PROPOSED SCHEME FOR III//IV B.

TECH I SEM (5thSemester)

B.TECH. (ECE) 3RD YEAR I-SEMESTER SCHEME OF INSTRUCTION AND EXAMINATION
CODE HOURS PER WEEK MAXIMUM MARKS
CATEGORY COURSE CREDITS
NUMBER THEORY TUTORIAL LAB EXAM SESSIONALS TOTAL
Linear ICs &
PCC 3 0 0 70 30 100 3
Applications
PCC Control Systems 3 0 0 70 30 100 3
Antenna & Wave
PCC 3 0 0 70 30 100 3
Propagation
Pulse and Digital
PCC 3 0 0 70 30 100 3
Circuits
Analog
PCC and Digital 3 0 0 70 30 100 3
Communications
Professional
PEC 3 0 0 70 30 100 3
Elective-I
MC MOOCs-I 0 0 3 100 0 100 1.5
Linear ICs and
PCC Pulse Circuits 0 0 3 50 50 100 1.5
Lab
Analog
and Digital
PCC 0 0 3 50 50 100 1.5
Communications
Lab
Total 18 0 09 620 280 900 22.5

Professional Elective-I: 1. OOPS Through JAVA

2. Computer Network Engineering
3. Internet & Web Technology
4. Software Engineering

1
 LINEAR ICs AND APPLICATIONS

Periods Exam Sessional Exam Total

Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. To design and analyze different linear, non-linear and mathematical application circuits
using operational amplifier.
2. To design and analyze different filters using operational Amplifier.
3. To introduce the operation and applications of timers and PLL.
4. To discuss the concept and applications of ADC and DAC

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Understand the characteristics of op-amp (L2).
CO2: Analyze linear applications using op-amps (L4).
CO3: Analyze non-linear applications and filters using op-amps (L4).
CO4: Design Timers and PLL using functional ICs (L4).
CO5: Design A/D and D/A converters using Op-amp (L4).

SYLLABUS

UNIT-I: OPERATIONAL AMPLIFIERS

Design Aspects of Monolithic Op-Amps, Ideal Characteristics, AC and DC Characteristics, Data
sheet Specifications, Offset Voltages and Currents, Frequency Compensation Techniques,
Measurement of Op-Amp Parameters.

UNIT-II: LINEAR APPLICATIONS OF OP-AMPS

Inverting and Non-Inverting Amplifiers, adder, Subtractor, Instrumentation Amplifiers, Voltage
to Current and Current to Voltage Converters, Integrator, Differentiator, Oscillators, RC phase
shift Oscillator, Wein-bridge Oscillator.

UNIT-III: NON-LINEAR APPLICATIONS OF OP-AMPS

SIGNAL CONDITIONING CIRCUITS: Rectifiers, Peak Detection, Logarithmic Amplifier,
Wave form Generators, Multi vibrators, Square Wave Generators, Comparators and Schmitt
trigger, Analog Multiplexers, Sample and Hold Circuit.
ACTIVE FILTERS: Low pass filter, High pass filter, Band pass filter, Band elimination filter,
All-pass Filters, Higher Order Filters and their Comparison.

2
UNIT-IV: SPECIAL ICs
555 Timers, 556 Function Generator ICs and their Applications, Three Terminal IC Regulators,
IC 1496 (Balanced Modulator), IC 565 PLL and its Applications, Function Generators.

UNIT-V: DIGITAL TO ANALOG AND ANALOG TO DIGITAL CONVERTERS

DAC techniques, weighted resistor DAC, R-2R ladder DAC, inverted R-2R DAC, Different
types of ADCs-parallel Comparator type ADC, Counter type ADC, Successive approximation
ADC and dual type ADC, DAC and ADC specifications.

TEXT BOOKS:
1. Ramakant A.Gayakward, “Op-Amps and Linear Integrated Circuits”, 4th Edition, PHI,
2010.
2. Choudhary D. Roy, Shail B. Jain “Linear Integrated Circuits”, 5th Edition New Age
International Publishers.
3. G B Clayton, “Operational Amplifiers”, 5th Edition, Elsevier science, 2003.

REFERENCES:
1. K.R. Botkar, “Integrated Circuits”, 5th Edition, Khanna Publications 2010.
2. Jacob Millman, Arvin Grabel, “Microelectronics” 2nd Edition, McGraw Hill.

