ra

ie
iv
R
Contents Page No.

LABORATORY GLASSWARE, SILICA WARE, QUARTZ WARE & MICRO SLIDES

• Laboratory Glassware 11 - 91
DURAN, STERIPLAN, DUROPLAN & AR-GLAS manufactured by Schott Glas, Germany
EM-TECHCOLOR manufactured by Hirschmann Laborgerate, Germany
RIVIERA Brand Labware
Fabricated products made in India from DURAN and EM-TECHCOLOR products
DURAN Connection Systems
DURAN Bottles / Super Duty Glassware
• Silica Ware, RIVIERA 92 - 94
• Quartz Ware, RIVIERA 95 - 97
• Products for Microbiology 98 - 100
STERISTOPPERS manufactured by Heinz Herenz, Germany
• Microscope Slides, RIVIERA 101

BALANCES, INSTRUMENTS & EQUIPMENTS

• Instruments manufactured by S. I. Analytics GmbH, Germany 102
• Water Distillation Units, RIVIERA 103 - 108
• Filtration Units, RIVIERA 108 - 109
• Membrane Filters, RIVIERA 110 - 112
• EM-TECHCOLOR Liquid Handling Products,
manufactured by Hirschmann Laborgerate, Germany 113 - 118
• Micropipettes, Pipette Controller, Plastic Tips, RIVIERA 119 - 121
• Bottle Top Dispenser, RIVIERA 122
• Spectrophotometer, ANTech 123- 124

• Pocket & Desktop Meters manufactured by Eu-Tech Instruments Pte. Ltd., Singapore 125 - 145
• Electronic Balances manufactured by Kern & Sohn GmbH, Germany 146 - 155

• ACZET Brand Balances 156 - 171

• Hot Plate Stirrer, Centrifuge, Magnetic Stirrer, Vortex, Mixer, NEUATION 173 - 176

• HOT PLATES, General purpose Instruments & Equipments, Rivotek 172, 176 - 197

Catalogue - cum - Price List

w. e. f. 01-04-2021
GST Extra as applicable
 ra
ie
iv
R
I n thiscatalogue- cum- pricelist
wehaveprovided thenecessary
technical detailsand dimensional
specifications. T heseare
subject tochangeswithout notice.
F or further detailspleasecontact
usat our H ead Officeaddress
at M umbai.
 ra
ie
iv
R
Name Melt No. Linear Transformation Density
Coeffi- Temperature g/Cm3
cient of °C
expansion
20/300°
10-6K-1

DURAN 8330 3.3 525 2.23

DURAN GROUP GmbH., Germany SUPREMAX 8409 4.1 745 2.57

FIOLAX 8412 4.9 565 2.34
The Laboratory Glassware Specialists AR/GLAS/
Soda-lime-
Silicate
glass 8350 9.1 525 2.50
The DURAN GROUP is one of the world's leading
manufacturers of borosilicate glass, a special glass invented by Types of glass for Laboratory Glassware manufacture
Dr. Otto Schott in 1887 and registered in 1938 under the trade
Laboratory Glassware can be manufactured from many types of
name DURAN. With sites in Mainz (DURAN Produktions GmbH
glass like DURAN, SUPREMAX, FIOLAX, AR-GLAS etc whose
& Co .KG), Wertheim (DURAN Group GmbH) and Pula (DURAN
basic characteristics can be seen from the table above.
d.d.), the DURAN GROUP has a complete value added chain
Unless stated otherwise, all products are made of DURAN
from the glass melting process right through to glass forming and
borosilicate glass. Articles made of other glasses are specifically
processing.
indicated in the catalogue.

Over the last 70 years, DURAN glass has proven itself both in DURAN The Laboratory glassware from DURAN GROUP
laboratories as well as in industrial and domestic applications. At
DURAN is borosilicate glass type 3.3 as specified in international
the same time their special industrial glass is used in numerous
standard ISO 3585 and DURAN products meet the most
industries, amongst others, mechanical engineering, the
important international standards, for example, the German,
electrical industry and medical technology. Well-known
British, American and French standards, Maximum chemical
companies spread across all continents trust in the quality of
resistance, minimum thermal expansion and the resulting high
their products. DURAN GROUP achieves solutions, based on
resistance to thermal shock are its principal properties. This
close dialogue with the customers, which meet individual
optimum physical and chemical performance makes DURAN
requirements and permit highly precise applications in widely
the ideal material for use in the laboratory and for large-scale
varying sectors.
industrial plants for the chemical industry. Moreover, it is widely
used on an industrial scale in all other areas of application in
After its spin-off from SCHOTT AG, the DURAN GROUP
which extreme heat resistance, resistance to thermal shock,
currently combines the strengths of its long history with the
mechanical strength and exceptional chemical resistance are
constantly present visionary spirit of the inventor Otto Schott.
required.

The unique precision involved in the manufacturing and Definition

processing of DURAN glass is the foundation of their corporate Glass is an inorganic mixture fused at high temperature which
philosophy and guideline for their day-to-day operations. solidifies on cooling but does not crystallize. It’s basic
components, network formers and modifiers are present in the
QUALITY WITHOUT COMPROMISE form of oxides in ordinary glasses. Typical glass formers (network
formers) are silica (SiO2), boric acid (B2O3), Phosphoric acid
Developing and manufacturing reliable and safe products in (P2O5) and, under certain circumstances, also aluminum oxide
accordance with the highest quality possible quality standards is (Al2O3). These substances are capable of absorbing (dissolving)
at the very centre of DURAN GROUP's quality policy. Its Quality certain amount of metal oxide without losing their glassy
Management System conforms to DIN EN ISO 9001:2000 and is character. This means that the incorporated oxides do not
integrated into daily practice. participate as glass formers but modify certain physical properties

3
 ra
ie
iv
R
of the glass structure as “Network modifiers”. very thin and almost nonporous silica gel layer that then forms on the
surface of the glass.
Glass Structure DURAN is highly resistant to water, neutral and acid solutions,
A large number of chemical substances solidify from the liquid state of concentrated acids, mixtures of acids, chlorine, bromine, iodine and
melt in the form of glass. The glass formation depends on the cooling organic substances.
rate and requires mixed types of bonding (covalent bond and ionic Only hydrofluoric acid, solutions containing fluoride ions (e.g.
bond) between the atoms or atom groups. As a result, glassforming ammonium fluoride), very hot phosphoric acid and alkaline solutions
products have a strong tendency while still in the melt for three- attack the surface of the glass, the degree of attack increasing as the
dimensional crosslinking by polymerisation in a largely random concentration and temperature rise.
manner. Crystals are formed when the individual atoms form a DURAN borosilicate glass is made from carefully selected raw
regular three-dimensional arrangement in what is known as a materials so that it is virtually free from impurities, particularly heavy
“Crystal lattice”, as soon as the particular substance changes from metals. This means that no contamination (even in ppm) of highly
the liquid to the solid state. Glass, however, on cooling from the liquid critical analysis solutions can occur when DURAN laboratory
state, forms a largely spatially random “network”. The main apparatus is used.
components which participate in the glass formation are therefore DURAN complies with the following requirements : hydrolytic
called “network formers”. Ions can be incorporated in this network of resistance class1, ISO 719-HGB1, acid resistance class 1 and alkali
glass-forming molecules, as a result of which they tear up the network resistance 2, ISO 659-A2.
in certain places and modify the network structure and thus glass
properties. That is why they are called “network modifiers”. Resistance to water
DURAN is specified as hydrolytic resistance class ISO 719-HGB 1
Chemical composition of DURAN
because in glass powder tests to DIN 12111, ISO 719, only 0.026 ml
DURAN glass which is used in the laboratory and in industrial scale HCl ( 0.01 mol/l) is dissipated from 1 g of glass powder after being
chemical plant, due to its excellent chemical and physical properties, held in water at 98°C for one hour. This corresponds to an alkali
has the following typical composition : weight loss of 0.008 mg Na2O per 1 g glass powder.
81% by weight SiO2 4% by weight Na2O/K2O
mg Na2O/g glass powder

13 % by weight B2O3 2% by weight Al2O3 0.03

0.02
Why is DURAN essential in the laboratory ?
0.01
Otto Schott’s discovery of borosilicate glass was a vital step forward
in the development of laboratory technology, for it enabled chemists 0 2 4 6 8h
Water attack on DURAN as a function of time (100°C) to DIN 12 111, ISO 719
to forge ahead into previously unexplored territory. Outstanding
Acid resistance
resistance to heat and thermal shock, excellent chemical durability
and high mechanical strength are the properties which make it possible DURAN is specified as acid resistance class 1 because in tests to
for borosilicate glass to be used under the most exacting conditions DIN 12116 on fire polished DURAN surfaces a weight loss of only
encountered in laboratory use. 0.3 mg /dm2 is measured after boiling for three hours in 18%
hydrochloric acid.
DURAN is borosilicate glass 3.3 How do laboratories benefit from its
special properties ?
Weight loss mg/100cm2

0.3

Chemical properties 0.2

DURAN’s chemical durability is far better than that of most metals and 0 1 2 3 4h

Acid attack on DURAN as a function of time to DIN 12 116

other materials, even over long periods of contact and at
temperatures of up to 100°C. Alkali resistance
The action of water and acids only releases small amounts of ions
DURAN is specified as alkali resistance class ISO 695 - A2 because
(mainly monovalent) from the glass. Future attack is inhibited by the
in tests to DIN 52322, ISO 695, on fire polished DURAN surfaces a

4
 ra
ie
iv
R
weight loss of only 134 mg/dm2 is measured after boiling for three Transforming Temperature 525°C
hours in a mixture comprising equal parts by volume of sodium DIN-ISO 3585
hydroxide solution (concentration 1 mol/l) and sodium carbonate Upon cooling from the melting temperature (101 to 103 dPa s), the
solution (concentration 0.5 mol/l) glasses go through a wide range of viscosity, which ranges from a
relatively viscous region (at about 104 to 108 dPa s) to the plastic
range (108 to 1012 dPa s) and up into the known elastic brittle state
Weight loss mg/100cm2

200
(>1013 dPa s). Thus, glass shows a constant increase in viscosity
100
upon cooling and has no solidification point as is the case for
0 2 4 6 8h
crystalline substances. For the processing of glass, certain sections
Alkali attack on DURAN as a function of time to DIN 52 322, ISO 695 of the viscosity range are of particular importance. In the
transformation range, the elastic brittle behaviour of the glass
Thermal properties changes to a noticeably viscous behaviour with increasing
DURAN has a very low coefficient of expansion and this gives it a temperature, which significantly changes all physical and chemical
high resistance to thermal shock. properties as a function of temperature. Thus the temperature region
of the transformation range determines the elimination of stress
Its maximum permissible operating temperature is 500°C for short
during heating and the onset of stresses during cooling of the glass.
term use and its thermal shock resistance is more than 3 times greater
The position of the transformation range is indicated by the
than that of conventional glass. Its linear coefficient of expansion
transformation temperature Tg DIN 52324.
over the temperature range 20°C to 300°C is 3.3 x 10-6 /K

Optical properties
DURAN shows no noticeable absorption in the visible region of the
spectrum and it, therefore, appears clear and colourless. Where fairly
large thickness is involved (e.g. when viewing a tube axially) a
greenish tint can be seen.
For use with light-sensitive materials the surface of the glass can be
amber stained. This causes heavy absorption in the shortwave
nm
range. The absorption limit of tinted glass is approximately 500 .
In the spectral range of approximately 310 to 2200nm the absorption
of DURAN is negligible.

Ecologically harmless
Special glass is considered completely safe ecologically. Glass is
manufactured from natural raw materials (sand, calcium carbonate Normal temperature dependence / viscosity curve of DURAN glass. Viscosity ranges of important processing
techniques, position of fixed points of viscosity and various limiting temperatures
and sodium carbonate) and does not contain any materials which
could be released and constitute a hazard to man or the environment.
To eliminate permanent stresses, DURAN is heated to a maximum
Glass can be reused several times and disposed of without difficulties.
temperature of 550°C and kept at this temperature for 30 minutes.
Use in microwave apparatus For the cooling which follows, the cooling rates listed in the table
below are recommended.
DURAN laboratory glass is suitable for use in microwave apparatus..
These excellent chemical and physical properties make DURAN the Temperature 550 to 480°C 480 to 400°C 400 to 20°C
range
ideal material for laboratory and pilot plant use.
Glass thickness Cooling rate

Physical properties and characteristics to

3 mm 12deg/min 24deg/min 480 deg/min
For the processing of DURAN by glassblowers
6 mm 3 deg/min 6 deg/min to 120 deg/min
Maximum use Temperature 500°C 12 mm 0.8deg/min 1.6 deg/min to 32 deg/min

5
 ra
ie
iv
R
These data are those of today’s knowledge and are intended to CLASS “A” & “AS” - Volumetric Glassware of Classes “A” & “AS” are
provide information on SCHOTT products and their possible suitable for certification. They have the same accuracy tolerances
applications. Thus, their meaning is not to ensure certain properties but differ in their delivery and waiting times. Glassware of class
of the products or their suitability for a particular application purpose. “AS” have faster delivery time with larger tip apertures.
CLASS “B” - Volumetric Glassware of Class “B” are not suitable for
HIRSCHMANN LABORGERATE GmbH & Co. KG. GERMANY
certification. They have larger tolerances than Classes “A” & “AS”.
The Volumetric Laboratory Glassware Specialists.
The Company was founded in 1967 by Mr. A. M. Hirschmann, who Certificate of Conformity
started in a very modest way producing volumetric glassware for For volumetric glassware to be used for research, commercial and
laboratories. pharmaceutical sectors the new German Fegeral Weights and
Today, after 31 years, they operate in many countries across the Measures Regulation of 12th August 1988 calls for conformity
globe and are acknowledged as one of the leading companies in certification from the side of the manufacturer instead of issuance
Europe in volumetric glassware having a 25% market share. of an individual certificate of examination by the manufacturer or by
All the products have the registered trademark HIRSCHMANN EM- an authorised testing institute. This means that random samples
TECHCOLOR and all the patents are owned by Mr. Hirschmann from each production batch are examined, by using prescribed
and members of the staff. The offered products are of very high measuring and test equipments. Only when the values of these
quality, developed and produced in house with help of computer samples are better than the legally permitted levels, are the products
operated & computer controlled - all the programmes are developed of this batch allowed to be marketed commercially with conformity
in house - working steps so that a high productivity is associated certification.
with high quality at all times. Non-conformity arising from human error in the production process
These EM - TECHCOLOR volumetric glassware are produced using cannot be ruled out with the traditional process of certifying
generally the high quality DURAN glass manufactured in Germany conformity. To completely eliminate the human error factor, all EM-
because from experience they found out, it is the most precise and TECHCOLOR branded volumetric glassware which are conformity
dependable. certified are calibrated not ‘by hand’ bur exclusively by a computer -
As a recognition of their efforts, their R & D production, sales and controlled robot. This robot measures the volumes out into the
distribution are certified and accredited as per ISO 9001 - a copy of glassware, identifies the meniscus optoelectronically and marks
their ISO 9001 certificate is shown in the following page. the volumetric glassware. Thereby the robot continuously performs
a self analysis and non-conformity arising out of the traditional
Volumetric Glassware - Classification
process is completely eliminated.
Volumetric glasswares like Pipettes, Burettes, Volumetric Flasks and In addition to the above mentioned perfect quality assurance
Measuring cylinders are divided into Classes “A”, “AS”, and “B”. HIRSCHAMNN now offers an indentification/traceability label for all
The class indicates the suitability for certification, degrees of conformity certified volumetric glassware which shows the
accuracy and DELIVERY and WAITING times. production year and an alphabet to identify the production batch. A
DELIVERY TIME is the time the liquid meniscus needs to pass from
sample of the label is given below.
the calibration mark to standstill at the tip or at the second calibration
mark.

LM
WAITING TIME starts when the liquid meniscus is in the tip or at the
second calibration mark has come to a stop. During the waiting time,
“residual liquid” flows downwards from the glass wall. This causes a
new rise of the meniscus. After the waiting time, the pipette tip is
K
J 21 CD
H
wiped on the wall of the vessel. A small amount of liquid remains in
the narrow section of the tip. But this has been taken into account
GFE
during calibration. The above label shall be printed on every individual conformity
Generally, the accuracy, tolerances and delivery time vary with the certified volumetric glassware of EM TECHCOLOR brand.
rated volume. The waiting times are pre-set.

6
 ra
ie
iv
R
TRACEABILITY AS REQUIRED BY ISO 9000. Machine cleaning

Apart from the documentation of test equipment which is required The machine cleaning of laboratory glasses in the laboratory
to date every volumetric glassware exactly, HIRSCHMANN also dishwasher is a milder treatment than cleaning in a dipping bath.
offers traceability demanded by ISO 9000. Should any The glasses only come into contact with the cleaning solution during
inconsistencies occur when using any EM-TECHCOLOR conformity the relatively short washing cycles, when this solution is sprayed
certified volumetric glassware in any laboratory, HIRSCHMANN is on to the glass surface via spray or injector nozzles.
able to check back each production batch document even after
Important notes for the user !
many years. However, in case any laboratory wish to document
their quality control individually HIRSCHMANN is able to offer on When working with glass, the limits of this material upon change in
request and on payment of Rs. 600/- per piece an individual temperature and mechanical stress must be heeded and strict
conformity certificate. safety precautions must be observed :

Thus HIRSCHMANN manufactured EM-TECHCOLOR branded • Never subject glassware to abrupt changes in temperature.
conformity certified volumetric glassware with dated batch Thus, do not remove it from the drying oven while hot and
identification is ideal for the documentation of volumetric place it on a cold or, which is worse, a wet laboratory bench.
measurement and for total traceability as demanded by ISO 9000. This is true in particular of thick walled glassware, such as
suction flasks or desiccators.
Cleaning of Laboratory Glassware
Cleaning • Provide apparatuses with a support via a suitable stand and
set up free of stress. Use for example, PTFE corrugated
Laboratory glassware can be cleaned manually in a dipping bath or
bellows to compensate for stresses or vibrations.
by machine in a laboratory dishwashing machine. A wide range of
cleaners and disinfectant cleaners is available for both methods in
• Glass apparatus (e.g. filtering flasks, desiccators, etc.) Must
specialist stores. In order to take good care of the laboratory
be handled with care when under pressure or vacuum.
apparatuses, they should be cleaned immediately after use at low
temperature, a short residence time and low alkalinity. Laboratory • To avoid setting up stresses in the glass, glass vessels under
apparatuses which have come into contact with infectious vacuum or pressure should not be heated from one side or
substances are first cleaned and then sterilised with hot air or steam. with an open flame.
This is the only way to prevent impurities from sticking on to the
glass and prevent damage of the glasses caused by any adhering • Before evacuating or pressurising glass vessels always check
chemicals. visually that they are not damaged in any way (heavy scratching
or other mechanical damage.) Damaged items should not be
Manual cleaning used under vacuum or pressure.
Wiping and scouring with a cloth or sponge, each of which is
impregnated with a cleaning solution, are generally known. • Never subject to abrupt changes in pressure for example never
Laboratory glasses must never be treated with abrasive scouring aerate evacuated glassware abruptly. Flat bottomed glassware
agents or sponges, since this would damage the surface. In the (for examples Erlenmeyer or flat-bottomed flasks) must not be
dipping bath procedure the laboratory glasses are as a rule, placed subjected to pressure or vacuum.
into the cleaning solution at room temperature for 20 to 30 minutes,
then rinsed with tap water and then distilled water. Do not lengthen Notes on complaints :
the time of exposure or increase the temperature except in the case Inspite of all the quality control measures should you have a product
of persistent impurities. In the case of laboratory glasses, lengthy complaint in relation to laboratory glasswares included in this
times of exposure at more than 70°C should be avoided in alkaline catalogue, then please contact our Authorised Dealers or us directly.

media, since this may result in destruction of the print.

7
 ra
ie
iv
R
Plastics used with Temperature resistance
laboratory glass up to °C

PE Polyethylene - 40 to + 80
PP2 Polypropylene - 404 to + 1404
PBT2 Polybutyleneteraphthlat - 45 to + 2003
PTFE2 Polytetrafluoroethylene - 200 to + 260
FEP Tetra-Fluor-Ethylene/Hexaflour-Propylene - 200 to + 200
ETFE2 Partially crystalline ethylene/ -100 to + 180
tetrafluoroethylene copolymer
VMQ2 Silicone rubber - 50 to + 230
EPDM Ethylene/propylene-diene-rubber - 45 to + 150
PU1 Polyurethane - 20 to + 135
FKM Fluorinated rubber - 20 to + 200
POM Polyoxymethylene - 40 to + 90
1
All laboratory glasses coated with PU may only be cleaned while moist
in order to avoid any electrostatic charge which may form.
2
These plastic types are recommended by the BGA (Bundesgesundheltsamt-
Federal Department of Health) in accordance with the specifications
applicable in each case.
3
Changes in colour may occur at temperature stresses above 180°C.
4
For a short time without mechanical stress.

Chemical resistance of plastics

PTFE/FEP

Classes of
EPDM

substances
ETFE

VMQ

POM
FKM
PBT

+ 20°C
PU
PE

PP

Alcohols1 aliphatic ++ ++ ++ ++ ++ + + ++ - +
Aldehydes + + ++ ++ ++ + ++ +
Alkaline solutions ++ ++ +/- ++ ++ - ++ ++ + +
Esters + + + ++ ++ - ++ + - -
Ethers - - + ++ ++ - - + - +
Hydrocarbons
aliphatic - ++ ++/+ ++ ++ - ++ ++ ++ +
Hydrocarbons
aromatic - + ++/+ ++ ++ - + ++ ++ +
Hydrocarbons
halogenated - + ++ ++ - + - ++ +
Ketones + + +/- ++ + - ++ + - +
Acids
dilute or weak ++ ++ ++ ++ ++ - ++ ++ ++ +
Acids,
trated or strong ++ ++ + ++ ++ - ++ + ++ -
Acids, oxidising
(oxidising agents) - + - ++ + - - + + -

++ = very good resistance + = good to limited resistance — = low resistance

8
RIVIERA brand low expansion borosilicate glass specified in this resistance class 1 and alkali resistance. Because of its low
catalogue is heat resistant, chemically neutral, thermally and coefficient of expansion it gives high resistance to thermal shock.
mechanically strong and is type 3.3, the type which conforms to Similarly its optical properties are also good which make the
international standard ISO 3585. Typical glass composition is absorption very negligible resulting in a clear and colourless glass.
SiO2 - 81 % by weight RIVIERA borosilicate low expansion glass does not contain any
B2O3 13 % by weight materials which could constitute a hazard to man or the
environment. The glass can be reused several times and disposed
Na2 O / K2O 4 % by weight of without any difficulties.
Al2O3 2 % by weight Glass fabricators/manipulators may take note that the maximum
RIVIERA brand borosilicate glass of 3.3 expansion has the same use temperature and transforming temperature for RIVIERA Flasks
chemical properties as is generally required for borosilicate is 500°C and 525°C, respectively.
chemically neutral glass such as hydrolytic resistance, acid

9
 ra
ie
iv
R
Beakers, Low Form, with Graduation and Spout,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. Height Qty. Per Maximum
Pack Price
No. ml mm mm Pcs Rs/Pc
70100 08 5 22 30 10 73.00
70100 10 10 26 35 10 74.00
70100 14 25 34 50 10 84.00
70100 17 50 42 60 10 72.00
70100 24 100 50 70 10 72.00
70100 29 150 60 80 10 72.00
70100 36 250 70 95 12 81.00
70100 41 400 80 110 12 131.00
70100 44 500 83 115 6 126.00
70100 48 600 90 125 6 133.00
70100 54 1000 105 145 6 261.00
70100 63 2000 130 185 4 527.00
70100 68 3000 150 210 1 1341.00
70100 73 5000 170 270 1 1971.00
70100 86 10000 220 350 1 6354.00
*5 ml & 10 ml will be supplied without graduation

Beakers, Low Form, with Graduation and Spout, DURAN DIN 12331, ISO 3819, USP Standard

Cat Capacity O. D. Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc
21106 14 25 34 50 10 184.00
21106 17 50 42 60 10 163.00
21106 24 100 50 70 10 117.00
21106 29 150 60 80 10 141.00
21106 36 250 70 95 10 98.00
21106 41 400 80 110 10 176.00
21106 48 500/600 90 125 10 156.00
21106 54 1000 105 145 10 317.00
21106 63 2000 132 185 10 594.00
21106 68 3000 152 210 4 1389.00
21106 73 5000 170 270 1 1980.00
21106 86 10000 217 350 1 8088.00
*10000 ml Capacity is a non - DIN non - ISO size and will be supplied without graduation

Beakers, Tall Form, with Graduation and Spout,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity O. D. Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc

70110 17 50 38 70 24 129.00
70110 24 100 48 80 24 134.00
70110 29 150 54 95 12 139.00
70110 36 250 60 120 12 134.00
70110 44 500 80 140 6 184.00
70110 54 1000 95 180 6 362.00
70110 63 2000 120 240 1 633.00

11
 ra
ie
iv
R
Beakers, Tall Form, with Graduation and Spout, DURAN DIN 12331, ISO 3819, USP Standard

Cat Capacity O. D. Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc

21116 17 50 38 70 10 200.00
21116 24 100 48 80 10 201.00
21116 29 150 54 95 10 203.00
21116 36 250 60 120 10 184.00
21116 41 400 70 130 10 223.00
21116 48 500/600 80 150 10 296.00
21116 54 1000 95 180 10 654.00
21116 63 2000 120 240 10 995.00
21116 68 3000 135 280 2 1454.00

Beakers, Tall Form, with Graduation without Spout,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity O. D. Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc

70120 36 250 60 120 12 129.00

70120 44 500 80 140 6 184.00
70120 54 1000 95 180 6 358.00

Beakers, Tall Form, with Graduation without Spout, DURAN USP Standard

Cat Capacity O. D. Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc
21117 17 50 38 70 10 198.00
21117 24 100 48 80 10 203.00
21117 29 150 54 95 10 203.00
21117 36 250 60 120 10 184.00
21117 41 400 70 130 10 223.00
21117 48 500/600 80 150 10 295.00
21117 54 1000 95 180 10 653.00

Beakers, Philips with Spout,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Base Height Qty. Per Maximum
Dia Pack Price
No. ml mm mm Pcs Rs/Pc
70130 36 250 68 110 10 360.00
70130 44 500 88 145 10 457.00

Beakers, Philips with Spout, DURAN

Cat Capacity Base Mouth Height Qty. Per Maximum

Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc

21141 29 150 59 49 87 10 711.00

21141 36 250 68 52 105 10 610.00
21141 44 500 86 59 142 10 765.00

12
 ra
ie
iv
R
Bottles, Aspirator, Graduated, with GL 45 Screwthread and Autoclavable Cap Complete with
NS Stopcock and Joint, Made from DURAN Laboratory Bottles

Cat Capacity Bottle Total Qty. Per Maximum

O. D. Height Pack Price
No. ml mm mm Pcs Rs/Pc
24703 54 1000 101 230 1 2570.00
24703 63 2000 136 267 1 2976.00
24703 73 5000 183 340 1 10599.00
24703 86 10000 230 415 1 14470.00
24703 91 20000 295 510 1 23765.00

Bottles, B.O.D., with I/C Stopper, RIVIERA

Suitable for determination of B.O.D. in industrial effluents, wastes and water as per method specified by the American Public
Health Association

Cat Capacity App. O.D.x Height of Qty. Per Maximum

Bottle only Pack Price
No. ml mm Pcs Rs/Pc

74100 365 300 73 x 131 10 538.00

Bottles Reagent, Narrow Mouth, Plain, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
70200 18 60 10 322.00
70200 25 125 10 323.00
70200 36 250 10 343.00
70200 44 500 10 373.00
70200 54 1000 8 569.00
70200 63 2000 8 941.00
70200 65 2500 1 985.00
70200 73 5000 1 6161.00
70200 86 10000 1 9826.00
70200 91 20000 1 16778.00

Bottles Reagent, Narrow Mouth, AMBER, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
70210 18 60 10 470.00
70210 25 125 10 495.00
70210 36 250 10 590.00
70210 44 500 10 697.00
70210 54 1000 8 896.00
70210 63 2000 1 1583.00

13
 ra
ie
iv
R
Bottles Reagent, with I/C Joint and Glass Stopper, Made from DURAN
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
211611 17 50 14/23 10 530.00
211612 24 100 19/26 10 537.00
211612 36 250 19/26 10 568.00
211613 44 500 24/29 10 656.00
211614 54 1000 29/32 10 932.00
211615 63 2000 34/35 10 1589.00

Bottles Reagent, with I/C Joint and Glass Stopper, AMBER (Amber processing done in India), Made from DURAN
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
211661 17 50 14/23 10 897.00
211662 24 100 19/26 10 1009.00
211662 36 250 19/26 10 1065.00
211663 44 500 24/29 10 1290.00
211664 54 1000 29/32 10 1758.00
211665 63 2000 34/35 10 2915.00

Bottles, Solution, CLEAR, Tooled Neck, DURAN DIN 12035, ISO 4796
Cat Capacity O. D. Height Qty. Per Maximum
Pack Price
No. ml mm mm Pcs Rs/Pc
21161 17 50 44 80 10 354.00
21161 24 100 54 95 10 420.00
21161 36 250 73 131 10 431.00
21161 44 500 89 162 10 447.00
21161 54 1000 111 200 10 748.00
21161 63 2000 138 246 10 1290.00
21161 73 5000 186 318 1 10005.00
21161 86 10000 234 398 1 13703.00
21161 91 20000 300 492 1 26422.00

Bottles, Solution, Tooled Neck, AMBER (Amber processing done in India), Made from DURAN
Cat Capacity O. D. Height Qty. Per Maximum
Pack Price
No. ml mm mm Pcs Rs/Pc
21166 17 50 44 80 10 644.00
21166 24 100 54 95 10 757.00
21166 36 250 73 131 10 815.00
21166 44 500 89 162 10 971.00
21166 54 1000 111 200 10 1366.00
21166 63 2000 138 246 10 2292.00

Bottles, Relative Density, Accuracy as per IS 5717 : 1970 with Capillary Bore, I/C Teflon Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Capacity Max. Body Joint Qty. Per Maximum
Tolerance Dia x Height Size Pack Price
No. ml ±ml mm Pcs Rs/Pc
70910 10 10 1 29 x 48 10/15 10 420.00
70910 25 25 2 40 x 55 10/15 10 459.00
70910 50 50 3 50 x 65 10/15 2 491.00

14
 ra
ie
iv
R
Bottles, Weighing, with I/C Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity App. O. D. x Ht. Qty. Per Maximum
of Bottle only Pack Price
No. ml mm Pcs Rs/Pc
70900 05 5 20 x 40 10 270.00
70900 15 15 25 x 65 10 286.00
70900 25 25 30 x 65 10 350.00
70900 60 60 40 x 90 4 522.00

Bottles, Weighing, Squat Form, with I/C Stopper,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity App. O. D. x Ht. Qty. Per Maximum
of Bottle only Pack Price
No. ml mm Pcs Rs/Pc
70900 20 20 50 x 35 10 585.00
70900 40 40 60 x 40 10 825.00

Bottles, Wash, Complete with I/C Pressure and Delivery Tube,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
size Pack Price
No. ml Pcs Rs/Pc
74210 36 250 24/29 10 620.00
74210 44 500 24/29 10 819.00
74210 54 1000 29/32 10 1023.00

I/C Pressure and Delivery Tube only for Wash Bottle,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
size Pack Price
No. ml Pcs Rs/Pc
74211 36 250 24/29 10 460.00
74211 44 500 24/29 10 502.00
74211 54 1000 29/32 10 522.00

Bottles, Gas Washing, Complete with I/C Pressure and Delivery Tube,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
size Pack Price
No. ml Pcs Rs/Pc
74212 25 125 29/32 10 1008.00
74212 36 250 29/32 10 1082.00
74212 44 500 29/32 10 1297.00

I/C Pressure and Delivery Tube only for Gas Washing Bottle,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
size Pack Price
No. ml Pcs Rs/Pc
74213 25 125 29/32 10 561.00
74213 36 250 29/32 10 588.00
74213 44 500 29/32 10 667.00

15
 ra
ie
iv
R
Bottles only for Gas Washing Bottle,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Approx. Qty. Per Maximum
O. D. x Ht. Pack Price
No. ml mm Pcs Rs/Pc
74214 25 125 50 x 165 10 910.00
74214 36 250 60 x 190 10 1006.00
74214 44 500 70 x 245 10 1234.00

LABORATORY BOTTLES, DURAN means of “saturated steam at a minimum of 120°C and 2 bar” (DIN
58946, pt1, 1987). The minimum effective application time (destruction
DURAN laboratory bottles are chemically resistant and stable. When fitted time + safety factor) is indicated in DIN 58946, pt2 as a duration of 20
with a plastic pouring ring dripping can be totally eliminated. As there is minutes at a sterilization temperature of 121°C.
only one size screw thread for all bottles from 100 ml onwards, the screw The following should be noted with respect to preparation for sterilization
caps and pouirng rings are fully interchangeable. The bottles, pouring • Soiled bottles must be cleaned first, otherwise microorganisms cannot
rings and caps are autoclavable and sterilizable. be effectively destroyed and chemicals adhereing to the surface can
damage it as a result of high temperature involved.
PROPERTIES : • To aviod a build up of pressure the screw cap should be left loose on
Light protection the bottle neck (one turn maximum). It should not be closed tight as
• Amber bottles upto 500 nm the pressure then cannot be balanced and the consequent difference
• Plastic coated bottles upto 380 nm useable as safe storage for in pressure can result in the bottlle bursting.
chemicals • Ensure that saturated stem is used and that it has unhindered access
Safe closure ensures storage of products as to all contaminated places. This is the only way to achieve effective
• Dairy products steam sterilization.
• Serums are kept sterile
High resistance to thermal shock
LABORATORY BOTTLES WITH PLASTIC COATING, DURAN
HANDLING : The resistant and transparent copolymer based plastic coating bonds firmly
Freezing substances with the glass surface and performs the following functions :
Recommendation : When freezing, always place the bottles at an angle • Protects the glass surface against mechanical damage (Scratch
(approx. 45°) and do not fill to more than 3/4 capacity (to increase surface protection)
area). Temperature limit -40°C as the plastic caps and pouring rings do • Holds the fragments together in the event of the glass breaking (Splinter
not withstand lower temperatures. protection)
Thawing forzen substances • Minimises liquid loss in the event of the glass breaking (Protection
The frozen material can be thawed by immersing the bottle in a liquid against contents escaping and spraying)
bath taking care that the temperature difference does not exceed 100°C. • Absorbs UV rays upto a light wavekength of 380 nm (Light protection)
This will ensure that the frozen material is heated uniformly from all sides
Do not expose plastic coated bottles to open flames or direct heat,
without damaging the bottle. It can, however, also be thawed slowly so
e.g. on a laboratory hot plate. The maximum operating temperature is
that the surface melts first, allowing the material to expand.
135°C. Bottle should not be exposed to this temperature for more than
Sterilization
30 minutes.
Bottles can be steam sterilized after washing. Following are the
Plastic coated bottles are suitable for freezing (-30°C) and it can also
recommendation and guidelines :
be used in microwaves. However, the plastic coating does not increase
Steam sterilization refers to “the destruction or irreversible inactivation of
the permissible pressure at which they can be used.
all microorganisms capable of reproduction” (DIN 58900, pt1, 1986) by

Bottles, Laboratory, with DIN thread, Graduated, CLEAR, ISO 4796-1, USP Standard
with PP Screw Cap and PP Pouring Ring (Blue), Autoclavable upto 1400C, DURAN

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21801 085 10 25 36 50 10 447.00
21801 145 25 25 36 74 10 303.00
21801 175 50 32 46 91 10 357.00
21801 245 100 45 56 105 10 364.00
21801 295 150 45 62 115 10 376.00
21801 365 250 45 70 143 10 376.00
21801 445 500 45 86 181 10 413.00
21801 515 750 45 95 208 10 548.00
21801 545 1000 45 101 230 10 651.00
21801 635 2000 45 136 265 10 1129.00
21801 695 3500 45 160 300 1 5382.00
21801 735 5000 45 182 335 1 6360.00
21801 865 10000 45 227 415 1 11573.00
21801 885 15000 45 268 450 1 21319.00
21801 915 20000 45 288 510 1 21948.00
21801 925 25000 45 1 49760.00
*10 & 25 ml Bottles will be supplied without pouring ring because of the specially formed glass tip.

16
 DURAN®GL 45 BOTTLE CARRYING SYSTEM NEW

The new modular Bottle Car r ying System fits standar d labor ator y bottles that have a GL 45
neck finish and is compatible with four bottle sizes 2, 5, 10 and 20 litr es. It is er gonomically
designed, and offer s health & safety benefits to the user and allows easy and safe tr anspor t of
bottles ar ound the labor ator y or pr oduction facility. It makes pour ing liquids fr om the lar ger
bottles mor e comfor table and safer. All mater ials ar e fully autoclavable.

Car r ying Handle GL 45 Bottle Collar

• Car r ying handle is suitable for • The col l ar is securely attached by pushing
bare or gloved hands down over the GL 45 thread with 4 teeth that
• Handle str ap is flexible enough lock under tr ansfer r ing.
to al low pour ing • The col l ar is only removable by cutting – so
attachment is 100% secure in use.
• A cut l ine indicator for removal of col l ar
when required.
Tightening Strap
• With indicator ar row
• End modified to prevent Hor izontal Straps
unthreading • Dur able stitched constr uction
• Made from “ anti- sl ip” mater ial

Pour ing Handle 4 sizes available

• Ergonomical ly shaped 2 L / 5 L / 10 L / 20 L
• Anti- sl ip gr ip

Fast and secure tightening

of the polypropylene str aps with two
side str ap adjuster s for the l arger 5,
10 and 20 l itre bottles

Safe and controlled pour ing

using handle
• Safer pour ing of l iquids using a
second lower “ Pour ing Handle”
located on the side str ap
• Avail able on the 5 l itre car r ier s
only
Easy and safe car r ying
using handle
• Handles attaches at the neck Lot Specific Retrace Code
and ful ly suppor ts the base for tr aceabil ity and cer tification

Bottle Carrying System suitable for GL 45, DURAN

Cat Suitable for Qty Per Maximum.

No. Capacity Pack price
Litres Pcs Rs./Pc.
29280 6304 2 1 4064.00
29280 7309 5 1 16751.00
29280 8605 10 1 17502.00
29280 9104 20 1 23734.00

17
 '85$1*URXSQRZ':./LIH6FLHQFHV

&RPSDQ\SURILOH
,Q-XQHWKHFRPSDQLHV'85$1*URXS:KHDWRQ,QGXVWULHVDQG.LPEOH&KDVHPHUJHGWRIRUPDQHZJOREDOFRPSDQ\Ǟ':.
/LIH6FLHQFHV
':./LIH6FLHQFHVFRPELQHVWKHH[SHUWLVHRIWKHDFFODLPHGSURGXFWEUDQGV'85$1p:+($721pDQG.,0%/(p$VRQHRIWKH
ZRUOGǡVOHDGLQJPDQXIDFWXUHUVRISUHPLXPODEJODVV':./LIH6FLHQFHVRIIHUVLWVFXVWRPHUVDFRPSOHWHUDQJHRIKLJKTXDOLW\

ODERUDWRU\JODVVZDUHǞIURPWKHFODVVLFGLVSRVDEOHVWRUHXVDEOHSUHFLVLRQJODVVZDUH$GGLWLRQDOO\':./LIH6FLHQFHVGHYHORSV
DQGSURGXFHVDZLGHUDQJHRISODVWLFODEZDUHDQGVSHFLDOW\SURGXFWVIRUOLIHVFLHQFHDSSOLFDWLRQVDVZHOODVSDFNDJLQJDQGVWRUDJH
VROXWLRQVIRUWKHSKDUPDFHXWLFDOLQGXVWU\
7KH':./LIH6FLHQFHVSURGXFWSRUWIROLRFRPSULVHVRYHUSURGXFWVPDQXIDFWXUHGDWVLWHVLQ(XURSH1RUWK$PHULFDDQG
$VLD*OREDOO\PRUHWKDQHPSOR\HHVZRUNRQWKHGHYHORSPHQWDQGSURGXFWLRQRILQQRYDWLYHSURGXFWVDQGVHUYLFHVWRPHHW
WKHKLJKH[SHFWDWLRQVRIFXVWRPHUVLQODERUDWRULHVDURXQGWKHZRUOGǞLQVSLUHGE\WKHFRPSDQ\VORJDQǤ([FHOOHQFHLQ\RXUKDQGVǥ
)LQGRXWPRUHZZZ':./LIH6FLHQFHVFRP

,QWURGXFWLRQ
)RUPHUFRPSDQ\ORJRV
1HZFRPSDQ\QDPH

':./LIH6FLHQFHV

1HZFRPSDQ\ORJR

3URGXFW/RJR
,QFRXUVHRIWKHPHUJHUWKHFXUUHQWSURGXFWORJRVRQSURGXFWVDQGSDFNDJLQJZLOOEHUHSODFHGE\QHZO\GHVLJQHG
SURGXFWORJRVşWKHSURGXFWTXDOLW\UHPDLQVXQFKDQJHG

)RUPHUSURGXFW )RUPHUSURGXFWORJR 1HZSURGXFWORJR 1HZSURGXFW

 ra
ie
iv
R
Bottles, Laboratory, with DIN thread, Graduated, AMBER, ISO 4796-1, USP Standard
(Amber processing done in India), with PP Screw Cap and PP Pouring Ring (Blue),
Autoclavable upto 1400C, Made from DURAN (Retrace Code Based Batch Certificate
shall be provided as per respective sizes of Plain Bottles having Cat Nos 21801.. series)
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21809 085 10 25 36 50 10 606.00
21809 145 25 25 36 74 10 486.00
21809 175 50 32 46 91 10 568.00
21809 245 100 45 56 105 10 597.00
21809 295 150 45 62 115 10 653.00
21809 365 250 45 70 143 10 638.00
21809 445 500 45 86 181 10 729.00
21809 515 750 45 95 208 10 942.00
21809 545 1000 45 101 230 10 1035.00
21809 635 2000 45 136 265 10 1737.00
21809 695 3500 45 160 300 1 9725.00
*10 & 25 ml Bottles will be supplied without pouring ring because of the specially formed glass tip.

Bottles, Laboratory, with DIN thread, Graduated, ISO 4796-1, USP Standard
without Cap and Pouring Ring, Autoclavable upto 1400C, DURAN
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21801 08 10 25 36 50 10 382.00
21801 14 25 25 36 70 10 238.00
21801 17 50 32 46 87 10 275.00
21801 24 100 45 56 100 10 282.00
21801 29 150 45 62 110 10 294.00
21801 36 250 45 70 138 10 294.00
21801 44 500 45 86 176 10 331.00
21801 51 750 45 95 203 10 466.00
21801 54 1000 45 101 225 10 569.00
21801 63 2000 45 136 260 10 1047.00
21801 69 3500 45 160 295 1 5300.00
21801 73 5000 45 182 330 1 6278.00
21801 86 10000 45 227 410 1 11491.00
21801 88 15000 45 268 445 1 21237.00
21801 91 20000 45 288 505 1 21866.00
21801 92 25000 45 1 On Request

19
 ra
ie
iv
R
Bottles, Laboratory, with DIN thread, Graduated, AMBER ISO 4796-1, USP Standard
(Amber processing done in Germany), without PP Screw Cap and PP Pouring Ring,
Autoclavable upto 1400C, DURAN
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21806 08 10 25 36 50 10 880.00
21806 14 25 25 36 74 10 665.00
21806 17 50 32 46 91 10 767.00
21806 24 100 45 56 105 10 790.00
21806 29 150 45 62 115 10 1011.00
21806 36 250 45 70 143 10 938.00
21806 44 500 45 86 181 10 1152.00
21806 51 750 45 95 208 10 1703.00
21806 54 1000 45 101 230 10 1567.00
21806 63 2000 45 136 265 10 2556.00
21806 69 3500 45 160 300 1 11981.00
21806 73 5000 45 182 335 1 14876.00
21806 86 10000 45 227 415 1 24756.00
21806 88 15000 45 268 450 1 29696.00
21806 91 20000 45 288 510 1 55076.00
21806 92 25000 45 1 On Request

Bottles, Laboratory, with DIN thread, Graduated, AMBER ISO 4796-1, USP Standard
(Amber processing done in India), without PP Screw Cap and PP Pouring Ring,
Autoclavable upto 1400C, Made from DURAN (Retrace Code Based Batch Certificate
shall be provided as per respective sizes of Plain Bottles having Cat Nos 21801.. series)
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21809 08 10 25 36 50 10 541.00
21809 14 25 25 36 74 10 421.00
21809 17 50 32 46 91 10 486.00
21809 24 100 45 56 105 10 515.00
21809 29 150 45 62 115 10 571.00
21809 36 250 45 70 143 10 556.00
21809 44 500 45 86 181 10 647.00
21809 51 750 45 95 208 10 860.00
21809 54 1000 45 101 230 10 953.00
21809 63 2000 45 136 265 10 1655.00
21809 69 3500 45 160 300 1 9643.00

20
 ra
ie
iv
R
Bottles, Laboratory, Round, Wide Mouth, Plain, with PP Screw Cap and USP Standard
PP Pouring Ring (Blue), Autoclavable upto 1400C, DURAN

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21860 365 250 80 95 105 10 788.00
11126 275 500 80 101 152 10 837.00
11127 135 1000 80 101 222 10 999.00
11127 155 2000 80 136 252 10 2135.00
21860 695 3500 80 160 275 1 7391.00
11139 495 5000 80 182 314 1 9658.00
11139 505 10000 80 227 389 1 17563.00
11139 515 20000 80 288 484 1 37884.00
12002 655 30000 80 340 548 1 73975.00
12001 545 50000 80 400 590 1 133761.00

Bottles, Laboratory, Round, Wide Mouth, AMBER (Amber processing done in India), USP Standard
with PP Screw Cap and PP Pouring Ring (Blue), Autoclavable upto 1400C, Made from DURAN
(Retrace Code Based Batch Certificate shall be provided as per respective sizes of Plain Bottles)
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
11627 365 250 80 95 105 10 1366.00
11627 275 500 80 101 148 10 1460.00
11627 135 1000 80 101 218 10 1565.00
11627 155 2000 80 136 248 10 3242.00
11627 695 3500 80 160 275 1 12011.00

Bottles, Laboratory, Round, Wide Mouth, AMBER (Amber processing done in Germany), USP Standard
without PP Screw Cap and PP Pouring Ring, Autoclavable upto 1400C, DURAN
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21866 36 250 80 95 105 10 1944.00
11784 29 500 80 101 148 10 2080.00
11784 30 1000 80 101 218 10 2237.00
11784 31 2000 80 136 248 10 4615.00
21866 69 3500 80 160 275 1 14388.00
11784 32 5000 80 182 311 1 20177.00
11784 33 10000 80 227 395 1 31070.00
11784 34 20000 80 288 483 1 65123.00

Bottles, Laboratory, with DIN thread, Graduated, CLEAR, ISO 4796-1, USP Standard
with Tamper Evident PP Screw Cap, Autoclavable upto 1400C, DURAN

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21802 365 250 45 70 143 10 545.00
21802 445 500 45 86 181 10 594.00
21802 545 1000 45 101 230 10 838.00
21802 635 2000 45 136 267 10 1328.00
21802 735 5000 45 183 340 1 6821.00

21
 ra
ie
iv
R
Bottles, Laboratory, with DIN thread, Graduated, Plastic Coated, ISO 4796-1, USP Standard
with PP Screw Cap and PP Pouring Ring (Blue), Autoclavable upto 1400C, DURAN PROTECT
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
10926 765 25 25 36 70 10 1148.00
10926 775 50 32 46 87 10 1209.00
21805 245 100 45 56 105 10 1357.00
21805 295 150 45 62 115 10 1400.00
21805 365 250 45 70 143 10 1566.00
21805 445 500 45 86 181 10 1598.00
21805 515 750 45 95 208 10 2151.00
21805 545 1000 45 101 230 10 2256.00
21805 635 2000 45 136 267 10 3619.00
21805 695 3500 45 160 300 1 12015.00
21805 735 5000 45 182 330 1 15510.00

Bottles, Laboratory, with DIN thread, Wide Mouth, Graduated, Plastic Coated, USP Standard
with PP Screw Cap and PP Pouring Ring (Blue), Autoclavable upto 1400C, DURAN PROTECT
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21865 365 250 80 95 105 10 2377.00
11601 525 500 80 101 148 10 2272.00
11601 635 1000 80 101 218 10 2820.00
11601 645 2000 80 136 248 10 4554.00
21865 695 3500 80 160 271 1 13911.00
11601 655 5000 80 182 311 1 18759.00

Bottles, Laboratory, with DIN thread, Graduated, Pressure Resistant, CLEAR, ISO 1595, USP Standard
without Screw Cap and Pouring Ring, Autoclavable upto 140°C, DURAN PRESSURE PLUS
Pressure Plus Bottles are the ideal choice where applications involve safe working under pressure or vacuum, sampling under
pressure, storage of gas generating media etc. Vacuum and / or pressure resistant from -1 to 1.5 bar due to modified geometry
(based on ISO 4796-1). Pressure resistance conforms to EN 1595 (safety tested by TUV). When under full pressure thermal
shock resistance is 30K and maximum usage temperature is +140°C. Graduations are printed in blue for visual differentiation
with standard laboratory bottles. Retrace code provided on individual bottles for online generation of batch certificates.

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21810 24 100 45 56 100 10 625.00
10922 34 250 45 70 138 10 736.00
10922 35 500 45 86 176 10 961.00
21810 54 1000 45 101 225 10 1042.00

Bottles, Laboratory, with DIN thread, Graduated, Pressure Resistant, AMBER, ISO 1595, USP Standard
(Amber processing done in Germany), without Screw Cap and Pouring Ring,
Autoclavable upto 140°C, DURAN PRESSURE PLUS

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21816 24 100 45 56 100 10 1759.00
10943 67 250 45 70 138 10 2443.00
10943 68 500 45 86 176 10 3019.00
21816 54 1000 45 101 225 10 3644.00

22
 ra
ie
iv
R
Premium Bottles, Laboratory, with DIN thread, Graduated, with Screw Cap and ISO 4796-1, USP Standard
Pouring Ring (PFA), Thermal Shock Resistant, Autoclavable upto +200 °C, DURAN
Premium Bottles contribute to safety in the laboratory while simplyfying handling. Important features are
• With enhanced temperature-rsistant screw cap manufactured from PFA including a matching pouring ring — can be used
from -196 °C to +200 °C. Raw material conforms to USP Class VI — also PTFE coated silicone seal.
• Dye-free cap and pouring ring to prevent marking or contamination of ovens, drying chambers and sterilization cabinets.
• Entire system comprising bottle, cap and pouring ring conforms to USP/FDA.
• Ideal for sterilization processes such as hot-air or dry sterilization and depyrogenation particularly in the pharmaceutical
industry.
• Retrace code. • Batch Certificates.

