Avaya Call Reporting 4.

2 Installation Guide
Table of Contents
5 1.0 Avaya Call Reporting Specifications
7 2.0 IP Office Configuration
7 Enable Devlink3
7 Administer Group Rights in Devlink 3
7 Administer Service Users
7 IP Office System Settings
7 Voicemail Pro Settings

8 3.0 Avaya Call Reporting Installation

8 Avaya Call Recording

9 4.0 Assigning Licenses

9 Assigning IP Office Connections
9 Assigning Licenses

11 5.0 Recording Library Installation for Active Recording

11 Recording Library Installation
11 Active Recording Configuration
12 Recording Rules
12 Multi-Site Avaya Call Reporting with Active Recording

13 6.0 Recording Library Installation for Voicemail Pro on Windows

13 Recording Library Installation
13 Active Recording Configuration
14 IP Office Configuration

15 7.0 Recording Library Installation for Voicemail Pro on Linux

15 Recording Library Installation
15 Active Recording Configuration
16 IP Office Configuration
17 Voicemail Pro FTP Configuration

18 8.0 Accessing HTML Avaya Call Reporting and Avaya Contact

Center Agent (CCAC)
18 Accessing HTML version of Avaya Call Reporting through a web browser
18 Accessing Avaya Call Reporting Contact Center Agent Client

Last Updated: 9/25/2019 AVAYA 4

1.0 Avaya Call Reporting Specs

FORMAT Downloadable setup file

DATABASE BlueDB (Open Source)

WEB SERVER Apache Tomcat

USER INTERFACE Web Interface and Avaya Call Reporting Desktop Application

AVAYA IP OFFICE Release 10.1 and above

IP OFFICE CONNECTION 10.1 and above Devlink3.

AVAYA LICENSES REQUIRED IP Office 10.1 +

VIRTUAL MACHINE VM Ware and Hyper-V

USER PC REQUIREMENTS Windows 7 or higher; 32/64-bit Linux

Internet Explorer
Java 7 or above
Javascript enabled

SERVER REQUIREMENTS Windows 8.1, 10, 2012, 2012 r2, 2016, or 2019.
ESXi 5.5, 6.0, 6.5, or 6.7.
Linux (Ubuntu and CentOS recommended and tested)
64-bit recommended

INSTALLATION LOCATION Avaya Call Reporting cannot be installed on the same

PC/Server as IP Office Server Edition or the Application
Server.

REPORTING The following chart details the necessary system requirements

based upon the number of users in your phone system. This
chart is for those who have Standard Reports only.

Users CPUs System Mem. Java Heap Disk Calls Per Year

25 Single Core* 512 MB 128 MB 543.3 MB/yr 820,000

50 Single Core* 512 MB 128 MB 885 MB/yr 1,600,000
100 Single Core* 512 MB 128 MB 1.7 GB/yr 3,200,000
250 25 Agents
Single Core* 512 MB 128 MB 4.2 GB/yr 8,200,000
500 Dual Core 1 GB 256 MB 8.2 GB/yr 16,400,000
1000 Dual Core 1 GB 384 MB 16.2 GB/yr 32,860,000
3000 Dual Core 2 GB 896 MB 47 GB/yr 98,500,000

AVAYA 5
RECORDING STORAGE The following chart details the number of days until the disk
drive is filled up from recording. Use this information to
determine your company’s needs. Assume eight hours per
recording port, per day

Users 1 Agent 5 Agents 10 Agents 25 Agents 50 Agents

32 GB 700 140 70 28 14
250 GB 5,461 1,092 546 218 109
500 GB 10,922 2,185 1,092 437 218
1000 GB 21,845 4,370 2,185 875 437

MAXIMUM RECORDING
Platform Active Recording VM Pro VRTX
PORT CAPACITY
IP Office Server Edition running on Dell R230 80 150 256
IP Office Server Edition running on Dell R360 80 150 512
IP Office Server Edition running on ACP110 (Dell R640) 80 150 512
IP Office Server Edition OVA 80 150 512
Select Dell 630 160 500 1024
Select OVA 160 500 1024
IP500 V2 40 40 184

RECORDING PORT SERVER The chart below refers to the required specifications needed
REQUIREMENTS depending on the user’s amount of Recording Ports.

