reference grid. 80-4854450 Cat# 83-1707-00 10 mm 1500/pkg . . . . . .$7.50
24" x 17" (60cm x 45cm). $34.00 5 lb Bag
Glue Cups WOOD GLUE

Distribute small amounts of glue to
Glue for All Your Needs
A non-toxic wood glue for design and make activities. Only a
students with these handy glue holders. small amount is required.
They come with a lid to keep glue fresh. A A) 83-1751-00 400 ML .. . . . . . . . . . . . . . . . . . . . . . . . . ...$8.65
B) 83-1749-00 150 ML ... . . . . . . . . . . . . . . . . . . . . . . . . . ..$4.95
B WELDBOND GLUE
Weldbond is a power-packed adhesive that bonds most anything. It
works fast to permanently join many products to themselves as well
C
as to each other.
D C) 83-1755-00 114 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.85
SUPERJET GLUE
This is a thickened instant glue which bonds in 3-10 seconds. It is
ideal for building wood structures. Use with caution..
D) 83-1764-00 1/2oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.60
D) 83-1765-00 1oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.75
Cat# 83-1165-00 $.95 pkg/10
Wood Skewers Balsa & Basswood Bass Wood & Balsa Wood
These 2.5mm wood sticks can be used
as axles in many projects. They are sold Scrap Packs Sheets
6/pkg
in packages of 100 pcs and are 12” long. Assorted strips, sheets and blocks of
basswood bagged and ready for your Bass & Balsa Wood Sheets $/Pkg of 6 .
project ideas. Each piece is 9” (23 Cat.# Size Wood Price 2-5 6+
cm) and under. 83-BW402 4” x 24” x 1/6” Basswood $20.10 $18.00 $16.00
Qty $/Pkg 83-BW403 4” x 24” x 3/32” Basswood $21.00 $18.90 $16.80
83-BW404 4” x 24” x 1/8” Basswood $21.40 $19.05 $18.10
1 $7.20 83-BW406 4” x 24” x 3/16” Basswood $22.75 $20.80 $19.80
2-5 $6.65 83-BW408 4” x 24” x 1/4” Basswood $31.50 $28.35 $25.20
6+ $6.50 83-AW402 4” x 18” x 1/16” Balsa Wood $07.60 $06.80 $06.05
83-AW403 4” x 18” x 3/32” Balsa Wood $08.40 $07.55 $06.70
83-AW404 4” x 18” x 1/8” Balsa Wood $8.40 $07.55 $06.70
Cat.# 83-2001-00 Cat# 83-AWPKG Balsawood 83-AW406 4” X 18” X 3/8” Balsa Wood $16.20 $14.60 $12.95
Qty 1 $1.90. 2-up $1.71 Cat # 83-BWPKG Basswood
Wooden Paddles Brass Connectors Corrugated Plastic

Handy for making switches, fastening The name Coroplast™ applies to a wide range of extruded twinwall plastic sheet
sheet materials, or making levers with products produced from a high impact polypropylene copolymer. This corrugated plastic
tongue depressors or popsicle sticks. Sold sheeting is excellent for making small science projects. It is light, inexpensive and easy
100/pkg. to use. The sheets are 4mm think in panels of 24” x 32”.
Cat Colour Price
A 80-1247-00 Black $4.20
80-1227-00 Blue $4.65
80-1222-00 Green $4.65
Sideview 80-1201-00 Natural $4.65
80-1212-00 Red $4.65
B 80-1203-00 White $3.70
80-1232-00 Yellow $4.65
80-54-1200 7 Assorted $28.00
A) Wood Paddles 6” X 3/4” Cat 83-1616-00 1/2” . . . . . .$2.95
Cat# 34-54-1013 500/pkg $10.00*
Cat# 83-1618-00 3/4” . . . . .$2.95
B) Wood Paddles 4 3/8” x 3/8”
Cat# 83-1600-00 1000/pkg $9.65* Sheets are 24”x 32” and 4mm thick.
Cat# 83-1620-00 1” . . . . .$3.20
7 Sheet Assorted Pack Project Idea from Rainbow
*Use hole punch on page 32 (Very Heavy Duty Punch) to make either 3mm Cat #80-54-1200 $28.00 Technology Book 80-5739
or 4mm holes in the wood paddles. (Kidder chooses the colours)
Maple Dowels 2’ (61 cm) Assorted Metal Shapes for Model Building
Size
New leng
ths
’ in
old 2
All s
METAL TUBE SCRAP PACK METAL SHEET/STRIP SCRAP METAL SHAPES SCRAP
If you drill a 3/8” hole, 3/8” dowel will squeak This package has a vast assortment PACK
PACK
into it, not fall through it. This goes for all of tubing and shapes. It is an ideal This package contains an
This package has a large assortment assortment of brass, copper,
sizes. You can always make a tight dowel assortment for scratch building and
of brass, copper, and aluminum sheet aluminum and stainless steel strip
loose. Its hard to go the other way. handy in every workshop. and strips. Ideal for model builders. and shapes.
Cat.# Diameter Pkg 1 . 2-5 . 6-19. 20-49 50+. Cat.# 83-54-707 $19.25 Cat.# 83-54-727 $12.00 Cat# 83-54-737 $13.15
83-2002-02 1/8” (3 mm) 8 $2.60 $2.40 $2.30 $2.15 $2.00
Artstraws - Excellent for Design & Technology
83-2002B02 5/32” (4MM) 8 $2.45 $2.30 $2.10 $1.93 -
83-2003-02 3/16” (5 mm) 8 $3.25 $3.05 $2.90 $2.75 $2.60 ARTSTRAWS are an ideal design and technology material. They are
inexpensive, easy and fun to work with and very versatile. By using
83-2004-02 1/4” (6 mm) 8 $4.15 $3.85 $3.65 $3.45 -- paper straws, rather than wood or metal, students can learn about the
83-2005-02 5/16” (8 mm) 8 $5.50 $5.10 $4.85 $4.60 $4.35 properties of the material and can more easily gain an understanding
83-2006-02 3/8” (10 mm) 4 $3.40 $3.15 $3.00 $2.85 $2.70 of basic mathematical and physical concepts (perimeter, area,
tessellation, strength, rigidity, stress, stability and movement). The
83-2008-02 1/2” (13 mm) 4 $5.80 $5.40 $5.15 $4.85 $4.60 straws are 40cm in length (16”).
83-2009-02 5/8” (16 mm) 2 $3.20 $3.00 $2.85 $2.70 $2.55
83-2010-02 3/4” (19 mm) 2 $3.55 $3.30 $3.15 $3.00 $2.80
83-2011-02 1” (25 mm) 2 $5.85 $5.45 $5.15 $4.90 $4.60 Cat# 83-1804-00 4mm . . . . . . . . . . $45.00 1800/box
83-2013-02 1 1/4” (25 mm) 2 $11.20 $10.45 $9.90 - -
Cat# 83-1806-00 6mm . . . . . . . . . . $45.00 900/box
(Qty. discount applies)
(3mm acrylic rod see page 35
Free D & T Idea Pamphlet Included
Headless Wood Matches
Great to use with the Multi-
Gear jig or where small uniform
lengths of wood are required.
Cat# 83-1825-00
$6.50 2000/pkg

Saws/Hacksaws Double Sided Bench Hook Mitre Box
A Two hacksaws that will cut
through wood and not through With a slot on one side for either 5mm or
skin! 50-235: is a basic hacksaw A 8mm wood and the other for 10mm, these
B with a plastic handle; 50-239:
has a lever to assist in changing bench hooks are suitable for both left and
the blade. Replacement blades right handed children.
Pk 10: 50-236: fine; 50-237:
medium
E A) Large.......$17.65
C Cat# 83-1155-00
D 13” x 8” (10mm/8mm)
Quantity di
A. 16 pt 14” Sandvik Saw D.Small Razor Saw Set.
scounts
B) Small......$6.25 available!
Cat# 50-300 . . . . . . . . . . . . . . . .$24.00 Cat# 50-55001. . . . . . . . . . . . . . . $12.75
Cat# 83-1150-00
B. With Lever to assist in changing blade E. Hacksaw Blades, Fine PK 10
Cat# 50-239 . . . . . . . . . . . . . . . . . . . . .$6.40 Cat# 50-236 . . . . . . . . . . . . . . . . .$4.50
B 6”x 6” (10mm/8mm)
Cat# 83-1150-10
C. Basic hacksaw w. plastic handle. E.Hacksaw Blades Med PK 10
Cat# 50-235 . . . . . . . . . . . . . . . . .$3.50 Cat# 50-237 . . . . . . . . . . . . . . . . .$4.50 6” x 6” (10mm/10mm
Basswood Jointer Manual Hand Drill Drill Bits
A B
10/pkg
This set includes 13 drill bits from 1/16” up to
Designed by teachers these corner jointers have been copied by 1/4”. Use with hand drill above.
others many times! Designed to hold wooden strips at right-angles
and 45 degrees. Both sizes are in packs of 10 and come with an This drill has completely enclosed gears. Drill bits
instruction sheet. can be stored in the handle. It will take drill bits up Cat# 83-1132-00.......$6.25
to 8 mm . (Bits not included).
Fig A: Cat#83-3001-00 . . . .10mm wood . . . . . .$9.95
Fig B: Cat#83-3008-00 . . . .8mm wood . . . . . . . $9.95 Cat# 83-1133-00................$19.95
A “C” Clamps B High Speed Steel Drill Bits 5/pkg

Cat# 83-1134-01 1/16” HSS...$4.50
Cat# 83-1134-03 3mm (1/8”) HSS Bit...$6.15
Cat# 83-1134-04 4mm (5/32”) HSS Bit...$7.80
Cat# 83-1134-05 5mm (3/16”) HSS Bit...$10.80
A variety of clamps to hold materials when cutting and drilling.
FIG A: Cat# 83-1151-00.... C-clamp 3” . . . . . . . . . . . . ..$4.95 Each size sold 5/pkg

FIG A: Cat# 83-1153-00....C-clamp 4” . . . . . . . . . . . ....$5.95
FIG B: Cat# 83-1156-00....Plastic clamps Pk 10 . . . ..$14.90
Kidder-Kut Hand Mitre 12 “ Metal Ruler

A fast and accurate way for cutting This ruler is handy
small wood strips to length. This when using an x-acto
tool is easy to use, with a knife. A cutting mat
convenient die-cast aluminum angle may also be useful. It
24” Basswood Strips 100/pkg plate. It eliminates the need for has measurements in
expensive power tools. It has an both imperial and
adjustable fence. metric.
Cat.# 83-1126-00 $29.95 Cat# 83-1149-75

Replacement Blade Cat# 83-1127-00 $9.80 $2.25
A B C D E F G H
Toolboxes
Fig Cat# Size Primary Tool Kit Gr K-3 Junior/Intermediate Tool Box
A . . . . . .83-BW1212 . . . .12mm Includes 3” C clamp,. low
B . . . . . .83-BW1010 . . . .10mm Kit includes 3” C clamp, small temperature glue gun, 12 low
safely goggles, heavy duty
C . . . . . .83-BW088 . . . . . .8mm temp glue sticks, safety goggles,
punch, kids scissors, 4 10mm junior hack saw, 13 pc drill bits
D . . . . . .83-BW066 . . . . . .6mm Lynx Jointers, double sided
E . . . . . .83-BW055 . . . . . .5mm set, 4 10mm jinks jointer, vertical
bench hook, junior hacksaw and hand drill, double sided bench
F . . . . . .83-BW044 . . . . . .3mm lever, office hole punch, safety hook, safety snips and 16” tool
G . . . . . .83-BW0510 . . .5x10mm snips and 16” tool box. box.
H . . . . . .83-BW058 . . . . .5x8mm
Cat# 83-54-1101......$75.00
Cat# 83-54-1103 ....$95.00
See page 19 for pricing.

4 IN One Kit
Mini Hydraulic Kits Cat# 83-5054-04....$28.80
C
This kits teach kids about simple machines and hydraulics. Using small syringes,
the models move and work in a similar fashion that is seen in the big machines.
Each kit can be built in an hour. They are high quality kits made of natural
untreated wood. Builders only need scissors and a ruler.
NEW A
D
Real wood, pegged together, makes for strong joints!
B
A,B,C,D
Qty Price
1-1 $9.65
A 2-5 $9.10
B C D
6-Up $8.55
Platform Lifter Cherry Picker Excavator Scissor Lift

Cat# 83-50PLTLF Cat# 83-50CHPIC Cat# 83-50EXCAV Cat# 83-50SCILF
Basswood Strips Make Your Own Platforms
These 24” bass wood strips are ideal for bridge design,
hydraulic projects, house building and much more. These baltic birch sheets
can be cut in half to make
ailable.
More sizes av project platforms. The
See page 19.
sheets are 30” x 12” and
100 Sticks /Bundle 1/8” thick.
Cat# Size Price
83-BW066 6 x 6mm $39.90
83-BW088 8 x 8mm $41.40
83-BW1010 10 x 10mm $46.80
83-BW1212 12 x 12mm $49.50
Cat# 83-BP504.........$25.95 6 sheets/pkg
Pneumatic Lifter Kit Robot Arm Kit

A class kit of materials designed "This kit comes with instructions
for primary students that to build a robot arm that
includes the booklet ' Move It'. demonstrates the use of
The kit enables students to build pneumatics or hydraulics
projects using syringes and including a pumping mechanism.
balloons. The model is sturdy and includes
pre-cut and pre-drilled
Cat #83-5432-SK components, syringes, tubing
(SINGLE KIT). . . . . . . . . .$8.95
and control valves. "
Cat #83-5432-00
(20 CLASS PACK) . . . . . . . .$135.00 Cat #83-5075-00.........175.00
Hilltop Video Move it Further Kit

Here is a preview on and exciting A class set of materials for junior
program involving hands on and intermediate students that
contains syringes, tubing,
experience building a mechanism
connectors and control valves and
with real world applicability. It raises the 'Move It Further' booklet. It
awareness of careers in technology. enables students to build project
There is a 20 minute tutorial and a that involved the controlled use of
10 minute “hot to” activity segment. air and water.
Cat #45-5005...$16.50
Cat #80-5445-00.............$170.00

S YRINGES 5/ PKG Vinyl Tubing VALVES & CONNECTORS
(L UER L OCK )
See self-adhesive
clips
clips below.
below.
T CONNECTOR
83-5013 4/PK
2 WAY MALE STOPCOCK
83-5015 2/PK
ELBOW CONNECTOR
83-5012 4/PK
(NOT SHOWN)
Cat# 83-5005-00 25’ tubing . . . . . . . .$5.90

Cat# 83-5005-X4 30m/100 ft tubing $18.00
STRAIGHT CONNECTOR
83-5011 4/PK
3 WAY MALE STOPCOCK
60cc 30cc 20cc 10cc 5cc Project 83-5014 2/PK
Idea
Size Cat.# $/pkg 5 2-5 . 6-19 20-49 50+
5CC 83-5004-00 $2.45 $2.20 $1.94 $1.84 $1.70 Cat.# Description 1 . 2-5 . 6-19 20+.
10cc 83-5010-00 $3.00 $2.70 $2.40 $2.15 $2.10 83-5013-00 T $2.85 $2.55 $2.30
83-5011-00 Straight $1.43 $1.38 $1.33
20cc 83-5020-00 $3.90 $3.50 $3.10 $2.80 $2.75 83-5012-0 Elbow $4.00 $3.85 $3.75 $3.20
30cc 83-5030-00 $5.00 $4.50 $4.00 $3.60 $3.50 83-5014-00 3-way $4.00 $3.80 $3.60 $3.40
60cc 83-5060-00 $9.95 $9.00 $8.00 $7.20 $7.00 83-5015-00 2-way $4.00 $3.80 $3.60 $3.40
Tubing Cutter Pumping it Up with Self Adhesive Clips

Pneumatics These self-adhesive clips make project making easy. There are
now two sizes available. They can also be used to mount
This booklet is designed to batteries and toy motors.
introduce you to basic
pneumatic and hydraulic 6/pkg
principals through design
and make approach. The
activities are suited for use
by individual learners or
within a Design Technology
This is a sharp cutter for slicing program.
tubing to the required size.
Recommended for teacher use only.
Cat #83-5002-00 . . . . . . .$8.45 Cat #80-5756-00 . . . . . . .$2.95
Cat# 70-32-043 1” x 3/8” . . . .$6.25 6/pkg

Hydraulics Class Pak (for 5cc syringes & “AA” batteries)
.00
Includes:
$
85 Cat.#70-32-063 1” x 5/8” . . . .$4.80 6/pkg
• 50 feet clear flexible tubing
(for 10cc-30cc syringes and toy motors)
# 83-5005-00
• 15 x 5 cc Syringes #83-5004-00 Hydraulics Sampler Kit
• 15 x 10 cc Syringes #83-5010-00
• 15 x 20 cc Syringes #83-5020-00 Sample Pack Includes
• 15 x 30 cc Syringes #83-5030-00 a 5cc and 10cc syringe
• 18 connectors & valves (assorted) and 2’ of clear tubing.
• Book 80-5700-18
Hydraulics Workbook
CAT.# 83-5435-HY CLASS PAK

Cat.# 83-5000-SK . . . $1.95 ea
HYDRAULICS PROJECTS MOVE IT! - with Air or Water

An introductory book design for primary
and junior students. The ideas, hints and
tips provide a resource for making
movement using syringes and balloons.
Cat # 80-5700-11 $10.95

These prepackaged programs are the perfect way to start a model rocketry program. You will need a classroom and an open area about
1/2 the size of a football field to run 4-6 one hour building, flying and learning sessions for a one to two week program.
25 STUDENT CLASS PACK 25 STUDENT CLASS PACK 25 STUDENT CLASS PACK 25 STUDENT CLASS PACK
ASTRA ROCKET PROGRAM VIPER ROCKET PROGRAM PAYLOADER ROCKET PROGRAM COURIER ROCKET PROGRAM
00
gg 4 turn
Cat.# 99-5482 ..$365.00 an e Cat.# 99-5599 ..$535.00
Cat.# 99-5486 ..$296.00 Cat.# 99-5487 ..$320.00 Send air and
re
!
into earth
feet afely to
it s
Cat.# 99-5488 ..$285.00 Cat.# 99-5485 ..$330.00 Cat.# 99-5596 ..$495.00
Cat.# 99-5484 ..$260.00 without launcher
without launcher without launcher
without launcher
Length: 13 in / 33cm Length: 17.3 in / 43.8cm Length: 16.25 in. / 41.3cm

Diameter: .94 in. / 25mm Diameter: .98 in. / 25mm Length: 22 in. / 55.9cm
Diameter: .984 in. / 25mm
Recovery: Parachute Recovery: Parachute Diameter: 1.378 in. / 35mm
Recovery: Parachute
Fin type: Balsa wood with Fin type: Moulded plastic fins Recovery: Dual Parachute
Fin type: Balsa wood with TTW
TTW Construction (Optional motors A6-4, C6-5 Fin type: Balsa wood
Construction
(Optional motors B6-4, (Optional motors: B6-4,C6-3
(Optional motors A6-4, B6-4 or
C6-3, C6-5) or C6-5
C6-5)
EXPERIENCED
Recommended for the
Experienced Modeler
Class pack includes rockets (99- Class pack includes rockets (99-1506, Class pack includes rockets (99- Class pack includes rockets (99-
1504) , A6-4 motors (99-6914), B6-4 motors (99-6917), launcher & 1518) , B6-4 motors, launcher & 1511),B6-4 motors, launcher &
launcher & controller. controller. controller controller
Rocket Supplies HOW MODEL ROCKETS WORK

ROCKET MOTORS
C D Nose Cone
A B
Recovery System
A6-4 B6-4 C6-3 C6-5 C6-0
E F G H I Recovery Wadding
Each package includes 3 motors, igniters and recovery
Launch Lug
wading.
Fins
What does number mean?
Astra Viper Payloader EZ Glider
A 6-4 Rocket
Motor Mount
Paper Casing
Letter is total impulse or Motor
total power produced by the
Indicates how fast the
motor enables your
The delay code in
seconds. This is the time
RECOVERY WADING J IGNITERS
Ejection Charge
Delay Charge
motor. Each succeeding
letter has double the power
rocket to travel. The
higher the number the
duration from the end of
thrust to the activation of
K Propellant
of the previous great the speed. the ejection charge Clay Nozzle
L MODEL ROCKETRY GUIDE

(Teaching Guide)
For Science teachers, Quest model rocketry
offers an exciting and fun way of involving
N
students in their own learning. Model Rocketry
is a learning process in disguise! For over 30
New inexpensive
M years at thousands of schools its been an
cardboard design
activity that is motivating, affordable and safe.
Fig Cat.# Description 1 2-5 6-19 20-49 50-up
This book will provide you with all the insight
A 99-1504 13” ASTRA Rocket Kits $9.70 $8.65 $7.80 $7.35 $6.90 you need to get started on your model rocket.
B 99-1506 17” VIPER Rocket Kits $10.65 $9.45 $8.50 $8.05 $7.55
C 99-1518 16” PAYLOADER Rocket Kits $12.85 $11.40 $10.25 $9.70 $9.10 Cat# 80-5755 . . . . . . . . . $8.95
D 99-1511 22” COURIER Rocket Kits $21.90 $19.50 $17.55 $16.55 $15.60
E 99-6914 A6-4 Rocket Motors w/Igniters 3Pk $10.30 $9.00 $8.25 $8.00 – ROCKETS
F 99-6917 B6-4 Rocket Motors w/Igniters 3Pk $11.40 $10.00 $9.10 $8.55 – A Teacher’s Guide with Activities in Science,
Mathematics, and Technology
G 99-6923 C6-3 Rocket Motors w/Igniters 3Pk $12.60 $11.05 $10.10 $9.45 –
H 99-6925 C6-5 Rocket Motors w/Igniters 3Pk $12.60 $11.05 $10.10 $9.45 – This manual is loaded with information on the
I 99-6937 C6-0 Rocket Motors w/Igniters 3Pk $12.60 $11.05 $10.10 $9.45 – history of rocket and rocket principles. It has several
J 99-7110 Extra Tiger Tail II Igniters 6/pkg $7.00 $6.30 $6.15 – –00 activities some of which are Rocket Racer, Newton
Car, Bottle Rocket Launcher, and Balloon Staging.
K 99-7120 Recovery Wadding 100 shts $4.30 $4.00 $3.65 $3.55 $3.35
It also lists suggested readings. It is compiled by
L 99-7610 Launch Pad $18.35 $17.00 – – –00
NASA.
M 99-7510 Electronic Controller $19.90 $18.40 – – –00
N 99-7812 Altitude Finder 2/PKG $14.95 – – – –00 Cat# 80-5746-00 . . . . . . . . . . $19.90

DELTA DART RIGHT FLYER HELICOPTER GLIDER
20 Student Pack
This model is best suited for first time Cat# 99-54-9621
builders. It can be built using glue sticks $67.00 20 Student Pack
in conjunction with white glue for faster, Cat# 99-54-9623
This model has cambered airfoil wings $67.00
easier and cleaner projects.
and a low thrustline for high endurance
flights. It can be flown with or without
landing gear for drag/weight
Specifications: experiments. Specifications: Quest's new Q EZ Rubber Powered Using the same type of rigid styrene wing
Wingspan . . . . . . . . . . .290mm
Fuselage Length . . . . . .295mm
Wingspan . . . . . . . . . .485mm
Helicopter is simple to construct but material as the QT Hand Toss Glider, the
Fuselage Length . . . . .380mm new Quest Q EZ Rubber Powered Glider
Propeller Diameter . . . .152mm amazing to watch fly. Powered by a
Propeller Diameter . . .152mm
Weight . . . . . . . . . . . . . .13gms
Weight . . . . . . . . . . . . .18gms high-quality rubber band, the specially provides far better flight times than
Wing/Loading . . . . . . . . .00054
Wing/Loading . . . . . . . .00043 designed blades of the new Q EZ common "flat wing" balsa models. It even
Class Pack 35 Kits Rubber Powered Helicopter are comes with an extra rubber band.
Class Pack 24 Kits
Cat.# 19-FF-510. . . . . . . . . . $77.50 Cat.# 19-FF-501. . . . . . . . .$161.50 specially designed for amazing flights
both indoors and out! Qty $/pkg
To make 35 Delta Darts To make 24 Right Flyers Qty
1
$/pkg
$4.50
Cat# 99-9623 1 $4.50
2-5 $4.35
Individual Kits Cat.# 19-FF510KT Individual Kits Cat.# 19-FF501KT Cat# 99-9621 2-5
6-19
$4.35
$3.95
Single Kits 6-19 $3.95
20-49 $3.35
1 kit $2.90 2-up $2.75 1 kit $8.55 Single Kits 20-49 $3.35
50-up $3.10
50-up $3.10
10/pkg 10/pkg 6/pkg

100/pkg
6/pkg
6/pkg
Propeller is 152 mm and

An airplane propeller with Model plane wheels, 3” plastic 3 blade 3-9Volt Toy Motors 9Volt Battery Snaps
includes plastic nose and
2mm shaft. 150mm long. 3/4” in diameter. propeller.
bearing shaft. (used with drive
bands below)
Cat# 19-FF-380 Cat# 80-3556-00 Cat# 19-FF-931 Cat# 80-3555-00 Cat#80-3550-00 Cat#70-32-236
(for 2mm shaft motor) with 2mm shaft
$19.40 35/pkg $11.75 10/pkg $22.10 100/pkg $7.90 6/pkg $8.60 6/pkg $2.30 6/pkg
DRIVE BANDS 5 in 1 Winder PRESSURE POP BOTTLE ROCKET LAUNCHER

Use these bands with the Use this tool to quickly wind rubber motors on
propeller assembly to drive plane This launcher fires normal 2 litre PET bottles up to 40 m. Students can decorate their
our airplanes and boats. This labor saving
or other kits. The strands can be tool winds 5 revolutions on the motor for every bottles to get optimum performance. An air pressure source is required.
tied to make a loop. 1 hand crank turn.
Cat.#19-FF-370 $9.90 35/pkg Cat.#19-40-389..........$9.75 $
49.75
This rubber motor drive for Cat.# 98-5001-00
propellers is 1/8” x 48ft. It is made
of high quality rubber and can
withstand 1000 winds. Extra Stopper & Valve
Cat.#19-FF-378 $12.55 1/8” x 48’
Cat# 98-5021
BALSA WOOD $6.95 ea
SAMPLE APPLICATIONS
Balsa is a very light wood excellent for model
plane building.
Qty $/Pkg
1 $7.20
2-5 $6.65
Cat# 83-AWPKG Balsawood Scrap Bundle
6+ $5.95
Cat # 83-BWPKG Basswood Scrap Bundle
Multi Surface Blocks Slope Board Kit
Investigate how a force can slow down moving objects with these multiple surface
blocks. 10 surface blocks, 5 different surfaces, 2 each of the following surfaces; A sturdy slope to investigate forces and
sandpaper, carpet, foam, rubber and smooth wood. motion. 5 different heights and 2 slope
boards each with a different material on
each side.
NOTE: Slope Board Sold
Separately (See Above)
10 BLOCKS PER PKG. ASSORTED
Cat# 98-1120-00 . . .$71.50 Cat# 98-1130-00 . . . . . $79.50

Foam Wing Cutter
A gravity-driven adjustable-ratio mechanism guarantees a constant uniform airfoil for both straight or
tapered wings and stabilizers giving you the precision demanded by many kit manufacturers. True wire
tracking is the proprietary art that places this cutter ahead of the rest. Micro adjustable weights in
concert with the three point tracking system insures incredible results time and time again, completely
hands off.
This cutter comes complete with a 28" Fold/Bow,

hot wire retainers and a power supply
interconnect wire set. 40” FOLD/BOW and 52”
FOLD/BOW are available as an additional
accessory. All you need is a power supply and
Tri/T Laminate Material and you are ready to cut
foam wings. The cutter mounts to your workbench
with screws or to your kitchen table with masking
tape - your significant other will love that!
Table shown is not supplied, assembly required.
Cat# 80-4810-FC...$330.00
(How to DVD Included $ 80-4810FCV)
Power Supply Wing Bows