Cat Capacity DIN- O. D. Height Qty. Per Maximum

thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
11270 75 100 45 56 100 10 1836.00
11270 76 250 45 70 138 10 1914.00
11270 77 500 45 86 176 10 2070.00
11270 78 1000 45 101 225 10 2462.00

Bottles, Laboratory, Square, with DIN thread, Graduated, CLEAR, with PP Screw Cap USP Standard
and PP Pouring Ring (Blue), Autoclavable upto 1400C, Suitable for Milk Dilution Application, DURAN
Cat Capacity DIN- Width Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21820 245 100 32 50 109 10 545.00
21820 365 250 45 64 143 10 581.00
21820 445 500 45 78 181 10 648.00
21820 545 1000 45 94 222 10 977.00

Bottles, Laboratory, Square, with DIN thread, Graduated, AMBER (Amber processing done in India), USP Standard
with PP Screw Cap and PP Pouring Ring (Blue), Autoclavable upto 1400C, Made from DURAN
(Retrace Code Based Batch Certificate shall be provided as per respective sizes of Plain Bottles)
Cat Capacity DIN- Width Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21826 245 100 32 50 109 10 849.00
21826 365 250 45 64 143 10 916.00
21826 445 500 45 78 181 10 1040.00
21826 545 1000 45 94 222 10 1401.00

Bottles, Laboratory, Square, with DIN thread, Graduated, CLEAR, USP Standard
with Tamper Evident PP Screw Cap, Autoclavable upto 1400C, DURAN
Cat Capacity DIN- Width Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21821 365 250 45 64 143 10 725.00
21821 445 500 45 78 181 10 791.00
21821 545 1000 45 94 222 10 1120.00

Bottles, Laboratory, Square, with DIN thread, Graduated, USP Standard

without Cap, Autoclavable upto 1400C, DURAN
Cat Capacity DIN- Width Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21820 24 100 32 50 109 10 463.00
21820 36 250 45 64 143 10 499.00
21820 44 500 45 78 181 10 566.00
21820 54 1000 45 94 222 10 895.00

23
 ra
ie
iv
R
PP Screw Cap, without PP Pouring Ring for Laboratory Bottles, Autoclavable upto 1400C, Steam, DURAN

Cat DIN O. D. Height Qty. Per Maximum

thread Pack Price
No. GL mm mm Pcs Rs/Pc
29239 13 25 33 19 Blue 10 122.00
29239 19 32 40 24 Blue 10 122.00
29239 28 45 54 25 Blue 10 122.00
29338 280 45 54 25 Yellow 10 162.00
29338 286 45 54 25 Green 10 162.00
29338 288 45 54 25 Grey 10 162.00
11127 16 80* 87 40 Blue 10 285.00
* Quick Release Closure

Quick release closure for DURAN GLS 80 laboratory bottle with PTFE coated seal, from PSU compound
The material used is a special compound based on a polyarylsulphone. Consequently the chemical, thermal and mechanical properties of the material are
noticeably improved and matched to laboratory requirements. Thanks to the thread, the DURAN GLS 80 bottle can be opened and closed with only a three-
quarter turn. The seal, which is coated on both sides with PTFE, ensures the bottle can be tightly closed.
A Tmax
A matching PTFE pouring ring is available, permitting clean, drop-free use. 121°C 18O°C

Cat Thread Dia Height Qty. Per Maximum

Pack Price
No. GLS mm mm Pcs Rs/Pc
Cap
11658 88 80 86 40 5 3268.00
Pouring Ring
11673 07 80 6.85 5 1840.00

PP Pouring Ring for Laboratory Bottles, Autoclavable upto 1400C, Steam

Cat DIN Height Colour Qty. Per Maximum

thread Pack Price
No. GL mm Pcs Rs/Pc
29242 19 32 4 Blue 10 30.00
29242 28 45 4 Blue 10 30.00
10899 11 45 4 Green 10 50.00
10899 14 45 4 Grey 10 50.00
10899 17 45 4 Yellow 10 50.00
11601 66 80 4 Blue 10 229.00

PBT Screw Cap (Red), with PTFE coated Silicone Liner, without ETFE Pouring Ring for Laboratory Bottles,
Autoclavable upto 1800C, Hot-air, DURAN

Cat DIN O. D. Height Qty. Per Maximum

thread Pack Price
No. GL mm mm Pcs Rs/Pc
29240 13 25 33 23 10 594.00
29240 19 32 40 26 10 422.00
29240 28 45 54 28 10 594.00

ETFE Pouring Ring (Red) for Laboratory Bottles,

Autoclavable upto 1800C, Hot-air
Cat DIN Height Qty. Per Maximum
thread Pack Price
No. GL mm Pcs Rs/Pc
29244 19 32 4 10 143.00
29244 28 45 4 10 143.00

24
 ra
ie
iv
R
PP Tamper Evident Screw Cap (Blue), for Laboratory Bottles, with DIN Thread,
Autoclavable upto 1400C, Steam, DURAN
These caps are used for safely storing the contents of the bottles. The caps are screwed tightly on to the bottles and after a soft
“click” the plastic ring is fixed on the bottle neck. When the caps are opened for the first time, a perforation of the plastic ring is
broken thus showing the bottle has been opened. After the perforation of the plastic ring is broken, the cap may of course still
be used as an “ordinary” screw cap.
Cat DIN O. D. Height Qty. Per Maximum
thread Pack Price
No. GL mm mm Pcs Rs/Pc
10175 26 45 54 26 10 226.00

PP Membrane Cap - with PTFE permeable foil, DURAN

These caps can be used for all bottles with GL 45 thread and has a hole bored in the centre and a welded-in 0.2 µm PTFE foil.
They are temperature resistant upto 140 °C and an extremely quick 2-way pressure compensation from 0.1 bar. These are
especially suitable for filling, packing, transporting and storing gas - generating media, storing critical substances and in various
biotechnological applications. To autoclave media in laboratory bottles, the membrane cap, unlike ordinary caps, is screwed
tightly on to the bottles and there is no need for screwing and unscrewing the cap before or after the autoclaving process.
Cat DIN Qty. Per Maximum
thread Pack Price
No. GL Pcs Rs/Pc
29118 13 25 5 722.00
29118 19 32 5 757.00
29118 28 45 5 684.00
29118 91 80 2 954.00

PBT Screw Cap, for pH Sensor, DURAN

Cat DIN O. D. Heigth Qty. Per Maximum
thread mm mm Pack Price
No. GL Pcs Rs/Pc
11713 95 45 54 28 1 1786.00

PBT Screw Cap, with Aperture (Red) for Laboratory Bottles, Autoclavable upto 2000C, Hot-air, DURAN
Cat DIN Aperture Qty. Per Maximum
thread Bore Pack Price
No. GL mm Pcs Rs/Pc
29227 08 32 20 10 294.00
29227 10 45 34 10 746.00

DURAN PTFE COATED GL 45 SILICONE SEPTUM FOR PIERCING

High purity PTFE coated silicone septum for use with DURAN GL 45 open topped screw cap and all sizes of DURAN GL 45 laboratory
bottles. Can be used for the addition, inoculation or sampling using a syringe and needle. Ideal for chemistry, life science and biopharma
laboratories.
Applications: • The silicone is faced with highly resistant PTFE to protect
• Liquid transfer from HPLC solvent bottles the silicone from chemical attack by the solvents
• Aseptic reagent delivery or culture sampling using a syringe and • The septum is suitable for use with all GL 45 sizes of the DURAN
needle GL 45 bottles from 100 to 20,000 ml
• Reservoir cap for supplying laboratory instruments • A liquid tight seal is provided when used in combination with the
red PBT GL 45 open topped screw cap
Features: • Wide temperature usage range from – 50 °C up to + 180 °C
• Soft silicone rubber for easy needle penetration and resealability • Autoclavable at 121 °C for 15 minutes
• Manufactured from high purity, Platinum catalysed silicone rubber • Dry heat sterilizable at up to 180 °C
and high quality PTFE film, reducing the risk of solvent
contamination
Cat Description Qty. Per Maximum
Pack Price
No. Pcs Rs/Pc
29248 30 DURAN PTFE coated GL 45 Silicone Septum for piercing 10 856.00
(Platinum catalysed VMQ)

25
 ra
ie
iv
R
SILICONE SEAL PTFE coated VMQ, DURAN

Cat For Screw Caps Qty. Per Maximum

Red Pack Price
No. GL Pcs Rs/Pc
29248 13 25 10 139.00
29248 19 32 10 194.00
29248 28 45 10 333.00

DURAN GL 45 BROMOBUTYL RUBBER STOPPER

DURAN bromobutyl rubber closure provide a gas tight seal for all GL 45 laboratory bottles. Bromobutyl rubber is essentially
impermeable to most gases, and provides a controlled environment inside the glass bottle for oxygen sensitive materials.
Useful for maintaining anaerobic culture conditions. Butyl rubber allows for multiple punctures providing easy access to the
contents with a syringe.
Applications: • Material is virtually free of organics that might leach
• Culture of anaerobic microorganisms (pressure resistant into the incubation medium.
bottles recommended) • Elastic material for effective sealing and reliable self-
• Storage of anaerobic culture media (amber glass bottles sealing after needle piercing.
recommended) • A Upper surface features seven numbered hemispherical
• Aerobic methane oxidation (MOx) research impressions for needle-piercing. Autoclavable at 121 °C
• Storage of oxygen sensitive materials for 15 minutes
• Applications requiring gas purging or sample transfer • Wide usable temperature range: -50 to +121 °C.
via a syringe • Suitable for autoclaving / steam sterilising at 121 °C
for 20 minutes.
Features:
• Use with the DURAN GL 45 open topped / aperture screw
• Stopper shape, and material properties optimised to fit
cap for extra security (Standard DURAN original GL 45
DURAN GL 45 bottles with sizes from 100 to 20,000
lab bottles are not pressure resistant. If build up in
ml.
pressure is anticipated, it is recommended to use the
• Low permeability to air, gases and moisture.
stopper without the GL 45 red open top cap. The use of
• Manufactured from a high purity bromobutyl rubber
pressure resistant bottles such as DURAN pressure plus
elastomer.
should be considered)
• Conforms to EP 3.2.9 Type I closure for chemical and
penetration tests.
Cat Description Qty. Per Maximum
Pack Price
No. Pcs Rs/Pc
29206 28 DURAN Rubber Stopper for GL 45 Laboratory bottles, 10 366.00
straight plug, Grey Bromobutyl

Premium Cap for Laboratory Bottles, DURAN USP Standard

Made of PFA with PTFE coated silicone seal and pouring ring of PFA Compound formulated without colour dye to avoid risk of
leaching. Very high chemical resistance. High leak tightness through use of PTFE coated silicone seal.
Typical application : due to its properties, ideal for applications in the pharmaceutical industry, handling of aggresive media,
demanding sterilization processes such as hot air or dry sterilization and depyrogenation.
Easy Sterilization : The ‘Premium Cap’ is characterised by its temperature resistance ranging from -196 °C to +200 °C. Due
to high temperature range, this cap is suitable for many sterilization methods such as autoclaving or dry sterilization.
FDA Conformity : The ‘Premium Cap’ meets all requirements of both US Pharmacopoeia (USP Class VI) and European
Phamacopoeia (EP) and therefore also complies with FDA standards.
Cat Description DIN Colour d h Qty. Per Maximum
Thread Pack Price
No. GL mm mm Pcs Rs/Pc
11296 00 Cap 25 Colourless 32 22 5 642.00
10886 79 Cap 45 Colourless 51 26 5 1198.00
10886 78 Pouring Ring 45 Colourless - 4 5 331.00

26
 ra
ie
iv
R
of the YOUTILITY bottle is significantly faster. The slimmer
YOUTILITY bottle shape allows a more optimal use of limited
space in autoclaves and laboratory refrigerators. The bottles
can be conveniently stacked horizontally on their sides. Newly
TOUCH THE FUTURE designed ceramic print layout on the bottle clearly indicates the
nominal volume. The entire YOUTILITY bottle has an integrated
Retrace Code to allow product traceability via a downlodable
certificate of performance.

The new YOUTILITY bottle system helps to make laboratory

work easier, safer and more economical. Smaller YOUTILITY
THE DURAN® LABORATORY BOTTLE SYSTEM pack sizes are ideal for users with a lower usage requirement
for bottles. All sizes of YOUTILITY bottles are available in
MORE THAN JUST A BETTER BOTTLE packs of four complete bottles.
IT’S A COMPLETE SYSTEM YOUTILITY bottles come with a SCREW CAP having optimized
ergonomic shape with faster opening and closing thread

Other VERY USEFUL ACCESSORIES available for YOUTILITY

bottles are

BOTTLE TAG – Great for colour tagging your own bottles in

shared work areas

BOTTLE LABEL – Stays on when you need it to, peels off when
you don’t

DURAN YOUTILITY Screw Cap features a secure grip, fast

opening and quick closing. It has comfor table grooves and
ridges for a more efficient and easier tightening or removal,
especially with smaller sized or gloved hands. The inver ted
cone form and reduced cap diameter offers significant
advantages, making handling easier and safer. The shortened
thread inside the cap permits faster opening and closing, but is
fully compatible with standard DIN GL 45 bottles. The tried and
tested cap plug sealing system ensures a liquid tight seal.
Besides, it has a predefined labeling area.

The YOUTILITY screw cap features an integrated two or three

character Retrace Code to provide product traceability via a
Duran Group pioneered the screw threaded GL 45 DURAN® downlodable certificate. The cap is manufactured from a food
borosilicate glass laboratory bottle way back in 1972. Since its grade polypropylene that is fully autoclavable and totally
introduction over four decades ago, the DURAN®GL 45 laboratory reusable.
bottle has become the bottle of choice for laboratories around
SHOW YOUR TRUE COLOURS
the world.
Colourful GL 45 Bottle Tags offer an elegant solution to the
In response to the demands on laboratory efficiency Duran Group marking of laboratory bottles. The Bottle Tags can be easily and
initiated a project to develop a laboratory bottle system that was securely attached around the neck of the YOUTILITY Bottle,
more suited to today’s customer requirements. The result is even with the Screw Cap in place. The Bottle Tags feature a
DURAN YOUTILITY Bottle System, a new generation of graspable tab that makes them easy to remove with bare or
glass laboratory bottles for use in a wide and diverse range of gloved hands. The silicone Bottle Tags are chemically robust,
scientific research applications. The innovation does not stop at heat resistant, fully autoclavable and totally reusable. Their
the improved ergonomic bottle shape, but extends to dedicated potential uses in the laboratory are endless; in a shared lab, tag
accessories that incorporate many new innovative features to all your bottles with your favourite colour. Or colour tag all the
improve handling, sample identification and ease of use. bottles used for a par ticular application or in a cer tain
experiment. No more mix-ups. The GL 45 Bottle Tags are available
Each YOUTILITY bottle has many features that significantly in eight playful
improve the handling and utilization of bottles. The specially
shaped gripping zones on both sides of the bottles permit easier COLOURS :
and safer handling. With the new glass thread opening or closing Red, Orange, Yellow, Green, Blue, Purple, Black and White

27
 ra
ie
iv
R
YOUTILITY BOTLES LABELS technical markers. The labels are chemically resistant to typical
laboratory chemicals such as disinfectants and many solvents.
YOUTILITY LABELS were developed to address the need for a They have a wide -40 to + 150°C temperature performance
reliable, short term method of sample and bottle tracking and range making them suitable for use in fridges, freezers,
identification. The labels will stay on when you need them to do autoclaves, incubators and water baths without the risk of the
so, and are easy to remove when no longer required. This allows labels drying out or falling off.
the bottles to be quickly and easily cleaned, ready for re-use.
The YOUTILITY labels conveniently combine the flexibility of
The YOUTILITY label, is large rectangular label that fits all a blank written label with an autoclave/steam sterilization Class
four sizes of bottle. The labeling of bottles helps to prevent sample 1 process indicator (ANSI/AAMI/ISO 11140-1:2005). The labels
mix-ups. are non-hazardous, and free of toxic heavy metals.
YOUTILITY label formats are manufactured from a tear After use, the YOUTILITY labels may be easily and completely
resistant, matt white, polyester material coated with a high removed by peeling. The labels are supplied in a re-sealable,
performance adhesive. The print receptive top surface will splash resistant box containing 100 labels.
accept a variety of inks, including copier, printer, ball point and

Bottles, YOUTILITY, Clear Glass, with Screw Cap, Pouring Ring and Bottle Tag, USP Standard
Autoclavable upto 1400C, DURAN
Cat Capacity DIN- O. D. Height Qty. Per Maximum
thread Pack Price
No. ml GL mm mm Pcs Rs/Pc
21881 285 125 45 55 124 4 398.00
21881 365 250 45 66 158 4 412.00
21881 445 500 45 78 193 4 453.00
21881 545 1000 45 93 253 4 713.00
Utility Bottles, AMBER Colour Processing done either in Germany or in India - Prices Available On Request

Screw Cap & Pouring Ring, PP, Cyan, suitable for YOUTILITY Bottles, DURAN
Cat Description DIN Qty. Per Maximum
Thread Pack Price
No. GL Pcs Rs/Pc
29229 28 Cap Food Grade 45 10 189.00
29241 28 Pouring Ring — 45 16 72.00

Tags in Silicone for YOUTILITY Bottles, DURAN

Cat Colour Qty. Per Maximum
Pack Price
No. Pcs Rs/Pc
29243 29 Multi colour 16 175.00
29243 2818 Red 20 175.00
29243 2826 Orange 20 175.00
29243 2834 Yellow 20 175.00
29243 2842 Green 20 175.00
29243 2859 Blue 20 175.00
29243 2867 Purple 20 175.00
29243 2875 Black 20 175.00
29243 2883 White 20 175.00

Self Adhesive Label (Bottles only), for YOUTILITY Bottles, DURAN

Cat Qty. Per Maximum
Pack Price
No. Pcs Rs/Pack
29401 0203 100 2925.00

28
 ra
ie
iv
R
DURAN BAFFLED, WIDE MOUTH BOTTLE GLS 80
During mixing in standard GLS 80 laboratory bottles, the liquid moves in a swirling motion that
approximates a solid-body rotation. The entire fluid, and any suspended particles, moves like a
carousel. This is a very inefficient flow pattern, and very little mixing actually occurs. By adding
three vertical baffles into the inner surface of the GLS 80 bottles, the swirling motion is dis-
rupted, and a much more effective mixing occurs. The baffles improve the top-to-bottom circu-
lation and produce a greater radial mixing. The baffles also offer other advantages such as
suppressing the formation of a central vortex, and reducing dead-zones where mixing does not
occur.
Applications Features
• The baffled GLS 80 bottles are fully compatible with both the DURAN GLS 80 magnetic stirrers, and other
• Aerating
magnetic stir bars.
• Dissolving • The baffled GLS 80 bottles are fully autoclavable.
• Emulsifying • The wide 65 mm inner diameter of the GLS 80 wide mouth provides easy access to the contents, or for
cleaning.
• Homogenizing
• The baffles are moulded into the glass side wall of the bottles and form a continuous, smooth inner surface
• Mixing making clean up easy.
• Suspending • Compatible with full range of wide mouth GLS 80 connection cap systems for liquid addition or removal when
mixing with stir bars.
• The bottles feature an easy-to-read graduated volume scale.

Bottles Baffled Wide Mouth, GLS 80, supplied complete with Polypropylene Pouring Ring and GLS 80 Cap, DURAN

Cat Capacity Height Dia Qty. Per Maximum

ml Pack Price
No. mm mm Pcs Rs/Pc

21286 365 250 105 95 1 2215.00

21286 445 500 152 101 1 2471.00
21286 545 1000 222 101 1 2936.00

Additional Attachments (Optional)

Cat Description Benefits Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
29118 91 DURAN GLS 80 blue For use with magnetic stir bars. PTFE 2 1031.00
polypropylene vented cap* membrane vent allows gas exchange
with the atmosphere, but protects
from external contamination.
21263 91 DURAN Stirred reactor wide For use with 250 ml GLS 80 bottles. 1 63350.00
mouth cap for 250 ml bottle, Allows the efficient mixing of the
GLS 80 supplied with contents using a magnetic stirrer.
impeller shaped magnetic Liquid may be added or removed
stirrer, 4 connection ports via the optional tube connectors.
(2x GL 18 and 2x GL 14)*
12003 79 DURAN Stirred reactor wide For use with 500 or 1000 ml GLS 1 37062.00
mouth cap for 500 or 80 bottles. Allows the efficient mixing
1000 ml bottles, GLS 80 of the contents using magnetic stirrer.
supplied with anchor shaped Liquid may be added or a removed
magnetic stirrer, 4 connection via the optional tube connectors.
ports (2x GL 18 and 2x GL 14)*

* Note: DURAN baffled wide mouth bottles GLS 80 must be ordered separately.

29
 ra
ie
iv
R
DURAN TILT
TURNING USABILITY INTO SECURITY
Biosafety cabinets and clean hoods are essential for working with cell cultures under sterile condi-
tions. Unfortunately, they make the handling of media bottles difficult and time-consuming for re-
searchers. The DURAN TILT bottle changes everything. The TILT bottle has two positions: upright
for filter sterilization or storage, and tilted at 45° for pipetting. Take a look at cell culture media from
a new angle and discover a bottle system that eases handling and turns usability into security.

• Borosilicate 3.3 glass for reusability and

lower whole life costs
0° 5°
• Space saving shape for fridge storage and 4
water baths
• Low bottle height for easy handling in safety
cabinets
• GL 56 mouth and screw cap - bigger
opening for easy pipetting and safer handling
• 45º TILT position for pipetting without
holding the bottle FILTERING PIPETTING
In the upright position, the DURAN TILT bottle system is In the 45° tilted position, the DURAN® TILT bottle makes
• Tilted volume indicators for convenience ideal for filter sterilising or clarifying cell culture media. pipetting of media easier under the hood. The innovative
Low bottle height is practical in the biosafety design enables both good aseptic and ergonomic prac-
• Vacuum resistant bottle for safe filter cabinet.DURAN GL 45 thread adaptor allows any 45 mm tice.
filter units to be used with DURAN TILT bottle.
sterilisation
DURAN DURAN DURAN
Bottle top GL45 TILT
vacuum Thread Protective
filtration Adapter Light
unit Shield

DURAN TILT – MEDIA BOTTLE

Cat. No. Description Glass thread Height (incl. Qty per Maximum
cap) mm Pack Pcs. Price Rs./Pc.
21891 4459 DURAN® TILT Bottle, clear glass GL 56 151 4 1557.00
Complete with white polypropylene
screw cap 500 ml (supplied non-sterile)

DURAN TILT – ACCESSORIES AND REPLACEMENT PARTS

Cat. No. Description Material Colour Qty per Maximum
Pack Pcs. Price Rs./Pc.
29243 5601 DURAN TILT Light Shield includes four GL 56 Silicone / White and mixed colours 4 784.00
Bottle Tags (Orange, Yellow, Blue, Purple)
29243 5626 DURAN GL 56 Bottle Tag Orange Silicone / Orange 20 213.00
29243 5634 DURAN GL 56 Bottle Tag Yellow Silicone / Yellow 20 213.00
29243 5659 DURAN GL 56 Bottle Tag Blue Silicone / Blue 20 213.00
29243 5667 DURAN GL 56 Bottle Tag Purple Silicone / Purple 20 213.00
29119 5601 DURAN GL 45 thread adaptor for bottle top PTFE / White 1 3980.00
vacuum filtration unit (GL 45 external, GL 56 internal)
29401 5604 DURAN TILT GL 56 self-adhesive identification label Polyester / White 1 2238.00
for screw cap, 40 mm diameter
29229 5602 DURAN TILT GL 56 screw cap Polypropylene / White 10 291.00

DURAN BOTTLE TOP VACUUM FILTRATION UNITS

Cat. No. Description Membrane Pore Filter Thread Qty per Maximum
Size µmPES Dia mm mm Pack Pcs. Price Rs./Pc.
29270 2818 DURAN 500 ml Funnel Only Gamma sterilized 0.10 90 45 12 2264.00
29270 2826 DURAN 500 ml Funnel Only Gamma sterilized 0.20 90 45 12 1846.00
29270 2842 DURAN 500 ml Funnel Only Gamma sterilized 0.45 90 45 12 1431.00

30
 ra
ie
iv
R
DURAN® PURE
DEVELOPED FOR PHARMA
DURAN® PURE is a range of high-quality bottles and closures developed
for the needs of the pharmaceutical industry. DURAN® PURE meets
the requirements of the international pharmacopeias and is available
with the certifi cates required by the regulatory authorities

FEATURES
• EP/USP Type I borosilicate glass
• Size range 25 ml - 20 l
• Protective cover prevents contamination
• Single batch delivery CoA available
• 100% traceability
• 100% visual inspection
• Change control
• Drug Master File

APPLICATION AREAS
• Manufacturing of pharmaceutical products
• Storage of bulk drug intermediates
• Transportation of APIs
DURAN PURE bottle with DIN thread GL 45 and dust cover
Cat. No. 81801 5403

Detailed view of dust cover

31
 ra
ie
iv
R
DURAN® PURE Premium Screw Caps
DURAN® PURE Premium Screw Caps made from PFA
(fluoropolymer) are chemically and thermally very resistant
and compatible with autoclaving and other common
sterilization methods. The products include silicone seals
which are coated with highly inert PTFE.
DURAN ® PURE Premium Screw Cap GL 45
Cat. No. 89108 8679
FEATURES
• Caps made from PFA with PTFE coated silicone seal
• Produced and packaged in ISO Class 7 clean rooms
• Single batch delivery CoA available
• 100% traceability
• Change control
• Drug Master File DURAN ® PURE Premium Lip Seal Cap GL 45
Cat. No. 89886 2802

Bottles, with DIN thread, Graduated, CLEAR, with Dust Cover without Cap, USP / FDA confirmity (DMF No. 28042)
DURAN PURE ISO 3585

Cat Capacity DIN- O. D. Height Qty Per Maximum

thread Pallet Price
No. ml GL mm mm Pcs. Rs/Pc
81801 1401 25 25 36 74 940 On Request
81801 2406 100 45 56 105 540 On Request
81801 3608 250 45 70 143 280 On Request
81801 4407 500 45 86 181 360 On Request
81801 5403 1000 45 101 230 210 On Request
81801 6305 2000 45 136 267 120 On Request
81801 7301 5000 45 183 340 48 On Request
81801 8606 10000 45 230 415 30 On Request
81801 9105 20000 45 295 510 12 On Request

Bottles, with DIN thread, Graduated, AMBER, with Dust Cover without Cap, USP / FDA confirmity (DMF No. 28042)
DURAN PURE DIN ISO 3585

Cat Capacity DIN- O. D. Height Qty Per Maximum

thread Pallet Price
No. ml GL mm mm Pcs. Rs/Pc
81806 1406 25 25 36 74 940 On Request
81806 2402 100 45 56 105 540 On Request
81806 3604 250 45 70 143 280 On Request
81806 4403 500 45 86 181 360 On Request
81806 5408 1000 45 101 230 210 On Request
81806 6301 2000 45 136 267 120 On Request
81806 7306 5000 45 183 340 48 On Request
81806 8602 10000 45 230 415 30 On Request
81806 9101 20000 45 295 510 12 On Request

Premium Caps Made of PFA, Temperature Resistant from -196 ºC to +200 ºC, without colourants, USP/FDA
conformity, (DMF No. 28044) DURAN PURE
Cat Description DMF DIN- Qty. Per Maximum
No. thread Pack Price
No. GL Pcs Rs/Pc
89108 1306 Pure Premium Screw Cap 28044 25 5 On Request
89108 8679 Pure Premium Screw Cap 28044 45 5 On Request
89886 2802 Pure Premium Lip Seal Cap 031063 45 5 On Request
DURAN PURE bottles are also available in Wide Mouth GL 80 both in Plain & Amber. Please ask for details.

32
 ra
ie
iv
R
CONTAINER / CLOSURE SYSTEM FOR PHARMACEUTICAL INDUSTRY
Made of Borosilicate 3.3 Expansion USP Type 1 Glass, these vials are widely used world over for compatibility & stability
studies in pharmaceutical industries.
Vials complete with PP Caps Blue, DURAN
Cat Capacity DIN- O. D. Height Qty Per Maximum
thread Pack Price
No. ml GL mm mm Pcs. Rs/Pc
26990 04 5 18 22 40 100 227.00

*Available till stocks last.

NMR Tubes
NMR tubes are available accordinng to requirement in three accuracy classes. The correct tube can be selected depending on
magnetic field and spin. These tubes are noteworthy for their close tolerences and accuracy, especially to their straightness,
wall thickness and distribution of wall thickness. Consequently quick and accurate test results are achievable.

Cat Type Height O. D. I. D. Chamber Fre- Qty. Per Maximum

quency Pack Price
No. mm mm mm mm MHz Pcs Rs/Pc
23170 0006 Economic 5.1 178 4.94 ± 0.040 4.20 ± 0.040 0.070 100 100 253.00
23170 0117 Economic 178 4.97 ± 0.050 4.20 ± 0.050 0.070 300 50 305.00
23170 0211 Professional 178 4.97 ± 0.025 4.20 ± 0.025 0.030 400 50 1282.00
23170 0314 Scientific 178 4.97 ± 0.0013 4.20 ± 0.025 0.013 500 5 2388.00

SEPTA
SEPTAS made from silicon are available in various sizes for sample tests in R & D labortories and biotechnological research
centres. These products are manufactured in accordance with the size and bonding material. Due to features like non permeability
and low volatility the silicon SEPTAS are best suited for sealing applications. The quality of rubber used in latest moulding
process is of excellent grade to obtain precise shape of SEPTAS.

Cat Size Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
77610 14 B 14 10 96.00
77610 19 B 19 10 117.00
77610 24 B 24 10 138.00
77610 29 B 29 10 152.00
77610 34 B 34 10 183.00

33
 ra
ie
iv
R
CONNECTION SYSTEMS FOR DURAN LABORATORY BOTTLES
All systems facilitate the safe transfer of liquid media within an enclosed sterile system. Ideal for chemical and
biotechnological laboratories.

The new connection system is based on screw caps with a GL 45 thread and two or three connection ports. Tube
connections can be used to feed liquid media into or extract them from the bottle. A universal GL 14 tube adapter
and various inserts permit the use of four different tube outer diameters. An additional membrane filter with 0.2
µm pore size permits sterile pressure equalization at one of the ports.

The flexible modular system means that you can put together the various components individually depending on
requirements and application. The components are mutually compatible and are used together with the original
DURAN GL 45 laboratory bottles. To increase safety in the laboratory, it is advisable to use the pressure-
resistant DURAN pressure plus laboratory bottle.
Advantages
• The system is highly versatile in use, because the screw cap is based on the standardized GL 45 thread
• Four different tube outer diameters can be used – 1.6mm; 3.0mm; 3.2mm and 6mm.
• The components for the 2 and 3 port system are identical and interchangeable.
• Ports not in use can be sealed with a dummy cap.
• The caps and all individual components are made of PTFE and PP and can be completely autoclaved
together with the bottle, so that they can be reused repeatedly. It is not necessary to take the system apart
first.
• Working in the enclosed system retains toxic gases in the bottle. Similarly, the evaporation of expensive
substances can also be reduced.
Examples of Applications
• Use in Titration systems
• Use in Biotechnological processes, e.g. for pumping additives (culture media etc.) from storage containers
into reaction containers.
• Use in automated closed processes for transferring pure, sterile media
• Transfer of harmful, toxic substances in the enclosed system to reduce out-gassing.
• HPLC Laboratory Bottle with Connection System can be used for feeding solvents to HPLC machines,
disposal of waste media and also for sterile transfer of culture media under pressure e.g. fermenter.

Connection Systems - DURAN HPLC Bottle GL 45, 4 ports, 1000 ml Complete (incl. screw caps and seals)

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11298 20 HPLC Bottles Pressure plus, 1000ml 2 7086.00
• 1 x Screw Cap GL 45, 4 Ports
• 4 x Silicone Sealing Rings 1.6mm
• 4 x Silicone Sealing Rings 3.2mm
• 4 x Silicone Seals
• 4 x Screw Caps M8, for port

34
 EFFICIENT HPLC RESERVOIR BOTTLE, DURAN®
With conical base for efficient delivery of solvents
The DURAN® reservoir bottles have been specially designed for the storage and
delivery of high-performance liquid chromatography (HPLC) mobile phases and
solvents. Reservoirs have one central cavity for the inlet filter to allow the most
efficient delivery of mobile phase to HPLC analyzers. A safer and more
convenient alternative to flat bottomed glass media bottles, the conical bottom
reservoirs allow a greater recovery of solvent, without having to tilt the reservoir
and risk a solvent spill. The larger reservoirs allow longer, uninterrupted
analyses. These are especially useful during a weekend or lengthy
chromatographic analysis when there might be a risk of running out of solvents
during unattended operation.

FEATURES & BENEFITS

• Manufactured from the material of choice for solvent bottles: borosilicate 3.3
glass. This material has an exceptional chemical durability offering a very low
inorganic ion extractables profile, and the total absence of any organic
extractables.
®
• DURAN is a borosilicate glass type 3.3 as specified by the international
standard ISO 3585, and is classified as a “Type I, Class A low-expansion
borosilicate glass” as defined by ASTM-E438-1992
• DURAN® glass is classified by the USP / EP / JP pharmacopoeias as a “Type I
neutral glass”.
• Retrace Code, and certificate for manufacturing lot traceability.
• Available in five useful sizes 1 / 2 / 3.5 / 5 / 10 Liter.
• On the three larger sizes, the central cavity can accommodate magnetic stir
bars for improved mixing.
• Side vent / drain hole in the base for ultrasonic bath degassing, or water
drainage after cleaning.
• GL 45 thread fits standard HPLC connection caps.
• Durable white enamel volume graduations.
• Autoclavable at +121 °C or +134 °C.

APPLICATIONS
• Mobile phase reservoirs for HPLC
• Reagent supply to liquid handling systems

HPLC reservoir bottle, clear, conical base, GL 45, DURAN

Cat Suitable for Dia Height Qty Per Maximum.

No. Capacity OD Pack price
ml mm mm Pcs Rs./Pc.
21841 5407 1000 110 295 1 17492.00
21841 6309 2000 145 309 1 22285.00
Reservoirs have one central cavity
21841 6909 3500 165 353 1 29473.00
for the inlet filter to allow the most
21841 7305 5000 190 386 1 36332.00 efficient delivery of mobile phase to
21841 8601 10000 235 481 1 112359.00 HPLC analyzers
Accessories
29231 2801 DURAN® 3-port GL 45 HPLC delivery cap ¼”-28 thread 1 10761.00
For 3.2 mm OD tubing PTFE Complete with three ¼”-28
ETFE plugs and TFE/propylene o-ring
29231 0003 DURAN® ETFE blanking plug ¼”-28 thread 1 811.00
for 3-port HPLC GL 45 delivery cap

35
 ra
ie
iv
R
Connection Systems - DURAN HPLC Bottle GL 45, 4 ports, 500 ml Complete (incl. screw caps and seals)

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11298 21 HPLC Bottles Pressure plus, 500ml 2 6999.00
• 1 x Screw Cap GL 45, 4 Ports
• 4 x Silicone Sealing Rings 1.6mm
• 4 x Silicone Sealing Rings 3.2mm
• 4 x Silicone Seals
• 4 x Screw Caps M8, for port

Spare Parts for 1129820/1129821 Screw Cap HPLC

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11298 12 GL 45, 4 ports complete comprising 2 5518.00
• 1 x Screw Cap GL 45, 4 ports
• 4 x Silicone Sealing Rings 1.6mm I.D.
• 4 x Silicone Sealing Rings 3.2mm I.D.
• 4 x Silicone Seals
• 4 x Screw Caps M8, for port
11298 13 GL 45, 4 ports comprising 1 3155.00
• 4 x Silicone Sealing Rings 1.6mm
• 4 x Silicone Sealing Rings 3.2mm
• 4 x Silicone Seals
• 4 x Screw Caps M8, for port
11378 01 Pressure Equalization set for 4 port cap (0.2µm including membrane filter) 1 3311.00
11298 19 Spare Membrane PTFE GL 14 for sterile pressure compensation, 0.2µm 1 1020.00
21810 54 Spare Bottle DURAN pressure plus GL 45, 1000ml 10 1042.00
10922 35 Spare Bottle DURAN pressure plus GL 45, 500ml 10 961.00

Connection Systems - If you want to fit two bottles with a three port connection system and if you want to work with two
different tube diameters (1.6mm & 3mm) and pressure equalization, you will need the following individual components.
Cat Components Qty. to be Qty. Per Maximum
Ordered Pack Price
No. Pcs Pcs Rs/Pc
11297 51 Screw Cap GL 45 PP 3 Port GL14 1 2 3826.00
11298 14 Screw Cap GL 14 for hose connection 2 2 516.00
11298 15 Insert for Screw Cap GL 14 1.6mm 2 1 1714.00
11298 16 Insert for Screw Cap GL 14 3.0 mm 2 1 1714.00
11377 99 Pressure equalization set (complete) (size GL 45) 2 1 3311.00
11298 17 Insert for Screw Cap GL 14 3.2mm - optional 2 1 1714.00
11298 18 Insert for Screw Cap GL 14 6.0mm - optional 2 1 1714.00

37
 ra
ie
iv
R
Other Connection System Options

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11297 50 Screw Cap GL 45 PP 2 Port GL 14 2 3599.00
11562 92 Plastic Screw Cap Red, Closed, GL 14 2 242.00

Pouring Ring, Blue, GLS 80

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11601 66 GLS 80 10 229.00

Membrane Screw Cap, GLS 80, PP Blue

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
29118 91 GLS 80 2 954.00

If you want to fit two DURAN GLS 80 bottles with a 4 port system and want to work with two different tube diameters
(3.2mm and 10mm) and pressure equalisation with the redundant fourth port fitted with a screw cap, then you will need
the following individual components
Cat Components Thread Qty. to be Qty. Per Maximum
Ordered Pack Price
No. Pcs Pcs Rs/Pc
11601 67 Pressure Compensation set for 4 Port Screw Cap GL 18 2 2 3344.00
11601 69 Insert for Screw, 3.2mm GL 18 2 1 2056.00
11601 72 Insert for Screw Cap, 10.0mm GL 18 2 1 2056.00
11601 74 Screw Cap for Tube Connection, Blue GL 18 2 2 846.00
29310 91 Screw Cap GLS 80 PP 4 Port GL 18 GLS 80 1 2 8756.00
11706 82 Screw Cap, Red GL 18 1 2 376.00
(Optional)
11601 70 Insert for Screw Cap, 6.0mm GL 18 2 1 2056.00
11601 71 Insert for Screw Cap , 8.0mm GL 18 2 1 2056.00
11601 73 Insert for Screw Cap, 12.0mm GL 18 2 1 2056.00
11601 75 Screw Cap, 4 Port, +NS29/32, PP GLS 80 1 2 10945.00

38
 ra
ie
iv
R
EXPANSION OF THE CONNECTION SYSTEMS FOR DURAN
LABOTATORY GLASS BOTTLES: GL 45 SCREW CAP WITH
2 HOSE CONNECTIONS

The new connection system with hose connections

has been specially developed for the connection of
soft elastic tubing, which, for example, is used in
biotechnology when transferring media with the aid
of peristaltic pumps.
The curved hose connections prevent kinking of the
tubing. The grey PP core moves freely and allows
the vessel to be changed without twisting of the
firmly attached tubing.

Properties/application:
• Safe, sterile transfer of liquid media within a
closed system.
• Highly versatile because the screw cap is based
on the standard GL 45 thread.
• Ideal for use with elastic, soft tubing ID 6 - 9 mm
(Viton®. Tygon®, silicone)
• 2 PP hose connections, curved hose
connections on the top side, straight
connections on the lower side.
• Optional filter top part for sterile pressure
equalisation available.
• Temperature resistant up to +140°C
• Autoclavable/dishwasher proof

Cat Components Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
29310 28 GL 45 screw cap with 2 hose connectons 2 3479.00
11298 25 Filter top part for pressure equalization 2 3192.00

39
 ra
ie
iv
R
DURAN® Super Duty Beakers and Erlenmeyer Flasks • Uniform wall thickness distribution
Due to the increased quantity of glass, the mechanical • Proven DURAN® properties
sturdiness is significantly improved compared to • Type 1 glass / neutral glass as per USP, EP and JP
• Autoclavable / sterilisable
standard DURAN® Beakers and Erlenmeyer flasks.
• With Retrace Code (Batch Certificate via Internet)
A further product advantage is the strengthened (cooled)
• Easy-to-read scale
rim, which also provides additional impact resistance
• Fired-on, extremely durable printing
and considerably reduces the risk of breakage.
This extension to DURAN® product range therefore offers
the user optimum safety when working with the Application Note
glassware that is subject to heavy mechanical loading, To avoid thermal stressing of the glass, uniform and slow
even when it is cleaned and used frequently. Super Duty heating of super duty products is recommended. When
vessels also work out cheaper in the long run - thanks working at very high temperatures, or if rapid temperature
to the increased impact resistance changes are expected, standard DURAN® beakers and
Product Advantages Erlenmeyer flasks should be used, as these are characterized
• Increased mechanical sturdiness due to increased by excellent thermal shock resistance. However, the
uniform wall thickness mechanical sturdiness of these DURAN® standard products
• Reinforced, sturdy rim is limited compared with the super duty range.

Beaker, Super Duty, Low Form, with Spout, with Reinforced Rim, DURAN

Cat Capacity Diameter Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc
21107 29 150 60 80 10 777.00
21107 36 250 70 95 10 777.00
21107 41 400 80 110 10 1034.00
21107 48 600 90 125 10 1202.00
21107 54 1000 105 145 10 1907.00
21107 63 2000 132 185 10 3334.00
21107 73 5000 170 270 1 18597.00

Erlenmeyer Flask, Super Duty, Narrow Neck, with Reinforced Rim, DURAN

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc

21217 14 25 42 22 75 10 1319.00
21217 17 50 51 22 90 10 1335.00
21217 24 100 64 22 105 10 1211.00
21217 36 250 85 34 145 10 918.00
21217 44 500 105 34 180 10 1271.00
21217 54 1000 131 42 220 10 2012.00
21217 63 2000 166 50 280 10 3730.00
21217 73 5000 220 52 365 1 17887.00

Erlenmeyer Flask, Super Duty, Wide Neck, with Reinforced Rim, DURAN

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc

21227 24 100 64 34 105 10 1221.00

21227 36 250 85 50 140 10 926.00
21227 44 500 105 50 175 10 1283.00
21227 54 1000 131 50 220 10 2032.00

40
 ra
ie
iv
R
Gl 45 Stirred Reactor
A Tmax
• Drive using standard magnetic stirrers
• Variable stirrer shaft, can be used for 500 ml and 121 °C 140 °C
1,000 ml DURAN® GL 45 laboratory bottles
• Can be used up to 500 rpm Application:
• Compatible with the proven DURAN® connection The above mentioned properties make the DURAN® stirred reactor
ideal for the widest possible range of mixing processes in
systems; hoses with bores from 1.6 mm to 6.0 mm can
laboratories, e.g. mixing liquids or dissolving solids. The
be fitted connections available permits to introduce other media into the bottle
• Significantly improved through mixing compared to or remove media during mixing.
standard magnetic stirring bar The whole assembly is autoclaveable, so that it can be used in
• Materials used PP / PTFE / PEEK / stainless steel biological applications, for simple fermentation processes, for
• Parts in contact with media conform fully to FDA example. With the aid of components from the DURAN® connection
requirements system extra media bottles can be connected or sterile pressure
• Supply includes bottle (optional) compensation is possible

Cat Description Thread Qty. Per Maximum

Pack Price
No. GL Pcs Rs/Pc
®
12003 95 GL 45 stirred reactor, incl. 500 ml DURAN GL 45 bottle, folding magnetic 45 1 32690.00
stirrer and GL 45 PP cap with 2 x GL 14 ports, 2 x GL 14 PBT caps red
12003 96 GL 45 stirred reactor, incl. 1000 ml DURAN® GL 45 bottle, folding magnetic 45 1 33783.00
stirrer and GL 45 PP cap with 2 x GL 14 ports, 2 x GL 14 PBT caps red
12003 91 Folding magnetic stirrer for GL 45 stirred reactor, incl. shaft 45 1 28780.00
12003 90 Spare screw cap 2-ports for GL 45 stirred reactor 45 1 9214.00
(excl. stirrer) with GL 14 screw cap (PP, blue)

Gl 80 Stirred Reactor
materials used: PP / PTFE / PEEK / stainless steel A Tmax
The GLS 80 stirred reactor is suitable for a wide range of 121 °C 140 °C
laboratory mixing processes. The connections provided
permit addition or removal of media from the bottle during stirrer. The variable agitator shaft can be used in DURAN®
the mixing process. The whole assembly can be autoclaved GLS 80 laboratory glass bottles (1 000 and 2 000 ml) and
and is therefore suitable for use in the biological sector. By provides notably improved mixing in comparison with
using components from the GLS 80 connection system, an standard magnetic stir bars.
additional media bottle (OD hose: 1.6 - 12.0 mm) can be The agitating element is exchangeable and used up to 500
connected or a sterile pressure equalizer attached. Drive for rpm is possible. Typical applications: mixing of liquids,
the stirrer is provided by a standard commercial magnetic dissolving of solids, simple fermentation processes
Cat Description Thread danchor Qty. Per Maximum
stirrer Pack Price
No. GLS mm Pcs Rs/Pc
12003 79 stirred reactor cap, stirrer anchor type, magnetic, complete with shaft, 80 62 1 37062.00
connection and screw cap
12003 80 stirred reactor anchor type, magnetic, complete with GLS 80 bottle 80 62 1 38972.00
1000 ml GL 14 screw cap (PP, blue), 2 x GL14 screw cap (PBT red),
2 x GL18 screw cap (PBT red)
12003 81 stirred reactor anchor type, magnetic, complete with GLS 80 bottle 80 62 1 39995.00
2000 ml GL 14 screw cap (PP, blue), 2 x GL14 screw cap (PBT red),
2 x GL18 screw cap (PBT red)
Accessories for GLS 80 stirred reactor

Cat Description dia dia Qty. Per Maximum

anchor impeller Pack Price
No. stirrer mm stirrer mm Pcs Rs/Pc
12003 82 Stirrer impeller type, magnetic, for GLS 80 stirred reactor 62 1 22356.00
12003 83 Stirrer anchor type, magnetic, for GLS 80 stirred reactor 62 1 22356.00
12003 85 Spare screw cap for GLS 80 stirred reactor, PP blue/grey 1 11180.00
12003 86 Spare shaft for GLS 80 stirred reactor, stainless steel, 1 6975.00
incl. PEEK connection

41
 ra
ie
iv
R
DURAN® Production Bottles 10 and 20 litres • Depyrogenisable
• Ideal for mixing and Stirring processes with large • Individual scaling and labelling possible
and heavy magnetic stir bars. • Retrace Code
• Type 1 glass / neutral glass as per USP, EP and JP • Also available with scratch and breakage protection
• Marked increase in mechanical stability • No BSE / TSE endangering substances contained
• Uniform wall thickness • With standard (GL 45) or wide neck (GLS 80) thread

Production Bottle, Narrow Neck, GL 45, Clear, Increased Wall Thickness, without cap and ring, DURAN

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
11602 00 10000 1 31173.00
11601 00 20000 1 69729.00

Production Bottle, Wide Neck, GLS 80, Clear, Increased Wall Thickness, without cap and ring, DURAN

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
11602 20 10000 1 38122.00
11601 10 20000 1 77532.00

Screw Cap, GLS 80 PSU with PTFE Silicone Seal, DURAN

Cat Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11658 88 1 3345.00

PTFE Pouring Ring, GLS 80, DURAN

Cat Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
11673 07 1 1883.00

42
 ra
ie
iv
R
Bottles, Culture, Roux-Type, Conical Neck, Eccentric, DURAN

Cat Capacity Breadth Depth Height Qty. Per Maximum

Pack Price
No. ml mm mm mm Pcs Rs/Pc

21571 58 1200 132 56 275 10 6647.00

Bottles, Wash, LDPE Plastic, RIVIERA

Bottles & delivery tubes made of chemically resistant low density polyethylene, flexible with screw cap.
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc

74200 36 250 10 80.00

74200 44 500 10 100.00

Burettes, Straight Bore Stopcock, Accuracy as per Class ‘A’, with Individual Certificate IS 1997 : 2008
of Performance, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Graduation Tolerance App. Total Qty. Per Maximum
Division Height Pack Price
No. ml ml ±ml mm Pcs Rs/Pc
70301 60 10 0.05 0.02 530 5 1885.00
70301 70 25 0.10 0.05 530 5 1845.00
70301 75 50 0.10 0.05 780 5 2100.00
70301 80 100 0.10 0.10 830 5 3030.00

Burettes, Rotaflow Needle Valve Stopcock, Accuracy as per Class ‘A’, with Individual Certificate IS 1997 : 2008
of Performance, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Graduation Tolerance App. Total Qty. Per Maximum
Division Height Pack Price
No. ml ml ±ml mm Pcs Rs/Pc
70401 60 10 0.05 0.02 530 5 1665.00
70401 70 25 0.10 0.05 530 5 1713.00
70401 75 50 0.10 0.05 780 5 1952.00
70401 80 100 0.10 0.10 830 5 2742.00

Burettes, Schellbach, Main Point Ring Graduation, Straight Stopcock with Glasskey, DIN EN ISO 385
Blue Graduation, Class ‘AS’, Conformity Certified, with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Qty. Per Maximum

Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
31401 60 10 0.02 0.02 2 4662.00
31401 70 25 0.05 0.03 2 4662.00
31401 75 50 0.10 0.05 2 4662.00

43
 ra
ie
iv
R
Burettes Straight Bore Stopcock, Accuracy as per Class ‘B’, IS 1997 : 2008
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Graduation Tolerance App. Total Qty. Per Maximum
Division Height Pack Price
No. ml ml ±ml mm Pcs Rs/Pc
70300 60 10 0.05 0.05 530 5 641.00
70300 70 25 0.10 0.10 530 5 627.00
70300 75 50 0.10 0.10 780 5 670.00
70300 80 100 0.10 0.20 830 5 952.00

Burettes, Rotaflow Needle Valve Stopcock, Accuracy as per Class ‘B, IS 1997 : 2008
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Graduation Tolerance App. Total Qty. Per Maximum
Division Height Pack Price
No. ml ml ±ml mm Pcs Rs/Pc
70400 60 10 0.05 0.05 530 5 565.00
70400 70 25 0.10 0.10 530 5 531.00
70400 75 50 0.10 0.10 780 5 574.00
70400 80 100 0.10 0.20 830 5 857.00

Burettes, Schellbach, Main Point Ring Graduation, Straight Valve Stopcock with PTFE Spindle, DIN EN ISO 385
Blue Graduation, Class ‘AS’, Conformity Certified, with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, EM-TECHCOLOR Brand
Cat Capacity Graduation Tolerance Qty. Per Maximum
Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
31402 60 10 0.02 0.02 2 4942.00
31402 70 25 0.05 0.03 2 4942.00
31402 75 50 0.10 0.05 2 4942.00

Burettes, Automatic, Straight Bore Stopcock with Glasskey, White Graduation, IS 1997 : 2008
Accuracy as per Class ‘A’ , with Individual Certificate of Performance, Complete with Reservoir,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
70312 60 10 1 6700.00
70312 70 25 1 6515.00
70312 75 50 1 7285.00
70312 80 100 1 8280.00

Burettes, Automatic, Rotaflow Stopcock, White Graduation, Accuracy as per Class ‘A’, IS 1997 : 2008
with Individual Certificate of Performance, Complete with Reservoir,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
70412 60 10 1 6495.00
70412 70 25 1 6325.00
70412 75 50 1 7020.00
70412 80 100 1 7980.00

44
 ra
ie
iv
R
Burettes, Automatic, Mounted on Reservoir, Schellbach, Main Point Ring Graduation,
Straight Stopcock with Glasskey, Blue Graduation, Class ‘AS’, Conformity Certified with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, Made from EM-TECHCOLOR Brand
Batch Certificate shall be for Burette only (Cat. No. 31401..)
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
314001 60 10 1 7855.00
314001 70 25 1 8830.00
314001 75 50 1 8830.00
* Reservoir Capacity : 500 ml for 10 ml and 2000 ml for 25 & 50 ml size.

Burette, Automatic, Mounted on Reservoir, Schellbach, Main Point Ring Graduation,

Straight Valve Stopcock with PTFE Spindle, Blue Graduation, Class ‘AS’, Conformity Certified with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, Made from EM-TECHCOLOR Brand
Batch Certificate shall be for Burette only (Cat. No. 31402..)
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
314002 60 10 1 8130.00
314002 70 25 1 9100.00
314002 75 50 1 9100.00
* Reservoir Capacity : 500 ml for 10 ml and 2000 ml for 25 & 50 ml size.

Burettes, Automatic, Straight Bore Stopcock with Glasskey, White Graduation, IS 1997: 2008
Accuracy as per Class ‘B’, Complete with Reservoir, Made from Heat Resistant,
Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
70311 60 10 1 4310.00
70311 70 25 1 4240.00
70311 75 50 1 4595.00
* Reservoir Capacity : 500 ml for 10 ml and 2000 ml for 25 & 50 ml size.

Burettes, Automatic Zero, Rotaflow Stopcock, White Graduation, IS 1997: 2008

Accuracy as per Class ‘B’, Complete with Reservoir, Made from Heat Resistant,
Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
70411 60 10 1 4200.00
70411 70 25 1 4085.00
70411 75 50 1 4490.00
* Reservoir Capacity : 500 ml for 10 ml and 2000 ml for 25 & 50 ml size.

Reservoir for Automatic Burette.

