Unit No.

and
Question statement Marks
Title
Unit – I Remembering
Basics of 1. Define real fluid. 2
Fluid Power 2. Define newtonian fluid. 2
3. Define non-Newtonian fluid. 2
4. Define density or mass density. 2
5. Define specific weight or weight density. 2
6. Define specific volume. 2
7. Define specific gravity or relative density. 2
8. Define dynamic or absolute viscosity. 2
9. Define kinematic viscosity. 2
10. List the real fluid. 2
11. Define ideal fluid.
12. State pascal’s law. 2
Understanding
13. Explain the steady and unsteady flow. 2
14. Explain the uniform and non-uniform flow. 2
15. Explain the laminar and turbulent flow. 2
16. Explain the compressible flow and incompressible flow. 2
17. Explain the rotational and irrotational flow. 2
18. Explain the basic elements in a fluid power system. 4
19. Describe hydraulic system with the following criteria i) Energy
carrier ii) energy conversion iii) energy control iv) re-conversion of 4
energy.
20. Classify types of fluid. 2
21. Classify the fluid flow. 2
22. Describe a pneumatic system with the following criteria i) Energy
carrier ii) energy conversion iii) energy control iv) re-conversion of 4
energy.
23. Describe electric system with the following criteria i) Energy carrier
ii) energy conversion iii) energy control iv) re-conversion of energy.
4
24. Describe mechanical system with following criteria i) Energy carrier
ii) energy conversion iii) energy control iv) re-conversion of energy.
4
Application
25. Explain pascal’s law with any one application. 4
4
26. Explain the continuity equation with any one application.

27. Explain Bernoulli’s theorem with any one application. 4

1
Unit No. and
Question statement Marks
Title
30. Calculate specific volume if the mass of fluid is 8000kg and the
volume of fluid is 8 m3.
4
Unit – II Remembering
Oil Hydraulic 1. List the different types of pumps. 2
System and 2. State the function of the pump. 2
its 3. State the function of the actuator. 2
components 4. State the function of the intensifier. 2
5. List the different types of linear actuators. 2
6. State 3/2 direction control valve. 2
7. State the function of a pressure relief valve. 2
8. List the different types of rotary actuators. 2
9. Classify of pumps. 2
10. Describe a double-acting cylinder. 2
Understanding
11. Describe a telescopic-type cylinder with a neat sketch. 4
12. Discuss the 4/2 direction control valve. 4
13. Describe an unbalanced vane pump with a neat sketch. 4
14. Describe a directly operated pressure relief valve with a neat sketch. 4
15. Differentiate gear, vane, piston pump with the following criteria
i) Pressure ii) flow rate
4
16. Classify control valves. 4
17. Explain the 4/3 direction control valve. 4
18. Explain the internal gear type pump with a neat sketch. 4
19. Explain with a neat sketch of the pressure-temperature compensated
flow control valve.
6
20. Explain with a neat sketch of a semi-rotary actuator. 4
Application
21. Explain the external gear type pump with a neat sketch. 4
22. Explain the general layout of the oil hydraulic system. 4
23. Explain the radial piston pump. 6
24. Differentiate between seat type and spool type direction control
valve.
4
25. Explain the variable displacement type vane pump with a neat
sketch.
6
Unit – III Remembering
Oil Hydraulic 1. List the application of the meter-in circuit. 2
Circuit 2. List the application of the meter-out circuit. 2
3. List the application of the bleed-off circuit. 2
4. List any two applications of the sequencing circuit. 2
5. Describe the difference between single and double-acting cylinders. 4
6. Describe the actuating of the single-acting cylinder. 2

2
Unit No. and
Question statement Marks
Title
7. List the types of sequencing circuits. 2
8. List the types of speed control circuits. 2
9. List the advantages of the meter-in circuit. 2
10. List the advantages of the meter-out circuit. 2
Understanding
11. State the function of the impulse valve. 2
12. Explain the actuating of the double-acting cylinder. 4
13. Explain the actuating of the bi-directional hydraulic motor. 4
14. Describe the actuating of the uni-directional hydraulic motor. 2
15. Show the circuit diagram for speed controlling the backward
direction of the double-acting cylinder.
4
16. Explain the actuation of the bi-directional hydraulic motor with a 4/3
direction control valve.
4
17. Describe any one of the sequencing circuits for simple operation. 4
18. Identify the common faults in the oil hydraulic system. 4
19. Explain the causes and remedies in the oil hydraulic system. 4
20. Explain the actuation of the double-acting cylinder with a 4/3
direction control valve.
4
Application
21. Differentiate between meter-in and meter-out of the hydraulic
circuit.
4
22. Calculate piston side area when piston diameter is 55cm2 and piston
rod diameter is 25cm2.
4
23. Construct the sequencing circuit by using one double-acting cylinder
another single-acting.
6
24. Construct the circuit diagram using a 3/2 direction control valve and
single-acting cylinder with the normal and actuated position.
4
25. Explain the impulse-operated hydraulic circuits. 4
Unit – IV Remembering
Pneumatic 1. State the function of the FRL unit. 2
System and 2. Show the symbol of the FRL unit. 2
its 3. Show the symbol of a 3/2 direction control valve. 2
components 4. Show the symbol of a 5/2 direction control valve. 2
5. Show the symbol of compressors. 2
6. State the function of compressors. 2
7. State the function of the separator and show its symbol. 2
8. Show the symbol of the pressure relief valve. 2
9. State the function of the cooler and show its symbol. 2
10. Describe the air-operated double-acting cylinder with a neat sketch. 4
Understanding
11. Explain the general layout of the pneumatic system. 4
12. Classify the compressors. 2