This unit powers our Hot/Wire through the
most demanding cuts with 5 amps of These bows are offered in 3 sizes of hot wire lengths -
horsepower and weighs 10 pounds. The dial 28”, 40” and 52” with a throat depth of 10”. The
is calibrated for the 28”, 40” and 52” nominal cutting lengths are 24", 36" and 48"
Fold/Bows for fast error-free setup and respectively when allowing for clearance at each end of
adjustable in between. The operation is as the material being cut. These bows come complete with
simple as flipping the master switch on and the hardware to operate with the foam wing cutter or
off for each cut. can be operated independently. Two 8 ounce
adjustable spring rod weights are included that are not
This power supply is designed exclusively for only used in the foam cutter application but also in
the Foam Wing Cutter for years of trouble independent gravity cutting operations. Each bow is
free service. Power for up to 6 feet of hot wire crafted of blue anodized extruded aluminum and is
designed to fold up after use for easy storage. Heavy
and cut Styrofoam and EPP.
duty spring rods hold tension on the hot wire and are
mounted in over size Delrin insulator bushings. Spring
Cat# 80-4810-TG,.....$296.00 rods feature screw retainers for the hot wire to facilitate
easy wire replacement.
E Each bow comes complete with an 8' roll of hot wire,

Replacement Parts wire connectors and all the hardware necessary to
operate with the wing cutter
A
To use the Bow alone: You need the Interconnect Wire
B C D F Set and a Power Supply. The Interconnect Wire Set
connects the Power supply to the Bow.
E Cat# 80-4810F28...$95.50
G
F Cat# 80-4810F40...$104.50
G Cat# 80-4810F52...$113.00
A Hot Wire
This wire is a special high tensile carbon wire used with the Foam Wing Cutter shown
above. The wire stays taut under the heat and tension demanded for precision foam
H H Laminate Material
cuts. This laminate is specially processed to eliminate chipping.
It is .018" diameter x 8' long. Temperature tempered to outperform phenolics, G-10 glass
Cat# 80-4810T37...$8.60 and other laminates. Cut the template to size with tin snips.
Then sand the edge with with a small piece of 200 sand
B Wire Connectors paper tri folded in your hand.
These hot wire retainers attach to the end of the foam bow spring rods. They feature
locking screws to attach the hot wire. Simple and convenient, the connectors are
machined from 6061-T6 aluminum with an internal diameter honed to a slip fit to the 8-3/4" x 12", 2 pieces per pack.
spring rods. Cat# 80-4810T12....$27.75
Cat# 80-4810-RH...$12.10 2/pkg (They are included with the Foam Bows.
8-3/4" x 24", 1 piece per pack.
Cat# 80-4810T24....$27.75
C Connecting Wire
Required to connect power supply to the foam wing cutter.
I Week-end Wonder DVD
Cat# 80-4810-WS....$34.70 (Included with Foam Wing Cutter)
I Want to learn how to build an all foam twin-motor RC model
in one weekend? This video will take you step by step using
D Wing Cutting DVD the Foam WIng Cutter. Cut the wing, fuselage, engine
This DVD explains the types of foam to cut and includes details of the Wing Cutter set- nacelles and tail feathers and assemble using a few pieces
up showings some tricks along the way and culminates revealing the secret of cutting a of wood as reinforcement. 3 hour construction DVD ends
curved elliptical Spitfire wing - with a straight hot wire with a beautiful afternoon flying
Runtime: 1 hour 30 minutes Runtime: 3 hours
Cat# 80-4810FCV..$34.70 (Included with Foam Wing Cutter 80-4810-FC see top of Cat# 80-4810WDV...$49.85

Hooked Mass Set Newton Push Meters Spring Scales
A set of hooked masses set in a plastic
block for storage. An invaluable item to complete
Spring scales, measured in Newtons.
an investigation into pushes and $5.50 EA
pulls. Enables the measurement
of a push in standard units.
$13.95 ea
Cat# 98-1210-00 . . . . . . . . . . . . . . . . . .0-5N

Cat# 98-1215-00 . . . . . . . . . . . . . . . . .0-10N
Cat# 98-1305-00 . . . . . . .$59.50 Cat# 98-1220-00 . . . . . . . . . . . . . . . . .0-20N Cat# 98-1240-00 . . . . . . . . . . . . . . . . .0-5N
Cat# 98-1225-00 . . . . . . . . . . . . . . . . . .0-30N Cat# 98-1245-00 . . . . . . . . . . . . . . .0-10N
Cat# 98-1230-00 . . . . . . . . . . . . . . . . .0-50N
Paper Telescope Kit Marbles Acrylic Mirror Sheets Twine

These kits are easy All mirror sheets 24” x 36” x 1/8” A lightweight twine ideal for
to assemble. The fastening materials or using with
tubing is colour pulleys. 97m long.
coded - no need to
paint. Full
instructions are A pack of 12 different sized marbles for
included with glasses experiments, especially using slopes. 12/PKG
lenses. Like real Cat# 98-1150-00 .$6.95
Cat# B-14-320 Useful as bearings when making a roundabout Cat.# Description $/Sheet
and as eyes for monsters. 100/PKG 80-0501 Smoke Mirror $46.85
$14.95 Cat# 98-1160-00. . . . . .$3.50 Cat# 19-20-551 . .$3.00
80-0503 Clear Mirror $36.40
Prisms Thin Acrylic Mirror 3” Mirror Squares

Thin plastic 1/8” thick 3mm
mirror in mirrors squares
assorted sizes. great for optics.
12 sheets of
easy to cut Qty $ea
1 $2.25
assorted sizes. 2-5 $1.96
Lens Sets Cat# LENSET . . . . . . . . . . . . $11.25 6-19 $1.68
A set of six lenses, three double concave and three 20-49 $1.40
Cat# B-14-294...$24.00 50-up $1.12 Cat.# B-14-295 ea
convex lenses with 15, 20 and 25cms focal length.
Mirror Strips to Build a Magnifier Large Dual Magnifier

Kaleidoscope This is a A large, quality
Use these mirrors along with some sequins to make a container with a magnifier with a dual
kaleidoscope. The strips are 11 3/4” x 2” . magnifier in the magnification acrylic
lid for studying lens. The large 85mm
Cardboard tube small objects or lens magnifies 2x and
not provided. animals. the small 20mm inset
lens magnifies 4x.
Form mirrors into a triangle. Use Qty

1
$/ea
$1.82
three mirror strips for best results. 2-5 $1.69
6-19 $1.57 Cat# B-14-218 ............. . .$7.60
20-49 $1.45
Cat# B-14-298 ea 50-up $1.33
Cat# B-14-214.............. $5.95
Thermometer 10 in 1 Multioptics Kit

This thermometer offers a smooth progression 10 in 1 multioptics kit
of detail on the scales to enable you to build includes:
upon skills in measurement. It has every Magnifiers, microscopes,
degree marked with a line. It is 30 cm in length monocular, telescopes,
and sold 5/pkg kaleidoscope, binoculars,
spyglass, easy to assemble,
instruction manual.
Cat# 83-7044-00 ...$12.40
-10ºC - 110ºC by 5 degrees 5/pkg Cat#B-14-300 . . . $36.00
Adaptable Learning Turbine
NEW
Renew
able
Energy
! Wind Ener gy Class
Add your
Pack
own
blades! Change gears
quickly
The ALL- Turbine is designed to be highly

adaptable and rugged for use in
classroom environments.
On this turbine you can:
• Quickly and easily change gear ratios
Wind Energy Class Pack
• Test a variety of generators A
Turbines, blade material, gears, load
• Rapidly compare different blade material for 3 stations (30 students).
designs Cat# 80-3KW5404...$397.00
• Power capacitors, water pumps, fuel
Single Turbine Kit with Loads
cells and LED bulbs Cat# 80-3KW5410...$165.00
B A-Turbine Head Parts J-CoroplastTM

You can used the plastic turbine head to attach gears and This corrugated plastic can be used for blade material.The
motors and a hub to experiment with wind generation. sheets are 4mm x 7.5cm x 40 cm . 16/pkg
Cat# 80-3KW035.......$26.35 80-1203-16....$4.95 16/PKG
B-12 Hole Hub (Fits a 2mm shaft motor) K-Propellers

This hub allows you to turn any DC motor into a wind turbine. This 3” plastic high speed propeller had 3 blades and will fit
B1 C The hub will press fits onto the shaft of a many small DC on the motor. (2mm shaft)
motors so you can easily attach your own blades and Cat# 80-3555-00....$7.90 6/pkg
experiment with wind power generation. The hub is designed
to allow you to take blades on and off very quickly and easily.
Cat# 80-3KW005........$10.85 ea L-Buzzer
This buzzer makes a loud buzzing noise to show that the
B1-12 Hole Hub with 7/64” x 6” Drive Shaft Mounted wind is generating power.
Cat# 80-3KW010 Cat# 80-3534-00...$17.95 4/pkg
D E F C-Dowel M-LED Lights
These 1/4” dowels can be used with the hub to attach the These LEDS light up when you have enough power. Sold
G H &I blade material of your choice. 12/pkg
Cat# 83-2004-02...$4.15 8/pkg Cat# 80-3514-00....$2.95 12/pkg
D-7/64” Diam. Drive Shafts N-Ultra Capacitors

These can be attached to your hub(some drilling required) to Use these as load devises. They are 3300mf and 16v. Ea
use to make blades. 6” long Cat# 80-3KW030....$3.20 EA
J Cat# 80-3KW095......$2.05 ea
O-Alligator Leads
K L M E-Gear Set These alligator leads are sold 10/pkg.
These gears can be used with the Turbine. They have a
Cat# 80-3504-00...$5.00 10/pkg
keying feature that allows them to be changed quickly and
easily. One gear fits the 2mm motor shaft.
Cat# 80-3KW065......$10.75 P-Visual Voltmeter
As more power is generated, more LEDs light up allowing
you to see the voltage output of your wind turbine as it
F-Wind Generator Motor generates power. Reads as low as .25V
These motors are smooth running and have some of the
Cat# 80-3KW110...$32.10
O highest power output at lower RPMs. EA
N Cat# 80-3KW050...$2.90 ea
Q-Digital Multimeter/Tester
G-Balsa Wood Use this digital meter to view output voltage.
Use these balsa sheets a blade material. The sheets are Cat# 80-3KW140..$19.95
3/32” by 18” long
P Cat# 83-AW404.....$8.40 6/pkg R-PVC Stand
This stand assembles quickly and is an great way to display
R H & I Water Pump & Cylinder your turbine.
Q S We use this water pump with our geared systems to Cat# 80-3KW200...$36.45
demonstrate and measure power output.This mini water
pump is suitable for a wide range of projects - from solar S-20” Box Fan
power applications to automatic watering systems to This fan has 3-speed settings and a reinforced grille for
homemade jet boats.The pump is sealed and can be fully safety and durability.
immersed in water and it operates on 2V - 6V power. Cat# 80-3KWFAN...$38.75
Cat# 80-3KW170 Water Pump..............$12.70
Cat# 80-3KW175 Graduated Cylinder.....$14.90

1400
Parts NEW
MERKUR is the best metal education sets in the world.

This top quality kit has been made in the Czech Republic
since 1920.
Project Ideas
Merkur M8 contains over 1400 parts - which include

tracks, big wheels, cock wheels, as well as a 2-speed
motor with an internal transmission, and lighting
parts. The 56-page manual gives detailed instructions
for building 100 featured models and parts. An
excellent set to inspire any child's creative genius,
and has models from beginner to advanced for easy
learning progression.
Cat# 80-STM8.......$240.00
Small Electric Motor Set

This small set is an ideal addition to bigger sets. It is
possible that you can start moving the models by the electric
motors and gears.
Cat# 80-STM2.1
$34.85
Steam Engine Models
Steam engines are fully
functional which show the
principals of a real steam
Big Electric Motor Set engine. All parts are made
The big set contains an electric motor and many wheels. You from metal, and they can be
can build differential, gearing with Cardan joint and crown used to power some
gear, gearing and worm gearing, link mechanism, reversing mechanisms built from
rotations etc. Merkur sets. Vapor goes
through pipe to kettle-drums.
Cat# 80-STM2.2 Cat# 80-STSES......$235.50

$59.50 Standard Steam Engine
Cat# 80-STSEM....$268.00
Medium Steam Engine

Primary Tool Kits Junior Intermediate Tool Kits Levers & Linkages Materials Pack
This tool kit is designed for younger This tool kit is designed for older This class materials pack focuses on
students and contains a variety of students and contains a variety of building models using levers and
selected tools and jigs for design and selected tools and jigs for design and linkages. Contains wood, glue,
make building. make building. coroplast, popsicle sticks and punch.
Cat# 83-54-1101. .$75.00 Cat# 83-54-1103-00. .$95.00 Cat# 80-54-3583-00. .$95.00
Student Double Sided Bench Hook Cordless Compact Drill Manual Hand Drill
This drill comes with a charging base, AC adaptor, four
double-ended screwdriver bits, and instruction manual.
With a slot on one side for
either 5mm or 8mm wood • 6V
and the other for 10mm, • 3/8” keyless chuck
these bench hooks are • forward reverse
switch
suitable for both left and
• lightweight,
right handed children. ergononmic design See drill bits on page 21)
The unit is 6” x 6” in size. • 2-speeds, 200-500
QTY $each RPMS
• charging base This drill has completely enclosed gears. Drill bits
1 $6.95
2-UP $5.95 can be stored in the handle. It will take drill bits up
to 8 mm . (Bits not included).
Cat# 83-1150-00 Cat# 83-1113-00........$49.50
Cat# 83-1133-00................$19.95
Double Sided Bench Hook & Paper Drill & Cutters Basswood (Jinx) Jointer
Mitre Box
A B
Designed by teachers these corner jointers have been

copied by others many times! Designed to hold wooden
For making holes in card or coroplast where an strips at right-angles and 45 degrees. Both sizes are in
This mitre box has a large working surface. The ordinary hand-held punch will not reach. Supplied packs of 10 and come with an instruction sheet.
slot holds the wood while cutting at 90 degree and with 3mm, 4mm and 6mm cutting heads.
45, and 60 degree angles. They are double sided.
A: Cat# 83-3008 8mm wood . . . . .$9.95
The unit is 13 x 8” in size . Cat# 83-1121-00 . . . . . . . . . . . . .$28.25
QTY $each
1 $16.95 B: Cat# 83-3001 10mm wood . . . . .$9.95
2-UP $15.95 Replacement Cutters
Cat# 83-1123-00 . . . . . . . . . . . . . . . . . . . . .$5.25 sold 10/pkg
Cat# 83-1124-00 . . . . . . . . . . . . . . . . . . . . .$5.25
Cat# 83-1155-00 Cat# 83-1125-00 . . . . . . . . . . . . . . . . . . . . .$5.25
10mm slot on one side and 8mm slot on the other.
Cat# 83-1158-00
10mm slots on both sides.
C-Clamp Helping Hands Soldering Stand
These all purpose clamps are
This tool holds the
useful for clamping bench hooks
wire while soldering
TTS Tools Manual to work surfaces so they don’t
with the aid of a
shift when children are sawing.
A guide to the use of tools magnifying glass. All
used in most design and make devices are
activities. Provides hints and NEW adjustable. It is a very
tips with safety notes and Cat# 80-1151-00 3” . . . . . . . . . . $4.95 handy holder
some ideas for students. Cat# 80-1153-00 4" . . . . . . . . .$5.95
Cat# 80-5700-21 . . $11.25 Cat# 80-4852-00....$7.35

QTY $ each
Pliers 1 $4.95 Screwdriver Set 6”adjustable Wrench Hammers
2-5 $4.45
6-UP $4.20
A
B
B
A C
A) Cat# 83-1141-00 . . . . . . . . . . .$4.95

Pliers with a cutting edge for wire. A set of six screwdrivers: 2 sizes A small lightweight adjustable A) Cat# 83-1105-00 . . . . . . . . . . .$4.95
B) Cat# 83-1140-00 . . . . . . . . . . . .$4.95 for three types: slothead, phillips wrench that is a useful tool to have A wooden claw hammer to be used by
A sturdy general purpose plier for wire or 6" long. older students.
and robinson.
gripping. B) Cat# 83-1104-00 . . . . . . . . . .. $9.95
C) Cat# 83-1139-00 . . . . . . . . . . ..$4.95 A mini hammer to remove small nails or
These pliers have a long flat nose for Cat# 83-1143-00 ........$12.80 Cat# 83-1144-00 ..........$3.95 panel pins. 26cm long.
getting to hard to reach places.
Needle Files Mitre & Razor Saw Desk Top Cutting Mats Deluxe Cutting Knife
If you use a knife to cut a quantity of card or

paper you will appreciate the strength and
Mitre Box (Aluminum) quality of this tool, with a set screw to keep
Cat.# 50-55665...$13.75
Cat# 83-1108-00 . . . $15.95 the blade from slipping.
These handy needle files come 12
per package in a folding pouch. Printed with a 1cm reference grid. Cat# 83-1111-00 . . . . . . .$9.95
Razor Saw Cat# 83-1111-RB..............$6.50
24" x 17" (60cm x 45cm).
Cat.# 50-55001..$12.75 RB (Replacement Blades)
Cat# 80-3008-00....$9.00
Kidder Mitre Cutter Heavy Duty Glue Gun

QTY $ each This heavy duty glue gun uses
A heavy duty, multi-purpose, hand cutter for
1 $27.00
cutting & trimming of wood, plastic, rubber full size adhesive sticks. It is
2-5 $25.20
etc. By changing anvils to fit your needs, ideal for general repairs and light
6 - UP $22.80
you can easily encounter tough jobs with industry. It is 120V with 80 watts.
20+ $21.60
ease
• Heavy duty steel body for long lasting Glue Sticks
use on tough materials.
• Super sharp forged steel blade that can
be resharpened or replaced. CSA Approved
• Five anvils for cutting flat and round
materials.
• Special coated handles for Non Slip
grip.
• ABS attaché case for easy storage and
security
Now with adjustable back stop! 8” x 7/16” 10/pkg

Cat#80-4804580
Cat.# 83-1126-00 . . . . . . .$29.95 CAT.# 80-480-208 HEAVY DUTY GLUE GUN Qty 1 $5.45
(Replacement Blades #83-1127-00 $9.80) Qty 2-5 $4.50
Stick Cutter QTY $ each Mini Economy Glue Gun

1 $5.90
This unit easily cuts balsa and up to 1/8” basswood. 2-5 $5.55 This economical mini glue gun is perfect for small craft
The clear plastic shield protects the fingers. The base 6 - 19 $5.20
20+ $4.95 projects. It is 110v with 10watts.
has 4 corner holes for mounting and a built-in Glue Sticks
protractor for angle position. The guide moves
on the protractor to cut angles easily. The
unit is 4 1/2” x 4 1/2” in size.
CSA Approved
Cat#50-105.........$16.15
4” x 5/16” 50/pkg
Replacement Blades Cat#80-4804450
Cat# 50-105-RB....$4.95 Qty 1 $5.65
Qty 2-5 $5.05
(Only the teacher
BUY BULK & $AVE
should replace the
Cat# 80-480-210 Mini Glue Gun 80-4854450
blades on this unit.) $34.00.....5 lb bag

Drill Press Vise Rotational Vice Saws/Hacksaws
B
A Two hacksaws that will cut
through wood and not through
skin! 50-235: is a basic hacksaw
with a plastic handle; 50-239:
has a lever to assist in changing
the blade. Replacement blades
Pk 10: 50-236: fine; 50-237:
medium
C
D
A vice to hold gears or wheels E
while drilling. Also fits onto a small This rotational vice is great
drill press to hold items while for holding objects so that
drilling. you can work on them at an A. 16 pt 14” Sandvik Saw D.Small Razor Saw Set.
Cat# 50-300 . . . . . . . . . . . . . . . . . . . . . . . . . .$24.00 Cat# 50-55001. . . . . . . . . . . . . . . . . . . . . . . $12.75
angle.
B. With Lever to assist in changing blade E. Hacksaw Blades, Fine PK 10
Cat# 83-1116-00 $18.00 Cat# 83-1117-00 Cat# 50-239 . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.40 Cat# 50-236 . . . . . . . . . . . . . . . . . . . . . . . . .$4.50
$22.95 C. Basic hacksaw w. plastic handle.
Cat# 50-235 . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.50
E.Hacksaw Blades Med PK 10
Cat# 50-237 . . . . . . . . . . . . . . . . . . . . . . . . .$4.50
SANDING SPONGES HOLE PUNCHES

This flexible sanding sponge is ideal
for corners and contoured surfaces. A A. Card Punch, 6mm
To clean just rinse with soap and This tool will punch any cardboard easily. Creates a hole
water and reuse. through which 3/16” dowel runs freely.
6mm Hole Cat# 83-1119-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.60
B. Very Heavy Duty Punch

This high quality eyelet punch is the superior tool
for punching holes in popsicle sticks and spatulas. It requires
B much less force than the other hole punches.
Cat# 83-1128-00 4.5mm . . . . . . . . . . . . . . . . . . . . . .$41.45
3mm + 4.5mm Hole Cat# 83-1130-00 3mm . . . . . . . . . . . . . . . . . . . . . . .$48.25
Cat.# 80-2804-00 Fine-Medium . . . .$2.40 C. Office Punch, 5mm

Cat.# 80-2805-00 Medium Coarse . .$2.40 A lightweight punch for use with light cards.
Cat# 83-1122-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.10
Cable Ties C 5mm Hole
Sandvik Hobby File Coping Saw This professional quality coping saw has
a sturdy steel frame. Blade tension is
This File has rasp cut for achieved by turning the wood handle.
rough filing of wood, plywood Easily adjustable blade fixtures and an
and soft plastics and double $21.95 Each extra narrow specially hardened blade
cut for filing hard plastic, steel 2 for are among the features. The blade has 5
and formica. This is our best $20.65 Each points per inch. Cat# 50-303 Repl.
multi-purpose file. The length Qty $/Pkg Blades 5/pkg
is 8” (20 cm). 1 $18.65 Qty $/Each
This a pack or 650 assorted cable ties
in various sizes. 2-+ $17.65 1 $5.85
CAT.# 50-152 CAT.# 50-301
Cat# 83-1717-LG . . . . . . $14.60 2+ $5.70
F Safety Goggles and Glasses Scissors

These scissors have a rounded end for extra
A safety and are suitable for cutting paper, fabric
B A and card.
C
B C
Cat# 83-1145-00 ...$4.65
D
Safety Snips
A & B PRICES
QTY $ /PKG
1 $3.50
E Self-adhesive axle 2-5 $3.20
holders.
A) Cat# 80-3221-00 Kids Goggles 6-19 $3.05
160/pkg w 5mm hole 20+ $2.75
B) Cat# 80-3219-00Adult Goggles
A) Cat# 83-1711 Double Sided Sticky Tape . . . . . . . . . . . . . .$9.00
C PRICES
B) Cat# 83-1712 Masking Tape . . . . . . . . . . . . . . . . . . . . . . . .$2.50
QTY $ /PKG
C) Cat# 83-1713 Double Sided Foam Tape . . . . . . . . . . . . . . .$1.50
1 $4.95
D) Cat# 83-1708 Self-Adhesive Axles Holders . . . . . . . . . . .$11.25 C) Cat# 80-3229-00 Glasses
E) Cat# 83-1716 Velcro 10m . . . . . . . . . . . . . . . . . . . . . . . . . .$24.90 2-5 $3.95 Useful snips for card, coroplast and even
F) Cat# 83-1718 Self-Adhesive Sticky Pads . . . . . . . . . . . . .$12.95 6-19 $3.50 electrical wire. These snips are sharp and
have a safety catch.
20+ $3.20
Cat# 83-1142-00 . . $7.80

Acrylic Sheets Assorted Off-Cuts of Acrylic
24” x 36” (69 x 91 cm) This package of acrylic has various coloured sheets. The
thickness is mostly 1/8” - 1/4” (3-6 mm)and sheet sizes
in Various Colours are mostly 2’ x 3’ (69 x 91 cm) and generally masked.
This is an economical way to buy your acrylic.
2’ x 3’
Mostly heets! Fabrication
ds
maske Manual
See page 41
Cat.# Desc. $/Bundle

Qty $/Sheet 80-0703 75 lbs $275.00
Cat.# Colour Thickness 1 2-5 6+ 80-0702 50 lbs $190.00
ASSORTED OFFCUT BUNDLES 80-0701 25 lbs $0100.00
80-0101 Clear 1/8” (3 mm) $22.70 $21.90 $20.65
80-0103 Clear 3/16” (4.5 mm) $28.20 $27.35 - Buy Bulk And $ave Mirror Sheets
80-0104 Clear 1/4” (6 mm) $36.70 $35.80 - All sheets are 24” x 36” All mirror sheets 24” x
80-0301 White 1/8” (3 mm) $27.55 $26.20 $24.85 36” x 1/8”.See 3”
square mirrors on
80-0303 White 1/4” (6 mm) $42.55 $40.05 $38.70 page27.
80-0307 Smoke 1/8” (3 mm) $27.60 $26.25 $24.95
80-0309 Smoke 1/4” (6 mm) $42.55
80-0312 Red 1/8” (3 mm) $38.40 $35.95 $34.20
80-0314 Red1/4” (6 mm) $52.50 $49.45 -
80-0317 Florescent Red 1/8” (3 mm) $44.80
Cat# Qty Colour Thickness Price
80-0322 Green 1/8” (3 mm) $38.40 $35.95 $34.20 80-5401 12 Your Choice 1/8”(3mm) $395.00 Cat.# Description $/Sheet
80-0324 Green 1/4” (6 mm) $49.75 - - 80-5402 6 Your Choice 1/8”(3mm) $205.00 80-0501 Smoke Mirror $46.85
80-5414 6 Your Choice 1/4”(6mm) $298.00 80-0503 Clear Mirror $36.40
80-0372 Florescent Green1/8”(3 mm) $40.70 $39.00 -
80-0327 Blue 1/8” (3 mm) $38.40 $35.95 $34.20 BULK BEAD CHAIN & CONNECTORS
80-0329 Blue 1/4” (6 mm) $49.95 - - Buy bulk and save costs. This chain
comes in spools of 100’. You can
BULK BEAD CHAIN
80-0332 Yellow 1/8” (3 mm) $38.40 $35.95 $34.20 Cat.# 80-4217
purchase connectors to make your own Qty $/spool
Nickel Bead Chain 100’ Sp
80-0334 Yellow 1/4” (6 mm) $49.75 - - 1 $31.90 Cat.# 80-4219
80-0337 Trans. Amber1/8”(3 mm) $38.40 $35.95 $34.20 2-up $30.30 Brass Bead Chain 100’ Sp
80-0342 Orange 1/8” (3 mm) $38.40 $35.95 $34.20

80-0344 Orange 1/4” (6 mm) $52.50 $49.45 - CONNECTORS
Qty $/spool Cat.# 80-4218
80-0347 Black 1/8” (3 mm) $31.95 $29.90 $28.45 Nickel Connectors 100/pkg
1 $3.95 Cat.# 80-4220
80-0349 Black 1/4” (6 mm) $49.95 $46.90 $45.50 nickel 2-5 $3.75 Brass Connectors 100/pkg
80-0369 Purple 1/8” (3 mm) $43.65 $40.90 $39.00 & brass

80-0501 Smoke Mirror1/8”(3 mm)$46.85 $45.30 $42.75
Corrugated Plastic
80-0503 Clear Mirror1/8” (3 mm) $36.40 $35.35 - The name Coroplast™ applies to a wide range of extruded twinwall plastic sheet products
produced from a high impact polypropylene copolymer. This corrugated plastic sheeting is
We may substitute equivalent colours when out of stock. excellent for making small science projects. It is light, inexpensive and easy to use.
$4.65 ea Cat Colour

Engraving Stock 80-1247-00
80-1227-00
Black
Blue
80-1222-00 Green
This 2 ply engraving stock is perfect for sign making or 80-1201-00 Natural
CNC milling. The package comes with 6 sheets 12” x Sideview
80-1212-00
80-1203-00
Red
White
24” (30 cm x 60 cm) assorted colours. 80-1232-00 Yellow
Cat# 80-5425-00...$64.00
6 Assorted Sheets
Sheets are 24”x 32” and 4mm thick.

