0% found this document useful (0 votes)
45 views15 pages

HBIM Development of A Brazilian Modern Architecture Icon: Glass House by Lina Bo Bardi

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 15

See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/334429509

HBIM Development of A Brazilian Modern Architecture Icon: Glass House by


Lina Bo Bardi

Article  in  Heritage · July 2019


DOI: 10.3390/heritage2030117

CITATIONS READS

6 989

3 authors:

Ana Regina Mizrahy Cuperschmid Márcio Minto Fabricio


University of Campinas University of São Paulo
41 PUBLICATIONS   48 CITATIONS    171 PUBLICATIONS   562 CITATIONS   

SEE PROFILE SEE PROFILE

Júlio Franco
University of São Paulo
9 PUBLICATIONS   9 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Development of a support tool to co-design, integrated to the Building Information Modeling, for healthcare design. View project

Industrialização das Construções: Desenvolvimento e avaliação de produtos e processos View project

All content following this page was uploaded by Ana Regina Mizrahy Cuperschmid on 12 July 2019.

The user has requested enhancement of the downloaded file.


heritage

Article
HBIM Development of A Brazilian Modern
Architecture Icon: Glass House by Lina Bo Bardi
Ana Regina Mizrahy Cuperschmid 1, *,† , Márcio Minto Fabricio 2,† and
Júlio César Franco Jr. 2,†
1 School of Civil Engineering and Architecture, Department of Architecture and Construction, University of
Campinas (UNICAMP), Campinas, SP 13083-889, Brazil
2 Institute of Architecture and Urbanism, University of São Paulo (USP), São Carlos, SP 13566-590, Brazil
* Correspondence: cuper@unicamp.br; Tel.: +55-19-35212335
† These authors contributed equally to this work.

Received: 16 June 2019; Accepted: 10 July 2019; Published: 12 July 2019 

Abstract: Lina Bo Bardi’s Glass House (Casa de Vidro) is a National Historic Landmark designed
and built in the late 1940s in São Paulo, Brazil. The house is one of the symbols of modern Brazilian
mid-century architecture. It is a historiographical reference of the history of modern architecture
in Brazil. This article reports the experience, outcomes, challenges, benefits, and limitations of the
Heritage Building Information Modeling (HBIM) process. The HBIM was developed for Lina’s Glass
House considering the following steps: modeling planning; data acquisition; model elaboration;
recording of pathologies and damage; data management; documentation process. The HBIM
developed includes historical information and geometric data from direct measurements, laser
scanning, photographic survey, and pathologies documentation. The model allows professionals
responsible for architecture, conservation, and restoration to access integrated information on projects
and the current condition of the buildings easily and quickly. Good precision was achieved for
important building elements, contributing to maintenance and restoration actions. This experience
allowed the development of an integrated workflow of activities for collecting, processing, recording,
and managing information that may serve as a baseline for future projects for the documentation of
modernist buildings.

Keywords: Heritage Building Information Modeling; 3D modeling; Glass House; cultural heritage
documentation; mid-century architecture; modernism

1. Casa de Vidro: Glass House by Lina


Casa de Vidro (Glass House) was designed by the architect Lina Bo Bardi in the late 1940s, in an
area of 7000 sqm, in São Paulo, Brazil. The house was the object of dozens of publications in Brazil and
abroad, being one of the symbols of modern Brazilian architecture of the 1950s. It is a historiographical
reference of the history of modern architecture in Brazil.
The design is contemporary as other modernist glass houses, including the Eames house by Charles
and Ray Eames in California, the Glass House by Philip Johnson in Connecticut, and Farnsworth
House, a Mies van der Rohe design in Illinois; all designed with transparent facades integrating the
interior of the residence with the landscape [1].
Casa de Vidro was the residence of Lina Bo Bardi and her husband, Pietro Maria Bardi, from
its completion, in 1952, until their death, in the 1990s. The house was an important part of the life
trajectory of this Italian couple who arrived in Brazil in 1946, remaining in the country for the rest of
their lives [2].

Heritage 2019, 2, 1927–1940; doi:10.3390/heritage2030117 www.mdpi.com/journal/heritage


Heritage 2019, 2 1928

Lina Bo Bardi’s Casa de Vidro is recognized as Brazilian cultural heritage, being officially declared
a federal, state, and municipal heritage since 1986, after the final pronouncement by Marco Antonio
Tabet [2]. This official recognition of Casa de Vidro as cultural heritage was supported by the Bardi
couple themselves.
Inside Casa de Vidro there is a rich collection of works of art, furniture, books, and documents.
Outside of it, one can find vast gardens, a garage, a housekeeper’s house, and an architecture studio.
As the terrain shows a very steep slope, the front side of Casa de Video was built with pilotis, with
the back side resting on the ground. In contrast to the massive appearance of the back portion, the
front side is an extremely lightbox built in reinforced concrete, glazed on three sides, and supported in
seamless steel tubes. To emphasize the connection of the building with the sun and landscape, the large
windows around the living area do not have guardrail of protection. The inner courtyard traverses the
living area, providing cross-ventilation on warm days. In the middle of the living area lies an old tree,
which was there prior to the construction. It is covered with flowers and emerges from the ground to
become part of the environment [3].
This research was a partnership between the Lina Bo Bardi and Pietro Maria Bardi Institute
(ILBPMB) and the Institute of Architecture and Urban Planning (IAU) of the University of São Paulo
(USP), for the elaboration of “Casa de Vidro’s Conservation and Management Plan”, funded by the
Getty Foundation under the grant “Keeping It Modern”.
The research was developed over two years by a multidisciplinary team of about 20 professionals.
In order to carry out the research, the professionals were organized in four teams: “Historical Research”,
“Structures, Materials, and Pathology”, “Garden survey and management” and “Digital documentation
and Heritage Building Information Modeling (HBIM)”.
Casa de Vidro’s Conservation and Management Plan required the teams to survey and inventory
the main building, annex buildings, and the garden. The Heritage Building Information Modeling
(HBIM) team gathered information from the other teams to build and feed the model, in addition to
collecting on-site data.
From this perspective, one of the project’s main challenge was, from the data embedded in the
model, to extract a complete inventory of the building, with the pathologies and their treatments, using
a single model that integrates teams and their methodologies of surveys and systematizations. The aim
was to develop an inventory that could be fed continuously and used as a plan for the management of
the architectural complex called Casa de Vidro.
This article reports the experience, outcomes, challenges, benefits, and limitations of the HBIM
process applied to Lina Bo Bardi’s Casa de Vidro. It also evaluates how current HBIM’s processes
and technologies allow for the documentation of the state of conservation and how it can assist the
management of historic buildings.