3
Unit No. and
Question statement Marks
Title
13. Explain the single-stage reciprocating air compressors. 4
14. Explain the working of two-stage reciprocating compressors. 4
15. Describe the construction and working of the double-acting
pneumatic cylinder
4
16. Explain the tandem cylinder in a pneumatic system. 4
17. Show the flow control valve with the check valve. 2
18. Describe a pilot-operated pressure relief valve with a neat sketch. 4
19. List any four applications of compressors. 2
20. Explain the shuttle valve with the circuit diagram. 4
Application
21. Explain the time delay valve with the circuit diagram. 4
22. Explain the twin pressure valve with a circuit diagram. 6
23. Explain the air operated pressure reducing valve. 4
24. Explain the air-operated vane motor with a neat sketch. 6
25. Compare reciprocating and rotary compressors. 4
Unit – V Remembering
Pneumatic 1. Define sequencing operation. 2
Circuit 2. Show the symbol of the single-acting cylinder. 2
3. Show the symbol of the double-acting cylinder with double piston
rod
4
4. Show the symbol of air operated bi-directional motor. 2
5. Show the symbol of air operated uni-directional motor. 2
6. State the function of actuators. 2
7. State the different logic gates used in a pneumatic system. 2
8. List any two methods of the speed control circuit. 2
9. Show the symbol of roller operated direction control valve. 2
10. Show the symbol of the double-acting cylinder with a double piston
rod.
2
11. Show the symbol of the air motor. 2
12. Show the symbol of the single-acting cylinder with spring return. 2
Understanding
13. Explain the pneumatic circuit for the actuation of the single-acting
cylinder.
4
14. Explain the pneumatic circuit for the actuation of the double-acting
cylinder.
4
15. Explain the pneumatic circuit for the actuation of a uni-directional
motor.
4
16. Explain the pneumatic circuit for the actuation of a bi-directional
motor.
4
17. Construct the sequencing circuit by using an air-operated cylinder. 4
18. Show the symbol of a time delay valve. 2
19. Identify common faults in a pneumatic system. 4

4
Unit No. and
Question statement Marks
Title
20. Describe the speed control circuit of an air-operated single-acting
cylinder by using a 3/2 direction control valve.
4
21. labeled sketch of air lubricator. 4
22. Explain the pneumatic circuit for speed control of a double-acting
cylinder.
4
23. Explain the pneumatic circuit for speed control of a single-acting
cylinder.
4
24. Name any four components of the pneumatic system. What are the
factors considered while selecting them?
4
Application
25. Explain the air-operated impulse circuit. 6
26. Explain the causes and remedies in a pneumatic system. 6
27. Explain the speed control circuit of the air-operated double-acting
cylinder.
4
28. Explain the 5-way-3 position direction control valve used in a
pneumatic system.
6
29. Explain with a neat sketch (position-based) working of sequencing
circuit for two double-acting Air cylinders.
6
30. Explain with a neat sketch (position-based) working of sequencing
circuit for two bi-directional air motor.
6
Unit – VI Remembering
Electro 1. State the function of the proportional control valve. 2
hydraulic 2. Show the 4/3 solenoid operated direction control valve. 2
and 3. Show the 5/2 solenoid operated direction control valve. 2
pneumatic 4. State any two applications of 3 × 2 DC valves. 2
systems 5. List any four-component used in an electro-pneumatic system. 2
6. List any four-component used in an electro-hydraulic system. 2
7. Show the symbol of the 2/2 direction control valve with roller
operated.
2
8. Show the symbol of the sequence control valve. 2
9. Show the symbol of the pressure compensated flow control valve. 2
10. Show the symbol of the temperature-pressure compensated flow
control valve.
2
Understanding
11. Identify components of an electro-hydraulic system. 4
12. Identify components of an electro-pneumatic system. 4
13. Define coanda effect. 2
14. Construct an electro-pneumatic circuit with an electric time delay
valve.
4
15. Construct an electro-hydraulic circuit with an electric time delay
valve.
4
16. Construct simple electro-hydraulic circuits. 4
17. Explain any three types of special cylinder used in electro-
hydraulics with a neat sketch
4

5
Unit No. and
Question statement Marks
Title
18. Construct simple electro-pneumatic circuits. 4
19. Explain a neat sketch of the Quick Exhaust 4
20. Develop a circuit diagram to perform a drilling operation. 4
Application
21. Construct an electro-hydraulic circuit of a double-acting cylinder
with a 4/2 solenoid-operated spring return valve.
6
22. Construct an electro-pneumatic circuit of a single-acting cylinder
with a 3/2 solenoid-operated spring return valve.
6
23. Discuss the construction and operation of different types of fluid
sensors
4
24. Construct the pneumatic circuit for Pick and Place applications. 6
25. Construct the hydraulic circuit for the surface grinding machine. 6