Scott Newton 7 Sheet Assorted Pack Project Idea from Rainbow
Supervisor Cat #80-54-1200 $28.00
Technology Book 80-5739
(Kidder chooses the colours)

Plexweld “F” Solvent Olfa Heavy Duty Cutter
Capillary cementing with This professional cutter comes complete with a two sided tungsten carbide
A
Plexweld ‘F’ is an easy method of blade. The excellent grip handle offers ease in production and multiple
use. Just score and snap.
joining two pieces of acrylic.
Finish the edges to a satin finish
B stage. Remove partially the
masking. Hold pieces together
Olfa Cutter Replacement blades
by using vertical support. Apply Cat. # 80-3209-RB $5.90/3 pack
Plexweld ‘F’ to inside corner with
Cat.# 80-3209-00...$11.95
applicator.
A. Cat.# 80-3401-GN B. Cat.# 80-3401-QT Edge Scraper Cutting Tool
4 Litre Tin 1 Litre Tin This unique tool features four Hardened steel blade scores and cuts
$59.50 $16.60 functions in one. Not only will it acrylic up to 1/4" thick. Swivel blade folds
remove saw marks from flag edges, away safely for storage, yet stays in place
The book Working with Acrylics may be useful.
it also bevels thick and thin material when scoring. Simply score material and
and will radius the edge quickly and break along the straight line.
Applicator for Plexweld evenly.
This squeeze type applicator is excellent for solvents such CAT.# 80-3206
as Plexweld ‘F’. It allows you to apply a very fine line of
solvent. The long needle tip also allows you to get in to aaQTY $ each
hard-to-get places. Bottles are 2 ounce and the needles are 1 $3.70
2-5 $3.10 CAT.# 80-3205-00
25 gauge.
6 - up $2.75
ZQTY $ each QTY $ each
1 $3.70 1 $12.25
2-5 $3.40 2-up $11.20
6-up $3.10 Cat.# 80-3405-RN
Replacement Needles
Cat.# 80-3405-00 2 oz applicator
Thickened Cement Plastic Polish Drill Bits

A clear syrup cement for & Scratch
joining acrylic to acrylic Use to remove scratches or edge for Acrylic
where high strength joints polish acrylic plastics. Kit contains
are needed. Rapid 1/2 oz bottle of 20/20 Plasti-Polish, & Wood
setting, overnight cure 1/2 oz bottle of 20/20 Plasti-
formulation in an easy to Cleaner, polishing cloth, sanding These drills are especially
block, 150 and 600 grit sandpaper $ each
and polishing instructions. Cat.# Size 1 . 2-up . recommended for drilling
Ideal for Gluing most 80-3210 1/8” (3.2 mm) $003.40 $03.20
QTY $ each acrylic plastic and most
types of plastic. 80-3211 5/32” (4 mm) $004.05 $03.80
1 $9.25 other types of plastic. They
2-5 $8.80 80-3212 3/16” (4.8 mm) $004.75 $ 4.50
QTY $ each
6 - up $8.35 80-3213 1/4” (6.4 mm) $006.80 are made of high speed
1 $8.20
80-3214 5/16” (8 mm) $ 09.10 $08.55 steel and are sold
2-5 $7.80
80-3215 3/8” (9.5 mm) $012.85 $11.80
6 - up $7.20 individually.
80-3216 7/16” (11 mm) $017.70 $16.25
80-3217 1/2” (13 mm) $ 20.80 $19.60
Cat.# 80-3404-00 2 oz CAT.# 80-3413-00
Plastic-Polish Safety Glasses Safety Goggles Sabre Saw Blades

Specially formulated for the removal of These glasses have tough side These blades are especially
fine scratches, haziness and abrasions General purpose goggles are designed for sawing acrylic plastic.
shields, brow and nose bridge and important when working with any
from most plastic surfaces. After one piece construction. They are There are 2 blades per package,
equipment and a good safety one for sawing thin gauge material
polishing, use 20/20 Plasti-Cleaner to offer excellent comfort, strength feature to stress with students. the other for 3/16” or thicker.-
restore surface to a bright, shiny and stability
CAT.# 80-3229-00 EA
CAT.# 80-3204-00 2/PKG

QTY $ each QTY $/PKG
1 $10.00 1 $3.50
2-5 $9.25 2-5 $3.20
6-19 $3.05
Qty $/Each QTY $ each
Cat.# 80-2215-00 20+ $2.75
1 $4.95 1 $4.95
200 ml 2-up $3.95
2-5 $3.95
6+ $3.50
CAT.# 80-3219-00

Solid Acrylic Rod Clear Acrylic Hinges Clear Acrylic Domes
36” (91CM) LONG
AR
CLE $/Pkg .
Cat.# Diameter Pkg Size 1 . 2+ .
80-1701 3/8” (9 mm) 100/pkg $16.00 $14.00
80-1702 1/2” (13 mm) 100/pkg $22.40 $19.60
$/Length CAT.# 80-4247 2/PKG 80-1703 3/4” (19 mm) 050/pkg $35.65 $33.75
Cat.# Diameter Length 1 . 2-5 . 6+ .
80-0901 1/8” (3 mm) 36” (91 cm) $0.54 $0.50 $0.36 Use these hinges with all types Qty $ /pkg
80-0902 1/4” ( 6 mm) 36” (91 cm) $1.26 $1.16 $0.84 of acrylic. Simply solvent Clear Acrylic Spheres
1 $2.90
80-0903 5/16” (8 mm)36” (91 cm) $1.80 $1.65 $1.20 cement in place with 2-5 $2.65
80-0904 3/8” (9 mm) 36” (91 cm) $2.60 $2.40 $1.74 “Plexweld “F”. No drilling, 6-19 $2.40
80-0905 1/2” (13 mm)36” (91 cm) $4.25 $3.90 $2.80 Tapping or mechanical 20-49 $2.15
80-0906 5/8” (16 mm)36” (91 cm) $8.35 $7.55 $5.60 fastener required. 50+ $1.92
Dimensions are 1 1/2” x 1 $/Pkg .
ACRYLIC TUBING Clear Piano Hinges Cat.# Diameter Pkg Size 1 . 2+ .
80-1501 1/4” (6 mm) 100/pkg $06.40 $05.95
1/16” WALL 36” (91CM) LONG 1.75” This hinge is made from 80-1502 3/8” (9 mm) 100/pkg $15.30 $13.40
high strength resin for 80-1503 1/2” (13 mm) 100/pkg $27.00 $23.65
superior strength. It is 80-1504 3/4” (19 mm) 025/pkg $17.05 $15.60
AR
CLE
solvent cementible for easy
fabrication. This hinge can Clear Acrylic Cubes
be cut to size.
CAT.# 80-4252-00
$/Length
Cat.# Diameter Length 1 . 2-5 . 6+ . Qty $ Each
80-1102 1/4” (6 mm) 36” (91 cm) $1.17 $1.07 $0.78 1 $4.50
12”
80-1103 3/8” (9 mm) 36” (91 cm) $1.62 $1.49 $1.08 2-5 $4.25 $/Pkg .
80-1104 1/2” (13 mm)36” (91 cm) $2.90 $2.65 $1.92 6-19 $4.15 Cat.# Diameter Pkg Size 1 . 2+ .
80-1105 5/8” (16 mm)36” (91 cm) $2.60 $2.40 $1.74 20-49 $4.00 80-1901 1/2” (13 mm) 25/pkg $08.00 $07.00
80-1106 3/4” (19 mm)36” (91 cm) $4.50 $4.15 $3.00 50+ $3.75 80-1902 3/4” (19 mm) 25/pkg $15.75
80-1107 1” (25 mm) 36” (91 cm) $6.10 $5.60 $4.10 80-1903 1” (25 mm) 10/pkg $13.00
SOLID SQUARE ROD Hot Air Pistol Heat Gun

36” (91CM) LONG
This heat gun includes a 9 piece
accessory kit for all your plastic
AR forming needs. It has 1500 watts
CLE and is 120V. It reaches a
temperature of 500°C.
$/Length
Cat.# Diameter Length 1 . 2-5 . 6+ .
80-1002 1/2” (13 mm) 36” (91 cm) $05.30 $04.25 Cat# 80-4836-00...$31.30
80-1004 3/4” (19 mm) 36” (91 cm) $10.55 $09.50
80-1006 1” (25 mm) 36” (91 cm) $16.95 $14.75
Buffing Wheels Buffing Compound

These high quality buffing
wheels can be used on a bench
Fig A High Gloss Compound
press or grinding wheel arbour. For a highly polished final glass finish
use this high gloss compound with the
sewn buffers.
ARBOUR ADAPTER Cat.# 80-2202-00....$7.90
This 5/8” arbour adapter fits
1/2” motor shaft.
CAT.# 80-2210 Fig B Fast Cutting Compound
$15.00 EA For a clear polished finish on cut
edges of acrylic sheets, apply
Cat.# Description Diam. & Thickness Total Ply Sections Price . compound on loose buffer (80-2203).
80-2203 School Buffer 8” (20 cm), 1 1/2” (4 cm) 108 6 $43.50 Wet sand first with durex abrasive.
80-2204 School Buffer 6” (15 cm), 1 1/2” (4 cm) 108 6 $14.00 Cat.# 80-2201-00....$10.00
80-2205 Soft Flannel Polisher 8” (20 cm), 1 1/2” (4 cm) 45 3 $19.85
80-2206 Sewn Buffer 8” (20 cm), 3/4” (2 cm) 54 1 $14.90 A B
80-2207 Sewn Buffer 6” (15cm), 3/4: (2cm) 54 1 $12.00

Stripheaters for Bending Acrylic
This heavy duty stripheater is designed to place a narrow strip of heat on an acrylic plastic sheet until it is soft and pliable
enough to bend to the desired form. It is capable of heating sheets up to 1/2” thick.
• 110 volts
• thermostatically controlled
• EMX-1 500 watts
• EMX-2 625 watts
• pilot light with on/off switch
• CSA Approved
• sturdy sheet metal construction
• maximum temperature 450ºf
MODEL EMX-1 MODEL EMX-2

$278.00 $324.00
CAT.# 80-4814-00 CAT.# 80-4816-00
Straightline Benders Multi-Tray Heating System

These free-standing heat trays are designed to give constant This system prepares
professional bends while working with all types of thermoplastic materials for
Thermoplastic materials. It is capable of heating up to 1/2” forming all-angle bends
reducing fabrication time.
thick material. They run on standard 120 volt and have a Unit has independently
maximum temperature of 800º f (426ºC). operated and moveable
HEATED LENGTH heating trays. Units are
completely self-contained
and require no special
wiring.
1/2” & 1/4” GAP
4 X POWER CONTROL
CAT.# HEATED LENGTH/WIDTH PRICE

25-0FS-24 24” / 1/2” GAP $375.00
25-0FS-48 48” / 1/2” GAP $472.00
25-0FS48/4 48” / 1/4” GAP $490.00 • Dimensions: 62” wide x 54” depth x 5” height
• 48” wide x 48” depth working area
25-0FS-72 72” / 1/2” GAP $702.00
• approximately 68 lbs.
25-0FS-96 96” / 1/2” GAP $761.00 • 1 3/4” center to center closest parallel bend
POWER CONTROLS Complete System

These controls supply infinite control for AC
Cat.# 25-048-48E 1/2” Heat Gap 1/8” & thicker material $2,902.00
power over the full range of input voltage.
Adjustment of the input voltage accomplishes Cat.# 2548-48E/4 1/4” Heat Gap .100” & thinner material $2,939.00
precise control, allowing exact matching of
power to load requirements. 10 amp/120 volt. Cat.# 25-0FS-48T Extra Heating Tray for above $472.00
POWER CONTROL CAT.# 25-0AEC-15 15AMP $392.00

MINIMOLDER™ Injection Moulder from
GST # 28 198 442,A BN # 58 858 751135,Div.ofP & F Ltd.
This easy to use Injection Moulder is portable and easily bolts to a

sturdy bench. It is ideal for Education, Model-Making and
Prototyping. You can make one item or100’s of items. The digital Cat# 75-MINIMLD
heat controller is tamper proof and the unit is silent. $
3600.00*
Education *Includes: All materials to get
• See the entire process NEW started, 10 assorted coloured
powder, and all tools, oil,
• Control what is happening - every step of the way instructions with tutorial.
• Computer display available (Factory fitted option)
• Standard moulds available - Succeed first time
• Low cost of materials
Model-making & Prototyping

• Use TechSoft "Bolsters" to use inserts for easy mould making
• Plugs into household 3 pin electrical outlet - no special wiring required
• No external compressor or hydraulic pump required
Specifications
• Electrical Supply: 110V a.c. or 230V a.c. Version, 400W
• Safety: Compliant Hydro Approved
• Mass: 28kg (62lb)
• Dimensions: Width: 250mm (10"), Depth: 420mm (16.5"), Height
670mm (26.5") (excluding handles)
• Robust powder-coated steel and aluminum construction
• Comes complete with Mould Bolster with 3 inserts, manual, operation
poster, sample pack of material - ready to go in minutes
See page 39 for more

moulding ideas.
Paper Clip Mould Pg 39 Level One Supplies

Includes:
1 x 10cm Square Mould System (pg 39)
1 x assorted polyethylene powder in various
colours (approx 24 lbs)
Cat# 75MINI-SUS....$595.00
75MINI-MQX...$295.00
10cm Sq Mould without Plates
PRIMARY™ Thermoformer from
GST # 28 198 442,A BN # 58 858 751135,Div.ofP & F Ltd.
This fast, silent, easy to use unit is ideal for ages 6 and up. It is portable and easy to set up on a sturdy
bench. It is ideal for Education and Model Making
Cat# 75-PRIMARY
Education
• Watch the entire process - your work is not hidden
$
1495.00*
under another part of the machine *Includes startup
• Control what is happening - every step of the way supplies, tutorial
• Succeed first time instruction manual,
• Minimal cost of materials
sheets.
Model-making
• Form over almost anything from fruit to plaster to
wood to metals - even ice
• Plugs into household 110V outlet - no special wiring
required
• No external compressor or vacuum pump required
Specifications
• Electrical Supply: 110V a.c. or 230V a.c. Version,
880W
• Safety: Compliant Hydro Approved
• Mass: 12kg (27lb)
• Dimensions: Width: 250mm (10"), Depth: 500mm
(20"), Height 400mm (16")
• Sheet size: 265mm (10.5") x 215mm (8.5")
• Robust powder-coated steel and stainless steel
construction
Level One Supplies
• Comes complete with manual, operation poster,
Includes:
sample pack of material - ready to go in minutes.
1 x mould
75 x assorted sheets
Cat# 75PRIM-SUS....$295.00
See moulds and accessories

on page 39.

Accessories for the 75-MINIMLD Injection Moulder
Precut 10cm Sq Precut 10cm Sq Precut 10cm Sq Custom Cut

Key Fob Rack Gear Circle Letters 10cm Sq
Cat# 75MINI-MKF Cat# 75MINI-MRG Cat# 75MINI-MCL Cat# 75MINI-MLE
$225.00 $225.00 $100.00 $225.00
Fig 1
Fig 1...Extra plates and

Basic 10cm Square Mould System custom cuts are available
with Plates and Maple Leaf Paper Clip Mould
in various thicknesses .
75MINI-MPC
Cat# 75MINI-MQR...$450.00 Please call for pricing.
$225.00
Project
Ideas Maple Leaf Plate Ready Made Moulds from TechSoft
75MINI-MML
$225.00
Polyethylene Powder (pre coloured) Cat# Colour

1 kg bags of polyethylene powder for using
with the 75MINI-MLD. $12.95 1kg Bag 75PE1KG-BK Black
75PE1KG-BU Blue
$12.95/1 kg Bag Screwdriver Mould Golf Tee Mould Ball Mould
75PE1KG-GR Green 75MINI-MSD 75MINI-MT 75MINI-MBL
75PE1KG-MA Magenta $300.00 $410.00 $300.00
75PE1KG-OR Orange
75PE1KG-PU Purple
75PE1KG-RD Red
75PE1KG-SI Silver
75PE1KG-WH White
Special Assorted 5 kg Pkg Spintop/Wheel Kit Worm Gear Insert Gear Mould Insert
75PE1KG-YE Yellow 75MINI-MST 75MINI-MWG 75MINIMSK
#75PE54AST..$60.00
$225.00 $250.00 $275.00
Accessories for the 75-PRIMARY Thermoformer

Polystyrene Sheets
These sheets are 8.5” x 10.5” .020” thk and
are used with the 75-PRIMARY
Thermoformer.
Cat# Colour 1 2-5 6-19 20-49 50+
Hummingbird Flying Duck Viking Ship Lion 75V020PFBK Black 1.90 1.80 1.60 1.50 1.35
75-FM-75 75-FM-10C 75-FM-13A 75-FM-3
75V020PFBU Blue 1.90 1.80 1.60 1.50 1.35
$43.90 $27.95 $22.00 $35.90
B Chassis 75V020PFGR Green 1.90 1.80 1.60 1.50 1.35
A Shell 75V020PFRD Red 1.90 1.80 1.60 1.50 1.35
75V020PFWH White 1.90 1.80 1.60 1.50 1.35
Special 50 Sheet Assorted
75V.5CLRPF* Clr.5mm .61 .58 .54 .53
Colours and Clear
75V54PFAST...$57.00 75V.8CLRPF* Clr .8mm .86 .81 .76 .74
Car Moulds Eagle Dog Card Holder * Clear sheets are the most popular choice
A)75-FMBZ-33 75-FM-KE 75-FM-8 75-FM-105
B)75-FMBZ-06 $45.00 $33.90 $49.90
$55.00 & 28.90
Lifting Platform Balloon Inflator
Accessories Cat Price
N/S Electronic Timer - fits to side of machine for accurate forming, every time Ca# 75PRIM-ET $15.95
N/S Energy Saver - get the most from transparent material Ca# 75PRIM-ES $20.95
N/S Forming Simulator - try your forming, without wasting material Ca# 75PRIM-FS. $8.00
FIg 1 Lifting Platform - use the air outlet port to lift a person Ca# 75PRIM-LP $98.00 Fig 2
Fig 2 Balloon Inflator..use the air outlet port to inflate a balloon Cat# 75PRIM-BAI $65.00 Fig 1

Design and Make Folios
This is a series of 10 photocopiable booklets for teachers that cover many aspects of technology education. The folios contain a wealth of information for
the elementary classroom focusing on the “Jinks construction systems” pioneered by David Jinks. Each folio is based on his successful professional
development courses for teachers. These are the definitive books to help all teachers in the field.
Technology in Perspective . . . . . . . . . . . . . .Cat# 8057JINK01

Tools and Materials . . . . . . . . . . . . . . . . . . .Cat# 8057JINK02
Box Modeling . . . . . . . . . . . . . . . . . . . . . . . .Cat# 8057JINK03
Frames and Structures . . . . . . . . . . . . . . . . .Cat# 8057JINK04
Making Things Move . . . . . . . . . . . . . . . . . .Cat# 8057JINK05
Mechanisms 1: Pulleys, Winches, Cams . . .Cat# 8057JINK06
Electric's . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cat# 8057JINK09
10 BOOK SET Mechanisms 2: Gears, Belts, Conveyors . .Cat# 8057JINK07
Cat# 805457JKAL Computer Control . . . . . . . . . . . . . . . . . . . . .Cat# 8057JINK10
$145.00
Mechanisms 3: Levers, Hinges, Fluidics . . .Cat# 8057JINK08
$15.95 EA Complete set of 10 Books . . . . . . . . . . . . .Cat# 805457JKAL
Simple Mechanisms Poster
Hang it in your classroom.
80-5700-28...$2.95 ea
Science & Technology Activities Resources

Grade 1 to 8 (available in English & French)
100% curriculum-based • Hands-on • Minds-on • Real World Connections
STUDENT RESOURCE consists of hands-on activities based on the Ontario
Ministry of Education and Training expectations, text with Canadian content, and
full-colour illustrations.
The student journals have and introduction with background information. The
investigation section involves the students in exploring the topic using skills of
inquiry and/or design. The storyboard summarizes the concepts developed. The
teachers guide provides “more to do” to extend the investigation. It also shows
curriculum connections with other curricula. Generally, all student resource books
are $8.95 (price varies from $6.00 - $10.95)
TEACHER’S GUIDE consists of background information, support for student

activities, rubrics and other assessment strategies, blackline masters, and glossary
of terms. $25.50/ea
GRADE 1 GRADE 2 GRADE 3 GRADE 4 GRADE 5 GRADE 6 GRADE 7 GRADE 8

Matter and Objects & Liquids and Magnetic and Light and Matter Air and Substances Fluids
Materials Material Solids Charged Materials Sound Flight and Mixtures
Teacher Cat# 8057G-1025 Cat# 8057G-1027 Cat# 8057G-1029 Cat# 8057G-1031 Cat# 8057G-1033 Cat# 8057G-1035 Cat# 8057G-1069 Cat# 8057G-1071
Student Cat# 8057G-1026 Cat# 8057G-1028 Cat# 8057G-1030 Cat# 8057G-1032 Cat# 8057G-1034 Cat# 8057G-1036 Cat# 8057G-1070 Cat# 8057G-107
Energy and Energy in Our Energy from Forces and Light and Conservation Electricity Heat Optics
Control Lives Wind and Water Movement Sound Energy of Energy
Structures and Everyday Movement Stability Pulleys and Forces Motion Strength and Mechanical
Mechanisms Structures Gears Stability Efficiency

80-5700-04 80-5739-00 80 -5737-00 80-5700-05 80-5700-65
Design and Make Rainbow Technology Design & Make It Techniques Cardboard Engineering
Activities Resistant Materials for Technology Source Book
This book provides 104 This book has been written by
A photocopiable resource that A photocopiable resource
photocopiable sheets in 12 a team of classroom teachers.
contains 12 indexed sections to book from Flying Pig. The
sections, accompanied by It contains a mixture of This book contains ideas,
cover Science and Technology book centres around ten
design and make project work. teacher’s notes and extended projects, focused hints and tips and challenges
extendable cardboard
Full of ideas, challenges and technological challenges. tasks and activities which for the student new to design
engineering projects which
hints and tips. Subjects covered Subjects covered are electricity, together with the key points and make Technology.
introduce many mechanisms,
include levers, electricity, structures, motor, pneumatics, support NEAB syllabus. It has syllabus. It has 144 pages. from simple cams to crank
hydraulic, simple photography, fastening, 144 pages. sliders and swash plates.
machines,alternative energy construction and much more.
and much more.
(TTS#80-5700-04
Cat# TTSDMBOUND). . . . . $39.70
Cat.# 80-5739-00 . . . . .$35.95 Cat# 80-5700-05 . . . $24.95 Cat# 80-5700-65 . . . .$41.60
Cat.# 80-5737-00 . . . $36.90
80-5742-00 80-5732-00 80-5700-03 80-5733-00 80-5700-35
Technology Key Stage 1 Technology Key Stage 2 TEACHING TECHNIQUES Design & Make it! Design and Make
BOOK Graphic Products Activities Book
Well illustrated projects using The aim of this book is to Building Structures
Each activity in this book This book contains new and
basic material including wood provide teachers with practical
contains a teachers page and This book contains information
structures, pulleys and ways of tackling technology in extended ICT/CAD-Cam
photocopiable student pages. on the safe use of tools, and an
hydraulics. For ages 5-7 the classroom. It is aimed at content
Focus is on open ended introduction to popular
although excellent for up to children 7-11 years in age. It is problem solving using moving
materials. There are many
grade 8 level. New for ‘99. written by T. Gadd and D. models.
activities on building and testing
Morton and has 152 pages.
strength design. It also
includes many helpful
techniques.
Cat.# 80-5742-00 . . . . $35.95 Cat# 80-5700-03 $13.05

Cat.# 80-5732-00 . . . . $34.75 Cat.# 80-5733-00..........$35.95 Cat.# 80-5700-35.........$18.20

80-5700-02 80-5700-01 80-5700-11 80-5700-10 80-5700-14
The Inventa Book of The Inventa Book of MOVE IT MOVE IT FURTHER MOVE IT
Structures Mechanisms with Water and Air with Air or Water with Levers
An excellent resource for This book explores the This book gives a history of A book of ideas for students to
teachers to gain some valuable development and concepts An introductory book design for pneumatics and hydraulics, real use materials and explore
insight into structures. This involved in a range of basic primary and junior students. The life applications and introduces models that incorporate levered
ideas, hints and tips provide a mechanisms.
book uses illustrations to mechanisms including pulleys, control valves
explain concepts in a way that gears, levers and ramps. It resource for making movement
is clear, straight-forward and uses clever cartoons and using syringes and balloons.
easy to understand. illustrations to describe some
complex concepts in an
accessible manner.
Cat.# 80-5700-02 . . . . .$29.95 Cat.# 80-5700-01 . . . . . $29.95 Cat.#80-5700-11 . . . . . $10.95 Cat.# 80-5700-10 . . . . . $18.90 Cat.# 80-5700-14 . . . . . .$9.95
(TTS#TLEV)
80-5758-00 80-5793-00 80-5792-00 80-5740-00 80-5769-00
Doc Fizzix Mousetrap Pinewood Derby Designs Pinewood Derby Speed Electric Gadgets Electric Mischief
Racers & Patterns Secrets & Gizmos
Kids are naturally curious. They Electric Al shows kids how to
love to build stuff and projects Build the coolest car in the This book has hundreds of Make your own battery powered make their very own electric
that involve cars will entertain pinewood derby. This guide colour photographs, and clear car, electric fan, remote control back scratcher, illuminated fork
children for hours. In this guide provides 34 amazing patterns diagrams and illustrations. The boat, communications buzzer. and more kooky creations using
written by a Teacher-of-the-Year and designs along with step-by- step-by-step instructions 48 colour pages. Ages 9+. step-by-step instructions and
winner, your kids will learn how step instructions for building a enable readers to build the car easy-to-follow illustrations.
to construct race cars from High-Wing Racer, a Stock Car body, prepare the axles and Features information on battery
ordinary, affordable household and a Vintage Racecar. improve the wheels with connections and switches as
materials, while learning the minimum tools. well as lots of ideas for building
science behind how they work, on the basics.Projects include
in language easy enough for a electric dice, a bumper car, a
7th grader to understand. noisemaker and much more.
Cat.# 80-5793-00..........$14.55 Cat.# 80-5792-00 . . . . .$14.55 Cat.# 80-5740-00 . . . . . . $7.95 Cat.# 80-5769-00 . . . . . .$8.25
at.# 80-5758-00 . . . . . $15.95