WEB RESOURCES:
1. http://nptel.ac.in/courses/117108038/
2.http://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-01sc-
introduction-to-electrical-engineering-and-computer-science-i-spring-2011/unit-3-
circuits/op-amps/

3
 CONTROL SYSTEMS
Periods Sessional Exam Total
Credits Exam Hrs. Marks Marks Marks
Theory Tutorial Lab
4 3 1 - 3 30 70 100

COURSE OBJECTIVES:
1.To introduce different types of system and identify a set of algebraic equations to
represent and model a complicated system into a more simplified form to interpret
different physical and mechanical systems in terms of electrical system to construct
equivalent electrical models for analysis.
2.To employ time domain analysis and diagnose transient performance parameters of the
system for standard input functions.
3.To formulate different types of analysis in frequency domain to explain the nature of
stability of the system.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Analyze Block Diagram systems and Signal Flow graphs modelling (L4)
CO2: Interpret different physical and mechanical systems in terms of electrical system to
construct equivalent electrical models for analysis (L2)
CO3: Examine time domain analysis to predict and diagnose transient performance
parameters of the system for standard input functions (L3)
CO4: Analyze stability of system by using RH Criteria and Root Locus. (L4)
CO5: Correlate different types of analysis in frequency domain to explain the nature of
stability of the system. (L4)

SYLLABUS

UNIT-I: INTRODUCTION TO CONTROL SYSTEMS

Introduction to Mathematical Modeling of Physical Systems, Equations of Electrical Networks,
Modeling of Mechanical Systems, Equations of Mechanical Systems, Analogous Systems.

UNIT-II: TRANSFER FUNCTIONS OF LINEAR SYSTEMS

Impulse Response of Linear Systems, Block Diagrams of Control Systems, Signal Flow Graphs
(Simple Problems), Reduction Techniques for Complex Block Diagrams and Signal Flow
Graphs (Simple Examples).

4
UNIT-III: TIME DOMAIN ANALYSIS
Time Response of First and Second Order Systems with Standard Input Signals, Steady State
Error Constants, Effect of Derivative and Integral Control on Transient and Steady State
Performance of Feedback Control Systems.

UNIT-IV: STABILITY ANALYSIS

Concepts of stability, Necessary conditions for Stability, Routh-Hurwitz Criterion, Relative
Stability Analysis, the Concept and Construction of Root Loci, Analysis of Control Systems
with Root Locus (Simple Problems to understand theory).

UNIT-V: FREQUENCY DOMAIN ANALYSIS AND STABILITY

Correlation between time and frequency response, Bode Plots, Polar Plots, Nyquist Stability
Criterion, Constant M and N Circles.

TEXT BOOKS:
1. Control Systems Engineering, I. J. Nagrath and M. Gopal, Wiley Eastern Ltd.
2. Automatic Control Systems, Benjamin C. Kuo, PHI Publication (5th Edition).

REFERENCES:
1. Modern Control Engineering, Ogata, PHI.
2. Control Systems Principles and Design, M.Gopal, McGrawHill.

WEB RESOURCES:
1. http://nptel.ac.in/courses/108101037/
2. http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-30-feedback-control-systems-
fall-2010/

5
 ANTENNAS AND WAVE PROPAGATION

Periods Exam Sessional Exam Total

Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. To understand various parameters of Antenna and its principle of operation.
2. To understand point sources, array of two isotropic sources and Uniform Linear Array
and to understand the principle of operation of V-antenna, rhombic antenna, helical antenna
and their practical usage.
3.To understand the concept of Micro strip antennas, Reflector antennas, lens and horn
antennas and their features, characteristics and design relations and to understand the
concept of measurement of various antenna parameters.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Identify the importance of antenna parameters and mechanism of radiation (L1).
CO2: Analyze the characteristics of wire and loop antennas (L4).
CO3: Analyze radiation patterns of antenna arrays (L4).
CO4: Design HF, VHF, UHF antennas and microwave antennas for given specifications.
Illustrate techniques to measure antenna parameters (L4).
CO5: Understand the concepts of radio wave propagation (L2)

SYLLABUS

UNIT-I: RADIATION AND ANTENNAS

Antenna definition and Functions, Network theorems, Properties of antennas, Antenna
parameters, Polarization, Basic antenna elements, Radiation mechanism, Radiation fields of
alternating current element, Radiated power and radiation resistance of current element,
Radiation, induction and electrostatic fields, Hertzian dipole, Different current distributions in
linear antennas, Radiation from half-wave dipole, Radiation from quarter wave monopole,
Radiation characteristics of dipoles.

