Scribd Logo
Upload

Welcome to Scribd!

  • 74 views

    Steel Hanger Column-1

    Uploaded by

    MohMohk
    The document proposes the design of steel hanger columns for bays 1, 2, and 3 of a new 6-storey police building with 2 basements being constructed. It provides the design parameters for the columns including the span length, steel yield and ultimate strengths, partial safety factors, column size, self-weight, and dimensions. It then calculates the factored axial load and verifies that the yield resistance of the selected cross-section exceeds the factored load, indicating the selected column size is adequate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Steel Hanger Column-1

    Uploaded by

    MohMohk
    74 views1 page
    The document proposes the design of steel hanger columns for bays 1, 2, and 3 of a new 6-storey police building with 2 basements being constructed. It provides the design parameters for the columns including the span length, steel yield and ultimate strengths, partial safety factors, column size, self-weight, and dimensions. It then calculates the factored axial load and verifies that the yield resistance of the selected cross-section exceeds the factored load, indicating the selected column size is adequate.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document proposes the design of steel hanger columns for bays 1, 2, and 3 of a new 6-storey police building with 2 basements being constructed. It provides the design parameters for the columns including the span length, steel yield and ultimate strengths, partial safety factors, column size, self-weight, and dimensions. It then calculates the factored axial load and verifies that the yield resistance of the selected cross-section exceeds the factored load, indicating the selected column size is adequate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    74 views1 page

    Steel Hanger Column-1

    Uploaded by

    MohMohk
    The document proposes the design of steel hanger columns for bays 1, 2, and 3 of a new 6-storey police building with 2 basements being constructed. It provides the design parameters for the columns including the span length, steel yield and ultimate strengths, partial safety factors, column size, self-weight, and dimensions. It then calculates the factored axial load and verifies that the yield resistance of the selected cross-section exceeds the factored load, indicating the selected column size is adequate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PROPOSED CONSTRUCTION OF A 6-STOREY POLICE BUILDING WITH 2-BASEMENT ON MK17-10912V AT

    Project :
    TOA PAYOH LORONG 8 (TOA PAYOH PLANNING AREA).

    Design code SS EN 1991-1-1, SS EN 1993-1-1, Job No. - Client


    Designed Date 22/04/2022
    Subject Design of Steel Hanger Column (Bay 1, 2 & 3)
    Checked Rev: No. -

    Design of Steel Hanger Column

    Span length, L = 2.625 m


    Yield strength, Fy = 275 N/mm2
    Ultimate strength, Fu = 410 N/mm2
    Partial factor, γm0 = 1.00
    γm2 = 1.25
    Column size, = 100 x 50 x 6 RHS
    Column own weight , = 0.03 kN
    Depth of column, h = 100 mm
    Width of column, b = 50 mm
    Thickness of column, t = 6 mm
    Area of column, A = 1620 mm2
    Factored Axial Load, NEd = 9 kN

    Yield Resistance of Section,


    Npl,Rd = Afy/γm0
    = 445.5 kN > NEd = 9 kN [OK]

    You might also like