80-5746-00 80-5705-00 80-5755-00 80-5700-06 80-5700-17
ROCKETS Fabrication Manual Model Rocketry Teaching DATA HELP SHEETS The Electricity Book
A Teacher’s Guide with Guide
Activities in Science, An invaluable aid for the busy
Mathematics, This excellent fully illustrated An introductions to simple
“how to” book for working on teacher. These help sheet circuits and making your own
and Technology
contain teacher’s notes with lots
This manual is loaded with acrylic plastic has sections on This science guide for teachers switches with plenty of
of sketches showing process
information on the history of bending, cutting, sawing, covers the basics of model illustrated examples to
and techniques. Each sheet
rocket and rocket principles. It shaping, moulding, polishing, rocket flight. It discusses stimulate classroom activities,
deals with a theme and
has several activities some of turning, and much more. It is stability, centre of gravity and including bulbs, motors,
suggests ideas, tasks and
which are Rocket Racer, written by Craftics and has 48 buzzers and batteries. 20
centre of pressure relationships, activities for it.
Newton Car, Bottle Rocket
pages. aerodynamics, Newton’s laws of pages
Launcher, and Balloon Staging.
motion and other important
It also lists suggested readings.
It is compiled by NASA. topics.
Cat# 80-5746-00 . . . . .$19.90 Cat.#80-5755-00 . . . .. . .$8.95 Cat# 80-5700-06 . . . .$13.00 Cat# 80-5700-17. . . . . .$10.50
Cat.# 80-5705-00 . . . . . . . .
70-1479-00 70-1444-00 70-1492-00 70-1499-00 70-1496-00
Making Toys that Teach Learn to Turn Turning Pens and Pencils WIldlife Designs All New Woodworking for
Learn to Turn is a woodturning Original Patterns for your Kids
The definitive guide to turning Favorite Craft
These toys are not just fun for book for true beginners. If
writing instruments. Projects Sue Walters offers 30 dynamic
kids, they also teach basic you’ve considered trying Anyone can build terrific
show a wide variety of North American wildlife designs
motor skills, colour matching, woodturning—but have been woodworking projects if you
techniques to suit your abilities and 10 border designs. Whether
organizing by size and shape, intimidated by other books have the details and inspiration
and tools. Tips and tricks reveal you're a novice exploring a new
and problem solving. They will available on the subject—you’ll and some occasional help from
which jigs and fittings increase craft or an experienced artisan
provide hours of creative find artist and author Barry and adult friend. This book has
efficiency. An impressive bonus working in your favorite medium,
enjoyment for any child. Step- Gross puts the fun back into 40 fun projects with step-by-
gallery of finished items these unique designs and easy-
by-step instructions, with turning with this approachable steps for children. Details & info
includes: to-follow instructions will guide
detailed photos and drawings, and enjoyable guide. to build everything from a
you through the process of
make it easy for anyone to simple box to a beautiful
creating realistic or stylized
make toys that will be treasure sculpture.
images of wildlife.
for generations to come.
Cat.# 70-1479-00 $24.95 Cat.#70-1444-00 .........$23.95 Cat.# 70-1492-00.........$19.95 Cat.# 70-1499-00..........$16.95 Cat.#70-1496-00.. ...$16.90

70-1449-00 70-1456-00 70-1416-00 70-1491-00 70-1464-00
Inspirational Scroll Saw The Complete Guide to Ultimate Scrolling Kid Crafts: Woodworking Compound Scroll Saw
Projects Making Wooden Clocks Patterns Collection Creations
This new book by John A. This book has 52 full size In this new book, any child can The book begins with an in-
These expressions of faith & Nelson will never let you run patterns. It has vintage clocks, discover the fun of woodworking depth look at the techniques
hope will be treasured for out of ideas for clocks again. wildlife intarsia, Christmas while building self-confidence, behind cutting three-
He offers plans and parts lists projects, realistic portraits, and developing a can-do attitude, dimensional compound pieces.
generations. Book has ready to
for a wide variety of much more.
use patterns of classic Christian and establishing hand-tool skills This book is filled with patterns
traditional, Shaker and
symbols. that will last a lifetime. The 10 and projects for 3D pieces. The
contemporary clocks. There
projects use ordinary lumber author provides shop-tested
are plans for 37 clocks with
full colour photos. It also and readily available supplies. patterns for a dozen clocks, a
has an inside look at the dozen candle sticks, more than
history of clock making in two dozen delightful critters and
America. The book has 37 a carousel music box.
plans and 176 pages.
Cat.# 70-1449-00 $16.95 Cat.# 70-1456-00 $29.85 Cat# 70-1416-00-00 $8.95 Cat# 70-1491-00 $14.95 Cat.# 70-1464-00 $24.55
70-1461-00 70-1417-00 70-1448-00 70-1469-00 70-1494-00
Wooden Banks You Can Custom Wooden Music Super Simple Scroll Saw Pen Turner’s Workbook Easy to Make Old
Make Boxes Clocks Second Editions Fashioned Toys
Thieves will be hard-pressed to Expert turner and teacher, Barry Fun and easy toys that being
In Custom Wooden Boxes for Time will fly as you see this
find the plugs that keep your Gross, provides the latest back memories of the past. This
the Scroll Saw, renowned scroll beginners guide to making your
money safe in these scroll saw techniques in this revised second book is a great way to connect
saw artists Rick and Karen own clocks. Book has nearly 50
and bandsaw banks. Each bank edition of his best-selling, "Pen with kids.
features a plug that is an Longabaugh have gathered patterns, basic instructions and Turner's Workbook." New
integral part of the original their finest and most popular finishing techniques. projects and updated information
design. Full color photographs music box patterns into a about pen finishes and materials
of the finished banks and shop- collection that will delight and makes this book a must-have
tested patterns for both the challenge scrollers of all skill addition to the workshop and pen
scroll saw and the band saw levels. turner's library.
make cutting and assembly
easy.
Cat.# 70-1417-00......$19.95 Cat.# 70-1494-00 $11.25
Cat.# 70-1461-00 $24.55 Cat.# 70-1448-00 $16.95 Cat.# 70-1469-00 $19.95

70-147600 70-1493-00 70-1481-00 70-1402-00 70-1497-00
Patio & Home Decor Fundamentals of Wood Finishing Fixes How to Build The Big Book of
with Envirotex Woodturning This book offers quick answers 35 Great Clocks Weekend Woodworking
to over 175 most frequently
This book has many beautiful Lavishly illustrated with over This is an easy to read soft This book is filled with 150
answered questions. Some
project ideas using Envirotex. It 400 photos, this is the ultimate cover book for beginners and classic projects, and covers
include “how to avoid drips
gives easy to follow instructions introductory guide to the fine art experienced woodworkers. everything from selection the
when I spray finish”, what finish
so that professional results can of using the lathe to shape wood There are plans for wooden wood to gluing and finishing.
should I use for the front door”,
be achieved. into boxes, bowls, toys, and clocks, simple plaque clocks Novices can make simple
and “what is the best finish to
other beautiful objects. use when items come in contact and tall case clocks. It is mirrors or shelves, while more
with food”. written by Joseph Daniele with advanced woodworkers can try
192 pages. a small cupboard or side table.
Cat# 70-1476-00.............$8.95 Cat.# 70-1493-00.........$28.80 Cat.# 70-1481-00..........$24.95 Cat.# 70-1402-00.........$30.85 Cat.# 70-1497-00.........$20.95
70-1498-00 70-1478-00 70-1414-00 70-1484-00 70-1483-00
“I Can Do That” Designs for Pyrography 101 Wooden Clock Miniature Clocks for the 50 Easy Weekend Scroll
Woodworking Projects and Other Crafts Patterns Scroll Saw Saw Projects
Learn how to create fantastic
Collection of copyright-free Great looking but
There are over 100 fantastic, gifts and even generate extra
With a modest kit of tools, a patterns created for eye-popping wooden clocks in straightforward scroll saw
income with your scroll saw!
beginner can build one of 20 pyrographers and easily this book. Each imaginative projects, with ready to use
Master craftsman Rick
quality projects in less than design uses an inexpensive patterns, are included in this
adapted to other crafts. Longabaugh presents more than
quartz clock movement.
two days using basic Subjects include birds, trees, Included in the book are full 250 unique patterns designed collection. Fretwork jewellery
material.Projects include flowers, alphabets and more. set of patterns for 101 for the popular 13/8" clock boxes, unusual clocks and
storage benches, chairs, amazing designs, a complete inserts.Clear and easy-to-follow many reproductions of antique
list of tools and equipment,
shelving, coffee and end (Check out our wood burning instructions, coupled with designs will provide exciting
easy to follow directions, and
tables. tools on page 69.) photographs, plus super ideas precise computer graphics, will challenges for beginning and
for enhancing each clock with help you to produce professional intermediate woodworkers.
decoupage, painting, results in no time regardless of
stencilling, or wood-burning your scroll saw skill level.
decorations.
Cat.# 70-1498-00 $22.45 Cat.# 70-1478-00 $21.95 Cat.# 70-1414-00 $24.95 Cat.# 70-1484-00 $24.95 Cat.# 70-1483-00 $12.75

THE “RD SERIES” MINI QUARTZ MOVEMENT Photos from students at Brother Andre
Catholic School in Markham with
Built in teacher Len Sekora.
Handy er
Hang • 6 Shaft lengths available
• 2 year warranty
• Case dimensions 2 7/32 w x 2
7/32” x 5/8”d
(6 cm x 6 cm x 1.6 cm)
• Uses 1 “AA” cell battery (Cat.#
70-3201) which lasts up to 2
years (see pg.48)
• FREE hour, minute and second
hand (see pg. 48)
• Mounting hardware included
(brass washer, hex nut, rubber
washer, minute nut)
• Hangers provided on request Cat.
#70-2128 (no charge)
• 5/16” (8 mm) Shaft Diameter
CAT.# SHAFT LENGTH FOR DIALS UP TO

70-7101-NS 1/8” 1/8” (3 MM) Actual Shaft Length (threaded stem)
70-7102-NS 1/4” 3/16” (5 MM) Qty $/Each
70-7104-NS 3/8” 1/4” (6 MM) 1/8” 1/4” 3/8” 1/2” 5/8” 13/16” 1 $6.95
2-5 $5.80
70-7106-NS 1/2” 3/8” (9 MM)
6-19 $4.75
70-7107-NS 5/8” 1/2” (12 MM)
20-49 $3.95
70-7108-NS 13/16” 3/4” (19 MM) $50+ $3.75
70-7101-NS• 70-7102-NS• 70-7104-NS• 70-7106-NS • 70-7107-NS • 70-7108-NS
Minute Nut Driver Hand Protectors Forstner Bits

No more fumbling for minute nuts. This Protect your clocks when shipping or transporting with these clear plastic
tool picks up the nut and grips it securely . This will make a hole to fit the RD
hand protectors. mini movements.
Bit diameter is 3 1/8”
A QTY $/EACH
1 35¢
2-5 30¢
CAT. # 70-3824-00..$21.75 B
6-UP 25¢
Tool Nut Tightener
This tool is very handy when repairing
or making clocks.
A) Cat.# 70-2143-00
Hands up to 5 1/2” (139 mm)
B) Cat.# 70-2145-00
CAT. # 70-3801-00...$1.55 Hands up to 3 5/8” (85 mm) Cat.# 70-3802-00..$26.45
MP PENDULUM MOVEMENTS LYRE ATTACHMENTS

• Slimline design is great for small cases 2” bob 2 3/4” bob Now your quartz movements can have a
• Runs on one “AA” cell battery (70-3201) beautiful lyre pendulum. Just add these
See pg. 48 attachments to a pendulum 12” (30 cm) or
• Pendulum hook is 3/8” (10 mm) from front longer with a width from 1/16”-3/16” (2 x 3
of movement mm). The dimensions are approximately 2” x
• Case dimensions 3 ½ h x 2 1/8” w x 7/8” 4” (50 x 101 mm).
depth (90 mm x 50 mm x 20 mm)
• For free hands see page 48 QTY $/EACH
• Adjustable pendulum from 7” - 18” (180 1 $2.85
mm - 460 mm) 2-5 $2.65
• Bob diameter is 2 3/4” (70 mm) -SM -00
6-19 $2.35
• Pendulum swings from 4 1/2” - 7” (114 mm Smaller 2” pendulum
bob available.Just add 20+ $2.30
x 178 mm)
2 3/4” bob depending on length SM to end of the
number instead of 00 Lyre attachments work
diameter • 5\16” (8 mm) Shaft Diameter
Project Idea well with our QW and MP
Qty $/Each The project is from The movements.
Cat.# shaft Length Complete Guide to
1 $13.55
70-6112-00 3/8” (10 mm) Making 37 Wooden
2-5 $12.20 Clocks book
70-6012-00 5/8” (16 mm)
6-19 $10.90 Cat # 70-1456 $29.85 Cat# 70-0026-00*
70-6212-00 7/8” (22 mm) 20-49 $09.95 See Page 44 for details. *pendulum not included.

QW Westminster Chime Dual Chime Movement
• Plays Westminster melody on
quarter hours and counts out
the hours Without
Pendulum
• Runs on one “C” cell battery
(70-3203) See pg. 48
• Pendulum hook is 5/8” (16 mm)
from front of movement Cat.# 70-5501-50
• Case dimensions 3 3/4”h x 3”w $55.00, 2 FOR $52.00 EA
x 1 1/8”d (10 cm x 8 cm x 3
Qty $/Each
cm) • Choose either Westminster or Whittington Melody
Qty $/Each 1 $58.00
• For free hands see page 48 • Volume control and night silencing features 2-5 $54.50
1 $39.95
• Adjustable pendulum from 8” 2-5 • Strikes on all quarter hours. 6-19 $52.00
$35.50 20+ $51.50
- 19” (20 cm - 48 cm) 6-19 $31.95 • Speaker can be detached
• 3/8” (10 mm) shaft diameter 20-49 $30.20 • Runs on 1 “C” cell battery (70-3203)
$50+ $27.50 • Case Dimension 5 1/4” x 3 1/4” x 1 1/4” (133 x 83 x
31 mm)
Cat.# shaft Length Pend.Length 1 2-5 6-19 20-49 50-up
• Pendulum hook is 3/8”
70-6401-00 3/8” (10 mm) no pendulum $38.45 $33.95 $30.45 $28.75 $25.90 Cat.# shaft Length Pend. Length
70-6301-00 3/4” (19 mm) no pendulum $38.45 $33.95 $30.45 $28.75 $25.90 (10 mm) from front of 70-5501-50 3/8” (10 mm) no pendulum
70-6414-00 3/8” (10 mm) with pendulum $39.95 $35.50 $31.95 $30.20 $27.50 movement 70-5513-50 3/8” (10 mm) 8”-18” (200 mm-460 mm)
70-6314-00 3/4” (19 mm) with pendulum $39.95 $35.50 $31.95 $30.20 $27.50 • Free hands page 48. 70-5613-50 3/4” (19 mm) 8”-18” (200 mm - 460
Hermle Dual Chime Movement Hermle Chime Movement

• Separate speaker produces
This movement is an alternative to the expensive
superior sounding Bim Bam
mechanical movements used in Grandfather
or Westminster chime
clocks. It’s case incorporates the speaker
• Automatic night reduction or
and allows you to hang ornamental
silencing and volume control
weight shells like those shown in the
• German quality
photo. It has an extra-long hand shaft
• Case dimensions 4 3/8” x 4
and a heavy duty drive coil, which is able
1/8” x 1 1/8” (110 x 105 x 25
to swing a 34" (optional Lyre Pendulum
mm)
shown below). It takes two ‘C’ cell
• For free hands see page 48
• For dials up to 1/2” (12 mm) E) CAT.# 70-0875-00...$85.50
thick
Movement w/pendulum shown
• Requires 2 “C” cell batteries
(70-3203) (See page 48) Cat.# 70-0801-00
$59.50, 2 FOR $58.50 EA Optional lyre pendulum
Cat.# 70-0050-00
Cat.# Pend. Length Pend.Swing Bob Diam.
70-0801-00 NO PENDULUM NO PENDULUM NO PENDULUM (shown right)
70-0807-00 9” (23 cm) 5” (13 cm) 2 1/2” (6 cm) 38 1/2” long with 4 1/2” bob...$52.00
Qty $/Each
70-0809-00 11” (28 cm) 5” (13 cm) 2 1/2” (6 cm) 1 $73.50
70-0811-00 13” (33 cm) 6 1/4” (16 cm) 2 1/2” (6 cm) 2-5 $71.50 Optional weight shells with chain
70-0815-00 17.5” (44 cm) 6 1/4” (16 cm) 3 1/2” (8 cm) 6-19 $67.00 F) Cat.# 70-2104-00 (shown left)
70-0819-00 21.5” (55 cm) 6 3/4”(17 cm) 3 1/2” (8 cm) 20+ $63.00 $29.25pkg of 2 shells
70-0823-00 25.5” (65 cm) 7 1/4” (18 cm) 3 1/2” (8 cm) 5.38” x 1.25” (137 mm x 31 mm)
Long Pendulum Drive Unit NEW Cuckoo Clock Movement

This unit allows you to use an inexpensive quartz This battery operated cuckoo clock movement has
clock movement in a large case to look like an a realistic sounding cuckoo chime. It comes
expensive mechanical movement. It is easy to install complete with acorn weights, chain, dial and
and the battery holder can be remotely mounted for pendulum. Case dimensions are;
easy battery access. It will swing pendulums up to Movement/pendulum case 5” x 4 ¾” x 2”, Cuckoo
2.5 lbs. The dimension is 6 7/8”H (175mm) x 2 3/4”W housing 3 3/8” x 3” x 2 ½”, door frame 2 ½” x 2 ½”.
(70mm) x 1 7/8”D (48mm). It runs on one D battery FEATURES
Cat# 70-3205-00. • Chimes out the hours
Cat.# 70-0645-00 Drive Unit • Automatic night shut-off
• Runs on 2 “D” cell batteries (cat.# 70-3205)
$62.00 Pendulum not Included • Free plans with movement purchase to build clock
pictured right.
Optional Pendulum • Dial is 5 ½” and weights are 5 ¾” long (Hands are
Cat# 70-0050-00 $52.00 included)
38 1/2” long with 4 1/2” bob
Cat.# 70-0921-RM...$74.50
Optional weight shells with chain
F) Cat.# 70-2104-00 (shown left) PLANS ONLY
$29.25pkg of 2 shells CAT.# 70-1427-PL $5.95
5.38” x 1.25” (137 mm x 31 mm)
E: Gold hands 70-1600’s • Black Hands 70-1500’s
E NOT
PLEAS Free hands
with movements.
BLK 70-1502 70-1501 70-1508 70-1511 70-1515 70-1519 70-1523 70-1527 70-1531 70-1535 70-1541 70-1563 `70-1575 70-1553
GLD 70-1602 70-1601 70-1608 70-1611 70-1616 70-1619 70-1623 70-1627 70-1631 70-1635 70-1641 70-1663 70-1675 70-1653
SIZE 1 3/8” 1 3/4 2” 2” 2 1/8” 2 1/2” 2 1/2” 2 1/2” 2 3/4” 2 5/8” 2 7/8” 3” 3 1/8” 3 5/16”
35 mm 44 mm 50 mm 50 mm 54 mm 64 mm 64 mm 64mm 70mm 67 mm 73 mm 76 mm 77 mm 78 mm
Qty 1 2-5 6-19 20-49 50+

$/Set $1.10 $0.95 $0.85 $0.65 $0.45
70-1542 70-1543 70-1544 70-1545

See hand Fishing Rod Silverware Tools Crayons
BLK 70-1571 70-1587 70-1581 70-1597 70-1547 70-1585 70-1583 70-1589
GLD 70-1671 70-1687 70-1681 70-1697 70-1647 70-1685 70-1683 70-1689
protectors on 2 78” 3 1/2” 4 3/8” 3”
SIZE 3 3/8” 3 1/2” 4 1/2” 4 1/4” 4 1/2” 4 1/8” 4 3/4” 4 5/8” page 46 73 mm 89 mm 111mm 76 mm
86 mm 89 mm 114 mm 108MM 114 mm 105 mm ADD .50 FOR THESE SPECIALTY
HANDS
Free Hand Chart MINUTE HAND MEASUREMENT

(Please request To determine hand
cat.# 80-5907-00) length measure
from centre of dial
to time ring.
70-1591 Minute hand is measured from shaft
N/A hole to tip end of hand.
6”
152 mm
A
(Add .50)
B
SECOND HANDS C
Fig Length Gold Black Red Qty $ Each
A 1 1/8” (29 mm) 70-1723 70-1724 N/A 1 $0.95 D
B 2” (50 mm) N/A N/A 70-1727 2-5 $0.85
C 2 1/4” (57 mm) 70-1719 70-1720 N/A E
6-19 $0.60
D 3” (76 mm) 70-1717 70-1718 N/A 20-49 $0.45
E 2 3/4” (70 mm) 70-1707 70-1709 70-1708 50 $0.30 F
F 3 1/2” (89 mm) 70-1714 70-1716 70-1715
G 4 1/2” (114 mm) N/A N/A 70-1712
G
Second hands measured from round centre shaft to tip and can be trimmed shorter.
Batteries
Batteries for all your needs. The alkaline batteries last twice as long. It is recommended A
that you use alkaline batteries for chime units for longer life of movement.
B D G
C
Fig Cat.# Description 1 2-5 6-19 20-49 50+.
A 70-3205-00 D Alkaline $2.20 $1.97 $1.87 $1.65
B 70-3203-00 C Alkaline $2.15 $1.89 – – (We may substitute batteries
C 70-3201-00 AA Alkaline $1.25 $1.20 $1.10 $0.85 $0.78 of equal or better quality)
D 70-3211-00 AAA Alkaline $1.40 $1.20 $1.15 $1.05 $1.00
E 70-3207-00 “N” Battery $2.55 $2.20 $1.95 $1.82 $1.65
F 70-3214-00 Mini Insert #377 $1.60 $1.40 $1.20 $.95
G 70-3209-00 9 Volt Alkaline $4.20 $4.00 $3.80 $3.50 –
E F

12 Digit Numerals Qty $/Set Old English Numerals Qty $/Set
1 $1.55
2-5 $1.40 Available in gold only. 1 $1.55
6-UP $1.25 2-5 $1.40
6-UP $1.25
Cat.# Size
70-3065-00 1/2” (13 mm)
70-3066-00 3/4” (19 mm)
70-3067-00 1” (25 mm)
Colourful Glitter Numerals

Add Pizazz to your clock projects with these glitter numerals.
They are all 4 digit with dots and are 1” (25 mm) in size.
Arabic Roman
Colour Size Catalogue # Colour Size Catalogue # Cat.# Colour
Gold 3/8” (10 mm) 70-3008-00 Gold 3/8” (10 mm) 70-3022-00 70-3059-00 Black
Black 3/8” (10 mm) 70-2908-00 70-3060-00 Green Glitter

Black 3/8” (10mm) 70-2922-00
70-3061-00 Red Glitter
Gold 1/2” (13 mm) 70-3009-00 Gold 1/2” (13 mm) 70-3023-00
70-3062-00 Blue Glitter
Black 1/2” (13 mm) 70-2909-00 Black 1/2” (13 mm) 70-2923-00
70-3063-00 Gold Glitter
Gold 5/8” (16 mm) 70-3010-00 Gold 5/8” (16 mm) 70-3024-00 70-3064-00 Silver Glitter
Black 5/8” (16 mm) 70-2910-00 Black 5/8” (16 mm) 70-2924-00
Gold 3/4” (19 mm) 70-3011-00 Gold 3/4” (19 mm) 70-3025-00 Qty $/Set
Black 3/4” (19 mm) 70-2911-00 Black 3/4” (19 mm) 70-2925-00
1 $2.95
Gold 1” (25 mm) 70-3012-00
2-5 $2.60
Gold 1” (25 mm) 70-3026-00
6-UP $2.30
Black 1” (25 mm) 70-2912-00 Black 1” (25 mm) 70-2926-00
Gold 1 1/4” (32 mm) 70-3013-00 Gold 1 1/4” (32 mm) 70-3027-00
Black 1 1/4” (32 mm) 70-2913-00 Black 1 1/4” (32 mm) 70-2927-00
4 Digit Numerals Free Dots,Dashes & Teardrops

ARABIC Qty $/Set of 4
ROMAN Template Qty $/Set
1 $0.75 . 1 $1.25
on Request DASHES
2-5 $0.70 . Sold 2-5 $1.00 1”
6-19 $ .65 t
20-UP $ .50
12/Se 6-UP $0.95
3/4”
5/8”
Colour Size Catalogue # Colour Size Catalogue #
Colour Size Dots Dashes Teardrop 3/8”
Gold 3/8” (10 mm) 70-3001-00 Gold 3/8” (10 mm) 70-3015-00
Gold 3/16” (5 mm) 70-3036-00 N/A N/A
Black 3/8” (10 mm) 70-2901-00 Black 3/8”(10 mm) 70-2915-00
Black 3/16” (5 mm) 70-2936-00 N/A N/A
Gold 1/2” (13 mm) 70-3002-00 Gold 1/2” (13 mm) 70-3016-00
Black 1/2” (13 mm) 70-2902-00 Black 1/2” (13 mm) 70-2916-00 Gold 3/8” (10 mm) 70-3038-00 70-3029-00 N/A
Gold 5/8” (16 mm) 70-3003-00 Gold 5/8” (16 mm) 70-3017-00 Black 3/8” (10 mm) 70-2938-00 70-2929-00 N/A
Black 5/8” (16 mm) 70-2903-00 Black 5/8” (16 mm) 70-2917-00 Gold 5/8” (16 mm) 70-3039-00 70-3031-00 70-3042-00 DOTS
Gold 3/4” (19 mm) 70-3004-00 Gold 3/4” (19 mm) 70-3018-00 Black 5/8” (16 mm) 70-2939-00 70-2931-00 70-2942-00 5/8”
Black 3/4” (19 mm) 70-2904-00 Black 3/4” (19 mm) 70-2918-00 Gold 3/4” (19 mm) N/A 70-3032-00 70-3043-00
Gold 1” (25 mm) 70-3005-00 Gold 1” (25 mm) 70-3019-00 5/8”
Black 3/4” (19 mm) N/A 70-2932-00 70-2943-00
Black 1” (25 mm) 70-2905-00 Black 1” (25 mm) 70-2919-00 Cat. #80-5908
Gold 1” (25 mm) N/A 70-3033-00 70-3044-00 3/8”
Gold 1 1/4” (32 mm) 70-3006-00 Gold 1 1/4” (32 mm) 70-3020-00
Black 1 1/4” (32 mm) 70-2906-00 Black 1 1/4” (32 mm) 70-2920-00 Black 1” (25 mm) N/A 70-2933-00 70-2944-00
Corners for Your Projects ve Religious Items

Self-Adhesi
A B
Gold o
n Blac
k
OLD FASHIONED CORNER SCROLLS
Cat.# Size 1 2-5 6-UP
70-3081-00 1” (25 mm) $1.05 $0.90 $0.70 5/pkg
70-3082-00 2” (50 mm) $1.70 $1.45 $1.10
70-3083-00 3” (80 mm) $2.25 $1.90 $1.50
Sold
Fig Cat.# Size Pkg 1 2-5 6-19
4/Set HEART CORNER SCROLLS A 70-3073-01 1 1/2” (38 mm) 2/set $2.15 $1.75 $1.57
Cat.# Size 1 2-5 6-19 A 70-3073-02 2” (50 mm) 2/set $2.50 $2.00 $1.76
A 70-3073-03 3” (76 mm) 1/pkg $1.10 $0.90 $0.80
70-3085-00 1” (25 mm) $1.70 $1.46 $1.14
OLD 70-3084-00 2” (50 mm) $1.95 $1.70 $1.30
B
B
70-3069-01 1 1/2” (38 mm)
70-3069-02 2” (50 mm)
2/set
2/pkg
$2.15
$2.50
$1.75
$2.00
$1.57
$1.76
FASHIONED HEART 70-3086-00 3” (80 mm) $2.25 $1.90 $1.50 B 70-3069-03 3” (76 mm) 1/pkg $1.42 $1.16 $1.03

A D
B C
C A B
D
Fig Cat# Size Sugg Hands Price Fig Cat# Size Sugg Hands Price
A 70-2401-07 7 1/2”(190mm) 70-1575-00 $34.60 A 70-2404-04 4 1/2”(114mm) 70-1508-00 $35.00
B 70-2401-00 6 1/4”(159mm) 70-1531-00 $29.40 B 70-2404-05 5 1/8”(130mm) 70-1511-00 $35.00
C 70-2401-05 5 1/8”(130mm) 70-1511-00 $26.70 C 70-2404-06 6 1/4”(159mm) 70-1531-00 $36.75
D 70-2401-04 4 1/2”(114mm) 70-1508-00 $18.40 D 70-2404-00 7 1/2”(190mm) 70-1575-00 $33.90
B
A A
C
B
Fig Cat# Size Sugg Hands :Price