UNIT-II: ANALYSIS OF LINEAR ARRAYS

Directional characteristics of dipole antennas, Radiation pattern of alternating current element,
Radiation pattern expressions of centre-fed vertical dipoles of finite length, Radiation patterns of
centre-fed vertical dipoles, Radiation patterns of centre-fed horizontal dipoles, Radiation patterns
of vertical dipoles, Two-element uniform array, Uniform linear arrays, Field strength of a

6
uniform linear array, First sidelobe ratio (SLR), Broadside and End-fire arrays, Patterns of array
of non-isotropic radiators, Multiplication of patterns, Generalized expression for principle of
pattern multiplication, Radiation pattern characteristics, Binomial arrays, Effect of earth on
vertical patterns, Effect of earth on radiation resistance, Methods of excitation, Impedance
matching techniques, Transmission loss between transmitting and receiving antennas - FRIIS
formula, Antenna temperature and signal-to-noise ratio.

UNIT-III: HF, VHF AND UHF ANTENNAS

Introduction, Isotropic radiators, Directional antennas, Omni-directional antennas, Resonant
antennas, Non-resonant antennas, LF antennas, Antennas for HF, VHF and UHF, Dipole arrays,
Folded dipole, V-Antennas, Inverted V-antennas, Rhombic antenna, Yagi-Uda antenna, Log-
periodic antennas, Loop antenna, Helical antenna, Whip antenna, Ferrite rod antenna, Turnstile
antennas, Discone antennas, Notch antenna.

UNIT-IV: MICROWAVE ANTENNAS AND ANTENNA MEASUREMENTS

Introduction, Rod reflector, Plane reflector, Corner reflector, Parabolic reflector, Types of
parabolic reflectors, Feed systems for parabolic reflectors, Shaped beam antennas, Horn
antennas, Corrugated horns, Slot antennas, Impedance of a few typical dipoles, Slots in the walls
of rectangular waveguides, Babinet’s principle, Lens antennas, Microstrip antennas,
Measurement ranges, Indoor and outdoor ranges, Antenna impedance measurements,
Measurement of radiation resistance, Gain measurements, Measurement of antenna bandwidth,
Directivity measurement, Measurement of sidelobe ratio, Measurement of radiation efficiency,
Measurement of antenna aperture efficiency, Measurement of polarization of antenna, Phase
measurement.

UNIT-V: WAVE PROPAGATION

Propagation characteristics of EM Waves, Factors involved in the propagation of radio waves,
Ground wave propagation, Ground wave field strength by Maxwell’s equations, Reflection of
radio waves by the surface of the earth, Roughness of earth, Reflection factors of earth, Wave tilt
of the ground wave, Tropospheric wave propagation, Atmospheric effects in space wave
propagation, Duct propagation, Radio horizon, Troposcatter, Fading of EM waves in
Troposphere, Line of sight (LOS), Ionospheric propagation, Characteristics of ionosphere,
Refractive index of ionosphere, Phase and group velocities, Mechanism of Ionospheric
propagation, reflection and refraction, Characteristic parameters of Ionospheric propagation, Sky
wave field strength, Fading and diversity techniques, Faraday’s rotation, Effect of earth’s
magnetic field.

7
TEXT BOOKS:
1. G.S.N. Raju, “Antennas and Wave Propagation”, Pearson Education (Singapore) Pvt.
Ltd., New Delhi, 2007.
2. C.A. Balanis, “Antenna theory”, 3rd Edition, John Wiley & Sons, 2009.

REFERENCES:
1. E. C. Jordan and K. G. Balmain “EM Waves and Radiation Systems”, PHI – N. Delhi,
1997.
2. John D. Kraus, Antennas, 2nd Edition, McGraw Hill, 1988.
3. K.D.Prasad, Satya Prakashan, “Antennas and Wave Propagation”, Tech Publications, 3rd
Edition, 2001.