2. Heritage Building Information Modeling (HBIM)


Building information modeling (BIM) stands out as project-oriented processes and technologies,
including performance simulation and lifecycle management of buildings. Used for the design
and management of new buildings, BIM also provides an opportunity for the documentation and
conservation management of historic buildings [4]. BIM can be a useful tool for gathering information
collected during the stages of survey, documentation, preservation, and analysis of historical data [4].,
and, In addition, it can be used to evidence the inconsistencies between project documents and the
existing building using coherent tridimensional models [5].
In cases when BIM is used for documenting, researching, conserving or managing assets of
heritage buildings, it is called HBIM [6,7].
Initially, HBIM was defined as a system for modeling historical structures using laser scanner
data [8]. Later, HBIM was characterized as ”a novel solution whereby interactive parametric objects
representing architectural elements are constructed from historical data, these elements (including
Heritage 2019, 2 1929

detail behind the scan surface) are accurately mapped onto a point cloud or image-based survey” [9]
(p. 89).
HBIM models allow to virtually combine consolidated information and integrate geometric and
semantic data into a single database. HBIM seeks to gather multidisciplinary information in the form
of parametric objects according to architectural treaties and rules [10]. Therefore, HBIM has great
potential to be used for building management, including operation, maintenance, and document
records [7].
HBIM makes it possible to share information among agents responsible for the preservation of
architectural heritage, reducing the dispersion of information about the building, allowing greater
efficiency in the documentation and planning of restoration actions [5,11].
HBIM models are relevant to studying, communicating, and explaining the technical and
historical value of architectural heritage [12,13]. Attesting to this, [14], they emphasize the importance
of understanding the value attributed to heritage to promote sustainable conservation in the long term.
Through HBIM it is possible to simulate and prevent risks [15], as well as to develop simulations
about the structural system and the properties of the materials [16]. Additionally, the use of HBIM can
favor the development of multiple options for intervention projects; the detection of conflicts between
the proposed interventions and the existing building; analysis of historical phases of the building; the
integration of diverse data (such as historical information, photographs, drawings, geospatial data,
remote sensing data); the integration of intangible information (such as historic values associated with
specific components or areas); interoperability (for data sharing); the possibility of integrating with
other systems such as Geographic Information System (GIS), Computer-Aided Facility Management
(CAFM) and databases [6].

3. Development of Casa de Vidro’s HBIM


In the documentation process of Casa de Vidro, HBIM was chosen to maintain a reliable record for
building management, to support future interventions, and to document the heritage asset in different
stages: as it was designed and in its current state.
Several studies have been developed focusing on heritage documentation workflow [16–20],
which were important references for the methodological planning of HBIM development for Casa de
Vidro. Casa de Vidro’s HBIM was developed considering the following steps: modeling planning; data
acquisition; model elaboration; pathologies and damage recording; data management; management
and process documentation.

3.1. Modeling Planning


The stage of planning should consider all the objectives and resources to be embraced [20]. The
information modeling must be guided by the intended use of the HBIM model. Specific models can
be elaborated for documentation, for evaluation of intervention proposals, for heritage management,
among others. Therefore, information regarding the intended purpose of HBIM use should be inserted
into the model to reflect its aim.
Within the scope of documenting Casa de Vidro, especially the current conditions of the building,
a plan was established considering material and human resources. Coordinators and work teams were
defined for the historical, landscape, and pathologies surveys, in addition to the team responsible for
the HBIM. Thus, all documentation planning was designed as multidisciplinary work with the input
of various specialists.
Considering the intended use, two distinct stages concerning historical data were idealized for
Casa de Vidro’s record within the HBIM. Generic modeling of the building was carried out in the
first stage while, in the second stage, the model was refined with more detailed geometry, insertion of
semantic information, and registering of the building phases. This process was conceived considering
that all teams worked in parallel and considering that each teams’ outcomes would be necessary to
improve the model.
Heritage 2019, 2 1930

In each stage, different forms of data acquisition were used to support the elaboration of the
model, the record of pathologies, management, and documentation.

3.2. Data Acquisition


Data acquisition involves the capture of primary data on-site and the compilation of secondary
sources of information [20]. According to [11,21], surveying existing buildings is a reverse engineering
process, as it is developed after the building is established. It requires information from the actual
building to then interpret the collected data and perform the modeling According to the authors, direct
measurement methods are often unable to record the singularities of all elements accurately. Such
methods require the direct contact of the operator with the object of study. Therefore, they are more
suitable for less complex, small buildings [7].
Corroborating the measurement methods, [7] points out that digital photogrammetric techniques,
including laser scanning, have enabled the collection of large amounts of information with greater
precision and speed.
Data collection for Casa de Vidro included graphical data from various sources such as original
architectural design documents, data regarding the changes made in the property, a topographic
survey, direct measurements, laser scanning [22], and digital photogrammetry by stereo restitution.
The buildings were characterized according to their function, use, constructive systems, and materials.
These data were incorporated in the as-is version of the residence (see Section 3.3).
The remaining design, and the parti pris adopted by Lina Bo Bardi, were used in the as-designed
version of the model. This version was enriched by historical and semantic data collected and analyzed
by the heritage architecture specialists (see Section 3.3).
Pathologies and construction materials specialists documented the building damage through
photographs and drawings. These data were represented in the damage map developed (see Section 3.4).