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
2180 144 500 B 29 1 758.00
2180 163 2000 B 34 1 1749.00
2180 173 5000 B 34 1 7708.00

45
 ra
ie
iv
R
Condensers, Liebig, with Sealed Inner Tube,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat App. Length App. Overall Ground Qty. Per Maximum
of Jacket Height Joint Pack Price
No. mm mm Pcs Rs/Pc
70800 20 200 345 19/15 1 347.00
70800 30 300 445 19/15 1 377.00
70800 40 400 545 19/15 1 427.00

Condensers, Liebig, Drip Tip with I/C Inner and Outer Joint,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat App. Length App. Overall Socket Cone Qty. Per Maximum
of Jacket Height Joint Joint Pack Price
No. mm mm Pcs Rs/Pc
70810 20 200 350 19/26 19/26 1 403.00
70810 30 300 450 24/29 24/29 1 487.00
70810 40 400 550 24/29 24/29 1 548.00

Condensers, Allihn, Drip Tip with I/C Inner and Outer Joint,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat App. Length App. Overall Socket Cone Qty. Per Maximum
of Jacket Height Joint Joint Pack Price
No. mm mm Pcs Rs/Pc
70811 20 200 350 19/26 19/26 1 525.00
70811 30 300 450 24/29 24/29 1 700.00
70811 40 400 550 24/29 24/29 1 805.00

Condensers, Graham, Coil Distillate type, Drip Tip with I/C Inner and Outer Joint,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat App. Length App. Overall Socket Cone Qty. Per Maximum
of Jacket Height Joint Joint Pack Price
No. mm mm Pcs Rs/Pc
70812 30 300 450 24/29 24/29 1 805.00
70812 40 400 550 24/29 24/29 1 826.00
70812 50 500 650 24/29 24/29 1 1042.00

Condensers, Double Surface, Davies,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat App. Length Socket Cone Qty. Per Maximum
of Jacket Joint Joint Pack Price
No. mm Pcs Rs/Pc
70813 159 150 19/26 19/26 1 910.00
70813 219 200 19/26 19/26 1 1490.00
70813 319 300 19/26 19/26 1 1890.00
70813 324 300 24/29 24/29 1 2070.00
70813 329 300 29/32 29/32 1 2305.00

46
 ra
ie
iv
R
Cylinders, Colour Comparison, Nessler, Flat Bottom, Graduated, Accuracy as per Class ‘B’ of I. S. 4161 : 1967,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Approximate Qty. Per Maximum
O. D. x Height Pack Price
No. ml mm Pcs Rs/Pc

70600 75 50 25 x 150 10 170.00

70600 80 100 34 x 180 10 250.00

Cylinders, Measuring, Class ‘B’, Graduated, IS 878 : 2008

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Graduation Tolerance Qty. Per Maximum

Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
70700 60 10 0.2 0.20 2 254.00
70700 70 25 0.5 0.50 2 304.00
70700 75 50 1.0 1.00 2 334.00
70700 80 100 1.0 1.00 2 383.00
70700 86 250 2.0 2.00 2 701.00
70700 90 500 5.0 5.00 2 921.00
70700 93 1000 10.0 10.00 1 1399.00

Cylinders, Measuring, with Hexagonal Base and Short Line Graduation, DIN EN ISO 4788
Blue Graduation, Class ‘B’, DURAN/EM-TECHCOLOR Brand
Cat Capacity Graduation Tolerance Qty. Per Maximum
Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
22301 60 10 0.2 0.150 2 369.00
22301 70 25 0.5 0.375 2 389.00
22301 75 50 1.0 0.750 2 427.00
22301 80 100 1.0 0.750 2 487.00
22301 86 250 2.0 1.500 2 892.00
22301 90 500 5.0 3.750 2 1172.00
22301 93 1000 10.0 7.500 1 1910.00
22301 94 2000 20.0 15.000 1 3775.00

Cylinders, Measuring, Class ‘A’, Graduated, with Individual Cerificate of Performance, IS 878 : 2008
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Graduation Tolerance Qty. Per Maximum

Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
70703 60 10 0.2 0.10 2 470.00
70703 70 25 0.5 0.25 2 540.00
70703 75 50 1.0 0.50 2 650.00
70703 80 100 1.0 0.50 2 740.00
70703 86 250 2.0 1.00 2 1095.00
70703 90 500 5.0 2.50 2 1530.00
70703 93 1000 10.0 5.00 1 1870.00

47
 ra
ie
iv
R
Cylinders, Measuring, with Hexagonal Base and Main Point Ring Graduation, Blue Graduation, DIN EN ISO 4788
Conformity Certified, with Batch Certificate, Class ‘A’, DURAN
Cat Capacity Tolerance Qty. Per Maximum
Pack Price
No. ml ±ml Pcs Rs/Pc
21390 0804 10 0.10 2 571.00
21390 1406 25 0.25 2 659.00
21390 1706 50 0.50 2 795.00
21390 2402 100 0.50 2 902.00
21390 3604 250 1.00 2 1332.00
21390 4403 500 2.50 2 1856.00
21390 5408 1000 5.00 1 2268.00
21390 6301 2000 10.00 1 4407.00

Cylinders, Measuring, with Hexagonal Base and Main Point Ring Graduation, Blue Graduation, DIN EN ISO 4788
Conformity Certified, with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, Class ‘A’, DURAN/EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Qty. Per Maximum

Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
22401 60 10 0.2 0.100 2 571.00
22401 70 25 0.5 0.250 2 659.00
22401 75 50 1.0 0.500 2 795.00
22401 80 100 1.0 0.500 2 902.00
22401 86 250 2.0 1.000 2 1332.00
22401 90 500 5.0 2.500 2 1856.00
22401 93 1000 10.0 5.000 1 2268.00
22401 94 2000 20.0 10.000 1 4407.00

Cylinders, Measuring, with Hexagonal Base and Main Point Ring Graduation, Schellbach, DIN EN ISO 4788
Blue Graduation, Conformity Certified, with Batch Certificate,
Calibrated at 3 Graduation levels for accuracy and tolerance, Class ‘A’, DURAN/EM-TECHCOLOR Brand
Cat Capacity Graduation Tolerance Qty. Per Maximum
Division Pack Price
No. ml ml ±ml Pcs Rs/Pc
22201 60 10 0.2 0.100 2 1018.00
22201 70 25 0.5 0.250 2 1034.00
22201 75 50 1.0 0.500 2 1062.00
22201 80 100 1.0 0.500 2 1117.00
22201 86 250 2.0 1.000 2 2451.00
22201 90 500 5.0 2.500 2 2582.00
22201 93 1000 10.0 5.000 1 3657.00
22201 94 2000 20.0 10.000 1 9135.00

Cylinders, Measuring, with I/C Joint & Glass Stopper, Class ‘B’, Graduated, IS 878 : 2008
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
70701 60 10 B 10 2 390.00
70701 70 25 B 14 2 435.00
70701 75 50 B 14 2 490.00
70701 80 100 B 19 2 605.00
70701 86 250 B 24 2 1025.00
70701 90 500 B 34 2 1420.00
70701 93 1000 B 34 1 2050.00

48
 ra
ie
iv
R
Cylinders, Measuring, with I/C Joint & Glass Stopper, Class ‘B’, DIN EN ISO 4788
Made from DURAN/EM-TECHCOLOR Brand
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
223000 60 10 B 10 2 620.00
223010 70 25 B 14 2 685.00
223010 75 50 B 14 2 745.00
223020 80 100 B 19 2 820.00
223030 86 250 B 24 2 1390.00
223050 90 500 B 34 2 1840.00
223050 93 1000 B 34 1 2810.00
223050 94 2000 B 34 1 4455.00

Cylinders, Measuring, with I/C Joint & Glass Stopper, Class ‘A’, Conformity Certified, with DIN EN ISO 4788
Batch Certificate, Calibrated at 3 Graduation levels for accuracy and tolerance, Made from DURAN/EM-TECHCOLOR Brand
Batch certificate shall be for Measuring Cylinder Class ‘A’ only (Cat. No. 22401..)
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
224000 60 10 B 10 2 1020.00
224010 70 25 B 14 2 1140.00
224010 75 50 B 14 2 1375.00
224020 80 100 B 19 2 1580.00
224030 86 250 B 24 2 2245.00
224050 90 500 B 34 2 2905.00
224050 93 1000 B 34 1 3615.00
224050 94 2000 B 34 1 5775.00

Desiccators, Plain, Clear Glass, RIVIERA

Cat Max. Overall Qty. Per Maximum

I. D. Height Pack Price
No. mm mm Pcs Rs/Pc
74300 46 120 180 1 3685.00
74300 57 160 230 1 3970.00
74300 61 210 300 1 4530.00
74300 66 240 340 1 5935.00
74300 69 300 420 1 7260.00

Desiccators, with Plane Flanges, without Junction, with Knobbed Lid, DURAN

Cat DN Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
24781 46 100 187 1 11540.00
24781 57 150 252 1 12375.00
24781 61 200 309 1 14550.00
24781 66 250 357 1 18730.00
24781 69 300 433 1 20400.00

Desiccators, Vacuum, Clear Glass, RIVIERA

Cat Max. Overall Qty. Per Maximum

I. D. Height Pack Price
No. mm mm Pcs Rs/Pc
74310 46 120 227 1 6000.00
74310 57 160 285 1 7195.00
74310 61 210 347 1 7485.00
74310 66 240 381 1 10510.00
74310 69 300 467 1 16075.00

49
 ra
ie
iv
R
Desiccators, Vacuum, with Flat Flanges and NOVUS NS Junction, Outlet in Lid, with Stopcock, DURAN DIN 12491

Cat DN Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
24782 46 100 174 1 17690.00
24782 57 150 239 1 22430.00
24782 61 200 296 1 23360.00
24782 66 250 344 1 37000.00
24782 69 300 420 1 48355.00

Porcelain Plates for All Desiccators, RIVIERA

Cat DN Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
74320 46 100 1 160.00
74320 57 150 1 225.00
74320 61 200 1 320.00
74320 66 240 1 385.00
74320 69 300 1 605.00

Base for Plane and Vacuum Desiccator, DURAN DIN 12491

Cat DN Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
24770 46 100 58 1 6520.00
24770 57 150 81 1 7525.00
24770 61 200 115 1 12375.00
24770 66 250 120 1 12875.00
24770 69 300 150 1 16725.00

Lid for Plane Desiccator, DURAN

Cat DN Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
24410 46 100 75 1 6520.00
24410 57 150 98 1 8860.00
24410 61 200 107 1 9195.00
24410 66 250 122 1 9865.00
24410 69 300 150 1 11370.00

Lid for Vacuum Desiccator, DURAN DIN 12491

Cat DN Joint Height Qty. Per Maximum

Size Pack Price
No. mm Pcs Rs/Pc
24420 46 100 B 24 62 1 8195.00
24420 57 150 B 24 85 1 11710.00
24420 61 200 B 24 94 1 12040.00
24420 66 250 B 24 109 1 19225.00
24420 69 300 B 24 137 1 29930.00

50
 ra
ie
iv
R
Stopcock with PTFE Spindle for Vacuum Desiccator

Cat Joint Length Qty. Per Maximum

Size Pack Price
No. mm Pcs Rs/Pc

24799 04 B 24 124 1 5215.00

Dishes, Crystallizing, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity O. D. x Height Qty. Per Maximum

Pack Price
No. ml mm Pcs Rs/Pc

71600 44 300 95 x 55 6 413.00

71600 54 900 140 x 75 4 713.00
71600 59 2000 190 x 90 1 1198.00

Dishes, Crystallizing, with Spout, DURAN DIN 12338

Cat Capacity O. D. x Height Qty. Per Maximum

Pack Price
No. ml mm Pcs Rs/Pc

21311 44 300 95 x 55 10 530.00

21311 54 900 140 x 75 10 913.00
21311 59 2000 190 x 90 10 1586.00

Dishes, Evaporating, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Max. O. D. x Qty. Per Maximum

Height Pack Price
No. ml mm Pcs Rs/Pc
71700 41 90 80 x 45 10 378.00
71700 44 170 105 x 55 2 535.00
71700 54 600 150 x 80 2 999.00

Dishes, Evaporating, with Spout, DURAN DIN 12336

Cat Capacity Max. O. D. x Qty. Per Maximum

Height Pack Price
No. ml mm Pcs Rs/Pc
21301 41 90 80 x 45 10 703.00
21301 44 170 95 x 55 10 1015.00
21301 54 600 140 x 80 10 1712.00

Dishes, Petri, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat O. D. x Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
71500 40 50 x 17 10 143.00
71500 42 80 x 17 10 156.00
71500 48 100 x 17 10 162.00
71500 52 150 x 20 10 404.00
71500 59 200 x 20 10 847.00

51
 ra
ie
iv
R
Dishes, Petri, Unlimited Autoclavable, Bottom Dish and Lid Inside
and Outside absolutely Flat, Free of Bubbles and other Imperfections, STERIPLAN
Cat O. D. x Height Qty. Per Maximum
Pack Price
No. mm Pcs Rs/Pc

23755 40 60 x 15 10 158.00
23755 42 80 x 15 10 174.00
23755 48 100 x 20 10 180.00
23755 52 150 x 25 10 448.00
23755 59 200 x 30 10 939.00

Distilling Apparatus, with Graham Condenser, Interchangeable Joints,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Used for determination of Nitrogen in organic compounds. In this assembly digestion & distillation stages can both be
performed. Flask supplied with 24/29 and condenser supplied with 19/26 outer I/C joints.
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc

73300 05 500 1 2969.00

Distilling Apparatus, with Graham Condenser, Interchangeable Joints and Interchangeable Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Used for batch production of distilled water of high purity and other general purpose batch distillation with the facility for
addition from the I/C stoppered neck on the flat bottom flask.
Cat Capacity Condenser I/C Qty. Per Maximum
Jacket Length Joint Pack Price
No. ml mm Pcs Rs/Pc

73400 05 500 200 19/26 1 2969.00

Distilling Apparatus, with Friedrichs Condenser, Interchangeable Joints and Interchangeable Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Used for batch production of distilled water of high purity and other general purpose batch distillation for increased distillation
rates with the facility for addition from the I/C stoppered neck on the flat bottom flask.
Cat Capacity Condenser I/C Qty. Per Maximum
Jacket Length Joint Pack Price
No. ml mm Pcs Rs/Pc

73500 20 2000 350 24/29 1 3678.00

Distilling Apparatus, with Friedrichs Condenser and Interchangeable Joint,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Incorporates a special Friedrichs condenser with a vapour tube rising to the top.
Cat Capacity Condenser I/C Qty. Per Maximum
Jacket Length Joint Pack Price
No. ml mm Pcs Rs/Pc
73600 10 1000 495 34/35 1 3526.00

52
 ra
ie
iv
R
Distilling Apparatus, Dean and Stark, for Moisture Testing as per I.P. specifications,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Apparatus consists of 10 ml receiver with graduation & 19/26 outer joint with 24/29 inner joint, round bottom flask 1000 ml
with 24/29 centre joint and Liebig Condenser of 200 ml jacket length with 19/26 joint.

Cat Capacity of Qty. Per Maximum

Receiver Pack Price
No. ml Pcs Rs/Pc

73700 10 10 1 2444.00

Extraction Apparatus, Soxhlet, Complete with Allihn Condenser, with Interchangeable Joint,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Capacity Qty. Per Maximum

Flask Pack Price
No. ml ml Pcs Rs/Pc
73000 15 60 150 1 1676.00
73000 25 100 250 1 2145.00
73000 50 200 500 1 2924.00

Condensers, Allihn, only for Extraction Apparatus (Cat No. 73000)

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat I/C Qty. Per Maximum
Joint Pack Price
No. Bottom Pcs Rs/Pc
73020 15 34/35 1 675.00
73020 25 40/38 1 780.00
73020 50 50/42 1 1053.00

Extractors only, Soxhlet. with Interchangeable Joint,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Extractors are provided with a bulb to aid in siphoning action by means of a siphon tube near the top which is protected from
accidental damage by a vapour tube.
Cat Capacity I/C I/C Qty. Per Maximum
Joint Joint Pack Price
No. ml Top Bottom Pcs Rs/Pc
73010 15 60 34/35 24/29 1 888.00
73010 25 100 40/38 24/29 1 1223.00
73010 50 200 50/42 24/29 1 1547.00

FB Flask only for Extraction Apparatus,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
73030 150 150 1 142.00
73030 250 250 1 152.00
73030 500 500 1 224.00

53
 ra
ie
iv
R
Flasks, Erlenmeyer, Conical, Narrow Mouth, with Graduation
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
71400 10 10 37 15 60 10 76.00
71400 14 25 42 22 75 10 83.00
71400 17 50 51 22 90 10 83.00
71400 24 100 64 22 105 10 81.00
71400 29 150 72 28 124 10 104.00
71400 36 250 85 34 145 10 125.00
71400 44 500 105 34 180 10 175.00
71400 54 1000 131 50 220 10 300.00
71400 63 2000 166 52 280 4 530.00
71400 68 3000 187 50 310 1 1485.00
71400 73 5000 220 50 365 1 2427.00

Flasks, Erlenmeyer, Conical, Narrow Mouth, with Graduation, DURAN DIN 12380, ISO 1773

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21216 14 25 42 22 75 10 170.00
21216 17 50 51 22 90 10 165.00
21216 24 100 64 22 105 10 98.00
21990 27 150 74 28 118 10 128.00
21216 36 250 85 34 145 10 153.00
21216 44 500 105 34 180 10 211.00
21216 54 1000 131 42 220 10 362.00
21216 63 2000 166 50 280 10 630.00
21216 68 3000 187 51 310 2 1757.00
21216 73 5000 220 51 365 1 2870.00

Flasks, Erlenmeyer, Conical with PP Screw Cap, Autoclavable up to 1400C, Made from DURAN
Cat Capacity Qty. Per Maximum
Pack Price
No. ml Pcs Rs/Pc
21803 365 250 10 403.00
21803 445 500 10 491.00
21803 545 1000 10 943.00

54
 ra
ie
iv
R
Flasks, Erlenmeyer, Conical with I/C Joint, Made from DURAN

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
208010 14 25 B 14 10 268.00
208020 14 25 B 19 10 268.00
208030 14 25 B 24 10 268.00
208010 17 50 B 14 10 266.00
208020 17 50 B 19 10 266.00
208030 17 50 B 24 10 266.00
208010 24 100 B 14 10 252.00
208020 24 100 B 19 10 252.00
208030 24 100 B 24 10 252.00
208040 24 100 B 29 10 268.00
208020 36 250 B 19 10 330.00
208030 36 250 B 24 10 330.00
208040 36 250 B 29 10 340.00
208050 36 250 B 34 10 431.00
208020 44 500 B 19 4 465.00
208030 44 500 B 24 4 465.00
208040 44 500 B 29 4 465.00
208050 44 500 B 34 4 500.00
208030 54 1000 B 24 2 698.00
208040 54 1000 B 29 2 698.00
208050 54 1000 B 34 2 698.00
208030 63 2000 B 24 2 1140.00
208040 63 2000 B 29 2 1140.00
208050 63 2000 B 34 2 1140.00
Available in RIVIERA Brand — Prices on Request

Flasks, Erlenmeyer, Conical with I/C Joint and Glass Stopper, Made from DURAN

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
209010 14 25 B 14 10 364.00
209020 14 25 B 19 10 364.00
209030 14 25 B 24 10 364.00
209010 17 50 B 14 10 359.00
209020 17 50 B 19 10 359.00
209030 17 50 B 24 10 359.00
209020 24 100 B 19 10 407.00
209030 24 100 B 24 10 407.00
209030 36 250 B 24 10 442.00
209040 36 250 B 29 10 459.00
209030 44 500 B 24 4 609.00
209040 44 500 B 29 4 609.00
209030 54 1000 B 24 2 838.00
209040 54 1000 B 29 2 838.00
209030 63 2000 B 24 2 1383.00
209040 63 2000 B 29 2 1383.00
209050 63 2000 B 34 2 1397.00
Available in RIVIERA Brand — Prices on Request

55
 ra
ie
iv
R
Flasks, Iodine Determination with Glass Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Joint Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
74400 24 100 B 24 10 211.00
74400 36 250 B 24 10 267.00
74400 44 500 B 24 10 343.00
74400 54 1000 B 24 10 591.00

Flasks, Erlenmeyer, Conical, Wide Mouth,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Dia Neck Height Qty. Per Maximum
Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
71410 24 100 70 34 110 24 94.00
71410 36 250 85 50 142 6 137.00
71410 44 500 105 50 175 6 211.00
71410 54 1000 130 56 220 6 370.00

Flasks, Erlenmeyer, Conical, Wide Mouth, DIN 12385

with Graduation, DURAN

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21226 14 25 43 31 70 10 224.00
21226 17 50 51 34 85 10 218.00
21226 24 100 64 34 105 10 153.00
21226 36 250 85 50 140 10 239.00
21226 44 500 105 50 175 10 375.00
21226 54 1000 131 50 220 10 631.00
21226 63 2000 153 72 276 10 1086.00

56
 ra
ie
iv
R
DURAN BAFFLED FLASKS
Why use baffled flasks?
• Due to limited oxygen transfer, cell growth is restricted in
standard Erlenmeyer flasks.
• Larger surface of the content results in a higher possible
oxygen intake due to increased gas exchange area.
• Baffled flasks
— interrupt the laminar flow to create a turbulent flow
— increase the surface of the liquid and the gas exchange
surface
— produce a higher oxygen transfer compared to standard
Erlenmeyer flasks
Comparison of the produced microbial mass
Benefits of DURAN baffled flasks (Experiment with E.Coli bacteria)
• completely automated machine manufacturing
3.5
— reproducible geometry
3
— comparable results Microbial Mass (g/L)
2.5
• complete with membrane screw cap
2
(reproducible gas exchange)
• with retrace code (batch certificate via internet) 1.5
1
0.5
0
DURAN DURAN
Erlenmeyer Flask Baffled Flask

DURAN Erlenmeyer Flask DURAN Baffled Flask

When cultivating microorganisms Erlenmeyer flasks on an orbital shaker, the oxygen intake is frequently the
limiting factor for cell growth. The DURAN Erlenmeyer flask with four baffles on the bottom interrupts the laminar
flow to create a turbulent flow. The surface of the liquid and the gas exchange surface is increased, so that the
oxygen intake can be increaesed.

Cat Description Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
21283 36 DURAN baffled flask, GL 45 with bottom baffles, without cap 250 4 2693.00
21283 44 DURAN baffled flask, GL 45 with bottom baffles, without cap 500 4 3139.00
21283 54 DURAN baffled flask, GL 45 with bottom baffles, without cap 1000 1 4352.00
29118 28 DURAN PP Membrane Cap with a PTFE permeable foil GL 45 5 684.00
29242 28 DURAN PP Pouring Ring, Blue GL 45 10 30.00

57
 ra
ie
iv
R
Flasks, Flat Bottom, Narrow Neck,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Max. Neck Height Qty. Per Maximum

Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
73900 14 25 42 20 90 10 82.00
73900 17 50 51 26 90 10 89.00
73900 24 100 64 26 105 10 103.00
73900 29 150 75 28 132 10 116.00
73900 36 250 85 34 140 10 116.00
73900 44 500 105 34 165 10 190.00
73900 54 1000 131 42 190 10 265.00
73900 64 2000 166 50 230 6 519.00
73900 68 3000 186 50 300 1 1501.00
73900 73 5000 224 58 320 1 2418.00
73900 86 10000 279 65 360 1 5162.00

Flasks, Flat Bottom, Narrow Neck, DIN 12347, ISO 1773

with Beaded Rim, DURAN
Cat Capacity Max. Neck Height Qty. Per Maximum
Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21711 36 250 85 35 140 10 175.00
21711 44 500 105 34 171 10 267.00
21711 54 1000 131 42 200 10 376.00
21711 64 2000 166 42 250 10 820.00
21711 68 3000 185 50 250 1 2222.00
21711 73 5000 223 50 290 1 3579.00

Flasks, Pear Shape, Suitable for Rotary Evaporators with Ground Socket 29/32, DURAN

Cat Capacity Max Height Qty. Per Maximum

Dia Pack Price
No. ml mm mm Pcs Rs/Pc
24120 37 250 81 140 10 3190.00
24120 46 500 101 170 10 3559.00
24120 56 1000 126 210 10 4623.00

Flasks, Round Bottom, Narrow Neck,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Max. Neck Height Qty. Per Maximum
Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
74000 14 25 42 20 90 10 80.00
74000 17 50 51 26 95 10 87.00
74000 24 100 64 26 110 10 100.00
74000 29 150 75 28 137 10 113.00
74000 36 250 85 34 143 10 113.00
74000 44 500 105 34 168 10 185.00
74000 54 1000 131 42 200 10 259.00
74000 64 2000 166 51 240 6 498.00
74000 68 3000 190 50 305 1 1413.00
74000 73 5000 224 58 350 1 2282.00
74000 86 10000 279 65 380 1 4913.00
74000 91 20000 350 78 505 1 8919.00

58
 ra
ie
iv
R
Flasks, Round Bottom, Narrow Neck, with Beaded Rim, DURAN DIN 12347, ISO 1773
Flasks with Capacity 10000 ml and over have a Reinforced Rim

Cat Capacity Max. Neck Height Qty. Per Maximum

Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21721 36 250 85 34 144 10 141.00
21721 44 500 105 34 175 10 226.00
21721 54 1000 131 42 200 10 327.00
21721 64 2000 166 42 260 10 952.00
21721 68 3000 185 50 260 1 1896.00
21721 73 5000 223 50 305 1 3050.00
21721 86 10000 279 65 420 1 6595.00
21721 91 20000 345 76 515 1 12186.00

Flasks, Filtering, Conical Shape, with Glass Hose Connection suitable for Vacuum use,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
72100 24 100 72 24 105 10 302.00
72100 36 250 87 34 145 10 428.00
72100 44 500 107 34 175 10 521.00
72100 54 1000 138 45 230 10 790.00
72100 63 2000 168 45 275 4 1584.00
72100 73 5000 237 55 390 4 5965.00

Flasks, Filtering, Conical Shape, with Glass Hose Connection ISO 6556
suitable for Vacuum use, DURAN

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21201 24 100 65 24 100 10 1723.00
21201 36 250 85 35 155 10 1929.00
21201 44 500 105 34 185 10 2150.00
21201 54 1000 135 45 230 10 3314.00
21201 63 2000 166 60 255 1 3942.00

Flasks, Filtering, Bottle Shape, with Glass Hose Connection ISO 6556
suitable for Vacuum use, DURAN

Cat Capacity Dia Neck Height Qty. Per Maximum

Base Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21191 68 3000 170 60 295 1 10453.00
21191 73 5000 185 70 360 1 17477.00
21191 86 10000 240 70 420 1 23963.00
21191 91 20000 290 75 535 1 41813.00

59
 ra
ie
iv
R
Flasks, Distilling with Side Arm,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Flasks of capacity 250 ml onwards made from DURAN
Cat Capacity Approximate Approximate Qty. Per Maximum
O. D. x Height Neck O. D. Pack Price
No. ml mm mm Pcs Rs/Pc
22253 24 100 64 x 210 22 5 301.00
22253 25 125 68 x 214 19 5 330.00
22253 36 250 88 x 226 24 2 413.00
22253 44 500 110 x 250 28 2 535.00
22253 54 1000 130 x 305 30 1 677.00
22253 64 2000 170 x 318 40 1 1130.00

Flasks, Kjeldahl, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Max. Neck Height Qty. Per Maximum

Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
74500 44 500 100 29 340 6 589.00
74500 51 800 118 34 365 6 721.00

Flasks, Kjeldahl, with I/C Joint, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
74501 44 500 B 24 6 740.00
74501 51 800 B 24 6 816.00

Flasks, Kjeldahl, DURAN DIN 12360

Cat Capacity Max. Neck Height Qty. Per Maximum

Dia Dia Pack Price
No. ml mm mm mm Pcs Rs/Pc
21231 44 500 101 34 300 10 1207.00
21231 51 750 115 34 340 10 1499.00

Flasks, Kjeldahl, with I/C Joint, Made from DURAN

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
217030 44 500 B 24 10 1479.00
217030 51 750 B 24 10 1767.00

60
 ra
ie
iv
R
Flasks, Volumetric, with Interchangeable Glass Stopper, Accuracy as per Class ‘A’, USP, DIN EN ISO 1042
White coloured Marking, with Individual Cerificate of Performance,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Tolerance Joint Qty. Per Maximum
Size Pack Price
No. ml ±ml Pcs Rs/Pc
71022 55 5 0.02 10/19 20 801.00
71022 60 10 0.02 10/19 20 691.00
71022 65 20 0.03 10/19 20 691.00
71022 70 25 0.03 10/19 20 648.00
71022 75 50 0.05 10/19 20 648.00
71022 80 100 0.08 14/23 20 626.00
71022 85 200 0.10 14/23 12 857.00
71022 86 250 0.12 14/23 12 863.00
71022 90 500 0.15 19/26 12 1144.00
71022 93 1000 0.30 19/26 12 1663.00

Flasks, Volumetric, Class ‘A’, USP, with Ergonomic Polyethylene Stopper, Blue Graduation, DIN EN ISO 1042
USP Conformity, with USP Individual Certificate, DURAN

Cat Capacity Tolerance Joint Qty. Per Maximum

Size Pack Price
No. ml ±ml Pcs Rs/Pc
24671 0958 5 0.02 10/19 2 1155.00
24671 1054 10 0.02 10/19 2 916.00
24671 1457 25 0.03 10/19 2 858.00
24671 1757 50 0.05 12/21 2 930.00
24671 2556 100 0.08 14/23 2 923.00
24671 3252 200 0.10 14/23 2 1506.00
24671 3655 250 0.12 14/23 2 1249.00
24671 4454 500 0.20 19/26 2 1659.00
24671 5459 1000 0.30 24/29 2 2404.00
24671 6352 2000 0.50 29/32 2 4197.00

Flasks, Volumetric, Class ‘A’, USP, with Polyethylene Stopper DIN EN ISO 1042
Blue Graduation, Conformity Certified, with Batch Certificate - DURAN/EM-TECHCOLOR Brand

Cat Capacity Tolerance Joint Qty. Per Maximum

Size Pack Price
No. ml ±ml Pcs Rs/Pc
28201 5327 5 0.02 10/19 10 1050.00
28201 6127 10 0.02 10/19 10 833.00
28201 6527 20 0.03 10/19 10 833.00
28201 7027 25 0.03 10/19 10 780.00
28201 7527 50 0.05 12/21 10 845.00
28201 8027 100 0.08 12/21 10 839.00
28201 8527 200 0.10 14/23 10 1369.00
28201 8627 250 0.12 14/23 10 1135.00
28201 8927 500 0.15 19/26 10 1508.00
28201 9327 1000 0.30 24/29 1 2185.00
28201 9427 2000 0.50 29/32 1 3815.00
Available in AMBER - Price on Request

61
 NEW

Riviera Individually calibrated

Volumetric Flasks USP
Volumetric Flasks Class A
Measuring Cylinders Class A
Volumetric Pipettes Class A
CTF 342

Burettes & Automatic Burettes Class A

CTF 538

Now ACCESS your

ml A RIVIERA Volumetric Glassware certification
on your mobile phone...

ml A

ST EP 1 ST EP 2 ST EP 3 ST EP 4

Download Enter the Individual Traceability No.

Store Certificate in pdf Format
Riviera Glass - Certificates Printed on the Glassware Download the Certificate
or Print
App and Click GO

Riviera Glass - Certificates App

 ra
ie
iv
R
Flasks, Volumetric, with Interchangeable Glass Stopper, Accuracy as per Class ‘A’, DIN EN ISO 1042
Amber Stained Marking, with Individual Cerificate of Performance,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Tolerance Joint Qty. Per Maximum
Size Pack Price
No. ml ±ml Pcs Rs/Pc
71029 55 5 0.025 10/19 20 742.00
71029 60 10 0.025 10/19 20 641.00
71029 65 20 0.040 10/19 20 641.00
71029 70 25 0.040 10/19 20 597.00
71029 75 50 0.060 10/19 20 569.00
71029 80 100 0.100 14/23 20 555.00
71029 85 200 0.150 14/23 12 791.00
71029 86 250 0.150 14/23 12 799.00
71029 90 500 0.250 19/26 12 1041.00
71029 93 1000 0.400 19/26 12 1509.00

Flasks, Volumetric, with Interchangeable Glass Stopper, Accuracy as per Class ‘A’, DIN EN ISO 1042
White coloured Marking, with Individual Cerificate of Performance,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Tolerance Joint Qty. Per Maximum
Size Pack Price
No. ml ±ml Pcs Rs/Pc
71020 55 5 0.025 10/19 20 742.00
71020 60 10 0.025 10/19 20 641.00
71020 65 20 0.040 10/19 20 641.00
71020 70 25 0.040 10/19 20 597.00
71020 75 50 0.060 10/19 20 569.00
71020 80 100 0.100 14/23 20 555.00
71020 85 200 0.150 14/23 12 791.00
71020 86 250 0.150 14/23 12 799.00
71020 90 500 0.250 19/26 12 1041.00
71020 93 1000 0.400 19/26 12 1509.00

Flasks, Volumetric, Class ‘A’, with Ergonomic Stopper, Blue Graduation, DIN EN ISO 1042
with Individual Certificate and Certificate of Conformity, DURAN

Cat Capacity Tolerance Joint Qty. Per Maximum

Size Pack Price
No. ml ±ml Pcs Rs/Pc
24679 0957 5 0.040 10/19 2 1052.00
24679 1053 10 0.040 10/19 2 834.00
24679 1259 20 0.040 10/19 2 834.00
24679 1456 25 0.040 10/19 2 777.00
24679 1756 50 0.060 12/21 2 777.00
24679 2452 100 0.100 12/21 2 769.00
24679 3251 200 0.150 14/23 2 1252.00
24679 3654 250 0.150 14/23 2 1038.00
24679 4453 500 0.250 19/26 2 1380.00
24679 5458 1000 0.400 24/29 2 2002.00
24679 6351 2000 0.600 29/32 2 3496.00

63
 ra
ie
iv
R
Flasks, Volumetric, Class ‘A’, with Polyethylene Stopper DIN EN ISO 1042
Blue Graduation, Conformity Certified, with Batch Certificate - DURAN/EM-TECHCOLOR Brand

Cat Capacity Tolerance Joint Qty. Per Maximum

Size Pack Price
No. ml ±ml Pcs Rs/Pc
28201 53 5 0.040 10/19 10 956.00
28201 61 10 0.040 10/19 10 758.00
28201 65 20 0.040 10/19 10 758.00
28201 70 25 0.040 10/19 10 706.00
28201 75 50 0.060 12/21 10 706.00
28201 80 100 0.100 12/21 10 699.00
28201 85 200 0.150 14/23 10 1138.00
28201 86 250 0.150 14/23 10 944.00
28201 90 500 0.250 19//26 10 1255.00
28201 93 1000 0.400 24/29 1 1820.00
28201 94 2000 0.600 29/32 1 3178.00

Flasks, Volumetric, Class ‘A’, with Polyethylene Stopper, AMBER, DIN EN ISO 1042
Conformity Certified, with Batch Certificate - DURAN/EM-TECHCOLOR Brand
Cat Capacity Tolerance Joint Qty. Per Maximum
Size Pack Price
No. ml ±ml Pcs Rs/Pc
26401 53 5 0.040 10/19 10 1272.00
26401 61 10 0.040 10/19 10 1057.00
26401 65 20 0.040 10/19 10 975.00
26401 70 25 0.040 10/19 10 1063.00
26401 75 50 0.060 12/21 10 1072.00
26401 80 100 0.100 12/21 10 1195.00
26401 85 200 0.150 14/23 10 1684.00
26401 86 250 0.150 14/23 10 1559.00
26401 90 500 0.250 19/26 10 2074.00
26401 93 1000 0.400 24/29 1 3202.00

Flasks, Volumetric, Trapezoidal Shape, Class ‘A’, with Polyethylene Stopper DIN EN ISO 1042
Blue Graduation, Conformity Certified, with Batch Certificate - DURAN/EM-TECHCOLOR Brand
Cat Capacity Tolerance Joint Qty. Per Maximum
Size Pack Price
No. ml ±ml Pcs Rs/Pc
29601 33 1 0.025 7/19 2 1481.00
29601 40 2 0.025 7/16 2 1505.00
29601 53 5 0.040 10/19 2 1544.00
29601 61 10 0.040 10/19 2 1586.00
29601 65 20 0.040 10/19 2 1637.00
29601 70 25 0.040 10/19 2 1698.00
29601 75 50 0.060 12/21 2 1752.00

64
 ra
ie
iv
R
Flasks, Volumetric, with I/C Glass Stopper, Amber Stained Marking, DIN EN ISO 1042
Accuracy as per Class ‘B’, Made from Heat Resistant,
Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Capacity Stopper Qty. Per Maximum
Tolerance Size Pack Price
No. ml ml Pcs Rs/Pc
71019 55 5 0.05 10/19 20 230.00
71019 60 10 0.05 10/19 20 219.00
71019 65 20 0.08 10/19 20 219.00
71019 70 25 0.08 10/19 20 212.00
71019 75 50 0.12 10/19 20 237.00
71019 80 100 0.20 14/23 20 270.00
71019 85 200 0.30 14/23 12 306.00
71019 86 250 0.30 14/23 12 317.00
71019 90 500 0.50 19/26 12 424.00
71019 93 1000 0.80 19/26 12 634.00

Flasks, Volumetric, with I/C Glass Stopper, White coloured Marking DIN EN ISO 1042
Accuracy as per Class ‘B’, Made from Heat Resistant,
Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Capacity Stopper Qty. Per Maximum
Tolerance Size Pack Price
No. ml ml Pcs Rs/Pc
71000 55 5 0.05 10/19 20 230.00
71000 60 10 0.05 10/19 20 219.00
71000 65 20 0.08 10/19 20 219.00
71000 70 25 0.08 10/19 20 212.00
71000 75 50 0.12 10/19 20 237.00
71000 80 100 0.20 14/23 20 270.00
71000 85 200 0.30 14/23 12 306.00
71000 86 250 0.30 14/23 12 317.00
71000 90 500 0.50 19/26 12 424.00
71000 93 1000 0.80 19/26 12 634.00

Flasks, Volumetric, with I/C Glass Stopper, AMBER, Accuracy as per Class ‘B’, DIN EN ISO 1042
White coloured Marking, Made from Heat Resistant,
Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Capacity Stopper Qty. Per Maximum
Tolerance Size Pack Price
No. ml ml Pcs Rs/Pc
71010 55 5 0.05 10/19 20 352.00
71010 60 10 0.05 10/19 20 334.00
71010 65 20 0.08 10/19 20 334.00
71010 70 25 0.08 10/19 20 320.00
71010 75 50 0.12 10/19 20 334.00
71010 80 100 0.20 14/23 20 372.00
71010 85 200 0.30 14/23 12 421.00
71010 86 250 0.30 14/23 12 434.00
71010 90 500 0.50 19/26 12 622.00
71010 93 1000 0.80 19/26 12 973.00

65
 ra
ie
iv
R
Poly Stoppers for Volumetric Flasks, Class ‘A’, EM-TECHCOLOR

Cat Joint Suitable for Qty. Per Maximum

Size Flask capacity Pack Price
No. ml Pcs Rs/Pc
89002 60 10 / 19 5 to 25 10 84.00
89002 65 12 / 21 50 to 100 10 103.00
89002 70 14 / 23 200 to 250 10 115.00
89002 75 19 / 26 500 10 115.00
89002 80 24 / 29 1000 10 138.00
89002 86 29 / 32 2000 10 211.00

Funnels, Plain, 600 Angle, Long Stem,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Diameter Qty. Per Maximum
Pack Price
No. mm Pcs Rs/Pc
73100 33 50 6 98.00
73100 38 65 6 119.00
73100 41 75 6 124.00
73100 46 100 2 169.00

Funnels, Powder, Short Stem,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Diameter Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
73100 47 125 2 351.00
73100 48 150 2 377.00
73100 50 200 2 1013.00

Funnels, Separating, Pear Shape, with Rotaflow Stopcock & I/C Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
21114 18 60 14/23 2 897.00

66
 ra
ie
iv
R
Funnels, Separating, Pear Shape, with Rotaflow Stopcock & I/C Stopper,
Made from DURAN Glass
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
21114 24 100 19/26 2 1131.00
21114 36 250 19/26 2 1299.00
21114 44 500 24/29 1 1693.00
21114 54 1000 29/32 1 2108.00

Funnels, Separating, Pear Shape, with Glass Stopcock & I/C Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Stopper Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
21115 18 60 14/23 2 1003.00

Funnels, Separating, Pear Shape, with Glass Stopcock & I/C Stopper,
Made from DURAN Glass

Cat Capacity Stopper Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc
21115 24 100 19/26 2 1081.00
21115 36 250 19/26 2 1217.00
21115 44 500 24/29 1 1583.00
21115 54 1000 29/32 1 2054.00

Funnels, Separating, Globe Shape, with Rotaflow Stopcock & I/C Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc

21113 25 125 19/26 2 1077.00

Funnels, Separating, Globe Shape, with Rotaflow Stopcock & I/C Stopper,
Made from DURAN Glass
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
21113 36 250 19/26 2 1259.00
21113 44 500 24/29 1 1587.00
21113 54 1000 29/32 1 2007.00
21113 63 2000 29/32 1 3675.00

67
 ra
ie
iv
R
Funnels, Separating, Globe Shape, with Glass Stopcock & I/C Stopper,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
21112 25 125 19/26 2 1077.00

Funnels, Separating, Globe Shape, with Glass Stopcock & I/C Stopper,
Made from DURAN Glass
Cat Capacity Stopper Qty. Per Maximum
Size Pack Price
No. ml Pcs Rs/Pc
21112 36 250 19/26 2 1259.00
21112 44 500 24/29 1 1587.00
21112 54 1000 29/32 1 2007.00
21112 63 2000 29/32 1 3675.00

Filter Crucibles with Sintered Disc, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Porosity Qty. Per Maximum

Pack Price
No. ml Grade Pcs Rs/Pc
72000 151 15 G1 10 310.00
72000 152 15 G2 10 310.00
72000 153 15 G3 10 310.00
72000 154 15 G4 10 310.00
72000 301 30 G1 10 429.00
72000 302 30 G2 10 429.00
72000 303 30 G3 10 429.00
72000 304 30 G4 10 429.00
72000 501 50 G1 10 483.00
72000 502 50 G2 10 483.00
72000 503 50 G3 10 483.00
72000 504 50 G4 10 483.00

Filter Crucibles with Sintered Disc, DURAN

Cat Capacity Porosity Qty. Per Maximum

Pack Price
No. ml Grade Pcs Rs/Pc
25851 11 15 G1 10 2060.00
25851 12 15 G2 10 2060.00
25851 13 15 G3 10 2060.00
25851 14 15 G4 10 2322.00
25851 21 30 G1 10 1752.00
25851 22 30 G2 10 1752.00
25851 23 30 G3 10 1752.00
25851 24 30 G4 10 1840.00
25851 31 50 G1 10 2456.00
25851 32 50 G2 10 2456.00
25851 33 50 G3 10 2456.00
25851 34 50 G4 10 2542.00

68
 ra
ie
iv
R
Funnels, Buchner Type, with Sintered Disc, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Porosity Qty. Per Maximum

Pack Price
No. ml Grade Pcs Rs/Pc

72010 0351 35 G1 1 457.00

72010 0352 35 G2 1 457.00
72010 0353 35 G3 1 457.00
72010 0354 35 G4 1 457.00
72010 0801 80 G1 1 901.00
72010 0802 80 G2 1 901.00
72010 0803 80 G3 1 901.00
72010 0804 80 G4 1 901.00
72010 2001 200 G1 1 1437.00
72010 2002 200 G2 1 1437.00
72010 2003 200 G3 1 1437.00
72010 2004 200 G4 1 1437.00

Funnels, Buchner Type, with Sintered Disc, DURAN

Cat Capacity Porosity Qty. Per Maximum

Pack Price
No. ml Grade Pcs Rs/Pc

25852 01 50 G1 1 3881.00
25852 02 50 G2 1 3881.00
25852 03 50 G3 1 3881.00
25852 04 50 G4 1 4047.00
25852 11 75 G1 1 4129.00
25852 12 75 G2 1 4129.00
25852 13 75 G3 1 4129.00
25852 14 75 G4 1 4542.00
25852 21 125 G1 1 5451.00
25852 22 125 G2 1 5451.00
25852 23 125 G3 1 5451.00
25852 24 125 G4 1 5780.00
25852 31 500 G1 1 11744.00
25852 32 500 G2 1 11744.00
25852 33 500 G3 1 11744.00
25852 34 500 G4 1 12709.00
25852 41 1000 G1 1 17443.00
25852 42 1000 G2 1 17443.00
25852 43 1000 G3 1 17443.00
25852 44 1000 G4 1 17880.00

Pipeline Filters, with Sintered Disc, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Porosity Qty. Per Maximum

Pack Price
No. ml Grade Pcs Rs/Pc

72020 901 90 G1 1 3959.00

72020 902 90 G2 1 3959.00
72020 903 90 G3 1 3959.00
72020 904 90 G4 1 3959.00

69
 R era
ra
ie
i
iv
iv
R
SINTERED GLASSWARE, DURAN

Porosity Grades

Porosity New Identification Nominal Max. Fields of

Grade Mark Pore Size applications,
ISO 4793 µm examples

1 P 160 100 - 160 Coarse filtration. filtration of coarse precipitates, gas distribution in liquids. Liquid distribution,
coarse gas filtration. Extraction apparatus for coarse grain materials. Loose filter layer
subtrates for gelatinous precipitates.
2 P 100 40 - 100 Preparative fine filtration. Preparative work with crystalline precipitates. Mercury filtration.
3 P 40 16 - 40 Analytical filtration. Analytical work with medium-line precipitates. Preparative work with fine
precipitates. Filtration in cellulose chemistry, fine gas filtration. Extraction apparatus for fine-
grained materials.
4 P 16 10 - 16 Analytical filtration. Analytical work with very fine precipitates (e. g. BaSO4, Cu2O). Preparative
work with precipitates of appropriate fineness. Non-return and stop valves for Mercury.

To determine possible application of glass filter discs and apparatus, it is with a small brush.
necessary to know not only the porosity, but also the flow rates of liquids (Do not remove filter medium with sharp objects.)
and gases. The data applies to filter discs of 30 mm diameter. the flow rates
for other disc diameters can be calculated by multiplying the value of a 30 Where some of the precipitate has entered the pores, backflushing is
mm disc by the conversion factor as shown in the table below. necessary. In the case of porosites 0 to 2 this can be done simply by using
a water tap, connecting it with the rubber tubing to the stem of sintered piece
Filter disc diameter mm 10 20 30 40 60 90 120 150 175
Conversion factor 0.13 0.55 1.0 1.5 2.5 4.3 6.8 9.7 15.0
and allowing water to run backwards through the filter disc. The water pressure
must not exceed 1kp/cm2.
CARE AND CLEANING
For porosites 3, 4 and 5 the precipitate is flushed or wiped off the disc, and
Temperature Change, Drying and Sterilization : the water is sucked through in the opposite direction to filtration.
Please take a note of the following tips. They ensure that no inner stress Filters clogged by dirt and dust during gas filtration can be restored by
occurs between the vessel and the filter discs, which can lead to the filter treatment with a warm detergent solution followed by blowing through clean
breaking. air from the clean side of the filter. Dirt particles are brought to the surface by
1. Avoid sudden changes in temperature and unequal heating. Sintered the foam and removed by rinsing with water.
glass filter funnels, pipe line filter tubes and other sintered glass apparatus
with disc diameters exceeding 20 mm, which are to be dried or sterilized, Chemical Cleaning
should be placed in cold ovens or sterilizers.
If, after mechanical cleaning, some of the pores remain clogged, or if it is
2. The speed of heating and cooling should not exceed 80C/min.
desirable to make sure that no residue from the previous work remains
3. Before filtering hot substances bring the filter unit slowly up to temperature
before filtering a new substance, then thorough chemical cleaning is
in the hot cabinet.
required. The choice of solvent obviously depends on the nature of the
4. Wet filter units should be heated slowly up to 800C and dried for one hour
contamination.
before increasing the temperature.
For example :
Filtration apparatus should, whenever possible, stand on its rim (stem Barium sulphate - hot conc, sulphuric acid (1000C)
upwards) in the oven or sterilizer. A perforated support base is advantageous Silver chloride - hot ammonia liquor
since it allows air convection between the inside of the vessel and the body Red copper oxide - hot hydrochloric acid & potassium chloride
of the oven. If angled position of the filtration apparatus is unavoidable (pipeline Mercury residue - hot, conc. nitric acid
filter tubes), then any point of support which is near to the filter seal position Mercury sulphide - hot aqua regia
should be protected against premature heating. This is done by using an Albumen - hot ammonia liquor or hydrochloric acid
underlay of heat-insulating material. Grease, oil - carbon tetrachloride
The apparatus should remain in the oven or sterilizer during cooling. Due to Other organic substances - hot, conc. sulphuric acid with an addition
the thermal inertia of this type of oven, the cooling time is adequate. of nitric acid, sodium nitrate or potassium
dichromate
Cleaning new Sintered Glassware : Animal charcoal - careful heating with a mixture of 5 volumes
of conc. sulphuric acid + 1 volume of
Before using sintered glass filter apparatus for the first time, hot hydrochloric
conc. nitric acid to about 200 0C
acid followed by several rinses of distilled water should be sucked through
Prolonged rinsing of water must obviously follow.
the filter disc under a good vacuum. This removes dust particles and powdered
glass. It is important each successive water rinse be started only after the For biochemical work cleaning with dichromatic sulphuric acid should be
preceding one is completely flushed through. This so-called “tear through” avoided, since trivalent chromium compounds, present or newly formed
method must only be used for cleaning filters. It should never be adopted for by reduction, are absorbed on the surface of the filter disc. When they are
preparative or analytical filtration. released during susequent use, biological substances can be seriously
damaged. This danger is eliminated by using sulphuric acid with a nitrate
Mechanical Cleaning or perchlorate addition. Only easily soluble reduction products are formed
Sintered glass filters should always be cleaned immediately after use. which can be completely removed by re-washing with water. Since hot,
conc. phosphoric acid and hot alkaline solutions attack the glass surface,
If no precipitate has entered the pores, surface rinsing under the tap or with
they are unsuitable as cleaning agents.
a wash bottle is often sufficient. The filter disc surface can be wiped clean

70
 ra
ie
iv
R
CERAN, Protective laboratory plates : aggresive
CERAN protection plates solve a problem in the laboratory which is unavoidable. Even highly aggresive media can do no damage
could not be avoided previously when using conventional to the CERAN laboratory protective plate.
asbestos mats. On heating, it does not release substances which High temperature resistance
are harmful to health. Apart from this main advantage of CERAN Application ranging from -2000C to +7000C.
glass ceramic laboratory protective plate compared with A particular advantage of CERAN laboratory protective plate is
asbestos, the use of which has been restricted or prohibited in their high continuous operation temperature.
the mean time in some countries, there are further convincing Durability at
reasons for replacing the asbestos / wire mesh in all laboratories 7000C - 6000 h
by CERAN protective plates. 7500C - 750 h
Saving in energy and time 8000C - 100 h
The good permeability of CERAN protective plates for infrared Even when the hot plate is quenched with cold water, there is
radiation results in heat energy transfer to the material to be no risk of fracture, since the resistance to temperature shock is
heated with low losses. This saves 20% of time and energy. In greater than 6500C. In order to avoid overheating, care must be
addition, there is room for several items on the flat square area. taken that the above mentioned limits are not exceeded when
Chemically resistant working with a bunsen burner. CERAN protective laboratory plate
When working in the laboratory, boiling over and spilling of retains its shape and flatness and does not age.

Laboratory Protection Plates, Made from Glass Ceramic, CERAN

Supply will not include Metal Stand
Cat Plate Qty. Per Maximum
Dimensions Pack Price
No. mm Pcs Rs/Pc
23821 53 135 x 135 1 2477.00
23821 57 155 x 155 1 2641.00
23821 58 175 x 175 1 3073.00

Bell Jars with Knob, Clear Glass, RIVIERA

Cat Height x Dia Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
71800 180 180 x 120 1 599.00
71800 200 200 x 150 1 782.00
71800 250 250 x 150 1 1198.00
71800 300 300 x 200 1 3194.00

Bell Jars with Knob, DURAN

Cat Height x Dia Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
24460 59 250 x 185 1 17228.00
24460 66 255 x 260 1 22335.00
24460 69 300 x 315 1 33056.00

Museum Jars with Ground-in Glass Plate, DURAN

Cat HxIxB Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
21363 05 100 x 060 x 050 10 6379.00
21363 11 120 x 100 x 050 1 6917.00
21363 13 130 x 130 x 050 1 9594.00
21363 19 150 x 150 x 050 1 10434.00
21363 47 210 x 210 x 100 1 18903.00
21363 58 250 x 250 x 140 1 31074.00

71
 ra
ie
iv
R
EM - TECHCOLOR PIPETTES

Pipettes are used for accurate measurements and transfer of liquids. and half times that of Class ‘AS’. This means that they are better than
Volumetric pipettes will only deliver specific quantities. Graduated required by ISO and DIN. By specifying a Class ‘AS’ within the frame
pipettes allow take - up of different liquid volumes and delivery of the work or their 15th modifications order, the Federal German weights
same or different quantities. Graduated and volumetric pipettes are and measures authorities have recognised that an overwhelming
of EM - TECHCOLOR brand. They are calibrated to deliver (“Ex”) at por tion of volumetric measurements, par ticularly in clinical
the reference temperature of 200C. In the case of calibrated pipettes laboratories is carried out on water or on dilute aqueous solutions.
and Class ‘AS’ pipettes, the tolerences on volume content corresponds Thus, apparatus with the same accuracy limits, but with run-out
to the accuracy limits of ISO and DIN standards.The accuracy limits time considerably shorter than hitherto demanded, are now admitted
for EM - TECHCOLOR Class ‘B’ type are about one for calibration.

Tolerances for Graduated measuring Pipettes calibrated to deliver

Capacity Accuracy Limits Class ‘AS Accuracy Limits

ml suitable for official calibration Class ‘B’

ISO 835 ISO 835 EM-TECHCOLOR

DIN 12697 DIN 12695
± ml ± ml ± ml

0.11 - - 0.0015
0.21 - - 0.0030
1 0.007 0.01 0.0100
2 0.010 0.02 0.0150
5 0.030 0.05 0.0450
10 0.050 0.10 0.0750
25 0.100 0.20 0.1500

1 Non - DIN, Non - ISO size, Graduated Pipettes 0.1 and 0.2 ml are calibrated to contain (“In”)

Tolerances for Volumetric Pipettes calibrated to deliver

Capacity Accuracy Limits Class ‘AS’ Accuracy Limits

ml suitable for official calibration Class ‘B’

ISO 648 EM-TECHCOLOR

DIN 12691 DIN 12690
± ml ± ml ± ml

5 0.015 0.03 0.0230

10 0.020 0.04 0.0300
20 0.030 0.06 0.0450
25 0.030 0.06 0.0450
50 0.050 0.10 0.0750

Pipettes, Graduated, Clear Glass, Short - Line, Graduated to Tip,

Amber Stain Graduation, (Serological type), Class ‘B’, RIVIERA Brand

Cat Capacity Graduation Tolerance Total Qty. Per Maximum

Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc

72600 14 0.10 0.01 0.01 320 10 135.00

72600 21 0.20 0.02 0.01 320 10 130.00
72600 29 0.50 0.05 0.01 320 10 127.00
72600 33 1.00 0.01 0.01 350 10 123.00
72600 41 2.00 0.02 0.02 350 10 135.00
72600 53 5.00 0.05 0.05 350 10 150.00
72600 60 10.0 0.10 0.10 350 10 156.00
72600 70 25.0 0.20 0.20 470 10 245.00

72
 CERTIFICATE

ISO 9001:2015
DEKRA Certification GmbH hereby certifies that the organization

Hirschmann Laborgeräte GmbH & Co. KG

Scope of certification:
Development, Production and Distribution of Laboratory Equipment and Laboratory Consumables.

Certified location:
Hauptstraße 7-15, 74246 Eberstadt, Germany

has established and maintains a quality management system according to the above mentioned
standard. The conformity was adduced with audit report no. 51429-Z3-00.
Certificate registration no.: 91114758/2 Certificate valid from: 2020-11-27
Validity of previous certificate: 2020-11-26 Certificate valid to: 2023-11-26

Language translation

Dr. Gerhard Nagel

DEKRA Certification GmbH, Stuttgart, 2020-11-19

DEKRA Certification GmbH * Handwerkstraße 15 * D-70565 Stuttgart * www.dekra.de/audits

page 1 of 1
 CERTIFICATE

EN ISO 13485:2016
DEKRA Certification GmbH hereby certifies that the organization

Hirschmann Laborgeräte GmbH & Co. KG

Scope of certification:
Design, development, production and distribution of glass products and volumetric measuring
apparatus for use in in-vitro diagnostic

Certified location:
Hauptstraße 7-15, 74246 Eberstadt, Germany

has established and maintains a quality management system according to the above mentioned
standard. The conformity was adduced with audit report no. 51429-Z3-00.
Certificate registration no.: 51429-14-01 Certificate valid from: 2020-11-27
Validity of previous certificate: 2020-11-26 Certificate valid to: 2023-11-26

Ruth Delbeck-Bayer
DEKRA Certification GmbH, Stuttgart, 2020-11-19

DEKRA Certification GmbH * Handwerkstraße 15 * D-70565 Stuttgart * www.dekra.de/audits

page 1 of 1
 ra
ie
iv
R
Recognition of DAkkS under Indian Regulation of NABL Arrangement (MRA), (often referred to as ILAC Arrangement) is to
create an international framework to support international trade
Hirschmann Laborgerate GmbH &Co.KG has been given Accreditation
through the removal of technical barriers.
by DAkkS (Deutsche Akkreditierungsstelle GmbH) as competent to
carry out calibrations. This accreditation implies that Hirschmann has
the right to issue internationally recognized certificates for volumetric
measuring instruments.Therefore, the tested quality of each product
is not only documented but the certification represents the rigorous
testing procedures as well as the excellence of the quality management
systems. The DAkkS calibration certificate includes all measured
values and measuring uncertainty of the tested device based on
international norms. DAkkS is signatory to the Multilateral Agreements
of EA, ILAC and IAF for Mutual Recognition.

DAkkS and NABL are connected and mutually recognized through

the ILAC Organization. ILAC (International Laboratory Accreditation
Cooperation) is the international organization for accreditation bodies
operating in accordance with ISO\IEC 17011and involved in the
accreditation of Conformity Assessment Bodies including Calibration
In many economies there is an accreditation body recognized by
Laboratories (using ISO/IEC 17025), Testing Laboratories (using ISO/ government and industry ( in India NABL) to carry out the assessment
IEC 17025), Medical Testing Laboratories (using ISO 15189) and
and verification against international standards of testing, calibration,
Inspection Bodies (using ISO/IEC 17020). inspection and certification activities in both the private and public
Accreditation allows you to make an informed decision when selecting sectors. ILAC is an organization that counts as its members laboratory
an organization to carry out your testing, calibration, or inspection accreditation bodies, regional organizations and stakeholders
activities, as it demonstrates competence, impartiality and capability representing over 110 economies. The ILAC MRA allows making use
of that organization. As a result, accreditation helps to underpin the of a global network of testing and calibration laboratories and
credibility, safety and performance of goods and services. inspection bodies that have been accredited to provide accurate and
reliable results. The ILAC MRA acts as an internationally recognized
Accreditation bodies around the world, which have been evaluated
‘stamp of approval’ to demonstrate compliance against agreed
by peers as competent, have signed an arrangement that enhances
standards and requirements. Accreditation and the ILAC MRA help
the acceptance of products and services across national borders.
regulators meet their own legislated responsibilities by providing a
The purpose of this arrangement, the ILAC Mutual Recognition
globally recognized system to accept accredited test and inspection
reports.