WEB RESOURCES:
1. http://nptel.ac.in/courses/117107035/

8
 PULSE AND DIGITAL CIRCUITS

Periods Exam Sessional Exam Total

Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. To impart basic knowledge on linear non-linear wave shaping circuits.
2. To enable the students to know non-linear wave shaping circuits.
3. To make the students to design different types of Multivibrators using transistors
4. To make the students to acquire knowledge on basic concept of time base generators.
5. To make the students to know the working of voltage time base generators and sampling
gates.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO 1: Analyze the linear wave shaping circuits (L4).
CO 2: Analyze the non-linear wave shaping circuits (L4).
CO 3: Design Bistable Multivibrator using transistors (L4).
CO 4: Design Multivibrator using Monostable and Astable circuits (L4).
CO 5: Examine the voltage time base generators, sampling gates and logic families (L4).

SYLLABUS

UNIT-I: LINEAR WAVE SHAPING

High pass, low pass RC circuits, their response for sinusoidal, step, pulse, square, ramp and
exponential inputs. RC network as differentiator and integrator, Attenuators, its application in
CRO probe, RL and RLC circuits and their response for step input, Ringing circuit.

UNIT-II: NON-LINEAR WAVE SHAPING

Diode clippers, Transistor clippers, clipping at two independent levels, Transfer characteristics
of clippers, Emitter coupled clipper; Clamping operation, clamping circuits using diode with
different inputs, Clamping circuit theorem, practical clamping circuits, effect of diode
characteristics on clamping voltage, Transfer characteristics of clampers.

UNIT-III: BISTABLE MULTIVIBRATOR

Analysis And Design of Fixed Bias, Self-Bias Bistable Multi Vibrator, Collector Catching
Diodes, Commutating Capacitors, Triggering of Binary Circuits, Emitter Coupled Bistable
Multivibrator (Schmitt Trigger).

9
UNIT-IV: MONOSTABLE MULTIVIBRATOR
Analysis and Design of Collector Coupled Monostable Multi vibrator, Triggering of Monostable
Multivibrator, Applications of Monostable Multivibrator. Astable Multivibrator: Analysis and
Design of Collector Coupled Astable Multivibrator, Application of Astable Multivibrator as a
Voltage to Frequency Converter.

UNIT-V: VOLTAGE TIME BASE GENERATORS

Basic principles in Miller and Bootstrap time base generators, Transistor Miller time base
generator, Transistor Bootstrap time base generator.
Sampling Gates: Basic Operating Principles of Sampling Gates, Diode Unidirectional Sampling
Gate and Two-Diode Bi-Directional Sampling Gate, Four-Diode gates, Six- Diode Gates,
Applications of Sampling Gates. Logic Families: Diode Logic, Transistor Logic, Diode-
Transistor Logic, Transistor- Transistor Logic, Emitter Coupled Logic, CMOS Logic,
Comparison of Logic Families.

TEXT BOOKS:
1. Pulse, Digital and Switching Waveforms, J. Millman and H. Taub, Mothiki, S. Prakash
Rao, Mc Graw Hill, 2nd Edition, 2008.
2. Pulse and Digital Circuits, A. Anand Kumar, PHI, 2nd Edition, 2008.
3. Pulse & Digital Circuits, Venkata Rao.K, Ramasudha.K, Manmadha Rao G, Pearson, 1st
Edition, 2010.

REFERENCES:
1. Solid State Pulse circuits, David A. Bell, PHI, 4th Edition, 2002.
2. Wave generation and shaping, L. Strauss, International Student Edition.
3. Digital Principles and Applications, Leach & Malvino, SIE, 5th Edition, 1994.

