4 3 2 1

REVISIONS

NOTES (UNLESS OTHERWISE SPECIFIED) REV ECR DESCRIPTION DATE APPROVED

1. ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE NOTED. Q 5491 NEW PART# 11/20/2014 JF

2. OPERATING TEMPERATURE: 0 C TO 45 C R ADDED 250mm STROKE 2/17/2017 BJC

3. ENCODER RESOLUTION: 5, 1, 0.1µm S 6248 ADDED PINOUT FOR SINGLE PHASE UNIT 11/1/2017 BJC

4. ENCODER REPEATABILITY: 4 COUNTS T 6276 UPDATED SPECIFICATIONS 11/17/2017 BJC

B M3X0.5 - 6H 6.0 B
3.0 X 90° VACUUM EXT.
(OPTIONAL)

10.0
0.0
60.0 -0.2 2.0

CABLE EXTEND
30.0 7.0 0.00
8.0-0.02 PIGTAIL (LG =0.5m) DB-26P
10.0 FLYING LEAD (LG =3.0m) DB-15P, POWER
+0.02
2.5 0.00 3.0
2.7 X 90° 20±1
6.0 13.0 ROD FULLY RET.
12.5
0.0
25.0 -0.2

M3X0.5 - 6H 6.0
(N = SEE ITEM 13)
M5X0.8 - 6H 8.0 5.0

7.0 5.0

21.0
M5x0.8 - 6g

+0.02 2.0
2.0 Ø2.5 0.00 3.0 + 0.02
6.0 4.0 2X 2.5 0.00 3
10.0
20.0 10.0 10.0
15.0
A A
B

A
FEMALE MALE

MATERIAL: NAME DATE

UNLESS OTHERWISE SPECIFIED 5807 VAN ALLEN WAY
ALL DIMENSIONS ARE IN MM DWN BY BJC 02/16/2017 SMAC CARLSBAD CA, 92008
BREAK EDGES AND REMOVE BURRS FINISH: MOVING COIL ACTUATORS (760) 929-7588
CHK BY
TOLERANCES SEE NOTES TITLE:
ENG APP
X.: 0.5 X.X: 0.1
MACHINE FINISH: 3.2 MFG APP
X.XX: 0.05 ANGLE: 0.1 LCA25-XXX-YY-Z
CONCENTRICITY: ±0.01 QA APP
ROUNDNESS: ±0.05 INTERPRET PER: PROPRIETARY AND CONFIDENTIAL
EDGE BREAKS: 0.02 MAX ASME Y14.5-2009 SIZE: PART NO: REV:
CHAMFER: 0.03 MAX THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF
REF. NUMBER LCA25
ALL DIMENSIONS AND TOLERANCES
ARE FINAL
THIRD ANGLE
PROJECTION
SMAC. ANY REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN PERMISSION
OF SMAC IS PROHIBITED.
B LCA25-XXX-YY-Z T
CONTRACT LCA25 SCALE: DO NOT SCALE SHEET: 1/2

4 3 2 1
 4 3 2 1

PIGTAIL
-6/-8(PIN 24 = NC)

LCA25-XXX-YY-6 LCA25-XXX-YY-2
PIN PIN
B DB-26P B
No DB-26P No
1 (L) PH. A+ 1 (L) PH. A+
2 (L) PH. B+ 2 (L) PH. B+
3 (L) PH. Z+ 3 (L) PH. Z+
4 NC 4 NC
5 NC 5 NC
6 NC 6 NC
FLYING LEAD
7 NC 7 NC -6/-8(PIN 5 = NC)
8 NC 8 NC FOR LCC-10 /LAC-1
POWER
9 NC 9 NC
10 (L) PH. A- 10 (L) PH. A- PIN DB-15P LCC-10
11 (L) PH. B- 11 (L) PH. B- No PIN
12 (L) PH. Z- 12 (L) PH. Z- 6P DETAIL
1 PH. A+ No
13 NC 13 NC 2 PH. B+ 1 GND
14 NC 14 NC 3 PH. Z+ 2 +V
15 NC 15 NC 4 +5 Vdc 3 MOTOR U (+)
16 NC 16 NC 5 NC 4 MOTOR V (-)
17 NC 17 NC 6 NC 5 MOTOR W
18 NC 18 NC 7 NC 6 NC
19 +5 VDC 19 +5 VDC 8 NC
20 5V RTN 20 5V RTN LAC-1
9 PH. A -
21 NC 21 (L) MOTOR+ 10 PH. Z - PIN
22 L. COIL (U) 22 (L) MOTOR+ 11 PH. B - 4P DETAIL
No
23 L. COIL (V) 23 (L) MOTOR- 12 5V RTN 1 GND
24 L.COIL (W) 24 (L) MOTOR- 13 NC 2 +V
25 NC 25 NC 14 NC 3 MOTOR +
26 NC 26 NC 15 NC 4 MOTOR -