77
 ra
ie
iv
R
Pipettes, Graduated, Clear Glass, Short - Line, Graduated to Tip, DIN EN ISO 835
Amber Stain Graduation, (Serological type), Class ‘B’, EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Total Qty. Per Maximum

Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc

10001 33 1 0.01 0.010 360 12 136.00

10001 35 1 0.10 0.010 360 12 126.00
10001 41 2 0.02 0.015 360 12 150.00
10001 42 2 0.10 0.015 360 12 142.00
10001 53 5 0.05 0.045 360 12 167.00
10001 54 5 0.10 0.045 360 12 159.00
10001 60 10 0.10 0.075 360 12 173.00
10001 70 25 0.10 0.150 450 6 268.00

Precision Graduated Pipettes, Clear Glass, Short-Line, Graduated to Tip, DIN EN ISO 835
Amber Stain Graduation, (Serological type), Class ‘B’, EM-TECHCOLOR Brand
Cat Capacity Graduation Tolerance Total Qty. Per Maximum
Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc
10001 29 0.5 0.010 0.0075 360 12 346.00

Pipettes, Graduated, Clear Glass, Main Point Ring Graduation, Graduated to Tip, DIN EN ISO 835
Amber Stain Graduation, (Serological type), Class ‘AS’, Conformity Certified,
with Batch Certificate, Calibrated at 3 Graduation levels for accuracy and tolerance, EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Total Qty. Per Maximum

Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc
11001 33 1 0.01 0.007 360 12 419.00
11001 35 1 0.10 0.007 360 12 386.00
11001 41 2 0.02 0.010 360 12 437.00
11001 42 2 0.10 0.010 360 12 404.00
11001 53 5 0.05 0.030 360 12 513.00
11001 54 5 0.10 0.030 360 12 476.00
11001 60 10 0.10 0.050 360 12 546.00
11001 70 25 0.10 0.100 450 6 640.00

Pipettes, Graduated, Clear Glass, Main Point Blue Ring Graduation, Graduated to Tip, DIN EN ISO 835
Schellbach, (Serological type), Class ‘AS’, Conformity Certified,
with Batch Certificate, Calibrated at 3 Graduation levels for accuracy and tolerance, EM-TECHCOLOR Brand
Cat Capacity Graduation Tolerance Total Qty. Per Maximum
Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc
11101 33 1 0.01 0.007 360 12 461.00
11101 41 2 0.02 0.010 360 12 482.00
11101 53 5 0.05 0.030 360 12 564.00
11101 54 5 0.10 0.030 360 12 521.00
11101 60 10 0.10 0.050 360 12 599.00
11101 70 25 0.10 0.100 450 6 705.00

78
 ra
ie
iv
R
Pipettes, Graduated, Clear Glass, Short-Line, Graduated, Capacity Mark above shoulder, DIN EN ISO 835
Amber Stain Graduation, (Mohr type), Class ‘B’, EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Total Qty. Per Maximum

Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc

10002 33 1 0.01 0.010 360 12 136.00

10002 35 1 0.10 0.010 360 12 126.00
10002 41 2 0.02 0.015 360 12 150.00
10002 42 2 0.10 0.015 360 12 142.00
10002 53 5 0.05 0.045 360 12 167.00
10002 54 5 0.10 0.045 360 12 159.00
10002 60 10 0.10 0.075 360 12 173.00
10002 70 25 0.10 0.150 450 6 268.00

Pipettes, Graduated, Clear Glass, Main Point Ring Graduation, Graduated Capacity DIN EN ISO 835
Mark above Shoulder, Amber Stain Graduation, (Mohr type), Class ‘AS’, Conformity Certified,
with Batch Certificate,Calibrated at 3 Graduation levels for accuracy and tolerance, EM-TECHCOLOR Brand

Cat Capacity Graduation Tolerance Total Qty. Per Maximum

Division Length Pack Price
No. ml ml ±ml ±5mm Pcs Rs/Pc
11002 33 1 0.01 0.007 360 12 419.00
11002 35 1 0.10 0.007 360 12 386.00
11002 41 2 0.02 0.010 360 12 437.00
11002 42 2 0.10 0.010 360 12 404.00
11002 53 5 0.05 0.030 360 12 513.00
11002 54 5 0.10 0.030 360 12 476.00
11002 60 10 0.10 0.050 360 12 546.00
11002 70 25 0.10 0.100 450 6 640.00

Pipette, Transfer, Volumetric, Accuracy as per Class ‘A’, Made from Heat Resistant, IS 1117: 1975
Low Expansion Borosilicate Glass, with Individual Certificate of Performance, RIVIERA

Cat Capacity Tolerance Qty. Per Maximum

Pack Price
No. ml ±ml Pcs Rs/Pc
72710 33 1 0.007 25 276.00
72710 40 2 0.010 25 297.00
72710 55 5 0.015 25 316.00
72710 60 10 0.020 25 371.00
72710 65 20 0.030 25 482.00
72710 70 25 0.030 25 516.00
72710 75 50 0.050 12 578.00
72710 80 100 0.080 6 880.00

79
 ra
ie
iv
R
Pipettes, Volumetric, Clear Glass, One Mark, Blue Inscription, Class ‘AS’, DIN EN ISO 835
Conformity Certified with Batch Certificate, DWK

Cat Capacity Tolerance Total Qty. Per Maximum

Length Pack Price
No. ml ±ml ±10mm Pcs Rs/Pc

23339 0105 1 0.008 325 12 311.00

23339 0208 2 0.010 350 12 319.00
23339 0302 3 0.010 350 6 355.00
23339 0405 4 0.015 410 6 379.00
23339 0508 5 0.015 410 6 382.00
23339 0602 6 0.015 410 6 655.00
23339 0705 7 0.015 410 6 655.00
23339 0808 8 0.020 450 6 800.00
23339 0902 9 0.020 450 6 800.00
23339 1007 10 0.020 450 6 432.00
23339 1504 15 0.030 520 6 553.00
23339 2003 20 0.030 520 6 558.00
23339 2509 25 0.030 530 6 599.00
23339 5009 50 0.050 550 6 726.00

Pipettes, Volumetric, Clear Glass, One Mark, Amber Stain Graduation, Class ‘AS’, DIN EN ISO 648
Conformity Certified with Batch Certificate, EM-TECHCOLOR Brand

Cat Capacity Tolerance Total Qty. Per Maximum

Length Pack Price
No. ml ±ml ±10mm Pcs Rs/Pc

13401 33 1 0.008 325 12 311.00

13401 40 2 0.010 350 12 319.00
13401 48 3 0.010 350 6 355.00
13401 50 4 0.015 410 6 379.00
13401 55 5 0.015 410 6 382.00
13401 56 6 0.015 410 6 655.00
13401 57 7 0.015 410 6 655.00
13401 58 8 0.020 450 6 800.00
13401 59 9 0.020 450 6 800.00
13401 60 10 0.020 450 6 432.00
13401 64 15 0.030 520 6 553.00
13401 65 20 0.030 520 6 558.00
13401 70 25 0.030 530 6 599.00
13401 75 50 0.050 550 6 726.00

Pipettes, Volumetric, Clear Glass, Two Marks, Amber Stain Graduation, Class ‘AS’, DIN EN ISO 648
Conformity Certified with Batch Certificate, EM-TECHCOLOR Brand

Cat Capacity Tolerance Total Qty. Per Maximum

Length Pack Price
No. ml ±ml ±10mm Pcs Rs/Pc
13402 33 1 0.008 325 12 540.00
13402 40 2 0.010 350 12 759.00
13402 48 3 0.010 350 6 780.00
13402 55 5 0.015 410 6 850.00
13402 60 10 0.020 450 6 923.00
13402 64 15 0.030 520 6 1161.00
13402 65 20 0.030 520 6 1189.00
13402 70 25 0.030 530 6 1189.00
13402 75 50 0.050 550 6 1516.00

80
 ra
ie
iv
R
Pipettes, Transfer, Volumetric, Accuracy as per Class ‘B’, IS 1117 : 1975
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Tolerance Qty. Per Maximum

Pack Price
No. ml ±ml Pcs Rs/Pc
72700 33 1 0.015 25 120.00
72700 40 2 0.020 25 120.00
72700 55 5 0.030 25 125.00
72700 60 10 0.040 25 151.00
72700 65 20 0.060 25 179.00
72700 70 25 0.060 25 187.00
72700 75 50 0.100 12 221.00
72700 80 100 0.160 6 338.00

Culture Tubes, Round Bottom, with DIN Thread with Screw-Cap made of PP
and Rubber Gasket, (Suitable for food use) Sterilizable at 1 bar 1210C, AR-GLAS

Cat O. D. x DIN Wall Qty. Per Maximum

Length Thread Thickness Pack Price
No. mm GL mm Pcs Rs/Pc
23175 115 12 x 100 14 1 100 66.00
23175 145 16 x 100 18 1 100 73.00
23175 215 16 x 160 18 1 100 86.00
23175 235 18 x 180 18 1 100 111.00
Supplies will be without any brand mark on the Culture Tubes.

Culture Tubes, Round Bottom, with Screw Cap and Silicone Liner,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. x Qty. Per Maximum
Length Pack Price
No. ml mm Pcs Rs/Pc
71300 055 5 16 x 75 100 40.00
71300 105 10 16 x 125 100 48.00
71300 305 30 25 x 100 100 67.00
71300 605 60 25 x 200 100 71.00

Culture Tubes, Round Bottom, AMBER, with Screw Cap and Silicone Liner,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. x Qty. Per Maximum
Length Pack Price
No. ml mm Pcs Rs/Pc
71310 055 5 16 x 75 100 86.00
71310 105 10 16 x 125 100 118.00
71310 305 30 25 x 100 100 137.00
71310 605 60 25 x 200 100 164.00

81
 ra
ie
iv
R
Culture Tubes, Flat Bottom, with Screw Cap and Silicone Liner,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. x Qty. Per Maximum
Length Pack Price
No. ml mm Pcs Rs/Pc
71200 055 5 16 x 50 100 39.00
71200 155 15 25 x 57 100 48.00
71200 305 30 25 x 95 100 66.00

Culture Tubes, Flat Bottom, AMBER, with Screw Cap and Silicone Liner,
Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. x Qty. Per Maximum
Length Pack Price
No. ml mm Pcs Rs/Pc
71210 055 5 16 x 50 100 89.00
71210 155 15 25 x 57 100 122.00
71210 305 30 25 x 95 100 150.00

PP Caps only for Culture tubes with Silicone Liner, RIVIERA

Cat Suitable Qty. Per Maximum

for OD Pack Price
No. mm Pcs Rs/Pc
71220 016 16 100 12.00
71220 025 25 100 13.00

Tubes, Centrifuge, Conical, Ungraduated, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Dia Total Qty. Per Maximum

Length Pack Price
No. ml mm ±5 mm Pcs Rs/Pc

72800 15 15 19 120 100 47.00

72800 50 50 33 150 100 130.00

Tubes, Centrifuge, Conical, Ungraduated

Cat Capacity Dia Total Qty. Per Maximum

Length Pack Price
No. ml mm ±5 mm Pcs Rs/Pc

60001 01 15 17 112 100 61.00

Supplies will be without any brand mark on the Centrifuge Tubes.

Tubes, Centrifuge, Conical, Graduated with White Graduation,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Capacity O. D. Total Length Qty. Per Maximum
±5 mm Pack Price
No. ml mm Pcs Rs/Pc
72810 15 15 19 120 100 114.00
72810 50 50 33 150 100 239.00

82
 ra
ie
iv
R
Tubes, Centrifuge, Conical, Graduated with White Graduation, HIRSCHMANN

Cat Capacity Graduation Total Length Qty. Per Maximum

Division ±5 mm Pack Price
No. ml ml Pcs Rs/Pc
60201 01 15 0.1 112 100 153.00

Test Tubes, with Rim, Borosilicate Glass,

Made from Heat Resistant, Low Expansion Borosilicate Glass, (suitable for heating applications), RIVIERA
Cat Size Qty. Per Maximum
Pack Price
No. mm Pcs Rs/Pc
71100 001 10 x 75 100 7.15
71100 002 12 x 75 100 7.70
71100 003 12 x 100 100 9.90
71100 004 15 x 125 100 12.95
71100 005 15 x 150 100 15.00
71100 006 18 x 150 100 16.20
71100 007 25 x 100 50 20.85
71100 008 25 x 150 50 24.90
71100 009 25 x 200 50 32.65
71100 010 32 x 200 25 50.30
71100 011 38 x 200 25 61.00

Test Tubes, without Rim, Borosilicate Glass,

Made from Heat Resistant, Low Expansion Borosilicate Glass, (suitable for heating applications), RIVIERA
Cat Size Qty. Per Maximum
Pack Price
No. mm Pcs Rs/Pc
71110 001 10 x 75 100 7.15
71110 002 12 x 75 100 7.70
71110 003 12 x 100 100 9.90
71110 004 15 x 125 100 12.95
71110 005 15 x 150 100 15.00
71110 006 18 x 150 100 16.20
71110 007 25 x 100 50 20.85
71110 008 25 x 150 50 24.90
71110 009 25 x 200 50 32.65
71110 010 32 x 200 25 50.30
71110 011 38 x 200 25 61.00

Test Tubes, with Rim, Borosilicate Glass, (NOT suitable for heating applications), RIVIERA

Cat Size Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
23277 001 10 x 75 100 5.50
23277 002 12 x 75 100 6.00
23277 003 12 x 100 100 8.00

Test Tubes, without Rim, Borosilicate Glass, (NOT suitable for heating applications), RIVIERA

Cat Size Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
23278 001 10 x 75 100 5.50
23278 002 12 x 75 100 6.00
23278 003 12 x 100 100 8.00

83
 ra
ie
iv
R
KETTLES offered below are designed for organic reactions of viscous liquids. Covers are provided with openings containing
interchangeable joints for quick assembly with condensers and stirrers.

Kettles, Reaction, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Body Height Qty. Per Maximum

Dia. Pack Price
No. ml mm mm Pcs Rs/Pc
74600 05 500 95 178 1 10362.00
74600 10 1000 108 178 1 10835.00
74600 20 2000 140 190 1 13349.00
74600 40 4000 140 343 1 16183.00

Bottoms for Reaction Kettles, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
74610 05 500 1 4664.00
74610 10 1000 1 5257.00
74610 20 2000 1 7026.00
74610 40 4000 1 10563.00

Covers for Reaction Kettles, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Size Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
74620 05 500 1 7815.00
74620 10 1000 1 7815.00
74620 20 2000 1 9186.00
74620 40 4000 1 9186.00
Covers for 500 & 1000ml capacity are interchangeable, with four 24/29 I/C joints. For 2000 & 4000ml capacity covers have
three 24/29 & one 34/35 I/C joint

Vessels, Wide Mouth, Flat Flange, 100 mm I. D. & 150 mm O. D., Made from DURAN

Cat Capacity Height Qty. Per Maximum

Pack Price
No. ml mm Pcs Rs/Pc

40009 01 1000 170 1 1868.00

40009 02 2000 205 1 2553.00
40009 05 5000 260 1 5791.00
40009 10 10000 320 1 12099.00
40009 20 20000 400 1 21197.00

Lids for Reaction Vessels, Flat Flange and Interchangeable Joints,

Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Centre Parallel Side Side Side Qty. Per Maximum

Joint Joint Joint Joint Joint Pack Price
No. 50 10 0 15 0 Pcs Rs/Pc

74700 2232 19/26 19/26 24/29 19/26 1 3257.00

74700 2111 19/26 14/23 14/23 14/23 29/32 1 3257.00
74700 4111 29/32 14/23 14/23 14/23 29/32 1 3257.00

84
 ra
ie
iv
R
Watch Glass Dishes, RIVIERA

Cat O. D. Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
71900 41 80 10 71.00
71900 46 100 10 83.00
71900 52 125 10 97.00
71900 57 150 10 125.00

Watch Glass Dishes, AR-GLAS

Cat O. D. Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
23321 41 80 10 325.00
23321 46 100 10 385.00
23321 52 125 10 507.00
23321 57 150 10 698.00
Supplies will be without any brand mark on the Watch Glasses.

Dishes, Petri - DUROPLAN

These Petri Dishes are made by using special manufacturing process. They are superior to other types because they allow
even distribution of culture media and have a distortion free transparency. Also they are unlimited Autoclavable.

Cat Lid O. D. Base O. D. Qty. Per Maximum

x Height x Total Height Pack Price
No. mm mm Pcs Rs/Pc
21755 41 60 x 20 55 x 22 10 1204.00
21755 43 80 x 20 74 x 22 10 1364.00
21755 46 100 x 15 94 x 17 10 1764.00
21755 53 150 x 30 143 x 32 10 3688.00

Plastic Clamps for Joint Fittings

Cat Joint Qty. Per Maximum

Size Pack Price
No. Pcs Rs/Pc
77600 14 B 14 10 49.00
77600 19 B 19 10 52.00
77600 24 B 24 10 53.00
77600 29 B 29 10 58.00

85
 ra
ie
iv
R
Flasks, Flat Bottom, Centre Neck, with I/C Joint, Made from DURAN

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc

204010 36 250 B 14 4 350.00

204020 36 250 B 19 4 350.00

204030 36 250 B 24 4 350.00

204040 36 250 B 29 4 350.00

204050 36 250 B 34 4 414.00

204010 44 500 B 14 4 464.00

204020 44 500 B 19 4 464.00

204030 44 500 B 24 4 464.00

204040 44 500 B 29 4 464.00

204050 44 500 B 34 4 557.00

204020 54 1000 B 19 2 617.00

204030 54 1000 B 24 2 617.00

204040 54 1000 B 29 2 617.00

204050 54 1000 B 34 2 740.00

204070 54 1000 B 45 2 807.00

204090 54 1000 B 55 2 807.00

204030 64 2000 B 24 2 1540.00

204040 64 2000 B 29 2 1540.00

204050 64 2000 B 34 2 1540.00

204070 64 2000 B 45 2 1720.00

204030 68 3000 B 24 1 3355.00

204040 68 3000 B 29 1 3355.00

204050 68 3000 B 34 1 3355.00

204070 68 3000 B 45 1 3627.00

204090 68 3000 B 55 1 3627.00

204030 73 5000 B 24 1 4985.00

204040 73 5000 B 29 1 4985.00

204050 73 5000 B 34 1 4985.00

204070 73 5000 B 45 1 4985.00

204090 73 5000 B 55 1 4985.00

Available in RIVIERA Brand — Prices on Request

86
 ra
ie
iv
R
Flasks, Round Bottom, Centre Neck, with I/C Joint, Made from DURAN

Cat Capacity Joint Qty. Per Maximum

Size Pack Price
No. ml Pcs Rs/Pc

206010 36 250 B 14 4 357.00

206020 36 250 B 19 4 357.00
206030 36 250 B 24 4 357.00
206040 36 250 B 29 4 357.00
206050 36 250 B 34 4 357.00
206010 44 500 B 14 4 394.00
206020 44 500 B 19 4 394.00
206030 44 500 B 24 4 394.00
206040 44 500 B 29 4 394.00
206050 44 500 B 34 4 394.00
206020 54 1000 B 19 2 524.00
206030 54 1000 B 24 2 524.00
206040 54 1000 B 29 2 524.00
206050 54 1000 B 34 2 524.00
206070 54 1000 B 45 2 664.00
206090 54 1000 B 55 2 664.00
206030 64 2000 B 24 2 1272.00
206040 64 2000 B 29 2 1272.00
206050 64 2000 B 34 2 1272.00
206070 64 2000 B 45 2 1430.00
206030 68 3000 B 24 1 3627.00
206040 68 3000 B 29 1 3627.00
206050 68 3000 B 34 1 3627.00
206070 68 3000 B 45 1 4016.00
206090 68 3000 B 55 1 4016.00
206030 73 5000 B 24 1 5484.00
206040 73 5000 B 29 1 5484.00
206050 73 5000 B 34 1 5484.00
206070 73 5000 B 45 1 5484.00
206090 73 5000 B 55 1 5484.00
206050 86 10000 B 34 1 8056.00
206070 86 10000 B 45 1 8056.00
206090 86 10000 B 55 1 8056.00
206090 91 20000 B 55 1 13221.00
Available in RIVIERA Brand — Prices on Request

87
 ra
ie
iv
R
Flasks, Round Bottom, Two Necks, Centre Neck and One Angled Side Neck, each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc
306031 36 250 B 24 B 14 4 616.00
306032 36 250 B 24 B 19 4 616.00
306031 44 500 B 24 B 14 4 713.00
306032 44 500 B 24 B 19 4 713.00
306031 54 1000 B 24 B 14 2 895.00
306032 54 1000 B 24 B 19 2 895.00
306031 64 2000 B 24 B 14 2 1796.00
306032 64 2000 B 24 B 19 2 1796.00
306052 64 2000 B 34 B 19 2 1796.00
306032 68 3000 B 24 B 19 1 4351.00
306052 68 3000 B 34 B 19 1 4351.00
306053 68 3000 B 34 B 24 1 4453.00
306052 73 5000 B 34 B 19 1 6267.00
306053 73 5000 B 34 B 24 1 6267.00
306063 73 5000 B 40 B 24 1 6469.00
306052 86 10000 B 34 B 19 1 9290.00
306053 86 10000 B 34 B 24 1 9290.00
306073 86 10000 B 45 B 24 1 9290.00
306074 86 10000 B 45 B 29 1 9290.00
306075 86 10000 B 45 B 34 1 9290.00
306095 86 10000 B 55 B 34 1 9290.00
306097 86 10000 B 55 B 45 1 9290.00
306095 91 20000 B 55 B 34 1 14714.00
306097 91 20000 B 55 B 45 1 14714.00
Available in RIVIERA Brand — Prices on Request

Flasks, Round Bottom, Two Necks, Centre Neck and One Parallel Side Neck, each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc
406031 36 250 B 24 B 14 4 616.00
406032 36 250 B 24 B 19 4 616.00
406031 44 500 B 24 B 14 4 713.00
406032 44 500 B 24 B 19 4 713.00
406031 54 1000 B 24 B 14 2 895.00
406032 54 1000 B 24 B 19 2 895.00
406031 64 2000 B 24 B 14 2 1796.00
406032 64 2000 B 24 B 19 2 1796.00
406052 64 2000 B 34 B 19 2 1796.00
406032 68 3000 B 24 B 19 1 4351.00
406052 68 3000 B 34 B 19 1 4351.00
406053 68 3000 B 34 B 24 1 4453.00
406052 73 5000 B 34 B 19 1 6267.00
406053 73 5000 B 34 B 24 1 6267.00
406063 73 5000 B 40 B 24 1 6469.00
406052 86 10000 B 34 B 19 1 9290.00
406053 86 10000 B 34 B 24 1 9290.00
406073 86 10000 B 45 B 24 1 9290.00
406074 86 10000 B 45 B 29 1 9290.00
406075 86 10000 B 45 B 34 1 9290.00
406095 86 10000 B 55 B 34 1 9290.00
406097 86 10000 B 55 B 45 1 9290.00
406095 91 20000 B 55 B 34 1 14714.00
406097 91 20000 B 55 B 45 1 14714.00
Available in RIVIERA Brand — Prices on Request

88
 ra
ie
iv
R
Flasks, Round Bottom, Three Necks, Centre Neck and Two Angled Side Necks,
each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc

306121 36 250 B 19 B 14 4 888.00

306222 36 250 B 19 B 19 4 888.00
306131 36 250 B 24 B 14 4 888.00
306232 36 250 B 24 B 19 4 888.00
306141 36 250 B 29 B 14 4 888.00
306242 36 250 B 29 B 19 4 888.00
306121 44 500 B 19 B 14 4 1154.00
306222 44 500 B 19 B 19 4 1154.00
306131 44 500 B 24 B 14 4 1154.00
306232 44 500 B 24 B 19 4 1154.00
306141 44 500 B 29 B 14 4 1154.00
306242 44 500 B 29 B 19 4 1154.00
306131 54 1000 B 24 B 14 2 1268.00
306232 54 1000 B 24 B 19 2 1268.00
306333 54 1000 B 24 B 24 2 1268.00
306242 54 1000 B 29 B 19 2 1268.00
306252 54 1000 B 34 B 19 2 1268.00
306353 54 1000 B 34 B 24 2 1268.00
306131 64 2000 B 24 B 14 2 2421.00
306232 64 2000 B 24 B 19 2 2421.00
306242 64 2000 B 29 B 19 2 2421.00
306252 64 2000 B 34 B 19 2 2421.00
306353 64 2000 B 34 B 24 2 2421.00
306363 64 2000 B 40 B 24 2 2421.00
306232 68 3000 B 24 B 19 1 5393.00
306252 68 3000 B 34 B 19 1 5632.00
306353 68 3000 B 34 B 24 1 5632.00
306363 68 3000 B 40 B 24 1 5632.00
306252 73 5000 B 34 B 19 1 7291.00
306555 73 5000 B 34 B 34 1 7291.00
306363 73 5000 B 40 B 24 1 7291.00
306383 73 5000 B 50 B 24 1 7428.00
306252 86 10000 B 34 B 19 1 12844.00
306353 86 10000 B 34 B 24 1 12844.00
306373 86 10000 B 45 B 24 1 12844.00
306474 86 10000 B 45 B 29 1 12844.00
306575 86 10000 B 45 B 34 1 12844.00
306595 86 10000 B 55 B 34 1 12844.00
306797 86 10000 B 55 B 45 1 12844.00
306595 91 20000 B 55 B 34 1 18249.00
306797 91 20000 B 55 B 45 1 18249.00
Available in RIVIERA Brand — Prices on Request

89
 ra
ie
iv
R
Flasks, Round Bottom, Three Necks, Centre Neck and Two Parallel Side Necks,
each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc
406121 36 250 B 19 B 14 4 888.00
406222 36 250 B 19 B 19 4 888.00
406131 36 250 B 24 B 14 4 888.00
406232 36 250 B 24 B 19 4 888.00
406141 36 250 B 29 B 14 4 888.00
406242 36 250 B 29 B 19 4 888.00
406121 44 500 B 19 B 14 4 1154.00
406222 44 500 B 19 B 19 4 1154.00
406131 44 500 B 24 B 14 4 1154.00
406232 44 500 B 24 B 19 4 1154.00
406141 44 500 B 29 B 14 4 1154.00
406242 44 500 B 29 B 19 4 1154.00
406131 54 1000 B 24 B 14 2 1268.00
406232 54 1000 B 24 B 19 2 1268.00
406333 54 1000 B 24 B 24 2 1268.00
406141 54 1000 B 29 B 14 2 1268.00
406242 54 1000 B 29 B 19 2 1268.00
406252 54 1000 B 34 B 19 2 1268.00
406353 54 1000 B 34 B 24 2 1268.00
406272 54 1000 B 45 B 19 2 1362.00
406373 54 1000 B 45 B 24 2 1362.00
406131 64 2000 B 24 B 14 2 2421.00
406232 64 2000 B 24 B 19 2 2421.00
406333 64 2000 B 24 B 24 2 2421.00
406141 64 2000 B 29 B 14 2 2421.00
406242 64 2000 B 29 B 19 2 2421.00
406252 64 2000 B 34 B 19 2 2421.00
406353 64 2000 B 34 B 24 2 2421.00
406363 64 2000 B 40 B 24 2 2598.00
406272 64 2000 B 45 B 19 2 2598.00
406373 64 2000 B 45 B 24 2 2598.00
406232 68 3000 B 24 B 19 1 5632.00
406252 68 3000 B 34 B 19 1 5632.00
406353 68 3000 B 34 B 24 1 5632.00
406363 68 3000 B 40 B 24 1 5632.00
406272 68 3000 B 45 B 19 1 5926.00
406373 68 3000 B 45 B 24 1 5926.00
406252 73 5000 B 34 B 19 1 7291.00
406353 73 5000 B 34 B 24 1 7291.00
406555 73 5000 B 34 B 34 1 7291.00
406363 73 5000 B 40 B 24 1 7291.00
406272 73 5000 B 45 B 19 1 7428.00
406373 73 5000 B 45 B 24 1 7428.00
406383 73 5000 B 50 B 24 1 7428.00
406252 86 10000 B 34 B 19 1 12844.00
406353 86 10000 B 34 B 24 1 12844.00
406373 86 10000 B 45 B 24 1 12844.00
406474 86 10000 B 45 B 29 1 12844.00
406575 86 10000 B 45 B 34 1 12844.00
406595 86 10000 B 55 B 34 1 12844.00
406797 86 10000 B 55 B 45 1 12844.00
406595 91 20000 B 55 B 34 1 18249.00
406797 91 20000 B 55 B 45 1 18249.00
Available in RIVIERA Brand — Prices on Request

90
 ra
ie
iv
R
Flasks, Round Bottom, Four Necks, Centre Neck and Three Angled Side Necks,
each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc

306000 44 500 All Sizes All Sizes 4 1471.00

306000 54 1000 All Sizes All Sizes 2 1602.00
306000 64 2000 All Sizes All Sizes 2 2999.00
306000 68 3000 All Sizes All Sizes 1 6614.00
306000 73 5000 All Sizes All Sizes 1 7837.00
306000 86 10000 All Sizes All Sizes 1 14417.00
306000 91 20000 All Sizes All Sizes 1 18837.00
Available in RIVIERA Brand — Prices on Request

Note : While placing Order, required Joint Sizes should be speicified

Flasks, Round Bottom, Four Necks, Centre Neck and Three Parallel Side Necks,
each with I/C Joint, Made from DURAN

Cat Capacity Centre Side Qty. Per Maximum

Joint Joint Pack Price
No. ml Size Size Pcs Rs/Pc

406000 44 500 All Sizes All Sizes 4 1471.00

406000 54 1000 All Sizes All Sizes 2 1602.00
406000 64 2000 All Sizes All Sizes 2 2999.00
406000 68 3000 All Sizes All Sizes 1 6614.00
406000 73 5000 All Sizes All Sizes 1 7837.00
406000 86 10000 All Sizes All Sizes 1 14417.00
406000 91 20000 All Sizes All Sizes 1 18837.00
Available in RIVIERA Brand — Prices on Request

Note : While placing Order, required Joint Sizes should be speicified

91
 ra
ie
iv
R
SILICA WARE
THERMAL PROPERTIES - THERMAL EXPANSION

Mean value of the coefficient of thermal expansion between 0 and

800ºC - 5.5 X 10-7/ºC.
Fused silica is neutral to abrupt temperature changes. Vitreous silica
is highly viscous. Viscosity drops uniformly as the temperature
rises over softening point.

Average Co-efficient expansion 0º to 800ºC 5.5 x 10-7/ºC

Thermal Conductivity Temp CAl
20ºC cm -1 S e c-1 º C -1
36 X 10-4

CHEMICAL PROPERTIES 100ºC 38 X 10-4

250ºC 41 X 10-4
Fused Silica is neutral to all halogens and acids
500ºC 50 X 10-4
irrespective of temperature or concentration except
800ºC 57 X 10-4
hydro-fluoric and phosphoric acid. Phosphoric acid
1000ºC 65 X 10-4
affects fused silica only at high temperatures and can
Specific heat TempºC Cal/g
be concentrated successfully in silica vessels. For all
0 0.166
ordinary purposes they can be used with phosphoric
100 0.200
acid. Sulphuric, Nitric and Hydrochloric acids or any
500 0.275
mixture of these acids, do not affect Fused Silica even
1000 0.290
at temperatures upto 1000ºC.
Softening temp. 1700ºC
Strong alkalis react with fused silica. Cleaning of Silica Annealing temp. 1150ºC
ware regularly can ensure good service. Salts and basic Working temp. 1900ºC to
oxides react at elevated temperatures, particularly above 2000ºC
their melting point. The extent of reaction is largely Operating temp.
determined by the thermal diffusion of impurities into (Continuous) 1050ºC
the fused silica. Alkali metals have the highest diffusivity Operating temp.
and are the most damaging. (intermittent) 1350ºC

Silica Basin with Spout, Round Form, RIVIERA

Cat Nominal Diameter Height Qty. Per Maximum

Capacity (D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78500 03 20 55 23 10 461.00
78500 06 45 75 27 10 662.00
78500 09 70 87 33 10 849.00
78500 12 85 94 36 10 1211.00
78500 15 100 100 45 10 1276.00
78500 18 200 113 47 10 2092.00
78500 24 400 142 63 10 3413.00

92
 ra
ie
iv
R
Silica Basin with Spout, Deep Form, RIVIERA

Cat Nominal Diameter Height Qty. Per Maximum

Capacity (D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78501 03 10 40 18 10 1371.00
78501 06 15 50 25 10 1524.00
78501 09 45 60 30 10 1705.00
78501 12 90 80 45 10 1881.00
78501 15 170 100 55 10 2536.00

Silica Basin with Spout, Flat Form, RIVIERA

Cat Nominal Diameter Height Qty. Per Maximum

Capacity (D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78502 03 20 69 15 10 1059.00
78502 06 25 79 15 10 1314.00
78502 09 75 101 20 10 1554.00
78502 12 125 131 23 10 2070.00

Silica Capsules Circular, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78503 03 10 40 15 10 460.00
78503 06 20 48 15 10 531.00
78503 09 25 54 15 10 678.00

Silica Crucible without Lid, Low Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78504 03 15 41 25 10 218.00
78504 06 25 47 28 10 230.00
78504 09 50 57 37 10 461.00
78504 12 80 67 45 10 859.00
78504 15 100 70 48 10 1217.00
78504 18 150 82 51 10 1528.00

Silica Lid, Low Form, RIVIERA

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
78505 03 15 10 206.00
78505 06 25 10 222.00
78505 09 50 10 330.00
78505 12 80 10 649.00
78505 15 100 10 817.00
78505 18 150 10 1342.00

93
 ra
ie
iv
R
Silica Crucible without Lid, Tall Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78506 03 20 35 38 10 528.00
78506 06 30 43 39 10 614.00
78506 09 50 51 51 10 864.00
78506 12 200 73 81 10 1807.00

Silica Crucible Lid, Tall Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78507 03 20 Suit To Crucible Suit To Crucible 10 405.00
78507 06 30 Suit To Crucible Suit To Crucible 10 419.00
78507 09 50 Suit To Crucible Suit To Crucible 10 527.00
78507 12 200 Suit To Crucible Suit To Crucible 10 800.00

Silica Moisture Dish with Lid, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78508 03 8 38 11 10 1194.00
78508 06 20 54 12 10 1492.00
78508 09 35 75 12 10 1926.00

Silica Volatile Matter Crucible with Lid, RIVIERA

Cat Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. mm mm Pcs Rs/Pc
78509 03 25 38 10 909.00
Spares
78509 06 Only Lid 10 219.00
78509 09 Only Plunger 10 347.00

94
 ra
ie
iv
R
QUARTZ WARE
Vitreous Silica is the glassing modification of Electrical resistivity (at 350°C) 7 x 107 ohm cm
silcondioxide with a purity of 99.9% in the transparent Average co-efficient of expansion 5.5 x 10-7 / °C
form and is called fused silica. All our silica ware Softening point 1685° C
products are made out of fused silica. Annealing point 1200° C
Operating temperature (continuous) 1050° C
Fused silica is completely unaffected by acids such as
Operating temperature (intermittent) 1350° C
sulpuric, nitric and hydrochloric, however, it can be af-
Working temperature 1950° C
fected by hdrofluric acid and at high temperatures also
by phosphoric acid. Hot alkalies and certain metallic Strain point 1120° C
oxides also react on fused silica.

Fused silica is boron free

They are of very low expansion and hence have excel-

lent dimensional stability and thermal shock resistance.

Quartz Basin with Spout, Round Form, RIVIERA

Cat Nominal Diameter Height Qty. Per Maximum

Capacity (D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78406 03 20 55 23 10 872.00
78406 06 45 75 27 10 1142.00
78406 09 70 87 33 10 1704.00
78406 12 85 94 36 10 3167.00
78406 15 100 100 39 5 4434.00
78406 18 200 113 47 5 7125.00

Quartz Capsules Circular, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78407 03 10 40 15 10 436.00
78407 06 20 48 15 10 597.00
78407 09 25 54 15 10 889.00

95
 ra
ie
iv
R
Triangles on Nickel Chrome wire, Quartz, RIVIERA

Cat Height Qty. Per Maximum

Pack Price
No. mm Pcs Rs/Pc
78409 03 24 10 240.00
78409 06 28 10 281.00
78409 09 32 10 315.00
78409 12 35 10 361.00
78409 15 38 10 637.00

Quartz Crucible without Lid, Low Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78401 03 15 41 25 10 436.00
78401 06 25 47 28 10 637.00
78401 09 50 57 37 10 1033.00
78401 12 80 67 45 10 1664.00
78401 15 100 70 48 10 2380.00
78401 18 150 82 54 10 3012.00

Quartz Lid, Low Form, RIVIERA

Cat Capacity Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc
78402 03 15 10 436.00
78402 06 25 10 637.00
78402 09 50 10 952.00
78402 12 80 10 1623.00
78402 15 100 10 2140.00
78402 18 150 10 2535.00

Quartz Muffle Tray Rod Type, RIVIERA

Cat No. of Qty. Per Maximum

Holes Pack Price
No. Pcs Rs/Pc
78408 02 2 10 1550.00
78408 06 4 10 3041.00

96
 ra
ie
iv
R
Quartz Crucible without Lid, Tall Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. ml mm mm Pcs Rs/Pc
78403 06 30 39 43 10 1148.00
78403 09 50 51 51 10 1583.00
78403 12 200 73 81 10 3960.00

Quartz Crucible Lid, Tall Form, RIVIERA

Cat Capacity Diameter Height Qty. Per Maximum

Pack Price
No. ml mm mm Pcs Rs/Pc
78404 06 30 Suit To Crucible Suit To Crucible 10 792.00
78404 09 50 Suit To Crucible Suit To Crucible 10 1033.00
78404 12 200 Suit To Crucible Suit To Crucible 10 1979.00

Quartz Volatile Matter Crucible with Lid, RIVIERA

Cat Diameter Height Qty. Per Maximum

(D) (H) Pack Price
No. mm mm Pcs Rs/Pc
78405 03 25 38 10 1022.00
Spares
78405 06 Only Lid 10 281.00
78405 09 Only Plunger 10 362.00

97
 ra
ie
iv
R
STERISTOPPERS

STERISTOPPERS are manufactured by M/s. Heinz Herenz, • A special manufacturing process makes them sterilizable
Hamburg, Germany who have 45 years of experience and up to 2000 C.
operate in more than 60 countries across the world. Their • Reusable after sterilization.
speciality is in laboratory consumables and hospital supplies. • Tight fitting to ensure airtight and dust free working.
They are reputed for their own innovative designs and • Time and money saving.
developmental activity having a number of patents and copy- • Also used for covering sharp pointed needles and
rights in their own name. instruments, specially for sterile sealing in pouches.
STERISTOPPERS are generally used as sealing for
Microbiological and Tissue culture samples in test tubes, In addition to the sizes mentioned in this pricelist, there are
conical flasks and solution bottles. They replace traditional many other sizes of STERISTOPPERS available which are
aluminium foils or cotton plugs which normally take suitable for different applications involving various kinds of
considerable time to prepare. Besides, such sealings may glassware and for other laboratory usage.
not be foolproof from the point of view of contamination. In order to select the correct size of STERISTOPPERS the
Therefore, STERISTOPPERS answer all the problems internal diameter of the glassware would be relevant.
associated with traditional sealings. Therefore, for sizes other than those mentioned in this pricelist,
Some of the unique features of STERISTOPPERS are : we request you to inform us the internal diameter of the neck
• Easy and immediate fixing. of the glassware in which the STERISTOPPERS are required
• Active breathing for micro-organisms and bacteria as they to be fitted so that a proper selection of the size can be made
are air permeable. by us before making our offer.
• No contamination from outside.

STERISTOPPERS - Sterilizable & Reusable Stoppers Made of Cellulose.

Items are generally used as sealing for Microbiological & tissue culture samples in the test tubes, conical flasks and solution
bottles

Cat Size Suitable Qty. Per Maximum

For Pack Price
No. Pcs Rs/Pc

20113 07 13 H Test Tube O. D. 15 mm 100 18.00

20114 50 14.5 Test Tube O. D. 18 mm 100 18.00

20120 01 20P Test Tube O. D. 25 mm 100 22.00

20127 23 MA 2/3 Test Tube O. D. 32 mm 50 55.00

20127 00 27 Test Tube O. D. 38 mm 50 43.00

Conical Flask 250 ml

Conical Flask 500 ml

20136 00 36 Conical Flask 1000 ml 50 70.00

20145 01 45P Conical Flask 2, 3, & 5 Ltr. 30 156.00

Solution Bottle 10 & 20 Ltr.

100
 ra
ie
iv
R
Microscope Slides
Microscope Slides are essential part of the system for illuminating specimens for examination under a Micro-
scope. Together with the microscope it facilitates illumination of the specimen for observation.

The RIVIERA Microscope Slides are made from high quality transparent and colourless glass sheets having
excellent optical transmission characteristics and parallelism between the surfaces.

The Microscope Slides are manufactured on special purpose, precision, high speed glass cutting machines
which ensure excellent dimensional control and edges are free from any defects. The cut edges are then ground
to a uniform consistency to make the slides absolutely safe in handling. Besides ground edges, double frosted
slides are also available for identification of specimens and records.

Microscope Slides, Ground Edges, RIVIERA

Cat Size Thickness Slides Per Qty. Per Maximum

LxW +0.2/-0 Packet Case Price
No. +1.0/-0 mm mm Pcs Packets Rs/Packet

72900 135 75 x 25 1.00 50 10 83.00

Microscope Slides, with Ground Edges, Frosted, RIVIERA

Cat Size Thickness Slides Per Qty. Per Maximum

LxW +0.2/-0 Packet Case Price
No. +1.0/-0 mm mm Pcs Packets Rs/Packet

72910 135 75 x 25 1.00 50 10 118.00

101
 Laboratory Hotplates

ra
ie
Heats, stirs and looks good

iv
R
New generation of laboratory hotplates from SI ANALYTICS

Technical data SLR Numerous good properties in an attractive design

Dimensions (W x H x L in mm) 240 x 85 x 370
Our new laboratory hotplates have been designed to fulfil the varied
Glass ceramic area (mm) 235 x 235 and high demands placed upon them by everyday laboratory life,
Weight (kg) approx. 3.8 hence they are made to heat, stir and regulate.

Heated zone (mm) ∅ 155 The hotplates for these instruments use Schott’s glass ceramic
CERAN panels, which are known for their tested reliability. Apart
Voltage (V) 230/240
from their attractive design, they are distinguished by their excellent
Power consumption (kW) 0.9 chemical resistance and high-grade surface quality as well as
Max. surface temperature (0C) approx. 600 excellent thermal properties. It can survive temperature shock of
more than 700 °C without any problems whatsoever. The heat is
Min. time to reach boiling approx. 15 transferred quickly and without loss thanks to the high infrared
point 1 Lt. H2O (min.)*
transparency. Glass ceramic surfaces remain level and are free of
Stirrer integrated pores.
-1
Min. /max. speed (min ) 100/1100 The new generation of hotplates has no open operating elements
Max. stirring volume (Lt H2O) 20 and also no limiting frame or corners for dirt to collect in. Therefore
hotplates by SI ANALYTICS are easy to clean.
Temperature control possible between
25 & 200 0C
Quality and safety
Protection system IP 20 Naturally the new hotplates are CE certified and have been developed
Protection class 1 and produced in accordance with the internationally recognised quality
standards. The hotplates have a residual heat indicator which warns
Admiss. ambient temperature (0C) 10-40 the user of the danger of injuries. The hotplates cannot overheat, as
Admiss. humidity (%) 85 an excess temperature protection device has been built into every
model. The stable casing which is hermetically sealed from above
Material used for housing Coated die-cast
and made of nonflammable Duroplast ensures that the hotplates have
Thread for stand fixation M8 long, stable service life without problems. A special stand on the
Cable connection socket Cold appliances housing makes a safe connection between the laboratory hotplate
and additional equipment e.g. thermometers, possible.
Cat. No. 28541 6373
Price On Request Heating, Stirring & Regulating - SLR
This hotplate enables slow heating, stirring and temperature control.
* Measured with a 3 Lt. glass beaker at
250 C ambient temperature and 1 bar air pressure.

102
 ra
ie
iv
R
Distillation Unit, All Glass, with Quartz Heater, ‘O’ Ring Type Condenser Fixing arrangement, without Auto Cut-off,
Horizontal Type, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72200 15 Single 1.25 35 1.5 1.5 - 2.5 1 13682.00
72200 1515 Double 3.0 60 1.5 0.8 - 1.2 1 27362.00
72200 157 Condenser only for above unit 2860.00
72200 155 Boiler only for above unit 6662.00
72200 156 Quartz Heater only for above unit 4764.00
72200 200 Auto cut-off system for single stage with sensor (Optional) 6824.00
72200 300 Auto cut-off system for double stage with sensor (Optional) 13654.00

Distillation Unit, All Glass, with Metal Heater,‘O’ Ring Type Condenser Fixing arrangement,
Horizontal Type, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA

Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
722210 040 Single, without 3.0 60 4.0 1.5 -2.5 1 22804.00
Auto Cut-off
722210 045 Single, with 3.0 60 4.0 1.5 -2.5 1 29000.00
Auto Cut-off
722210 043 Condenser only for above unit 5721.00
722210 041 Boiler only for above unit 8576.00
722210 042 Metal Heater only for above unit 7625.00
72200 100 Auto cut-off system for single stage (Optional) 6824.00
Distillation Unit, All Glass, with Ceramic Heater,‘O’ Ring Type Condenser Fixing arrangement,
Horizontal Type, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
722211 040 Single, without 3.0 60 4.0 1.5 - 2.5 1 25058.00
Auto Cut-off
722211 045 Single, with 3.0 60 4.0 1.5 - 2.5 1 31255.00
Auto Cut-off
722210 043 Condenser only for above unit 5721.00
722211 041 Boiler only for above unit 8831.00
722211 042 Ceramic Heater only for above unit 8831.00
72200 200 Auto cut-off system for single stage with sensor (Optional) 6824.00
722211 4040 Double, without 6.0 50 x 2 inputs 4.0 1.5 - 2.5 1 50117.00
Auto Cut-off
72200 300 Auto cut-off system for double stage with sensor (Optional) 13654.00

Distillation Unit, All Glass, with Heater and In-Built Cut-Off System with Reset Button
Horizontal Type, Made from Heat Resistant, Low Expansion Borosilicate Glass, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72211 15 Single 1.25 35 1.5 1.5 - 2.5 1 29178.00
72201 157 Condenser only for above unit 2860.00
72201 1554 Boiler only for above unit with PT 100 Sensor provision 6662.00
72201 156 Quartz Heater only for above unit 4764.00
72211 40 Single 3.0 50 4.0 1.5 - 2.5 40178.00
722210 043 Condenser only for above unit 5721.00
722210 0414 Boiler only for above unit with PT 100 Sensor provision 8576.00
722210 0425 Ceramic Heater only for above unit 7625.00
72211 1515 Double 3.0 35 x 2 inputs 1.5 0.8 - 1.2 1 58347.00
72211 4040 Double 6.0 50 x 2 inputs 4.0 0.8 - 1.2 1 80355.00
Note : The above quality of Distillate is obtained by using treated water as boiler feed & collecting the Distillate in
closed quartz container.
103
 ra
ie
iv
R
Distillation Unit, Single Stage, with Borosilicate Boiler & Condenser, Built-in Cut-Off with Reset Button,
CABINET TYPE, Horizontal Model, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72212 15 Single 1.5 35 1.5 1.5 - 2.5 1 40178.00
72201 157 Condenser only for above unit 2860.00
72201 1555 Boiler only for above unit with PT 100 Sensor provision 6662.00
72201 1566 Quartz Heater only for above unit 4764.00
72212 40 Single 3.0 50 4.0 1.5 - 2.5 1 54443.00
722210 043 Condenser only for above unit 5721.00
722210 0415 Boiler only for above unit with PT 100 Sensor provision 8576.00
722210 0426 Ceramic Heater only for above unit 7625.00

Distillation Unit, Double Stage, with Borosilicate Boiler & Condenser, Built-in Cut-Off with Reset Button,
CABINET TYPE, Horizontal Model, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72213 15 Double 3.0 35 x 2 inputs 1.5 0.8 - 1.2 1 81085.00
72201 157 Condenser only for above unit 2860.00
72201 1555 Boiler only for above unit with PT 100 Sensor provision 6662.00
72201 1566 Quartz Heater only for above unit 4764.00
72213 40 Double 6.0 50 x 2 inputs 4.0 0.8 - 1.2 1 113482.00
722210 043 Condenser only for above unit 5721.00
722210 0415 Boiler only for above unit with PT 100 Sensor provision 8576.00
722210 0426 Ceramic Heater only for above unit 7625.00

Distillation Unit, Single Stage, All Quartz, with Built-in Quartz Heater, Vertical Panel Mounted, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72220 10 Single 1.0 30 1.0 1.5 - 2.0 1 41919.00
72220 105 Boiler only for above unit 1 17158.00
72220 106 Condenser only for above unit 1 19040.00
72220 20 Single 1.5 40 2.0 1.5 - 2.0 1 47634.00
72220 205 Boiler only for above unit 1 22863.00
72220 206 Condenser only for above unit 1 22863.00
72220 30 Single 2.0 50 3.0 1.5 - 2.0 1 66605.00
72220 305 Boiler only for above unit 1 24761.00
72220 306 Condenser only for above unit 1 35246.00
72220 40 Single 3.0 60 4.0 1.5 - 2.0 1 81010.00
72220 405 Boiler only for above unit 1 31418.00
72220 406 Condenser only for above unit 1 52410.00
72220 50 Single 4.0 65 5.0 1.5 - 2.0 1 95280.00
72220 505 Boiler only for above unit 1 41265.00
72220 506 Condenser only for above unit 1 54913.00

Note : The above quality of Distillate is obtained by using treated water as boiler feed & collecting the Distillate in
closed quartz container.

104
 ra
ie
iv
R
Distillation Unit, Single Stage, with Quartz Boiler, Borosilicate Condenser & Built-in Quartz Heater,
Vertical Panel Mounted, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72230 010 Single 1.0 30 1.0 1.5 - 2.0 1 24615.00
72230 110 Boiler, Quartz only for above unit 1 17158.00
72230 210 Condenser, Borosilicate only for above unit 1 2379.00
72230 020 Single 1.5 40 2.0 1.5 - 2.0 1 27525.00
72230 120 Boiler, Quartz only for above unit 1 22863.00
72230 220 Condenser, Borosilicate only for above unit 1 2379.00
72230 030 Single 2.0 50 3.0 1.5 - 2.0 1 30622.00
72230 130 Boiler. Quartz only for above unit 1 24756.00
72230 230 Condenser, Borosilicate only for above unit 1 2860.00
72230 040 Single 3.0 60 4.0 1.5 - 2.0 1 41265.00
72230 140 Boiler, Quartz only for above unit 1 31418.00
72230 240 Condenser, Borosilicate only for above unit 1 3807.00
72230 050 Single 4.0 65 5.0 1.5 - 2.0 1 46343.00
72230 150 Boiler, Quartz only for above unit 1 41265.00
72230 250 Condenser, Borosilicate only for above unit 1 3807.00

Distillation Unit, Double Stage, with Quartz Boiler, Quartz Condenser & Built-in Quartz Heater,
Vertical Panel Mounted, RIVIERA
Cat Type Power Cooling Water Output Conductivity Qty. Per Maximum
kW Requirement Pack Price
No. Ltrs/Hr (Approx.) Ltrs. / Hr µs/cm Pcs Rs/Pc
72240 010 Double 2.0 40 1.0 1.5 - 2.0 1 89765.00
72240 011 Lower Boiler, Quartz only for above unit 1 19056.00
72240 012 Upper Boiler with Condenser,
Quartz only for above unit 1 68557.00
72240 015 Double 3.0 60 1.5 1.5 - 2.0 1 102801.00
72240 0151 Lower Boiler, Quartz only for above unit 1 23815.00
72240 0152 Upper Boiler with Condenser, 1 85709.00
Quartz only for above unit
72240 020 Double 4.0 60 2.0 1.5 - 2.0 1 125967.00
72240 021 Lower Boiler, Quartz only for above unit 1 25697.00
72240 022 Upper Boiler with Condenser, 1 92576.00
Quartz only for above unit
72240 025 Double 4.5 70 2.5 1.5 - 2.0 1 134647.00
72240 0251 Lower Boiler, Quartz only for above unit 1 28595.00
72240 0252 Upper Boiler with Condenser, 1 102801.00
Quartz only for above unit
72240 030 Double 5.0 75 3.0 1.5 - 2.0 1 156374.00
72240 031 Lower Boiler, Quartz only for above unit 1 31418.00
72240 032 Upper Boiler with Condenser, 1 113152.00
Quartz only for above unit
72240 040 Double 6.0 85 4.0 1.5 - 2.0 1 228629.00
72240 041 Lower Boiler, Quartz only for above unit 1 51436.00
72240 042 Upper Boiler with Condenser, 1 185180.00
Quartz only for above unit
72240 050 Double 8.0 100 5.0 1.5 - 2.0 1 267860.00
72240 051 Lower Boiler, Quartz only for above unit 1 57158.00
72240 052 Upper Boiler with Condenser, 1 205593.00
Quartz only for above unit

Note : The above quality of Distillate is obtained by using treated water as boiler feed & collecting the Distillate in
closed quartz container.

107
 ra
ie
iv
R
OPTIONAL ACCESSORIES FOR DISTILLATION UNITS

Cat Qty. Per Maximum

Description Pack Price
No. Pcs Rs/Pc
72250 000 Auto Cut-Off System with Audio Alarm for single stage (Capacities 1 to 5 ltrs/hr) 1 14470.00
and also for double stage (Capacities upto 2.5 ltrs/hr only)
72250 100 Auto Cut-Off System with Audio Alarm for 1 24615.00
double stage (Capacities 3 ltrs/hr and above only)
72260 000 Water Softner for Boiler Feed 1 14470.00
72260 001 Resin for Water Softner 1 3368.00

Warranty Clause for Riviera Distillation Units:

The above equipment is warranted with following conditions:
• The items supplied will carry a warranty of 12 months from the date of the invoice against manufacturing defects.
The company will repair or replace the parts going defective free of cost during the warranty period. Vacuumatic
items and consumables like bulb, fuse, heater, battery, etc. are not covered under warranty.
• Glass parts do not carry any warranty after installation.
• Complaints arising out of mishandling willful or through ignorance, negligence or resulting from accidents, attempted
repairs, and inadequate power supply, fluctuation in voltage, general wear and tear are not covered under this
warranty.
• Complaints should be communicated to the warrantor in writing.

All Glass Filter Flask for Filter Holder 47mm

Excellent suitability for vacuum filteration of liquids for analysis, especially suitable for HPLC set up, both solvent and mobile
phases. Very good compatability with chemicals including very aggresive solvents - all parts made of borosilicate glass.

Specifications :
Filter size : 47mm dia.
Effective Filteration area : 9.60 cm2
Filter flask capacity : 1000 ml
Funnel capacity : 300 ml
Spring clamp : Anodised Aluminium
Pressure : Vacuum only
Cat Description Qty. Per Maximum
Pack Price
No. Pcs Rs/Pc
73200 544 Complete set 1 13244.00
Parts only
73200 504 Flask for all glass filter holder 47mm 1 4165.00
73200 502 Funnel for all glass filter holder 47mm 1 3133.00
73200 503 Filter base for all glass filter holder 47mm 1 4383.00
73200 501 Clamp 1 1561.00

108
 ra
ie
iv
R
Portable, Oil-Free Vacuum Pump, Rivotek
Excellent suitability for HPLC & Filtration applications. Supplied complete with Vacuum Gauge & Regulator.
Salient Features : • Valves made of SS316
• No Lubrication required • Built-in micro suction filter
• Noiseless performance • Extra large bearings for smooth trouble free operation
• Light weight & portable
• Oil-free construction Applications :
• Practically maintenance free • Laboratories
• All parts manufactured from special graded • Pollution Control Equipments
Aluminium die cast material • Medical Instruments
• Diaphragms made of special 2-ply • Dentistry
Nylon reinforced Neoprene Rubber • Chemical Analysers
• TEFLON, VITON diaphragms available • Suction Apparatus
Cat Max Max Max Approx. Motor Qty. Per Maximum
Flow Vacuum Pressure Weight Pack Price
No. Lrs./min Inches of Hg Psi Kg HP Pcs Rs/Pc
21202 500 15 27 35 4.10 1/16 1 12590.00
Pumps with various capacities and specifications available. Please contact us for detailed specifications and price.

Cat Description Maximum

Price
No. Rs/Pc
7001 0519 Moisture trap 2110.00

Glass Filter Holder 47mm : Excellent suitability for microbiological application.

Specifications : Funnel capacity : 300 ml

Filter size : 47mm dia. Spring clamp : Anodised
Effective Filteration area : 9.60 cm2 Aluminium
Filter flask capacity : 1000 ml Stopper - Perforated - Neoprene

Cat Description Qty. Per Maximum

Pack Price
No. Pcs Rs/Pc
73210 444 Complete set 1 11562.00
Parts only
73210 413 Flask for all glass filter holder 47mm 1 3728.00
73210 412 Funnel for all glass filter holder 47mm 1 3133.00
73210 414 Filter base for all glass filter holder 47mm complete with Neoprene Stopper 1 3133.00
73210 411 Clamp 1 1561.00
73210 415 Perforated Neoprene Stopper only 1 305.00
Glass Filter Holder 25mm: Excellent suitability for microbiological application.