3.3. Model Elaboration


At this stage, the raw data collected on-site was turned into the desired end products [20]. It
involved processing, analyzing, and manipulating information to generate outputs. Focusing on the
architectural documentation of Casa de Vidro’s buildings, an HBIM model was developed to record,
preserve, and manage this heritage through an iterative process, improving information as new data
was collected. HBIM intended to document the buildings and to subsidize a plan for their maintenance,
operation, and conservation.
Several studies report the use of Autodesk Revit software for HBIM modeling [4,15,16,23,24].
Fewer studies report the use of Graphisoft ArchiCAD [25,26] and a custom modeling system focused
on specific issues of heritage modeling [27]. To develop the HBIM integrated model of Casa de Vidro’s
set of buildings, Autodesk’s software Revit and Navisworks were chosen. This choice was based,
firstly, on the greater familiarity of the team involved in the modeling work with this tool, and secondly
on the Brazilian architecture market, in which Autodesk is prominent.
During the first stage of modeling, data were collected using direct techniques (measuring
tape) and was combined with pre-existing data, such as buildings records, documents regarding
interventions, and a topography survey performed in the 1990s. The output of this first stage was a
generic model of the architectural heritage.
In the second stage of modeling, indirect surveying techniques were used, including photographic
and laser scanning. The photographic survey was processed into orthoimages. Laser scanning of
the buildings was carried out [22]. From the obtained point cloud, views (plans, sections, etc.) were
extracted to be used in the modeling, which, together with the orthoimages, allowed the development
of a model with accurate geometry.
Figure 1 shows the location of the set of buildings extracted from the point cloud, with a 1 × 1
meter geometric grid to facilitate incorporation into the HBIM model.
Heritage 2019, 2 1931

Heritage 2019, 2 FOR PEER REVIEW 5

Heritage 2019, 2 FOR PEER REVIEW 5

Figure 1. Aerial view of Casa de Vidro extracted from the point cloud (black: gardens with hidden
Figure 1. Aerial
canopies; view
other of Casa
colors: de Vidro
buildings extracted
and drives, from
colored the point
according cloud (black:
to altimetric gardens with hidden
dimensions).
canopies; other colors: buildings and drives, colored according to altimetric dimensions).
Figure 1. Aerial
In a first view of
approach, Casa generated
views de Vidro extracted
from thefrom the cloud
point point cloud
were(black:
linkedgardens
to the with
HBIM hidden
model to
canopies;
collate other the
along with colors: buildings
model’s and drives,
geometry, colored
which according
evidenced to altimetric
deviations. Thedimensions).
imprecise elements were
In a first approach, views generated from the point cloud were linked to the HBIM model to
remodeled whenever necessary. During this process, the actual position of the columns, the curvature
collate along
In a with the model’s
first approach, geometry,
views generated which
from evidenced deviations.
the point cloud were linkedThetoimprecise
the HBIMelements
model towere
of the roofing slab, the dimensions of the floor slab, the glass facade glazing pockets, the access stair
collate whenever
remodeled along with necessary.
the model’sDuring
geometry, which
this evidenced
process, the deviations.
actual positionTheofimprecise
the elements
columns, the were
curvature
railing, the fireplace chimney, and other deviations were identified and adjusted. Deformations in
remodeled
of thethe
roofing whenever necessary. During this process, the actual position of the columns, the curvature
structure of the main staircase were also included in the model. Figure 2 and 3 illustrate the stair
slab, the dimensions of the floor slab, the glass facade glazing pockets, the access
of the
railing, the roofing
fireplaceslab,chimney,
the dimensions of thedeviations
and model
other floor slab, the
wereglass facade glazing
identified pockets, the
and adjusted. access stair in
Deformations
overlapping sections of the Revit and point cloud.
railing, the fireplace chimney, and other deviations were identified and adjusted. Deformations in
the structure of the main staircase were also included in the model. Figures 2 and 3 illustrate the
the structure of the main staircase were also included in the model. Figure 2 and 3 illustrate the
overlapping sections of the Revit model and point cloud.
overlapping sections of the Revit model and point cloud.

Figure 2. Longitudinal section of the Heritage Building Information Model (HBIM) overlapping with
the point cloud image (in black: wire structure of the BIM model - other colors: representations from
the point cloud).
Figure 2. Longitudinal section of the Heritage Building Information Model (HBIM) overlapping with
Figure Longitudinal
the2.point section
cloud image of the
(in black: Heritage
wire structureBuilding Information
of the BIM Model
model - other (HBIM)
colors: overlapping
representations from with
the point cloud image
the point cloud). (in black: wire structure of the BIM model - other colors: representations from
the point cloud).
Heritage 2019, 2 1932

Heritage 2019, 2 FOR PEER REVIEW 6

Heritage 2019, 2 FOR PEER REVIEW 6

Figure 3. Cross section of the HBIM model overlapping with the point cloud image (in black: wire
Figure 3. Cross
structure section
of the HBIMofmodel;
the HBIMother model overlapping
colors: point cloud). with the point cloud image (in black: wire
structure of the HBIM model; other colors: point cloud).
Figure 3. Cross
In a second section ofthe
approach, the segmented
HBIM modelpoint overlapping withlinked
cloud was the point cloud image
to Revit (in black:
software, wire
serving as the
basis structure
for of the HBIM
modeling the model; other
building colors: point
elements. cloud).
Shortly, two approaches were used for integrating theas the
In a second approach, the segmented point cloud was linked to Revit software, serving
model into the point cloud. The first one was based on, the generation of orthoimages that were
basis for modeling
In afor
second the buildingthe
approach, elements. Shortly, two approaches were used for integrating thethe
model
utilized adjustments; and thesegmented
second, a morepoint direct
cloud was based
one, linkedon to importing
Revit software, serving
the point cloud as into
into the point
basis cloud.
for modeling The first one was based on, the generation of orthoimages that were utilized for
the Revit software tothe building
serve elements.
as a baseline forShortly, two approaches
3D modeling. were used
The latter proved to befor integrating
more efficient.the
In
adjustments;
model
this case, and
into
thethethe second,
point
segmented cloud. aThe
point more direct
first
cloud inone one,
was
Leica basedon,
based
Cyclone onthe
importing
software generation the
was emulated of point cloud
orthoimages
in Revit into the
that were
through theRevit
software
Leica Cloudworx plugin, enabling the modeling to be performed directly on the scanned point cloud. the
to
utilized serve
for as a baseline
adjustments; andfor 3D
the modeling.
second, a moreThe latter
direct proved
one, based to
on be more
importing efficient.
the pointIn this
cloud case,
into
the
segmented Revit
In Figure software
point cloud
4, we toinserve
illustrate theasprocess
Leica a baseline
Cyclone forBo3D
software
using modeling.
was emulated
Bardi’s The latter
architecture proved
instudio.
Revit to be more
through efficient.
the Leica In
Cloudworx
this case, the segmented point cloud in Leica Cyclone software was emulated
plugin, enabling the modeling to be performed directly on the scanned point cloud. In Figure 4, we in Revit through the
Leicathe
illustrate Cloudworx
process plugin,
using Bo enabling
Bardi’s thearchitecture
modeling to studio.
be performed directly on the scanned point cloud.
In Figure 4, we illustrate the process using Bo Bardi’s architecture studio.