LCA25-XXX-YY-Z
No DETAILS UNIT LCA25-010-55-2 LCA25-010-75-2 LCA25-025-15-6 LCA25-025-35-6 LCA25-025-55-2 LCA25-025-75-2 LCA25-050-15-6 LCA25-050-35-6 LCA25-100-15-6 LCA25-100-35-6 LCA25-150-15-6 LCA25-150-35-6 LCA25-200-15-6 LCA25-200-35-6 LCA25-250-15-6 LCA25-250-35-6

1 LINEAR STROKE mm 10 10 25 25 25 25 50 50 100 100 150 150 200 200 250 250

2 PEAK FORCE N 16 22 15 20.5 7.4 9.2 15 20.5 15 20.5 15 20.5 15 20.5 15 20.5

3 FORCE CONSTANT N/A 5.5 8 9.5 13 2.5 3 9.5 13 9.5 13 9.5 13 9.5 13 9.5 13
4 MAXIMUM CURRENT Amp 3 3.5 1.6 1.6 3 3 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

5 COIL RESISTANCE Ohm 7.5 13.0 15 30 7 13.6 15 30 15 30 15 30 15 30 15 30

6 MOVING MASS kg 0.085 0.085 0.076 0.076 0.076 0.076 0.082 0.082 0.10 0.10 0.12 0.12 0.14 0.14 0.16 0.16
A 7 TOTAL MASS kg 0.45 0.45 0.53 0.53 0.55 0.55 TBD TBD TBD TBD TBD TBD 1.3 1.3 1.52 1.52 A
8 DIMENSION (L) mm 130 130 130 130 130 130 155 155 205 205 258 258 310 310 362 362

9 DIMENSION (A) mm 110 110 110 110 110 110 135 135 185 185 236 238 290 290 342 342

10 DIMENSION (B) mm N/A N/A N/A N/A N/A N/A N/A N/A 90 90 115 115 140 140 192 192
(N) # MOUNTING
11 HOLES 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12

MATERIAL: NAME DATE

UNLESS OTHERWISE SPECIFIED 5807 VAN ALLEN WAY
ALL DIMENSIONS ARE IN MM DWN BY BJC 02/16/2017 SMAC CARLSBAD CA, 92008
BREAK EDGES AND REMOVE BURRS FINISH: MOVING COIL ACTUATORS
CHK BY (760) 929-7588
TOLERANCES SEE NOTES TITLE:
ENG APP
X.: 0.5 X.X: 0.1
MACHINE FINISH: MFG APP
X.XX: 0.05 ANGLE: 0.1 3.2 LCA25-XXX-YY-Z
CONCENTRICITY: ±0.01 QA APP
ROUNDNESS: ±0.05 INTERPRET PER: PROPRIETARY AND CONFIDENTIAL
EDGE BREAKS: 0.02 MAX SIZE: PART NO: REV:
ASME Y14.5-2009
CHAMFER: 0.03 MAX THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF
REF. NUMBER LCA25
ALL DIMENSIONS AND TOLERANCES
ARE FINAL
THIRD ANGLE
PROJECTION
SMAC. ANY REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN PERMISSION
OF SMAC IS PROHIBITED.
B LCA25-XXX-YY-Z T
CONTRACT LCA25 SCALE: DO NOT SCALE SHEET: 2/2

4 3 2 1