CDP DSCET/AERO

Regulation: R2017
AE8603 COMPOSITE MATERIALS AND STRUCTURE LTPC 3 0 0
3

UNIT I MICROMECHANICS 10
Introduction - advantages and application of composite materials – types of reinforcements and
matrices - micro mechanics – mechanics of materials approach, elasticity approach- bounding
techniques – fiber volume ratio – mass fraction – density of composites. effect of voids in
composites.

UNIT II MACROMECHANICS 10
Generalized Hooke’s Law - elastic constants for anisotropic, orthotropic and isotropic materials -
macro mechanics – stress-strain relations with respect to natural axis, arbitrary axis –
determination of in plane strengths of a lamina - experimental characterization of lamina. failure
theories of a lamina. hygrothermal effects on lamina.

UNIT III LAMINATED PLATE THEORY 10

Governing differential equation for a laminate. stress – strain relations for a laminate. different
types of laminates. in plane and flexural constants of a laminate. hygrothermal stresses and
strains in a laminate. failure analysis of a laminate. impact resistance and interlaminar stresses.
netting analysis
UNIT IV FABRICATION PROCESS AND REPAIR METHODS 8
Various open and closed mould processes, manufacture of fibers, importance of repair and
different types of repair techniques in composites – autoclave and non-autoclave methods
UNIT V SANDWICH CONSTRUCTIONS 7
Basic design concepts of sandwich construction - materials used for sandwich construction
-,failure modes of sandwich panels - bending stress and shear flow in composite beams.

TOTAL: 45 PERIODS

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 1

 CDP DSCET/AERO

SUBJECT INCHARGE HOD/AERO

Course outcome:

Cours Course Outcomes

e Code On Successful completion of the course, Students will be able to,
C301.1 Gain knowledge on modern power system and its analysis.

C301.2 Represent the power system and formation of bus matrices.

C301.3 Analyze the power flow in the power system with the standard algorithms.

C301.4 Analyze the balanced faults.

C301.5 Analyze the unbalanced faults.

C301.6 Acquire knowledge to analyze stability of the system.

CO-PO Mapping:
COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2
CO1 2 3 2 3 - - - - - - - - 3

CO2 3 2 2 2 - - - - - - - 3 3

CO3 3 2 3 3 - 3 - - - - - - 3

CO4 2 3 3 2 - 3 - - - - - - 3

CO5 3 3 2 3 - - 2 - - - - 3 3

SUM 13 13 12 13 - 6 2 - - - - 6 15

AVG 2.6 2.6 2.4 2.6 - 3 2 - - - - 3 3

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 2

CDP DSCET/AERO

COURSE DELIVERY PLAN

Sub. Code : AE8603 Branch/Year/Sem:B.E. AERO/III/VI

Sub. Name : COMPOSITE MATERIALS Batch : 2018-2022
AND STRUCTURE Academic Year : 2020-2021(EVEN)
Staff Name : DURLAB DAS
OBJECTIVES:
To make the student understand the analysis of composite laminates under different
loading conditions and different environmental conditions.
TEXT BOOKS:

1. Autar K Kaw, ‘Mechanics of Composite Materials’, CRC Press, 2nd edition, 2005.
2. Isaac M. Daniel & Ori Ishai , "Mechanics of Composite Materials," OUP USA publishers,
2ndedition, 2005.
3. Madhujit Mukhopadhyay, Mechanics of Composite Materials and Structures, University
Press, 2004
REFERENCES:

1. Agarwal, B.D., and Broutman, L.J., "Analysis and Performance of Fibre Composites," John
Wiley & Sons, 3rd edition, July 2006.
2. Allen Baker, Composite Materials for Aircraft Structures, AIAA Series, 2ndEdition, 2004.
3. Calcote, L R. “The Analysis of laminated Composite Structures”, Von – Nostrand Reinhold
Company, New York 1998.
4. Lubing, Handbook on Advanced Plastics and Fibre Glass, Von Nostran Reinhold Co., New
York, 1989.
5. Michael F. Ashley, “Material Selection in Mechanical Design”, 5th edition, Butterworth-
Heiner, 2016.