Figure 4. Point cloud imported to Revit used to model Bo Bardi’s architecture studio.

During the development of the HBIM model, information from the “Historical Research” and
“Structures,Figure 4. Point
Materials, andcloud imported to
Pathology” Revit were
teams used to model Bo Bardi’s
incorporated. Thearchitecture
“Historicalstudio.
Research” team
Figure 4. Point cloud imported to Revit used to model Bo Bardi’s architecture studio.
identified different eras moments for the Casa de Vidro’s modeling. Initially, it was considered that
During the development of the HBIM model, information from the “Historical Research” and
During the Materials,
“Structures, developmentand Pathology”
of the HBIM teams wereinformation
model, incorporated.from
The the
“Historical Research”
“Historical team and
Research”
identified different eras moments for the Casa de Vidro’s modeling. Initially,
“Structures, Materials, and Pathology” teams were incorporated. The “Historical Research” it was considered thatteam
identified different eras moments for the Casa de Vidro’s modeling. Initially, it was considered that the
Heritage 2019, 2 1933

modeling of the house could be done in three different ways: (i) according to the original design; (ii) as
Heritage 2019, its
built (depicting 2 FOR PEER REVIEW (iii) and the current state of the building.
inauguration); 7

Based on the availability of information and records, we concluded that construction


the modeling of the house could be done in three different ways: (i) according to the original design;
documentation
(ii) as builtwas quite limited,
(depicting preventing
its inauguration); (iii) the
and “as-built”
the currentmodeling. Even the design documentation
state of the building.
presented Based
substantial gaps, such as the disappearance of
on the availability of information and records, we concludedthe structural detailing board, among
that construction
others.documentation
Therefore, a mixed modellimited,
was quite was chosen, that use
preventing the the information
“as-built” remaining
modeling. Even from
the the projects,
design
documentation
complemented withpresented substantial
the building’s gaps,We
records. such as the to
decided disappearance
model two phasesof the structural
of Casa dedetailing
Vidro’s life
cycle, board, among and
as designed others.
as Therefore,
built, herea mixed
calledmodel was chosen, that
the as-designed use and
phase, the information
the currentremaining
buildingfrom(in 2017),
the projects, complemented with the building’s records. We decided to model two phases of Casa de
called the as-is phase.
Vidro’s life cycle, as designed and as built, here called the as-designed phase, and the current building
The as-designed model was developed from sketches by Lina Bo Bardi, technical drawings of
(in 2017), called the as-is phase.
building designs, recordsmodel
The as-designed in thewas
architect’s
developed workbook,
from sketches invoices
by LinaofBobuilding materials,
Bardi, technical photographs
drawings of
of the building
construction
designs, records in the architect’s workbook, invoices of building materials, photographs of and
and the newly constructed building, as well as articles from architectural
construction magazines
the construction andofthe
thenewly
time.constructed
For example, by analyzing
building, as well as the notes
articles on architectural
from the construction
and and
construction
maintenance of the magazines
residence, of the
the time.
teamFor example,that,
identified by analyzing the1950s,
in the late notes onduethetoconstruction and of the
the instability
water maintenance
supply system, of thearesidence,
water tank the was
team placed
identified that,the
over in the late 1950s,
building. dueinformation
This to the instability of thein the
appears
HBIM,water
Figuresupply
5. system, a water tank was placed over the building. This information appears in the
HBIM, Figure 5.

Figure 5. Building phases: as-designed and as-is.


Figure 5. Building phases: as-designed and as-is.
There are also documents on structural design alternatives developed in Italy by Pier Luigi
Nervi’s office. These variations were not registered in the HBIM model. Perhaps, future research may
There are also documents on structural design alternatives developed in Italy by Pier Luigi
incorporate such design alternative into the model the solutions studied.
Nervi’s office. These variations were not registered in the HBIM model. Perhaps, future research may
The second phase of the modeled life cycle (as-is phase) depicted the current buildings (Casa de
incorporate such
Vidro, Studio, design alternative
Housekeeper House,intoandthe modelaccording
Garage), the solutions studied.
to surveys carried out throughout 2017.
The second
It reflects thephase of the modeled
interventions made overlife thecycle
years,(as-is phase) depicted
deformations the current
and constructive buildings (Casa de
pathologies.
Vidro, Studio, Housekeeper
It should House,
be noted that, and
for the Garage),
buildings in according
the complextoother
surveys
than carried
the mainout throughout
house 2017. It
(i.e., Studio,
Housekeeper House, and Garage), the models were not differentiated
reflects the interventions made over the years, deformations and constructive pathologies. into two phases. They
Itcontemplate
should beonly the current
noted situation
that, for of the buildings.
the buildings in the complex other than the main house (i.e.,
The modeling of the as-is phase was performed based on laser scanning and the generated point
Studio, Housekeeper House, and Garage), the models were not differentiated into two phases. They
cloud, as well as on photogrammetry and orthomosaic data.
contemplate only the current situation of the buildings.
The Structures, Materials, and Pathology team provided data on the simulation of the structural
The
model, which of
modeling theinserted
were as-is phase
as a was performed
federated model based
of Casaondelaser scanning
Vidro. and theperformance
The structural generated point
cloud,analysis
as well was
as ondeveloped
photogrammetry and orthomosaic data.
by a specialized consultant, using the TQS tool, a Brazilian structural
The Structures,
software. Materials,
Electric and Pathology
and hydraulic team not
systems were provided dataFor
modeled. on the
the simulation of the structural
structural performance
model,simulations,
which were testsinserted
were performed to analyzemodel
as a federated the strength of thede
of Casa concrete
Vidro.floor slab
The and for qualitative
structural performance
and quantitative measurement of the internal reinforcement in the pillars. These analyses
analysis was developed by a specialized consultant, using the TQS tool, a Brazilian structural software. included
assays and calculations.
Electric and hydraulic systems were not modeled. For the structural performance simulations,
To verify clashes between the structural and architectural models, both were integrated using
tests were performed to analyze the strength of the concrete floor slab and for qualitative and
the Autodesk Navisworks tool. Compatibilization analysis pointed out modeling conflicts.
quantitative measurement of the internal reinforcement in the pillars. These analyses included assays
and calculations.
Heritage 2019, 2 FOR PEER REVIEW 8

