REPORT

3933 US ROUTE 11 CORTLAND, NEW YORK 13045

Order No. G100766457 Revision Date: October 31, 2012

Original Issue Date: June 30, 2012

REPORT NO. 100766457CRT-001

TEST OF SAFETY GLASSES

MODELS
SPY CLEAR SPY GREY

RENDERED TO

VICSA SAFETY SA
PINTOR CICARELLI 683
8950002 SAN JOAQUIN, CHILE

REVISION NOTE: Changed NEAR UV from scientific notation to standard notation and two decimal
places.

DATA REQUESTED

The client requested optical testing to Section 5 of ANSI Z87.1.

AUTHORIZATION

This test service was authorized by signed quote number 500380131.

REFERENCE DOCUMENTS: The following Test Standards were used in part or in total to test
each sample:

ANSI Z87.1 2010 American National Standard for Occupational and Educational
Personal Eye and Face Protection Devices
ASTM D1003 2007 Standard Test Method for Haze and Luminous Transmittance of
Transparent Plastics

DEVICES SUBMITTED

The samples were received by Intertek on June 21, 2012 in undamaged condition, and were tested as
received. The sample designations were 250592-01 through 250592-02.

DATES OF TESTS

June 28, 2012 through June 29, 2012

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited
to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or
damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its
marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are
relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
Measurement uncertainty budgets have been determined for applicable test methods and are available upon request.
EQUIPMENT LIST
Control Calibration Calibration
Equipment Used Model Number Number Date Due Date
Optronics Spectroradiometer OL750D E288 06/28/12 06/30/12
Gardner Hazemeter XL211 N328 06/28/12 07/28/12
Extech Hygrothermometer 445703 T1357 10/26/11 10/26/12
Extech Hygrothermometer 445703 T1355 10/29/11 10/29/12
Intertek 100ft Goniometer NA N060 08/12/11 08/12/12

TESTS

Section 5.1.1 Optical Quality:

Lenses shall be free of striae, bubbles, waves and other visible defects which would impair their optical
quality.

Section 5.1.2 Luminous Transmission:

Clear lenses shall have a luminous transmission of not less than 85%. Clear and Filter lenses shall be
labeled in accordance with Table 4a of ANSI Z87.1. Plano and prescription lenses shall comply with
Tables 6 – 10 of ANSI Z87.1 where applicable.

Section 5.1.3 Haze:

Clear and plano lenses shall not exhibit more than 3% haze.

Section 5.1.4 Refractive Power, Astigmatism, Resolving Power, Prism and Prism Imbalance:

Lenses shall meet the tolerances for Refractive Power, Astigmatism and Resolving power as specified in
Table 1 of ANSI Z87.1. Lenses shall meet the tolerances for Prism and Prism Imbalance as specified in
Table 2 of ANSI Z87.1.

Table 1: Tolerance on Refractive Power, Astigmatism and Resolving Power

Protector Refractive Power Astigmatism Resolving Power
Spectacle ± 0.06 D ≤ 0.06 D Pattern 20
Goggle ± 0.06 D ≤ 0.06 D Pattern 20
Faceshield Windows No Requirement No Requirement Pattern 20
Welding Helmet Lenses ± 0.06 D ≤ 0.06 D Pattern 20

Table 2: Tolerance on Prism and Prism Imbalance

Vertical Base Out
Protector Prism Base In Imbalance
Imbalance Imbalance
Spectacle ≤ 0.50 ∆ ≤ 0.25 ∆ ≤ 0.25 ∆ ≤ 0.50 ∆
Goggle ≤ 0.25 ∆ ≤ 0.125 ∆ ≤ 0.125 ∆ ≤ 0.50 ∆
Faceshields ≤ 0.37 ∆ ≤ 0.37 ∆ ≤ 0.125 ∆ ≤ 0.75 ∆
Welding Lenses ≤ 0.50 ∆ ≤ 0.25 ∆ ≤ 0.25 ∆ ≤ 0.75 ∆

Report No. 100766457CRT-001 page 2 of 4 Revision Date: October 31, 2012

Original Issue Date: June 30, 2012
RESULTS OF TEST

Section 5.1.1 Optical Quality:

Control Number Model Number Defects Notes Pass/Fail
250592 Clear None --- Pass
250592 Grey None --- Pass

Section 5.1.2 Luminous Transmission:

Percent Transmittance
Control Number Model Number Left Eye Right Eye Pass/Fail/NA
250592 Clear 91.6 91.6 Pass
250592 Grey 9.93 10.5 NA

Section 5.1.3 Haze:

Percent Haze
Control Number Model Number Left Eye Right Eye Pass/Fail/NA
250592 Clear 0.68 0.68 Pass
250592 Grey 0.52 0.40 Pass

Section 5.1.4 Refractive Power, Astigmatism, Resolving Power

Control Refractive Power Astigmatism Resolving
Number Model Number Eye (diopeters) (diopeters) Power Pass/Fail
Left 0.03 0.04 48
250592 Clear Pass
Right 0.03 0.04 48

Left 0.03 0.05 48

250592 Grey Pass
Right 0.02 0.05 48

Section 5.1.4 Prism and Prism Imbalance

Vertical Base in Base Out
Control Model Prism Imbalance Imbalance Imbalance
Number Number Eye (∆) (∆) (∆) (∆) Pass/Fail
Left 0.18
250592 Clear 0.06 0.00 0.00 Pass
Right 0.23

Left 0.18
250592 Grey 0.00 --- 0.06 Pass
Right 0.14

Transmittance Ratings
Visible Light
UV Transmittance (%)
Control Model Transmittance
Number Number Eye (%) L-Scale Far UV Near UV U-Scale
Left 91.6
250592 Clear Clear 0.00 0.00 U6
Right 91.6

Left 9.93
250592 Grey L3 0.00 0.00 U6
Right 10.5

Report No. 100766457CRT-001 page 3 of 4 Revision Date: October 31, 2012

Original Issue Date: June 30, 2012
PHOTO OF SAMPLE(S):

SPY CLEAR

SPY GREY

In Charge Of Tests: Report Reviewed By:

Denis Niggli David Ellis

Engineer Senior Project Engineer
Lighting Division Lighting Division

Attachment: None

Report No. 100766457CRT-001 page 4 of 4 Revision Date: October 31, 2012

Original Issue Date: June 30, 2012