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 3

 CDP DSCET/AERO

Teaching No. of Cumulative

Topic Books for
Topic Page No. methodolo periods No.of.Perio
No. Reference
gy Required ds

UNIT I (9)
MICROMECHANICS

1 Introduction T1 1 BB 1 1

2 Advantages and application T1 16 BB 3

2
of composite materials
3 Types of reinforcements and T1 BB 5
50 2
matrices
4 micro mechanics T1 203 BB 1 6

5 mechanics of materials T1 215 BB 8

approach, elasticity approach 2
6 bounding techniques T1 235 BB 2 10
7 fiber volume ratio T1 204 BB 1 11

8 mass fraction T1 205 BB 12

1
9 density of composites T1 207 BB 13
1
10 Effect of voids in composites T1 211 BB 14
1

LEARNING OUTCOME
At the end of unit, students should be able to
● Understanding the mechanics of composite materials
UNIT II MACROMECHANICS (9)
11 Generalized Hooke’s Law T1 BB 1 15
79
elastic constants for T1 81,82,84 4
12 anisotropic, orthotropic and ,88 BB 19
isotropic materials

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 4

 CDP DSCET/AERO

13 macro mechanics T1 61 BB 2 21

stress-strain relations with 325

14 T1 BB 1 22
respect to natural axis,
arbitrary axis
15 determination of in plane T1 BB 2 24
100
strengths of a lamina
16 experimental T1 BB 2 26
100
characterization of lamina
17 failure theories of a lamina 137 BB 27
T1 1
18 hygrothermal effects on 160 BB 29
T1 2
lamina
LEARNING OUTCOME
At the end of unit, students should be able to
● Ability to analyse the laminated composites for various loading eases

UNIT III (9)

LAMINATED PLATE THEORY
Governing differential T1 315 2
19 equation for a laminate. BB 31
stress
20 strain relations for a T1 BB 1 32
318
laminate
21 different types of laminates. T1 370 BB 2 34

22 in plane and flexural T1 340 BB 2 36

constants of a laminate
23 hygrothermal stresses and 350 BB 38
strains in a laminate T1 2
24 failure analysis of a laminate 370 BB 39
T1 1
25 impact resistance and 125 BB 42
interlaminar stresses T2 3
26 netting analysis 265 BB 44
T2 2

LEARNING OUTCOME
At the end of unit, students should be able to
● Knowledge gained in manufacture of composites
UNIT IV FABRICATION PROCESS AND REPAIR METHODS

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 5

 CDP DSCET/AERO

(9)

27 Various open and closed 143 BB 2 46

T2
mould processes
28 manufacture of fibers T2 BB 1 47
186
importance of repair and T2 BB
29 156 3 50
different types of repair
techniques in composites
30 autoclave and non-autoclave 184 BB 2 52
T2
methods

LEARNING OUTCOME
At the end of unit, students should be able to
● Should analyze sandwich and laminated plates

UNIT V SANDWICH CONSTRUCTIONS (9)

31 Basic design concepts of T1 419 BB 2 54

sandwich construction
32 materials used for T1 420 BB 2 56
sandwich construction
33 failure modes of sandwich T1 421 BB 2 58
panels
34 bending stress and shear T1 431 BB 3 60
flow in composite beams
LEARNING OUTCOME
At the end of unit, students should be able to
● Should be able to construct and analysis different composite technique
INTERNAL ASSESSMENT DETAILS
Assessment Number I II MODEL
Topic Nos. Unit1 -unit 2 Unit 3 – unit-4 All 5units
Date 19.03.2021 17.04.2021

ASSIGNMENT DETAILS
Assignment Number I II III

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 6

CDP DSCET/AERO

Topic Nos. bounding techniques

Dead Line 07.03.2021

Assignment
Descriptive Questions/Topic
number
Written assignment:
I mechanics of materials approach, elasticity approach
Written assignment:
II
stress-strain relations with respect to natural axis, arbitrary axis
Written assignment:
III

Prepared By Verified By Approved By

(DURLAB DAS) HOD/AERO PRINCIPAL

AE 8603 COMPOSITE MATERIALS AND STRUCTURES Page 7