Regarding the semantic information added to the model, the historical surveys allowed the
tracking of the concrete mixture used in the structures, despite not specifying the type of cement used
(information not recovered). Based on data from the Structures, Materials, and Pathology team and
the technical report, it was possible to add to the model information on the floor slab strength, which
Heritage 2019, 2 1934
was around 30 MPa. That team also provided information on the damage map, which was added to
the model and is presented below.

To 3.4.
verify clashesand
Pathologies between
Damagesthe structural and architectural models, both were integrated using the
Documentation
Autodesk Navisworks tool. Compatibilization analysis pointed out modeling conflicts.
The pathological manifestations observed by the “Structures, Materials, and Pathology” team
Regarding the semantic information added to the model, the historical surveys allowed the
were initially documented through AutoCAD drawings, spreadsheets, and photographs.
trackingSubsequently,
of the concrete mixture
such used was
information in the structures,
inserted despite
into the BIM not specifying
models the type
to generate of cement used
an integrated
(information not recovered). Based on data from the Structures, Materials, and
documentation along with the other modeled information (graphical and semantic). Pathology team and the
This documentation was based on the elaboration of damage maps in specific
technical report, it was possible to add to the model information on the floor slab strength,views of the HBIM
which was
models, adopting parametric elements hatched and modeled according to the
around 30 MPa. That team also provided information on the damage map, which was added to thetype of pathology,
being able to represent the form and the type of the pathological manifestation observed, Figure 6.
model and is presented below.
For that, two-dimensional detail elements (filled regions and polylines) were used in specific
views of the HBIM model aiming to record and detail pathologies. This tool allowed the drawing of
3.4. Pathologies and Damages Documentation
forms, approximating the model to the actual state of the building. Additionally, different hatches
Thewere used to visually
pathological distinguish the
manifestations manifestations
observed by thefrom the other components
“Structures, Materials, of the
andbuilding.
Pathology” team
The modeled pathologies received customized parameters to accommodate additional
were initially documented through AutoCAD drawings, spreadsheets, and photographs. Subsequently,
information to the model, aiming to collate information raised by the “Structures, Materials, and
such information was inserted into the BIM models to generate an integrated documentation along
Pathology” team and to assist the maintenance management of the heritage assets. Various
with theinformation
other modeled information
regarding (graphical
the pathologies, such asand
area,semantic).
treatment technique, photographic record, cost
This documentation
survey, was basedand
specific observations, onidentifiers
the elaboration
could beof collected
damage and maps in specific
stored. views
This data of the
could be HBIM
models,visualized
adopting as automatic elements
parametric captions in charts, and
hatched detailmodeled
views, tables, and reports.
according Different
to the type ways of being
of pathology,
inserting information
able to represent the form and concerning
the typepathological manifestations
of the pathological into the model
manifestation are under
observed, study
Figure 6.
including the creation of parametric families of pathologies.

(a)

Heritage 2019, 2 FOR PEER REVIEW 9


(b)

(c)
Figure 6. Views of Casa de Vidro’s HBIM model illustrating the use of hatches for documenting
6. Viewsmanifestations
Figurepathological of Casa de Vidro’s HBIM
(a) and (b) model
side views; illustrating
(c) back the use
view. Source: ofMartins.
Welen hatches for documenting
pathological manifestations (a) and (b) side views; (c) back view. Source: Welen Martins.
3.5. Data Management
After processing the data, outputs must be indexed, stored, published, and distributed to ensure
that they can be reused in the future [20]. In this sense, the HBIM model creates a record of historical
research, as it encompasses both geometric data and metadata, improving data management.
The production and management of structured digital information are accomplished by a
collaborative process that involves planning, managing the element with historical value, preventive
Heritage 2019, 2 1935

For that, two-dimensional detail elements (filled regions and polylines) were used in specific
views of the HBIM model aiming to record and detail pathologies. This tool allowed the drawing of
forms, approximating the model to the actual state of the building. Additionally, different hatches
were used to visually distinguish the manifestations from the other components of the building.
The modeled pathologies received customized parameters to accommodate additional information
to the model, aiming to collate information raised by the “Structures, Materials, and Pathology” team
and to assist the maintenance management of the heritage assets. Various information regarding the
pathologies, such as area, treatment technique, photographic record, cost survey, specific observations,
and identifiers could be collected and stored. This data could be visualized as automatic captions
in charts, detail views, tables, and reports. Different ways of inserting information concerning
pathological manifestations into the model are under study including the creation of parametric
families of pathologies.