WEB LINKS:
1 https://www.smartzworld.com/notes/pdc-pulse-and-digital-circuits/
2 http://nptel.ac.in/courses/117103064/22
3 http://www.electronics-tutorials.ws/filter/filter_1.html
4 https://electronicspost.com/v-i-characteristics-of-pn-junction-diode/

10
 ANALOG AND DIGITAL COMMUNICATIONS
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
4 3 1 - 3 30 70 100

COURSE OBJECTIVES:
To develop ability to analyze analog modulation systems.
To develop ability to analyze pulse analog and digital modulation systems.
To develop ability to analyze digital modulation systems.
To develop ability to analyze spread spectrum systems

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Analyze generation of amplitude modulated signals and their demodulation (L4).
CO2: Analyze generation of angle modulated signals and their demodulation (L4).
CO3: Understand transmission and reception of amplitude and angle modulated Signals
(L2).
CO4: Analyze process of analog to digital conversion and pulse analog & digital
modulation techniques (L4)
CO5: Analyze generation of digital modulated signals and their demodulation (L4), and
understand principles of spread spectrum systems (L2)

SYLLABUS

UNIT-I: AMPLITUDE MODULATION SYSTEMS

Introduction to Communication Systems: Need for Modulation, Frequency Translation, Method
of Frequency Translation, Amplitude Modulation, Modulation Index, Spectrum of AM Signal,
Modulators and Demodulators (Diode detector), DSB-SC Signal and its Spectrum, Balanced
Modulator, Synchronous Detectors, SSB Signal, SSB Generation Methods, Power Calculations
in AM Systems, Application of AM Systems. Principle of Vestigial side band modulation. Noise:
Source of Noise, External Noise, Internal Noise.

UNIT-II: ANGLE MODULATION SYSTEMS

Angle Modulation, Phase and Frequency Modulation and their Relationship, Phase and
Frequency Deviation, Spectrum of an FM Signal, Bandwidth of Sinusoidally Modulated FM
Signal, Effect of the Modulation Index on Bandwidth, Spectrum of Constant Bandwidth FM,
Phasor Diagram for FM Signals, FM Generation: Parameter variation method, Indirect method
of Frequency Modulation (Armstrong Method), Frequency Multiplication, PLL FM
Demodulator, Pre – emphasis and De – emphasis, Comparison of FM and AM.

11
UNIT-III: TRANSMITTERS AND RECEIVERS
Classification of Radio Transmitters, Principle of a Radio Transmitters, AM and FM
Transmitters, Radio receiver Types, AM Receivers, RF Section, Frequency Changing and
Tracking, Intermediate Frequency and IF Amplifiers, Automatic Gain Control (AGC); FM
Receivers, Amplitude Limiting, FM Demodulators, Ratio Detectors, ISB Receiver, Comparison
with AM Receivers

UNIT-IV: PULSE MODULATION METHODS

Sampling and it’s types, Quantization and it’s types, Quantization Noise, Pulse Analog
Modulation: PAM, PWM and PPM. Comparison of FDM and TDM. Pulse Code Modulation:
PCM Generation and Reconstruction, Companding, DPCM, Adaptive DPCM, DM and Adaptive
DM

UNIT-V: Digital Modulation Techniques and Spread Spectrum Modulation

ASK Modulator, Coherent ASK Detector, FSK- Modulator, Non Coherent FSK Detector, BPSK
Modulator, Coherent BPSK Detection. Similarity of BFSK and BPSK, Principles of QPSK, M-
ary PSK, M-ary, FSK, Minimum Shift Keying (MSK), Duo-binary Encoding.
Direct Sequence (DS) Spread Spectrum, Use of Spread Spectrum with Code Division, Multiple
Access (CDMA), Ranging using DS Spread Spectrum, Frequency Hopping (FH) Spread
Spectrum, Generation and Characteristics of PN Sequences

TEXT BOOKS:
1.An introduction to Analog and Digital Communications, Simon Haykin, John Wiley, 2005
2.Principles of Communication Systems, H. Taub , D. L. Schilling and Goutham Sahe,
TMH 3rd edition, 2007.
3.Principle of Communication Systems, Simon Haykins (2nd Edition).
4.Electronic Communication Systems, G. Kennedy, McGraw Hill, 1977 (2nd Edition).

REFERENCES:
1. Modern Digital and Analog Communication Systems, B. P. Lathi (2nd Edition).
2. Communication systems, R.P.Singh and S.D.Sapre 2nd edition TMH 2008
3. Electronic Communications Modulation and Transmission, Robert J. Schoenbeck, PHI
N. Delhi, 1999.
4. Analog and Digital Communication – K. Sam Shanmugam, Willey, 2005.