A 70-2411-00 7 7/8”(190mm) 70-1571-00 $49.75
C
B 70-2403-00 5 3/4”(146mm) 70-1515-00 $58.50 D
C 70-2402-00 7 7/8”(190mm) 70-1571-00 $37.20
A B Fig Cat# Size Sugg Hands Qty 1

A 70-2450-02 4 1/2” (114mm) not required $15.75
A 70-2450-08 5 7/8” (149mm) not required $17.45
A 70-2450-14 7 1/16” (179mm) not required #17.15
A 70-2450-20 8 5/8” (219mm) not required $25.20
A 70-2450-22 10 1/4” (260mm) not required $36.50
C B 70-2324-02 4 1/8” (105mm) 70-1508-00 $2.90
B 70-2324-06 5 1/16” (129mm) 70-1515-00 $2.90
D B 70-2324-14 6 11/16” (170mm) 70-1563-00 $3.05
B 70-2324-22 9 13/16” (299mm) 70-1581-00 $4.80
C 70-2320-02 4 1/8” (105mm) 70-1508-00 $2.90
D dial fits C 70-2320-06 5 1/16” (129mm) 70-1515-00 $2.90
‘C’ dial fits
into ‘A’ bezel into ‘B’ bezel C 70-2320-08 5 1/2” (140mm) 70-1523-00 $2.90
C 70-2320-14 6 11/16” (170mm) 70-1563-00 $3.05
Fig Cat# Size Sugg Hands Price C 70-2320-20 8 1/4” (210mm) 70-1587-00 $4.80
A 70-2425-00 11 7/16”(292mm) n/a $49.75 D 70-2322-22 9 13/16” (299mm) 70-1581-00 $4.80
B 70-2418-00 9 1/2” (250mm) n/a $49.95 D 70-2322-06 5 1/16” (129mm) 70-1515-00 $2.90
C 70-2334-CR 11 1/8”(280mm) 70-1581-00 $8.75 D 70-2322-14 6 11/16” (170mm) 70-1563-00 $3.05
D 70-2312-CR 9 1/2”(241mm) 70-1573-00 $6.40 D 70-2322-20 8 1/4” (210mm) 70-1587-00 $4.80
SELF-ADHESIVE DIALS
Fig Cat.# Size Colour Sugg.Hands Price
A 70-2335-00 5.25” (133 mm) Gold 70-1635-00 $2.50 B D
B 70-2336-00 5.25” (133 mm) Gold 70-1635-00 $2.50
A
C 70-2365-00 5” (127 mm) Gold Glitter 70-1619-00 $4.15 C
C 70-2366-00 6.75” (170 mm) Gold Glitter 70-1635-00 $4.40
D 70-3074-00 3” (76 mm) Gold 70-1602-00 $1.70
D 70-3077-00 4” (100 mm) Gold 70-1601-00 $1.74
D 70-3079-00 5” (120 mm) Gold 70-1631-00 $2.00
D 70-3080-00 7” (178 mm) Gold 70-1641-00 $2.65

A B A
B C D
Fig Cat# Size Sugg Hands Price

A 70-2206-00 10 3/8”x 7 7/8” 70-1575-00 $9.75
D C B 70-2220-00 8 3/8”x 6” ceramic 70-1511-00 $10.05
C 70-2201-00 8”(203mm) ceramic 70-1563-00 $7.55
D 70-2226-00 8”(203mm) ceramic 70-1587-00 $9.20
A B D
E

A 70-2205-00 9 7/8”(251mm) 70-1571-00 $9.70
C
B 70-2211-00 6”(152mm) 70-1527-00 $9.90
C 70-2202-00 9”(228mm) 70-1563-00 $17.10
D 70-22SR-05 7 7/8”(200mm) 70-1575-00 $8.00 E
E 70-2208-00 7 7/8”(200mm) 70-1575-00 $6.95
A 70-2301-05 7 7/8”(200mm) 70-1553-00 $7.20
B 70-2308-00 9 1/2”(241mm) 70-1685-00 $7.25
C 70-2305-00 7”(178mm) ceramic 70-1563-00 $8.75
A E M D 70-2300-12 8”(203mm) 70-1553-00 $6.65
I E 70-2300-13 8”(203mm) 70-1553-00 $6.65
A
B C
B F N
J
C G F
K O
D
E
D H P
Fig Cat# Size Sugg Hands Price G

A 70-2386-00 7 7/8”(200mm) 70-1587-00 $5.35
B 70-2383-00 7”(178mm) 70-1541-00 $4.55 H
C 70-2382-00 6”(150mm) 70-1523-00 $4.80
D 70-2326-RM 5”(128mm) 70-1511-00 $4.15
E 70-2328-00 7 7/8”(200mm) 70-1587-00 $6.60
F 70-2381-00 7”(178mm) 70-1541-00 $4.95
G 70-2384-00 6”(150mm) 70-1523-00 $4.15
A 70-2300-61 8”(203mm) 70-1553-00 $9.95
H 70-2326-AR 5”(128mm) 70-1511-00 $4.15
B 70-2313-00 8”(203mm) 70-1553-00 $9.95
I 70-2319-50 7 7/8”(200mm) 70-1587-00 $5.70
C 70-2314-00 8”(203mm) 70-1553-00 $9.95
J 70-2319-07 7”(178mm) 70-1541-00 $5.95
D 70-2300-62 8”(203mm) 70-1553-00 $9.95
K 70-2319-01 6”(150mm) 70-1523-00 $4.50
E 70-2370-08 8”(203mm) 70-1553-00 $9.95
M 70-2318-08 7 7/8”(200mm) 70-1587-00 $5.70
F 70-2342-50 8”(203mm) 70-1553-00 $9.95
N 70-2318-02 7”(178mm) 70-1541-00 $5.95
G 70-2300-64 8”(203mm) 70-1553-00 $9.95
O 70-2318-00 6”(150mm) 70-1523-00 $4.50
H 70-2316-00 8”(203mm) 70-1553-00 $9.95
P 70-2300-27 4 1/4”(107mm) 70-1511-00 $2.30

INSERTS 2 3/4” (70MM) (2 3/8” Mounting Diameter) LARGE INSERT
These 2 3/4” inserts have a 2 3/8” mounting diameter (Forstner bit 70-3823-00) and 5 7/8”, 6 1/4”
take “AAA” battery (70-3211-00). You can mix and match for quantity
and 7 7/8”
A B C D Mounting Diameter is 3 1/4”)
Side
3 1/4”
A
View
2 3/4”
2 3/8”
B
E G
F H
70 MM (2 3/4”)
Fig Cat# Description QTY 1 2-5 6-19 20-49 50-UP
A 70-1100-08 White Roman $10.50 $9.45 $8.40 $7.55 $6.70
B 70-1100-03 White Arabic $10.50 $9.45 $8.40 $7.55 $6.70
C 70-1100-06 Ivory Roman $10.50 $9.45 $8.40 $7.55 $6.70
D 70-1100-01 Ivory Arabic $10.50 $9.45 $8.40 $7.55 $6.70
E 70-1100-07 Gold Roman $10.50 $9.45 $8.40 $7.55 $6.70
F 70-1100-02 Gold Arabic $10.50 $9.45 $8.40 $7.55 $6.70
G 70-1100-10 Fancy Arabic $10.50 $9.45 $8.40 $7.55 $6.70
H 70-1100-12 Fancy Roman $10.50 $9.45 $8.40 $7.55 $6.70 C
INSERTS 3.5” (89MM) (3” MOUNTING DIAMETER) Fig Cat#

A 70-1100-20
Size
5 7/8”
1
$24.95
2-5
$22.85
6-19
$19.95
These 3.5”” inserts have a 3” mounting diameter (Forstner bit 70-3816-00) and take a AA cell battery B 70-1100-23 5 7/8” $24.95 $22.85 $19.95
(70-3201-00). You can mix and match for quantity pricing.
B 70-1100-25 7 7/8” $31.85 $29.25 $25.55
C D C 70-1100-26 5 7/8” $24.95 $22.85 $19.95
A 3 1/2 ”
B C 70-1100-27 6 1/4” $28.20 $25.85 $22.60
C 70-1100-28 7 7/8” $31.85 $29.25 $25.55
3”
Side 4” Diameter Inserts
View
These inserts have a 2 3/8” mounting diameter
and take a “AAA battery (70-3211-00). These
can be used with plans 70-1487-PL on page 54.
A B
E G
F H
89 MM (3.5”)
Fig Cat# Description QTY 1 2-5 6-19 20-49 50-UP
A 70-1147-WR White Roman $10.50 $9.45 $8.40 $7.55 $6.70
B 70-1148-WA White Arabic $10.50 $9.45 $8.40 $7.55 $6.70
C 70-1147-CR Ivory Roman $10.50 $9.45 $8.40 $7.55 $6.70
D 70-1148-CR Ivory Arabic $10.50 $9.45 $8.40 $7.55 $6.70
E 70-1147-00 Gold Roman $10.50 $9.45 $8.40 $7.55 $6.70
F 70-1148-00 Gold Arabic $10.50 $9.45 $8.40 $7.55 $6.70 Fig Cat# Size 1 2-5 6-19
G 70-1147-FR Fancy Roman $10.50 $9.45 $8.40 $7.55 $6.70
A 70-1178-00 4” $12.85 $11.40 $9.95
H 70-1148-FA Fancy Arabic $10.50 $9.45 $8.40 $7.55 $6.70
B 70-1181-00 4” $12.85 $11.40 $9.95

37mm Inserts in Various Styles Self-Adhesive Surface Mount
These inserts have a 1.3/8” (35.10mm) mounting diameter (use forstner bit 70-3813-00)
This self-adhesive unit makes easy work of
and a 1 7/16” (37mm) outside diameter. You can mix and match for quantity pricing. The mounting an insert to wood or other
battery (70-3214-00) is included material. There is no need to route out a
hole, the inserts fits easily in the unit. This
unit is 2” in diameter. Qty $/Each
1 $3.95
2-5 $3.60
6-up $3.00
Cat.# 70-1105-00 EA
70-1152-00 70-1150-00 70-1152-GD 70-1150-GD
White Arabic White Roman Gold Arabic Gold Roman
Insert Holder for Desk Set
Make a beautiful desk set with this
easy to mount insert holder. It is brass
colour and fits the 1 3/8” insert.
Mounting screw is included.The unit is
2 5/16” H
Qty $/Each
70-1152-BK 70-1150-BK 70-1152-CR 70-1150-CR 1 $3.85
Black Arabic Black Roman Ivory Arabic Ivory Roman 2-5 $3.45
6-19 $3.25
Qty $/Each 20-49 $3.15
1 7/16” 1 3/8” 50-up $3.05
1 $9.95
Front Rear
Cat.# 70-1104-00 EA
2-5 $8.95
Diam Diam
6-19
20-49
$7.95
$6.95
2” Inserts
50-up $6.55
These inserts have a gold-tone plastic Qty $/Each
9/32”
70-1150-SI 70-1152-SI Please call for higher
bezel with decorative waterfall design. 1 $13.35
volume pricing. Depth
Roman w/Silver Arabic w/Silver The mounting diameter is 1 55/64” and 2-5 $11.85
the depth is 9/32”. Battery is included. 6-19 $9.95
Qty $/Each
1 $11.75
2-5 $10.70
6-19 $9.65
20-49 $8.55
50-up $7.50
70-1152-FA 70-1150-FR 70-1152-BF 70-1150-BF

Fancy Arabic Fancy Roman Blue Floral Blue Floral
Photo Frames in 2 Sizes

70-1159-00 70-1158-00
These photo frames complement any project.
White Arabic White Roman
They are available in two sizes with gold or silver rims.
D Smaller 15/16” Inserts

A B C Qty $/Each
Inserts have a 29/32 mounting diameter 1 $16.95
(Use 7/8” bit 70-3809-00) and a 15/16” 2-5 $15.95
outside diameter. The battery (70-3214-00) 6-19 $13.95
is included. 20-49 $12.65
50-up $10.95
Fig Cat# Colour Size Mount Diam 1 2-5 6-19 20-49 50-up
A 70-1155-00 Gold 1 7/16 1 3/8” $3.70 $3.35 $3.10 $2.85 $2.55
B 70-1155-SI Silver 1 7/16 1 3/8” $3.70 $3.35 $3.10 $2.85 $2.55
C 70-1155-2G Gold 2” 1 3/4” $4.30 $4.10 $3.65 $3.45 $3.30 70-1194-00 70-1194-CR 70-1192-00 70-1192-CR
D 70-1155-2C SIlver 2” 1 3/4” $4.30 $4.10 $3.65 $3.45 $3.30 White Arabic Ivory Arabic White Roman Ivory Roman
1 7/16” Heart Inserts Swivel Insert & Photo Frame

This heart insert has an
The outer bezel mounts while the inner swivel case holds a 2” insert
ivory face with arabic
on one side (sold separately) and your photo, protected by a plastic
numerals. The mounting
lens, on the other. The mounting depth listed below will allow
diameter is 1 3/8”
the swivel piece to rotate freely.
Qty $/Each MOUNTING diameter 2 15/16” (75mm)

1 $10.95
MOUNTING DEPTH 1 3/16” (30 mm) Qty $/Each
2-5 $10.25
6-19 $9.75 1 $5.95
20-49 $8.50 Cat# 70-1106-00 2-5 $4.85
6-19 $4.25
Cat# 70-1109-00 50-up $7.45
20-49 $3.95

THE COLONIAL CLOCK THE “MINI MANTEL” CLOCK
A very prestigious pendulum wall clock that will This clock can be made into a beautiful mantel clock or
add to any room. Dimensions 27” x 13” x 4” (69 hung on the wall. Dimensions are 12” x 8 x 3 1/2”(30
cm x 33 cm x 10 cm). x 20 x 9 cm).
PLANS ONLY $5.95
PLANS ONLY $5.95
Cat.# 70-1437-PL
Cat.# 70-1430-PL
HARDWARE KIT $10.80
HARDWARE KIT $22.30 (no plans or wood) (No plans or wood)
Cat.# 70-1430-HK Cat.# 70-1437-HK
Kit Includes Kit Includes:
70-6212-00 Pendulum Movement Optional design 70-7104-NS Mini Movement
70-1571-00 Black Hands for plans 70-1437-PL 70-1501-00 Black Hands
70-1718-00 Black Second Hand 70-1724-00 Black Second Hand
70-2206-00 Dial, 7 7/8” sq 70-2300-27 Dial*
* Any dial 3 7/8” - 4 1/2” will fit with
slight modification.
THE DUTCH MASTER “IT’S ABOUT TIME” CLOCK PLANS

This clock is excellent for any study or office. A very A perfect gift for a loved one, this wall clock will
unique design. Dimensions 30” x 10 1/4” x 3 3/4” (76 give you an opportunity to polish your skills as
cm x 26 cm x 10 cm). you make curved scroll-saw cuts and smooth
PLANS ONLY $5.95 router profiles. Thanks to the project’s small
Cat.# 70-1433-PL size, it is relatively inexpensive to build. You’ll
find finishing easy too. A little stain or paint can
HARDWARE KIT (no plans or wood) $59.00 really bring the details of this pine clock to life.
Cat.# 70-1433-HK Case dimensions are 9.5” h x 7” w.
Kit Includes
70-6212-00 Pendulum Movement PLANS ONLY $2.50
70-1559-00 Black Hands Cat.# 70-1487-PL
70-1718-00 Black Second Hand
Use 4” insert 70-1181-00 (shown in photo) or
70-2404-00 Dial, 7 1/2” diam.
70-1178-00 with arabic numerals.
70-2102-00 Weight Shells with chain
(See page 52 for details)
THE “COUNTRY COTTAGE” THE SWISS COTTAGE CLOCK

This beautiful country clock will beautify your
The next best thing to having a cuckoo clock is our
country home. Dimensions are 12” x18” x 6
Swiss Cottage clock. Dimensions 17 1/8” x 11 1/2” x 3
1/2” (30 x 45 x 15 cm) 1/4” (76 cm x 26 cm x 10 cm).
PLANS ONLY $5.95
PLANS ONLY $5.95
Cat.# 70-1435-PL
Cat.# 70-1428-PL
HARDWARE KIT$11.45 (No plans or wood)
HARDWARE KIT $23.95
Cat.# 70-1435-HK
(no plans or wood)
Kit Includes:
Cat.# 70-1428-HK
70-7104-NS Mini Movement
Kit Includes
70-1587-00 Black Hands
70-6212-00 Pendulum Movement
70-1511-00 Black Hands
70-2320-20 Dial
* Any dial 7 1/2” to 8” will fit with
70-2220-00 Dial, 6” x 8 3/8”
slight modification. See page 50-51 for dials.
“CLASSIC COUNTRY” CUCKOO CLOCK PLANS

The drawer opens for all your personal items and This cuckoo clock plans accommodates the
there is also a nic-nac shelf. Case dimensions are battery cuckoo movement shown on page
28 3/4” x 12” x 15” (73 x 30 x 38 cm) 47. The clock dimensions are 10 “ h x 5 1/4”
PLANS ONLY $5.95 w x 3 1/4” depth.
Cat.# 70-1439-PL
CUCKOO CLOCK PLANS ONLY
HARDWARE KIT $11.45 (No plans or wood)
Cat.# 70-1439-HK 70-1427-PL $5.95*
Kit Includes:
70-7106-NS Mini Movement
70-1541 Black Hands *The plans are free with purchase of the
70-1720 Black Second Hand cuckoo movement shown on page 47
70-2320-20 Dial*
* Any dial 8 ” - 8 1/4 ” will fit with slight modification.
See page 34-35 for dials.

A Cable Driven Triple Chime Movement
Cat. # 70-0655-00 $641.00
• 8-day mechanical movement with 12 tuned chime rods
• Plays your choice of Westminster, Whittington or St. Michaels melodies
• Chime silencer
• 3 polished brass weight shells
• 2 year warranty
• Dimensions 8 1/2” d x 10 1/2” h x 10 1/2” w
• Hands included are 4 3/4” black serpentine
(Use dials 70-2255-00 low arch or 70-2254-00 and pendulum 70-0656-00)
B Hermle Chain Driven Movement

Cat. # 70-L50T $650.00
• Plays your choice of Westminster, Whittington or St. Michael’s
• Self-adjusting beat mechanism
• 3 polished brass weight shells
• 2 year warranty
• Dimensions 8 1/2” d x 10 1/2” h x 10 1/2” w C
• Hands included are 4 3/4” black serpentine D
(Use dial 70-md1050 and pendulum 70-LP270)
PENDULUMS FOR BOTH MOVEMENTS

C Cat.# 70-0656-00 $70.00
8 3/4” bob (220 mm) Lyre Pendulum , 12” (304 mm) swing,
45” (1143 mm) lgth
D Cat.# 70-LP270 $92.50
10 3/8” bob (270 mm) Lyre Pendulum,13 1/2” (343 mm)swing,
46” 1168 mm)lgth
DIALS (arabic numerals with blue movement moon dial)

E Cat.# 70-MD1050 for 70-L50T movement 15 9/16” h x 11” w . . . . . .$81.50
F Cat.# 70-2255-00 for 70-0655 movement 14 3/4” h x 11” w . . . . . . .$156.00
A 70-0655-00 B 70-L50T
G Cat.# 70-2254-00 for 70-0655 movement 15 9/16” h x 11” w . . . . . .$127.50 $641.00 $650.00
(Dial & Pendulum Extra)
E F G
Low Arch
All dials have a remote second time ring
Do I want a chain-driven or cable-driven CLOCK PLANS

movement?
There are a few advantages to a cable-driven movement that You can build split crown or solid crown.
are noteworthy. To wind a chain-driven movement, open the These step-by-step instructions make
waist door of the cabinet and pull the free end of the chain(s) building this heirloom easier than you
downward. It is very easy to accidentally hit the weights or
pendulum when winding this type of movement. This increases think.(Suggested movement 70-0655,
the likelihood of damage to the pendulum, weights and pendulum 70-0656, dial 70-2255)
suspension spring. With a cable-driven movement, winding is
accomplished by simply inserting a crank into the dial and
cranking up the weights. This method eliminates the necessity
of being in close proximity to the pendulum and weight PLANS Cat. 70-1455-PL . . . . . . .$29.00
assemblies.

Barometers, Hygrometer & Thermometers Mini Weather Inserts
2 3/4” & 3 1/2” (2 3/8” mounting hole) These miniature weather instruments can be used by
themselves or combined with any of our miniature fit-ups
with a white dial to make a time and weather station. The
outside diameter is 1 3/8” with a 1 7/16” mounting
diameter.(Mini clock inserts on page 53)
Thermometer Hygrometer
2 3/4” Barometer 2 3/4” Hygrometer 2 3/4” Thermometer This mini thermometer This mini-hygrometer is the
features both the Fahrenheit most accurate miniature model
Cat# 70-3601-00..$16.90 Cat# 70-3602-00..$8.95 70-3603-00..$8.95
and Centigrade Scales to you can buy. Perfect for
measure tempera-ture. humidor or desk sets.
3 1/2” Barometer 3 1/2” Hygrometer 3 1/2” Thermometer
Cat# 70-3730-00..$19.70 Cat# 70-3732-00..$8.95 Cat# 70-3731-00..$8.95 Cat# 70-3618-00...$7.50 Cat# 70-3619-00...$9.95
Thermometer Movements Tide Movements

B A
Cat.# shaft Length This unit tells the general time of
$5.95 70-3604-NS 3/8” (10mm) high and low tide on the Eastern
70-3607-NS 5/8” (16 mm) Seaboard. The case dimension
Hand Included is 2 1/4” x 2 1/4” x 5/8” ( 57 x 57
x 16 mm) and takes one AA
No battery is required for this battery. The movement fits dials
movement. It can be used indoors up to 1 thick. You can choose
or outdoors. Use this movement between and 8” or 4 1/4” dial
with one of our dials or create your (smaller dial has ship scene). A
own unique design. It installs like hand is included.
a regular mini movement and
C
takes standard hands as an
indicator. The movement comes Fig Cat.# Description Qty 1 2-5 6+
with a handy reference dial. It fits A 70-3710-00 Movement Only$9.85 $9.40 $8.30
in an opening 2 ¼ x 2 ¼.
B 70-3710-WD 8” Dial w/Mov’t$17.50 $16.65 $15.75
C 70-3711-WD 4 1/4” Dial w/Mov’t $17.65 $16.60
Nautical Weather Instruments

These handsome weather instruments have gleaming polished
brass cases. The attractive nautical style is a perfect gift for the
boating enthusiast. The front diameter is 3 7/8” (98 mm). The
rear mounting diameter is 4 1/4” (107 mm) and the depth is 1
1/4” (44 mm). Clock uses 1 AA cell battery.
Fig Cat.# Description Price
A 70-3610-00 Barometer $34.80
1 1/4”
B 70-3611-00 Clock $27.35

A B C C 70-3612-00 Hygro/Therm $33.90
A 12.5” Radio Controlled Atomic Clocks

Never change the time again! These clocks receive a low frequency signal from the
National Institute of Standards and Technology in Colorado. It is the most accurate time-
keeping used by railroads. radio and television stations, even NASA. These clocks “jump
* ahead” and “fall back” automatically. (For movements only see page 58)
*This clock is Fig Cat# Description Price

excellent for A 4-14151 12” Black Acrylic Frame $34.00
classrooms. It B 4-14125 12.5” Oak Frame w/Glass Lens $47.25
comes with a battery C 4-14126 12.5” Walnut Frame w/Glass Lens $47.25
pack which extends
the life to 6 years. B C D D 4-14127 12.5” Cherry Frame w/Glass Lens $47.25

Extra Assorted Hands & Numeral Packs
Keep extra hands or numerals in stock for more design options. These bulk pack in either 20 or 50 lots. The hand packs
included second hands.
A
A) Assorted Hand Packs
B
CAT.# 70-5412-20 20 SET PACK . . . . . $22.00
CAT.# 70-5412-50 50 SET PACK . . . . . $38.00
B) Numeral Packs
CAT.# 70-5409-20 20 SET PACK . . . . . $20.00
CAT.# 70-5409-50 50 SET PACK . . . . . $35.00
101 Wooden Clock Patterns

Hand Protectors “C”Cell Movements
There are over 100 Protect your clocks when shipping or transporting with these This higher torque movement enables you to use larger
fantastic, eye-popping clear plastic hand protectors. hands. The case dimensions are 2 11/16”h x 2 1/4”w x
wooden clocks in this
1 3/16”d (68 x 57 x 30 mm) The ‘C’ cell battery lasts for
book. Each imaginative
up to three years. They are available with a 3/8” or 3/4”
design uses an
inexpensive quartz
A shaft length with a 3/8” (10 mm) shaft diameter.
clock movement.
B
Included in the book are
full set of patterns for QTY $/EACH
101 amazing designs, a 1 35¢
complete list of tools 2-5 30¢ Cat.# shaft Length
and equipment, easy to follow directions, and
photographs, plus super ideas for enhancing
6-UP 25¢ 70-0204-00 3/8” (10 mm)
each clock with decoupage, painting, 70-0208-00 3/4” (19 mm)
A) Cat.# 70-2143-00
stencilling, or wood-burning decorations. Hands up to 5 1/2” (139 mm)
Cat.# 70-1414-00 $24.95 B) Cat.# 70-2145-00 1 2-5 6-19 20-49 50+
Hands up to 3 5/8” (85 mm) $14.30 $12.85 $11.40$10.30 $9.70
The Complete Guide to Making
Wooden Clocks
How to Build 35 Great Clocks Brass Weight Shells
These brass weight shells can be added to make your
This new book by John This is an easy to read pendulum clocks extra special. They are available in two
A. Nelson will never let soft cover book for
you run out of ideas for
sizes and come with chain. Extra brass chain is available.
beginners and
clocks again. He
e x p e r i e n c e d
offers plans and parts
woodworkers. There
lists for a wide variety
of traditional, Shaker are plans for wooden
and contemporary clocks, simple plaque
clocks. There are clocks and tall case
plans for 37 clocks clocks. It is written by
with full colour photos. It also has an Joseph Daniele with 192 pages.
inside look at the history of clock making in
America. The book has 37 plans and 176 Cat.# Description Size 1 . 2-5. 6+.
70-2101 Weight Shell 9 1/8” X 1 9/16” diam (254 x 44 mm) $14.95 $13.80 $12.65
pages. 70-2102 Weight Shell 5” X 1 1/8” diam (137 x 29 mm) $14.25 $13.45 $12.85
Cat.# 70-1456-00 $29.85 Cat.# 70-1402-00.........$30.85 70-2106 Extra Chain per foot $00.85 $00.75 $00.60
Extra Hardware for Movements Pendulum Conversion Kits

D F H
C
Convert our mini movements into a pendulum
K
B movement. The three piece case snaps together
easily. The pendulum can be cut to your required
length from 8” to 19” (203 x 483 mm). The case
E
A G measures 5 1/2” h x 2 3/8” w x 1 1/4” d (140 x 60 x
32 mm) and the hook is 5/8” (16 mm) from front of
$2.95 case. Runs on 1 AA cell battery. See page 46 for
10/pkg Fig Cat.# Description Size Pkg movement to accompany this drive mechanism.
A 70-2119-00 Minute Nuts for RD & QP movt’s 10 L
B 70-2120-00 Minute Nuts for MP & QW movt’s 10
I C 70-2127-00 Adapter Nut 5/16” TO 7/16” 10 1 2-5 6-UP
D 70-2124-00 Hex Nuts 5/16” shaft 10
E 70-2121-00 Hex Nuts 7/16” shaft 10 $11.00 $10.00 $9.00
F 70-2115-00 Brass Washers 3/4” x 7/16” 10
G 70-2116-00 Brass Washers 5/8” x 7/16” 10
H 70-2125-00 Brass Washers 7/16” 5/16” 10 Hardware in bold is the
I 70-2113-10 Cap Nuts for MP & QW movt’s 10 standard hardware for the
J 70-2114-10 Cap Nuts for RD & QP movt’s 10 mini movements.
J K 70-2128-00 Hangers for RD movements 10 CAT.# 70-4560-00 PENDULUM INCLUDED
Atomic Clocks
This clock is always accurate to the exact second because it contains a
Reverse Movements
miniaturized radio receiver that monitors a low frequency time signal. It self A clock for people looking ahead to
corrects the time each day. It is easy to set up and runs on a AA cell battery. yesterday. This unique clock adorned
(Cat.# 70-3201 pg 48). Due to the radio signal it cannot be used with a barber shops at one time so that it
metal dial.Hands are on page 48 was possible to read the time in the
mirror. See page 48 for free hands.
Qty $ Each
Cat# Shaft Length
70-0912-00 5/32” 1 $24.95
70-0914-00 1/4” 2-5 $23.70 Cat.# Description Sugg.Hands 1
70-0916-00 13/32
6-19 $21.85 70-0104-CC 3/8” Shaft Mov’t N/A $8.15
20-49 $19.95 70-0108-CC 3/4” Shaft Mov’t N/A $8.15
50-up $18.70 70-2339-00 9” White Dial 70-1573 $7.70
70-2340-00 6 1/2” White Dial 70-1539 $5.05
Electric Movements Quartz Skeleton Movement

Never worry about changing batteries again. Use these movements in a new The rotating gears of this brass quartz skeleton movement clock
clock or replace a worn electric movement in an antique clock. are fully visible. Included are a brass-plated aluminum dial,
Qty $ Each remote second hand, black hour and
1 $14.95 minute hands. Two mounting posts on
2-5 $13.30 the bottom provide easy mounting to a
TECHNICAL DATA 6-19 $12.60 base. Some assembly required.
• 110 Volts / 60 HZ 20-49 $11.95 Requires 2 ‘AA’ cell batteries
• 6’ Cord length (white) 50-up $9.95 (70-3201-00).
• Current consumption 3 mA
• Fits in 3” diameter opening
Free hands see page 30

Cat# 70-0641-00.........$24.95
Cat.# 70-9106-NS Max. Dial Thickness 1/2” Size: 6"H x 5"W x 1 1/2"D
Cat.# 70-9108-NS Max. Dial Thickness 3/4”
High Torque “AA” Movement

For hands up to This movement is capable of running the longest
17 1/2” hands! hands on the market. Case dimensions 1 5/16”
h x 2 1/4” w x 5/8” depth. Shaft length is 3/8”
and it uses 1 “AA” cell battery (cat.# 70-3201) Cat.# 70-1595 7 3/8” $4.95
Hands are sold separately and are available
in black only.
Cat.# 70-0904-00 Movement Only
Qty $/Each Cat.# 70-1594 11 1/8” $6.30
1 $12.60
2-5 $11.60
6-19 $11.40
20+ $10.75 Cat.# 70-1593 17 1/2” $11.55
Design-a-Dial Clock Kits Wrist Watch Clock Plans

Order a fitup on page 52 and receive free
Decorate your own clock dial with these large kits. The dials have
plans for this popular clock plan. It will
large easy to read numerals. All you do is add your personal Total
otal
touch. A clear acrylic cover (13.5”) and clock movement is accommodate any of our 2 3/8” inserts.
length
included in each kit. is 16” Cat# 70-1490-00
• Great for kids birthday Wrist Watch Plans
parties 10 CLASS PAK
• Excellent as a camp craft
• Easy to assemble
$
94.50
CAT.# 70-5460
• Make a family mosaic with
photos
CAT.# 70-2460 KIT
QTY $ EACH
Kit Includes: 1 $11.80
2 practice dials, 1 x good dial, 2-5 $10.50
clear acrylic front cover, clock 6-19 $9.45
20-49 $8.95
movement, hands, and cardboard
backing.