10 Recording Ports 11-23 Recording Ports 25 Recording Ports 46 Recording Ports 69 Recording Ports

Single Avaya Call

Reporting PC 1 PC for Avaya
CPU & Standard Avaya Single Avaya Call PC w/ min specs &
6 GB RAM Call Reporting
Call Reporting Reporting PC PC w/ 8 GB RAM
RAM Server Specs 6 GB RAM 8-Core Processor 1 PC w/ 6 GB RAM
4-Core Processor 8-Core Processor
or 1 PC for ACR
& 1 PC for Recording

8-Hour Days 5 Agents 10 Agents 25 Agents

50 Agents

500 GB
250 GB
1000 GB

AVAYA 6
2.0. IP Office Configuration
Prior to installing and configuring the Avaya Call Reporting software, the IP Office configuration
settings will need to be changed in order for Avaya Call Reporting to perform at its highest level.

2.1. Enable Devlink3

The Devlink3 protocol is available for TCP or TLS. The IP Office Ports for TCP is 50797 and for TLS is 50796.
1. From the IP Office Configuration tree in the left pane select File -> Advanced -> Security Settings.
2. Select System -> the Unsecured Interfaces tab and check the TAPI/Devlink 3 box.

2.2. Administer Group Rights in Devlink 3

1. From the IP Office Security Administration menu select Right Groups.
2. Create a new Rights Group and enter a descriptive name In the New Rights Group Details Window. For
example, Devlink3.
3. Go to the Rights Groups menu and select the Group created in step 2.
4. Open the Telephony API’s tab in the right window.
5. Check the DevLink3 option and press OK.

2.3. Administer Service Users

1. From the IP Office Security Administration menu select Service Users.
2. Create a new Service User and enter the desired name and password in the New Service User
Details window.
3. Go to the Service User menu and select the new User Name created in step 2.
4. Select the Rights Group Membership in the bottom right pane and check the newly added
rights groups.
5. Press OK.

2.4. IP Office System Settings

1. Go to IP Office Manager -> System -> Telephony and ensure Show Account Code is checked.
a. For each Group do the following:
I. Ensure the Group isn’t excluded from directory (uncheck Exclude From Directory)
II. Set each group to Longest Waiting, Sequential, or Rotary for accurate reporting.
III. If Queuing is enabled under the Queuing tab, then set the queue type to Assign Call on Agent Alert
b. In User Settings do the following:
I. Ensure the User isn’t excluded from the directory (uncheck Exclude From Directory)
II. Go to the Telephony -> Supervisor Settings tab and check Force Login

2.5. Voicemail Pro Settings

For each Transfer action, ensure that the “Source of transfer (displayed on phone)” field under the Specific
tab is blank.

AVAYA 7
 3.0. Avaya Call Reporting Standard Installation
Avaya Call Reporting is a call reporting software that offers a revolutionary set of features designed to
overcome the limitations of traditional call history and reporting software. With a thin-client web
interface, Avaya Call Reporting provides detailed and accurate information by connecting directly to
your phone system.

Follow the steps through this installation guide in order to setup, install, and configure Avaya Call
Repording and Recording Library.

3.1. Avaya Call Reporting

INSTALLATION

1. Run the Setup file as an Administrator

2. Select the location where you would like the Avaya Call Reporting setup files to be extracted. C: is
default, but you may extract to the location of your choice.
3. Read the End-User Agreement. Select "I accept the agreement" if you agree.
4. Select the location where you would like Avaya Call Reporting to be installed. C: is default, but you
may install it on the drive of your choice.
5. Input the serial key that was provided to you by Avaya.
6. The Apache Tomcat Port information will automatically populate. It is recommended to leave the
port as the default value but you may change this port if needed.
7. Select install.

SETUP
1. Once the install is finished, open Internet Explorer and enter the given web address.*
2. Use the default Username and Password to login. This should be “Administrator” and “password”,
both are case sensitive. You will be prompted to change the password once you log in.

*Internet Explorer is currently the only web browser that supports the required Java Plugin.

AVAYA 8
 4.0. Assigning Licenses
When you first login to Avaya Call Reporting after installation, it will ask you to add IP Office
Connections and assign licenses.