Specifications :
Filter size : 25mm dia.
Filter flask capacity : 125 ml
Funnel capacity : 15 ml
Spring clamp : Anodised Aluminium
Stopper - Perforated - Neoprene
Cat Description Qty. Per Maximum
Pack Price
No. Pcs Rs/Pc
73220 224 Complete set 1 6835.00
Parts only
73220 213 Flask for filter holder 25mm 1 1463.00
73220 212 Funnel for filter holder 25mm 1 1671.00
73220 214 Filter base for filter holder 25mm complete with Neoprene Stopper 1 2506.00
73220 211 Clamp 1 1201.00
73220 215 Perforated Neoprene Stopper only 1 305.00

109
 R iera
ra
ie
iv
iv
R
MEMBRANE FILTERS
Riviera Membrane Filters are ideal to serve the industries which desire fine filtration. These Membrane Filters
are used extensively for removal of particulate, bacteria and virus’ from liquids as well as from air
Cellulose Nitrate Membrane Filter - Type RCN, RIVIERA
Cellulose Nitrate Membrane Disc filters are hydrophilic, non-media migrating, biologically inert, plain white absolute membrane filter available
in wide range of pore size from 0.22µm to 0.80 µm.
Features and Benefits : Applications : Specifications :
• Absolute Retention • Sample Preparations • Retention Efficiency: 0.22 µm : LRV > 7 for Br. diminuta
• High Flow rates • Microbiological studies • Sterilisation: Autoclavable at 121°C
• Narrow pore size distribution • Filtration of Aqueous solution. • Maximum Operating Temp: 80°C continuous
• Low extractable levels • Maximum Operating Pressure: 5 kg/cm2
• Bio safety: Passes the Biological tests for Class VI plastics as
described in USP.
• Oxidizable Matter: Passes as per USP.

Integrity Test Data

Pore size Wetting Bubble Point Water Flow Rate

Fluid
µm psi kg/cm2 ml/min/cm2 at ∆P=10psi at 20°C
0.22 Water 52 3.65 20
0.45 Water 33 2.32 46
0.80 Water 14 0.98 259

Cat Porosity Dia No. of No. of Boxes Maximum

Base Sheets per Price
No. µm mm per Box Case Rs/Pc
75400 4722 0.22 47 100 10 1431.00
75400 4745 0.45 47 100 10 1431.00
75400 4780 0.80 47 100 10 1431.00

Cellulose Nitrate Membrane Filter, GRIDDED - Type RGCN, RIVIERA

RGCN membranes are made of cellulose nitrate, a material which assures effective retention with high flow rates. These membranes are
useful for water microbiology. A grid is printed on the surface to facilitate colonies.
Features and Benefits : Applications :
• High Flow rates. • RGCN membranes are useful for water microbiology. The printed grid eases the counting of bacterial
• Non inhibiting ink grids. colonies, micro colonies etc, and in no way influences the growth of bacteria.
• Validated for microbial recovery.

Cat Porosity Dia No. of No. of Boxes Maximum

Base Sheets per Price
No. µm mm per Box Case Rs/Pc
75600 4722 0.22 47 100 10 2546.00
75600 4745 0.45 47 100 10 2546.00
75600 4780 0.80 47 100 10 2546.00

110
 ra
R iera
ie
iv
iv
R
Nylon - 66 Membrane Filter - Type RN, RIVIERA
Nylon membrane disc filter are double layered hydrophilic, non media migrating, biologically inert, flexible, durable, plain white absolute
membrane filter offering wide chemical compatibility.
Features and Benefits : Specifications :
• Absolute Retention • Retention Efficiency: 0.22 µm : LRV > 7 for Br. diminuta
• Wide chemical compatibility • Sterilisation: Autoclavable at 121°C
• Not extractable • Maximum Operating Temp: 80°C continuous
• High heat resistance • Maximum Operating Pressure: 5 kg/cm2
• Base of handling • Bio safety: Passes the Biological tests for Class VI plastics as described in USP.
• Oxidizable Matter: Passes as per USP.
Integrity Test Data
Pore size Wetting Bubble Point Water Flow Rate
Fluid
µm psi kg/cm2 ml/min/cm2 at ∆P=10psi at 20°C
0.22 Water 52 3.65 14.5
0.45 Water 33 2.32 38.5
0.80 Water 14 0.98 125

Cat Porosity Dia No. of No. of Boxes Maximum

Base Sheets per Price
No. µm mm per Box Case Rs/Pc
75500 4722 0.22 47 100 10 2225.00
75500 4745 0.45 47 100 10 2225.00
75500 4780 0.80 47 100 10 2225.00
Edge Hydrophobic Membrane Disc Filter, - Type REHCN, RIVIERA
REHCN Membranes are used for sterility testing of antibiotics & drugs containing bacteriostats. 6 mm rim is hydrophobic and rest of the
membrane is hydrophilic. The hydrophobic edge does not allow drug to seep under the rim of the filter holder. This ensures complete removal
of the drug during flushing so that growth of any micro-organisms which have been retained on the membrane is not inhibited due to the
residual drug, improving the sensitivity and reliability of the test.
Specifications :
• Sterilisation: Autoclavable at 121°C
• Maximum Operating Temp: 80°C continuous
• Maximum Operating Pressure: 5 kg/cm2
• Bio safety: Passes the Biological tests for Class VI plastics as described in USP.
• Oxidizable Matter: Passes as per USP.
Integrity Test Data
Pore size Wetting Bubble Point Water Flow Rate
Fluid
µm psi kg/cm2 ml/min/cm2 at ∆P=10psi at 20°C
0.45 Water 33 2.32 46

Cat Porosity Dia No. of No. of Boxes Maximum

Base Sheets per Price
No. µm mm per Box Case Rs/Pc
75700 4745 0.45 47 100 10 4455.00

111
 R era
ra
ie
i
iv
iv
R
Chemical Compatibility
Table below shows the chemical compatibility of various laboratory filtration products with some commonly used solvents. All
products were exposed to specified chemicals for 72 hours at 25°C.

Reagents Cellulose Nitrate Nylon 66

Solvents
Acetone N G
Acetonitrile N G
Benzone G G
Benzyl Alcohol N G
Benzyl Alcohol 4% F G
Diethyl Ether N G
Dimethyl Formamide N G
Ethyl Acetate N G
Ethylene Glycol N G
Hexane G G
Iso Propyl Alcohol G G
Methanol N G
Methylene Chloride G G
n-Butanol G G
Peanut Oil G G
Tetrahydrafuran/water(50:50) N G
Toluene F G
Trichloroethylene G G
Acids
Hydrochloric Acid 37% N N
Hydrochloric Acid 10 % G G
Nitric Acid 67% N N
Nitric Acid 7% G G
Sulphuric Acid 10% G G
Bases
Ammonium Hydroxide 25% N G
Sodium Hydroxide 32% N G
Potassium Hydroxide 32% N N
G : Good, N : Not recommended, F : Fair

112
solarus®
advanced
energy concept,
precision results
solarus® sets standards as the world’s
first digital burette with an integrated
solar cell. The power supply for the
electronics and display is derived
exclusively from an integrated solar
cell. Batteries can be completely
dispensed with.

Use of solarus® ensures that the term

“sustainable” is related directly to work
in the laboratory. The unique solar-
powered digital burette is powered
exclusively using photovoltaic. Power
is supplied to the solarus® electronics
via the solar cell at the rear. Charging
and changing of batteries, excessive
stand-by costs or returning the unit for
replacement of lithium cells are
therefore a thing of the past.

solarus ® exploits instead the

advantages of solar technology:
comfortable, simple, environmentally
friendly, inexhaustible and free. Use of
superior-quality solar cells ensures a
reliable power supply at all times, even
where lighting conditions are
restricted in the laboratory.

perfect ergonomics
For efficient, non-fatiguing work

maintenance-friendly
Easily replaceable valves

clear
Large, clearly legible display

inspected
Individual quality certificate,
conformity certificate

accurate
Manufacturer’s calibration
is permanently stored
solarus®
HiClass in digital titration
solarus® sets standards as the world’s first
digital burette with an integrated solar cell.
The power supply for the electronics and
display is derived exclusively from an
integrated solar cell. Batteries can be
completely dispensed with.

Easily replaceable valves, individual calibra-

tion with “Quick-Cal” and permanent storage
of the manufacturer’s calibration mean that
solarus® can be adapted rapidly and flexibly.
The vivid digital display prevents meniscus
reading errors and is always clearly legible, The Hirschmann recirculation Sensitive and precise
regardless of the viewing angle. The system Handwheels with a soft touch surface for a
handwheels with a soft touch surface are User, environmentally and budget friendly. firm hold enable sensitive titration via the
ergonomically optimised for particularly The comfortable Hirschmann recirculation precision and smooth-running gear
precise control. system facilitates rapid aeration without loss mechanism.
of reagent.
solarus® is available in a 10 ml, 20 ml and
50 ml version. Thanks to its innovative
technology, the solarus® 10 ml enables
titration of the smallest volumes with an
indicating range of 10 ìl to 99.99 ml in
10 ìl graduations. The ejection unit with a
fine tip is supplied as a standard component.

Solar technology
solarus® exploits the advantages of solar
technology: comfortable, simple, environ-
mentally friendly, inexhaustible and free.
Use of superior-quality solar cells ensures
a reliable power supply at all times, even
where lighting conditions are restricted in
the laboratory.
All-round rotation Always in sight
solarus® can be freely screwed as desired Clear, self-explanatory and user-friendly:
onto the bottle. The advantage: the labels or the display is clearly legible at all times,
labelled side of the bottle faces the user at regardless of the viewing angle, display
all times. This means that you can keep an 0.01 ml - 99.99 ml.
eye on everything.
Performance data
Titration graduations 10 ìl
Titration range 0.01 ml - 99.99 ml
Pistons Teflon compound ECTFE, PTFE
Cylinders Extremely inert and wear-free design made of calibrated DURAN® glass
Valves Extremely inert and wear-free design, ball and seat made of borosilicate glass, valve springs made of Hastelloy.
The valves can be easily removed and replaced using the fitting wrench (included in scope of delivery)
Plastic parts All parts which come into contact with the medium are made of highly resistant fluoroplastics
Valve block and valve housing made of ECTFE, FEP suction and ejection hose
Sterilisability Media-conveying components (including ejection unit) are suitable for steam sterilisation at 121°C
Breakage resistance Completely enclosed protective plastic jacket with clear inspection window protects against breakage
Test protocol Each instrument is individually tested, certified and bears a unique instrument number
Cat No. Article designation
939 20 10 solarus® 10 ml, R = 0.3%, CV = 0.1%
939 20 20 solarus® 20 ml, R = 0.2%, CV = 0.1%
939 20 50 solarus® 50 ml, R = 0.2%, CV = 0.1%
Accessories
958 40 05 RS232 connection cable
931 30 27 Ejection unit, flexible, spiral shaped
956 40 10 liqui-soft® Software for data transfer
 ra
ie
iv
R
Burette, Digital, Solar Powered, Conformity certified, with Individual Work Certificate, High Precision Digital Titrator for
exact and error - free Titration, SOLARUS, make HIRSCHMANN. The unit will be supplied complete with mounted
discharge unit and A45 female thread. 3 different adapters (A 32, A 30 & A 40), suction tube, return tube and wrench
Cat Capacity Accuracy Reproducibility Qty. Per Maximum
R≤± CV ≤ Pack Price
No. ml % % Pcs Rs/Pc
93920 10 10 0.3 0.1 1 91343.00
93920 20 20 0.2 0.1 1 91343.00
93920 50 50 0.2 0.1 1 91343.00

LABOPETTE, Fixed Volume, Conformity Certified with Individual Work Certificate, HIRSCHMANN

Cat Volume Accuracy Reproducibility Qty. Per Maximum

R≤± CV ≤ Pack Price
No. µl % % Pcs Rs/Pc
94755 01 5 2.5 1.5 1 16888.00
94755 02 10 1.2 0.8 1 16888.00
94755 03 20 1.0 0.5 1 16888.00
94755 04 25 1.0 0.5 1 16888.00
94755 05 50 1.0 0.4 1 16888.00
94755 06 100 0.8 0.3 1 16888.00
94755 07 200 0.8 0.3 1 16888.00
94755 08 250 0.8 0.3 1 16888.00
94755 09 500 0.8 0.3 1 16888.00
94755 10 1000 0.8 0.3 1 16888.00
94755 11 2000 0.8 0.3 1 16888.00
94755 12 5000 0.8 0.3 1 16888.00
94755 13 10 ml 0.6 0.3 1 16888.00
LABOPETTE, Variable Volume, Conformity Certified with Individual Work Certificate, HIRSCHMANN

Cat Volume Volume Accuracy Reproducibility Qty. Per Maximum

Division R≤± CV ≤ Pack Price
No. µl µl % % Pcs Rs/Pc
94754 00 0.1 - 3 0.002 4.0 2.0 1 23306.00
94754 01 0.5 - 10 0.01 1.2 0.8 1 23306.00
94754 06 2 - 20 0.02 1.0 0.5 1 23306.00
94754 07 10 - 100 0.1 0.8 0.3 1 23306.00
94754 08 20 - 200 0.2 0.8 0.3 1 23306.00
94754 09 100 - 1000 1.0 0.8 0.3 1 23306.00
94754 05 500 - 5000 10.0 0.8 0.3 1 23306.00
94754 04 1 - 10 ml 20.0 0.6 0.3 1 23306.00

LABOPETTE, Variable Volume, Multi Channel, Conformity Certified with Individual Work Certificate, HIRSCHMANN
Cat No. of Volume Volume Accuracy Reproducibility Qty. Per Maximum
Channels Division R≤± CV ≤ Pack Price
No. µl µl % % Rs/Pc
94756 01 8 0.5 - 10 0.01 2.4 1.6 1 97930.00
94756 02 8 10 - 100 0.1 1.6 0.6 1 97930.00
94756 04 8 30 - 300 0.2 1.6 0.6 1 97930.00
94757 01 12 0.5 - 10 0.01 2.4 1.6 1 116369.00
94757 02 12 10 - 100 0.1 1.6 0.6 1 116369.00
94757 04 12 30 - 300 0.2 1.6 0.6 1 116369.00

PIPETUS - Pipetting Device for All Conventional Glass Pipettes, HIRSCHMANN

Cat Equipment Operating Operating Accessories Qty. Per Maximum
Type Principle Range Supplied Pack Price
No. ml Pcs Rs/Pc
99020 00 Junior Manual 0.5 - 10 1 14032.00
99030 00 Standard Electrical 0.1 - 100 Elect. Pump 1 33418.00
99072 00 Akku Electrical 0.1 - 100 Bat. Charger 1 39772.00

115
 ra
ie
iv
R
Bottle Top Liquid Dispenser, with Ceramic Piston, Fixed Volume, Autoclavable at 1210 C, 2 Bar, Conformity Certified,
with Individual Number & Work Certificate, CERAMUS - CLASSIC FIX, make HIRSCHMANN.
Equipment shall be supplied complete with Thread A 32 mm, 3 thread adapters (A 28, S 40 & A 45), 1 screw coupled
suction tube and 1 discharge tube unit complete

Cat Volume Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc

93111 00 1 1 28713.00
93211 00 2 1 28713.00
93311 00 5 1 28713.00
93411 00 10 1 28713.00
93511 00 25 1 36609.00
93611 00 50 1 39713.00

Bottle Top Liquid Dispenser, with Ceramic Piston, Variable Volume, Autoclavable at 1210 C, 2 Bar, Conformity
Certified, with Individual Number & Work Certificate, CERAMUS - CLASSIC, make HIRSCHMANN.
Equipment shall be supplied complete with Thread A 32 mm, 3 thread adapters (A 28, S 40 & A 45), 1 screw coupled
suction tube and 1 discharge tube unit complete.

Cat Volume Qty. Per Maximum

Pack Price
No. ml Pcs Rs/Pc

93100 00 0.2 - 1 1 29065.00

93200 00 0.4 - 2 1 29065.00
93300 00 1.0 - 5 1 29065.00
93400 00 2.0 - 10 1 29065.00
93500 00 5.0 - 30 1 37993.00
93600 00 10.0 - 60 1 41421.00

Bottle Top Liquid Dispenser, Variable Volume, with Ceramic Piston & Reagent recirculation system, Autoclavable at
1210 C, 2 Bar, Conformity Certified, with Individual Number & Work Certificate, CERAMUS®, make HIRSCHMANN
Equipment shall be supplied suitable for A 45 mm Thread, 3 thread adapters (A 32, S 40 & A 38), 1 screw coupled suction
tube, recirculation tube, spanner and 1 discharge tube unit complete.

Cat Volume Volume Accuracy Reproducibility Qty. Per Maximum

Division Pack Price
No. ml ml R% CV% Pcs Rs/Pc

93120 00 0.2 - 1 0.05 0.6 0.2 1 36906.00

93220 00 0.4 - 2 0.05 0.5 0.1 1 36906.00
93320 00 1-5 0.10 0.5 0.1 1 36906.00
93420 00 2 - 10 0.25 0.5 0.1 1 36906.00
93520 00 5 - 30 0.50 0.5 0.1 1 39988.00
93620 00 10 - 60 1.00 0.5 0.1 1 42827.00

116
ceramus®
with unrivalled
ceramic piston

ceramus® classic
dispensing as perfect
as it could be
Pipette Stand

labopette®
HiClass in pipetting

pipetus®
HiClass in pipetting

pipetus® standard pipetus® junior

 ra
ie
iv
R
MICROPIPETTES, Fixed Volume, Single Channel, with Individual Work Certificate, RIVIERA
Recalibration required after each Autoclaving. Colour coded for easy identification. Calibration conforming to DIN 12650 &
EN-ISO 8655 standards ensuring high accuracy & precision. Calibration report with every pipette.
Cat Volume Qty. Per Maximum
Pack Price
No. µl Pcs Rs/Pc
77201 01 5 1 2100.00
77201 02 10 1 2100.00
77201 03 20 1 2100.00
77201 04 25 1 2100.00
77201 05 50 1 2100.00
77201 06 100 1 2100.00
77201 07 200 1 2100.00
77201 08 250 1 2100.00
77201 09 500 1 2100.00
77201 10 1000 1 2100.00
77201 11 2000 1 2745.00
77201 12 5000 1 2745.00
77201 13 10000 1 2745.00

MICROPIPETTES, Variable Volume, Single Channel, with Individual Work Certificate, RIVIERA
Recalibration required after each Autoclaving. Colour coded for easy identification. Calibration conforming to DIN 12650 &
EN-ISO 8655 standards ensuring high accuracy & precision. Calibration report with every pipette.

Cat Volume Volume Qty. Per Maximum

Division Pack Price
No. µl µl Pcs Rs/Pc
77301 01 0.5 - 10 0.1 1 3845.00
77301 02 5 - 50 0.5 1 3845.00
77301 03 50 - 200 1.0 1 3845.00
77301 04 200 - 1000 5.0 1 3845.00
77301 05 10 - 100 0.5 1 3845.00
77301 06 100 - 1000 5.0 1 3845.00
77301 07 2 - 20 0.1 1 3845.00
77301 08 20 - 200 1.0 1 3845.00
77301 09 1000 - 5000 50.0 1 4490.00
77301 10 1000 - 10000 100.0 1 4490.00

Plastic Stand for Micro Pipettors

Cat To Hold Qty. Per Maximum
No. of Pack Price
No. Micro Pipettor Pcs Rs/Pc
77500 001 4 1 1905.00
77500 002 6 1 2260.00

119
 ra
ie
iv
R
MICROPIPETTES, Fixed Volume, Single Channel, Fully Autoclavable, with Individual Work Certificate, RIVIERA +
Does not require recalibration after Autoclaving.Fully Autoclavable since material of construction of body is high grade engineering
plastics.Colour coded for easy identification. Calibration conforming to DIN 12650 & EN-ISO 8655 standards ensuring high
accuracy & precision. Calibration report with every pipette.
Cat Volume Qty. Per Maximum
Pack Price
No. µl Pcs Rs/Pc
77200 01 5 1 3265.00
77200 02 10 1 3265.00
77200 03 20 1 3265.00
77200 04 25 1 3265.00
77200 05 50 1 3265.00
77200 06 100 1 3265.00
77200 07 200 1 3265.00
77200 08 250 1 3265.00
77200 09 500 1 3265.00
77200 10 1000 1 3265.00
77200 11 2000 1 3910.00
77200 12 5000 1 3910.00
77200 13 10000 1 3910.00

MICROPIPETTES, Variable Volume, Single Channel, Fully Autoclavable, with Individual Work Certificate, RIVIERA +
Does not require recalibration after Autoclaving.Fully Autoclavable since material of construction of body is high grade engineering
plastics.Colour coded for easy identification. Calibration conforming to DIN 12650 & EN-ISO 8655 standards ensuring high
accuracy & precision. Calibration report with every pipette.

Cat Volume Volume Qty. Per Maximum

Division Pack Price
No. µl µl Pcs Rs/Pc
77300 01 0.5 - 10 0.1 1 5010.00
77300 02 5 - 50 0.5 1 5010.00
77300 03 50 - 200 1.0 1 5010.00
77300 04 200 - 1000 5.0 1 5010.00
77300 05 10 - 100 0.5 1 5010.00
77300 06 100 - 1000 5.0 1 5010.00
77300 07 2 - 20 0.1 1 5010.00
77300 08 20 - 200 1.0 1 5010.00
77300 09 1000 - 5000 50.0 1 5655.00
77300 10 1000 - 10000 100.0 1 5655.00

Plastic Micro-Pipette Tips, Universal Type

Cat Capacity Compatible with Qty Maximum

Range Micro-Pipette per Price
No. µl Pack Rs/Pack

77400 001 0.5 - 20 77301 01, 77301 07, 77300 01, 77300 07 1000 595.00
77400 002 0.5 - 200 77200 01, 77200 02, 77200 03, 77200 04, 1000 480.00
77200 05, 77200 06, 77200 07, 77201 01,
77201 02, 77201 03, 77201 04, 77201 05,
77201 06, 77201 07, 77300 02, 77300 03,
77300 05, 77300 08, 77301 02, 77301 03,
77301 05, 77301 08
77400 003 100 - 1000 77200 08, 77200 09, 77200 10, 77300 04 1000 760.00
77300 06, 77201 08, 77201 09, 77201 10
77301 04, 77301 06
77400 004 1000 - 5000 77200 11, 77200 12, 77300 09, 77201 11 100 875.00
77201 12, 77301 09
77400 005 1000 - 10000 77201 13, 77301 10, 77200 13, 77300 10 100 1915.00

120
 ra
ie
iv
Pipette Controller - RIVIERA

Main Features
 Easy to use Operating Knobs
 Powerful Pump
 Double Safety Valve and Hydrophobic Filters
• Just 4 seconds to fill a 25ml Pipette
• No fluid penetration ensured by Double Safety Valve and Hydrophobic Filters
• Fast and Slow Speed modes
• Excellent Control of Speed through finger pressure control
• Low Battery Indicator
• Power through Cadmium free Batteries -
Environment friendly – 2 x 1.2V/1000mAh NiMH batteries.
Can be used continuously for 8 hrs. Battery Charging 2-3 hrs.
• Range of Pipette volume from 0.1 ml to 200ml
Accessories available with the Controller
 Battery Charger
 Hydrophobic PTFE membrane filter 0.45 µm 1pc
 Hydrophobic PTFE membrane filter 0.20 µm 1pc
 Wall mounting stand with screw

Pipette Controller, RIVIERA

Cat Equipment Operating Operating Accessories Qty. Per Maximum

Type Principle Range Supplied Pack Price
No. ml Pcs Rs/Pc

77510 000 Pipette Controller Electrical 0.1 - 200 As above 1 10525.00

121
 Bottle Top Dispenser - RIVIERA NEW

Without Recirculation With Recirculation

Features :
• Ergonomic Design enables low pressure dispensing for even larger volumes
• Dual graduation marks enable precise volume setting & visibility from both sides
• Unique piston mechanism allows cleaning & servicing of piston cylinder without disturbing calibration
• Volume lock ensures any accidental discharge
• Spring-less valve design offers high-chemical resistance and long-life with minimal maintenance
• Telescopic filling tube suitable for different sizes of Bottles
• Discharge tube with 360° rotation makes it convenient to dispense in multiple vessels
• The device comes with 4 additional adapters for most common bottle sizes (28mm, 38mm, 40mm, 45mm)
• The device can be easily calibrated with a single tool
• Calibrated as per ISO 8655 standard. Provided with individual calibration certificate

Bottle Top Dispenser, without Recirculation, RIVIERA

Cat Recirculation Volume Volume Accuracy Repeat- Qty Pack Maximum

Range Division % ability Per Price
No. ml ml % Pcs. Rs. / Pc.
78600 0025 No 0.25 - 2.5 0.05 0.6 0.2 1 11840.00
78600 0050 No 0.5 - 5 0.10 0.5 0.2 1 11840.00
78600 0100 No 1- 10 0.20 0.5 0.2 1 11840.00
78600 0250 No 2.5 - 25 0.50 0.5 0.2 1 17440.00
78600 0300 No 2.5 - 30 0.50 0.5 0.2 1 17440.00
78600 0500 No 5 - 50 1.00 0.5 0.2 1 17440.00
78600 0600 No 5 - 60 1.00 0.5 0.2 1 17440.00

Bottle Top Dispenser, with RecirculationRIVIERA

Cat Recirculation Volume Volume Accuracy Repeat- Qty Pack Maximum

Range Division % ability Per Price
No. ml ml % Pcs. Rs. / Pc.
78700 0025 Yes 0.25 - 2.5 0.05 0.6 0.2 1 15930.00
78700 0050 Yes 0.5 - 5 0.10 0.5 0.2 1 15930.00
78700 0100 Yes 1- 10 0.20 0.5 0.2 1 15930.00
78700 0250 Yes 2.5 - 25 0.50 0.5 0.2 1 21530.00
78700 0300 Yes 2.5 - 30 0.50 0.5 0.2 1 21530.00
78700 0500 Yes 5 - 50 1.00 0.5 0.2 1 21530.00
78700 0600 Yes 5 - 60 1.00 0.5 0.2 1 21530.00

122

 
  &'*+',-..& &'+',...&

  
 


 
  

  
 
 
 
  

 
 

 


  


 

 

  !"

!  #$%&'(&

! )*!++

#
$  ,))!



 /&
, '
,

 -.*/*

*0*1

" (#23

! $#$#

 4 4

%&!'&(#$)


# #
&/ ! 
%

)
 
  

&'*+',-..& 9.7-
$$ 
 !"# $ %$&
!! ($$$)$$
'

 
 

&'+',...& 9.77
$$ ( $$$)$$
!"# $ %$&
!!'


0&
##(0(

1 
#

 23
#




# #
& ! 
%

) 
# #
& ! 
%

)
&'4.,.5 9.78$$ 
  *$$)$$ &'4.5.5 9.79$$ 
  +,$$)$$

&'4.,.6 9.78$$ 

  +,$$)$$ &'4.5.6 9.79$$ 
  %$$)$$

&'4.,.4 9.78$$+

  +,$$)$$ &'4.5.4 9.79$$+

  %$$)$$

&'4.,.- 9.78$$ 

  +,$$)$$ &'4.5.- 9.79$$ 
  %$$)$$

&'4.,.7 9.78$$% 

  +,$$)$$ &'4.5.7 9.79$$% 
  ( $$)$$

&'4.,.8 9.78$$, 

  %$$)$$ &'4.5.8 9.79$$, 

  %$$)$$


 (#&<0#
+00 (
(#$<((

&'+'7..&

:
;


 !"#$
"%& 
'"(

'!
)*&)((&&


+(*+,
(-&./(,(#(0+)&.&( &.0)
*+&)(*((0,(*+(*
 1&)
*)&&.)(*(
*)&&.#2$,


 
  &'+'7..&
5
6!7
 2
,).
+8+! 
5
6!))
)9 
5
6!7,

9 
*!)))
)9 
*!)7,

9 

9'!  "

9 "
5
6! 


'!) 
,
&,
9 ;$ '(&
&) )*!++
:, -.,7,
*8 (3<=
%&!'&(#$)


# #
&/ ! 
%

)

/
  
$'
"-. .,$$- 9.7=$$ +,$$$)$$
'
!"# $ %$&


S C I E N T I F I C EUTECH™

Deluxe to Standard Bench pH Meters To Suit Your Pocket

Work Better And Faster

Experience Results

Deluxe Bench pH/mV/0C/0F Meter ……..

Perfect Choice For QC,
R&D Laboratories, Productions Plants

} Fulfill Your Requirement For 5 Point Calibration, GLP & Printer

Password Protection for Setup and Calibration ECPH27005E-P, pH Meter With
Special pH Electrode EC620131 & Printer

Features :
— Up to 6-point calibration with auto-buffer recognition
— Non-volatile memory holds up to 500 data points-time
and date-stamped for GLP compliance
— Cal-due alarm-no more out-dated calibrations!
— Bi-directional RS232 for easy data transfer to computer
— Password protection for setup and calibration

ECPH27005E, pH Meter With

Special Electrode EC620131
1

User-friendly & accurate Standard Bench pH/mV/0C/0F Meter

} Ideal choice for 5 point calibration requirements in

Laboratories, productions plants
Features :
— Large, comprehensive screen that displays readings, calibration points
— and electrode indicator
— Ready indicator alerts when readings are stable
— Up to 5-point push button calibration with auto-buffer recognition
ECPH70042GS with special — Non-volatile memory holds up to 100 data points
pH electrode EC620131 — Integral electrode holder

1
S C I EN T I F I C
EUTECH™
M odels ECPH70042S ECPH70042GS ECPH27005E ECPH27005E-P

Bench M eters
pH/mV/Temperature

0 0 0 0
M easuring Parameter pH /mV/ C / F pH /mV/ C / F
Range -2.00 to 16.00 pH -2.000 to 20.000 pH
pH Resolution 0.01 pH 0.1 / 0.01/ 0.001 pH (selectable)
Accuracy ± 0.01 pH ± 0.002 pH + 1 LSD
Range ± 2000 mV ± 2000 mV

ORP Resolution 0.1 (± 199.9 mV) / 1 mV (beyond) 0.1 mV

Accuracy ± 0.2(± 199.9 mV) / ± 2 mV (beyond) ± 0.2 mV
0 0 0 0
Range 0.0 to 100.0 C (32.0 to 212.0 F) 0.0 to 100.0 C (32.0 to 212.0 F)
0 0 0 0
Temp. Range Resolution 0.1 C /0.1 F 0.1 C /0.1 F
0 0 0 0 0 0
Accuracy ± 0.3 C / ± 0.5 F (0 to 70 C) ± 0.3 C /± 0.5 F (0 t o 70 C)
0 0
ATC /M TC 0 to 100 C (pH only) 0 to 100 C (pH only)

USA ( pH 1.68, 4.01, 7.00, 10.01,12.45) USA, NIST, DIN,

Buffer Options
NIST (1.68, 4.01, 6.86, 9.18, 12.45) User 1, User 2, Custom

No. of pH Calibration Points 5 points 6 points

Built-in Elect rode Arm Yes Yes

M emory 100 Data sets 500 Data sets

GLP --- Yes

DC socket, BNC, 2.5 mm phono (ATC), DC socket , BNC, 2.5 mm phono (ATC),
Input
phono (reference) phono (reference), phono (RS232)

Out put --- RS 232C (via cable)

Included AN-270
Printer --- ---
Dot M atrix Printer
Included Included
Electrode Included EC620131
ECFC7252101B EC620131

Temperature Probe Included PH5TEM B01P

Pow er Requirements Included, 100 /240VAC SM PS Pow er Adapter, Included, 100 /240VAC SM PS Pow er Adapter, 9V,6W
9V,6W, CENTRE + ve
Dimensions M et er 17.5 (L) x 15.5 (W) x 6.9 (H) cm ; 650 g
(LxWxH);Weight Boxed 30.8 (L) x 23.5 (W) x 12.4 (H) cm ; 1800 g

Product Code Cat No Description

pH 700 meter w ith plastic body, open pore pH electrode ECFC7252101B, ATC Probe PH5TEMB01P,
ECPH70042S 8042 006 38700.00
integral electrode holder & 100/240 VAC Adapter (ORP Electrode to be ordered separately)
pH 700 meter w ith glass body, open pore pH electrode EC620131, ATC Probe PH5TEMB01P, integral electrode holder &
ECPH70042GS 8042 007 50400.00
100/240 VAC Adapter (ORP Electrode to be ordered separately)
pH 2700 meter w ith glass body, open pore pH electrode EC620131, ATC Probe PH5TEMB01P, integral electrode holder,
ECPH27005E 8057 013 70200.00
100/240 VAC Adapter and RS232 cable (ORP Electrode to be ordered separately)
pH 2700 meter w ith glass body, open pore pH electrode EC620131, ATC Probe PH5TEMB01P, integral electrode holder,
ECPH27005E-P 8057 014 99000.00
100/240 VAC Adapter, RS232 cable and AN-270 Dot Matrix Printer (ORP Electrode to be ordered separately)
EC620131 8034 015 Glass-body pH combination electrode, reference double junction ,Ag/AgCl Sealed, 12 x 120 mm, BNC connector, 1m cable length 19800.00

ECFC7960101B 8052 007 General purpose plastic-body single junction gel-filled ORP electrode, 12 x 90mm, BNC connector, 1m cable length 19800.00

ECFC7960201B 8052 008 General purpose plastic-body double junction gel-filled ORP electrode, 12 x 90mm, BNC connector, 1m cable length 20700.00

AN-270 8057 015 Dot Matrix Printer, Brand ANTECH 33300.00

ECPH5TEMB01P 8034 003 ATC Probe (for Tutor, pH 510, pH 700, Ion 700, pH 2700, Ion 2700), 1m cable length 7200.00

127
 Bench Meters

Models ECPC70043S ECCON70043S

Bench Meters,
Conductivity &
Multi-parameter Meters

Measuring Parameter pH/ mV/ CONDUCTIVITY / TDS / TEMP Conductivity/ TDS / TEMP

Highlights Large LCD Display Large LCD Display

Range -2.00 to 16.00 pH -

Resolution 0.01 pH -
pH
Accuracy ± 0.01 pH -
Calibration Points Up to 5
-
Range ± 2000 mV -
ORP Resolution 0.1 mV (± 199.9 mV) / 1 mV (beyond) -
Accuracy ± 0.2 mV (± 199.9 mV) / ± 2 mV (beyond) -
Range 0.01 to 200.0 mS/ cm
Resolution 0.01 µS; 0.1 µS ; 1 µS ; 0.01 mS ; 0.1 mS *
Conductivity Accuracy ± 1% Full scale
Calibration Points Up to 5
Cell Constant 0.1 / 1.0 / 10.0
Range 0.01 to 100 ppt @0.5 TDS factor (to 200 ppt @ 1.0 TDS factor)
Resolution 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt #
TDS
Accuracy ± 1% Full Scale + 1 digit
Calibration Points Up to 5
Range 0.0 to 100.0 ºC / 32.0 to 212.0 ºF
Resolution 0.1 ºC / 0.1 ºF
Temperature
Accuracy ± 0.5 ºC / ± 0.9 ºF
Compensation ATC/ MTC
Display Custom Dual Display LCD (5.6 x 7.5 cm)
Memory 100 Data sets
Meter Electrode Arm Yes, Built-in
Features Temperature Coefficient 0.00 to 10.00%
Temperature Normalization 15 TO 30 ºC
Power Requirements 9 V DC Adapter, 500 mA (220 VAC)
Included, ECFC7252101B, pH electrode and
Standard CONSEN9501D, ultem body Cond./ TDS electrode, Included, ultem body ECCONSEN9501D,
Electrode
Supply cell const. 1.0 , both 1 m cable. cell constant 1.0, 1 m cable
ORP electrode to be ordered separately
Dimensions 17.5 x 15.5 x 6.9 cm ; 650 g
Meter
(LxWxH) ;
Weight Boxed 30.8 x 23.5 x 12.4 cm ; 1800 g

* 1 mS = 1000 µS/ cm, # 1 ppt = 1000 ppm

Product Code Cat No. Description Price Rs./ Pc.

ECPC70043S 8050 012 Eutech PC 700 Meter With pH Electrode (ECFC7252101B), Conductivity Probe 82800.00
(CONSEN9501D) & include 100/240 VAC pow er adapter and an integral electrode holder.

ECCON70043S 8050 009 EUTECH CON700 meter w ith Conductivity/ ATC Probe (ECCONSEN9501D), 61200.00
Integral Electrode Holder & pow er Adapter

OPTIONAL ACCESSORIES

General purpose plastic body double junction gel-filled ORP Electrode, 12x 90mm,
ECFC7960201B 8052 008 20700.00
BNC Connector 1 meter cable length

ECCONSEN9501D 8050 010 Conductivity Electrode Ultem-body, ATC, Cell Constant= 1.0, 16 x 144mm, 1 m cable 24300.00

128
 Cat No.

8042 002 38700.00

8042 003 36000.00

OPTIONAL ACCESSORIES

8034 004 5580.00

8034 009 2250.00

8052 008 20700.00

8052 007 19800.00

8034 003 7200.00

8050 007 3960.00

130
 Conductivity/ TDS | Handheld Meters

ECCONWP15003K ECCON603PLUSK ECTDS603PLUSK

Conductivity/
TDS
Handheld Meters
Specifications

Measuring Parameter Conductivity/ TDS/ ºC Conductivity/ ºC TDS/ / ºC

0- 19.99, 19.9-199.9, 199- 1999 µS/ cm;

Range 0 to 200 mS -
2.00- 19.99, 20.0 - 199.9 mS/ cm
Conductivity
Resolution 0.01, 0.1, 1 µS/ cm ; 0.01 , 0.1 mS/ cm;
0.01 µS to 0.1mS -
(0.05% of full scale)
Accuracy ± 1% of full scale -
0- 9.99, 10-99.9, 100-999 ppm;
0 to 200 ppt -
Range 1.0-9.99 , 10- 99.9 ppt

TDS Resolution 0.01 ppm to 0.1 ppt - 0.01, 0.1 ,1 ppm; 0.01,0 .1 ppt (0.05% of full scale )

Accuracy ± 1% of full scale - ± 1% of full scale

TDS Factor 1.0 - 0.4 to 1.0
Calibration Auto/ Manual (Conductivity), 4 points (1 per range auto),
5 points (1 per range manual)
Points Manual (TDS; 1 point per range) 5 points (1 per range manual)
0
Range -10.0 to 110.0° C (14.0 to 230.0 ºF) 0.0 to 100 C ( 32 to 212 ºF)
0
Resolution 0.1 C / 0.1 ºF
0
Accuracy ± 0.5 C / ± 0.9 ºF
Temperature Compensation Automatic/ Manual from -10 to 110 ºC ATC/ MTC (0 to 80.0 ºC)
Normalization 20 or 25 ºC
Temp. Coefficient 0.0- 10.0% 0.0- 10.0% 0.0- 3.0%
Cell Constant 0.1,1.0,10.0 -
Memory Up to 150 data sets -
Operating
Meter 0 to 50 ºC
Temperature
Features
LCD Display Three line custom LCD Single display LCD (4.5 x2.3 cm)
Power 2x1.5VAA batteries (included),
4 x 1.5 V 'AAA' alkaline batteries
Requirements AC Adapter (Optional)

Dimensions Meter 20 x 8.3 x 5.7 cm; 0.5kg 15.7 x 8.5 x 4.2 cm/ 255g
(L x W x H);
Weight Boxed 23 x 23 x 7 cm; 0.7kg 36 x 28 x 8 cm/ 1555 g

Product Code Cat No. Description Price Rs./ Pc.

ECCONWP15003K 8050 002 CON150 meter, Conductivity cell (K= 1.0), Grip-Clip, tw o AA batteries, 45000.00
hard carry case, calibration solutions
ECCON603PLUSK 8050 001 COND 6+ Conductivity Meter w ith electrode ECCONSEN91B & 37800.00
Conductivity carrying kit set
ECTDS603PLUSK 8051 001 TDS 6+ TDS Meter w ith electrode ECCONSEN91B & TDS carrying kit set 37800.00
Optional Accessories
ECCONSEN91B 8050 003 2 Stainless Steel Rings Ultem-body Electrode w ith ATC, cell constant K= 1.0, 22500.00
16x144 mm, BNC connector, 1m cable length (for CON 6+ , TDS 6+ , Salt 6+ )
ECCONSEN91W 8050 004 2 Stainless Steel Rings Ultem-body Electrode w ith ATC, cell constant K= 1.0, 22500.00
16x144 mm, 6-pin connector, 1m cable length (for CON 150)
ECCONSEN72W 8050 005 2 Platinum Rings Epoxy-body Electrode w ith ATC, cell constant K= 0.1, 37800.00
16x110 mm, 6-pin connector, 1m cable length (for CON 150)
ECCONSEN92W 8050 006 2-Cell Conductivity/ATC Electrode, 10.0 cell constant,
Platinum Sensor, Epoxy-Body ( for CON 150) 25200.00

60x426 401 8050 011 100 /240VAC SMPS Pow er Adapter w ith US/UK/EUR/Japan plug ,
9V,6W, Centre + ve ( for CON 150) 7200.00

131
 pH/ ORP | Handheld Meters

CyberScan Dual-Display EcoScan Single-Display

ECPHWP15002K ECPH602PLUSK
pH/ ORP
Handheld Meters
Specifications

Measuring Parameter pH/ ORP/ ºC

Range -2.00 to 16.00 pH 0.00 to 14.00 pH
Resolution 0.01 pH
Accuracy ± 0.01 pH
pH Calibration Up to 5 points (USA/ NIST),
Up to 3
Points Up to 6 points (DIN)

USA (pH 4.01,7.00, 10.01)

USA(1.68, 4.01, 7.00, 10.01, 12.45),
Buffer Sets NIST(pH 4.01, 6.86, 9.18)
NIST (1.68, 4.01, 6.86, 9.18, 12.45), DIN
Pb (pH 4,10, 6.97)

Range ± 2000 (Electrode optional) ± 1000 mV

Resolution 0.1mV up to ± 999; 1 mV beyond 0. 1 mV(+ 199.9mV ) ;1 mV ( > + 199.9mV )
ORP ± 0.2mV + 2LSD or + 0.5% of reading;
Accuracy + 0.2mV (+ 199.9mV);2 mV (> + 199.9mV)
whichever is greater
Calibration ± 200mV –
Temperature Range -10.0 to 110.0 ºC(14.0 to 230.0 ºF) 0.0 to 100.0 ºC
Resolution 0.1 ºC / 0.1 ºF 0.1 ºC
Accuracy ± 0.5 ºC / ± 0.9 ºC ± 0.5 ºC
Temperature
ATC/ MTC ATC/ MTC (0 to 100 ºC)
Compensation
Meter
Memory Up to 150 Data sets –
Features
Power 2x1.5VAA batteries(included)
4x 1.5 V ‘AAA’ Alkaline batteries
Requirements or ACAdapter (Optional)
Meter
20 x 8.3 x 5.7 cm; 0.5 kg 15.7 x 8.5 x 4.2 cm; 255 g
Dimensions
(LxWxH) ;
Weight 23 x 23 x 7 cm; 0.7 kg 36 x 28 x 8 cm; 1555 g
Boxed

Product Code Cat No. Description Price Rs./ Pc.

TM
ECPHWP15002K 8052 003 pH 150 Meter w ith double-junction pH electrode & ATC probe, Grip-Clip , tw o AA batteries, 41400.00
hard carry case, pH buffers, storage solution, rinse solution
ECPH602PLUSK 8052 002 pH 6+ pH/ORP Meter w ith single junction pH electrode ECFC7252101B, 36000.00
ATC probe & pH carrying kit set
Optional Accessories
ECPH5TEM01P 8052 004 ATC probe (for pH 6+ , pH 5+ , pH 150 only); 1m cable length 6750.00
ECFC7252101B 8034 004 General Purpose Plastic-body Single Junction Gel-Filled pH Combination Electrode, 12x90mm, 5580.00
BNC connector, 1m cable length
ECFC7252201B 8052 006 General Purpose Plastic-body Double Junction Gel-Filled pH Combination Electrode, 8730.00
12x90mm, BNC connector, 1m cable length
ECFC7960101B 8052 007 General Purpose Plastic-body Single Junction Gel-Filled ORP Electrode, 12x90mm, 19800.00
BNC connector, 1m cable length
ECFC7960201B 8052 008 General Purpose Plastic-body Double Junction Gel-Filled ORP Electrode, 12x90mm, 20700.00
BNC connector, 1m cable length

60x426 401 8050 011 100 /240VAC SMPS Pow er Adapter w ith US/UK/EUR/Japan plug, 9V,6W, 7200.00
CENTRE + ve ( for pH 150 )

132
 pH & Conductivity Handheld Meters
with PC Interface

ECPHWP45002K ECCONWP45003K
pH & Conductivity
Handheld Meters
with PC Interface
Specifications

Measuring Parameter pH / mV / ION / ºC Conductivity / TDS / Salinity / ºC

Range -2.00 to 16.00 pH —
Resolution 0.01 pH —
pH Accuracy ± 0.01 pH —
Calibration Up to 6 points
—
Points (USA ,NIST,DIN Custom)
Range ± 2000 mV —
Resolution 0.1 mV ± 999.9 mV; 1 mV beyond —
mv ± 0.2 mV + 2 LSD or + 0.5 % of reading;
Accuracy —
whichever is greater
Calibration ± 200mV —
Range 0.0 to 2000 ppm —
Resolution 0.01/ 0.1/ 1 ppm —
ION Accuracy ± 0.5 % full scale (monovalent); ± 1% full scale (divalent); —
Calibration From 2-4 or 2-5 points; 0.10, 1.00, 10.0, 100.0 & 1000 /
—
Points 0.20, 2.00, 20.0, 200.0 & 2000 / 0.50, 5.00, 50.0 & 500.0
Range — 0 to 200 mS
Resolution — 0.01 µS to 0.1 mS
Conductivity
Accuracy — ± 1% full scale
Calibration — Auto/ manual;1 point/ range
Range — 0 to 200 ppt (TDS factor 1.0)
Resolution — 0.01 ppm to 0.1 ppt
TDS
Accuracy — ± 1% full scale
Calibration — Manual; 1 point/ range
Range -10.0 to 110.0 ºC (14.0 to 230.0 ºF)
Resolution 0.1 ºC/ ºF
Temperature
Accuracy ± 0.5 ºC; ± 0.9 ºF
Calibration Offset in 0.1 increments, ± 10 ºC or ± 18 ºF
Display Custom LCD with backlight
Memory Stores up to 500 data sets
Output USB , RS232 output with optional data cable
Real-Time Clock Time and date stamp on Calibration and stored data
Power Two AA batteries (included), AC adapter (optional)

Dimensions Meter 20 x 8.3 x 5.7 cm; 0.5 kg

(LxWxH) ;
Weight Boxed 23 x 23 x 7 cm; 0.7 kg

Product Code Cat No. Description Price Rs./ Pc.

ECPHWP45002K 8052 015 pH 450 Meter Kit w ith double-junction pH electrode ECFC7252201B and ATC probe, Grip-Clip™, 54000.00
tw o AA batteries, hard carry case, USB cable, pH buffers, storage solution, rinse solution.
ORP electrode & ION electrode to be ordered separately.
ECCONWP45003K 8050 015 CON 450 Meter Kit, conductivity cell ECCONSEN91W (K = 1.0), Grip-Clip™, 69300.00
tw o AA batteries, hard carry case, USB cable, calibration solutions
Optional Accessories
ECFC7252201B 8052 006 General Purpose Plastic-body Double Junction Gel-Filled pH Combination Electrode, 8730.00
12x90mm, BNC connector, 1m cable length
ECFC7960201B 8052 008 General Purpose Plastic-body Double Junction Gel-Filled ORP Electrode, 12x90mm, 20700.00
BNC connector, 1m cable length
ECCONSEN91W 8050 004 2 Stainless Steel Rings Ultem-body Electrode w ith ATC, cell constant K= 1.0, 22500.00
16x144 mm, 6-pin connector, 1m cable length
ECCONSEN72W 8050 005 2 Platinum Rings Epoxy-body Electrode w ith ATC, cell constant K= 0.1, 37800.00
16x110 mm, 6-pin connector, 1m cable length
ECCONSEN92W 8050 006 2-Cell Conductivity/ATC Electrode, 10.0 cell constant, 25200.00
Platinum Sensor, Epoxy-Body
60x426 401 8050 011 100 /240VAC SMPS Pow er Adapter w ith US/UK/EUR/Japan plug, 9V,6W, 7200.00
Centre + ve

133
 Salinity | Pocket Tester & Handheld

Protective rubber
Unlike other boot doubles up
conventional testers, as stand
the SaltTestr®11 IP54-rated housing
offers ± 1 % full protects against
scale accuracy water splashes

Splashproof keypad
More User-Friendly
• Direct temperature readout in ° C and ° F
• Measures in ppt & %
• Large screen display
• Quick and easy push-button calibration
• Battery-level indicator
• User customisation for normalisation
• Non-volatile memory
temperature and temperature coefficient
High Accuracy
• Electrode with built-in ATC designed for minimal
• ± 1 % full scale accuracy
air bubble entrapment during measurement
• Automatic Temperature Compensation (ATC)
• Rugged all-in-one meter kit available
More Savings
• Other features include: HOLD function,
• Replaceable sensors
auto-off, self-diagnostics
• Advanced power-conserving design

ECSALT603PLUSK SALTTEST11
Salinity
Pocket Tester
& Handheld
Meter
Specifications
Measuring Parameter Salinity/ ºC
Highlights High accuracy and wide range Salinity measurements Large dual-display
Range 1.0 to 50.0 ppt/ 0.1 to 5.00 % 0 to 10.00 ppt*
Resolution 0.1 ppt/ 0.01 % 0.10 ppt
Salinity
Accuracy ± 1 % Full scale
(TDS)/ %
Calibration
1(manual)
Point
Range -10.0 to 110.0 ºC 0 to 50 ºC/ 32 to 122 ºF
0
Resolution 0.1 ºC 0.1 C / 0.1 ºF
Accuracy ± 0.5 ºC ± 0.5 ºC / ± 0.9 ºF
Temperature Compensation ATC
Coefficient
0.0- 3.0% 2%
(Per ºC)
Normalization 20.0 or 25.0 ºC 25.0 ºC
Auto-Off 20 Mins after last key pressed 8.5 Mins after last key pressed
Meter
Waterproof
Features No Yes
(IP67)
Power Requirements 4x 1.5 V ‘AAA’ Batteries 4x 1.5 V ‘A76’ Micro alkaline batteries
LCD Display Dual display LCD (4.5 x2.3 cm) Single display LCD (2.1 x2.7 cm)
Dimensions Meter 15.7x 8.5x 4.2 cm/ 255g 16.5x 3.8cm/ 90g
(LxWxH);
Boxed 36x 28 x 8 cm/ 1555 g 18.5x6.5x5 cm/ 200 g
Weight
* 1 ppt = 1000 ppm (ppm: parts per million / ppt: parts per thousand)

Product Code Cat No. Description Price Rs./ Pc.

ECSALT603PLUSK 8003 007 Salt 6+ Salinity Meter w ith electrode ECCONSEN91B & Salinity carrying kit set 37800.00

SALTTEST11 8003 006 Waterproof SaltTestr 11 large display tester 14400.00

Optional Accessories
ECCONSEN91B 8050 003 2 Stainless Steel Rings Ultem-body Electrode w ith ATC, cell constant K= 1.0,
16x144 mm, BNC connector, 1m cable length (for CON 6+ , TDS 6+ , Salt 6+ ) 22500.00

ECTDSSENSOR 8014 007 Replacement sensor for w aterproof SaltTestr 11 & SaltTestr, 2-pin type 3960.00

134
 ATC
MEAS

pH
7.00 C

26.9

CyberScan pH Tutor pH/°c

 pH Bench Meters

pH Tutor

Order Code ECPHTUTOR-DS ECPHTUTOR-D ECPHTUTOR-S ECPHTUTOR-I

EUTECH “3-in-1” EUTECH “3-in-1” Indigeneous

Measuring Parameter EUTECH Electrode
pH/ ºC pH/ Temp pH/ Temp pH Electrode
pH Electrode Order Code
Order Code Order Code Order Code
ECFC7252101B
Dual display ECFC7352901B ECFC7352901B AN-786-1
Highlights
standard bench
EUTECH Indigeneous Indigeneous Indigeneous
Range 0.00 to 14.00 pH Stand electrode stand electrode stand electrode stand electrode stand
Resolution 0.01pH
Accuracy
with swivel arm
± 0.01pH
pH
Calibration
Up to 3
Points
Buffer Sets USA, NIST
Range 0 to 100ºC
Temperature Resolution 0.1 ºC
Accuracy ± 0.3 ºC
Temperature 0
ATC/ MTC (0 to 100 C)
Compensation

Meter Input BNC, phono

Features

Power 9 V DC Adapter, 500 mA

Requirements (220 VAC)

Dimensions Meter 23 x 18 x 6 cm ; 570 g

(LxWxH) ;
Weight Boxed 40 x 26 x 9 cm ; 1200 g

Product Code Cat No. Description Price Rs./ Pc.

CyberScan pH Tutor meter w ith plastic-body “ 3-in-1” pH/Temp.(ATC in-built)
ECPHTUTOR-DS 8034 011 combination electrode, 12x90mm, BNC connector, 1m cable length, 30600.00
integrated electrode stand w ith sw ivel arm and pow er adapter

Cyberscan pH tutor pH meter w ith plastic-body “ 3-in-1” pH/Temp.(ATC in-built)

ECPHTUTOR-D 8034 001 ECFC7352901combination electrode, 12x90mm, BNC connector, 1m cable length, 26100.00
indigenous electrode holder and pow er adapter

CyberScan pH Tutor pH meter w ith single junction pH electrode ECFC7252101B

ECPHTUTOR-S 8034 002 combination electrode,12x90mm,BNC connector, 1 m cable length, 22500.00
indigenous electrode holder and pow er adapter. ATC probe to be ordered separately

CyberScan pH Tutor meter w ith indigeneous refillable glass pH electrode AN-786-1,

ECPHTUTOR-I 8034 010 BNC connector, 1m cable length,indigenous electrode stand and pow er adapter. 18900.00
ATC probe to be ordered separately

General purpose plastic-body single junction gel-Filled pH combination electrode,

ECFC7252101B 8034 004 5580.00
12x90mm, BNC connector, 1m cable length

General purpose glass-body single junction refillable pH combination electrode,

ECFG7350401B 8034 006 annular ceramic reference junction w ith protective sensor guard, 12x110mm, 9000.00
BNC connector, 1m cable length & 10ml refilling electrolyte

General purpose plastic-body “ 3-in-1” pH/Temp. combination electrode, 12x90mm,

ECFC7352901B 8034 005 9900.00
BNC connector, 1m cable length (for pH Tutor)
General purpose glass-body refillable indigenous pH combination electrode,
AN-786-1 8034 009 2250.00
BNC connector, 1m cable length, Make ANTECH.
ECPH5TEMB01P 8034 003 ATC Probe, 1m cable length (for pH Tutor) 7200.00
ECELSTDCNEW 8034 007 Electrode stand w ith sw ivel arm (for pH Tutor) 7650.00
60X030130 8050 007 100 /240VAC SMPS Pow er Adapter w ith US/UK/EUR/Japan plug, 9V,6W, CENTRE + ve (for Tutor) 3960.00

137
 Electrodes | Electrode Selection Guide

Electrode Selection Guide

ELECTRODES
Product Code Cat Description Application pH Range Temp. Length Dia. Internal Price Rs./ Pc.
No. Code Range ºC (mm) (mm) Reference

ECFC7352901B 8034 005 Plastic body L 1 – 13 0 to 80 110 12 Ag/AgCl (S) 9900.00

ECFG7350401B 8034 006 Glass body A,F 0 – 13 0 to 100 110 12 Ag/AgCl (R) 9000.00

ECFG6351101B 8034 013 Glass body J 0 – 13 0 to 100 55 8 Ag/AgCl (S) 24300.00

ECFC7252101B 8034 004 Plastic body A, L 1 – 13 0 to 80 110 12 Ag/AgCl (S) 5580.00

Ec620131 8034 015 Glass body A,B,C,D,L,O,Q 0 – 14 0 to 80 120 12 Ag/AgCl (S) 19800.00

EC620130 8034 016 Glass body A,B,C,G,L,O,Q 0 – 14 0 to 80 160 12 Ag/AgCl (R) 28800.00

EC620132 8034 017 Plastic body A,B,G,L,O,Q 0 – 14 0 to 60 105 12 Ag/AgCl (S) 17100.00

EC620133 8034 018 Glass body A,B,I,O,Q 2 – 11 0 to 50 80 6 Ag/AgCl (S) 31500.00

ECFG7252001B 8034 020 Glass body I 0 – 12 0 to 100 110 12 Ag/AgCl (R) 29700.00

ECFG7370101B 8034 021 Glass body B, O 0 – 13 0 to 100 110 12 Ag/AgCl (R) 24300.00

ECFG4390401B 8034 022 Glass body B, C, M 0 – 13 -5 to 80 55 4 Calomel (R) 29700.00

A General purpose, aqueous pH measurements. Quality control, J Solid or semi-solid samples such as cheese, meats, fruits,

general laboratory and aquarium w ater bread, or other similar samples.

