Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Temporary Co Rrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (First Revision)

    Uploaded by

    Svapnesh
    The document outlines requirements and testing methods for temporary corrosion preventive fluids used to protect metal surfaces during transport and storage. It defines two grades of preventive fluids and specifies their general requirements including being easily removable, forming a smooth film, and maintaining properties for 12 months of storage. The document establishes Indian standards for these types of preventive fluids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Temporary Co Rrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (First Revision)

    Uploaded by

    Svapnesh
    45 views1 page
    The document outlines requirements and testing methods for temporary corrosion preventive fluids used to protect metal surfaces during transport and storage. It defines two grades of preventive fluids and specifies their general requirements including being easily removable, forming a smooth film, and maintaining properties for 12 months of storage. The document establishes Indian standards for these types of preventive fluids.

    Original Title

    IS 1154_3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines requirements and testing methods for temporary corrosion preventive fluids used to protect metal surfaces during transport and storage. It defines two grades of preventive fluids and specifies their general requirements including being easily removable, forming a smooth film, and maintaining properties for 12 months of storage. The document establishes Indian standards for these types of preventive fluids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views1 page

    Temporary Co Rrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (First Revision)

    Uploaded by

    Svapnesh
    The document outlines requirements and testing methods for temporary corrosion preventive fluids used to protect metal surfaces during transport and storage. It defines two grades of preventive fluids and specifies their general requirements including being easily removable, forming a smooth film, and maintaining properties for 12 months of storage. The document establishes Indian standards for these types of preventive fluids.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    IS 1154 : 2000

    Zndian Standard
    TEMPORARY CO~RROSION PREVENTIVE FLUID,
    SOFT FILM, SOLVENT DEPOSITED, WATER
    DISPLACING - SPECIFICATION
    ( First Revision )
    1 SCOPE 3 GRADES

    This standard prescribes the requirements and the The temporary corrosion preventive fluid, soft film,
    methods of sampling and tests for temporary corrosion solvent deposited, water displacing shall be of two
    preventive fluid, soft film, solvent deposited, water grades:
    displacing suitable for the protection of metal surfaces a) Grade 1, and
    during transport and storage. b) Grade 2.

    2 NORMATIVE REFERENCES 4 DEFINITION


    The following Indian Standards contain provisions For the purpose of this standard, the temporary
    which, through reference in this text, constitute corrosion preventives are materials used for the
    provisions of this standard. At the time of publication protection of metallic surfaces during transportation
    the editions indicated were valid. All standards are and storage. These are applied to the metallic surfaces
    subject to revision, and parties to agreements based and function by forming protective barriers or other
    on the standard are encouraged to investigate the appropriate mode~of action at the metal surface. The
    possibility of applying the most recent editions of the corrosion preventives are readily removable by hot or
    standards indicated below: cold solvents, wiping, detergent solutions or stripping.
    IS No. Title NOTE-The term temporary signifies ready removability of the
    corrosion preventive and not the duration of its efficacy. The
    170 : 1986 Acetone (third revision) corrosion preventives should completely wet the metal surfaces and
    296 : 1986 Sodium carbonate anhydrous (third form smooth continuous film when applied by suitable methods.
    revision)
    5 REQUIREMENTS
    410 : 1977 Cold rolled brass sheet, strip and foil
    (third revision) 5.1 General Requirements
    513 : 1994 Cold rolled low carbon steel sheet
    The temporary corrosion preventives, soft film, solvent
    and strips (fourth revision)
    deposited shall be easily removable by applicable
    713 : 1981 Zinc base ingots for die casting
    means such as wiping, action of solvents or detergents
    (second revision)
    or manual stripping. This property shall be retained
    737 : 1986 Wrought aluminium and aluminium
    by the film after aging also.
    alloy sheet and strip for general
    engineering purposes (third revision) The temporary corrosion preventives, soft film, solvent
    1070 : 1992 Reagent grade water (third revision) deposited shall be smooth homogeneous materials
    1447 : 1966 Methods of sampling of petroleum consisting of film forming agents and other ingredients
    and its products dissolved or dispersed in media as applicable for the
    1448 Methods of test for petroleum and different grades. They shall be free from dirt and other
    its products: visible impurities and shall not contain any separated
    [P: 151 : 1976 Detection of copper corrosion from water.
    petroleum products by the copper
    5.2 Keeping Quality
    strip tarnish test (second revision)
    [P : 201 : 1982 Flash point by Abel apparatus (first When stored in the original sealed containers under
    revision) normal ambient conditions, the temporary corrosion
    [P : 211 : 1992 Flash point (closed) by Pensky preventives shall retain their properties and shall meet
    Martens apparatus (second revision) the requirements covered in this standard for the
    [P ; 251 : 1976 Determination of kinematic and corresponding grades for a period of at least 12 months
    dynamic viscosity (first revision) from the date of delivery.
    1839 : 1961 Toluene, reagent grade
    5.3 Specific Requirements
    4408 : 1979 Sodium chloride, analytical reagent
    (first revision) The temporary corrosion preventives shall comply with

    You might also like