4.1. Assigning IP Office Connections

The first window that you see after you login into Avaya Call Reporting will provide the oppor-
tunity to add your IP Office Connections. To add IP Office connections do the following:
1. Select the “Add” in the bottom right hand corner.
2. API: Select Devlink 3 (Recommended)
3. Site Name: The default site name will be IP Office. Change this if desired (recommended if you
are on a SCN or Server Edition).
4. IP Address of IP Office: Put in the proper IP Address for your IP Office connection.
5. DevLink3 Use TLS: Set to “True” if using TLS.
6. DevLink3 Username: Enter the correct username to your DevLink3.
7. DevLink3 Password: Enter the correct password to your DevLink3.
8. External Trunks: Leave default.
9. Hit “OK”.
10. If you are on an SCN or Server Edition, you can add each additional site by repeating steps 1-9.
11. Once you are finished adding the IP Office connections click “Next”.

4.2. Assigning Licenses

After the IP Office connections are configured, you will now be able to assign Avaya Call Reporting licenses.
Dependent on the licenses you have purchased, you will be prompted to configure additional settings and can
assign user licenses to the desired users. The following windows that are presented will coincide with the
modules that you have purchased:

DEFAULT USER
You will be prompted to update the password for the Administrator account.

LICENSED USERS
The base licenses are static, per-user licenses. They are assigned to a specific user and cannot be shared. This
is necessary for basic reporting and other software functionality.* The base licenses can be transferred to
other users as needed. To assign base licenses do the following:
1. Select the desired agents to monitor in Avaya Call Reporting.
2. Hit Finish.

RECORDING RETENTION POLICY

A Recording Retention Policy should be created if desired. Fill out the options as needed. If a Recording
Retention Policy is not needed, uncheck the option to “Delete old recordings to make room for new record-
ings” and click Finish.

*Deselected users will appear as Unlicensed in Avaya Call Reporting in Cradle to Grave. Meaning, their calls will still show in
Cradle to Grave, but in place of an “Agent Name” it will be “Unlicensed”. AVAYA 9
SCHEDULED BACKUPS
A Scheduled Backup should be created. Choose the frequency, add a backup path, and limit the total backups
retained as you desire. Once completed, press Finish.

AGENT REALTIME
Agent Realtime licenses are static, per-user licenses. They are assigned to a specific user and cannot be
shared. The Realtime Agent license can be transferred to another user as needed. To assign Realtime Licenses
do the following:
1. Select the desired agent(s) to monitor in Realtime
2. Hit Finish.

AGENT DASHBOARD
Agent Dashboard licenses are concurrent licenses, meaning that they can be shared as long as two users are
not utilizing it simultaneously. The licenses can be prioritized, listing agents based on high/low priority.
1. In the left-hand column, select the desired user and select the center arrow pointing to the right.
2. Repeat with each desired user.
3. Users will be prioritized from top to bottom. To prioritize the users, use the “Up” and “Down”
buttons on the right to change a user’s position.
4. Hit Finish

AVAYA 10
5.0. Recording Library Installation
for Active Recording
When installing Recording Library there are two standard choices: Devlink Active Recording and Voicemail
Pro. Follow the steps under the specific section that matches your needs. This section covers the steps to
install and configure Active Recording. Note that Active Recording requires Avaya Call Reporting Recording
Library licenses. Active Recording will attempt to record on all of your IP Office connections.

5.1. Recording Library Installation

1. Run the Avaya Call Reporting Apps Setup as an Administrator
2. Select the location where you would like the Avaya Call Reporting setup files to be extracted. C: is
default, but you may extract to the location of your choice.
3. Read the End-User Agreement. Select "I accept the agreement" if you agree.
4. Click Show Advanced and check Recording Library
5. Enter the URL to your Avaya Call Reporting software. For example, if you installed Avaya Call Reporting
on a server with IP Address 10.20.30.40, then enter http://10.20.30.40:9080. Do not use localhost:9080
or 127.0.0.1:9080 if you are installing the Recording Library on the same server as Avaya Call Reporting.
The exact IP Address and port must be specified.
6. Leave the default Recording System ID and press next.
7. Press Install.

5.2. Active Recording Configuration

1. Open Avaya Call Reporting once you have installed Recording
Library.
2. Go to System Settings > Recording Libraries.
3. Click on the ellipsis next to “Recording Libraries.”
4. Select Devlink Recording - Recording Library 1.
a. If no recording library exists, click “Add.”
b. Click on the drop-down and select “DevLink Active
Recording.”
5. Review the following settings.
a. Recording Library IP Address: Enter the IP Address of the
server that the Recording Library is installed on.
b. Recording Library Public IP Address:
I. If using On Premise Avaya Call Reporting, leave blank
II. If using Powered by Avaya, and Recording Library is
on a separate server from Avaya Call Reporting,
the Recording Library will require a public IP. Please
enter the public IP address for the Recording Library
server.
c. IP Office Private IP Address:
I. If using On Premise Avaya Call Reporting, leave blank
II. If using Powered by Avaya, and Recording Library is on a separate server from Avaya Call Reporting,
the Recording Library will require a private IP. Please enter the private IP address for the Recording
Library server.
d. Recording Storage Locations: Configure where the recordings will be stored. The default will be the
recording library directory where the Recording Library was installed. You will also be able to manage
your retention policies here.
6. Press OK and Save.