12
 PROFESSIONAL ELECTIVE-I
OOPS Through JAVA
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. To understand the significance of object-orientation in designing a s/w.
2. To design object-oriented applications using C++ and Java.
3. To understand the importance of Unified Modeling Language in s/w design.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Understand the importance of object-oriented concepts, UML and C++ programming
basics (L2).
CO2: Design applications using inheritance and polymorphism in C++ (L4).
CO3: Explain how exception handling, File I/O are handled in C++ (L2).
CO4: Familiarize with Object-Orientation using Java (L2).
CO5: Understand how to design applications using packages, interfaces and multithreading
in Java (L2).

SYLLABUS
UNIT-I: OBJECT ORIENTED PARADIGM
Procedural Paradigms, Introductions to OOPs, Concept of Data Abstraction Encapsulation,
Inheritance and Polymorphism, Introduction to U.M.L, Description of various U.M.L. Diagrams
with examples. C++ Programming Basics: data types, declarations, expressions and operator
precedence, functions, scope of variables.

UNIT-II: OBJECT ORIENTATION USING C++

Classes and objects, Constructors & Destructors, Operator overloading & type conversions.
Inheritance: Derived classes, syntax of derived classes, making private members inheritable,
single, multilevel, multiple, hierarchical, hybrid. Polymorphism: Pointers, virtual functions and
polymorphism-pointers to objects, this pointer, pointers to derived classes, virtual and pure
virtual functions.

UNIT-III: TEMPLATES, EXCEPTION HANDLING, CONSOLE I/O AND FILE I/O

Class templates, Function templates, member function templates, exception handling, managing
console I/O operations, working with files.
13
UNIT-IV: INTRODUCTION TO JAVA
Introduction, Classes and Objects, Arrays, strings and Vectors, Exception Handling, Managing
I/O files in Java.

UNIT-V: PACKAGES AND INTERFACE, AND MULTI-THREADING

Packages, Interfaces, creating, extending, stopping, blocking threads, thread states, thread
methods, exceptions, priority in threads, synchronization, Runnable interface.

TEXT BOOKS:
1. Herbert Schildt and F. Naughton, “JAVA 2.0- Complete Reference”.
2. Y.Daniel Liang, “Introduction to JAVA PROGRAMMING”, PHI.
3. E. Balagurusamy, “Object oriented Programming using C++”, PHI.
4. E. Balagurusamy, “Programming with JAVA- A primer”, PHI
5. Grady Booch Etal, “The Unified Modeling Languages User Guide”, Pearson Education.

REFERENCES:
1. N. Barkakati, “Object Oriented Programming in C++”, PHI.
2. Robat Laphore, “Object Oriented Programming through C++”.
3. Andrew Haigh, “Object Oriented Analysis and Design”, Tata McgrawHill.

14
 PROFESSIONAL ELECTIVE-I
COMPUTER NETWORK ENGINEERING
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. Describe how computer networks are organized with the concept of layered approach.
2. Explain the Physical layer, protocols and its functionalities.
3. Describe the Data link layer, protocols and its functionalities.
4. Explain the Network layer, protocols and its functionalities.
5. Summarize the functionalities of Transport layer and Application layer.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Describe the functions of each layer in OSI and TCP/IP model. (L2)
CO2: Explain the types of transmission media with real time applications. (L2)
CO3: Discuss the methods of error detection and correction. (L2)
CO4: Implement LAN using hubs, bridges and switches. (L4)
CO5: Analyze the protocols in Transport layer and application layer. (L4)

SYLLABUS

UNIT-I: INTRODUCTION
Uses of Computer Networks, Network Structure, Architectures, Services, Standardization,
Functions of Various Network Layers, Network models.

UNIT-II: PHYSICAL LAYER

Theoretical Basis for Data Communication, Transmission Media, Analog and Digital
Transmission, Transmission and Switching ISDN.
Medium Access Sub-layer: LAN, MAN, Protocol, ALOHA, IEEE Standard for 802 for LANs,
Fiber Optic Networks, Satellite Networks.

UNIT-III: DATA LINK LAYER

Design Issues, Error Detection and Correction, Protocols and their Performance, Specifications
and Examples.

15
UNIT-IV: NETWORK LAYER
Design Considerations, Difference between Gateway, Ethernet Switch, Router, Hub, Repeater,
Congestion Control Internetworking and Examples, Details of IP addressing schemes, TCP/IP
Protocol details.