B Tris buffers, clinical, and biological media containing L Portable pH meters; field and school use.

proteins, creams, fats, and cosmetics. M Micro sample, such as semi micro curettes and NMR tube.

C Research measurements, fruit juices, beer, milk and yogurt. N Test tube measurements.

D High viscosity solutions such as emulsions, suspensions, O Reference contamination problems that require a double

paints and varnishes w here frequent cleaning of the junction reference, such as media containing sulfides,

reference is necessary. bromides, iodides, and cyanides.

F Low temperature measurements. P Measurements in long, narrow vessels.

G Low ionic strength solutions, such as high purity w ater. Q Soil pH measurements.

I Surface Measurement such as paper, skin, textile, leather

& agar plates

138
 Conductivity TDS | Pocket Testers

EC Waterproof Large EC Waterproof TDS Waterproof Large TDS Waterproof

Dual-Display Pocket Tester Single-Display Pocket Tester Dual-Display Pocket Tester Single-Display Pocket Tester
Conductivity/ ECTestr 11+ ECTestr 11 ECOECTESTHIGH ECOECTESTLOW TDSTestr 11+ TDSTestr 11 ECOTDSTESTHIGH ECOTDSTESTLOW

TDS
Pocket Testers
Specifications

Measuring Parameter Conductivity/ ºC/ ºF Conductivity TDS/ ºC/ ºF TDS

Highlights Multi-range Dual-range Single-range Multi-range Dual-range Single-range
.. to 200.0µS/cm .. to 100.0 ppm
.. to 2000 µS/cm .. to 19.90 .. to 1990 .. to 1000 ppm .. to 10.00 .. to 1990
Range .. to 2000µS/cm .. to 1000 ppm
.. to 20.00 mS/cm mS/cm# µS/cm .. to 10.00 ppt* ppt* ppm
.. to 20.00 mS/cm .. to 10.00 ppt*
Conductivity 0.1 µS/ cm 0.1 ppm
10 µS/ cm 10 ppm
Resolution 1 µS/ cm 0.10 mS/ cm 10 µS/ cm 1 ppm 0.10 ppt 10 ppm
0.10 mS/ cm 0.10 ppt
0.01 mS/ cm 0.01 ppt

Accuracy +1%full scale + 1% full scale ± 1 % full scale +1% full scale + 1% full scale
± 1% full scale
(+2% above 10mS) (+ 2% above 5 ppt)

TDS Factor – – 0.40 to 1.00 (Selectable) 0.50 to 1.00 0.40 to 1.0

Calibration Points 3 Auto, 3 Manual 2 Auto, 2 Manual 1 Point 3 Manual 2 Manual 1 Point
Range 0 to 50.0 ºC or 32.0 to 122.0 ºF – 0 to 50.0 ºC or 32.0 to 122.0 ºF –
Resolution 0.1 ºC/ ºF – 0.1 ºC/ ºF –
Temperature Accuracy ± 0.5 ºC/ 0.9 ºF – ± 0.5 ºC/ 0.9 ºF –
Calibration – –
± 5.0 ºC/ 9.0 ºF ± 5.0 ºC/ 9.0 ºF
Window
ATC Yes(0 to 50 ºCor 32.0 to 122.0 ºF) Yes Yes(0.0 to 50.0 ºCor 32.0 to 122.0 ºF) Yes
Sensor Type Cup Dip 2 Pin Cup Dip 2 Pin
Temperature – –
2 % per ºC 2 % per ºC
Coefficient
Normalization
25.0 ºC – 25.0 ºC –
Temperature
Meter Non-Volatile
Yes
Features Memory
Auto-Off 8.5 Mins after last key pressed
Operating
0.0 to 50.0 ºC
Temperature
LCD Display Custom dual-display 2.7 cm (H) x 2.1 cm (W) Single-display Custom dual-display 2.7 cm (H) x 2.1 cm (W) Single-display
Power 4x 1.5 V ‘A76’ Micro alkaline batteries
Battery Life > 150 Hours

Dimensions Tester 16.5 x 3.8 cm ; 90 g Unit Only 16.3x4.5x3 cm/ 90g 16.5 x 3.8 cm ; 90 g Unit Only 16.3x4.5x3 cm/ 90g
(LxWxH);
Weight Boxed 22 x 6 x 5 cm ; 170 g 24.5x13.5x4.5 cm / 137g 22 x 6 x 5 cm ; 170 g 24.5x13.5x4.5 cm / 137g

# 1 mS/cm = 1000 µS/cm (µS: microSiemens / mS: miliSiemens) * 1 ppt = 1000 ppm (ppm: parts per million / ppt: parts per thousand)

Product Code Cat No. Description Price Rs./ Pc.

ECTEST11PLS 8036 009 Waterproof ECTestr11+ multi range tester w ith ATC & temperature display 14400.00
(0 - 200.0 µS/cm; 0 - 2000 µS/cm; 0 - 20.00 mS/cm)
ECTEST11 8036 008 Waterproof ECTestr11 dual range tester w ith ATC & temperature display 9900.00
(0 - 2000 µS/cm; 0 -20.00 mS/cm)
ECOECTESTLOW 8036 010 Waterproof EcoTestr EC Low tester w ith ATC, 1 point calibration 6480.00
ECOECTESTHIGH 8036 011 Waterproof EcoTestr EC High tester w ith ATC; 1 point calibration 6480.00
TDSTEST11PLS 8037 009 Waterproof TDSTestr11+ multi range tester w ith ATC & temperature display 14400.00
(0 - 100.0 ppm; 0 - 1000 ppm; 0 - 10.00 ppt)
TDSTEST11 8037 008 Waterproof TDSTestr11 dual range tester w ith ATC & temperature display 9900.00
(0 - 1000 ppm; 0 -10.00 ppt)
ECOTDSTESTLOW 8037 010 Waterproof TDS Testr TDS Low tester w ith ATC, 1 point Calibration 6480.00
ECOTDSTESTHIGH 8037 011 Waterproof TDS Testr TDS High tester w ith ATC; 1 point Calibration 6480.00

Large custom User-replaceable Ribbed body for Cup type sensor

dual-display LCD sensor better grip
139
 pH/ ORP | Pocket Testers

ECOPHTEST ECOPHTEST pHTestr pHTestr pHTestr pHTestr ORPTestr

pHSpear
1 2 30 20 10 10BNC 10
pH/ ORP
Pocket Testers
Specifications

Measuring Parameter pH pH pH/ ºC/ ºF pH ORP (mV)

± 0.1 pH ± 0.1 pH 0.01, Temp. 0.01 0.1 BNC Open pore, Platinum
Highlights
Accuracy Accuracy display Resolution Resolution connection spear tip band sensor
Range 0.0 to 14.0 pH -1.00 to 15.00 pH -1.0 to 15.0 pH -1.00 to 15.00 pH -999 to + 1000 mV
Resolution 0.1 pH 0.01 pH 0.1 pH 0.01 pH 1 mV
Accuracy ± 0.1 pH ± 0.01 pH ± 0.1 pH ± 0.01 pH ± 2 mV
pH/ mV
Calibration
1 Points 3 Point 3 Auto 1 Manual
Points
Buffer Sets USA USA: 4.01/ 7.00/ 10.01 ; NIST: 4.01/ 6.86/ 9.18
– 0 to 50.0 ºC – 0 to 50.0 ºC –
Range (MTC)
32.0 to 122.0 ºF 32.0 to 122.0 ºF
Resolution – 0.1 ºC/ ºF – 0.1 ºC/ ºF –
Temperature
Accuracy – ± 0.5 ºC/ 0.9ºF –
Calibration – ± 5 ºC/ 9 ºF from –
Points default value
ATC No Yes Yes No (MTC) No
Sensor Type Single-junction Double-junction BNC Double-junction
Auto-Off 8.5 Mins after last key pressed
Meter Operating
0 to 50 ºC
Functions Temp.
LCD Display Single display Custom dual-display 2.7 cm (H) x 2.1 cm (W)
Power 4 x 1.5 V “A76” alkaline batteries
Dimensions Tester 16.3x4.5x3 cm/ 90g 16.5 x 3.8 cm ; 90 g 24 x 3.8 cm ;103 g 16.5 x 3.8 cm ; 90 g
(LxWxH) ; 25.5 x 13.5 x 7.5 cm;
Boxed 24.5x13.5x4.5 cm / 137g 22 x 6 x 5 cm ; 170 g 22 x 6 x 5 cm ; 170 g
Weight 240 g

Product Code Cat No. Description Price Rs./ Pc.

PHTEST10 8020 001 Waterproof pHTestr 10 Tester w ith ATC; ± 0.1 pH accuracy 9000.00

PHTEST20 8020 002 Waterproof pHTestr 20 Tester w ith ATC; ± 0.01 pH accuracy 11700.00

PHTEST30 8020 003 Waterproof pHTestr 30 Tester w ith ATC and Temperature Readout; ± 0.01 pH resolution 14400.00

PHTEST10BNC 8020 004 Waterproof pHTestr 10 BNC Tester w ith MTC; BNC connector sensor; ± 0.01 pH resolution 12600.00

(meter only – electrode to be ordered separately)

PHSPEAR 8020 005 Waterproof pHSpear Tester w ith MTC; double-junction spear-tip electrode; ± 0.01 pH accuracy 32400.00

ORPTEST10 8016 003 Waterproof ORPTestr 10 Large Dual Display Tester (-999 to + 1000 mV) 19800.00
ECOPHTEST1 8020 008 Waterproof EcoTestr pH 1 Tester w ithout ATC, 1 point Calibration 6480.00
ECOPHTEST2 8020 009 Waterproof pHTestr 2 Tester w ith ATC; 3 point Calibration 7380.00
PHSENSOR03DJ 8022 001 Replacement Double Junction Sensor for pHTest10, 20, 30 5400.00
PHSENSOR04 8021 006 Replacement Double Junction Spear-tip Electrode for pHSpear 19800.00

140
S C I EN T I F I C
EUTECH™

Thermo Scientific Eutech Expert pH Testers

pH / Temperature
Simultaneously measure pH and temperature w ith the Thermo Scientific™ Eutech™ Expert pH
testers, a pocket sized tester designed to provide accurate measurements on the go for a variety of
applications
— Auto-buffer recognition and auto-calibration make on-site calibration quick and easy
— 3-point calibration allow s the tester to accurately measure pH across the acid and alkali ranges
— ± 0.1 % accuracy

Thermo Scientific Eutech Expert CTS Testers

Conductivity / TDS / Salinity / Temperature
The Thermo Scientific™ Eutech™ Expert CTS tester accurately measures conductivity, TDS, and
salinity in one single instrument, making it an ideal solution for many applications.
† Large 4 digit double line display and w ide view ing
angle make it easy to read and record measurements
Specifications :
† Battery life, ready, and calibration indicators simplify
M odels EXPERTPH EXPERTCTS measurement and pocket tester maintenance
0 0 0 0
M easuring Parameter pH / C / F Conductivity / TDS /Salinity / C / F
Range 0.0 to 14.0 pH - — Hydroponics — Agriculture

pH 0.1 pH - — Aquaculture & Aquariums

Resolution
— Pools & Spas — Education
Relative Accuracy ± 0.1 pH -
Applications — Cooling Tow ers — Water Treatment
Range - 0.00 to 20.00 mS/cm
— Environmental Monitoring
- 10 µ S/cm below 2.00 mS/cm, 0.10 mS/cm — Food & Beverage — Manufacturing
Resolution
above 2.00 mS/cm
Conductivity — Printing and more!
Relative Accuracy - ± 2 % full scale ± 1 LSD
Automatic - 84 µ S/cm, 1413 µ S/cm,
Calibration Values 12.88 mS/cm
Range - 0.00 to 20.00 ppt

- 10 ppm below 2.00 ppt, 0.10 ppt

Resolution
above 2.00 ppt
TDS
Relative Accuracy - ± 2 % full scale ± 1 LSD

TDS Factor - 0.40 to 1.00 (selectable)

Range - 0.0 to 10.0 ppt

Salinity Resolution - 0.10 ppt

Relative Accuracy - ± 2 % of full scale ± 1 LSD

No. of Cal Points 1 to 3 points One calibration point per parameter

0 0
Range 0 to 50.0 C 0 to 50.0 C;
0 0
32.0 to 122.0 F 32.0 to 122.0 F

0 0 0 0
Resolution 0.1 C / 0.1 F 0.1 C / 0.1 F Product Code Description Price Rs./ Pc.
Temperature
0
± 0.5 C / ± 0.9 F
0 0
± 0.5 C / ± 0.9 F
0 Waterproof Expert
Relative Accuracy pH pocket
+ 1 LSD + 1 LSD
Automatic tester w ith ATC and
Yes Yes
EXPERTPH 8020 010 8280.00
Temp. Compensation temp display, 3 point
Calibration,
Includes (4) batteries Includes (4) batteries ± 0.1 pH accuracy
Pow er
(A76 or LR44 equivalent) (A76 or LR44 equivalent)
Waterproof Expert
Auto Off 8.5 mins after last key press 8.5 mins after last key press CTS Conductivity/
TDS/salinity pocket
General Operating Temp. 5 to 45 C
0
5 to 45 C
0
tester w ith ATC and
EXPERTCTS 8020 012 temperature display 9000.00
Ingress Protection IP67 rating; w aterproof IP67 rating; w aterproof (0.00-20.00mS/cm;
0.00 -20.00 ppt;
Dimensions(LxWxH) 17 x 4.5 x 3 cm 17 x 4.5 x 3 cm 0.0 -10.0 ppt)

141
Multi-Parameter Pocket Testers Specifications

PCSTestr 35 PCTestr 35 PTTestr 35

Multi-Parameter
Pocket Testers
Specifications

Measuring Parameter pH / Conductivity / TDS / Salinity / ºC / ºF pH / Conductivity / ºC / ºF pH / TDS / ºC / ºF

Waterproof, temp. display, 0.01 resolution,
Highlights Waterproof, temp. display, 0.1 pH resolution, replaceable sensor
replaceable sensor
Range 0.00 to 14.00 pH 0.0 to 14.0 pH
Resolution 0.01 pH 0.1 pH
Accuracy ± 0.01 pH ± 0.1 pH
pH
Cal. Points Up to 5 (auto)
Auto-Buff er Yes
Recognition
0.0 to 199.9 µS/ cm / 200 to 1999 µS/ cm / -
Range 0 to 1999 µS/ cm / 2.00 to 20.00 mS/ cm
2.00 to 20.00 mS/ cm
Resolution 0.1 µS/ cm / 1 µS/ cm / 0.01 mS/ cm 1 µS/ cm / 0.01 mS/ cm -
Accuracy ± 1 % full scale -
Cal. Points 3 auto, 3 manual 2 auto, 2 manual -
Conductivity
Temperature
0.0 to 10.0 % / ºC
Coeffi cient
Normalisation
25.0 ºC
Temperature
Auto-Ranging Yes
Range 0.0 to 99.9 ppm / 100 to 999 ppm /1.00 to 10.00 ppt - 0 to 999 ppm / 1.00 to 10.00 ppt
Resolution 0.1 ppm / 1 ppm / 0.01 ppt - 1 ppm / 0.01 ppt
TDS Accuracy ± 1 % full scale - ± 1 % full scale
Cal. Points Up to 3 (manual) - Up to 2 (manual)
TDS Factor 0.40 to 1.00 - 0.40 to 1.00

Range 0.0 to 99.9 ppm / 100 to 999 ppm / -

1.00 to 10.00 ppt / 0.0 to 1.00 %
Salinity Resolution 0.1 ppm / 1 ppm / 0.01 ppt / 0.01 % -
Accuracy ± 1 % full scale -
Cal. Points 1 (manual above1.00 ppt)
Range 0 to 50.0 ºC / 32 to 122.0 ºF
Temperature Resolution 0.1 ºC / 0.1 ºF
Accuracy 0.5 ºC / 0.9 ºF
Temperature ATC / MTC
Compensation
Sensor Type pH / Conductivity / TDS / Salinity / Temperature
Non-Volatile Yes
Meter Memory
Features Auto-Off 8.5 mins after last key pressed (can be disabled)
LCD Display Dual-display LCD (2.1 x 2.7 cm)
Power 4 x 1.5 V ‘A76’ micro alkaline batteries
Battery Life > 150 hrs
Dimensions Tester 16.5 x 3.8 cm ; 90 g
(LxWxH); Weight Boxed 18.5 x 6.5 x 5 cm ; 200 g

Product Code Cat No. Description Price Rs./Pc.

PCTEST35 8049 001 Waterproof PCTestr 35 pH/Conductivity/Temp Tester w ith ATC; (± 0.1 pH resolution; 0 - 2000 µS/cm; 0 - 20.00 mS/cm) 16200.00

PTTEST35 8049 002 Waterproof PTTestr 35 pH/TDS/Temp Tester w ith ATC; (± 0.1 pH resolution; 0 - 1000 ppm; 0 - 10.00 ppt) 16200.00

PCSTEST35 8049 003 Waterproof PCSTestr 35 pH/Conductivity/TDS/Salinity/Temp Tester w ith ATC; (± 0.01 pH resolution; 0 - 200.0 µS/cm; 0 - 2000 µS/cm; 20700.00
0 - 20.00 mS/cm; 0 - 100.0 ppm; 0 - 1000 ppm; 0 - 10.00 ppt; 0 - 100.0 ppm; 0 - 1000 ppm; 0 - 10.00 ppt; 0 - 1.00%)
PCSENSOR 8049 004 Replacement pH/Conductivity/Temp Sensor for PCTestr 35, PTTestr 35, PCSTestr 35 7200.00

142

 




 


 


 


 This is to certify that

Eutech Instruments Pte Ltd

(Part of Thermo Fisher Scientific, Inc.)
7 Gul Circle, #2M-01 Keppel Logistics Building Singapore , Singapore 629563 Singapore

Refer to Attachment to Certificate of Registration dated August 8, 2018 for additional certified sites

operates a

Quality Management System

which complies with the requirements of

ISO 9001:2015
for the following scope of certification
The design and manufacture of water quality measuring instruments

Certificate No.: CERT-0121988 Original Certification Date: March 24, 2011

File No.: 1608689 Certification Effective Date: August 7, 2018
Issue Date: August 8, 2018 Certification Expiry Date: August 6, 2021

Kevin Goodwin
General Manager Technical Services
SAI Global Assurance
________________________________________________________________________________

ISO 9001

Registered by:
QMI-SAI Canada Limited (SAI Global), 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada. This registration is subject to the SAI Global
Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for
proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request.
To verify that this certificate is current, please refer to the SAI Global On-Line Certification Register: www.qmi-saiglobal.com/qmi_companies/

.>>>>>>>>>>>
 R iera
ra
ie
iv
iv
R
Calibration Solutions *
Wide range of calibration solutions for pH, ORP, Conductivity, TDS and Salinity. Calibration solutions come in a convenient ready to use 480 ml leak-
proof bottles. Calibration must be done on regular basis for maintaining accuracy of the instrument. It also helps negate the effect of electrode
ageing and contamination. Actual shelf life of the solutions will be lesser on account of shipment transit time and Inventory time lag.

pH Buffer Solutions ( 480 ml)

Cat. Product Description Shelf Life from Maximum

Code No. Date of
No. Packing Price Rs.
8005 001 ECBU4BT pH 4.01 buffer 36 months 1980.00
8005 061 ECBU4BTC pH 4.01 buffer (colored) 36 months 1980.00
8005 002 ECBU7BT pH 7.00 buffer 36 months 1980.00
8005 062 ECBU7BTC pH 7.00 buffer (colored) 36 months 1980.00
8005 003 ECBU9BT pH 9.00 buffer 36 months 1980.00
8005 004 ECBU10BT pH 10.01 buffer 36 months 1980.00
8005 064 ECBU10BTC pH 10.01 buffer (colored) 36 months 1980.00
8005 005 ECBU12BT pH 12.45 buffer 36 months 1980.00
8005 006 ECBU1BT pH 1.68 buffer 36 months 1980.00
8005 007 ECBU686BT pH 6.86 buffer 36 months 1980.00
8005 008 ECBU918BT pH 9.18 buffer 36 months 1980.00
8005 009 ECRE005 pH Electrode Storage Solution 36 months 6930.00
Conductivity Solutions (480 ml)
Cat. Product Description Shelf Life from Maximum
Code No. Date of
No. Packing Price Rs.
8006 008 ECCON84BT 84 µS KCL 12 months 2250.00
8006 001 ECCON100BT 100 µS KCL 12 months 2250.00
8006 002 ECCON500BT 500 µS KCL 36 months 2250.00
8006 003 ECCON1413BT 1413µS KCL 36 months 2250.00
8006 004 ECCON2764BT 2764 µS KCL 36 months 2250.00
8006 005 ECCON1288BT 12.88 mS KCL 36 months 2250.00
8006 006 ECCON1118BT 111.8 mS KCL 36 months 2250.00
8006 007 ECCON5000BT 5.0 mS KCL 36 months 2250.00
TDS Solutions (480 ml)
Cat. Product Description Shelf Life from Maximum
Code No. Date of
No. Packing Price Rs.
8007 004 EC44250BT 50 ppm 12 months 2250.00
8007 001 EC442300BT 300 ppm 36 months 2250.00
8007 002 EC4421000BT 1000 ppm 36 months 2250.00
8007 003 EC4423000BT 3000 ppm 36 months 2250.00
ORP Calibration Standards (480 ml)

Cat. Product Description Shelf Life from Maximum

Code No. Date of
No. Packing Price Rs.
8047 001 ECORPPRE Pretreatment (475 mV) 36 months 3960.00
8047 002 ECORPQUIN Quinhydrone 263 (263 mV, ±30 mV, 25 °C) 36 months 3960.00
8047 003 ECORPQUIN086 Quinhydrone 86 (86 mV) 36 months 3960.00
Salinity Calibration Standards (480 ml)
Cat. Product Description Shelf Life from Maximum
Code No. Date of
No. Packing Price Rs.
8048 001 ECNACL5PPT 5 ppt NaCl 36 months 2520.00
8048 002 ECNACL25PPT 25 ppt NaCl 36 months 2520.00
8048 003 ECNACL45PPT 45 ppt NaCl 36 months 2520.00

145
 Pictograms
Internal adjusting (CAL): quick setting
of the balance’s accuracy with internal
adjusting weight (Motor-driven).
Kern Electronic Balances
Adjusting program (CAL): for quick
setting of the balance’s accuracy.
External adjusting weight required. Kern is w orld renow ned Germ an m anufacturer of
balances and scales with 160 years of manufacturing
Piece counting: reference quantities
selectable. Display can be switched from experience and is specialized in accurate weighing,
piece to weight.
accredited to the latest standard DIN ISO 9001:2000. The
KERN brand stands for precision and reliability.
Data interface: RS 232 C, bidirectional,
for connection of printer or PC.

The product range is very wide and competitive and

GLP/ISO record keeping of weighing includes balances from the small pocket balance to the
data with date, time and ident.- No. Only
with printers from KERN. heavy load industrial balance. There is a large selection of
analytical, laboratory, pocket, industrial, hanging and
Net-total weighing: weight of tare-cup
and weight of components count ing balances as well as m oist ure analyzers.
memorized in two separate stores.
Availability of entry level balances of world standard &
Percentage determination: Displays the
quality for school & colleges at affordable price is an
deviation from the reference weight
(100%) in % instead of grammes. important factor to note.

Unit: Weighing units can be switched Kern uses appropriate technology for its product range.
to e.g. non-metric units at the touch of a
key. See balance model For example the high end precision analytical and
m oist ure b alances use Mono -Block t echnology /
Weighing with tolerance range: Upper
and lower limiting can be programmed Magnetic force compensation technique, type EW/ EG,
individually, e.g. dosing /sorting.
470/ 474 and EC incorporate tuning force measuring
system known for reliability and stability needed in some
Spray and dust protection: Protection
class is indicated in the symbol. application areas and many other inexpensive but sturdy
models use load cell principle.
Underfloor weighing: Load support
with hook on the underside of the balance.
Another strength of KERN is the production of precision
test weights in all fault tolerance categories (E1, E2, F1, F2,
Accu-supply: Rechargeable set. M1, M2, M3)- important tools for checking of your
measuring instruments within the scope of quality
Mains adapter: 230 V / 50 Hz.
assurance provision in accordance with ISO standards.
Standard type D, if requested also
available in standard GB, AUS or USA. These weights and balances can be supplied with DAkkS
(German) calibration certificate or calibration certificate
Mains Part: Mains part integrated in the
balance. 230 V/50 Hz in Germany. Upon
from Indian accredited laboratory. Details in this regard
request also in standard GB, AUS or USA
will be furnished on request.
Tare: Put back displayed value to “0”
during weighing process, e.g. to add or
remove weighing material from a
The products are brought to you by Riviera Glass Pvt Ltd
container.
as exclusive distributor in India with assured service
Animal weighing programme : support.
Strong vibrations are filtered out.
only
ABJ KERN ABS-N/ABJ-NM
Analytical balance
The bestseller in analytical balances, now with high-quality single-cell weighing
only system and EC type approval [M]
ABS

Technical data Single-cell advanced technology:

• Large LCD display, digit height 14 mm • Fully automatic manufactured
• Dimensions of weighing plate ø 91 mm weighing cell from one piece of
• Overall dimensions WxDxH 210x340x325 mm material
• weighing space WxDxH 174x162x227 mm • Stable temperature behaviour
• Permissible ambient temperature 10°C / 30°C • Short stabilisation time: Steady
• Net weight approx. 6 kg weight values within approx. 3 sec
under laboratory conditions
• Shock proof construction
• High corner load performance

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. (with external ‘d’ range ucibility rity price/Pc.
calibration) mg g mg mg Rs.
10011 1204 ABS 120-4N 0.1 120 0.2 ±0.3 122170.00
10011 2204 ABS 220-4N 0.1 220 0.2 ±0.3 128165.00
(with internal
Calibration)
10261 1204 ABJ 120-4NM 0.1 120 0.2 ±0.3 128165.00
10261 2204 ABJ 220-4NM 0.1 220 0.2 ±0.3 138940.00

KERN ABT
Analytical balance
The premium model with single-cell weighing system
only with
statistics
Technical data Single-cell advanced technology:
printer
• Large LCD display, digit height 14 mm • Fully automatic manufactured
• Dimensions of weighing plate ø 80 mm weighing cell from one piece of
• Overall dimensions WxDxH 217x356x338 mm material
• weighing space WxDxH 168x172x223 mm • Stable temperature behaviour
• Permissible ambient temperature 10°C / 30°C • Short stabilisation time: Steady
• Net weight approx. 7 kg weight values within approx. 3 sec
under laboratory conditions
• Shock proof construction
• High corner load performance

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. (with internal ‘d’ range ucibility rity price/Pc.
calibration) mg g mg mg Rs.
1032 0120 ABT 120-4NM 0.1 120 0.1 ±0.2 176085.00
1032 0220 ABT 220-4NM 0.1 220 0.1 ±0.2 211995.00

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. (with internal ‘d’ range ucibility rity price/Pc.
Calibration, mg gm mg mg Rs.
Dual Range)
1033 0120 ABT 120-5DNM 0.01 / 0.1 42 / 120 0.02 / 0.1 ±0.05 / 0.2 252915.00
1033 0220 ABT 220-5DNM 0.01 / 0.1 82 / 220 0.02 / 0.1 ±0.1 / 0.2 277885.00

148
 KERN EWJ
Precision balance
High-quality precision balance with automatic internal
adjustment and EC type approval [M]

Technical data
• Large LCD display, digit height 16.5 mm
• Dimensions of weighing plate ø 80 mm
• Overall dimensions WxDxH 220x350x90 mm
• Inclusive draft shield 220x315x180 mm
• Permissible ambient temperature 5°C / 40°C
optional • Optional - Rechargeable battery pack internal,
statistics operating time up to 15 h without backlight,
printer charging time approx. 4 h, KERN KFB-A06

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. (with internal ‘d’ range ucibility rity price/Pc.
calibration) g g g g Rs.
1034 0300 EWJ 300-3 0.001 300 0.001 0.005 53920.00
1034 0600 EWJ 600-2M 0.01 600 0.01 0.03 43100.00

optional

Density Determination Set

• Density set for precise and convenient density determination of
liquids and solids ≤/≥1.
• Suitable for all KERN analytical balances.
• Scope of delivery: Beaker, thermometer, sample holder,
adapter, equalizing weights, volume plummet (stainless steel,
20 g), universal submersible basket for solid bodies which float
and sink.
• The wire of the submersible basket has a diameter of 0.5 mm
and therefore complies with the requirements of DIN EN ISO
1183-1 (Test methods for the determination of density of non-
foamed plastics)

Cat Model Description Maximum.

No. price/Pc.
Rs.
1000 0521 YDB-03 Density Determination Set 46725.00
suitable for all KERN Analytical Balances

149
 KERN KB
Precision balance
Optional Extra :
• Statistics printer
• Standard printer
• Rechargeable battery
pack

Ring Shaped draft shield

only with KB 120-3
& KB 200-3

Cat Model KERN Read out Weighing Reprod- Linea- Weigh- Maximum.
No. ‘d’ range ucibility rity ing price/Pc.
g g g g Plate mm Rs.
1022 0120 KB 120-3N 0.001 121 0.001 ± 0.003 Ø 81 34755.00
1022 0240 KB 240-3N 0.001 200 0.001 ± 0.003 Ø 81 35935.00
1022 1200 KB 1200-2N 0.01 1210 0.01 ± 0.03 130 x 130 33550.00
1022 2000 KB 2000-2N 0.01 2010 0.01 ± 0.03 130 x 130 36225.00
1022 0010 KB 10000-1N 0.1 10100 0.1 ± 0.3 150 x 170 32340.00

KERN 572
Precision balance
Optional Extra :
• Statistics printer
• Standard printer
• DAkks certificate
• Rechargeable Battery Pack

572-30,
572-31 & 572-32 Ring Shaped draft shield
with Glass Draft (standard) only with
Shield (optional) 572-30, 572-31 & 572-32

Cat Model KERN Read out Weighing Reprod- Linea- Weigh- Maximum.
No. ‘d’ range ucibility rity ing price/Pc.
g g g g Plate Rs.

1023 0241 572-30 0.001 240 0.001 ± 0.003 Ø 105 62265.00

1023 0301 572-31 0.001 300 0.002 ± 0.003 Ø 105 63475.00
1023 0421 572-32 0.001 420 0.002 ± 0.005 Ø 105 64680.00
1023 1610 572-33 0.01 1600 0.01 ± 0.03 Ø 150 58695.00
1023 2410 572-35 0.01 2400 0.01 ± 0.03 Ø 150 59955.00
1023 3010 572-37 0.01 3000 0.02 ± 0.05 Ø 150 61110.00
1023 1210 572-45 0.10 12000 0.05 ± 0.15 160 x 200 58695.00
1023 0024 572-57 0.10 24000 0.10 ± 0.30 160 x 200 59955.00
1023 0501 572-A05 Glass draft shield for Models 572 with d=0.001 g 27565.00

150
only
EG-N KERN EW • EG • (N)
Precision balance
only
EW-N Optional Extra :
• Statistics printer
• Standard printer
• DAkkS certificate
• Rechargeable battery pack

Weighing plate sizes :

only with Models with d = 0.001 g: Ø 118 mm
statistics Models with d = 0.01 g:
printer 170 x 142 mm (EW 820-2 NM)
180 x 160 mm (EG 2200-2 NM)

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. (with external ‘d’ range ucibility rity price/Pc.
calibration) g g g g Rs.
1003 0220 EW 220-3 NM 0.001 220 0.001 ±0.002 74290.00
(with internal
calibration)
1003 0221 EG 220-3 NM 0.001 220 0.001 ±0.002 91035.00
Note : Draft Shield shown in the picture is provided with opening for using a pipette only with Model EW 220-3 NM & EG 220-3 NM .
INTERNAL ADJUSTMENT CONTROL CAL via rotary control on the side (Model EG-N)
Additional models are available up to max. weighing range 12000g. Offer on request

KERN 440
Economical top loading precision balance

Weighing plate sizes :

Models with d = 0.001 g: Ø 81 mm
Optional Extra : with draft shield Ø 90 mm, Ht. 40 mm
• Statistics printer Models with d = 0.01 g: Ø 105 mm
• Standard printer Models with d= 0.1 g (except 440-49N): 130 x 130 mm
• DAkkS certificate Model 440-49N with d= 0.1 g: 150 x 170 mm
• Rechargeable battery pack Models with d= 0.2 g & 1.0 g: 150 x 170 mm

Cat Model KERN Read out Weighing Linea- Maximum.

No. ‘d’ range rity price/Pc.
g g g Rs.

only with 1005 0060 440-21 A 0.001 60 ±0.003 41920.00

statistics 1005 0200 440-33 N 0.01 200 ±0.02 34735.00
printer 1005 0400 440-35 N 0.01 400 ±0.03 39535.00
1005 0401 440-43 N 0.1 400 ±0.2 22155.00
1005 1000 440-45 N 0.1 1000 ±0.2 29350.00
1005 2000 440-47 N 0.1 2000 ±0.2 32340.00
1005 4001 440-49 N 0.1 4000 ±0.3 39535.00
1005 4000 440-51 N 1.0 4000 ±2 19165.00
1005 6000 440-53 N 1.0 6000 ±2 21550.00
Note : Battery operation possible. Mono-block battery (9 V). Auto -Off function after 3 minutes without change of load to preserve the battery
Balances with internal rechargeable battery pack can be supplied only with specific order.
Incorporation is possible at the time of manufacturing only.

151
 KERN EMB
Entry level balances
for school & colleges

MODEL EMB
• Batteries included
• Mains Adapter optional at extra cost
Option • Weighing plate size Ø 105 mm (EMB 200-2, EMB 600-2)
& Ø 150 mm (other models)
• Auto Off function after 3 minutes without change of load
• Mains Adapter (Optional)

Cat Model KERN Read out Weighing Reprod- Line Maximum.

No. ‘d’ range ucibility rity price/Pc.
g g g g Rs.
1007 0200 EMB 200-2 0.01 200 - - 16225.00
1007 0600 EMB 600-2 0.01 600 - - 21630.00
1007 0500 EMB 500-1 0.1 500 - - 7300.00
1007 1200 EMB 1200-1 0.1 1200 - - 10300.00
1007 2200 EMB 2200-0 1 2200 - - 6705.00
1007 5200 EMB 5.2K1 1 5200 - - 8110.00
1007 5201 EMB 5.2K5 5 5200 - - 6815.00
1000 0531 Mains adapter (YKA-03) 3720.00

KERN TEE KERN CM

Pocket balance Pocket balance
Features : Features :
• Small and handy • Lift up lid as protection against
• Batteries (2 x1.5VAAA) pressure and dust
Auto Off function after 3 minutes • Integrated pocket calculator
without change of load • Batteries (2 x 1.5 V AAA)
Auto Off function after 4 minutes
without change of load

Cat Model KERN Read out Weighing Maximum.

No. ‘d’ range price/Pc.
g g Rs.
1014 0150 TEE 150-1 0.1 150 5735.00
1015 0060 CM 60-2N 0.01 60 9460.00
1015 0150 CM 150-1N 0.1 150 6230.00
1015 0320 CM 320-1N 0.1 320 6590.00
1015 1000 CM 1K1 N 1.0 1000 6230.00

152
 KERN ECB • EOB
Platform scales

Option

Option

MODEL ECB MODEL EOB

• Ideally suited for mobile use • Wall mounting for the display device
• Battery operation (6 x 1.5V AA) • Battery operation (6 x 1.5V AA) possible
• Mains Adapter (Optional) • Further weighing unit : lb
• Rechargeable battery pack optional, at extra cost • Weighing plate size 310 x 300 mm
• Weighing plate size 318 x 258 mm • Ideally suited for dispatch department

Cat Model KERN Read out Weighing Reprod- Linea- Maximum.

No. ‘d’ range ucibility rity price/Pc.
g kg g g Rs.
1008 2011 ECB 20K 2N 10 20 10 ±40 14375.00
1008 5021 ECB 50K 2N 20 50 20 ±80 14375.00
1009 3510 EOB 35K 10 10 35 10 ±20 18210.00
1009 6020 EOB 60K 20 20 60 20 ±40 18210.00

KERN FCB
Bench Scale

Features
• Second display on the rear of the balance
• PRE-TARE function for manual subtraction of a known
container weight, useful for checking fill-levels
• UNITS: Further weighing units see the internet

Technical data
• Backlit LCD display, digit height 25 mm
• Dimensions of weighing plate (stainless steel)
W x D 252 x 228 mm
• Overall dimensions W x D x H — 270 x 345 x 106 mm

Cat Model KERN Read out Weighing Reprod- Linea- Min. Piece Maximum.
No. ‘d’ range ucibility rity count wt. price/Pc.
g kg g g g/pc Rs.
1010 0103 FCB 3 K 0.1 0.1 3 0.1 ±0.3 0.2 26355.00
1010 0106 FCB 6 K 0.5 0.5 6 0.5 ±1.5 1.0 22760.00
1010 0112 FCB 12 K 1 1.0 12 1.0 ±3.0 2.0 22155.00

153
 KERN CH • HCB
Hanging scale

KERN CH KERN HCB

Features : Features :
• Data hold function • Data hold function
• Stainless steel hook • Stainless steel hook
• Tape measure extractable • Stainless steel snap link
(100 cm) • Batteries (3 x 1.5 V AA)
• Block batteries (9 V) Auto off after 3 minutes
Auto off after 3 minutes without change of load
without change of load

Cat Model KERN Read out Weighing Maximum.

No. ‘d’ range price/Pc.
g kg Rs.
1017 0015 CH 15K 20 20 15 8505.00
1017 0050 CH 50K 50 50 50 9105.00
1017 0051 CH 50K 100 100 50 7910.00
1018 0200 HCB 200K 500 500 200 11860.00

KERN PFB
Precision balance
Low-cost model based on a concept of easy use
Features
• Concept of easy use: All primary functions have their own key on the keypad.
• Compact size, practical for small spaces.
• Capacity display: A bar lights up to show how much of the weighing range is
still available.
• Level indicator and foot screws to level the balance precisely, fitted as
standard, to give the most accurate weighing results,
• Draft shield standard (for models with weighing plate sizes A and B ).
Removable metal cover with pipette opening.
Weighing space WxDxH 158x143x64 mm

Technical data
• Backlit LCD display, digit height 15 mm
• Dimensions of weighing plate (stainless steel)
A — Ø 80 mm
B — Ø 120 mm

80 120
A—Ø B—Ø

Cat Model KERN Read out Weighing Reprod- Linea- Weigh- Maximum.
No. ‘d’ range ucibility rity ing price/Pc.
g g g g Plate mm Rs.
1029 0120 PFB 120-3 0.001 120 0.001 ± 0.003 Ø 80 33538.00
1029 0200 PFB 200-3 0.001 200 0.001 ± 0.003 Ø 80 34735.00
1029 0300 PFB 300-3 0.001 300 0.001 ± 0.003 Ø 80 38325.00
1029 1200 PFB 1200-2 0.01 1200 0.01 ± 0.03 Ø 120 29350.00

154
Test weights :
Single as well as set of test weights are available in stainless steel or nickel plated brass. They can be
supplied with German DAkkS certificate or locally with ERTL traceability, at extra cost.

Single weight Stainless Steel Class, E2

Cat. Description Price/Pc

No. Rs.
1000 0535 1 g in box 8125.00
1000 0536 2 g in box 8565.00
1000 0537 5 g in box 9120.00
1000 0538 10 g in box 9400.00
1000 0539 20 g in box 10570.00
1000 0540 50 g in box 11900.00
1000 0541 100 g in box 12705.00
1000 0542 200 g in box 16060.00
1000 0543 500 g in box 26770.00
1000 0544 1 kg in box 38505.00
1000 0545 2 kg in box 61005.00
1000 0546 5 kg in box 87600.00
1000 0547 10 kg in box 136270.00
1000 0548 20 kg in box 237930.00
1000 0549 50 kg in box 530450.00
Single weight Stainless Steel, Class F1

Cat. Description Price/Pc

No. Rs.
1000 0551 1 g in box 3675.00
1000 0552 2 g in box 3900.00
1000 0553 5 g in box 4170.00
1000 0554 10 g in box 4555.00
1000 0555 20 g in box 4870.00
1000 0556 50 g in box 5305.00
1000 0557 100 g in box 5785.00
1000 0558 200 g in box 9135.00
1000 0559 500 g in box 11090.00
1000 0560 1 kg in box 15900.00
1000 0561 2 kg in box 23250.00
1000 0562 5 kg in box 41740.00
1000 0563 10 kg in box 77000.00
1000 0564 20 kg in box 192510.00
1000 0565 50 kg in box 381100.00

Weight Set, Stainless Steel, in plastic carrying case, Class E2

Cat. Description Price/Set

No. Rs.
1000 0571 Range 1 mg - 200 g 163310.00

Weight Set, Stainless Steel, in plastic carrying case, Class F1

Cat. Description Price/Set

No. Rs.
1000 0581 Range 1 mg - 200 g 99500.00

Note : Weight boxes and weights in other ranges and class E1, E2, F1, F2, M1, M2 & M3
are also available. Details / Price on Request

155
Semi Micro Balance
CY-C Series GLP
GLP
PCS
U.S. Pharmacopeia
SM
The Standard of Q uality

Pe rfe c t se lf Auto C a lib ra tio n ANI

W h e n t h e a m b ie n t
Che
te mp e ra ture c ha ng e s b y a
sp e c ific va lue o r o nc e a
Stat
d e fine d tim e inte rva l ha s
e la p se d , it p e rfo rms inte rna l PIPT
c a lib ra tio n.
DEN
Inc o m pa ra b ly fa st
An o utsta nd ing fe a ture is Form
sp e e d a nd sta b le re a d o uts
Brillia nt re a da b ility
with five d e c ima l p la c e s in just AIR
Hig h c o n tra st G ra p h ic a l five se c o nd s.
Disp la y with b a c klit. FIL

Applic a tio n Se p a ra te M e a s u re m e n t
• Fo o d syste m UNIT
• Pha rma c e utic a ls Ba la nc e ha ve p o ssib ility o f PC
• Institute d isc o nne c ting the d isp la y unit RS 232

• La b o ra to ry fro m w e ig hing c ha m b e r, USB

whic h c o nsid e ra b ly re d uc e s
Inc o m pa ra b ly sta b le a c c ura c y v ib ra tio n s tra n sfe rre d to PSAC
Re p e a ta b ility o f the we ig hts me a sure d is a n a d d itio na l stre ng th, Rug g e d a nd hig h we ig hing c ha mb e r a nd in
he ig ht MO NO TEC H se nso r a llo ws b a la nc e to g ive e xc e p tio na lly sta b le re sult. turns yie ld sta b le re sult. INT

Mo de l C Y 205C C Y 265C C Y 165C C Y 85C

C a p a c ity 220 g m 60 / 210 g m 100 / 160 g m 80 g m
Re a d a b ility 0.01 mg 0.01 / 0.1mg 0.01 / 0.1mg 0.01 mg
Re p e a ta b ility (sd ) 0.03 mg 0.02 / 0.1mg 0.02 / 0.1mg 0.02 mg
Line a rity (+/ -) 0.06 mg 0.05 / 0.3mg 0.05 / 0.2mg 0.04 mg
Min. We ig ht a s p e r USP 30 mg 30 mg 30 mg 30 mg
Pa n Size (mm / inc h) 80 Ø / 3.15” Ø
Re sp o nse Time 5 - 8 Se c .
Disp la y Alp ha nume ric LC D Ba c klite Disp a ly with A.E.P.
C a lib ra tio n Pe rfe c t Auto Inte rna l Time & Te mp C o ntro lle d Sma rt C a lib ra tio n
Units o f me a sure g , mg , c t, G N, mo , o z, d wt e tc .
Ta re Ra ng e Full C a p a c ity
O p e ra ting Te mp . 18º to 30ºC
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Inte rfa c e RS 232 o r USB
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing , C he c k We ig hing
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
We ig hing C ha mb e r (mm) 165 x 185 x 220
Ne t Wt. / G ro ss Wt. 10.20kg / 14.70kg
Ho using Dim. (WxDxH) (mm) 212 x 340 x 340
C a t No . 1072 0205 1072 0265 1072 0165 1072 0085
Ma xim um Pric e Rs./ Pc . 284550.00 165900.00 178500.00 160650.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

157 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Analytical Balance
CY-C Series GLP
PRINT FO RMATS Brillia nt re a da b ility GLP
Hig h-c o ntra st, b a c klit d isp la y PCS
22-Mar-17 11:13AM is e xc e p tio na lly e a sy to re a d
Aczet und e r a ny ro o m lig hting %
Model CY 224C
Ser. no. 9021107 c o nd itio ns.
ANI
Ver. no. r0.1.04
ID 1234567 G LP
Che
Built-in c lo c k ma ke a ll yo ur
Calibration: Internal
d o c ume nts ISO / G LP / USP
PIPT
W-ID ............ c o mp lia nc e .
Temperature 29.378’C
Set + 200.0000g DEN
IDNR
Diff. -0.0031g
Fa c ility to inp ut IDNR numb e r Form
fo r ind ivid ua l re a d ing s.
Internal Cal Done
AIR
Diff. 0.0000g
RS 232C / USB
22-Mar-17 11:13AM A b id ire c tio na l RS 232C d a ta FIL
Name : in te rfa c e o r USB m a ke s
............ c o m m unic a tio n w ith PC /
Printe r e a sie r. UNIT
PC
Applic a tio n : S ta tis tic a l C a lc u la tio n RS 232
USB
Func tio n
• We ig hing The b a la nc e d isp la y a nd / o r
U
• Ne t / To ta l o utp ut sta tistic a l c a lc ula tio n
• C he c k We ig hing d a ta a s No . (numb e r o f d a ta ),
• We ig ht a c c umula tio n SUM (to ta l), MAX (ma ximum), INT
• Pie c e c o unting Pe rfe c t Se lf Auto C a lib ra tio n (PSAC ) MIN (m inim um ), R [ra ng e
PSAC
• Anima l We ig hing W h e n th e a m b ie n t te m p e ra tu re (ma ximum - minimum)], AVE
• Dyna mic We ig hing c ha ng e s b y a sp e c ific va lue o r o nc e a ( a v e ra g e ) , SD ( sta n d a rd Statistical

• De nsity d e te rmina tio n d e fine d time inte rva l ha s e la p se d , it d e v ia t io n ) a n d C V

• Be lo w b a la nc e we ig hing p e rfo rms Inte rna l C a lib ra tio n. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 304C C Y 224C C Y 124C C Y 64C

C a p a c ity 300 g m 220 g m 120 g m 60 g m
Re a d a b ility 0.1 mg 0.1 mg 0.1 mg 0.1 mg
Re p e a ta b ility (sd ) 0.2 mg 0.1 mg 0.1 mg 0.1 mg
Line a rity (+/ -) 0.3 mg 0.2 mg 0.2 mg 0.2 mg
Pa n Size (mm / inc h) 90Ø / 3.5” Ø
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric Ba c klite LC D Disp la y
C a lib ra tio n Mo to rise d Inte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15ºC to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 341 x 345
We ig ht Ap p ro x 9.3 kg / 20 lb
C a t No . 1060 0304 1060 0224 1060 0124 1060 0064
Ma xim um Pric e Rs./ Pc . 125000.00 84000.00 83000.00 81000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

158 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Analytical Balance
CY Series
GLP
Brillia nt re a da b ility GLP
PRINT FO RMATS Hig h-c o ntra st, b a c klit d isp la y PCS
is e xc e p tio na lly e a sy to re a d
22-Mar-17 11:13AM
Aczet und e r a ny ro o m lig hting
%
Model CY 224 c o nd itio ns.
Ser. no. 9021151
Ver. no. r0.1.04 ANI
G LP
ID 1234567
Built-in c lo c k ma ke a ll yo ur Che
Calibration: External d o c ume nts ISO / G LP / USP
c o mp lia nc e . PIPT
W-ID ............
Temperature 29.378°C
Set + 200.0000g IDNR
DEN
Diff. -0.0031g Fa c ility to inp ut IDNR numb e r
fo r ind ivid ua l re a d ing s. Form
External Cal Done
Diff. 0.0000g RS 232C / USB
AIR
A b id ire c tio na l RS 232C d a ta
22-Mar-17 11:13AM in te rfa c e o r USB m a ke s
Name : FIL
............ c o m m unic a tio n w ith PC /
Printe r e a sie r.
UNIT
Applic a tio n : S ta tis tic a l C a lc u la tio n
PC
Func tio n RS 232
• We ig hing The b a la nc e d isp la y a nd / o r USB
• Ne t / To ta l o utp ut sta tistic a l c a lc ula tio n
• C he c k We ig hing d a ta a s No . (numb e r o f d a ta ), U
• We ig ht a c c umula tio n SUM (to ta l), MAX (ma ximum),
• Pie c e c o unting MIN (m inim um ), R [ra ng e
• Anima l We ig hing (ma ximum - minimum)], AVE EXT
• Dyna mic We ig hing O ve rlo a d Pro te c tio n
( a v e ra g e ) , SD ( sta n d a rd
• De nsity d e te rmina tio n C a p a c ity tra c ke r b uilt into d isp la y fo r d e v ia t io n ) a n d C V
Statistical

• Be lo w b a la nc e we ig hing e a sily mo nito ring p o ssib le o ve rlo a d s. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 304 C Y 224 C Y 124 C Y 64

C a p a c ity 300 g m 220 g m 120 g m 60 g m
Re a d a b ility 0.1 mg 0.1 mg 0.1 mg 0.1 mg
Re p e a ta b ility (sd ) 0.2 mg 0.1 mg 0.1 mg 0.1 mg
Line a rity (+/ -) 0.3 mg 0.2 mg 0.2 mg 0.2 mg
Pa n Size (mm / inc h) 90Ø / 3.5” Ø
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Disp la y
C a lib ra tio n Auto ma tic Exte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15º to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 341 x 345
We ig ht Ap p ro x 9.3 kg / 20 lb
C a t No . 1061 0304 1061 0224 1061 0124 1061 0064
Ma xim um Pric e Rs./ Pc . 113000.00 73000.00 72000.00 68000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

159 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Precision Balance
CY Series
PRINT FO RMATS GLP
22-Mar-2017
G LP GLP
Aczet Built-in c lo c k ma ke a ll yo ur PCS
d o c ume nts ISO / G LP / USP
CY 324
c o mp lia nc e . %

RS 232C / USB
ANI
A b id ire c tio na l RS 232C d a ta
in te rfa c e o r USB m a ke s
Che
c o m m unic a tio n w ith PC /
Printe r e a sie r.
PIPT

DEN
22-Mar-2017

Form
Pa n Size
Dia . 110 mm
AIR
O ve rlo a d Pro te c tio n
22-Mar-2017 11:13AM Pa n Size
C a p a c ity tra c ke r b uilt into
Aczet 128 x 128 mm FIL
Model CY 324 d isp la y fo r e a sily mo nito ring
Ser. no. 9021124
Applic a tio n : Ana lytic a l Wind Shie ld p o ssib le o ve rlo a d s.
Ver. no. r0.1.04
ID 1234567 Pre c isio n b a la n c e w ith
UNIT
• We ig hing a na lytic a l wind shie ld is a n S ta tis tic a l C a lc u la tio n
Calibration: External PC
• Ne t / To ta l a d d itio n f o r a c c u ra te , Func tio n
re lia b le a nd The b a la nc e d isp la y a nd / o r RS 232
W-ID ............ • C he c k We ig hing
Temperature 29.378°C
• Pe rc e nta g e We ig hing o utp ut sta tistic a l c a lc ula tio n USB
Set + 200.000g
Diff. -0.031g • We ig ht a c c umula tio n IDNR d a ta a s No . (numb e r o f d a ta ),
• Pie c e c o unting Fa c ility to inp ut IDNR numb e r SUM (to ta l), MAX (ma ximum), U

• Anima l We ig hing fo r ind ivid ua l re a d ing s. MIN (m inim um ), R [ra ng e

External Cal Done
Diff. 0.000g • Dyna mic We ig hing (ma ximum - minimum)], AVE
• De nsity d e te rmina tio n Brillia nt re a da b ility ( a v e ra g e ) , SD ( sta n d a rd EXT
22-Mar-2017 11:13AM
Name : • Be lo w b a la nc e Brig ht b a c klit d isp la y w ith d e v ia t io n ) a n d C V Statistical

............ we ig hing 15mm d ig its. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 123 C Y 223 C Y 323 C Y 423 C Y 513 C Y 723 C Y 1003 C Y 2003

C a p a c ity 120 g m 220 g m 320 g m 420 g m 510 g m 720 g m 1000 g m 2000 g m
Re a d a b ility 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m
Re p e a ta b ility (sd ) 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.002 g m 0.003 g m
Line a rity (+/ -) 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.005 g m 0.005 g m
Pa n Size (mm / inc h) Dia . 110 mm 128 x 128 / 5” x 5”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Ba c klite Disp la y with A.E.P.
C a lib ra tio n Auto ma tic Exte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 10º to 40ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 341 212 x 342.5 x 271
We ig ht Ap p ro x. 7.5 kg
C a t No . 1062 0123 1062 0223 1062 0323 1062 0423 1062 0513 1062 0723 1062 1003 1062 2003
Ma xim um Pric e Rs./ Pc . 34000.00 37000.00 40000.00 48000.00 50000.00 75000.00 98000.00 187000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

160 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Precision Balance
CY-C Series
PRINT FO RMATS GLP
22-Mar-2017 GLP
Aczet Brillia nt re a da b ility PCS