AVAYA 11
5.3 Recording Rules
1. Go to System Settings > Recording Libraries.
2. Click on the ellipsis next to “Recording Rules”.
3. Click Add.
4. Select the Recording Rule Template that is desired and enter the desired settings.The most common
Recording Rule Template is Agent. For example:
a. Select the Agents you wish to record.
b. Choose the percentage of calls you wish to record.
c. Give the Recording Rule a title.
5. Press OK and Save.

5.4. Multi-Site Avaya Call Reporting with Active Recording

Active Recording will attempt to record on all of your IP
Office connections. Only one Recording Library can be
configured for Active Recording.

To record calls, Active Recording needs the Avaya Call

Reporting Server to be on the same LAN as any IP Offices;
however, LAN IP addresses can be configured for each IP
Office. After running an update, we will migrate the old
private IP setting from Recording Library to the first IP
Office connection. This will make it so recordings will still
work, even though the “IP Office Private IP” setting is now
hidden and has been moved to each IP Office connection.

The “Use IP Office LAN IP Address” setting allows you to choose which IP address to use for recordings.
This applies to all the IP Office connections.

AVAYA 12
6.0. Recording Library Installation
for Voicemail Pro on Windows
When installing Recording Library there are two standard choices: Devlink Active Recording and Voicemail
Pro. Follow the steps under the specific section that matches your needs. This section covers the steps to
install and configure Recording Library for Voicemail Pro when the Voicemail Pro is installed on a Windows
server. You will be installing Recording Library on the same server as the Voicemail Pro. Note that Call
Recording with Voicemail Pro requires Avaya Voicemail Pro software licenses and Avaya Call Reporting
Recording Library licenses.

6.1. Recording Library Installation

1. Download the Avaya Call Reporting Apps Setup onto the Windows server that hosts the Voicemail Pro
service.
2. Run the Avaya Call Reporting Apps Setup as an Administrator.
3. Select the location where you would like the Avaya Call Reporting setup files to be extracted. C: is
default, but you may extract to the location of your choice.
4. Read the End-User Agreement. Select "I accept the agreement" if you agree.
5. Click Show Advanced and check Recording Library.
6. Enter the URL to your Avaya Call Reporting software. For example, if you installed Avaya Call Reporting
on a server with IP Address 10.20.30.40, then enter http://10.20.30.40:9080. Do not use localhost:9080
or 127.0.0.1:9080 if you are installing the Recording Library on the same server as Avaya Call Reporting.
The exact IP Address and port must be specified.
7. Leave the default Recording System ID and press next.
8. Press Install.

6.2. Recording Library Configuration

1. Open Avaya Call Reporting once you have installed
Recording Library.
2. Go to System Settings > Recording Libraries.
3. Click on the ellipsis next to “Recording Libraries”.
4. Select VMPro - Recording Library 1.
a. If no recording library exists, click “Add”.
b. Click on the drop-down and select “VM Pro”.
5. Review the following settings.
a. Recording Library IP Address: Enter the IP Address of
the server that the Recording Library is installed on.
b. Server Address: Enter the IP Address of the server that
the Avaya Call Reporting is installed on.
c. Monitored Recording Directory: Enter the path to the
Avaya VRL directory. This is commonly “C:\Program
Files (x86)\Avaya\IP Office\Voicemail Pro\VM”.
d. Recording Storage Locations: Configure where the
recordings will be stored. The default will be the
recording library directory where the Recording
Library was installed. You will also be able to manage
your retention policies here.
6. Press OK and Save.

AVAYA 13
6.3. IP Office Configuration
Decide how you’d like to recordings to be created, either at the User, Group, Incoming Call Route, or Account
Code. The most common configuration uses User-Level.