3.5. Data Management


After processing the data, outputs must be indexed, stored, published, and distributed to ensure
that they can be reused in the future [20]. In this sense, the HBIM model creates a record of historical
research, as it encompasses both geometric data and metadata, improving data management.
The production and management of structured digital information are accomplished by a
collaborative process that involves planning, managing the element with historical value, preventive
maintenance, documentation, and research [6]. In the documentation of buildings of historical interest,
the quality of the information is fundamental for the intended results. Low-quality, inaccurate,
incomplete, or uncoordinated information leads to errors that may undermine the value and meaning
of the heritage resource [6]. This documentation is composed of a multidisciplinary knowledge base,
which, according to [28], is essential for the information integration between material and immaterial
heritage. In this sense, the documentation of comprehensive and incremental knowledge of the built
heritage represents a key activity for the development of HBIM.
The management of cultural heritage information should consider that several experts have
contributed to data collection, the interpretation of information, and its processing in the form of an
HBIM model. Understanding information within the model is critical to making decisions on future
interventions, conservation, and management [6].
To develop the HBIM model of Casa de Vidro, the participation of a multidisciplinary team was
critical for giving significance to the model elements and for the discussion of hierarchies of priorities
and relevance to defining the precision and level of detail of each component. Also, this team provided
historical, design, and material specifications to be incorporated into the BIM model.
To favor the collaboration among the teams, several interdisciplinary workshops were developed
at Casa de Vidro’s site. In addition, status update meetings for the presentation of preliminary
results and integration between the teams were carried out within the research group “Arquibrás” at
the IAU-USP.
To support the communication between teams and data storage, we adopted Google Drive cloud,
with different permissions to each participant. Due to Google Drive limitations, the 150Gb point cloud
file could not be stored in the cloud. It was stored on two computers at ILBPMB and IAU-USP. A
backup copy was stored on an external hard drive.
For model development, Revit, Navisworks and Autocad tools were used in the 2017 version, and
after converted, to be completed and delivered in the 2018 version. The incorporation of the point
cloud in Revit made use of the Leica CloudWorx plugin. For structural simulation, TQS software
was used. The consolidated model constitutes an essential collection of documents with accurate and
up-to-date information on the set of buildings of ILBPMB head office and serves as a baseline for
restoration and conversion projects and recording maintenance actions. Figure 7 shows the federated
model containing the terrain, the Casa de Vidro building, Studio, Housekeeper House, and the Garage.
Heritage 2019, 2 1936

Heritage 2019, 2 FOR PEER REVIEW 10

Heritage 2019, 2 FOR PEER REVIEW 10

Figure 7. Federated model showing all buildings that make up the Lina Bo Bardi and Pietro Maria
Figure 7. Federated model showing allBardi
buildings that
Institute make up the Lina Bo Bardi and Pietro Maria
(ILBPMB).
Bardi Institute (ILBPMB).
Figure 7. Federated model showing all buildings that make up the Lina Bo Bardi and Pietro Maria
3.6. Processes Documentation and Management
Bardi Institute (ILBPMB).
3.6. Processes Documentation
The management andand Managementof the processes aimed at analyzing various aspects of the
documentation
3.6. Processes
documentation
The managementDocumentation
project
anditself, and
theManagement
procedures
documentation of and resources used,
the processes aimedand
atthe quality ofvarious
analyzing the product [20].of the
aspects
The experience of digital documentation and HBIM model development motivated the outline of an
documentation project itself,
The management and the proceduresofand
documentation resourcesaimed
the processes used,atand the quality
analyzing variousofaspects
the product
of the [20].
integrated flowchart of activities for collecting, processing, recording, and managing information that
documentation project itself, the procedures and resources used, and the quality
The experience of digital documentation and HBIM model development motivated the outline of the product [20]. of
may be a baseline for future projects for documenting modernists buildings. Figure 8 presents a
The experience
an integrated of digital documentation and HBIM model development motivated the outline
flowchart of activities for collecting, processing, recording, and managing information of an
workflow of the complete documentation process.
integrated flowchart of activities for collecting, processing, recording, and managing information
that may be a baseline for future projects for documenting modernists buildings. Figure 8 presents a that
may be a baseline for future projects for documenting modernists buildings. Figure 8 presents a
workflow of the complete documentation process.
workflow of the complete documentation process.

Figure 8. Casa de Vidro’s HBIM workflow.

Figure 8. Casa de Vidro’s HBIM workflow.


Figure 8. Casa de Vidro’s HBIM workflow.
Heritage 2019, 2 1937

In historical heritage buildings, it is necessary to consider different sources of information,


including the original design, information derived from authentic documents and reports (letters,
informal records, list of purchased materials, etc.), estimates with an acceptable degree of confidence,
and information obtained by small-scale destructive assays applied to the materials and components
of the building. It is necessary to consider the reliability of each of these sources at every stage of
modeling as well as the costs, hazards, and benefits of each source.
The developed Casa de Vidro model is not an entirely accurate inventory since the lack of
information and limitations of the modeling tools decrease the accuracy of the outputs. Yet, the
developed HBIM model is a relevant record, and potentially the most accurate digital model of Lina
Bo’s Casa de Vidro ever made, including accurate geometric information, structural simulations,
damage map recording, and current constructive pathologies, in addition to historical information.
For the building manager, it is essential to communicate the reliability level of the digital model
and its elements. Noteworthy, for the HBIM development, some information relied on estimates
elaborated by experts and/or were based on incomplete information from the original design and the
building records. Thus, is the HBIM model includes information from different categories, with varying
levels of accuracy. Focusing on the preservation and conservation of the building, new attributes could
be continuously added to the modeled components, such as the dates of replacement/insertion of new
materials and components in the building, technical details of the materials, and others. A release
version of the HBIM model is available online for students and architecture professionals (Glass House
model on Autodesk A360: https://arquitec.iau.usp.br/projetos/casa-de-vidro-projeto-getty).

