DelTorq Universal Actuators

The New DelTorq Series 21 & 2Z DelTech

Pneumatic Rack and Pinion Actuators

Series 21 Series 2Z
ISO Drilling (Blue End Caps) Wide Base Drilling (Red End Caps)

What makes these actuators unique?

1. Base Drilling : The new DelTorq actuator has a wide variety of base drillings. The series 21 patterns the
ISO 5211 standard while the Series 2Z is compatible with a non-standard pattern. Please see the chart below
for all available drillings.
2. DelTorq Universal Insert : The DelTorq Universal Insert fits into the splined pinion of the actuator and
allows for Direct Mounting of most quarter turn products. See next page for available inserts.

Models, Torques, Bolt Circles

Actuator Size Double Acting Spring End Series 21 Series 2Z

Torque (in-lbs)* Torque (in-lbs)* Bolt Circles Bolt Circles
045 142 44 F03, F04, F05 N/A
055 248 88 F03, F05, F07 N/A
065 407 142 F05, F07 N/A
075 620 257 F05, F07 3.25”
085 894 354 F05, F07 3.25”
100 1381 531 F07, F10 3.25”
115 2274 858 F07, F10, F12 3.25”, 5.00”
125 2956 1106 F10, F12 3.25”, 5.00”
150 5106 2177 F10, F12 5.00”
175 7584 3044 F10, F12 4.92” **
200 11558 4655 F12, F16 4.92”, 6.50” **

* Torques are given for 80 psi air supply

** Available with blue end caps only
 DelTorq Universal Insert
The DeTorq Universal Insert enables adapting of one actuator to several stem configurations, including Double “D”, Square, and
Round and Keyed. The Series 21 uses inserts that allow for a direct mount to DelVal and Bray butterfly valves as well as ISO ball
valves while the Series 2Z utilizes inserts that direct mount to Keystone , ABZ, Demco, Norris , and Weco butterfly valves.

Actuator 21Series 2Z Series

Size
DelVal/Bray ISO Square Keystone/ABZ Demco Norris Weco Square
9 mm
045 N/A N/A N/A N/A N/A
11 mm
9 mm
055 .551 x .394 N/A N/A N/A N/A
11 mm
.551 x .394 9 mm
065 11 mm N/A N/A N/A N/A
.630 x .433
14 mm
.551 x .394 11 mm .563 x .375
075 .630 x .433 14 mm .625 x .438 .625 x .375 .686 x .500 5/8”
.748 x .512 17 mm .750 x .500
.551 x .394 11 mm .563 x .375
085 .630 x .433 14 mm .625 x .438 .625 x .375 .686 x .500 5/8”
.748 x .512 17 mm .750 x .500
.563 x .375
.630 x .433 14 mm
.625 x .438 .625 x .375 .686 x .500
100 .748 x .512 17 mm 5/8”
.750 x .500 .838 x .500 .875 x .625
.866 x .630 22 mm
.875 x .625
.563 x .375
.630 x .433 14 mm
.625 x .438 .625 x .375 .686 x .500
115 .748 x .512 17 mm 5/8”
.750 x .500 .838 x .500 .875 x .625
.866 x .630 22 mm
.875 x .625
.748 x .512 .625 x .438
.625 x .375 5/8”
125 .866 x .630 22 mm .750 x .500 .875 x .625
.838 x .500 7/8”
1.181 x .866 .875 x .625
.866 x .630 .750 x .500
22 mm .838 x .500 .875 x .625 7/8”
150 1.181 x .866 .875 x .625
27 mm .963 x .625 1.062 x .750 1 1/8”
1.38 dia. (RK) 1.125 dia. (RK)
.866 x .630 .750 x .500

Taurus DelTech Actuator Flyer 12/06

175 22 mm .838 x .500 .875 x .625 7/8”
1.181 x .866 .875 x .625
27 mm .963 x .625 1.062 x .750 1 1/8”
1.38 dia. (RK) 1.125 dia. (RK)
1.181 x .866 27 mm
200 1.38 dia. (RK) Contact Factory --- --- ---
1.97 dia. (RK) 36 mm

Blank inserts available in all sizes that can be machined by customer to their specific dimensional requirements.
All statements, technical information and recommendations in the bulletin are for general use only. DelTech is not responsible for suitability or compatibility of these products in relation
to system requirements. DelTech reserves the right to change or modify product design or product without prior notice.

DelTech Controls LLC DelVal Flow Controls Pvt. Ltd.

Distributor 6068 Highway 73 (A division of DelTech Controls LLC, USA)
Geismar, LA 70734 Office & Works : C.T.S. No 4270,
USA Elpro Compound, Chinchwadgaon,
Pune 411 033, INDIA
Phone: (225) 744-4326 Phone : 91-20-2746 0591,
27460593
Fax: (225) 744-4328 Fax: 91-20-27460589
Email : [email protected] Email : [email protected]

Ó 2006 Deltech Controls. All rights reserved Website : www.deltechcontrols.com