USER-LEVEL CALL RECORDING

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "User" from the middle bar.
3. Select a user whose calls you would like to record.
4. In the individual user's window, select the "Voice Recording" tab.
5. Select the percentage of outbound and inbound calls to record in the Recording Outbound and
Recording Inbound fields. Select "On" to record all calls. You may also change the External field to
External & Internal if you wish to record internal agent calls as well.
6. Select Voice Recording Library in the Destination field for both the Recording (Auto) and
Recording (Manual) menus.
7. Press OK -> Save -> and Merge

GROUP LEVEL
1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Group" from the left sidebar.
3. Select a group whose calls you would like to record.
4. In the specific group’s menu, on the far right, select the "Voice Recording" tab.
5. Select the percentage of inbound calls to record in the Recording Inbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. If you wish to record internal group calls as well, set Auto Record Calls to External & Internal.
8. Press OK -> Save -> Merge

INCOMING CALL LEVEL

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Incoming Call Route" from the left sidebar.
3. Select an incoming call route you would like to record.
4. In the call route menu, navigate to the "Voice Recording" tab.
5. Select the percentage of inbound calls to record in the Recording Inbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. Press OK -> Save -> Merge

ACCOUNT CODE LEVEL

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Account Code" from the left sidebar.
3. Select an account code whose associated calls you would like to record.
4. In the account code window, navigate to the "Voice Recording" tab.
5. Select the percentage of outbound calls to record in the Record Outbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. Press OK -> Save -> Merge

AVAYA 14
7.0. Recording Library Installation
for Voicemail Pro on Linux
When installing Recording Library there are two standard choices: Devlink Active Recording and Voicemail
Pro. Follow the steps under the specific section that matches your needs. This section covers the steps to
install and configure Recording Library for Voicemail Pro when the Voicemail Pro is installed on a Linux
server. You will be installing Recording Library on a Windows server and then utilizing the Voicemail Pro’s
built in FTP service to retrieve the recordings. Note that Call Recording with Voicemail Pro requires Avaya
Voicemail Pro software licenses and Avaya Call Reporting Recording Library licenses.

7.1. Recording Library Installation

1. Download the Avaya Call Reporting Apps Setup onto a Windows server that shares the same local
network as the Voicemail Pro server.
2. Run the Avaya Call Reporting Apps Setup as an Administrator.
3. Select the location where you would like the Avaya Call Reporting setup files to be extracted. C: is
default, but you may extract to the location of your choice.
4. Read the End-User Agreement. Select "I accept the agreement" if you agree.
5. Click Show Advanced and check Recording Library.
6. Enter the URL to your Avaya Call Reporting software. For example, if you installed Avaya Call Reporting
on a server with IP Address 10.20.30.40, then enter http://10.20.30.40:9080. Do not use localhost:9080
or 127.0.0.1:9080 if you are installing the Recording Library on the same server as Avaya Call Reporting.
The exact IP Address and port must be specified.
7. Leave the default Recording System ID and press next.
8. Press Install.

7.2. Recording Library Configuration

1. Open Avaya Call Reporting once you have installed Recording Library.
2. Go to System Settings > Recording Libraries.
3. Click on the ellipsis next to “Recording Libraries”.
4. Select VMPro - Recording Library 1.
a. If no recording library exists, click “Add”.
b. Click on the drop-down and select “VM Pro”.
5. Review the following settings.
a. Recording Library IP Address: Enter the IP Address of the server that the Recording Library is installed on.
b. Server Address: Enter the IP Address of the server that the Avaya Call Reporting is installed on.
c. Select the ellipsis next to “Recording Library FTP Server Configuration”.
I. Check the Enable Recording Library FTP Server setting.
II. Create a Username.
III. Create a Password.
IV. Press OK.
d. Recording Storage Locations: Configure where the recordings will be stored. The default will be the
recording library directory where the Recording Library was installed. You will also be able to manage
your retention policies here.
6. Press OK and Save.
7. Open the Windows Services and restart the Avaya Call Reporting Recording Library service.

AVAYA 15
7.3. IP Office Configuration
Decide how you’d like to recordings to be created, either at the User, Group, Incoming Call Route, or Account
Code. The most common configuration uses User-Level.