UNIT –V: TRANSPORT AND APPLICATION LAYERS

The Transport Service, Elements of Transport Protocols, the Internet Transport Protocols; UDP,
the Internet Transport Protocols; TCP.
The Application Layer: The Domain Name System, Electronic Mail, the World Wide Web.

TEXT BOOKS:
1. Data Communications and Networking by Behrouz A. Forouzan, 2nd Edition, Tata
McGraw Hill.

REFERENCES:
1. Computer Networks, A. S. Tannenbaum, PHI – New Delhi.
2. Computer Networking Terminology Products and Standards, R. P. Suri and J. K. Jain,
Tata McGraw Hill.

16
 PROFESSIONAL ELECTIVE-I
INTERNET & WEB TECHNOLOGY
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. To get familiar with basics of the Internet Programming.
2. To acquire knowledge and skills for creation of web site considering both client and
server side programming
3. To gain ability to develop dynamic web applications

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO 1: Understand the various HTML tags, CSS to build static web pages and various
JavaScript functions for dynamic web page development (L2).
CO 2: Apply XML, Java beans and Servlets to develop the dynamic web pages (L3).
CO 3: Understand and development of web pages using JSP functionalities (L2).
CO 4: Develop the web applications using JSP (L6).
CO 5: Develop the web applications using Database and understands the Struts frame work
(L6).

SYLLABUS

UNIT I: HTML
Common tags List, Tables, images, forms, Frames; Cascading Style sheets; Java Script: -
Introduction to Java Scripts, Objects in Java Script, Dynamic HTML with Java Script

UNIT-II: XML
XML: Document type definition, XML Schemas, Document Object model, Presenting XML,
Using XML Processors: DOM and SAX.
Java Beans: Introduction to Java Beans, Advantages of Java Beans, BDK, Introspection, Using
Bound properties, Bean Info Interface, Constrained properties Persistence, Customizes, Java
Beans API, Introduction to EJB’s

UNIT-III: WEB SERVERS AND SERVLETS

Tomcat web server, Introduction to Servelets: Lifecycle of a Serverlet, The Servelet API, The
javax.servelet Package, Reading Servelet parameters, Reading Initialization parameters. The
javax.servelet HTTP package, Handling Http Request & Responses, Using Cookies-Session
Tracking, Security Issues
17
UNIT-IV: JSP APPLICATION DEVELOPMENT
Generating Dynamic Content, Using Scripting Elements Implicit JSP Objects, Conditional
Processing – Displaying Values Using an Expression to Set an Attribute, Declaring Variables
and Methods Error Handling and Debugging Sharing Data Between JSP pages, Requests, and
Users Passing Control and Date between Pages – Sharing Session and Application Data –
Memory Usage Considerations

UNIT-V: DATABASE ACCESS

Database Programming using JDBC, Studying Javax.sql.* package, Accessing a Database from
Servlets & JSP Page , Application – Specific Database Actions, Deploying JAVA Beans in a
JSP Page, Introduction to struts framework.

TEXT BOOKS:
1. Dietel and Nieto, “Internet and World Wide Web – How to program”, Pearson Education
Asia, 2008.
2. Deitel, Santry “Advanced Java™ 2 Platform How to Program”, Pearson Publication, 2001.
3. Hans Bergsten, SPD O’Reilly, “Java Server Pages”, SPD/O'Reilly Reprints

REFERENCES:
1. Steven Holzner “HTML Black Book: The Programmer's Complete HTML Reference
Book”, Coriolis Group, 2000.
2. Marty Hall and Larry Brown “Core Servelets and Java Server Pages Volume2: Core
Technologies”, Pearson Education.

18
 PROFESSIONAL ELECTIVE-I
SOFTWARE ENGINEERING
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
3 3 - - 3 30 70 100

COURSE OBJECTIVES:
1. Learn the importance of Object Oriented Software Engineering in Software Development.
2. Learn to develop problem statement and requirements elicitation.
3. Learn to design UML Diagrams.
4. Learn about analyzing, architectural models and design patterns.
5. Learn different testing methodologies.

COURSE OUTCOMES:
After successful completion of this course, the students will be able to
CO1: Understand the concepts related to development of Software Engineering (L2).
CO2: Understand the knowledge of requirements elicitation process (L2).
CO3: Draw the UML Diagrams for improving communication between client and developer
(L3).
CO4: Study different architecture models and design patterns by performing analysis (L1).
CO5: Study various testing strategies on the developed products and configuration
management (L1).