CY 324C
Brig ht b a c klit d isp la y w ith
15mm d ig its. %

G LP ANI
Built-in c lo c k ma ke a ll yo ur
d o c ume nts ISO / G LP / USP Che
c o mp lia nc e .
PIPT

RS 232C / USB
DEN
Pa n Size A b id ire c tio na l RS 232C d a ta
22-Mar-2017
Dia . 110 mm in te rfa c e o r USB m a ke s
Form
c o m m unic a tio n w ith PC /
Ana lytic a l Dra ft Shie ld Printe r e a sie r.
Pa n Size AIR
128 x 128 mm Pre c isio n b a la n c e w it h
a na lytic a l d ra ft shie ld is a n O ve rlo a d Pro te c tio n
22-Mar-2017 11:13AM FIL
Aczet a d d itio n fo r a c c ura te , re lia b le C a p a c ity tra c ke r b uilt into
Model CY 324C
a nd sta b le . d isp la y fo r e a sily mo nito ring
Ser. no. 9021124
Ver. no. r0.1.04 Applic a tio n : p o ssib le o ve rlo a d s. UNIT
ID 1234567 Pe rfe c t Se lf Auto C a lib ra tio n PC
• We ig hing (In b a la nc e with suffix “C ”) S ta tis tic a l C a lc u la tio n RS 232
Calibration: Internal
• Ne t / To ta l W h e n th e a m b ie n t Func tio n USB
W-ID ............ • C he c k We ig hing te mp e ra ture c ha ng e s b y a The b a la nc e d isp la y a nd / o r
Temperature 29.378°C
Set + 200.000g
• Pe rc e nta g e We ig hing sp e c ific va lue o r o nc e a o utp ut sta tistic a l c a lc ula tio n U
Diff. -0.031g • We ig ht a c c umula tio n d e fine d tim e inte rva l ha s d a ta a s No . (numb e r o f d a ta ),
• Pie c e c o unting e la p se d , it p e rfo rms Exte rna l SUM (to ta l), MAX (ma ximum),
Internal Cal Done • Anima l We ig hing C a lib ra tio n. MIN (m inim um ), R [ra ng e INT
Diff. 0.000g • Dyna mic We ig hing (ma ximum - minimum)], AVE PSAC
22-Mar-2017 11:13AM
• De nsity d e te rmina tio n IDNR ( a v e ra g e ) , SD ( sta n d a rd
Name : • Be lo w b a la nc e Fa c ility to inp ut IDNR numb e r d e v ia t io n ) a n d C V Statistical

............ we ig hing fo r ind ivid ua l re a d ing s. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 123C C Y 223C C Y 323C C Y 423C C Y 513C C Y 723C C Y 1003C C Y 2003C

C a p a c ity 120 g m 220 g m 320 g m 420 g m 510 g m 720 g m 1000 g m 2000 g m
Re a d a b ility 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m
Re p e a ta b ility (sd ) 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.001 g m 0.002 g m 0.003 g m
Line a rity (+/ -) 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.002 g m 0.005 g m 0.005 g m
Pa n Size (mm / inc h) Dia . 110 mm 128 x 128 / 5” x 5”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Ba c klite Disp la y with A.E.P.
C a lib ra tio n Mo to rise d Inte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 10º to 40ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 341 212 x 342.5 x 271
We ig ht Ap p ro x 7.5 kg
C a t No . 1065 0123 1065 0223 1065 0323 1065 0423 1065 0513 1065 0723 1065 1003 1065 2003
Ma xim um Pric e Rs./ Pc . 46000.00 48000.00 51000.00 59000.00 61000.00 86000.00 109000.00 210000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

161 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Top Loading Precision Balance
24-Mar-2017 CY Series
PRINT FO RMATS
11:22AM
Aczet GLP
GLP
Model CY 3102
Ser. no. 9021161 PCS
Ver. no. r0.0.04
ID 1234567
%
LID 7654321
nRef 50pcs
ANI
Nref 40.00 g
+ 50 pcs
+ 1999.97 g Che
+ 9999.85 ct
+ 50 pcs
PIPT
24-Mar-17 11:23AM
Name:
DEN
............
Form

AIR
22-Mar-17 11:13AM Displa y
Aczet Brig ht Ba c klit LC D d isp la y with Winning te c hno lo g y
Model CY 3102
Ser. no. 9021161
C Y 612 o nly 15mm he ig ht. m o n o t e c h t e c h n o lo g y , FIL

Ver. no. r0.1.04 whic h e nsure s lo ng -te rm hig h

ID 1234567 Applic a tio n : Fa st re sults a c c ura c y.
La t e s t p o w e rf u l UNIT
Calibration: External
• We ig hing m ic ro p ro c e sso r, sh o rte n s S ta tis tic a l C a lc u la tio n PC
W-ID ............ • Ne t / To ta l re sp o nse time just 3se c . Func tio n RS 232
Temperature 29.378°C • C he c k We ig hing The b a la nc e d isp la y a nd / o r USB
Set + 2000.00g • Pe rc e nta g e We ig hing G LP o utp ut sta tistic a l c a lc ula tio n
Diff. -0.31g
• We ig ht a c c umula tio n Built-in c lo c k ma ke a ll yo ur d a ta a s No . (numb e r o f d a ta ),
U
• Pie c e c o unting d o c ume nts ISO / G LP / USP SUM (to ta l), MAX (ma ximum),
External Cal Done • Anima l We ig hing c o mp lia nc e . MIN (m inim um ), R [ra ng e
Diff. 0.00g • Dyna mic We ig hing (ma ximum - minimum)], AVE
EXT
22-Mar-17 11:13AM • De nsity d e te rmina tio n IDNR ( a v e ra g e ) , SD ( sta n d a rd
Name : • Be lo w b a la nc e Fa c ility to inp ut IDNR numb e r d e v ia t io n ) a n d C V Statistical

............ we ig hing fo r ind ivid ua l re a d ing s. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 612 C Y 1202 C Y 2202 C Y 3102 C Y 4102 C Y 6102 C Y 8102 C Y 2202DR

C a p a c ity 600 g m 1200 g m 2200 g m 3100 g m 4100 g m 6100 g m 8100 g m 200 / 2100 g m
Re a d a b ility 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.001 / 0.01 g m
Re p e a ta b ility (sd ) 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.002 / 0.02 g m
Line a rity (+/ -) 0.02 g m 0.02 g m 0.02 g m 0.02 g m 0.02 g m 0.03 g m 0.02 g m 0.003 / 0.03 g m
Pa n Size (mm / inc h) Ø 110 198 x 205 / 7.8” x 8.0” 128x128 / 5.1” x5.1”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Disp la y
C a lib ra tio n Auto ma tic Exte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full C a p a c ity
O p e ra ting Te mp . 15º to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 89.5 212 x 342.5 x 271
We ig ht Ap p ro x 5.5 kg
C a t No . 1063 0612 1063 1202 1063 2202 1063 3102 1063 4102 1063 6102 1063 8102 1063 2212
Ma xim um Pric e Rs./ Pc . 30000.00 32000.00 34000.00 40000.00 48000.00 89000.00 108000.00 51000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

162 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Top Loading Precision Balance
CY-C Series
PRINT FO RMATS
24-Mar-2017 11:22AM GLP
Aczet GLP
PCS
Model CY 3102C
Ser. no. 9021161
Ver. no. r0.0.04 Brillia nt re a da b ility %
ID 1234567 Brig ht b a c klit d isp la y w ith
LID 7654321 15mm d ig its. ANI

nRef 50pcs
Nref 40.00 g G LP Che
+ 50 pcs Built-in c lo c k ma ke a ll yo ur
+ 1999.97 g
+ 9999.85 ct d o c ume nts ISO / G LP / USP PIPT

+ 50 pcs c o mp lia nc e .
DEN
24-Mar-17 11:23AM
IDNR
Name:
Fa c ility to inp ut IDNR numb e r Form
............ fo r ind ivid ua l re a d ing s.
AIR

22-Mar-17 11:13AM RS 232C / USB FIL

Aczet A b id ire c tio na l RS 232C d a ta
Model CY 3102C
Ser. no. 9021161
C Y 612C o nly in te rfa c e o r USB m a ke s
c o m m unic a tio n w ith PC / UNIT
Ver. no. r0.1.04
ID 1234567 Applic a tio n : Printe r e a sie r. PC
Displa y RS 232
Calibration: Internal
• We ig hing Brig ht Ba c klit LC D d isp la y with S ta tis tic a l C a lc u la tio n USB

W-ID ............ • Ne t / To ta l 15mm he ig ht. Func tio n

Temperature 29.378°C • C he c k We ig hing The b a la nc e d isp la y a nd / o r U
Set + 2000.00g Pe rfe c t Se lf Auto C a lib ra tio n o utp ut sta tistic a l c a lc ula tio n
Diff. -0.31g
• Pe rc e nta g e We ig hing
• We ig ht a c c umula tio n (In b a la nc e with suffix “C ”) d a ta a s No . (numb e r o f d a ta ),
• Pie c e c o unting W h e n t h e a m b ie n t SUM (to ta l), MAX (ma ximum), INT
Internal Cal Done • Anima l We ig hing te mp e ra ture c ha ng e s b y a MIN (m inim um ), R [ra ng e PSAC
Diff. 0.00g sp e c ific va lue o r o nc e a (ma ximum - minimum)], AVE
• Dyna mic We ig hing
22-Mar-17 11:13AM • De nsity d e te rmina tio n d e fine d tim e inte rva l ha s ( a v e ra g e ) , SD ( sta n d a rd Statistical

Name : • Be lo w b a la nc e e la p se d , it p e rfo rms Exte rna l d e v ia t io n ) a n d C V

............ we ig hing C a lib ra tio n. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 612C C Y 1202C C Y 2202C C Y 3102C C Y 4102C C Y 6102C C Y 8102C

C a p a c ity 600 g m 1200 g m 2200 g m 3100 g m 4100 g m 6100 g m 8100 g m
Re a d a b ility 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m
Re p e a ta b ility (sd ) 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m 0.01 g m
Line a rity (+/ -) 0.02 g m 0.02 g m 0.02 g m 0.02 g m 0.02 g m 0.03 g m 0.02 g m
Pa n Size (mm / inc h) Ø 110 198 x 205 / 7.8” x 8.0”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Disp la y
C a lib ra tio n Mo to rise d Inte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15º to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 89.5
We ig ht Ap p ro x 5.5 kg
C a t No . 1064 0612 1064 1202 1064 2202 1064 3102 1064 4102 1064 6102 1064 8102
Ma xim um Pric e Rs./ Pc . 41000.00 43000.00 46000.00 51000.00 59000.00 100000.00 119000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

163 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Precision Balance
CG Series

• Auto c a lib ra tio n with e xte rna l we ig ht.

• Ea sy to re d LC D Disp la y.
• Multifunc tio n we ig hing units.
• Auto ze ro tra c king , lo w b a tte ry fo r c o ntinue s use .
• O ve rlo a d p ro te c tio n d e sig n.
• S.S. We ig hing Pa n le ve l ind ic a to r Q uic k we ig hing a c c ura te re sult.

Mo de l C G 203L C G 303L
C a p a c ity 200 g m 300 g m
Re a d a b ility 0.001 g m 0.001 g m
Re p e a ta b ility (+/ -) 0.001 g m 0.001 g m
Line a rity (+/ -) 0.002 g m 0.002 g m
Pa n Size (mm/ inc ) 90 Ø 90 Ø
C a t No . 1067 0203 1067 0303
Ma xim um Pric e Rs./ Pc . 24000.00 29000.00

• Sta nd a rd RS 232 Inte rfa c e fo r d a ta o utp ut.

• LED 7 Dig it Disp la y fo r e a sy vie wing .
• Sta nd a rd d ua l sid e o r Exte rna l Disp la y.
Sta nda rd Fe a ture s • Auto -Ze ro Tra c king , Auto ma tic Exte rna l C a lib ra tio n
• 8 Diffe re nt we ig hing units suc h a s g , c t, To la e tc .
• C o mp a c t a nd sp a c e sa ving . • Pie c e C o unting & Pe rc e nta g e We ig hing Func tio n
• La rg e Sta inle ss ste e l p la te . • With le ve ling b ub b le a nd a d justa b le fe e t fo r the sta b ility o f
• Ac c ura te to within ± d ivisio n a t full lo a d . sc a le .
• O ve rlo a d Pro te c tio n. • Inb uilt re c ha rg e a b le b a tte ry fo r c o ntinue s use .
• Da rt Shie ld fo r mo re a c c ura te re a d ing . • AC o r DC Po we r sup p ly : O utp ut AC / DC Ad a p te r.

Mo de l C G 302 C G 602 C G 1202

C a p a c ity 300 g m 600 g m 1200 g m
Re a d a b ility 0.01 g m 0.01 g m 0.01 g m
Re p e a ta b ility (sd ) ± 0.03 g m ± 0.03 g m ± 0.03 g m
Line a rity (+/ -) 0.01 g m 0.01 g m 0.01 g m
Pa n Size (mm) 118 Ø 145 x 125
C a t No . 1066 0302 1066 0602 1066 1202
Ma xim um Pric e Rs./ Pc . 16000.00 18000.00 22000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

164 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Moisture Analyzer
MB Series
M e m o ry o f e a c h m o i s t u re
De te rm ina tio n
This b e ing the mo st ve rsa tile fe a ture o f
Ac ze t MB Se rie s, it sto re s la st 1000
d e te rmina tio n, so yo u c a n mo nths, this
ma ke it Uniq ue a nd DEPENDABLE, no
o the r instrume nt c a n o ffe r this.

Pa sswo rd pro te c tio n

Pa ssw o rd p ro te c tio n p re ve nts the
una utho rize d a c c e ss to the sto re d d a ta
& a lte rna tio ns o f the p a ra me te rs thus
e nsuring its se c urity.

Da ta Sto ra g e
This uniq ue fe a ture o ffe rs the fle xib ility to
c ho o se the d a ta sto ra g e mo d e a s p e r
use r a p p lic a tio n.

%M Switch-off criteria (T)

#4
Moisture Content

T
Target
#3
#2
#1
C o nne c tivity
Time Do yo u ha ve to w rite d o w n the
me a sure me nt o f se ve ra l d o ze n sa mp le s
e a c h d a y No t a ny mo re tha nks to the
Re lia b ility sta nd a rd USB, RS 232 a nd ETHERNET
Re lia b le re sult d e p e nd o n c o rre c t inte rfa c e , yo u c a n no w c o nve nie ntly
me tho d o lo g y. Se le c t the in inte llig e nt tra nsfe r yo ur d a ta to yo ur PC a nd
func tio n, ke y in the re fe re nc e va lue a nd c o ntinue wo rking o n it the re , o r p rint it
m a xim u m tim e . Th e M B sw if tly Brillia nt Mo no te c h se nso r with a na lytic a l o ut d ire c tly o n AC ZETp rint.
c a lc ula te s a p p ro p ria te sw itc h-o ff pre c isio n
c rite ria a uto ma tic a lly to ma tc h the Th e o u tsta n d in g m e a su re m e n t Me tho d Wise
re fe re nc e va lue to the la st d e c ima l p e rfo rma nc e o f MB se rie s is b a se d o n Sto ra g e a llo ws the use r to sto re 25
p la c e . Yo u c a n sa ve this p a ra me te r a s AC ZET b rillia nt a na lytic a l w e ig hing mo isture d e te rmina tio n re sults in e a c h
me tho d . Inte llig e nt e ffic ie ntly d e ve lo p s Te c hno lo g y MO NO TEC H. The fo rth m e tho d , use r c a n sto re suc h 40
yo ur me tho d a nd sa ve yo ur time in a ny d e c ima l p la c e is no t d isp la ye d b ut is m e tho d s. m e tho d w ise sto ra g e is
a re a w he re d iffe re nt p ro d uc ts a re me a sure d a nd use d in c a lc ula tio n o f suita b le fo r a p p lic a tio n in r&D o r Q ua lity
a na lyze d fo r the ir mo isture c o nte nt. Yo u hig hly p re c ise re sults, g ive s hig he st Assura nc e w he re the re a re m o re
c o uld ne ve r ma tc h yo ur re fe re nc e me a sure me nt se c urity. numb e r o f d iffe re nt p ro d uc t (Sa mp le )
va lue with suc h a c c ura c y. to b e a na lyze d .
with ne w Ac ze t Mo isture Ana lyze r yo u
c a n a c hie v e hig he r p ro d uc tiv ity
witho ut c o mp ro mising o n q ua lity in yo ur
d a ily b usine ss c ha lle ng e s, sinc e it is
DIVERSE a nd c a n b e p ro g ra mme d
a c c o rd ing to the ind ivid ua l ne e d s o f the G ra ph
p e rso n. No ma tte r if use r is fro m q ua lity Ta nks to g ra p hic a l d isp la y, use r c a n
a ssura nc e , ma nufa c turing o r R&D. vie w a uto up d a ting g ra p h o f the d rying
p ro c e ss with the c ha ng e in the mo isture
le ve l.

Ultra Fa st unifo rm he a ting

Uniq ue ly d e sig ne d c irc ula r ha lo g e n
la mp a nd re fle c to rs e nsure s utmo st Sta tistic s Fe a ture s like w e ig ht in a ssist a nd
ra p i d h e a t i n g , s h o rt e n t h e This c a n d isp la y a nd p rint sta tistic s fo r sta nd b y te mp e ra ture he lp s use r to
me a sure me nt time we ll e ng ine e re d the la st 9999 me a sure me nts b a se d o n imp ro ve re p ro d uc ib ility b y ta king sa me
he a ting c ha m b e r e nsure unifo rm e a c h Me tho d o r Ba tc h ma king this id e a l a mo unt sa mp le we ig ht a nd simila r
he a ting to a c hie ve e xa c t re sult with inte llig e nt instrum e nt fo r R&D a nd c lim a tic sta te fo r e a c h m o isture
e xc e p tio na l re p ro d uc ib ility. Pro d uc tio n b o th. d e te rmina tio n.
 Temper at ur e Cal i br at i on ABC PHARMA CO.
Repor t LAB UNI T 3
----------------------- -----------------------
ACZET 26/ 04/ 2014 05: 30PM
Model no. MB 200 ACZET Ba tc h wise
Ser i al no. M2120057 Model no. MB 200 sto ra g e a llo w s use r to c re a te 100
Ver . no. 1. 1. 3. 25 Ser i al no. M2120057
Us er I D MAUSAM Ver . no. 1. 1. 3. 25 b a tc he s & sto re ma ximum 1000 d a ta
Us er I D MAUSAM
Temp c an c ount 13
------------------------ with no re stric tio n o n the d a ta sto ra g e
Temp c al dat e 31/ 12/ 2011
Temp c al t i me 01: 59PM
Met hod 19: NACL p e r b a tc h. Ba tc h wise sto ra g e is suita b le
PRODUCTI ON LI NE
------------------------ AFTER FI LTERATI ON fo r a p p lic a tio n in p ro d uc tio n whe re
Temper at ur e1 100º C: 102º C St ar t of anal y s i s : the re a re mo re numb e rs o f sa mp le s to
Aut omat i c No b e a na lyze d fo r the sa me p ro d uc t.
Temper at ur e2 200º C: 200º C St abi l i t y YES
Del ay YES
Temp Cal i br at i on done Heat i ng STANDARD Multip le units o f me a sure me nt re sults
Temp 110º C
------------------------ Sw- of f MANUAL %M, %D, %R (ra tio ), G m/ Lt, %M Atro , %D
St anby OFF
26/ 04/ 2014 06: 20PM
Comi l e OFF Atro , ma ke it mo st c o nve nie nt fo r e a c h
Name :
.................
I ni t . wt . +3. 918g use r.
------------------------
------------------------ 00: 00: 30hr s + 4. 23 %M
00: 01: 00hr s + 3. 08 %M
ISO / G LP c o m plia nc e printo ut 00: 01: 30hr s + 3. 08 %M Va rio us he a ting p ro file like sta nd a rd ,
It he lp s id e ntify ho w, whe n & who p e rfo rme d the mo isture 00: 02: 00hr s + 3. 46 %M G e ntle , Ra p id , Ste p & Hig h te mp e ra ture
00: 02: 30hr s + 3. 46 %M
d e te rmina tio n. Hig hly fle xib le use r c o nfig ura b le p rint ------------------------ he a ting ma ke ’ s it p o ssib le to a na lyze
Fnl . wt . +4. 794 g a ny p ro d uc t sa mp le .
fo rma t with 4 use r ID ma ke s it c usto mize d ye t tra c e a b le 00: 00: 16hr s + 0. 13 %M
d o c ume nt in c o mp lia nc e to SO P’ s a nd G LP re g ula tio n
Las t wt . c al 26/ 04/ 2012
ma king MB Se rie s mo st a c c e p ta b le in e a c h ind ustry. Va rio us switc h o ff c rite ria fro m Auto ,
Eve ry suc c e ssful c a lib ra tio n is b e e n tra c ke d a nd re c o rd Las t t emp c al 31/ 12/ 2011 Ma nua l, Time d , Use r De fine d G / T, Use r
with inc re me nta l numb e rs a lso la st suc c e ssful c a lib ra tio n Name : De fine d %U/ T, Inte llig e nt m a ke s it
re p o rt sto re d in me mo ry ma ke s it e ve n mo re fle xib le a nd .................. p o ssib le to a c hie ve utmo st a c c ura te
c o nve nie nt. ------------------------ re sult.
26/ 04/ 2014 05: 32PM

Mo de l MB 54 MB 40 MB 50 MB 120 MB 200
Ma x. C a p a c ity 50 g m 40 g m 50 g m 120 g m 200 g m
Pre c isio n o f re a d o ut ma ss 0.1 mg 1 mg 1 mg 1 mg 1 mg
Pre c isio n o f re a d o ut o f mo isture 0.0001% 0.001% 0.001% 0.001% 0.001%
Re p e a ta b ility (Sa mp le 2g ) (sd ) 0.05% 0.1% 0.1% 0.1 % 0.1 %
Re p e a ta b ility (Sa mp le 10g ) (sd ) 0.02% 0.03% 0.03% 0.03% 0.03%
Disp la y info rma tio n 0.002% 0.002% 0.03% 0.03% 0.03%
Units o f Me a sure me nts %M, %D, %R (ra tio ), G m/ Lt, %M Atro , %D Atro
Sta tistic s Me tho d wise fo r e a c h ind ivid ua l 40 me tho d s o r
Ba tc h wise fo r e a c h ind ivid ua l 100 b a tc he s fo r la st 999 re sults
Te c hno lo g y Infra Re d Ha lo g e n
Te mp e ra ture Ra ng e Ma x. to 175°C (O p tio na l to 250ºC ) - P.O .R.
Te mp e ra ture Inc re me nt Inte rva l 1ºC
He a ting Pro file Sta nd a rrd , G e ntle , Ra p id , Ste p s, Hig h Te mp e ra ture
Switc h o ff C rite ria Auto , Ma nua l, Use r De f We ig ht / Time , Use r De f % unit / Time , Inte llig e nt
Auto Me tho d De ve lo p me nt Inte llig e nt
Me tho d Me mo ry 40
Ba tc h Me mo ry 100
Me tho d d e sig na tio n Alp ha Nume ric
Se ria l Numb e r Ye s
C o mp ile Ye s (Me tho d Linking )
Te mp e ra ture o f wo rk 15ºC to 40ºC
Disp la y G ra p hic a l LC D Disp la y with LED b a c k
Da ta Inte rfa c e RS 232C Bid ire c tio na l, USB, Ethe rne t, Ps2
Print G LP / G MP C o mp lia nt, Use r C o nfig ura b le
Pa sswo rd Me tho d , Se tting , Print Fo rma t, Da ta De le t, C a lib ra tio n, Drying
Po we r Sup p ly 230V / 50Hz o r 115V / 60Hz
Po we r C o nsump tio n (Wa tt) Ma x 415
Ho using Dime nsio n (WxDxH) mm 211x 342 x 178
Ne t Wt. / G rp ss Wt. 7 Kg / 8 kg
Pa c king Dime nsio n (mm) (L x W x H) 400 x 340 x 300 / 15.8” x 13.4” x 11.9”
C a t No . 1042 0054 1042 0040 1042 0050 1042 0120 1042 0200

Ma xim um Pric e Rs./ Pc . 181000.00 108000.00 134000.00 147000.00 164000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

166 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
High Precision Balance
24-Mar-2017 CY Series
PRINT FO RMATS
11:22AM
Aczet GLP
GLP
Model CY 3101
Ser. no. 9021102 PCS
Ver. no. r0.0.04
ID 1234567
%
LID 7654321
nRef 50pcs
ANI
Nref 40.00 g
+ 50 pcs
+ 1999.97 g Che
+ 9999.85 ct
+ 50 pcs
PIPT
24-Mar-17 11:23AM
Name:
DEN
............
Form

AIR
22-Mar-17 11:13AM Displa y
Aczet Winning te c hno lo g y
Brig ht Ba c klit LC D d isp la y with
Model CY 3101 m o n o t e c h t e c h n o lo g y , FIL
Ser. no. 9021102 15mm he ig ht.
whic h e nsure s lo ng -te rm hig h
Ver. no. r0.1.04
ID 1234567 Applic a tio n :
a c c ura c y.
Fa st re sults
La t e s t p o w e rf u l UNIT
Calibration: External S ta tis tic a l C a lc u la tio n
• We ig hing m ic ro p ro c e sso r, sh o rte n s PC
• Ne t / To ta l Func tio n
W-ID ............ re sp o nse time just 3se c . RS 232
Temperature 29.378°C • C he c k We ig hing The b a la nc e d isp la y a nd / o r
Set + 2000.0g o utp ut sta tistic a l c a lc ula tio n USB
• Pe rc e nta g e We ig hing G LP
Diff. -0.3g d a ta a s No . (numb e r o f d a ta ),
• We ig ht a c c umula tio n Built-in c lo c k ma ke a ll yo ur
• Pie c e c o unting SUM (to ta l), MAX (ma ximum), U
d o c ume nts ISO / G LP / USP
External Cal Done • Anima l We ig hing MIN (m inim um ), R [ra ng e
c o mp lia nc e .
Diff. 0.0g • Dyna mic We ig hing (ma ximum - minimum)], AVE
• De nsity d e te rmina tio n ( a v e ra g e ) , SD ( sta n d a rd EXT
22-Mar-17 11:13AM IDNR
• Be lo w b a la nc e d e v ia t io n ) a n d C V
Name : Fa c ility to inp ut IDNR numb e r Statistical

we ig hing (c o e ffic ie nt o f va ria tio n).

fo r ind ivid ua l re a d ing s.
............

Mo de l C Y 3101 C Y 4101 C Y 6101 C Y 8101 C Y 10001

C a p a c ity 3100 g m 4100 g m 6100 g m 8100 g m 10000 g m
Re a d a b ility 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Re p e a ta b ility (sd ) 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Line a rity (+/ -) 0.2 g m 0.2 g m 0.2 g m 0.2 g m 0.2 g m
Pa n Size (mm / inc h) 198 x 205 / 7.8” x 8.0”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Disp la y
C a lib ra tio n Auto ma tic Exte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15º to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 89.5
We ig ht Ap p ro x 5.5 kg
C a t No . 1068 3101 1068 4101 1068 6101 1068 8101 1068 1000
Ma xim um Pric e Rs./ Pc . 35000.00 38000.00 40000.00 44000.00 51000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

167 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
High Precision Balance
24-Mar-2017 CY-C Series
PRINT FO RMATS
11:22AM
Aczet GLP
GLP
Model CY 3101 Fa st re sults PCS
Ser. no. 9021102
Ver. no. r0.0.04 La t e s t p o w e rf u l
ID 1234567 m ic ro p ro c e sso r, sh o rte n s %
re sp o nse time just 3se c .
LID 7654321
ANI
nRef 50pcs
Nref 40.00 g G LP
+ 50 pcs Built-in c lo c k ma ke a ll yo ur Che
+ 1999.97 g d o c ume nts ISO / G LP / USP
+ 9999.85 ct
+ 50 pcs
c o mp lia nc e . PIPT

24-Mar-17 11:23AM IDNR DEN

Name: Fa c ility to inp ut IDNR numb e r
............ fo r ind ivid ua l re a d ing s. Form

AIR

22-Mar-17 11:13AM FIL

Aczet Winning te c hno lo g y
Model CY 3101
Ser. no. 9021102 m o n o t e c h t e c h n o lo g y ,
Ver. no. r0.1.04 whic h e nsure s lo ng -te rm hig h UNIT
ID 1234567 Applic a tio n : a c c ura c y. PC
Displa y RS 232
Calibration: Internal
• We ig hing Brig ht Ba c klit LC D d isp la y with S ta tis tic a l C a lc u la tio n USB
W-ID ............ • Ne t / To ta l 15mm he ig ht. Func tio n
Temperature 29.378°C • C he c k We ig hing The b a la nc e d isp la y a nd / o r U
Set + 2000.0g • Pe rc e nta g e We ig hing Pe rfe c t Se lf Auto C a lib ra tio n o utp ut sta tistic a l c a lc ula tio n
Diff. -0.3g
• We ig ht a c c umula tio n (In b a la nc e with suffix “C ”) d a ta a s No . (numb e r o f d a ta ),
• Pie c e c o unting W h e n t h e a m b ie n t SUM (to ta l), MAX (ma ximum), INT
Internal Cal Done • Anima l We ig hing te mp e ra ture c ha ng e s b y a MIN (m inim um ), R [ra ng e
Diff. 0.0g PSAC
• Dyna mic We ig hing sp e c ific va lue o r o nc e a (ma ximum - minimum)], AVE
22-Mar-17 11:13AM • De nsity d e te rmina tio n d e fine d tim e inte rva l ha s ( a v e ra g e ) , SD ( sta n d a rd Statistical

Name : • Be lo w b a la nc e e la p se d , it p e rfo rms Exte rna l d e v ia t io n ) a n d C V

............ we ig hing C a lib ra tio n. (c o e ffic ie nt o f va ria tio n).

Mo de l C Y 3101C C Y 4101C C Y 6101C C Y 8101C C Y 10001C

C a p a c ity 3100 g m 4100 g m 6100 g m 8100 g m 10000 g m
Re a d a b ility 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Re p e a ta b ility (sd ) 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Line a rity (+/ -) 0.2 g m 0.2 g m 0.2 g m 0.2 g m 0.2 g m
Pa n Size (mm / inc h) 198 x 205 / 7.8” x 8.0”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric LC D Disp la y
C a lib ra tio n Mo to rise d Inte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15º to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) mm 212 x 342.5 x 89.5
We ig ht Ap p ro x 5.5 kg
C a t No . 1069 3101 1069 4101 1069 6101 1069 8101 1069 1000
Ma xim um Pric e Rs./ Pc . 47000.00 49000.00 51000.00 56000.00 63000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

168 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
Industrial Precision Balance
CY-HC / CY-H Series
GLP
Winning te c hno lo g y GLP
Mo no te c h te c hno lo g y, whic h
e n su re s lo n g - te rm h ig h PCS
a c c ura c y.
%
Fa st re sults
La t e s t p o w e rf u l
m ic ro p ro c e sso r te c hno lo g y, ANI
sho rte ning re sp o nse time fo r
fa ste r re sults, typ ic a l re sp o nse
Che
time is just 3 se c o nd s.

O ptio na l DEN
Exte rna l Ba tte ry Ba c kup .

S ta t i s t ic a l C a lc u la t io n Form

Func tio n
The b a la nc e d isp la y a nd / o r
o utp ut sta tistic a l c a lc ula tio n UNIT
d a ta a s No . (numb e r o f d a ta ),
SUM (to ta l), MAX (ma ximum), PC
RS 232
MIN (m inim um ), R [ra ng e
USB (ma ximum - minimum)], AVE USB
Pe rfe c t Se lf Auto C a lib ra tio n O p tio na l USB inte rfa c e inste a d o f RS ( a v e ra g e ) , SD ( sta n d a rd
(In b a la nc e with suffix “C ”) 232C inte rfa c e c a n b e o rd e re d . d e v ia tio n ) a n d C V
W h e n th e a m b ie n t te m p e ra tu re (c o e ffic ie nt o f va ria tio n). PSAC
c ha ng e s b y a sp e c ific va lue o r o nc e a Brillia nt re a da b ility
d e fine d time inte rva l ha s e la p se d , it Brig ht Ba c klit d isp la y with its 15-mm Applic a tio n
p e rfo rms Exte rna l C a lib ra tio n. d ig its a re p la in to se e , und e r a ny lig hting • Be lo w b a la nc e we ig hing INT
c o nd itio ns. • Pie c e c o unting
Statistical

G LP • Pe rc e nt We ig hing
Built in c lo c k ma ke a ll yo ur d o c ume nts Bid ire c tio na l RS-232C d a ta inte rfa c e is • C he c k We ig hing
ISO / G LP c o mp lia nc e . a no the r sta nd a rd fe a ture . • De nsity C a lc ula tio n

Mo de l C Y 15001HC C Y 25001HC C Y 35001HC C Y 15001H C Y 25001H C Y 35001H

C a p a c ity 15 kg 25 kg 35 kg 15 kg 25 kg 35 kg
Re a d a b ility 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Re p e a ta b ility (sd ) 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m 0.1 g m
Line a rity (+/ -) 0.2 g m 0.2 g m 0.2 g m 0.2 g m 0.2 g m 0.2 g m
Pa n Size (mm / inc h) 400 x 300 / 15.7” x 11.8”
Re sp o nse Time 2 - 3 Se c .
Disp la y Alp ha Nume ric a l LC D Ba c klite Disp la y with A.E.P.
C a lib ra tio n Mo to rise d Inte rna l C a lib ra tio n Auto m a tic Exte rna l C a lib ra tio n
Units o f me a sure g m, mg , c t, G N, mo , o z, d wt, mo m, Ba t, MS
Ta re Ra ng e Full
O p e ra ting Te mp . 15ºC to 35ºC
-6
Se nsitivity Drift. ± 2p p m (2 x 10 / ºC )
Pro te c tio n Use r Ad ministra tio n & Pa sswo rd Pro te c tio n.
Ap p lic a tio n Mo d e s PC S, % We ig hing , Anima l / Dyna mic We ig hing C he c k We ig hing ,
Auto ma tic De nsity, De te rmina tio n, Fo rmula tio n Auto ma tic Sta tistic C a lc ula to r e tc .
Po we r Sup p ly A/ C Ad a p to r 230V o r 115V / +/ -20% 50-60Hz
C o mp lia nc e ISO , G LP / G MP USP C o mp lia nc e
Ho using Dim. (WxDxH) 517 x 302 x 130
We ig ht Ap p ro x 15 kg
C a t No . 1070 1500 1070 2500 1070 3500 1071 1500 1071 2500 1071 3500
Ma xim um Pric e Rs./ Pc . 135000.00 155000.00 175000.00 107000.00 127000.00 175000.00

Spe c ific a tio n a re sub je c t to c ha ng e witho ut prio r no tic e .

169 Im a g e s sho wn a re fo r illustra tio ns purpo se o nly.
 O ptio na l Ac c e sso rie s

Fe a ture s o f Da ta Printe r :
• AC ZET’ s STATISTIC AL PRINTER is id e a l fo r ro utine la b o ra to ry a p p lic a tio n.
• G LP / G MP c o nfo rm d o c ume nta tio n o f yo ur re sults.
• Do t Ma trix Printe r, p ro vid e s e a sily re a d a b le re c o rd s o n no rma l p a p e r.
• C o mp le te d o c ume nta tio n o f a ll d a ta inc lud ing c a lib ra tio n, we ig hing re sults,
c o rre c t d a te a nd time info rma tio n e ve n a fte r p o we r fa ilure .
• Da te , Time , Sta tistic a nd To ta liza tio n func tio ns
• Wid th : 57.5 ± 0.5mm C o re Dia me te r : 8mm Min.
• Ba ud Ra te : 1200, 2400, 4800, 9600, 19200

Cat Mo de l Ma xim um
No . Pric e Rs./ Pc .

1046 0000 C PR 02 46060.00

De nsity Kit Se t :

Cat Mo de l Ma xim um
No . Pric e Rs./ Pc .

1047 0000 C DK 01 33240.00

Te m pe ra ture Se nso r :

Cat Mo de l Ra ng e Ma xim um
No . °C Pric e Rs./ Pc .

1048 0000 C TK - X01 30-200 24700.00

Alum inum Dish

Cat Mo de l Dia Q ty pe r Ma xim um

No . mm Pa c k Pric e Rs./ Pa c k

1049 0000 LBA - X25 90 40 7800.00

Ba tte ry Ba c k- up unit

Cat Mo de l Ma xim um
No . Pric e Rs./ Pc .

1050 0000 LBA - X01 9100.00

IQ , O Q , PQ do c um e nts Pric e o n Re q ue st

170
 Sta nda rd Te st We ig hts

Sing le We ig hts, E2 C la ss o f Ac c ura c y

Cat De sc riptio n Ma xim um

No . Pric e Rs./ Pc .

1052 0018 500 g with NABL C a lib ra tio n C e rtific a te 39150.00

1052 0019 1 kg with NABL C a lib ra tio n C e rtific a te 47850.00
1052 0020 2 kg with NABL C a lib ra tio n C e rtific a te 58000.00
1052 0021 5 kg with NABL C a lib ra tio n C e rtific a te 88450.00

We ig ht Bo x, E2 C la ss Ac c ura c y

Cat De sc riptio n Q ty Ma xim um

No . Pric e Rs./ Pc .

1056 0001 Sta nd a rd C a lib ra tio n we ig ht Se t in b o x, 1 134125.00

E2 C la ss Ac c ura c y, 1 mg to 200 g
with NABL C a lib ra tio n C e rtific a te
1056 1001 Sta nd a rd C a lib ra tio n we ig ht Se t in b o x, 1 71920.00
E2 C la ss Ac c ura c y, 1 mg to 500 mg
with NABL C a lib ra tio n C e rtific a te

Sing le We ig hts, F1 C la ss o f Ac c ura c y

Cat De sc riptio n Ma xim um

No . Pric e Rs./ Pc .

1053 0018 500 g with NABL C a lib ra tio n C e rtific a te 7975.00

1053 0019 1 kg with NABL C a lib ra tio n C e rtific a te 8700.00
1053 0020 2 kg iwith NABL C a lib ra tio n C e rtific a te 11600.00
1053 0021 5 kg with NABL C a lib ra tio n C e rtific a te 20300.00

We ig ht Bo x, F1 C la ss Ac c ura c y

Cat De sc riptio n Q ty Ma xim um

No . Pric e Rs./ Pc .

1058 0001 Sta nd a rd C a lib ra tio n we ig ht Se t in b o x, 1 46400.00

F1 C la ss Ac c ura c y, 1 mg to 200 g
with NABL C a lib ra tio n C e rtific a te
1058 1001 Sta nd a rd C a lib ra tio n we ig ht Se t in b o x, 1 26825.00
F1 C la ss Ac c ura c y, 1 mg to 500 mg
with NABL C a lib ra tio n C e rtific a te

171
 Digital Overhead Stirrer, Rivotek

Overhead stirrer is suitable for mixture of high viscosity liquid or

solid-liquid. Widely used in chemical synthesis, pharmaceutical,
physical and chemical analysis, petrochemical, cosmetics, health
care, food, biotechnology and other fields.

Features :
• High reliability, long continuous service, outstanding performance
• Cover the speed range from 0 to 2200 RPM, the speed is accurate
and controlled
• Brushless DC motor drive, low noise and maintenance free
• LCD displays actual speed
• Overload protection, motor would automatically stop in case of
continuous overload

Specifications
Max. Stirring Volume of H2O (Ltrs) 40 20
Power (W) 130 70
Votage (VAC), Frequency (Hz) 230, 50 230, 50
Speed range (RPM) 50-2200 50-2200
Speed Display LCD LCD
Speed display resolution (RPM) ±1 ±1
Max torque (Ncm) 60 40
Viscocity max (mPas) 50000 10000
Chuck range diameter (mm) 0.5-10 0.5-10
Dimensions (WxHxD mm) 83x220x186 83x220x186
Weight (kg) 2.8 2.6
Protection class IP42 IP42 Digital Overhead
Working temperature (°C) 5-40 5-40 Stirrer
Permissible Humidity (%) 80 80

Cat Description Maximum

No. Price
Rs. / Pc.
3001 040 Overhead Stirrer with LCD display, Max Stirring Volume 40 Ltrs, including Universal 61200.00
plate stand & crossed stirrer, shaft length 40 cm, stirrer diameter 5 cm
3001 020 Overhead Stirrer with LCD display, Max Stirring Volume 20 Ltrs, including Universal 50999.00
plate stand & crossed stirrer, shaft length 40 cm, stirrer diameter 5 cm
* Available till stocks last

172
 Premium Digital Hot Plate Stirrer NEW

Features :
• Brushless DC motor for a long maintenance-free life
• Stirring speeds upto 2200 RPM allows easy stirring of even
highly viscous liquids
• Maximum temperature upto 550°C from room temperature,
Accuracy: ± 1°C
• Timer range: 1 to 999 min. and infinite mode
• 3 intelligent heating modes to suite your precision
requirements
• Auto Restart Mode: Restarts the hotplate after power is
restored with same parameters
• Capacity upto 20L suitable for large batches of samples
• Robust nanocrystaline ceramic heating plate offers high
resistance to chemical & temperature shocks
• Isolated electric components with a safe drain channel for
accidental spillage
• Safe temperature setting upto 575 °C to prevent temperature
to raise beyond set limits irrespective of situation
• Slip detection feature prevents escaping of stir bar & ensures
constant mixing of even viscous samples
• Keypad lock to prevent accidental changes of parameters
• Option of selecting temperature units: °C/ °F
• Dedicated Display for both Set & Actual Temperature
• PT-1000 temperature sensor generates error codes
pertaining to it's contact with the media.
• Option to select plate or probe temperature display
• Pulse mode for thorough stirring of media by changing the
direction of stirring
• Program mode enables user to store upto 99 different
programs

Specifications iStir HP 550

Motor Type BLDC Motor
Number of Stirring positions 1
Stirring Quantity 20 L (Max.) H2O
Stirring Bar Length 25 mm (Max.)
Power Consumption 1250 W
Heating Temperature Range Room Temperature to 550°C
Speed Control 10 RPM/Step
Set-up Pate Material Ceramic
Housing Material Aluminum Alloy
Protection Class IP21
Timer Advances Series 1 min to 999 min & infinite mode
Programmable Pulse 30 to 99 Sec.
Set-up Plate Dimensions 180X180 mm
Unit Dimensions 330X220X115 mm
Weight 5.4 kg

Cat Product Description Maximum

Price
No. Code
Rs. / Pc.
3004 300 HS20 - 1001 Hot Plate Magnetic Stirrer – 220V, Max Temp. 550°C 53955.00

173
 Digital Hotplate Stirrer NEW

Features :
• DC Motor for better performance
• Safe Temperature setting upto 345°C
• Variable speed from 200-2200 RPM
• Variable timer from 1 to 999 min. and infinite mode
• Microprocessor controlled
• Variable temperature setting from room temperature to 320°C, Accuracy: ± 1%
• Large clear display
• Power intermittent mode: Auto restart mode after power restores for remaining operation
• Option of selecting temperature units: °C/ °F
• Spacing saving design/ small footprint
• Separate display for speed & temperature/ time
• PT-1000 temperature probe
• Option of selecting plate material while placing order

Specifications iStir HP 320

Capacity 10L (max.) H2O
Power Consumption 650 W
Heater Temperature Ambient to 320°C
Variable Speed 200 to 2200 RPM in steps of 10 RPM
Run Time 1 to 999 min. & infinite
Set-up Plate Dimensions 140 mm (5 inches)
Set-up Plate Material Ceramic Coated SS
Housing Material ABS Plastic
Weight 2.2 kg
Dimensions 156 X 248 X 148 mm
Protection Class IP21

Cat Product Description Maximum

Price
No. Code
Rs. / Pc.
3004 001 HS20-3212 Hotplate Magnetic Stirrer, Max Temperature 320°C with Ceramic Coated SS top 30870.00

Smart Personal Centrifuge NEW

Features :
• Electric break for immediate stopping of device from opening the lid
• Highly durable robust construction
• Intelligent design to provide carbon dust insulation and safe drainage provision
• Compact design to save valuable space & can be used in fume hoods & cold rooms
• Speed of 6000 RPM for enhanced performance
• Speed accuracy of ± 100 RPM
• Closed rotor design for sample protection

Specifications iFuge M08

Rotor Capacity 8 place closed rotor for 1.5/2.0 ml microtubes
Speed (RPM) 6000
Speed RCF (g) 2000
Digital Display Yes
Electronic Safety breaks Yes
Noise Level < 55 db
Power Supply 220VAC, 50Hz
Power Consumption 15 W
Dimensions 162 X 157 X 115 mm

Cat Product Description Maximum

Price
No. Code
Rs. / Pc.
3012 1000 M08-1212 Micro Centrifuge, fix speed of 6000 RPM 9734.00

174
 Motor Less Ultra Slim Magnetic Stirrer NEW

Features :
• No Moving parts -truly maintenance free
• Low aspect ratio (just 13/14 mm thick)
• Software driven gradual acceleration
• Microprocessor controlled with last run memory feature
• Pulse mode-reverses the direction every 30 seconds for proper mixing
• Universal power supply –small wall mount power adapter
• IP 65 compliant design (water spill resistant)
• Corrosion resistant SS top surface to fight harsh chemicals
• Synchronized speed setting (Multi-position )

Specifications iStir UNO iStir Quattro

Max RPM 1500 1200
Max Setting From 15 RPM to every 50 RPM
Capacity ml (H2O) 1 X 800 4 x 400
Time setting 1 to 99 min
Digital Display Yes
Recommended bar length mm 25
Pulse function Yes
Sync Mode NA Yes
Lat run memory Yes
Dimensions (W x D x H) in mm 124 x 191 x 14.5 457 x 126 x 13.4
Power Consumption 5W 13 W
Weight 400 gm 1.5 Kg
Protection class IP 65 compliant design (water spill resistant)

Cat Product Description Maximum

Price
No. Code
Rs. / Pc.
3006 100 MS01-1111 Motor less ultra slim single position magnetic stirrer with 1500 RPM 12360.00
3006 200 MS01-4110 Motor less ultra slim 4 position magnetic stirrer with 1200 RPM 24720.00

Optional Accessories
Cat Product Description Maximum
Price
No. Code
Rs. / Pc.
3006 000 SB25 Magnetic bar (L X D) 25x 8 mm 268.00

175
 Vortex Mixer NEW

Features : (Mini Vortex Mixers)

• Tiny Vortex with small footprint
• BLDC motor for maintenance free long life
• Smart & robust design- Press activation & suspension
• Robust construction with dia cast aluminum base and rubber pads for stable
& salient operation

Features : (Vortex Mixers)

• Brushless DC motor fitted with ball bearing for
efficient noiseless operation
• Adjustable speed range with accuracy of ± 5%
• Time setting 0 to 999 min (iSwix VT)
• Programmable pulse mode function (iSwix VT)

• 3-way switch for touch, continuous & stand-by

mode
• Visual indication marker for max speed

Specifications iSwix Jr iSwix Jr VT iSwix iSwix VT

Max RPM 4500 2800 4200
Orbital diameter mm 4.5 4.0
Motor type BLDC AC Synchronous BLDC
Digital Display No No Yes
Max Load Capacity gm 100 500
Max tube diameter 30 mm test tube Optional Tubes adapters available
Press activation Yes 3 way switch
Speed setting No Yes Yes
Time setting No No Yes
Dimensions (W x D x H) in mm 100 x 100 x 70 205 x 136 x 138.5
Power supply 24 VDC 220 VAC, 50 Hz 24 VDC
Power Consumption 14 W 20 W
Weight 0.5 kg 3 kg

Cat Product Description Maximum

Price
No. Code
Rs. / Pc.
3003 100 iSwix Jr Analog tiny vortex mixer with fixed speed 9680.00
3004 100 iSwix Jr VT Analog tiny vortex mixer with variable speed 10815.00
3003 200 iSwix Analog vortex mixer with variable speed, 230 VAC operated 11897.00
3004 200 iSwix VT Digital vortex mixer with variable speed & time 16727.00

Optional Accessories
Cat Product Description Maximum
Price
No. Code
Rs. / Pc.
3005 001 VM-A1 Universal Attachment 1030.00
3005 002 VM-A3 Micro plate attachment for iSwix/iSwix VT Vortex Mixer 1030.00
3005 003 VM-A4 Flask attachment for iSwix/iSwix VT Vortex Mixer 1030.00
3005 004 VM-A2 Micro Centrifuge Tubes attachment for iSwix/iSwix VT Vortex Mixer 1545.00
3005 005 VM-A6 Round Disc for for iSwix/iSwix VT Vortex Mixer 1545.00

176
 ra
ie
iv
R
DIAPHRAGM TYPE COMPRESSORS CUM VACUUM PUMPS
Portable, Oil-free vacuum pumps
Salient Features:
• No Lubrication required.
• Noiseless.
• Absolutely portable.
• Totally oil free construction.
• Practically maintenance free.
• All parts made from Special graded aluminium die cast material for 7001 0001 / 1001 7001 0002 / 1002
light weight and good strength.
• Diaphragms are made of special 2 ply Nylon, reinforced neoprene rubber,
• Special diaphragms are available (Teflon, Viton) on request at extra cost.
• Valves made of SS 316 material.
• Built in micro suction filter.
• Extra Large bearings for trouble free and smooth running.
• Pumps available with single as well as three phase motors. 7001 0004 / 1004 7001 0006 / 1006
• Pumps available with flame proof motors (Cat. No. 7001 0012).
• Pumps available with 12/24/48 volts DC supply (Cat no.7001 0011).
Please specify voltage while ordering.
• Pumps available with Chemical resistive parts( PP, Teflon contact parts)
(Cat. No. 7001 0007/8)

Applications as vacuum pump Applications as compressor

• Laboratories • Flame photometer 7001 0007 7001 0008
• Pollution control equipments • Agitation of chemicals in electro-plating
• Material handling equipments • Agitation of film in drying tank
• Desoldering station • Oil-free spray painting
• Medical instruments • Artist air brush
• Dentists • Operating small pneumatic tools
• Chemical analysis • Laminating press
• Suction machines • Nebuliser 7001 0009 / 1009 7001 0010 / 1010
• Photographic developing machines • Plastic welding

Note : 1. Vacuum gauge and regulator are fitted with Cat. No. 21202 500 only as standard supply.
Moisture trap if required will be supplied at extra cost. For specific application mentioned above other than
general laboratory use, please consult Riviera Mumbai office before ordering. 2. Avoid using the pump to
handle air with heavy dust & organic, acidic or basic vapors. 3. The values of max pressure, max vacuum
& max flow mentioned above are measured very close to the pump head within tolerance of ±3%. The
mechanical gauge wherever supplied carries reading accuracy of ±1 division and not covered under
7001 0012 / 1012 21202 500 / 1500
warranty.

Warranty Clause for Vacuum Pumps:

The above equipment is warranted with following conditions:
• All Rivotek, vacuum pumps will carry warranty of 12 months from the date of invoice against manufacturing defects. The company
will repair or replace the parts going defective free of cost during the warranty period. The warranty for electric/electronic parts
dose not hold good if the equipment is connected to fluctuating mains voltage beyond ± 10% of the standard supply voltage i.e.
230v, 50hz.
• Malfunctioning of the pump caused due to entry of foreign material inside the pump is not covered under warranty.
• Warranty is not applicable to damages occurring due to accident, negligence and misuse by the user.
• Complaints should be communicated to the warrantor in writing.

177
 ra
ie
iv
R
Portable, Oil-free vacuum pumps
Cat Features Max Max Max. Approx. Motor Approx. Maximum
Flow Press. Vac. Weight HP Dimensions Price
No. LPM PSIG Inch Hg kg mm Rs/Pc
7001 0001 Single stage & 15 25 22 2.7 1/20 175 x 110 x 140 8785.00
7001 0002 Single stage &
reduced dimensions 15 25 22 2.5 1/20 150 x 110 x 140 8785.00
7001 0004 Double stage in parallel 25 25 22 4.2 1/16 220 x 120 x 140 11415.00
7001 0006 Single stage 45 40 22 6.2 1/8 220 x 120 x 180 13205.00
7001 0007 Chemical resistive Parts 30 10 22 5.8 1/8 235 x 155 x 200 15225.00
7001 0008 Chemical resistive Parts 50 10 22 8.7 1/4 325 x 155 x 200 21475.00
7001 0009 Double stage in series 45 60 27 9.0 1/4 290 x 120 x 180 17020.00
7001 0010 Double stage in parallel 75 40 22 9.0 1/4 290 x 120 x 180 17020.00
7001 0012 Flame Proof Motor 45 35 22 18.0 1/4 (FPM)* 325 x 150 x 250 30450.00
21202 500 Double stage with VGR 15 35 27 4.1 1/16 220 x 110 x 140 12590.00

Portable Vacuum Pumps Oil-Free Air Compressors with Teflon Diaphragm

Cat Max Max Max. Approx. Motor Approx. Maximum

Flow Press. Vac. Weight HP Dimensions Price
No. LPM PSIG Inch Hg kg mm Rs/Pc
7001 1001 15 25 22 2.7 1/20 175 x 110 x 140 12370.00
7001 1002 15 25 22 2.5 1/20 150 x 110 x 140 12370.00
7001 1004 25 25 22 4.2 1/16 220 x 120 x 140 15025.00
7001 1006 45 40 22 6.2 1/8 220 x 120 x 180 16830.00
7001 1009 45 60 27 9.0 1/4 290 x 120 x 180 20815.00
7001 1010 75 40 22 9.0 1/4 290 x 120 x 180 20815.00
7001 1012 45 35 22 18.0 1/4 (FPM)* 325 x 150 x 250 33820.00
21202 1500 15 35 27 4.1 1/16 220 x 110 x 140 16210.00

Optional Accessories

Cat Description Maximum

Price
No. Rs/Pc
7001 0513 Vacuum gauge and regulator 1190.00
7001 0514 Pressure gauge and regulator 1190.00
7001 0519 Moisture trap 2110.00

178
 ra
ie
iv
R
BATHS AND CIRCULATORS
Water Bath with Circulator, Rivotek
Body Material - MS Painted with Powder coating • Bath inner material - SS 304. • Digital display with microprocessor based
PID Controller to ± 1.0 °C accuracy by using PT 100 sensor. • Temperature Range ambient to 95 °C • Fitted with Circulator
for uniformity of temperature inside the Bath.
Cat Temp. Working Space Cover No. of Maximum
Range (including Rack Price
No. °C circulator) mm Rs/Pc
50121 001 Amb. to 95 °C 300 x 175 x 160 SS Gabled 2 31000.00
50121 002 Amb. to 95 °C 350 x 300 x 160 SS Flat Not provided 33030.00
Note: - For supplying the racks, test tube dimensions have to be mentioned.