Attractive Desk Pensets Adhesive Pen Bases
These attractive pen sets have a plastic funnel with brass swivel base. Pens are sold Just screw your pen holder into this brass
10 /pkg and include the metal screw. They are available in black and white. base then use the self- adhesive tab to
attach to your project. No need to drill
your project. They are solid brass.
Qty $ pkg
1 $24.45
Funnel not
2-5 $21.75
included
`6-up $19.00 1 1/8”
x1 1/8”
(29 x 29 mm)
Qty $/10/pk
1 $10.30
80-4208-00 Black 10/pkg 80-4209-00 White 10/pkg 2-5 $9.10
6+ $8.60
Cat.# 80-4213-00 10/pkg
Funnels for Pen Turning Memo Holder Cross Style Pen
Projects
This universal funnel can be used
This is ideal for making your own
combination desk pen and memo
& Funnel
with the “Designer”, “Slimline” or
holder. Screw in base is provided. It This elegant slimline “Cross”
“Comfort” pen kits shown on page64.
Match the wood of your pen with your has a high quality brass finish. The style penset adds a special
base. unit is 4” (10 cm) high. touch to your desk projects.
The pensets are gold and
Cat# 12-PKUFUN....$8.25EA Qty $ Each
Works with sold individually.
adhesive 1 $3.55
Make a desk pen out of most twist 2-5 $3.20 Qty $ Each
pens with this versatile accessory. It pen base
shown 6-19 $2.85 CAT.# 80-4204-00 1 $9.90
mounts into a 9/16” hole drilled at any 2-5 $9.65
angle. upper right. 20-49 $2.45
50+ $2.30 6-19 $9.10
Cat# 12-DAUNIV...$10.65
3/PKG 20-up $8.85
CAT.# 80-4241-00
Brass Candle Cups Insert Holder for Felt Bumpers

Design your own candle sticks with these Desk Set These self-adhesive dark green bumper
brass furrels. They can be inserted into pads are ideal for the bottom of your projects
Qty $/Each
a 1” (25 mm) diameter opening and are 1 1 $3.85
to protect table tops. They are 3/8” in
diameter and 1/32” thick. They have 100 per
1/8” (29 mm) high. They fit a standard 2-5 $3.45
6-19 $3.25 sheet
candle. 20-49 $3.15
CAT.# 80-4272-00 CAT.# 80-4271 100/SHT
50-up $3.05 Qty $/SHT
6/PKG 1 $1.38
Qty $/pkg * see page 53
for inserts 2-5 $1.33
1 $2.40
6-19 $1.19
2-5 $2.15
20+ $1.06
6-19 $1.91 Make a beautiful desk set with this easy to mount
20+ $1.79 insert holder. It is brass colour and fits the 1 3/8”
insert. Mounting screw is included.The unit is 2 5/16”
H
Cat.# 70-1104-00 EA
Breadknife Blades
Cat.# 19-3031-HK
Blade 10 1/2” x 5/8” wide
(267 mm x 10 mm)
Qty $/Blade Actual Width
1 $4.30
Vo l u m e
2-5 $4.10
discounts
6-19 $3.70 Plans breadknife
available.
20-UP $3.45 Cat.# 19-3031-PL Plans *
Please give
us a call. (on request only, one per order)

Tools for Quick Assembly Kidder Mitre Cutter
MINUTE NUT DRIVER TOOL NUT TIGHTENER
No more fumbling for minute nuts. This tool This tool is very handy when
picks up the nut and grips it securely . repairing or making clocks.
A heavy duty, multi-purpose, hand cutter for cutting &

trimming of wood, plastic, rubber etc. By changing anvils
to fit your needs, you can easily encounter tough jobs with
ease
CAT. # 70-3824-00.......$21.75 CAT. # 70-3801-00......$1.55
Cat.# 83-1126-00.................................... $29.95
Glue Guns Forstner Bits

These bits are made of high
QTY $ each QTY $ each carbon steel. They bore
1 $5.90 1 $27.00 clean, precise holes in a
2-5 $5.55 2-5 $25.20 variety of woods. BIts up to
6 - 19 $5.20 6 - 19 $22.80
7/8” have a 1/4” shaft.
20+ $4.85 20+ $21.60
This economical mini glue gun is perfect for small
craft projects. It is 110v with 10watts. This heavy duty glue gun uses full size adhesive
sticks. It is ideal for general repairs and light industry.
It is 120V with 80 watts.
Cat.# Size Shank Price
Cat# 80-480-210 Mini Glue Gun 70-3820-00 1/4” 1/4” hex $3.35
Cat.# 80-480-208 Heavy Duty Glue Gun 70-3805-00 3/8” 1/4” hex $3.75
Glue Sticks
Glue Sticks
4” x 5/16” 50/pkg
8” x 7/16” 10/pkg
70-3806-00 1/2” 1/4” hex $3.95
Cat#80-4804450
Qty 1 $5.65 Cat#80-4804580 70-3807-00 5/8” 1/4” hex $4.40
Qty 2-5 $5.05 Qty 1 $5.45 70-3808-00 3/4” 1/4” hex $4.70
Qty 2-5 $4.50
70-3809-00 7/8” 1/4” hex $5.05
70-3810-00 1” 1/4” hex $5.50
3mm Hole Punch Picture Frame Router 70-3811-00 1 1/8” 5/16” hex $5.95
This high quality heavy duty hole punch can be 70-3812-00 1 1/4” 5/16” hex $6.25
used on popsicle sticks and spatulas. 70-3813-00 1 3/8” 5/16” hex $6.50
Eliminate using screw eyes and 70-3814-00 1 1/2” 5/16” hex $7.05
wire on the back of picture frames.
70-3815-00 1 5/8” 5/16” hex $7.60
This high speed router bit cuts T-
70-3821-00 1 3/4” 5/16” hex $8.15
slots that allow plaques or pictures
to hang on a screw or nail head,. It 70-3834-00 1 13/16” 5/16” hex $8.75
can also be used with an electrical 70-3817-00 1 7/8” 5/16” hex $8.95
drill. 70-3818-00 2” 5/16” hex $9.85
70-3819-00 2 1/8” 5/16” hex $10.35
70-3822-00 2 5/16” 7/16” hex $14.45
70-3823-00 2 3/8” 7/16” hex $15.45
70-3816-00 3” 7/16” hex $23.20
70-3802-00 3 1/8” 7/16” hex $26.45
Cat# 83-1130-00 $48.25 CAT.# 60-2517-00...$8.80 70-3833-00 3 3/4” 7/16” hex $31.95
Electric Engraver Sandvik Hobby Files Mitre & Razor

Complete engraving work on a wide variety of materials – metal, plastic, glass,
ceramic, wood and even leather. This versatile tool can be used to identify your This File has rasp cut for rough filing of Saw
valuables or to create works of art. The carbide point does much more than just wood, plywood and soft plastics and
scratch the surface. With the variable stroke control (up to 7,200 strokes per double cut for filing hard plastic, steel and
minute), you can create anything from formica. This is our best multi-purpose file.
fine lines to deep grooves.
CAT.# 80-4820 The length is 8” (20 cm).
FEATURES ENGRAVING TOOL Qty $/Each
- Stroke adjustment dial regulates engraving 1 $18.65
depth. 2+ $17.65
- Light and compact design provides comfortable
use for precision engraving performance.
- Replaceable points to engrave on soft or hard
Mitre Box
37.55
materials. $ Cat.# 50-55665....$13.75
ALUMINUM
Replacement Tips
Cat. # 80-4821 Carbide Tip $11.15 Razor Saw Cat.# 50-55001...$12.75
Cat. # 80-4822 Diamond Tip $32.15 CSA Approved
CAT.# 50-152

ENVIROTEX PROJECT BOOKS
ENVIROTEX EPOXY COATING Tile Art with Envirotex
THE ORIGINAL HIGH-GLOSS POLYMER COATING This Booklet shows you how to create your own tiles
easily from foam core board so you can tile many
surfaces. Make striking pictures or turn a plain wooden
The highest quality product on the market today. It is a wonderful tray into a stunning presentation. Cat #34-01028
preservative for any wood surface. It provides a rich glossy finish
to protect and beautify for years. It can be used on almost any
surface. One coat equals 50 coats of varnish. Patio & Home Decor w/Envirotex
This book has many beautiful project ideas using
Envirotex. It gives easy to follow instructions so that
Cat#34-01028 $9.95 Cat#70-1476 $8.95 professional results can be achieved. Cat# 70-1476
ure
Ask for your free idea sheets with these easy Meas
crafts using Envoritex Lite epoxy coating.
Mix
Cat.# 34-1025 Ultra Seal
Pour Use Ultra Seal to preserve original
wood, fabric and print colours, to
glue photos and prints, and to seal
end grain of wood prior to coating
with Envirotex.
Dough Art Pictures on Marble

Keepsakes Plates Finish
Cat.# Size Coverage 1 . 2-5 . 6+ .

.34-2007 4 oz (118 ml) 1 sq.ft. (.092 sq.m.) $9.155 $8.15 $7.75 1 gn 16 oz 4 oz
34-2008 8 oz (236 ml) 2 sq.ft. (.185 sq.m.) $12.85 $11.35 $10.70 Sealer • Glue • Quick Decoupage
34-2016 16 oz (473 ml) 4 sq.ft. (.371 sq.m.) $21.10 $18.55 $17.45 Cat.# Size 1 . 2-5 . 6+ .
52-00140 4 oz (118 ml) $11.25 $9.75 $8.50
34-2032 32 oz (946 ml) 8 sq.ft. (.743 sq.m.) $35.20 $33.40 $28.15 52-00159 16 oz (473 ml) $18.95 $16.45 $14.35
34-2064 64 oz (1.861 l) 16 sq.ft. (1.48 sq.m.) $63.00 $55.50 $52.50 52-00167 1 gn (3.78 l) $79.00 $71.00 $64.00
34-2128 1 Gn (3.78 l) 32 sq.ft. (2.92 sq.m.) $102.50 $94.50 –0
Quick Dry Lacquer Spray
34-1188-2G 2 GN (7.56l) 64 sq.ft. (5.84 sq.m) $170.50 $161.50$134.50
• Clear
CUPS, Latex Gloves • Seals
B PADDLES Use these gloves when coating with Envirotex • Finishes
& or Casting Resin for easy clean up. • Protects
BRUSHES Qty $/Kit
1 $9.90
C
A (for BULK 2-5 $8.90 340g
paddles,
see pg. 7)
6+ $7.90
spray Qty $/EA
can 1 $6.75
FIG CAT# DESCRIPTION 1 2-5 6-19 20-49 50+.
.A 34-1011 BRUSHES $0.28 $0.25 $0.23 $0.22 $0.21 CAT# 70-3419-00 LARGE
CAT.# 34-4016 MATTE 2-5 $6.10
B 34-1010 CUPS $0.48 $0.40 $0.38 $0.37 $0.36 CAT.# 70-3420-00 MEDIUM
C 34-1013 PADDLES $0.10 $0.08 $0.06 $0.04 $0.03 CAT.# 70-3421-00 SMALL CAT.# 34-4015 GLOSS 6+ $5.40
CSGX Industrial Epoxy Coating EX-88 Premium Epoxy Coating EX-74 Outdoor Epoxy Coating
CSGX High Gloss EX-88 is an extremely EX-74 is an extremely
Polymer Coating is an clear, tough, high gloss clear, tough, high gloss
extremely clear, tough, surface coating surface coating formulated
high gloss surface coating formulated to produce a to produce a deep glass
formulated to produce a deep glass like like appearance in a single
deep glass like appearance in a single layer on a sealed surface.
appearance in a single layer on a sealed EX-74 has been
layer on a sealed surface. surface. EX-88 has an formulated for improved
CSGX High Gloss extended "open time" UV resistance to reduce
Polymer Finish has up to 20 minutes in the mixing which allows up to 30 minutes in the mixing yellowing and surface
container at 70º F and up to 30 minutes working container at 70º F and up to one hour working degradation from UV exposure. EX-74 has an
time on the surface being coated. This high gloss time on the surface being coated. EX-88 is extended "open time" which allows up to 30
Polymer Coating is waterproof, heat & alcohol waterproof, heat & alcohol resistant. Used on minutes in the mixing container at 70º F and up to
resistant. restaurant table & bar tops for over 20 years. one hour working time on the surface being
coated. EX-74 is waterproof, heat & alcohol
mical, r
Econo t-up Qty $/Kit . Longe e Qty $/Kit . resistant. Qty $/Kit .
se g im
t UV
quick 1 $122.00 1 $170.50
workin ors 1 $183.00
2-UP $114.00 2-UP $161.50 In ibit
h 2-UP $173.00
Cat.#70-3406-00 Cat.#34-1188-2G 2
2 Gallon Kit Cat.#34-1174-2G
2 Gallon Kit
2 Gallon Kit
Clear Polyester Casting Resin Moulds for Casting
These polypropylene moulds can be used over and over again.
Clear polyester resin is perfect for embedding objects
such as coins, photos, shells, and other nic nacs.
Catalyst for Casting Resin A B C D
This is used as a hardener for
the casting resin.
Cat.# 52-46388 Cat.# 52-46361

E F G H
1/2 oz (15 ml) 1 oz (30 ml) Fig Cat. Size Price
$5.85 $6.35 A 52-43834 2” x 1 1/2” x 1” deep (5 cm x 4 cm x 3 cm) $4.95
B 52-43842 2 1/4” x 2 5/8” x 1 1/8” deep (6 cm x 7 cm x 3 cm) $4.95
C 52-43850 2 3/8” diam. x 1 1/8” deep (6 cm x 3 cm) $4.95
Water
$/Quantity D 52-43869 2 1/8” x 3 1/4” x 1 1/8” deep (5 cm x 8 cm x 3 cm) $4.95
Cat.# Size 1 . 2-5 . 6+
E 52-43877 3” diam. x 1 3/8” dome (8 cm x 3 cm) $6.70
52-00175
52-00183
Pint (473 ml)
Quart (946 ml)
$23.10
$34.05
$20.20
$31.30 Clear F 52-43885 3” x 3” x 1 1/16” deep (8 cm x 8 cm x 3 cm) $6.70
G 52-43893 3” x 5” x 1 1/16” deep (8 cm x 13 cm x 3 cm) $6.70
52-00191 Gallon (3.785 l) $99.00 $89.00 $85.00
H 52-43907 3” x 6” x 1 1/16” deep (8 cm x 15 cm x 3 cm) $6.70
EasyCast Low Odour Casting Resin Opaque Pigments Transparent Dyes

These opaque pigments can be used These can be used with polyester
WHAT IS EASYCAST? to create a solid colour layer. resin or EasyCast.
EasyCast is a reactive clear casting epoxy. It's solvent free and low odor. It These can be used with polyester Qty $/Each
can easily be colored, tinted or combined with fillers to create faux granite resin or EasyCast. 1 $7.35
or metallic castings. These characteristics make it ideal for casting and Qty $/Each
2-5 $6.70
embedding up to 6 ounces (maximum) per pour. Due to heat build up and 1 oz (30ml) 1 $7.35
6+ $5.85
2-5 $6.70
discoloration, do not attempt to cast more than 6 ounces at one time.
6+ $5.85
For larger casts, use Castin'Craft Polyester Casting Resin. Cat.# Colour
Cat.# Colour Size 52-46440 Pearl
52-46345 White 1 oz (30 ml) 52-46426 Red
52-46329 Green 1 oz (30 ml) 52-46434 Blue
52-46280 Blue 1 oz (30 ml) 52-46469 Green
52-46302 Red 1 oz (30 ml) 52-46477 Yellow
52-46299 Black 1 oz (30 ml)
52-46337 Yellow 1 oz (30 ml)
52-46353 Brown 1 oz (30 ml) 1 oz (30ml)
Mould Builder
This liquid latex rubber makes 3 dimensional moulds by brushing on the
Cat Description Price 1 2-5 "Easy Cast Resin surface of the object to be duplicated. Peel off the ready to use mould.
34-33008 EasyCast Epoxy 8oz $12.95 $11.35 Jewelry" Book
34-33016 EasyCast Epoxy 16oz $21.45 $18.75 By Marie Browning
34-33032 EasyCast Epoxy 32oz $35.20 $30.80
34-33128 EasyCast Epoxy 128oz $94.50 $89.00 Cat# 34-33552 $11.95
Liquid Latex
Easy Cast Resin Jewelry Molds Rubber
11 popular jewelry gem shapes on one
convenient tray. This tray of mould shapes
is made of durable, smooth, re-usable
polypropylene.
Cat Size Price 1 2-5 6-up
52-00779 Pint (473 ml) $14.70 $13.95 $13.00
Cat# 52-33610 ...........6.95 52-00787 Quart (946 ml) $24.50 $23.45 $22.75
52-00795 Gallon (3.785l) $76.50 $72.00
EasyMold Silicone Putty EasyMold Silicone Rubber

EasyMold Silicone Putty is ideal for a wide range of impression type mold EasyMold Silicone Putty is ideal for a wide range of mold applications,
applications, including Castin'Craft Clear Casting Resin, EasyCast Clear including Castin'Craft Clear Casting Resin, EasyCast Clear Casting Epoxy,
Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and
clay, concrete and low melt metals. low melt metals!
• Brushable/Pourable
• 3 Minute working time, 25 minute cure. • 45 Minute to 1 hour working time, 24 hour cure.
• Excellent detail from original. Cure rate can be adjusted by applying heat.
• Strong, flexible, reusable molds. • Produces extremely fine detail from original.
• High Heat range, up to 400º F. • Self releasing, no mold release agent required for
• No Shrinkage. most applications.
• Self releasing, no mold release agent required for most applications. • High heat range, up to 400º F.
• Strong flexible reusable molds.
* No vacuum equipment required.
Cat# 34-33700 1/2 lb kit......$17.95
Cat# 34-33710 1 lb kit.......$29.80 Cat# 34-33720 1 lb kit......$34.95
Cat# 34-33730 2 lb kit.......$64.00

Parts for All Your Lamp Making Needs
Fig Cat.# Description Pkg 1 .

Wiring Guide A 80-4429-WT White In-Line Switch ea $1.20
A B C D
A
B 80-4429-BN Brown In-Line Switch ea $1.20
C 80-4430-WT White Safety Plug ea $1.20
F D 80-4430-BN Brown Safety Plug ea $1.20
F E 80-4401-00 8” Detachable Harp (Finial Extra) ea $1.70
E 80-4402-00 10” Detachable Harp (Finial Extra) ea $1.95\
E
`E 80-4403-00 12” Detachable Harp (Finial Extra) ea $2.45
F 80-4405-00 Finial cap ea $0.50
G 80-4424-00 Candelabra Socket ea $1.95
J H 80-4421-00 Hex lock Nuts 25 $2.40
G
I 80-4423-00 Lock Washers for 3/8” Pipe 50 $1.04
K
J 80-4422-00 Steel Washers for 3/8” Hole 50 $7.25
L
H K 80-4409-00 2” Threaded Nipple 1/8” ips. 50 $14.65
M L 80-4408-00 1 1/2” Threaded Nipple 1/8” ips 50 $12.95
I
N M 80-4407-00 1” Threaded Nipple 1/8” ips 50 $7.95
N 80-4406-00 3/4” Threaded Nipple 1/8” ips 50 $5.00
O O 80-4410-00 Keyless Lamp Socket* without switch ea $3.00
P 80-4426-00 Lamp Socket with on/off ea $1.90
Q
R Q 80-4434-00 Phenolic Lamp Socket with Pull Chain ea $3.65
R 80-4414-00 9” Steel Pipe Threaded Both Ends 1/8”ips ea $1.00
S
S 80-4415-00 15” Steel Pipe Threaded Both Ends 1/8”ips ea $1.15
p
6’ Lamp Cord w/Plug 6’ Lamp Cord w/Plug Complete Lamp Kit

and Inline Switch CAT.# 80-44SPECL
Qty $/Each
8” Harp 1 $9.50
w/Finial 2-5 $9.15
6+ $8.65
Socket
Steel
White Only Washer
9” Pipe
6’ White
These 6’ (152 mm) lamp cords have a These 6’ (152 mm) lamp cords have a Cord
moulded plug and 3/4” stripped ends moulded plug and inline switch with3/4” stripped
ends
Cat# 80-4428-WT....$3.20 Cat# 80-4448-WT...$3.50 White 2 Hex Nuts
Cat# 80-4448-BN.. $3.50 Brown
Project Idea Lamp Shade Mason Jar Lamps
These lamp shades are made of white styrene Easily convert a mason jar into a lamp with this
which can easily be decorated or left as is. The mason jar lid and socket. You can fill the jar with
dimensions are 5” x 11” x 7.5” h (127 x 254 x 203 buttons, candy or leave empty.
mm). It fits on all our harps (see top of page). (Lid diameter is 2 1/2”)
Qty $/Each
1 $9.50
2-5 $9.05 Qty $/Each
6+ $8.55 1 $9.40
See clock 2-5 $8.95
inserts on page 6+ $8.45
52 CAT.# 80-4451-00
Cat.# 80-4441-00
Mason lid, socket and 6’ lamp cord.