4. Final Considerations
The use of HBIM for purposes of documentation of Brazilian modernist architectural heritage is
still very restricted. In this article, we present the procedures adopted to develop an HBIM of Casa de
Vidro, emphasizing the documentation of the building’s current state of conservation and subsidizing
the planning of preservation, maintenance, and publicizing actions.
Comparing the BIM model with the point cloud generated by 3D scanning made it possible to
adjust the model to obtain better geometric consistency. One of the greatest benefits of the point
cloud generated through laser scanning was its high accuracy that allowed us to build a model with
precise geometry.
The model presents variable precision related to the technical-constructive detailing. For the
elements whose materials were well documented or were surveyed during the specialist’s inspections,
the model was parameterized to reflect these details. Some items, depending on their importance for
the construction and the availability of information, were detailed accordingly.
In Casa de Vidro’s architectural model, elements and constructive components were represented
as accurately as possible. However, this effort faced some difficulties related to the lack of accurate
information in some cases, the absence of appropriated models of components, the limits of the
modeling solutions used to incorporate wearing, deformation and so on. Likewise, [4] pointed out
some challenges faced during the elaboration of the model, given the absence of families of components
and [16,23] adverted that the level of development (LOD) of the elements of the HBIM modeling was
not homogeneous.
Revit, proved to be suitable for the documentation of modernist architecture, as it contains features
that support the virtual reconstruction of most elements. However, as a tool originally developed for
designing new buildings, it faces challenges when recording imperfections and deformations. It is still
considered of potential use for recording other modernist buildings of historical interest.
The HBIM developed for Casa de Vidro allows architecture, conservation, and restoration
professionals to easily and quickly access integrated information on projects and the current conditions
of the buildings, with good precision for the most important elements, contributing to the planning of
maintenance and restoration actions.
Heritage 2019, 2 1938

The conservation of a building of historical interest is based on decisions [29], and it is essential to
mention that this parametric database must be updated with every intervention, change or discovery
in order to maintain a precise and dynamic register of the buildings of the Casa de Vidro’s complex.
As technology advances or discoveries concerning the original project emerge, it is convenient to
adjust the model to enhance its fidelity to the actual built state, according to the life-cycle phases.
In short, protection, conservation, restoration, monitoring, management, and recording of cultural
objects and physical preservation can be supported by documentation in HBIM.
In addition to the model itself, another contribution of this work is the report of the HBIM
implementation process. As pointed out by [30], documentation is needed for conservation, but also for
public awareness. To that end, the authors add that it is convenient to have an interactive multimedia
environment that allows dialogue between specialists and non-specialists.
In this sense, the use of interactive multimedia systems can foster interest in historic buildings,
supporting diffusion and awareness of cultural assets. In the future, it is possible to transpose
the information contained in the model to more appropriate systems for interaction with lay users,
promoting actions to disseminate the consolidated knowledge that the HBIM provides.

Author Contributions: Conceptualization, A.R.M.C. and M.M.F.; methodology, A.R.M.C. and M.M.F.;
investigation, A.R.M.C. and, M.M.F and J.C.F.J.; resources, A.R.M.C.; writing—original draft preparation,
A.R.M.C. and J.C.F.J.; writing—review and editing, A.R.M.C., M.M.F. and J.C.F.J.; supervision, M.M.F.; project
administration, M.M.F.
Funding: This research was funded by the Getty Foundation under the grant “Keeping It Modern” 2016-July.
Acknowledgments: The authors thank: Renato S. Anelli, a researcher in the fields of theory and history of
architecture and general coordinator of Casa de Vidros’s conservation and restoration project, who collaborated
providing historical information and assigning significance to the architectural elements of the building. Ana
Lúcia Cerávolo, a specialist in architectural heritage and assistant coordinator to the conservation project, and
Aline Sanches Corato, who works in the field of history of architecture and is an expert on Lina Bo Bardi, who
were also part of the team. In the areas of structures and construction technology, Adriano Rossignolo coordinated
the team with the collaboration of Osny Pelegrino, both experts’ engineers at construction materials. The engineer
and doctor Bruno de Santis and engineer Alexandre Rosin Pereira, who worked on the survey of pathologies in
the buildings that make up the ILBPMB, as well as the Eng. Ricardo Couceiro Bento, consultant, who developed
the analyses and simulations of the Casa de Vidro’s structural system performance. These colleagues provided
information on building materials, structural solutions, a map of damage, and pathologies recorded in the
HBIM model. In the area of landscaping, Luciana Schenck coordinated the team that included Lígia Paludetto.
These colleagues carried out the accurate cataloging of the gardens integrating the ensemble and carried out
a management plan for the species present in the garden. The team from the University of Ferrara, Diaprem,
responsible for laser scanning (Scaner Leica) and who provided training on cloud point manipulation for the
authors. Architect Welen Martins, responsible for inputting information regarding pathologies in Casa de Vidro’s
model. Camila Manoel Crnkovic, who revised the English language. CNPq for the research productivity grant,
process 306998/2018-1.
Conflicts of Interest: The authors declare no conflict of interest.

References
1. Anelli, R.; Camacho, S. Casas de Vidro; Romano Guerra: São Paulo, Brazil, 2018.
2. Cuperschmid, A.R.M.; Cerávolo, A.L.; Grachet, M.G.; Franco Júnior, J.C.; Fabricio, M.M. Casa de Vidro: BIM
e Gestão do Patrimônio Histórico Arquitetônico. Cad. PROARQ 2018, 30, 177–198.
3. Mindlin, H. Arquitetura Moderna no Brasil; Aeroplano/IPHAN: Rio de Janeiro, Brazil, 2000.
4. From Survey to HBIM for Documentation, Dissemination and Management of Built Heritage: The Case
Study of St. Maria in Scaria d’Intelvi. In Proceedings of the 2013 Digital Heritage International Congress
(DigitalHeritage), Marseille, France, 28 October–1 November 2013.
5. Del Giudice, M.; Osello, A. BIM for Cultural Heritage. In Proceedings of the International Archives of the
Photogrammetry, Remote Sensing and Spatial Information Sciences—ISPRS Archives, Strasbourg, France,
2–6 September 2013; Volume XL-5/W2, pp. 225–229.
6. Historic England. BIM for Heritage: Developing a Historic Building Information Model; Historic England:
Swindon, UK, 2017.
Heritage 2019, 2 1939