USER-LEVEL CALL RECORDING

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "User" from the middle bar.
3. Select a user whose calls you would like to record.
4. In the individual user's window, select the "Voice Recording" tab.
5. Select the percentage of outbound and inbound calls to record in the Recording Outbound and
Recording Inbound fields. Select "On" to record all calls. You may also change the External field to
External & Internal if you wish to record internal agent calls as well.
6. Select Voice Recording Library in the Destination field for both the Recording (Auto) and
Recording (Manual) menus.
7. Press OK -> Save -> and Merge

GROUP LEVEL
1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Group" from the left sidebar.
3. Select a group whose calls you would like to record.
4. In the specific group’s menu, on the far right, select the "Voice Recording" tab.
5. Select the percentage of inbound calls to record in the Recording Inbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. If you wish to record internal group calls as well, set Auto Record Calls to External & Internal.
8. Press OK -> Save -> Merge

INCOMING CALL LEVEL

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Incoming Call Route" from the left sidebar.
3. Select an incoming call route you would like to record.
4. In the call route menu, navigate to the "Voice Recording" tab.
5. Select the percentage of inbound calls to record in the Recording Inbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. Press OK -> Save -> Merge

ACCOUNT CODE LEVEL

1. Open Avaya's IP Office -> Manager -> IP Office Configuration
2. Select "Account Code" from the left sidebar.
3. Select an account code whose associated calls you would like to record.
4. In the account code window, navigate to the "Voice Recording" tab.
5. Select the percentage of outbound calls to record in the Record Outbound field. Select "On" to
record all calls.
6. Select Voice Recording Library in the Recording (Auto) field.
7. Press OK -> Save -> Merge

AVAYA 16
7.4. Voicemail Pro FTP Configuration
1. Connect to the Voicemail Pro via Command Line.
a. Login to the root level of the Voicemail Pro.
b. Enter a SFTP command to connect to the Recording Library. For example, if the username I created in 7.2
was Administrator and my Recording Library IP Address was 10.11.12.13, I would enter “sftp
[email protected]”.
I. When prompted “Are you sure you want to continue connecting (yes/no)?” type “yes”.
II. Enter your password (the password created in 7.2) when prompted.
c. Once connected, you can enter “exit”.
2. Open the Voicemail Pro Client.
3. Click the Administration option at the top of the screen, then hover over Preferences and select General.
4. Go to the Voicemail Recording tab and enter the following settings.
a. FTP User Name: Enter the username created in 7.2.
b. FTP Password: Enter the password created in 7.2.
c. Remote FTP Location: Enter /.
d. Remote FTP Host: Enter the IP Address of the Recording Library server.
5. Press Test Connection to confirm the connection can be established.
6. Save and Make Live the settings.
7. Reboot the Voicemail Pro.

AVAYA 17
8.0. Accessing HTML Avaya Call Reporting and
Avaya Contact Center Agent (CCAC)
8.1. Accessing HTML version of Avaya Call Reporting through a web browser
1. Select the modern web browser of your choice. Google Chrome is recommended.
2. In the URL, type in the Avaya Call Reporting server IP Address followed by a colon, then the Apache
Tomcat port (typically 9080 by default), forward slash ‘web’. Example: 12.3.4.567:9080/web

8.2. Accessing Avaya Call Reporting Contact Center Agent Client

1. Select the web browser of your choice. Please note that if you are going to use the CCAC as a
softphone using WebRTC you must use Google Chrome or Edge.
2. In the URL, type in the Avaya Call Reporting server IP Address followed by a colon, then the Apache
Tomcat port (typically 9080 by default), forward slash ‘ccagent’. Example: 12.3.4.567:9080/ccagent
3. Select if you are going to run in a desktop mode where the CCAC connects to your desk phone or
WebRTC mode where your CCAC will act as your phone.
4. If running in WebRTC mode you must enter the phone password created in IP Office Manager User
Settings.
5. Enable WebRTC mode is enabled within Avaya Call Reporting. This is found under System Settings >
Voice Agent. Enable WebRTC and click save.

In order to use WebRTC, you must first enable https for Avaya Call Reporting. To do so:
1. Open Avaya Call Reporting
2. Go to Admin (System) -> System Settings -> Basic Settings
3. Click on the ellipses next to SSL Proxy Configuration
4. Switch “SSL Proxy Enabled” to “True”
5. Type in the Avaya Call Reporting Server IP address in the blank field
6. Copy the “DNS Record”
7. Hit “OK”
8. Hit “Save”. This may take up to five minutes to go into effect.
9. Once in effect, the “DNS Record” will be the new URL you will use to access the Contact Center
Agent Client. Paste the “DNS Record” in the URL followed by “/ccagent” Example: je9qt7cpdkath
tuuqkdl.acr.ximasoftware.com/ccagent
10. Hit enter, and you will now be taken to the Contact Center Agent Client.

AVAYA 18