24kt “Slimline” Pen & Pencil Kits “Classic” Style Kits Mont Blanc Style Kits
This is an elegant reproductions for the popular These designs resemble one of the most expensive
These kits are the easiest to make, a good seller and ideal for
“Parker” pen design. These styles are easy to writing instruments.
beginners as well as advanced turners. Numerous kits use 7mm T U
make because they are made with basic straight R S
tubes thus making 7mm accessories compatible for turning
cuts on the lathe.
many projects. Skills learned in turning the basic slimline pen
are easily transferred to making other projects. I J N P Q
O
H K L M
G
B C
D E F
Fig Cat# Hole Size Drill Bit Description Bushing 1-5 6-49 50-UP
A 12-PK-PEN 7MM 12-PK-7MM Slimline Pens 12PKMBUSH3 $4.45 $4.05 $3.80
B 12-PK-PCL 7MM 12-PK-7MM Slimline Pencil 12PKMBUSH3 $5.50 $4.60 $4.35
C 12PKPENA2B 7MM 12-PK-7MM Slimline Pen Black 12PKMBUSH3 $5.05 $4.75 $4.20
D 12PKPCLA2B 7MM 12-PK-7MM Slimline Pencil Black 12PKMBUSH3 $5.65 $5.30 $4.90
E 12PKPENSAT 7MM 12-PK-7MM Slimline Pen Satin 12PKMBUSH3 $4.90 $4.55 $4.20
F 12PKPCLSAT 7MM 12-PK-7MM Slimline Pencil Satin 12PKMBUSH3 $5.50 $5.15 $4.85
G 12PKPARKMG 8MM 12-PKPARK8 Magnifier Kit 12PKPARKBU $14.05 $12.65 $11.20
H 12PKPARKLO 8MM 12-PKPARK8 Letter Opener 12PKPARKBU $10.20 $9.40 $8.30
I 12PKPAR10R 10MM 12-PK10-10 Rollerball Pen 12PKPAR10B2 $8.70 $7.90 $7.15
J 12PKPAR10F 10MM 12-PK10-10 Fountain Pen 12PKPAR10B2 $12.50 $10.05 $9.65
K 12PKPARKPC 8MM 12-PKPARK8 Classic Twist Pencil 12PKPARKB3 $8.70 $7.90 $7.15
L 12-PKPARKG 8MM 12-PKPARK8 Classic Twist Pen 12PKPARKBU $8.70 $7.90 $7.15
M 12-PKPARKX 8MM 12-PKPARK8 Classic Click Pen 12PKPARKBU2 $8.70 $7.90 $7.15
N 12-PK-MONT 7MM 12-PK-7MM Designer Twist Pen 12PKMONTBU $6.90 $5.90 $5.70
O 12PKMONTPC 8MM 12-PKPARK8 Designer Twist Pencil 12PKMONTB4 $9.40 $8.35 $7.30
P 12PKMONTMN 7MM,3/16” 12PKMONTS2 Mini DesignerTwist Pen 12PKMONTB2 $7.65 $6.90 $6.30
Q 12PKMONTPA 8MM 12-PKPARK8 Premium Designer Twist Pen 12PKMONTB5 $7.05 $6.20 $5.75
R 12PKMONTRP VARIOUS 12PKMONTS3 Designer Roller Pen 12PKMONTB3 $8.70 $7.90 $7.15
S 12PKMONTFP VARIOUS 12PKMONS3 Designer Fountain Pen 12PKMONTB3 $13.15 $12.20 $11.30
T 12PKMONTLO 7MM 12-PK-7MM Designer Letter Opener 12PKMONTBU $8.95 $8.15 $7.15
U 12PKMONTMG 7MM 12-PK-7MM Designer Magnifer 12PKMONTBX $13.85 $12.25 $11.35
EZ Rosewood & Padauk Wood Aquapearl Pen Blanks

These E-Z Rosewood or Padauk mini & maxi This acrylic mixture emulates the rich contrasting
Padauk Rosewood Cat# 12-AQP01 White Pearl
blanks are ideal for Slimline pens (mini shades of real pearl. They are specially designed
for easy turning, you’ll need a sharp tool for best Cat# 12-AQP02 Gold Pearl
blanks) or Comfort pens (maxi blanks). They'll
Cat# 12-AQP03 Black & Gold
save you time and energy cutting and drilling results. These 5/8” blanks have been pre-drilled
Cat# 12-AQP04 Cranberry Black
your wood to size. The blanks come with a 7mm hole. They are 5” in length.
Cat# 12-AQP06 Green & Black
conveniently packaged in packs of 20 blanks,
Cat# 12-AQP07 Blue & Black
enough to make 10 complete Slimline or
Cat# 12-AQP08 Red, Blue, Gold
Comfort pens. Qty Price Cat# 12-AQP09 Maroon/Pearl
Fig Cat# Description Qty 1-5 6-49 50-up 1 $5.91 Cat# 12-AQP11 Blue Green/Pearl
A 12-PK-EZ1 Rosewood Mini Blks $16.75 $15.18 $13.69 2-5 $5.32 Cat# 12-AQP12 Spalted Gold
A 12-PK-EZ2 Rosewood Maxi Blks $16.75 $15.18 $13.69 6-up $4.59 Cat# 12-AQP13 Spalted Pearl
B 12-PK-EZ3 Padauk Mini Blks $16.75 $15.18 $13.69 12-AQP99 $38.81 Cat# 12-AQP14 Jet Black
B 12-PK-EZ4 Padauk Maxi Blks $16.75 $15.18 $13.69 Cat# 12-AQP99 Assorted 8/pkg
Pen Boxes
Grey Felt Black Velour Black Leatherette Grey Felt w/Clear Lid Rosewood Maple
Cat# 12-PK-BOX Cat# 12-PKBOX2 Cat# 12-PK-BOX4 Cat# 12-PK-BOX3 Cat#12PKBOXR1X single Cat# 12-PKBOXM1single
Cat#12PKBOXRF double Cat# 12-PKBOXM2 double
$2.98 $3.36 $4.025 $1.87 $4.72 $4.76

Bottle Stoppers Bottle Stopper Blanks
These decorative kits are perfect for that special bottle. They make ideal gifts. This blank is the perfect size for bottles
stoppers, tops, and/or any small project.
One each of our choice form the
popular woods shown to the left.
5/PKG
Fig Cat Description Qty1-5 2-5 6-up Cat# 12WXPCWIDE $ 21.76 5/PKG
A 12-BS1 Chrome Stopper $5.57 $4.81 $4.35
B 12-BS1TNG Gold T/N $7.36 $6.99 $6.38
C 12-BS2 Cork Stopper $3.79 $3.40
D 12-BS7 “T” Handle Corkscrew Kit $8.38 $7.70 $7.27
Turning Pens and Pencils Pen Turner’s Workbook

Second Editions
The definitive guide to turning writing
Expert turner and teacher, Barry Gross,
instruments. Projects show a wide variety
provides the latest techniques in this
of techniques to suit your abilities and
revised second edition of his best-selling,
tools. Tips and tricks reveal which jigs and
"Pen Turner's Workbook." New projects
fittings increase efficiency. An impressive
and updated information about pen finishes
bonus gallery of finished items includes:
and materials makes this book a must-have
Cat.# 70-1492-00 $19.95 addition to the workshop and pen turner's
library.
Cat.# 70-1469-00 $19.95
SHELLAWAX Cream & Liquid EEE Ultra Shine

Shellawax is a one application, foolproof friction polish made for use on the wood lathe. It is EEE" is a mild abrasive (Tripoli) in a paste. After sanding it is applied sparingly
the fastest and easiest to use polish of its kind on the market today, giving an instant shine to to the part with the lathe stopped and then rubbed down with the part spinning. If
all timbers. It can be applied in seconds, dries instantly producing a brilliant shine that can be you sand to 220 grit, EEE will take the finish to about 1200
handled immediately, is food and child safe and is water resistant. It can be applied over most grit removing previous sanding marks and producing a
oil finishes, sanding sealers, etc. without any adverse reactions. high lustre. EEE can also be used to "cut" any finish such
as shellac, lacquer, poly etc. Used after the finish has dried
The cream provides a flawless non streaking finish on large and small turnings. to "finish the finish" it will remove unevenness and give a
It buffs to a rich deep durable shine on wood carvings or flat wood. polished appearance. EEE is also used to restore old
finishes by hand rubbing. It is one of the few paste
The liquid is more suitable for small turnings and provides a superior shine and abrasives on the market that will not colour raw wood or
finish. the existing finish.
Cat.# 12-PKSWAX $34.20 300 ml
Shellawax Cream
Cat.# 12-PKSWAXL $29.95 250 ml Cat.# 12-PKSWEEE $22.10 250 ml
Shellawax Liquid Ultra fine cut ‘n’ polish wax for turners and restorers.
Cat.# 12-PKSWAXS $5.95 1 oz
Shellawax Sampler
Mandrels & Bushings A B C D

The pen mandrel mounts between the lathe’s Standard Mandrels
headstock and tailstock. the pen tubes with glued A 12-PKM-ALX . . . . . . . . .3/4” x 16tpi-Screw on . . . . . . .$35.96
E . . . . . . . .(Carba-Tec, TLCPLUS, Ryobi, Sears)
up wood are separated and aligned with the pen B 12-PKM-BL . . . . . . . . . .1” x 8tpi -Screw on . . . . . . . .$26.74
bushings and slide on the mandrels. Mandrels are F
. . . . . . . . .(TCLPRO, TCLPROVS, Delta, Jet)
available for various lathe headstock styles. The C 12-PKM-CL . . . . . .Slip-on 5/8”-no thread-Slip on . . . . .$37.36
pen bushings serve two purposes. They indicate . . . . . . . . . . . . . . . . . .(Shopsmith)
the final diameter of the wood on the pen tubes and D 12-PKM-DL . . . . . . . . . .Drill Chuck Mandrel . . . . . . . . .$17.26
they have steps to mount larger diameter tubes onto . . . . . . . . . . . .(Any lather with drill chuck)
the mandrel. Every pen kit requires a specific set of Maxi-Mandrels
E 12-PKM-ELX . . . . . .#1 Morse Taper Maxi Mandrel . . . . .26.44
appropriate bushings but all kits are turned on the . . . . . . . .(Carba-Tec, TLCPLUS, Ryobi, Sears) . .
basic pen mandrel. F 12-PKM-FL . . . . . .#2 Morse Taper Maxi Mandrel . . . . .$18.79
. . . . . . . . .(TCLPRO, TCLPROVS, Delta, Jet)

Touch Tone Music Movements Wind-up Music Movements
These wind up music
These electronic music modules movements have a clear,
have a 64 note range, plays up to resonant sound and up to 3
55 seconds and have a long minutes play time. A T-bar
lasting battery. You press the key is included and it has a
metal top to play the tune. removable shell & base.
Qty $/ ea
1 $9.75
Qty $ /ea 2-5 $9.00
1 $3.75 6-up $7.50
2-5 $3.45 Melody Touch Tone
6-19 $3.15 Amazing Grace 70-1201-00
Melody Touch Tone 20-49 $2.80 Brahms Lullaby 70-1204-00
Brahms Lullaby 70-5701-00 50+ $2.50 Silent Night 70-1208-00
It’s a Small World 70-5703-00 Greensleeves 70-1209-00
Somewhere Over the Rainbow 70-5704-00 Twinkle, Twinkle 70-1211-00
Christmas Melody 70-5708-00 Danny Boy 70-1213-00
Happy Birthday 70-5710-00
Silent Night 70-5711-00 Wire-Style On/Off Lever
You Are My Sunshine 70-5712-00
Attaches easily to musical mechanism. Loosen one screw
holding comb, slip lever underneath and retighten screw.
Piggy Bank Plugs
These 1 1/4” (31 mm) plastic or rubber bank plugs are excellent for your own
bank creations. The rubber plugs are used with ceramic or acrylic or any other
thin material. The polypropylene plugs are great with wooden banks.
Plastic Bank Plugs Rubber Bank Plugs
CAT.# 70-1225-00..$5.30 5/PKG
Cat.# 80-4281-00....$3.00 10/pkg Cat.# 80-4282-00....$3.3.0 10/pkg Turn Tables

Turntables are available for the
Wooden Banks You Can Make music movements above.
They fit in place of the key.
Thieves will be hard-pressed to find the plugs that keep your
money safe in these scroll saw and bandsaw banks. Each 2 1/4”
bank features a plug that is an integral part of the original
design. Full color photographs of the finished banks and base
shop-tested patterns for both the scroll saw and the band (64 mm)
saw make cutting and assembly easy.
Cat.# 70-1461 $24.55
Cat.# 70-1220-00.....$1.80 ea
Key Chains Rubber Bumpers Magnet Disc & Strips

These self-adhesive These magnetic strips and discs
CLEAR
Qty $ /pkg
slip resistant pads are have many uses around home,
1-00 1 $1.51
8 -420
0 excellent for finished school and office. The strip can
2- 2-5 $1.30
80-420 projects. Each rubber
BLACK 6-19 $1.18 be cut to any length.
3-00 bumper is 3/8” x 1/8”
80-420 20-49 $0.99
WHITE (10 mm x 3 mm).
50+ $0.96
Cat.# 80-4285-00 ½x
BLACK Strip 1/2”x30” 30”
Qty $/Pkg & WHITE strip
CLEAR ½”
g 1 $9.95 56/pad Diam
4” Lon
Qty $ Pad Qty $ Pad Qty $ /pkg
2-5 $9.45 10/pkg
1 $7.70 Available 1 $6.15 1 $2.45
6-19 $9.20 2-5 $5.85
2-5 $7.30 in clear, 2-5 $2.20
20-up $8.35 6-19 $5.55
6-19 $6.95
black, 20-49 $5.25
6-19 $2.00
Cat.# 80-4286-00
20-49 $6.65 20-49 $1.75
CAT.# 80-4215-00 NICKEL 50+ $6.30 & white 50+ $5.00 Disc 10/pkg 1/2” x 3/16”
50+ $1.55
CAT.# 80-4216-00 BRASS

Hanging Devices
Brass Plated Hangers Sawtooth Hangers Self Nail Hangers Triangle Hangers
1/2” x 1” (13 x 25mm) 2 3/4” x 5/16” (70 x 8mm) 1” x 1/4” (25 x 6mm) 1 1/8” x 1/2” (29 x 13mm)
Cat# 70-2602-06 Cat# 70-2602-01 Cat# 70-2602-02 Cat# 70-2602-03
$1.75 25/pkg $1.19 10/pkg $1.35 10/pkg $.85 10/pkg
A Brass Hardware H
C F
B E
D
I
G
$/Pkg
Fig Cat# Size Description Pkg 1 2-5 6-19 20-49 50+
A 70-2607-05 1” x 1” (25 x 25 mm) Bright Brass 2 $3.70 $3.40 $3.20 $2.95 $2.85
B 70-2607-13 2” X 1 3/8” (50 x 35 mm) Antique Brass 2 $4.75 $4.50 $4.30 $4.05 $3.85
C 70-2612-05 1/2” diam x 3/8” (13 mm x 10 mm) Brass Knobs 2 $2.85 $2.55 $2.30 $2.10 –
D 70-2612-03 5/8” diam x 7/16” (16 mm x 11 mm) Brass Knobs 2 $6.45 - - - -
E 70-2617-09 84 x 67 mm (3 5/16” 2 5/8” Antique Corners 2 $10.00 $8.50 $8.25 – –00
F 70-2608-08 25 mm (1”) Brass Turn Buttons 4 $1.25 $1.15 $1.05 $0.95 –00
G 70-2620-10 10 mm (3/8”) Brass Pins 100 $2.35 $1.95 $1.86 $1.77 $1.67
H 70-2608-01 33 x 23 mm (1 5/16” x 15/16”) Brass Clasp 2 $4.35 $4.10 $3.50 $3.15 $2.95
I 70-2608-15 32 mm (1 1/4”) Latch Hook 2 $3.95 $3.55 $3.35 $3.15 -
Magnetic Key Chains Assorted Key Rings

2 Part Key
Catches Key Ring Snaps
Snaps Rings S plit Rings
This 1/2” magnetic catch comes
with plate and screws.
1”
A B C D
Qty $/Pkg 3/4”

4” Long
1 $9.95
100/pk 6/pkg 2/pkg 24/pkg
Qty $/Pkg2 2-5 $9.45
1 $2.75 (See bulk 6-19 $9.20 Fig Cat# Description Qty 1 2-5 6-19 20-49 50-UP
2-5 $2.60 chain on 20-up $8.35 A 80-4222-00 Nickel Key RIng Snaps $1.65 $1.50 $1.30 $1.05 .95
6-19 $2.45 page 33) B 80-4221-00 Brass Key RIng Snaps $2.00 $1.85 $1.65 $1.25 $1.20
20+ $2.35 C 80-4223-00 2 Part Key Rings $3.15 $2.85 $2.50 $2.15 $2.00
CAT.# 80-4215-00 NICKEL D 80-4227-00 1” Split Rings 24/pkg $2.15 $1.90 $1.70 $1.50 $1.40
CAT.# 70-2608-20 2/PKG CAT.# 80-4216-00 BRASS E 80-4225-00 3/4” Split Rings 24/pkg $1.95 $1.70 $1.50 $1.40 $1.30

Brand Your Mark
Use this tool on furniture, wood, or leather. The letters are These tools are CSA approved. A flame heated tool
3/16” (5 mm) high. 20 Letters, spaces or punctuation marks (65-7100) is also available. Please enquire about price.
are allowed per line.
Option 1 $126.00 Option 2 $139.00 Option 3 $377.00
Makers Mark Custom Mark Logo Mark
Cat# 65-8100 Cat# 65-8300 Cat.# 65-8400
Identify your work with This allows you to add a Have your logo, signature
a professional touch custom message of your choice or emblem reproduced
(Clear black & white
HANDCRAFTED BY AN ORIGINAL BY artwork must be provided)
your name FRANK’S WOODCARVING
STORAGE CASE
Cat.# 65-DS40 $11.95

Request with order It is a very economical tool providing 125 watts,
Options:
branding of many softer materials such as leather,
Cat.# 65-0007Extra Third Line add ..$29.70 plastic and soft woods. The maximum plate size is
Cat.# 65-0009 1/8” Lettering add $26.00 1” x 2 3/4” or 1 3/4” x 1 3/4”.
Decorator Branding Kit

This tool opens up a whole world of creativity for decorating many articles such
as wooden items, picture frames, leather articles, furniture, cabinets, jewelry
and much more. You can purchase the wood burning, solder tips or the
decorator tips.
Actual Tip Size
Features
• 30 watt tool
• Maximum temperature of 1,050 f (565 º C)
• Stay cool grooved handle for comfort
Multi Purpose Kit Cat# 65-L30DBK $40.00

7 Stylized Decor Brands & 2 Freehand tips
Includes a 30watt tool, 7 stylized decor brands plus 2
Order extra tips Cat#80-4832DT1 $16.90
freehand tips.
Button Maker
Design graphics on your computer then make your own buttons at home or in
your classroom! It makes 2 1/4” ( 57
mm) buttons easily. CIRCLE CUTTER
• FUND RAISING We also
• SOUVENIRS supply buttons
for other
• AWA R D S badge makers.
• PHOTOGRAPHS $239.50
• CRAFT PROJECTS
Cut a 2 5/8” circle easily with this cutter. Ideal
CAT.#15-225-PBM BUTTON MAKER
This includes free parts to make 25 buttons.
for button maker..Cat.# 15-2625-CP
$360.00
BULK BUTTONS Cat.# 15-5401
Sample Projects 500 Button Pkg
BUTTONS Qty $ Each $85.00, 2+ $75.00
Cat.# 15-225-BT 1 $6.95
Package of 25 button 2-5 $6.75 Cat.# 15-5402
assemblies. One package is 6-19 $6.40 2000 Button Pkg
included with the button maker. 20-49 $4.55 $240.00, 2+
Please see right for bulk buttons. 50+ $4.25 All parts required
$225.00

Alumide & Wet/Dry Paper Sanding Sponges Crepe Cleaner
This abrasive belt and disc cleaner, made
This flexible sanding sponge is from crepe, can triple the life of your
All sheets are ideal for corners and contoured sandpaper. When it is held against a belt
surfaces. To clean just rinse with or disc while in motion, it will strip out
9”x11” soap and water and reuse. accumulated dust fibre. The block is 8” x
2” x 2” ( 20 x 5x 5 cm) in size.
0
Bulk 5
/pkg
Sheets
Qty $/Pkg
1 $2.85
2-5 $2.70
6+ $2.60
Cat.# 80-2804-00 Fine-Medium

Cat.# 80-2805-00 Medium Course CAT.#80-2800-00.....$10.55
$/Package of 50 .
Cat.# Grit Description 1 . 2+ . Shaker & Mug Sandvik Hobby File
80-2817-12 50D Alumide $30.45 $28.70
Pegs
80-2817-14 80D Alumide $22.90 $21.60
80-2817-09 100C Alumide $14.25 $13.40 (9 CM)
80-2817-03 120A Alumide $21.00 $19.80
3 1/2” SIZE
1/2 PIN
80-2817-05 180A Alumide $14.25 $13.40
Qty $/ea
80-2817-06 220A Alumide $14.25 $13.40
1 $ .50
80-2818-15 180C Silicon Waterproof Paper $27.85 $26.25 2-5 $ .46
80-2818-01 220A Silicon Waterproof Paper $26.95 $25.40 6-19 $ .44 This File has rasp cut for rough filing of wood,
plywood and soft plastics and double cut for
20-49 $ .42 A B filing hard plastic, steel and formica. This is
80-2818-04 320A Silicon Waterproof Paper $26.95 $25.40 50+ $ .39 our best multi-purpose file. The length is 8”
80-2818-06 400A Silicon Waterproof Paper $26.95 $25.40 (20 cm).
Fig Cat.# Description
80-2818-08 600A Silicon Waterproof Paper $26.95 $25.40 A 70-2656-00 Mug Peg
B 70-2655-00 Shaker Peg
CAT.# 50-152.....$18.65
Coping Saw Needle Files Birch Buttons 100/PKG Manual Hand Drill
This professional quality coping saw has a sturdy
steel frame. Blade tension is achieved by turning
These handy needle files come 12
the wood handle. Easily adjustable blade fixtures per package in a folding pouch.
and an extra narrow specially hardened blade
are among the features. The blade has 5 points
CAT.# 50-301 COPING SAW

$21.95 Each This drill has completely enclosed
2 for gears. Drill bits can be stored in the
$20.65 Each handle. It will take drill bits up to 8
mm . (Bits not included).
Cat# 83-1133-00. . $19.95
Cat.# For Hole Size 1 . 2-5 . 6+ . DRILL BITS

83-1501 3/8” (10 mm) $5.15 $4.65 $4.15 13 Bits 1/16”-1/4”
CAT# 50-303 REPL BLADES 5/PKG CAT.# 80-3008-00 $9.00 83-1502 1/2” (13 mm) $5.95 $5.35 $4.80 Cat# 83-1132-00
QTY 1 $5.85 2+ $5.70 $6.25
Professional Wood Burning Multipurpose Tool

This professional tool has a thin handle with your fingers just This tool opens up a whole world of creativity
inches away from your work for greater control.
$
40.00 for decorating many articles such as wooden
items, picture frames, leather articles,
Cat# 80-4850-00 furniture, cabinets, jewelry and much more.
You can purchase an extra set of wood
burning/solder tips or the decorator tips.
(Tool comes with standard tip) Features
• 30 watt tool
Cat.# Description 1 DIAL-TEMP CONTROL • Maximum temperature of 1,050 f (565 º C)
Standard Replacement Tips
80-4850-00 Woodburning Tool $52.50 • Stay cool grooved handle for comfort
Use this hand control to Cat.#80-4832-08 2/pk $7.05
80-4850-03 Standard Tip $9.10. lower the temperature of
80-4850-01 Needle Tip $9.30 . the wood burning tools.
Multi Purpose Kit Cat# 80-4832-00....$40.00
80-4850-02 Blank Tip $9.10 It is great for detail work.
80-4850-04 Feather $9.10 . Includes 3 Soldering Tips, 4 Woodburning Tips,
80-4850-08 Dial-Temp Control $62.50 2 Cutting/Fusing Tips plus solder and handy stand and case.