7. Groetelaars, N.J. Criação de Modelos BIM a partir de “Nuvens de Pontos”: Estudo de Métodos e Técnicas
Para Documentação Arquitetônica. Doctoral Thesis, Universidade Federal da Bahia, Salvador, Brazil, 7 April
2015; p. 372.
8. McGovern, E.; Murphy, M.; Pavia, S. Historic building information modelling (HBIM). Struct. Surv. 2009, 27,
311–327.
9. Murphy, M.; McGovern, E.; Pavia, S. Historic Building Information Modelling—Adding intelligence to laser
and image based surveys of European classical architecture. ISPRS J. Photogramm. Remote Sens. 2013, 76,
89–102. [CrossRef]
10. Brusaporci, S.; Maiezza, P.; Tata, A. A framework for architectural heritage hbim Semantization and
development. ISPRS-Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2018, 42, 179–184. [CrossRef]
11. García-Valldecabres, J.; Pellicer, E.; Jordan-Palomar, I. BIM Scientific Literature Review for Existing Buildings
and a Theoretical Method: Proposal for Heritage Data Management Using HBIM. Constr. Res. Congr. 2016,
2016, 2228–2238.
12. Wu, T.C.; Lin, Y.C.; Hsu, M.F.; Zheng, N.W.; Chen, W.L. Improving traditional building repair construction
quality using historic building information modeling concept. ISPRS-Int. Arch. Photogramm. Remote Sens.
Spat. Inf. Sci. 2013, 40, 691–694. [CrossRef]
13. Mansir, D.; Muhammad, J.A.; Kasim, N. Reviewing the Need for HBIM in the conservation of Heritage
Building. Soc. Sci. 2016, 11, 2777–2782.
14. Arayici, Y.; Mahdjoubi, L.; Counsell, J.; Nagy, G.; Hawas, S.; Dweidar, K. (Eds.) Heritage Building Information
Modelling, 1st ed.; Routledge: London, UK, 2017; ISBN 9781315628011.
15. Di, Y.; Wu, C. Research on the BIM of the Stone Building for Heritages Conservation. In Proceedings of the
2011 3rd International Conference on Education Technology and Computer (ICETC 2011), Lushan, China,
5–16 July 2011; pp. 1488–1491.
16. Pauwels, P.; Bod, R.; Di Mascio, D.; De Meyer, R. Integrating building information modelling and semantic
web technologies for the management of built heritage information. Digit. Herit. Int. Congress (DigitalHeritage)
2013, 1, 481–488.
17. Moreira, A.; Quattrini, R.; Maggiolo, G.; Mammoli, R. Hbim methodology as a bridge between Italy and
argentina. ISPRS-Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2018, 42, 715–722. [CrossRef]
18. Quattrini, R.; Pierdicca, R.; Morbidoni, C. Knowledge-based data enrichment for HBIM: Exploring
high-quality models using the semantic-web. J. Cult. Herit. 2017, 28, 129–139. [CrossRef]
19. Jordan-Palomar, I.; Tzortzopoulos, P.; García-Valldecabres, J.; Pellicer, E. Protocol to Manage Heritage-Building
Interventions Using Heritage Building Information Modelling (HBIM). Sustainability 2018, 10, 908. [CrossRef]
20. Amorim, A. Methodological Aspects of Architectural Documentation. Geoinform. FCE CTU 2011, 6, 34–39.
[CrossRef]
21. Dezen-Kempter, E.; Soibelman, L.; Chen, M.; Filho, A.V.M. escaneamento 3D a laser, fotogrametria e
modelagem da informação da construção para gestão e operação de edificações históricas. Gestão Tecnol.
Proj. 2015, 10, 113. [CrossRef]
22. Balzani, M.; Maietti, F.; Rossato, L. 3D data processing toward maintenance and conservation. The integrated
digital documentation of casa de vidro. ISPRS-Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2019, 42,
65–72. [CrossRef]
23. Biagini, C.; Capone, P.; Donato, V.; Facchini, N. Towards the BIM implementation for historical building
restoration sites. Autom. Constr. 2015, 71, 74–86. [CrossRef]
24. Tolentino, M.M.A. A Utilização do HBIM na Documentação, na Gestão e na Preservação do Patrimônio
Arquitetônico. In Proceedings of the XX Congreso de la Sociedad Iberoamericana de Gráfica Digital, Iberoam,
Buenos Aires, Argentina, 9–11 November 2016; pp. 510–518.
25. Canuto, C.L. Modelo BIM e Proposta de Intervenção do Palácio Gustavo Capanema, Rio de Janeiro, RJ: Pela
Preservação Digital da Arquitetura Moderna. Master’s Dissertation, Universidade Federal do Rio de Janeiro,
Rio de Janeiro, Brazil, 2017.
26. Paiva, R.; Diógenes, B.C. Futuro do Pretérito: BIM e Documentação Digital da Arquitetura Moderna em
Fortaleza. In Proceedings of the Encontro Brasileiro de Tecnologia de Informação e Comunicação na
construção, Porto Alegre, Brazil, 4–6 November 2015; Volume 7.
Heritage 2019, 2 1940

27. Fassi, F.; Fregonese, L.; Adami, A.; Rechichi, F. Bim system for the conservation and preservation of the
mosaics of san marco in venice. ISPRS-Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2017, XLII-2/W5,
229–236. [CrossRef]
28. Canuto, C.L.; Moura, L.R.; Salgado, M.S. Tecnologias digitais e preservação do patrimônio arquitetônico:
Explorando alternativas. PARC Pesqui Arquitetura Construção 2016, 7, 252–264. [CrossRef]
29. Eppich, R.; Chabbi, A. Recording, Documentation, and Information Management for the Conservation of Heritage
Places: Illustrated Examples; Donhead: Shaftesbury, UK, 2007; Volume 2, ISBN 978-0-89236-946.
30. Haddad, N.A.; Akasheh, T.S.; Lerma, J.L.; Khresat, B.R. Towards a Risk Management and Conservation Plan
for the Djin Blocks at the World Heritage Site of Petra, Jordan: The Case of Djin Block No. 9. Conserv. Manag.
Archaeol. Sites 2015, 17, 175–191. [CrossRef]

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access
article distributed under the terms and conditions of the Creative Commons Attribution
(CC BY) license (http://creativecommons.org/licenses/by/4.0/).

View publication stats

You might also like