Standard size of Test Tube for Water Bath Circulator is give below
Rack 1 Rack 2
0.5 ml 1.5 ml 13 mm 16 mm 19 mm
15 Holes 10 Holes 8 Holes 3 Holes 3 Holes

Circulator for Water Bath, Rivotek

Portable device with Pump. Digital display with microprocessor based PID Controller temperature.
Temperature ranges from ambient to 80 °C and is controlled to ±1.0 °C using PT-100 as sensor.
Circulator is supplied without metal or glass tank.
Note: For using the above circulator, the bath or tank should have a minimum depth of 160 mm and the volume of water
should be 15 to 20 Liters.
Cat Maximum
Price
No. Rs/Pc
50121 501 18565.00

Water Bath with Outbath Circulation, (Rear View) Rivotek

Cat Temp. Working Space Cover Outbath Maximum

Range (including Circulation Price
No. °C circulator) mm Rs/Pc
50121 0015 Amb. to 95 °C 300 x 175 x 160 SS Gabled Provided 30825.00
50121 0025 Amb. to 95 °C 350 x 300 x 160 SS Flat Provided 35120.00

Constant Temperature Water Bath, Rivotek

Double walled construction. The gap between the two walls filled with glass wool insulation. Heating is by immersion type
heaters. Lid made of Stainless Steel.
Specifications
• Digital display — With PID Controller by using PT 100 sensor, accuracy:± 0.5 °C
• Temperature Range — (Ambient +5) to 95.0 °C
• Temperature distribution system — A Circulator pump is mounted for temperature. Uniformity inside the bath.
• Safety controls — Digital safety controller is provided to avoid Overshoot Temperature.
• Mains Power — Works on 230 V AC single phase 50Hz.
Cat Chamber Size Chamber Size Rating Volume Inner Outer Maximum
in LxDxH Watt in Chamber Chamber Price
No. inches in mm ltrs. Rs/Pc
50121 018 18"x12"x10" 460 x 305 x 255 1.5K.W. 18.0 S.S.304 MS Powder coated 72225.00
50121 027 22"x12"x10" 560 x 305 x 255 2.0K.W. 27.0 S.S.304 MS Powder coated 74075.00
50121 047 26"x14"x12" 660 x 355 x 305 2.5K.W. 47.0 S.S.304 MS Powder coated 75915.00
50122 018 18"x12"x10" 460 x 305 x 255 1.5K.W. 18.0 S.S.304 S.S.304 78115.00
50122 027 22"x12"x10" 560 x 305 x 255 2.0K.W. 27.0 S.S.304 S.S.304 83605.00
50122 047 26"x14"x12" 660 x 355 x 305 2.5K.W. 47.0 S.S.304 S.S.304 102840.00

179
 ra
ie
iv
R
Oil Bath, Rivotek
Bath Material - SS 304, Single walled without insulation,
Heater material used in Bath - SS 316, Bakelite Handles are provided to bath.
Temperature range Ambient +5 to 200 °C by separate temperature control unit with ± 1.0°C
accuracy controlled by microprocessor based PID Controller using a PT-100 sensor.
A unit can be kept 2 mtrs away from the oil bath.
Oil bath can be used for heating round bottom glass flasks .

Cat Capacity Dimensions Maximum

Litres Dia x Depth Price
No. mm Rs/Pc
50131 001 1 165 x 90 17200.00
50131 002 2 205 x 115 18545.00
50131 003 3 225 x 130 19555.00
50131 004 5 270 x 155 21460.00
50131 005 10 335 x 190 24680.00
50131 006 20 400 x 220 27140.00

HEATING BLOCK
Heating Block, Rivotek
The body made of MS Powder coated.
Temperature range ambient to 100 °C controlled to ±1.0 °C by
digital display with microprocessor based PID Controller display using
PT 100 as sensor.

Cat Capacity Maximum

Price
No. Rs/Pc

50031 001 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50mm size 20985.00
for accommodating 0.5ml., 1.5ml Eppendorf & 12mm test tubes.
50031 003 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50mm size 20985.00
for accommodating 0.5ml., 1.5ml Eppendorf & 16mm test tubes.
50031 004 Heating Block with 3 nos. interchangeable aluminium blocks of 75 x 50 x 50mm size 20985.00
for accommodating 0.5ml., 1.5ml Eppendorf & 19mm test tubes.
50031 005 Single Heating Block with 150 x 75 x 50mm size accommodating 20985.00
50 tubes of 10mm Dia. for LAL test
50031 002 Single Heating Block with 150 x 100 x 50mm size accommodating 23370.00
60 tubes of 10mm Dia. for LAL test
Note: Blocks for using with any other test tubes can be supplied as per specific requirements at extra cost.
Please mention the dimensions of the tubes while placing the order.

HOT PLATES
Hot Plate Round – RIVOTEK : Round surface heating plate, body made of MS Powder coated. Top Plate made of cast
iron.Temp upto 350°C Fitted with Thermostatic Control.
Cat Dimension Rating in Maximum
in inches kW Price
No. Rs/Pc
50020 0008 8 1.2 10015.00
50020 0009 9 1.5 14545.00
50020 0012 12 2.0 18265.00

180
 ra
ie
iv
R
Hot Plate Rectangular – RIVOTEK : Rectangular surface heating plate, body made of MS Powder coated. Top Plate made
of cast iron.Temp upto 350°C Fitted with Thermostatic Control.
Cat Dimension Rating in Maximum
in inches kW Price
No. Rs/Pc
50021 1012 10 x 12 1.0 12640.00
50021 1016 10 x 16 1.2 16280.00
50021 1218 12 x 18 2.0 18265.00
50021 1824 18 x 24 3.0 31305.00

HEATING MANTLES & EXTRACTION (KJELDAHL) APPARATUS

Heating Mantles, Rivotek : MS powder coated Aluminium metal body up to 20 ltrs., MS body for 50, 100 & 200 ltrs. with
energy regulator, switch and indicating lamp, max temp (approx. 400 °C).
Cat Model Capacity Watts Voltage Maximum
Price
No. ml Rs/Pc
9000 0002 Heating Mantles with Energy Regulator 100 60 230 2175.00
9000 0003 Heating Mantles with Energy Regulator 250 85 230 2485.00
9000 0004 Heating Mantles with Energy Regulator 500 150 230 2830.00
9000 0005 Heating Mantles with Energy Regulator 1,000 200 230 3110.00
9000 0006 Heating Mantles with Energy Regulator 2,000 300 230 3235.00
9000 0007 Heating Mantles with Energy Regulator 3,000 450 230 3730.00
9000 0008 Heating Mantles with Energy Regulator 5,000 2 x 300 230 4520.00
9000 0009 Heating Mantles with Energy Regulator 10,000 2 x 600 230 6885.00
9000 0010 Heating Mantles with Energy Regulator 20,000 3 x 665 230 9540.00

Heating Mantles (Digital), Rivotek :

Construction of these laboratory heating mantles are similar to standard heating mantle but the temperature is controlled
by digital temperature controller. Temperature range Ambient +5 to 400 °C
These laboratory heating mantles are designed to take only one size of flask. Various sizes are available to fit around
bottom flasks of capacity from 1000 ml to 5000 ml. The snug fit of the heating surface, which is in close contact with the
flask, ensures good thermal efficiency.
Cat Model Capacity Watts Maximum
Price
No. ml Rs/Pc
9100 0005 Heating Mantles - Digital 1000 200 25755.00
9100 0006 Heating Mantles - Digital 2000 300 27425.00
9100 0007 Heating Mantles - Digital 3000 450 30645.00
9100 0008 Heating Mantles - Digital 5000 2 x 300 33145.00

Extraction and Kjeldahl Apparatus for research laboratories, Rivotek

MS powder coated. Available with 4 & 6 heaters with energy regulator control,
max temp (approx. 400 °C).

Cat Capacity No. of Watts Maximum

Controls Price
No. ml Rs/Pc
9001 0001 100 4 400 11445.00
9001 0002 250 4 600 12520.00
9001 0003 500 4 800 12995.00
9001 0004 1000 4 1200 14425.00
9001 0006 100 6 600 15145.00
9001 0007 250 6 900 15380.00
9001 0008 500 6 1200 16575.00
9001 0009 1000 6 1800 20745.00

181
 ra
ie
iv
R
Optional Accesories for Extraction and Kjeldahl Apparatus, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
9002 0001 Finger Clamp with Boss Head 1500.00

Test Tube Rotator, Rivotek

Speed Variable from 5 - 50 RPM (Without Load)
Permanent magnet DC geared motor.
Noise-free silent operation.
Constant current speed control circuit for steady speed.
Powder coated M.S.body.
(Note : While placing the order, please specify the dimensions
of the tubes you propose to use as per details given below)

Cat Description Maximum

Price
No. Rs/Pc
50022 001 Test Tube Rotator with 0.5 ml Eppendorf tubes 24 Nos. & 1.5 ml Eppendorf tubes 24 Nos. 17180.00
50022 002 Test Tube Rotator with ∅ 16/19 mm Test tubes 12 Nos. 17180.00
50022 003 Test Tube Rotator with ∅ 30 mm Test tubes 8 Nos. 17180.00

Optional Accesories for Test Tube Rotator, RIVOTEK

Cat Description Maximum

Price
No. Rs/Pc

50022 501 Digital Timer (0 - 99 min) 9245.00

50022 502 Digital RPM 9245.00

Universal Cell-Mixer, Plate Type, Rivotek

Suitable for mini tissue culture work and blood suspensions without sedimentation or foaming.
Also suitable for vigorous agitation and end to end mixing.
Tubes can be mounted at any angle from horizontal to vertical, tubes with respect to axis of rotation.
Different sizes from 12 mm to 25 mm dia can be accommodated.
Speed Variable 5 - 50 rpm (wihtout load)

Cat Maximum
Price
No. Rs/Pc

50023 001 Universal Cell Mixer with 0.5 ml (∅ 8 mm) Eppendorf tubes 12 Nos. 14450.00
50023 002 Universal Cell Mixer with 1.5 ml (∅ 11 mm) Eppendorf tubes 12 Nos. 14450.00
50023 003 Universal Cell Mixer with ∅ 13 to 27 mm Test tubes 8 Nos. 14450.00

182
 ra
ie
iv
R
Incubator Shaker (RT-PLUS) - STD Model, Rivotek
Specifications:
Outer Construction : MS powder coated.
Inner Construction : SS 304
Samples viewing : Transparent Glass window.
Inbuilt Lighting : Built in lighting attachment with low wattage provided with External
Switch on the front panel.
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Shaking speed : 20-200 Orbital strokes per min. (without load)
Additional SS Tray : For Petri dishes and small beakers.
Temperature range : (5 °C above ambient) to 70 °C, Accuracy: ± 0.5 °C.
Uniformity control : Fitted with recirculation fan in the chamber for uniformity of temperature.
Platform capacity : As per the table chart given below for tray size suitable clamps capacity.
Display Control : Microprocessor based PID control of Accuracy ± 0.5 °C by using
PT 100 Sensor.
Speed Indicator : Digital Speed Indicator on the front panel.
Mains Power : Works on 230 V AC single phase 50Hz.

Special Features
Motor : Brushless 3 phase Induction Motor, specially design for 24 hrs cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase Output.
Amplitude : 25 mm dia Orbital motion

Cat Tray Size Inner Chamber Outer Chamber Heater Digital Maximum
in Size in mm Size in mm Watts Speed Price
No. mm LxDxH LxDxH Indication Rs/Pc
50083 003 425 x 425 500 x 510 x 500 550 x 520 x 520 650 Yes 165980.00

Spring Loaded SS Clamps (removable) for Incubator Shaker: OPTIONAL

(To be ordered separately as per the user’s requirement)
Cat Flask No. of SS lotus clamps required for tray size Maximum
Capacity 425 x 425 mm Price
No. ml Rs/Pc
50081 501 50 25 205.00
50081 502 100 25 215.00
50081 503 250 16 225.00
50081 504 500 16 300.00
50081 505 1000 4 420.00

Bench Top Incubator, Rivotek

Exterior Material : MS Powder coated.
Interior Material : SS 304
Temperature Range : Ambient+5 to 60 °C
Temperature Controller : Digital display with microprocessor based PID Controller with PT 100 sensor.
Accuracy : ±0.5 °C.
Samples viewing : Transparent glass window cut out on front door of 1 Sq Ft
In-built lighting : Built-in LED lighting attachment provided with external switch on front panel.
LCD Volt Meter : For monitoring input AC voltage.
Uniformity Control : The recirculation fan fitted inside achieves uniformity of Temperature.
Mains Power : Works on 230 V AC single phase 50Hz.

Cat Working Heater Maximum

Chamber size Price
No. in mm Watt Rs/Pc

50151 001 300 x 260 x 300 350 26230.00

183
 ra
ie
iv
R
INCUBATORS & SHAKERS
Incubator - Shakers, Rivotek
Temp. Range (Ambient +5) to 60 °C
Digital display with microprocessor based PID Controller with PT 100 sensor having resolution ±1.0 °C
and accuracy ±1°C. Fitted with re-circulation fan to maintain temperature uniformity.
The body material is MS powder coated; inner material is SS 304 ; Tray material is SS.
Drive mechanism is powered by Permanent Magnet Geared DC motor.
Continuous operation limit, maximum upto 10-12 hours

Incubator with Microplate Shaker Mechanism, Rivotek

Cat Tray size Chamber Size Stroke Stroke Speed Maximum

in in Length per min. Price
No. mm mm Rs/Pc
50092 001 180 x 150 270 x 255 x 100 1 mm dia. orbit 100 to 1500 27665.00
2 plates of
96 wells can
be placed.

Incubator with Orbital Shaker Mechanism, Rivotek

Exterior Material : MS Powder coated.
Interior Material : SS 304
Temperature Range : Ambient+5 to 60 °C
Temperature Controller : Digital display with microprocessor based PID Controller with PT 100 sensor.
Accuracy : ±0.5 °C.
Samples viewing : Transparent glass window cut out on front door of 1 Sq Ft
In-built lighting : Built-in LED lighting attachment provided with external switch on front panel.
RPM Shaking speed : 20 to 200 RPM without load.
Uniformity Control : The recirculation fan fitted inside achieves uniformity of Temperature.
Mains Power : Works on 230 V AC single phase 50Hz.

Cat Tray size Chamber Size Speed Stroke Stroke Speed Maximum
in LxDxH Indication Length per min. Price
No. mm in mm (without load) Rs/Pc
50082 001 325 x 325 400 x 425 x 450 No 25 mm dia. 20 to 200 48650.00
50082 002 325 x 325 400 x 425 x 450 Yes 25 mm dia. 20 to 200 72495.00
50082 003 425 x 425 500 x 525 x 500 No. 25 mm dia. 20 to 200 63590.00
50082 004 425 x 425 500 x 525 x 500 Yes 25 mm dia. 20 to 200 85395.00
Note : SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed below)

Orbital Shaker, Rivotek

Body Material is MS painted with Epoxy Powder.
Tray Material is SS.
Shaking speed: 20-200 Orbital strokes per min. (without load)
Permanent Magnet Geared DC motor with 25 mm dia. motion is used
Continuous operation limit, maximum upto 10-12 hours

Cat Tray Digital Speed Maximum

size in Indication Price
No. mm Rs/Pc

50081 001 325 x 325 No 20215.00

50081 002 425 x 425 No 35360.00
50081 003 325 x 325 Yes 35090.00
50081 004 425 x 425 Yes 46500.00
Note: SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed below)

184
 ra
ie
iv
R
Reciprocating Shaker, Rivotek
• Body Material is MS painted with Epoxy Powder.
• Tray Material is SS.
• Shaking speed: 10-200 strokes per min. (without load)
• Permanent Magnet Geared DC motor with 35 mm stroke length is used
• Continuous operation limit, maximum upto 10-12 hours
Cat Tray size Digital Maximum
Speed Price
No. mm Indication Rs/Pc
50101 001 325 x 325 No 19250.00
50101 002 425 x 425 No 33675.00
50101 003 325 x 325 Yes 33420.00
50101 004 425 x 425 Yes 44290.00
Note: SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed below)

Compulsory Accessories

Spring loaded SS lotus clamps (removable) for holding the Flasks in Orbital and Reciprocating Shakers to be ordered
separately
Cat Flask capacity No. of SS Lotus Clamp required for tray size Maximum
in 325 x 325 425 x 425 750 x 750 Price
No. ml mm mm mm Rs/Pc
50081 501 50 16 25 48 205.00
50081 502 100 16 25 48 215.00
50081 503 250 8 16 48 225.00
50081 504 500 8 16 25 300.00
50081 505 1000 4 4 16 420.00

Optional Accesories for Orbital / Reciprocating Shaker, RIVOTEK

Cat Description Maximum

Price
No. Rs/Pc

50022 501 Digital Timer (0 - 99 min) 9245.00

Water Bath Shakers, Rivotek

• Body Material : MS Painted with powder coating.
• Tray material : Stainless Steel. SS cover is provided.
• Temp. Range (Ambient +5) to 95 °C
• Digital Display with microprocessor based PID Controller of Accuracy ±1°C.by using PT
100 as sensor
• Shaking speed 20 - 200 / 10-100 stroke per min. (without load)
• Supplied with SS Gabled Cover.
• Continuous operation limit, maximum upto 10-12 hours

Cat Type Tank size Tray size Stroke Speed Maximum

LxDxH LxDxH per min. Price
No. in mm in mm Rs/Pc
50111 001 Reciprocating (Horizontal) 370 x 300 x 160 250 x 250 x 110 10 -100 51750.00
50111 002 Reciprocating (Horizontal) 470 x 350 x 160 350 x 300 x 110 10 -100 62305.00
50111 003 Orbital 450 x 425 x 200 325 x 325 20 -200 69515.00
Note: SS Lotus clamps for holding the flasks in the above shakers to be ordered separately (listed next page)

185
 ra
ie
iv
R
Compulsory Accessories

Spring loaded SS lotus clamps (removable) for holding the Flasks in the Water Shakers to be ordered separately

Cat Flask capacity No. of SS Lotus Clamp required for tray size Maximum
in 250 x 250 325 x 325 350 x 300 Price
No. ml mm mm mm Rs/Pc
50081 501 50 9 16 20 205.00
50081 502 100 9 16 20 215.00
50081 503 250 5 8 9 225.00
50081 504 500 4 8 6 300.00
50081 505 1000 - 4 - 420.00

Optional Accesories for Water Bath, RIVOTEK

Cat Description Maximum

Price
No. Rs/Pc

50022 503 Digital Safety Controller 9245.00

50022 502 Digital RPM 9245.00

Microplate Shaker, Rivotek

• Body Material is MS painted with Epoxy Powder. Tray Material is SS.
• Shaking speed: 100-1500 strokes per min
• Permanent Magnet Geared DC motor with 1mm dia. Orbital motion is used.
Cat Tray Maximum
size Price
No. Rs/Pc
50091 001 180 x 150 mm. With springs 11640.00
2 multi well plates can be
placed on the tray

Water Bath Double-walled (Thermostatic Controlled)

Specifications
• Inner chamber is made of thick gauge S.S. 304 grade sheet, with minimum joint. STD/GMP
• Outer MS with Powder Coating only for - STD model
• Outer made up of S.S. 304 grade sheet only for GMP model
• Specially made extra long heating elements for high heat dissipation, uniformity & longer life.
• The gap between the two walls is filled with glass wool.
• Lid is made up of S.S. 304 with 6 holes & 12 holes of 3”dia.
• Provided with indicating lamps and on/off switch.
• Temp range is above (Ambient to +5 to 99 °C)
• Operation on 240 volts AC
Cat Cap Size Holes Watt Inner Outer Maximum
in in Chamber Chamber Price
No. Ltrs inches Rs/Pc
50192 000 9 14 x 10 x 4 6 1000 S. S. 304 MS Powder Coated 14425.00
50192 001 15 17 x 13 x 4 12 2000 S. S. 304 MS Powder Coated 20415.00
50191 000 9 14 x 10 x 4 6 1000 S. S. 304 S. S. 304 18245.00
50191 001 15 17 x 13 x 4 12 2000 S. S. 304 S. S. 304 25280.00

186
 ra
ie
iv
R
Water Bath with Digital PID Controller, Rivotek
Specifications
• Inner chamber is made of thick gauge S.S. 304 grade for STD / GMP
• Outer Body with powder coating only for – STD Model.
• Outer Body made of S.S. 304 grade only for – GMP Model.
• Concentric rings of 3" dia i.e. (75 mm)
• Temperature range: Ambient + 5 °C to 99 °C
• Temperature controller - Digital PID Controller.
• Provided with indicating lamp & on/off switch
• Electrically operated on 230V AC single phase power

Cat Cap Model Size Holes Watt Inner Outer Maximum

in in Chamber Chamber Price
No. Ltrs inches Rs/Pc
50192 002 9 STD 14 x 10 x 4 6 1000 S. S. 304 MS Powder Coated 22775.00
50192 003 15 STD 17 x 13 x 4 12 2000 S. S. 304 MS Powder Coated 28765.00
50191 002 9 GMP 14 x 10 x 4 6 1000 S. S. 304 S. S. 304 26590.00
50191 003 15 GMP 17 x 13 x 4 12 2000 S. S. 304 S. S. 304 33625.00

Water Bath with Digital PID & Safety Controller, Rivotek

Specifications
• Inner chamber is made of thick gauge S.S. 304 grade for STD / GMP.
• Outer Body with powder coating only for – STD Model.
• Outer Body made of S.S. 304 grade only for – GMP Model.
• Concentric rings of 3" dia i.e. (75 mm).
• Temperature range: Ambient + 5 °C to 99 °C
• Temperature controller - Digital PID Controller.
• Safety controller - Digital safety controller to avoid Overshoot of
SET Temperature.
• Provided with indicating lamp & on/off switch.
• Electrically operated on 230V AC single phase power.

Cat Cap Model Size Holes Watt Inner Outer Maximum

in in Chamber Chamber Price
No. Ltrs inches Rs/Pc

50192 004 9 STD 14 x 10 x 4 6 1000 S. S. 304 MS Powder Coated 31120.00

50192 005 15 STD 17 x 13 x 4 12 2000 S. S. 304 MS Powder Coated 37110.00
50191 004 9 GMP 14 x 10 x 4 6 1000 S. S. 304 S. S. 304 34935.00
50191 005 15 GMP 17 x 13 x 4 12 2000 S. S. 304 S. S. 304 41970.00

Optional Accesories for Water Bath with Concentric Rings

Cat Description Maximum

Price
No. Rs/Pc

50022 504 PID Controller 9245.00

50022 503 Digital Safety Controller 9245.00

187
 ra
ie
iv
R
Bunsen Burner - Digital, Rivotek : CUP fitted in S.S. housing, insulated with high density ceramic wool insulation. Control
box at bottom side finished with powder coated paint finish.

Specifications
• Size of cup : 55 mm Dia x 47 mm Ht.
• Stainless Steel cylindrical body SS 304 with mirror finish
• Control Panel made of MS
• Maximum working temp. 500 °C. Approximate Temperature.
• The temperature is controlled by digital PID temperature controller.
• Fuse fitted on backside for overload protection.(SAFETY)
• Rating: 350 W
• Operated on 230 Volts AC, 50 Hz, 1 Phase
Cat Model Type Dia Height Shape Watts Maximum
Price
No. mm mm Rs/Pc
9200 000 Bunsen Burner Refractory 55 47 Conical 350 28390.00
(Digital) crucible

PERISTALTIC PUMP
Peristaltic Pump, Rivotek
Single Channel
Body material- MS with Powder coating
Stage made up of cast aluminum with black epoxy powder paint
Rollers of cast Nylon
Supplied with 1 meter transparent silicon tube
Pumps with different flow rate are available
Cat Flow Tube size Maximum
Rates Price
No. mm Rs/Pc
50171 001 6-60 ml/Hour I. D. 1 / O. D. 3 22655.00
50171 002 10-80 ml/min I. D. 2 / O. D. 4 22415.00
50171 003 80-650 ml/min. I. D. 4 or 6 / O. D. 5 or 7 23510.00
50171 004 110-900 ml/min I. D. 6 / O. D. 9 25040.00

Optional Accessories for the above Peristaltic pump

Cat Description Maximum
Price
No. Rs/Mtr.
50171 501 Silicone Tube Size : 1 mm I.D/3mm O.D Flow Rate : 6 - 60 ml/Hour 110.00
50171 502 Silicone Tube Size : 2 mm I.D/4mm O.D Flow Rate : 10 - 80 ml/Min 130.00
50171 503 Silicone Tube Size : 5 mm I.D/7mm O.D Flow Rate : 80 - 650 ml/Min 280.00
50171 504 Silicone Tube Size : 6 mm I.D/9mm O.D Flow Rate : 110 - 900 ml/Min 450.00
50022 501 Digital Timer (0 - 99 min) 9245.00

Light Vortex Mixer, Rivotek

duty
Cat Type Used for Speed Maximum
in Price
No. RPM Rs/Pc
50141 001 Light duty-cup type Tubes & small vials Variable Speed 200 - 2800 7440.00

188
 ra
ie
iv
R
Rocking Platform, Rivotek
Body Material is MS painted with Epoxy Powder.
Tray Material is SS.
Shaking speed: 8-60 strokes per min. (without load)
Permanent Magnet Geared DC motor as driving mechanism is used
Tray Size in mm : 300 x 275 x 25
Cat No. of Maximum
Tiers Price
No. Rs/Pc
50051 001 1 16720.00
50051 002 2 19075.00

Hybridization Oven, Rivotek

The Hybridization oven is designed to use for molecular biology labs to prehybridize or hybridize the membranes used in
blotting techniques. Modern designs combine a hybridization station, active mixing capability, accurate temperature control,
into one compact bench top unit.
Specifications
• Interior Material : SS 304
• Exterior Material : MS coated powder coated
• Temperature range : (5 0C above Ambient) to 90 0C
• Observation : Viewing Glass Window is provided
• Temperature control : By Digital Display with microprocessor based PID Controller of accuracy ± 0.10 C by
using PT – 100 as Sensor
• A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed or removed from the rotor
mechanism
• One bottle can be taken out without removing the carrier. The carrier rotates with the Bottles parallel to the door at
variable speed of 2 – 15 RPM.
• Supplied without bottles, removable rocking platform SS tray is also supplied.
• Electrically operated on 230 V AC
Cat Outer Chamber Inner Chamber Volume Rating Maximum
Dimensions Dimensions in Watts Price
No. (L x D x H) mm (L x D x H) mm ltrs Rs/Pc
50161 001 700 x 535 x 540 400 x 450 x 400 70 650 166770.00

Cat Hybridization Bottle Type of Maximum No. of Maximum

Dimensions bottle Bottles Price
No. (Dia x Depth) in mm Rs/Pc
50161 501 60 x 200 Fabricated out of 6 3985.00
Borosilicate Glass with
leak proof screw cap

189
 ra
ie
iv
R
Orbital Shaker - Heavy Duty, Rivotek

Specifications
• Body Material - MS Powder coated.
• Tray Material – Stainless steel SS 304
• Shaking Speed: 20 – 250 Orbital strokes per min (Without Load)
• Operates on 230 Volts AC, Single Phase
Special Features
• VFD Drive: (Variable Frequency Drive) of 230 V, I Phase Input.
• AC motor: Brushless Induction Motor, for 24 hrs operation.
• Digital Voltmeter: With LCD display for better view in the dark room.

Cat Tray size in mm Digital Shaking Speed Maximum

Speed (without load) Price
No. Indication in RPM Rs/Pc
50081 0750 750 x 750 Yes 20 - 250 161380.00

Ultrasonic Cleaners, Rivotek

Specifications :
• Bath Material : SS 304
• Outer Body Material & Lid : SS 304
• Ultrasonic Generator : Advanced latest MOSFET/IGBT based SMPS
• Frequency : 30 ± 3 KHz
• Transducer : Imported make PZT crystals bonded on the base of the tank with weld bond technique.
• SS Basket : Provided
• Built-in Digital Timer : Provided
• Electric supply : 230V/ 50Hz AC, single phase.
• Drain : Drain valve provided at the rear side of the tank (not included for 1.5 litre model)
Cat Tank Cap Tank Clear Ultrasonic Maximum
in Size in Power Price
No. litres mm Watts Rs/Pc
1900 0015 1.5 240 x 135 x 65 50 20350.00
1900 0055 5.0 230 x 230 x 100 100 50205.00
1900 0090 9.0 300 x 240 x 150 200 67830.00
1900 0020 20.0 350 x 300 x 200 400 140000.00
1900 0030 30.0 375 x 375 x 200 500 150000.00
1900 0050 50.0 550 x 300 x 300 750 175000.00

190
 ra
ie
iv
R
Ultrasonic Processor (Sonicator), Rivotek
Specifications :
Ultrasonic Power, Watts 150 250
Ultrasonic Frequency, Khz 30
Probe Diameter mm 3 / 6 / 12 / 20
Sample Volume ml 1 -150 20 - 150
Display LED
Programmable Set 10 programs
PID Controller Microcontroller Based and Programmable
ON/OFF Pulse, sec 1 to 99
Programmable Timer, min. 1 to 99
Probe Material Titaninum Alloys (Ti-6Al-4V)
Sealed Converter PZT (Energy Converter)
Tuning Manual Tuning & Frequency Control
Temperature Range, °C 0°C to 150°C
Temperature Sensor PT 100 Sensor
Operating Voltage AC 220-203V & 50/60 Hz; Single phase
Standard Supply : Ultrasonic Generator, Ultrasonic Cable, Temperature Sensor (PT100), Sealed Convertor,
Probe, Wrench Set, Support Stand

Prices indicated below are

without Optional Accessories

Cat Descrption Maximum

Price
No. Rs/Pc
1700 0003 Ultrasonic Power 150 Watts with Titanium Probe Tip, 3 mm 150275.00
1700 0006 Ultrasonic Power 150 Watts with Titanium Probe Tip, 6 mm 150275.00
1700 1003 Ultrasonic Power 250 Watts with Titanium Probe Tip, 3 mm 171480.00
1700 1006 Ultrasonic Power 250 Watts with Titanium Probe Tip, 6 mm 171480.00
1700 1012 Ultrasonic Power 250 Watts with Titanium Probe Tip, 12 mm 171480.00
1700 2003 Ultrasonic Power 500 Watts with Titanium Probe Tip, 3 mm 200575.00
1700 2006 Ultrasonic Power 500 Watts with Titanium Probe Tip, 6 mm 200575.00
1700 2012 Ultrasonic Power 500 Watts with Titanium Probe Tip, 12 mm 200575.00
1700 2020 Ultrasonic Power 500 Watts with Titanium Probe Tip, 20 mm 200575.00

Optional Accessories
Cat Description Maximum
Price
No. Rs/Pc
1700 0505 Sound Enclosure 28600.00
1700 0506 Laboratory Jack 12300.00

191
 ra
ie
iv
R
Chiller Sonicator Bath, Rivotek
System : The system consists of 2 parts.
A) Ultrasonic Chamber.
B) Cooling System consisting of cooling coils, condenser & compressor of suitable capacity. This helps in maintaining the
required temperature in the Ultrasonic Chamber.

Technical Specifications :
Tank Size 10 L 20 L 30 L
Model Table Top Table Top Floor Mounted
Tank Size 12" x 10" x 6" 18" x 12" x 6" 14" x 14" x 10"
Basket Size 11" x 9" x 5" 17" x 11" x 5" 12" X 12" X 8"
Inner body material SS 304(16 SWG thickness) with rounded corners & mirror finish
Outer body material SS 304 (18 SWG thickness with matt finish)
Total Solvent Capacity 10 ltrs 20 ltrs 30 lts
Electric Supply 230V AC, 50Hz, Single phase
Power Output ( Ultrasonic) 250 watt 400 watt 500 watt
Timer 0-99 min With Digital Display of set & actual.
Temperature controller Digital temperature controller with setting range 10°C to max 30°C.
Display Resolution: 1°C
Cooling System Hermatically sealed Compressor, CFC free Refrigerant
Auto degassing Preset for 5 Min.
PSP Pulse sweep power for uniform distribution of Ultrasonic energy
Frequency 33 kHz ± 3 KHz.
Transducers Imported make PZT type bonded at the Bottom of the tank with weld bond technique
Ultrasonic Generator Advanced latest IGBT based SMPS
Drain ½” Drain with Ball valve will be provided.
Legs Rubber Bush Rubber Bush Castor Wheels
Bath Liquid Water/ Solvent
STD Accessories SS304 basket, Mains cable, SS304 Lid

Cat Tank Tank Size Overall Dimen- Ultrasonic Maximum

Capacity in inches sions in Power Price
No. Ltr LxWxH inches L x W x H Watts Rs/Pc
1910 0010 10 12 x 10 x 6 18 x 18 x 20 250 144400.00
1910 0020 20 18 x 12 x 6 24 x 20 x 20 400 166675.00
1910 0030 30 14 x 14 x 10 22 x 22 x 36 500 211075.00

192
 ra
ie
iv
R
OTHER RIVOTEK INSTRUMENTS

Laboratory Oven - STD Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
LxDxH LxDxH Price
No. in inches in cms Rs/Pc
6400 0002 5 °C above ambient (room temp) to 250 ° C 14 x 14 x 14 35 x 35 x 35 Price on Request
6400 0003 5 °C above ambient (room temp) to 250 ° C 18 x 18 x 18 45 x 45 x 45 Price on Request
6400 0004 5 °C above ambient (room temp) to 250 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6400 0005 5 °C above ambient (room temp) to 250 ° C 24 x 24 x 24 60 x 60 x 60 Price on Request
6400 0006 5 °C above ambient (room temp) to 250 ° C 24 x 24 x 36 60 x 60 x 90 Price on Request

Hot Air Oven - GMP Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
LxDxH LxDxH Price
No. in inches in cms Rs/Pc
6402 0003 5 °C above ambient (room temp) to 250 ° C 18 x 18 x 18 45 x 45 x 45 Price on Request
6402 0004 5 °C above ambient (room temp) to 250 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6402 0005 5 °C above ambient (room temp) to 250 ° C 24 x 24 x 24 60 x 60 x 60 Price on Request
6402 0006 5 °C above ambient (room temp) to 250 ° C 24 x 24 x 36 60 x 60 x 90 Price on Request

Vacuum Oven- Rectangular STD Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
LxHxD LxHxD Price
No. in inches in cms Rs/Pc
6701 0002 50 °C to 200 ° C 12 x 12 x 16 30 x 30 x 40 Price on Request
6701 0003 50 °C to 200 ° C 14 x 14 x 20 35 x 35 x 50 Price on Request
6701 0004 50 °C to 200 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6701 0005 50 °C to 200 ° C 20 x 20 x 30 50 x 50 x 75 Price on Request

Vacuum Oven- Rectangular - GMP Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
LxHxD LxHxD Price
No. in inches in cms Rs/Pc
6702 0002 50 °C to 200 ° C 12 x 12 x 16 30 x 30 x 40 Price on Request
6702 0003 50 °C to 200 ° C 14 x 14 x 20 35 x 35 x 50 Price on Request
6702 0004 50 °C to 200 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6702 0005 50 °C to 200 ° C 20 x 20 x 30 50 x 50 x 75 Price on Request

Vacuum Oven (Round)- STD Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
Dia x Depth Dia x Depth Price
No. in inches in cms Rs/Pc
6601 0001 50 °C to 200 ° C 9 x 12 22 x 30 Price on Request
6601 0002 50 °C to 200 ° C 12 x 15 30 x 38 Price on Request

193
 ra
ie
iv
R
Vacuum Oven (Round)- GMP Model, Rivotek
Cat Temp. Range Chamber Size Chamber Size Maximum
Dia x Depth Dia x Depth Price
No. in inches in cms Rs/Pc
6602 0001 50 °C to 200 ° C 9 x 12 22 x 30 Price on Request
6602 0002 50 °C to 200 ° C 12 x 15 30 x 38 Price on Request

Muffle Furnace Light Weight - STD Model, Rivotek

Cat Temp. Range Muffle size Muffle size Maximum
DxLxW DxLxW Price
No. in inches in cms Rs/Pc
6901 0001 up to 1000 °C Working temperature up to 950 °C 9x4x4 22 x 10 x 10 Price on Request
6901 0002 up to 1000 °C Working temperature up to 950 °C 10 x 5 x 5 22 x 12 x 12 Price on Request
6901 0003 up to 1000 °C Working temperature up to 950 °C 12 x 6 x 6 30 x 15 x 15 Price on Request

Muffle Furnace Light Weight - GMP Model, Rivotek

Cat Temp. Range Muffle size Muffle size Maximum
DxLxW DxLxW Price
No. in inches in cms Rs/Pc
6902 0001 up to 1000 °C Working temperature up to 950 °C 9x4x4 22 x 10 x 10 Price on Request
6902 0002 up to 1000 °C Working temperature up to 950 °C 10 x 5 x 5 22 x 12 x 12 Price on Request
6902 0003 up to 1000 °C Working temperature up to 950 °C 12 x 6 x 6 30 x 15 x 15 Price on Request

Bacteriological Incubator - STD Model, Rivotek

Cat Temp. Range DxLxW DxLxW Maximum
in inches in cms Price
No. Rs/Pc
6500 0002 5 °C above ambient (room temp) to 60 ° C 14 x 14 x 14 35 x 35 x 35 Price on Request
6500 0003 5 °C above ambient (room temp) to 60 ° C 18 x 18 x 18 45 x 45 x 45 Price on Request
6500 0004 5 °C above ambient (room temp) to 60 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6500 0005 5 °C above ambient (room temp) to 60 ° C 24 x 24 x 24 60 x 60 x 60 Price on Request
6500 0006 5 °C above ambient (room temp) to 60 ° C 24 x 24 x 36 60 x 60 x 90 Price on Request

Bacteriological Incubator GMP Model, Rivotek

Cat Temp. Range Chamber Size Chamber Size Maximum
LxDxH LxDxH Price
No. in inches in cms Rs/Pc
6502 0003 5 °C above ambient (room temp) to 60 ° C 18 x 18 x 18 45 x 45 x 45 Price on Request
6502 0004 5 °C above ambient (room temp) to 60 ° C 18 x 18 x 24 45 x 45 x 60 Price on Request
6502 0005 5 °C above ambient (room temp) to 60 ° C 24 x 24 x 24 60 x 60 x 60 Price on Request
6502 0006 5 °C above ambient (room temp) to 60 ° C 24 x 24 x 36 60 x 60 x 90 Price on Request

194
 ra
ie
iv
R
B.O.D. Incubator - STD Model, Rivotek
Cat Temp. Range Volume Chamber Size Maximum
Ltrs. / Cu. Ft. WxDxH Price
No. in cms Rs/Pc
6101 0004 5 °C to 60 ° C 120 / 04 45 x 45 x 60 Price on Request
6101 0008 5 °C to 60 ° C 200 / 08 60 x 60 x 60 Price on Request
6101 0012 5 °C to 60 ° C 324 / 12 60 x 60 x 90 Price on Request
6101 0016 5 °C to 60 ° C 450 / 16 60 x 60 x 125 Price on Request
6101 0035 5 °C to 60 ° C 1000 / 34 80 x 80 x 155 Price on Request

B.O.D. Incubator - GMP Model, Rivotek

Cat Temp. Range Volume Chamber Size Maximum
Ltrs. / Cu. Ft. WxDxH Price
No. in cms Rs/Pc
6102 0004 5 °C to 60 °C 120 / 04 45 x 45 x 60 Price on Request
6102 0008 5 °C to 60 °C 200 / 08 60 x 60 x 60 Price on Request
6102 0012 5 °C to 60 °C 324 / 12 60 x 60 x 90 Price on Request
6102 0016 5 °C to 60 °C 450 / 16 60 x 60 x 125 Price on Request
6102 0035 5 °C to 60 °C 1000 / 34 80 x 80 x 155 Price on Request

Autoclave - Fully Automatic - GMP Model, Rivotek

Cat Temp. Range Size of Working Volume Maximum
Chamber Ltrs. Price
No. in inches Rs/Pc
6302 0035 Factory set for 121 °C 12 dia x 20 ht 35 Price on Request
6302 0052 Factory set for 121 °C 14 dia x 22 ht 52 Price on Request
6302 0095 Factory set for 121 °C 18 dia x 24 ht 95 Price on Request
6302 0175 Factory set for 121 °C 22 dia x 30 ht 175 Price on Request
Imp Note:
1. Calibration certificate with IQ, OQ, and PQ Protocols will be provided only for GMP Models
2. On site validation service for GMP Models is available (P.O.R)
(Kindly make a note of this and do the needful before placing the order)

195
 ra
ie
iv
R
OPTIONAL ACCESSORIES FOR RIVOTEK INSTRUMENTS
Laboratory Oven, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6402 0501 Digital Timer of 999 minutes with auto heater cut-off Price on Request
6402 0503 Microprocessor based PID Controller with printer interface to connect to Price on Request
EPSON Dot Matrix Printer. Date, Time and Temperature can be printed whereas
Print interval can be set between 1 to 999 minutes. (Supplied without printer)
6402 0504 Safety Controller with alarm in case of overshoot of temp. Price on Request

Vacuum Oven, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6602 0502 Microprocessor based PID Controller with printer interface to connect to Price on Request
EPSON Dot Matrix Printer. Date, Time and Temperature can be printed whereas
Print interval can be set between 1 to 999 minutes.(Supplied without printer)
6602 0503 Safety Controller with alarm in case of overshoot of temp. Price on Request
6701 0501 Oil Sealed High Vacuum Pump Price on Request

Muffle Furnace, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6902 0502 Microprocessor based PID Controller with printer interface to connect to Price on Request
EPSON Dot Matrix Printer. Date, Time and Temperature can be printed whereas
Print interval can be set between 1 to 999 minutes.(Supplied without printer)
6902 0503 Safety Controller with alarm in case of overshoot of temp. Price on Request

Bacteriological Incubator, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6502 0501 Digital Timer of 999 minutes with auto heater cut-off Price on Request
6502 0503 Microprocessor based PID Controller with printer interface to connect to Price on Request
EPSON Dot Matrix Printer. Date, Time and Temperature can be printed whereas
Print interval can be set between 1 to 999 minutes.(Supplied without printer)
6502 0504 Safety Controller with alarm in case of overshoot of temp. Price on Request

196
 ra
ie
iv
R
B. O. D Incubator, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6102 0501 Microprocessor based PID Controller with printer interface to connect to Price on Request
EPSON Dot Matrix Printer. Date, Time and Temperature can be printed whereas
Print interval can be set between 1 to 999 minutes.(Supplied without printer)
6102 0504 Additional SS Trays for 4,8 & 12 cubic.ft Models Price on Request
6102 0505 Additional SS Trays for 16,29,35 cubic.ft Models Price on Request
6102 0506 Additional high temp safety to cut-off all heaters with audio-visual alarm
ensuring temp within the chamber doesn't exceed + 70 °C Price on Request

Autoclave Steam Sterilizer, Rivotek

Cat Description Maximum

Price
No. Rs/Pc
6300 0502 Digital Temperature controller with 4 sensors (3 temp+ 1 pressure) Price on Request
with printer interface for dot matrix printer (supplied without printer)

Warranty Clause for Rivotek, Instruments:

The above equipment is warranted with following conditions:
• The warranty is valid for twelve months from the date of invoice of the equipment.
• The scope of this warranty is limited to the general performance of the equipment and components used. Vacuumatic
and consumable items like fuse, heater, battery, lamp etc. are not covered under warranty.
• Complaints arising out of mishandling willful or through ignorance, negligence or resulting from accidents, attempted
repairs, and inadequate power supply, fluctuation in voltage, general wear and tear are not covered under this
warranty.
• Complaints should be communicated to the warrantor in writing.
• All genuine complaints arising from manufacturing defects will be attended to free of cost during the warranty
period.

197
 R era
ra
ie
i
iv
iv
R
TERMS & CONDITIONS
The following terms and conditions of sale and payment shall apply to all goods supplied by us unless specifically
accepted by us in writing. Acceptance of goods supplied constitutes acceptance of these terms :

‰ Prices are in Indian Rupees and are maximum recommended prices. The Authorised Dealers are at
liberty to charge lower than that stipulated here. These prices are exclusive of any delivery charges,
octroi and other non-statutory levies.
‰ Prices are exclusive of GST which shall be extra as applicable on the date of Invoice.

‰ Prices are subject to change without notice. Prices applicable on the date of supply shall be valid.

‰ Unless agreed otherwise, invoices are to be paid immediately without deduction of any discount.
‰ The price contains the standard quantities per pack for each item. It is desirable that orders are placed in
multiples thereof.

‰ Every effort shall be made to maintain quoted delivery dates. However, due to the risks and nature of
working with the glass, these dates are not in any way binding. Our contractual obligation to our customers
is subject to correct and prompt deliveries from our suppliers.

‰ No goods should be returned to us without our prior approval.

‰ All information contained in this pricelist-cum-catalogue cannot be reproduced without our written consent.

‰ Generally, our policy is to service our customers through our nationwide Authorised Dealers only.

‰ All legal relationship formed as a result of sales would be in accordance with the Indian Laws and Mumbai
shall be the place of jurisdiction for all parties and for all matters. If RIVIERA appears as a plaintiff, it will
also be entitled to start legal proceedings at any such city / town where the customers are located.

Additional Terms applicable to supply of Instruments only

‰ Warrantee : The instruments supplied shall carry warrantee of one year from the date of invoice to the
original purchaser against faulty workmanship and defect. Any part going defective will be replaced/
repaired free of cost. Vacuumatic items like fuses, lamps, bulbs, heaters, etc. are not covered under
warrantee. Again damage resulting due to accident/misuse is not covered under warrantee. Warrantee
conditions for different instruments may vary.

‰ Installation : All the instruments covered in this price list can be installed by the user with the help of
instruction manual supplied with the equipment. In case Company’s technical representative has to
undertake the installation, charges will be extra and shall be quoted on case-to-case basis.
‰ Delivery : Will be effected Ex-Mumbai within 4-6 weeks from the date of receipt of the order complete in
all respect. Exact delivery period will be intimated in the order acknowledgement. For specially
manufactured items, delivery period will be more than 6 weeks.

‰ General : Statutory levies if become applicable in future will be charged extra.

198
 R iera
ra
ie
iv
iv
R
INDEX

BALANCES BURETTES
Analytical, KERN 148 Class ‘AS’ 43
Density Determination Set, KERN 149 Class ‘AS’, Schellbach 43, 44
Bench Scale, KERN 153 Class ‘B’ 44
Hanging, KERN 154 Automatic, Class ‘AS’ 44
Platform, KERN 153 Automatic, Class ‘AS’, Schellbach 45
Pocket, KERN 152 Automatic, Class ‘B’ 45
Precision, KERN 149-151, 154 Reservoir For Automatic Burettes 45
School Balance, KERN 152
Top Loading, KERN 151 CONDENSERS
Test Weights, KERN 155 Liebig 46
Semi-Micro, ACZET 157 Liebig, Drip Tip 46
Analytical, ACZET 158-159 Allihn 46
Precision, ACZET 160-164 Graham 46
High Precision, ACZET 167-168 Double Surface 46
Industrial Precision, ACZET 169
Moisture Analyser, ACZET 165-166 CLAMPS
Accessories, ACZET 170 Plastic Clamps for Joint Fittings 85
Test Weights, ACZET 171
CONNECTION SYSTEMS 36-39
BEAKERS
Low Form 11 CAPS
Tall Form 11, 12 For Laboratory Bottles, Various Types 24-26
Philips 12 Silicone SEPTA 33
Super Duty 40
CYLINDERS
BOTTLES Class ‘B’, Nessler 47
Aspirator 13 Class ‘B’ 47
B.O.D. 13 Class ‘A’ 47, 48
Baffled 29 Class ‘A’, Schellbach 48
HPLC Reservoir 35 Class ‘B’, With Stopper 48, 49
Reagent 13, 14
Relative Density 14 DESICCATORS
Solution 14 Plain 49
TILT 30 Vacuum, Flat Flange 49, 50
Gas Washing 15, 16 Porcelain Plates 50
Wash 15 Spares For Plain & Vacuum Desiccators 50, 51
Weighing 15
Laboratory, Various Types 16, 18-23 DISHES
Laboratory, YOUTILITY, complete 27, 28 Crystalising 51
Laboratory, YOUTILITY, Tags 28 Evaporating 51
Laboratory, YOUTILITY, Label Sets 28 Petri 51-52, 85
Laboratory, Round, DURAN PURE 31, 32
Production 42 DISTILLING APPARATUS
Roux, Culture 43 With Graham Condenser 52
Wash, LDPE Plastic 43 With Friedrichs Condenser 52
Bottle Carrying System 17 Dean & Stark 53

199
 R era
ra
ie
i
iv
iv
R
INDEX

DISTILLLATION UNIT Multiparameter, Pocket Testers, EUTECH 142

All Glass, Single / Double Stage, RIVIERA 103 Turbidity Meter, EUTECH 143
Single Stage, Cabinet Type, RIVIERA 104 Calibration Solutions, EUTECH 145
Double Stage, Cabinet Type, RIVIERA 104 Digital Overhead Stirrer & Accessories, RIVOTEK 172
All Quartz, Single Stage, RIVIERA 104 Premium Digital Hot Plate Stirrer, NEUATION 173
Glass & Quartz Combination, RIVIERA 107 Digital Hot Plate Stirrer, NEUATION 174
Accessories 108 Smart Personal Centrifuge, NEUATION 174
Motor Less Ultra Slim Magentic Stirrer, NEUATION 175
EXTRACTION APPARATUS Vortex Mixer, NEUATION 176
Soxhlet Complete, RIVIERA 53 Compressors & Vacuum Pumps, RIVOTEK 177-178
Spares, RIVIERA 53 Baths & Circulators, RIVOTEK 179-180
Heating Blocks, RIVOTEK 180
FLASKS Heating Mantles, RIVOTEK 181
Conical 54-56 Extraction & Kjeldahl Apparatus,
Conical, Baffled 57 with Accesories RIVOTEK 181-182
Conical, Super Duty 40 Bench top Incubator, RIVOTEK 183
Conical, With Screw Cap 54 Incubator Shaker, RIVOTEK 183
Iodine With Stopper 56 Test Tube Rotator and Accessories, RIVOTEK 182
Flat Bottom 58, 86 Universal Cell - Mixer, RIVOTEK 182
Pear Shape, for Rotary Evaporator 58 Vortex Mixer, RIVOTEK 188
Round Bottom 58-59, 87-91 Incubators & Shakers and Accessories, RIVOTEK 187-187, 190
Filtering 59 Water Bath, Double Walled, RIVOTEK 186
Distilling 60 Water Bath, RIVOTEK 187
Kjeldahl 60 Bunsen Burner - Digital, RIVOTEK 188
Volumetric, USP 61 Peristaltic Pumps, RIVOTEK 188
Volumetric Class ‘A’, Amber & White Marking 63-64 Rocking Platform, RIVOTEK 189
Volumetric Class ‘B’, Amber & White Marking 65 Hybridization Oven, RIVOTEK 189
Ultrasonic Cleaners, RIVOTEK 190
FUNNELS Ultrasonic Processors (Sonicator), RIVOTEK 191
Long Stem 66 Chiller Sonicator Bath, RIVOTEK 192
Short Stem, Powder 66 Spectrophotometer, ANTech 123-124
Separating 66-68 Other RIVOTEK Instruments 193-197

HOTPLATES JARS
Glass Ceramic, SI ANALYTICS 102 Bell 71
MS, Powder Coated, RIVOTEK 180-181 Museum 71

INSTRUMENTS KETTLES
pH/mV/Temp, Bench Meters, EUTECH 127 Reaction 84
pH/Conductivity//ORP/Multiparameter, Spares 84
Bench Meters, EUTECH 128, 130
pH/Connectivity/TDS/ORP Handheld Meters, EUTECH 131-133 LIQUID HANDLING PRODUCTS
Salinity Pocket Testers & Handheld Meters, EUTECH 134 Digital Burette, SOLURUS 115
pH Tutor, EUTECH 137 Dispenser, Fixed & Variable Volume, CERAMUS-CLASSIC 116
pH Electrodes, EUTECH 138 Dispenser, Variable Volume, CERAMUS 116
Conductivity / TDS Pocket Testers, EUTECH 139 Diepsenser, Bottle Top, RIVIERA 122
pH/ORP Pocket Testers, EUTECH 140 Labopette, Fixed & Variable Volume, EM-TECHCOLOR 115

200
 R iera
ra
ie
iv
iv
R
INDEX

Labopette, Multi Channel with Variable Volume, SILICA WARES

EM-TECHCOLOR 115 Basin with Spout, Round Form 92
Micro Pipettor, Fixed & Variable Volume, RIVIERA 119 Basin with Spout, Deep Form 93
Micro Pipettor, Fixed & Variable Volume, RIVIERA + 120 Basin with Spout, Flat Form 93
Plastic Tips for Riviera Pipettor 120 Capsules, Circular 93
Plastic Stand for Micro Pipettors 119 Crucibles without Lid, Low Form 93
Pipette Controller. RIVIERA 121 Lid, Low Form 93
Pipetting Aids, EM-TECHCOLOR 115 Crucibles without Lid, Tall Form 94
Lid, Tall Form 94
MEMBRANE FILTER Moisture Dish with Lid 94
Membrane Filter 110-112 Volatile Matter Crucibles with Lid 94
All Glass Membrane Filter Assembly 108-109
SINTERED WARES
MICRO SLIDES Crucibles 68
Slides, Rectangular, Plain, Ground Edge 101 Buchner Funnel 69
Slides, Rectangular, Frosted, Ground Edge 101 Pipeline Filter 69

PIPETTES STOPPERS
Serological, Class ‘B’ 72, 78 Polystoppers for Volumetric Flasks 66
Serological, Class ‘AS’ 78 Steristoppers 98-100
Serological, Class ‘AS’, Schellbach 78
Mohr, Class ‘B’ 79 TUBES
Mohr, Class ‘AS’ 79 Culture, Round Bottom 81
Volumetric, Class ‘AS’ 79, 80 Culture, Flat Bottom 82
Volumetric, Class ‘B’ 81 Centrifuge 82-83
NMR 33
PROTECTION PLATES Test Without Rim 83
Protection Plates, CERAN 71 Test With Rim 83

QUARTZ WARES WATCH GLASSES

Basin with Spout, Round Form 95 Watch Glass 85
Capsules, Circular 95
Triangles in Nickel Chrome Wire 96 VACUUM PUMPS
Crucibles without Lid, Low Form, 96 Oil Free, RIVOTEK 109, 177-178
Lid, Low Form 96
Crucibles without Lid Tall Form 97 VESSELS
Lid, Tall Form 97 Wide Mouth 84
Volatile Matter Crucibles with Lid 97 Spares 84
Muffle Tray, Rod Type 96
VIALS
REACTORS Vials for Pharmaceutical Industry 33
Stirred GL 45 41
Stirred GL 80 41
PP Cap, Cyan, YOUTILITY 28
Caps for Culture Tubes with Silicone Liner 82

201
 Regd. & Head Office
2116, Oberoi Garden Estates,
Chandivli Studio Road,
Chandivli, Andheri (East),
Mumbai 400 072.
Phone : 022 - 28475228, 28473297, 2847 0265
Telefax : +91-22-28474108
e-mail: [email protected],
[email protected]
Website: www.rivieraglass.co.in

Northern Regional Office

236 / 237, Vardhaman Diamond Plaza,
Desh Bandu Gupta Road, Opp. Paharganj
Police Station, New Delhi 110 055.
Phone : 011 - 23535474, 011 - 43650734
Telefax : 011 - 23523568
e-mail: [email protected]

Southern Regional Office :

TS-73, Thiru-Vi-Ka Industrial Estate,
Ekkaduthangal, Chennai 600 032.
Telefax : 044 - 22251185
e-mail: [email protected]

Eastern Regional Office

Shanti Niketan, 1st Floor,
RIVIERA 10, Iswar Chowdhury Road,
Kolkata 700 029.
GLASS Telefax : +91-33-24666462
PVT LTD e-mail: [email protected]

Customer servicing through

various Stock Depots and more
than 190 Authorised Dealers
strategically located in more
than 75 cities all over India