SYLLABUS

UNIT-I: SOFTWARE ENGINEERING

Software related problems, software engineering, concepts, and development activities

UNIT-II: PROJECT ORGANIZATION, COMMUNICATION AND REQUIREMENTS

Project Organization & communication concepts and their activities, Requirements elicitation &
its activities and managing requirements elicitation

UNIT-III: MODELING
Concepts, Modeling with UML

19
UNIT-IV: ANALYSIS, SYSTEM DESIGN AND OBJECT DESIGN
Analysis overview, concepts, activities and managing analysis, Design overview, concepts, and
activities, addressing design goals and managing system design, Object reuse, its activities &
managing reuse, Interface specification concepts & its activities and Managing object design

UNIT-V: TESTING AND SOFTWARE CONFIGURATION MANAGEMENT

Testing concepts, activities and managing testing, Configuration Management overview,
concepts, activities and managing configuration management

TEXT BOOKS:
1. Bernd Bruegge and Allen H. Dutoit, “Object-Oriented Software Engineering: Using UML,
Patterns and Java”, 2nd Edition, Pearson Education Asia.

REFERENCES:
1. Timothy C. Lethbridge and Robert Laganiere, “Object-Oriented Software Engineering:
Practical software development using UML and Java”, McGraw-Hill Higher education.
2. Stephen R Schach, “An Introduction to Object Oriented Systems Analysis and Design with
UML and the Unified Process”, Tata McGraw-Hill

20
 LINEAR ICs & PULSE CIRCUITS LAB
Periods Exam Sessional Exam Total
Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
1.5 - - 3 3 50 50 100

COURSE OBJECTIVES:
The main objectives of this course is
1.To know the Linear and Non Linear characteristics of Wave shaping circuits
2.To Measure the Parameters of Op-Amp
3.To Measure the frequency response of Active Filters
4.To check the working of Op-Amp in different applications

COURSE OUTCOMES:
After successful completion of the Course students able to
CO1: Understand the linear and Non Linear behavior of the wave shaping circuits
CO2: Analyze and design the frequency response of active filters
CO3: Measure the parameters of Op Amp
CO4: Demonstrate the applications of Op Amp and special IC circuits

LIST OF EXPERIMENTS
1. Linear wave shaping
2. Non-linear wave shaping
3. UJT as a Relaxation oscillator
4. Measurement of parameters of Op-amp
5. Schmitt trigger
6. Frequency response of Active filters
7. Op-amp as Wave form generator
8. IC-555 as an Astable Multivibrator
9. Study of Instrumentation Amplifier
10. Voltage regulator using IC-723
11. Monostable Multivibrator using IC-555

21
 ANALOG AND DIGITAL COMMUNICATIONS LAB

Periods Exam Sessional Exam Total

Credits
Theory Tutorial Lab Hrs. Marks Marks Marks
1.5 - - 3 3 50 50 100

COURSE OBJECTIVES:
1. To be able to observe different Analog Modulation and Demodulation techniques
2. To be able to determine frequency response of filters
3. To be able to perform Pulse Analog and Digital Modulation and Demodulation
4. To be able to observe different Digital Modulation and Demodulation techniques

COURSE OUT COMES:

At the end of the course the students will be able to
CO1: Analyze the operation of various Amplitude modulation and Demodulation Systems
(L4).
CO2: Analyze various Filtering techniques (L4).
CO3: Implement various Pulse Modulation techniques (L3)
CO4: Demonstrate various Digital modulation & demodulation systems (L3)

LIST OF EXPERIMENTS

1. Generation and Detection of Amplitude Modulation Signal.

2. Generation and Detection of frequency Modulation signal.
3. SSB-SC modulation and demodulation.
4. Low Pass Filter using passive components.
5. High Pass Filter using passive components
6. Generation and Detection of PAM signal.
7. Generation and Detection of PWM signal.
8. Generation and Detection of PPM signal.
9. Verify the operation of PCM.
10. Generation and Detection of ASK signal.
11. Generation and Detection of FSK signal.
12. Generation and Detection of PSK signal.

22