A clock dials . . . . . . . . . . . . . . . . . . . . . . . . . .51 glass bezels . . . . . . . . . . . . . . . . . . . . . . . . .50
acrylic domes . . . . . . . . . . . . . . . . . . . . . . . .35 clock hands . . . . . . . . . . . . . . . . . . . . . . . . .48 glasses safety . . . . . . . . . . . . . . . . . . . . . . . .34
acrylic hinges . . . . . . . . . . . . . . . . . . . . . . . .35 clock making resources . . . . . . . . . . . . . .44,45 glider kits . . . . . . . . . . . . . . . . . . . . . . . . . . .25
acrylic mirror . . . . . . . . . . . . . . . . . . . . . . . .27 clock movements . . . . . . . . . . .46,47,52,53,57 gloves latex . . . . . . . . . . . . . . . . . . . . . . . . .61
acrylic rod, tubing,square,balls,domes,cubes 35 clock numbers . . . . . . . . . . . . . . . . . . . . . . .49 glue cups . . . . . . . . . . . . . . . . . . . . . . . . . . .19
acrylic sheets . . . . . . . . . . . . . . . . . . . . . . . .33 clock plans . . . . . . . . . . . . . . . . . .44,45,54,55 glue gun . . . . . . . . . . . . . . . . . . . . . . .19,31,60
air motor car kit . . . . . . . . . . . . . . . . . . . . . . .5 clock supplies . . . . . . . . . . . . . . . . . . . . . . . .46 glue plastic cement . . . . . . . . . . . . . . . . . . . .34
alligator leads . . . . . . . . . . . . . . . . . . . . . . .12 clothes pegs . . . . . . . . . . . . . . . . . . . . . . . . . .8 glue sticks . . . . . . . . . . . . . . . . . . . . . . . .60,19
altitude finder . . . . . . . . . . . . . . . . . . . . . . . .24 co2 cartridges . . . . . . . . . . . . . . . . . . . . . . . . .2 glue wood . . . . . . . . . . . . . . . . . . . . . . . . . .19
aluminum clips . . . . . . . . . . . . . . . . . . . . . . .13 construction kits . . . . . . . . . . . . . . . . . . . . . .18 goggles . . . . . . . . . . . . . . . . . . . . . . . . . .32,34
applicator for solvent . . . . . . . . . . . . . . . . . .34 coping saw . . . . . . . . . . . . . . . . . . . . . . .32,69 grandfather dials . . . . . . . . . . . . . . . . . . . . .55
arbour adaptor . . . . . . . . . . . . . . . . . . . . . .35 copper foil . . . . . . . . . . . . . . . . . . . . . . . . . .12 grandfather movements . . . . . . . . . . . . . . . .55
architectural model supplies . . . . . . . . . . . . .18 copper wire . . . . . . . . . . . . . . . . . . . . . . . . .12 grandfather plans . . . . . . . . . . . . . . . . . . . .55
artstraws . . . . . . . . . . . . . . . . . . . . . . . . . . .20 cordless drill . . . . . . . . . . . . . . . . . . . . . . . . .30 gussets . . . . . . . . . . . . . . . . . . . . . . . . . . .8,19
atomic clocks . . . . . . . . . . . . . . . . . . . . . .56,58 corks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 H
automata kits . . . . . . . . . . . . . . . . . . . . . . . .16 corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 hack saws . . . . . . . . . . . . . . . . . . . . . . . . . .21
axle gussets . . . . . . . . . . . . . . . . . . . . . . . . . .8 corrugated plastic . . . . . . . . . . . . . . . . . .20,33 hammers . . . . . . . . . . . . . . . . . . . . . . . . . . .31
axle holders . . . . . . . . . . . . . . . . . . . . . . . . . .8 covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 hand drill /drill bits . . . . . . . . . . . . . . . . .21,69
axles . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,4,7 crank & slider kits . . . . . . . . . . . . . . . . . . . .16 hand generator kit . . . . . . . . . . . . . . . . . . . . .5
B crepe cleaner . . . . . . . . . . . . . . . . . . . . . . . .69 hand protectors . . . . . . . . . . . . . . . . . . . . . .57
balloon jet car kit . . . . . . . . . . . . . . . . . . . . . .6 CSGX epoxy coating . . . . . . . . . . . . . . . . . . .61 hands . . . . . . . . . . . . . . . . . . . . . . . . .48,57,58
balsa sheets . . . . . . . . . . . . . . . . . . . . . . . . .20 cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
balsa wood . . . . . . . . . . . . . . . . . . . . . . .19,20 cuckoo clock movements . . . . . . . . . . . . . . .47 hardware . . . . . . . . . . . . . . . . . . . . . . . . . . .57
baltic birch . . . . . . . . . . . . . . . . . . . . . . . . . .22 cuckoo clock plans . . . . . . . . . . . . . . . . . . . .54 harp, lamp . . . . . . . . . . . . . . . . . . . . . . . . . .63
barometer movements . . . . . . . . . . . . . . . . .56 cups mixing . . . . . . . . . . . . . . . . . . . . . . . . .61 heating trays . . . . . . . . . . . . . . . . . . . . . . . .36
basswood . . . . . . . . . . . . . . . . . . . . . . . . . . .19 cutting knife . . . . . . . . . . . . . . . . . . . . . .31,34 heavy duty punches . . . . . . . . . . . . . . . . . . .32
basswood blanks . . . . . . . . . . . . . . . . . . . . . .2 cutting mat . . . . . . . . . . . . . . . . . . . . . . .19.31 helicopter . . . . . . . . . . . . . . . . . . . . . . . . . . .25
basswood joiners . . . . . . . . . . . . . . . . . .21,30 D hermle chime movements . . . . . . . . . . . . . . .47
basswood sheets . . . . . . . . . . . . . . . . . . . . .20 decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 high gloss epoxy coating . . . . . . . . . . . . . . .61
basswood strips . . . . . . . . . . . . . . . . . . . . . .18 decorator branding kit . . . . . . . . . . . . . . . . .68 high power gear box . . . . . . . . . . . . . . . . . .17
batteries . . . . . . . . . . . . . . . . . . . . . . . . .14,48 delta dart . . . . . . . . . . . . . . . . . . . . . . . . . . .25 high torque movement . . . . . . . . . . . . . . . . .58
battery holders . . . . . . . . . . . . . . . . . . . . . . .14 design & make folios . . . . . . . . . . . . . . . . . .40 hilltop challenge DVD . . . . . . . . . . . . . . . . . .22
battery tester . . . . . . . . . . . . . . . . . . . . . . . .14 design-a- dial kits . . . . . . . . . . . . . . . . . . . . .58 hinges,acrylic . . . . . . . . . . . . . . . . . . . . . . . .35
battery tester . . . . . . . . . . . . . . . . . . . . . . . .14 desk pens . . . . . . . . . . . . . . . . . . . . . . . . . . .59 hinges,brass . . . . . . . . . . . . . . . . . . . . . . . . .67
bench hook . . . . . . . . . . . . . . . . . . . . . .21,30 dials . . . . . . . . . . . . . . . . . . . . . . . . . . . .50,51 hobby files . . . . . . . . . . . . . . . . . . . . . . .32,69
bezels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 digital multi meter . . . . . . . . . . . . . . . . . . . .14 hole punches . . . . . . . . . . . . . . . . . . . . . .32,60
birch buttons . . . . . . . . . . . . . . . . . . . . . . . .69 display stands . . . . . . . . . . . . . . . . . . . . . . .57 hooked mass set . . . . . . . . . . . . . . . . . . . . .27
blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 domes,acrylic . . . . . . . . . . . . . . . . . . . . . . . .35 hot wire . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
boat hull moulds . . . . . . . . . . . . . . . . . . . . .39 double sided tape . . . . . . . . . . . . . . . . . . . . .32 hotshot launcher . . . . . . . . . . . . . . . . . . . . . . .3
boat propellers . . . . . . . . . . . . . . . . . . . . . . .13 dowels . . . . . . . . . . . . . . . . . . . . . . . . .7,20,28 house building kits . . . . . . . . . . . . . . . . . . . .18
books . . . . . . . . . . . . . . . . . . . . . .40,41,42,43 dragster launcher . . . . . . . . . . . . . . . . . . . . . .3 hub 12 hole . . . . . . . . . . . . . . . . . . . . . . . . .28
bore bits forstner . . . . . . . . . . . . . . . . . . . . .60 dragster supplies . . . . . . . . . . . . . . . . . . . . .2,3 hydraulic kits . . . . . . . . . . . . . . . . . . . . . . . .22
bottle rocket launcher . . . . . . . . . . . . . . . . . .25 drill bits . . . . . . . . . . . . . . . . . . . . . . . . . .21,34 hydraulic supplies syringes etc . . . . . . . . . . .23
bottle stoppers . . . . . . . . . . . . . . . . . . . . . . .64 drill press vice . . . . . . . . . . . . . . . . . . . . . . .32 hygrometer movements . . . . . . . . . . . . . . . .56
boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 drive bands . . . . . . . . . . . . . . . . . . . . . . . . .25 I
boxes for pens . . . . . . . . . . . . . . . . . . . . . . .64 dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 injection moulding . . . . . . . . . . . . . . . . . . . .37
branding iron . . . . . . . . . . . . . . . . . . . . . . . .68 E inserts,quartz . . . . . . . . . . . . . . . . . . . . .52,53
branding kits . . . . . . . . . . . . . . . . . . . . . . . .68 earth magnets . . . . . . . . . . . . . . . . . . . . . . .15 inventa packs . . . . . . . . . . . . . . . . . . . . . . . .11
brass connectors . . . . . . . . . . . . . . . . . . . . . .20 easycast . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 J
brass ferrules . . . . . . . . . . . . . . . . . . . . . . . .59 edge scraper . . . . . . . . . . . . . . . . . . . . . . . .34 jinks jointer . . . . . . . . . . . . . . . . . . . . . . .21,30
brass hardware . . . . . . . . . . . . . . . . . . . . . .67 elastic band car kit . . . . . . . . . . . . . . . . . . . . .5 jinks wood . . . . . . . . . . . . . . . . . . . . . . . . . .19
brass knobs . . . . . . . . . . . . . . . . . . . . . . . . .67 electric car kit . . . . . . . . . . . . . . . . . . . . . . .5,9 jointers 8mm & 10mm . . . . . . . . . . . . . . . . .21
brass weight shells . . . . . . . . . . . . . . . . . . . .57 electric lamp cords . . . . . . . . . . . . . . . . . . . .63 K
breadknife blades . . . . . . . . . . . . . . . . . . . .59 electric motor sets . . . . . . . . . . . . . . . . . . . . .29 kaleidoscope . . . . . . . . . . . . . . . . . . . . . . . .27
brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 electric movement . . . . . . . . . . . . . . . . . . . . .58 key chain . . . . . . . . . . . . . . . . . . . . . .33,66.67
buffing compound . . . . . . . . . . . . . . . . . . . .35 electricity . . . . . . . . . . . . . . . . . . . . . . . . . . .12 key rings . . . . . . . . . . . . . . . . . . . . . . . . . . .67
buffing wheels . . . . . . . . . . . . . . . . . . . . . . .35 electricity kit . . . . . . . . . . . . . . . . . . . . . . . . .13 kidder kutter . . . . . . . . . . . . . . . . .19,21,31,60
bulb holders . . . . . . . . . . . . . . . . . . . . . . . . .12 emx-1/emx-2 . . . . . . . . . . . . . . . . . . . . . . . .36 kits mechanical . . . . . . . . . . . . . . . . . . . . . . .17
bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 knobs brass . . . . . . . . . . . . . . . . . . . . . . . . .67
bulk bead chain . . . . . . . . . . . . . . . . . . . . . .33 engraver . . . . . . . . . . . . . . . . . . . . . . . . . . .60 L
button maker . . . . . . . . . . . . . . . . . . . . . . . .68 engraving stock . . . . . . . . . . . . . . . . . . . . . .33 lacquer sprays . . . . . . . . . . . . . . . . . . . . . . .61
buzzers . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 envrirotex lite . . . . . . . . . . . . . . . . . . . . . . . .61 laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
C epoxy coating . . . . . . . . . . . . . . . . . . . . . . .61 lamp cords . . . . . . . . . . . . . . . . . . . . . . . . . .63
c clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 ex-74 epoxy . . . . . . . . . . . . . . . . . . . . . . . .61 lamp kits . . . . . . . . . . . . . . . . . . . . . . . . . . .63
c02 dragster supplies . . . . . . . . . . . . . . . . .2,3 ex-88 epoxy . . . . . . . . . . . . . . . . . . . . . . . .61 lamp making . . . . . . . . . . . . . . . . . . . . . . . .63
c02 eliminator supplies . . . . . . . . . . . . . . . . . .4 eyelets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 lamp shades . . . . . . . . . . . . . . . . . . . . . . . . .63
cable driven chime movement . . . . . . . . . . .55 F latch hooks . . . . . . . . . . . . . . . . . . . . . . . . . .67
cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . .32 f1 racing supplies . . . . . . . . . . . . . . . . . . . . . .4 latex gloves . . . . . . . . . . . . . . . . . . . . . . . . .61
cams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 fahnstock clips . . . . . . . . . . . . . . . . . . . . . . .12 latex liquid rubber . . . . . . . . . . . . . . . . . . . .62
candle cups . . . . . . . . . . . . . . . . . . . . . . . . .59 fan box type . . . . . . . . . . . . . . . . . . . . . . . .28 launcher c02 . . . . . . . . . . . . . . . . . . . . . . . . . .3
capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . .28 felt bumpers . . . . . . . . . . . . . . . . . . . . . . . . .59 led voltmeter . . . . . . . . . . . . . . . . . . . . . .14,28
car kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 files . . . . . . . . . . . . . . . . . . . . . . . .31,32,60,69 leds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
card disks . . . . . . . . . . . . . . . . . . . . . . . . . . .16 fitups,quartz inserts . . . . . . . . . . . . . . . . .52,53 levers & linkages kit . . . . . . . . . . . . . . . . . . .30
card wheels . . . . . . . . . . . . . . . . . . . . . . . .8,16 fluid power challenge DVD . . . . . . . . . . . . . .22 lift bridge kits . . . . . . . . . . . . . . . . . . . . . . . .18
cardboard gussets . . . . . . . . . . . . . . . . . . . .19 foam wing cutter . . . . . . . . . . . . . . . . . . . . .26 light bulbs . . . . . . . . . . . . . . . . . . . . . . . . . .12
casting resin . . . . . . . . . . . . . . . . . . . . . . . . .62 forstner bits . . . . . . . . . . . . . . . . . . . . . . . . .60 light sockets . . . . . . . . . . . . . . . . . . . . . .12,63
c-clamps . . . . . . . . . . . . . . . . . . . . . . . . .21,30 front wheels . . . . . . . . . . . . . . . . . . . . . . . .2,4 long pendulum drive . . . . . . . . . . . . . . . . . .47
cd washers . . . . . . . . . . . . . . . . . . . . . . . . .6,7 G lynx gear jig . . . . . . . . . . . . . . . . . . . . . . . .16
chain driven chime movement . . . . . . . . . . .55 gear box kits . . . . . . . . . . . . . . . . . . . . . . . .17 lyre attachment . . . . . . . . . . . . . . . . . . . . . .46
chime clock movements . . . . . . . . . . . . . . . .47 gear racks . . . . . . . . . . . . . . . . . . . . . . . . . .10 M
circle punch . . . . . . . . . . . . . . . . . . . . . . . . .68 gears . . . . . . . . . . . . . . . . . . . . . . . . .10,13,28 magnet packs . . . . . . . . . . . . . . . . . . . . . . . .15
generator kit . . . . . . . . . . . . . . . . . . . . . . .5,13 magnet strips/disks . . . . . . . . . . . . . . . . . . .66
magnetic catches . . . . . . . . . . . . . . . . . . . . .67 plastic spools . . . . . . . . . . . . . . . . . . . . . . . . .8 soldering iron . . . . . . . . . . . . . . . . . . . . . . . .14
magnetic levitation supplies . . . . . . . . . . . . . .7 plastic stands . . . . . . . . . . . . . . . . . . . . . . . .57 soldering stand . . . . . . . . . . . . . . . . . . . . . . .30
magnets . . . . . . . . . . . . . . . . . . . . . . . . . .7,15 plexiglass . . . . . . . . . . . . . . . . . . . . . . . . . . .33 spheres . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
magnifier . . . . . . . . . . . . . . . . . . . . . . . . . . .27 plexweld . . . . . . . . . . . . . . . . . . . . . . . . . . .34 spools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
mandrel . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 spring scale . . . . . . . . . . . . . . . . . . . . . . . . .27
manual hand drill . . . . . . . . . . . . . . . . . . . . .21 pneumatic lifer kit . . . . . . . . . . . . . . . . . . . .22 start pin assembly . . . . . . . . . . . . . . . . . . . . .3
marbles . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 pneumatic platform . . . . . . . . . . . . . . . . . . .39 steam engine . . . . . . . . . . . . . . . . . . . . . . . .29
markers . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 pneumatics materials . . . . . . . . . . . . . . . .23,24 stick cutter . . . . . . . . . . . . . . . . . . . . . . . . . .31
masking tape . . . . . . . . . . . . . . . . . . . . . . . .32 polish for plastic . . . . . . . . . . . . . . . . . . .34,35 straightline bender . . . . . . . . . . . . . . . . . . . .36
mason jar lamp kits . . . . . . . . . . . . . . . . . . .63 polish for wood turning . . . . . . . . . . . . . . . .65 straws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
mdf wheels . . . . . . . . . . . . . . . . . . . . . . . . . .8 polyethylene powder . . . . . . . . . . . . . . . . . .39 string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
memo holder . . . . . . . . . . . . . . . . . . . . . . . .59 pop bottle launcher . . . . . . . . . . . . . . . . .22,25 strip heaters . . . . . . . . . . . . . . . . . . . . . . . . .36
merkur kits . . . . . . . . . . . . . . . . . . . . . . . . .29 popsicle sticks . . . . . . . . . . . . . . . . . . . . . .7,20 structures . . . . . . . . . . . . . . . . . . . . . . . . . . .18
mes bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . .12 power control . . . . . . . . . . . . . . . . . . . . . . . .36 sun-up car kit . . . . . . . . . . . . . . . . . . . . . . . .15
metal construction kits . . . . . . . . . . . . . . . . .29 power supply . . . . . . . . . . . . . . . . . . . . . . . .26 super wheels . . . . . . . . . . . . . . . . . . . . . . . .6,8
metal shapes . . . . . . . . . . . . . . . . . . . . . . . .20 primary former . . . . . . . . . . . . . . . . . . . . . .38 sweeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
methylene solvent . . . . . . . . . . . . . . . . . . . .34 prisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 switches . . . . . . . . . . . . . . . . . . . . . . . . .12,63
mini inserts . . . . . . . . . . . . . . . . . . . . . . . . . .53 prop racer . . . . . . . . . . . . . . . . . . . . . . . . . . .6 syringes . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
mini moulder . . . . . . . . . . . . . . . . . . . . . . . .37 propellers . . . . . . . . . . . . . . . . . . . . . .7,13,25, T
mini washers . . . . . . . . . . . . . . . . . . . . . . . .8,9 pulley blocks . . . . . . . . . . . . . . . . . . . . . . . . .9 tamiya kits . . . . . . . . . . . . . . . . . . . . . . . . . .17
minute nut driver . . . . . . . . . . . . . . . . . . .46,60 pulley cord . . . . . . . . . . . . . . . . . . . . . . . . . . .9 tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
mirror sheets . . . . . . . . . . . . . . . . . . . . . .27,33 pulley kits . . . . . . . . . . . . . . . . . . . . . . . . .9,17 technology resources . . . . . . . . . . . . .41,42,43
mitre box . . . . . . . . . . . . . . . . . . . . . . . .19.21 pulleys . . . . . . . . . . . . . . . . . . . . . . . . .9,11,13 telescope . . . . . . . . . . . . . . . . . . . . . . . . . . .27
mitre boxes . . . . . . . . . . . . . . . . . . . . . . . . .30 Q thermoforming . . . . . . . . . . . . . . . . . . . .37,38
mitre cutter . . . . . . . . . . . . . . . . . .19,21,31,60 quartz movements . . . . . . . . . . . . .46,47,52.53 thermometer . . . . . . . . . . . . . . . . . . . . . . . . .27
mitre saw . . . . . . . . . . . . . . . . . . . . . . . . . . .60 R thermometer movements . . . . . . . . . . . . . . .56
mixing paddles . . . . . . . . . . . . . . . . . . . . . .61 radio controlled clocks . . . . . . . . . . . . . . .56,58 thicken cement . . . . . . . . . . . . . . . . . . . . . . .34
motor car kit . . . . . . . . . . . . . . . . . . . . . . . . .9 ramps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 three way connector . . . . . . . . . . . . . . . . . . .23
motor electric set merkur . . . . . . . . . . . . . . .29 rare-earth magnets . . . . . . . . . . . . . . . . . . .15 tide movements . . . . . . . . . . . . . . . . . . . . . .56
motor mounts . . . . . . . . . . . . . . . . . . . . . . .13 razor saw . . . . . . . . . . . . . . . . . . . . . . . . . . .19 toggle switch . . . . . . . . . . . . . . . . . . . . . . . .12
motor pulley . . . . . . . . . . . . . . . . . . . . . . . . .13 rd movements . . . . . . . . . . . . . . . . . . . . . . .46 tool boxes . . . . . . . . . . . . . . . . . . . . . . . .21,30
motors . . . . . . . . . . . . . . . . . . . . . . . . . . . .7,13 reed switch . . . . . . . . . . . . . . . . . . . . . . . . . .12 tool kits . . . . . . . . . . . . . . . . . . . . . . . . . .21,30
mould builder . . . . . . . . . . . . . . . . . . . . . . . .62 remote control kit/box . . . . . . . . . . . . . . . . .17 tool nut driver . . . . . . . . . . . . . . . . . . . . . . .60
moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 reverse movements . . . . . . . . . . . . . . . . . . .58 touch tone music mov'ts . . . . . . . . . . . . . . . .66
moulds casting . . . . . . . . . . . . . . . . . . . . . . .62 rez-n-bond solvent . . . . . . . . . . . . . . . . . . . .34 tower kits . . . . . . . . . . . . . . . . . . . . . . . . . . .18
moulds,injection & vacuum forming . . . . . . .39 right flyer . . . . . . . . . . . . . . . . . . . . . . . . . . .25 toy motors . . . . . . . . . . . . . . . . . . . . . . . . . .13
mounting clips . . . . . . . . . . . . . . . . . . . . .13,22 robot arm kit . . . . . . . . . . . . . . . . . . . . . . . .22 tracked vehicle kit . . . . . . . . . . . . . . . . . . . .17
mousetrap car kits . . . . . . . . . . . . . . . . . . .6,22 rocket launcher . . . . . . . . . . . . . . . . . . . . . . .24 trebuchet kits . . . . . . . . . . . . . . . . . . . . . . . .18
mousetraps . . . . . . . . . . . . . . . . . . . . . . . .6,42 rockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 tube cutter . . . . . . . . . . . . . . . . . . . . . . . . . .23
move it further kits . . . . . . . . . . . . . . . . . . . .22 rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 tubing . . . . . . . . . . . . . . . . . . . . . . . . . . .23,35
move it kits . . . . . . . . . . . . . . . . . . . . . . . . .10 rotational vice . . . . . . . . . . . . . . . . . . . . . . .32 turbine head & supplies . . . . . . . . . . . . . . . .28
mug pegs . . . . . . . . . . . . . . . . . . . . . . . . . . .69 rubber band planes . . . . . . . . . . . . . . . . . . .25 turn tables for music mov'ts . . . . . . . . . . . . .66
multi meter . . . . . . . . . . . . . . . . . . . . . . . . . .14 rubber bands . . . . . . . . . . . . . . . . . . . . . . . . .9 twin motor gear box . . . . . . . . . . . . . . . . . .17
multi tray heating system . . . . . . . . . . . . . . .36 rubber bumpers . . . . . . . . . . . . . . . . . . . . . .66 twine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
music movements . . . . . . . . . . . . . . . . . . . . .66 ruler metal . . . . . . . . . . . . . . . . . . . . . . . . . .21 U
mutioptics kit . . . . . . . . . . . . . . . . . . . . . . . .27 S ultra seal liquid . . . . . . . . . . . . . . . . . . . . . .61
N sabre saws . . . . . . . . . . . . . . . . . . . . . . . . . .34 ultra shine . . . . . . . . . . . . . . . . . . . . . . . . . .65
needle files . . . . . . . . . . . . . . . . . . . . . . .31,69 safety glasses/goggles . . . . . . . . . . . . . .32.34 utility knife . . . . . . . . . . . . . . . . . . . . . . . . . .31
newton push meters . . . . . . . . . . . . . . . . . . .27 safety snips . . . . . . . . . . . . . . . . . . . . . . . . .32 V
numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 sand paper . . . . . . . . . . . . . . . . . . . . . . . .3,69 vacuum forming . . . . . . . . . . . . . . . . . . . . . .38
numerals . . . . . . . . . . . . . . . . . . . . . . . . .49,57 sanding blocks . . . . . . . . . . . . . . . . . . . . . . .69 valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
nut tightening tool . . . . . . . . . . . . . . . . . . . .46 sanding sponges . . . . . . . . . . . . . . . . . . .32,69 velcro strips . . . . . . . . . . . . . . . . . . . . . . . . .32
nylon string . . . . . . . . . . . . . . . . . . . . . . . . . .6 saws . . . . . . . . . . . . . . . . . . . . . . . . . . . .21.32 visual voltmeter . . . . . . . . . . . . . . . . . . . . . .14
O scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 voltmeters . . . . . . . . . . . . . . . . . . . . . . . .14,28
offcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 scarab scissor kit . . . . . . . . . . . . . . . . . . . . . .5 W
olfa cutter . . . . . . . . . . . . . . . . . . . . . . . . . . .34 science & technology activities resource . . . .40 washers . . . . . . . . . . . . . . . . . . . . . . . . . .2,63
optics kit . . . . . . . . . . . . . . . . . . . . . . . . . . .27 scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 weather inserts . . . . . . . . . . . . . . . . . . . . . .56
o-rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 scoring knife for plastic . . . . . . . . . . . . . . . .34 weight shells . . . . . . . . . . . . . . . . . . . . . . . .57
P scrap packs wood & metal . . . . . . . . . . . . . .20 westminster chime movements . . . . . . . . . . .47
paper drill . . . . . . . . . . . . . . . . . . . . . . . . . .30 screw eyes . . . . . . . . . . . . . . . . . . . . . . . . . . .8 wheel moulds . . . . . . . . . . . . . . . . . . . . . . . .39
paper office punch . . . . . . . . . . . . . . . . . . . .32 screw eyes . . . . . . . . . . . . . . . . . . . . . . . . .2,8 wheels . . . . . . . . . . . . . . . . . . . . . . . .2,3,4,6,8
paper telescope kit . . . . . . . . . . . . . . . . . . . .27 screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . .31 wheels & levers kit . . . . . . . . . . . . . . . . . . . .16
pen & base sets . . . . . . . . . . . . . . . . . . . . . .59 second hands . . . . . . . . . . . . . . . . . . . . . . . .48 wind energy class pack . . . . . . . . . . . . . . . .28
pen blanks . . . . . . . . . . . . . . . . . . . . . . . . . .64 self-adhesive dials . . . . . . . . . . . . . . . . . . . .50 wind turbine . . . . . . . . . . . . . . . . . . . . . . . . .28
pen kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 self-adhesive pads . . . . . . . . . . . . . . . . . . . .32 wind up music movements . . . . . . . . . . . . . .66
pen making supplies . . . . . . . . . . . . . . . .64,65 shaker pegs . . . . . . . . . . . . . . . . . . . . . . . . .69 wind up plane kits . . . . . . . . . . . . . . . . . . . .25
pendulum conversion kits . . . . . . . . . . . . . . .57 shellewax . . . . . . . . . . . . . . . . . . . . . . . . . . .65 wing bows . . . . . . . . . . . . . . . . . . . . . . . . . .26
pendulum movements . . . . . . . . .46,47,55,57 side cutters . . . . . . . . . . . . . . . . . . . . . . . . . .31 wing cutter . . . . . . . . . . . . . . . . . . . . . . . . . .26
pendulums . . . . . . . . . . . . . . . . . . . . . . . . . .55 silicon rubber . . . . . . . . . . . . . . . . . . . . . . . .62 wire . . . . . . . . . . . . . . . . . . . . . . . . . . . .12,14
photo frames inserts . . . . . . . . . . . . . . . . . . .53 skeleton movement . . . . . . . . . . . . . . . . . . .58 wire stripper . . . . . . . . . . . . . . . . . . . . . . . .14
photon racer . . . . . . . . . . . . . . . . . . . . . . . . .15 skewers . . . . . . . . . . . . . . . . . . . . . . . . . .7,20 wood burning . . . . . . . . . . . . . . . . . . . . . . .69
piano hinges . . . . . . . . . . . . . . . . . . . . . . . .35 slicks . . . . . . . . . . . . . . . . . . . . . . . . . . .2,3,4,8 wood paddles . . . . . . . . . . . . . . . . . . . . . .7,20
picture frame router . . . . . . . . . . . . . . . . . . .60 slide switch . . . . . . . . . . . . . . . . . . . . . . . . .12 wood turning . . . . . . . . . . . . . . . . . . . . . . . .64
piggy bank plugs . . . . . . . . . . . . . . . . . . . . .66 slope boards . . . . . . . . . . . . . . . . . . . . . . . .25 wood turning . . . . . . . . . . . . . . . . . . . . . . . .65
pigments . . . . . . . . . . . . . . . . . . . . . . . . . . .62 sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 wooden cams . . . . . . . . . . . . . . . . . . . . . . . .16
plans,clock . . . . . . . . . . . . . . . . . . . . .44,45,54 solar car kit . . . . . . . . . . . . . . . . . . . . . . . .5,15 woodworking books . . . . . . . . . . . . .43,44,45
plastic cutter . . . . . . . . . . . . . . . . . . . . . . . . .34 solar cell . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 worm gear box kit . . . . . . . . . . . . . . . . . . . .17
plastic gears . . . . . . . . . . . . . . . . . . . . . . . . .10 solar power generator kit . . . . . . . . . . . . . .17 worm gear car kit . . . . . . . . . . . . . . . . . . . . .5
plastic heat bender . . . . . . . . . . . . . . . . . . . .36 solar propeller . . . . . . . . . . . . . . . . . . . . . . .15 worm gears . . . . . . . . . . . . . . . . . . . . . . . . .10
plastic polish . . . . . . . . . . . . . . . . . . . . . . . .34 solar propellers . . . . . . . . . . . . . . . . . . . . . .13 wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
plastic pulleys . . . . . . . . . . . . . . . . . . . . . . . . .9 solder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 wrist watch plans . . . . . . . . . . . . . . . . . . . . .58
KIDDER
KIDDER
DESIGN TECHNOLOGY & SCIENCE EDUCATION
Pen and Wood Turning Pg 64-65
Structures Pg 18-19
Showroom Hours
Monday to Friday 9:00 to 5:00
Saturday 9:00 to 1:00
(excluding June, July, August)
Hwy # 7
Plastic Fabrication Pg 34-39
407 ETR
Hwy 400
Yonge St
Bathurst St
Hwy 404
Rocketry Pg
Glen Cameron Road 24-25
Steeles Ave
Kidder Mfg.Co. Ltd.
39 Glen Cameron Road
Unit # 3
Thornhill, ON
(905)731-6944
Finch Ave
Bayview Ave
Sheppard Ave
Hwy 401 Wind Turbines Pg 28

Please note: Glen Cameron Rd is called Proctor Ave at Bayview.
Hydraulics Pg 22-23
Kidder Manufacturing Co.Ltd.

39 Glen Cameron Rd. Unit #3
Thornhill, ON
L3T 1P1
; Science Technology Dept. ; Woodworker ; Plastic Fabricator

Kidder Catalogue

Uploaded by

Copyright:

Available Formats

Kidder Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Kidder Catalogue

Uploaded by

Copyright:

Available Formats

KIDDER

Unit# 3, 39 Glen Camer on Road, Thornhill, ON, Canada, L3T 1P1

C02 Dragster Supplies A...Basswood Body Blanks

Cat# 19-5426 500/pkg . . . . . . . . . . . . . . . . . . . . . . .$130.00

D...Screw Eyes (allows 1/8” axle as well)

E...Washers (allows 1/8” axle to fit through it)

H...Straws 8” length for 1/8” axle

2 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Cat# 19-1005-KE 2-Lane . .$498.00

Students will design, build, test, and

Ohaus Scale 120A Sandpaper Start Pin Assembly

What is the F1 in Schools

A...F1 BALSA BODY BLANK

C... F1 ALUMINUM AXLES B C D

D...F1 FUSION BLACK TIRE Bulk

4 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Single Kits (Packaged) Single Kits (Packaged)

24 Student Class Pack 24 Student Class Pack

Motor Car Class Pack Solar Car Class Pack NEW

30 Student Class Pack

24 Student Class Pack

This new kit is an excellent resource to

Individual Kits 19-5444-SK..$9.75

• brass eyelets (axle bearings)

Bulk Mousetraps CD Washer/Spacer Nylon String

winner, your kids will

6 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Cat.# 80-5450-00................. $120.00

WOOD SKEWERS Cut Your Own Axles

Toll Free 1.800.263.3556 • Toll Free Fax 1.800.731.8424 • [email protected]

Thick Card Wheels Plastic Spools Super Wheels

All wheels use

Thick card disks with 3/16" hole in packs

MDF Wheels Screw Eye Axle Washers &

Cat# 19-54-1024$8.00 100/pkg

Cat# 19-20-545 $7.25 100/pkg

Cat# 19-20-546 $7.25 100/pkg A. Mini WashersFits 1/8”-3/16” dowels.

Clothes Pegs Axle Gussets

3/16” DIAMETER HOLE

Cat# 83-1256-00 ` 34mm $22.50

Cat# 83-1258-00 54mm $27.00

8 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Figure F, G, H #18 Rubber Band

Electric Car Kits Class Pack Motor Car Class Pack

Toll Free 1.800.263.3556 • Toll Free Fax 1.800.731.8424 • [email protected]

Move It & Use It Kits MIXED GEARS PACKS

Cat# 80-5466-SK . . . . . . . . . . . . . . . . . . . . . . .$15.05

10 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

The Inventa Book of The Inventa Book of

A..Inventa Starter Pack NEW

B..Gears and Pulley Pack

C..Special Mechanisms Pack

E..Link Strip Pack

F..Bearing and Adapter Pin Pack

12 #3- 39 Glen Cameron Road, Thornhill, ON, L3T 1P1 • www.kidder.ca

Electricity Kit NEW Hand Generator Kit NEW

Single Kits (Packaged)

This electricity kit includes fahnstock clips, bulbs, fahnstock

Toll Free 1.800.263.3556 • Toll Free Fax 1.800.731.8424 • [email protected]