LIFTING CAPACITIES SK35SR-6

A
A: Reach from swing centerline to arm top
Rating over front B: Arm top height above/below ground
C: Lifting capacities in kilograms
B Shoe: Rubber shoe Dozer blade: Up
Rating over side or 360 degrees Relief valve setting: 23.0 MPa

SK35SR Arm: 1.37 m, Bucket: Without Shoe: 300 mm

A 1.0 m 2.0 m 3.0 m 4.0 m At Max. Reach
Radius
B
4.0 m kg 800 750 3.32 m
3.0 m kg 590 550 550 520 4.15 m
2.0 m kg 900 840 570 540 470 440 4.54 m
1.0 m kg 830 780 550 520 440 420 4.63 m
G. L. kg 1,530 1,390 800 740 530 500 460 430 4.45 m
-1.0 m kg *2,290 *2,290 1,550 1,400 800 740 550 510 3.95 m
-2.0 m kg *1,550 1,460 880 820 2.90 m

Notes: 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an
specified lift point radius and heights. Weight of all accessories must be deducted from the asterisk (*) are limited by hydraulic capacity rather than tipping load.
above lift capacities. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must before operating this machine. Rules for safe operation of equipment should be adhered to
make allowance for job conditions such as soft or uneven ground, out of level conditions, at all times.
side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by
3. Arm top defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines
with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN
Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135
www.kobelco-kenki.co.jp/english_index.html

SK35SRX-SA-101-140803 IF
 Full-Size Performance, Short-Radius Agility and Quiet Operation

COMPACT YET TOUGH MINI

The new KOBELCO SK35SR expand the horizons of mini
excavators, and offers practical performance features while
maintaining a short tail swing. The new Energy Conservation
Mode saves even more fuel, and Kobelco’s proprietary iNDr
Cooling System ensures quiet operation, protection from dust,
and easy maintenance. For greater operator comfort and safety,
the spacious cab design offers plenty of room and an
unobstructed view. It all adds up to enhanced full-size
performance, short-radius agility and a low-noise environment,
with exceptional performance features and a full range of
value-added functions.

1 2
 Full-Size Performance, Short-Radius Agility and Quiet Operation

COMPACT YET TOUGH MINI

The new KOBELCO SK35SR expand the horizons of mini
excavators, and offers practical performance features while
maintaining a short tail swing. The new Energy Conservation
Mode saves even more fuel, and Kobelco’s proprietary iNDr
Cooling System ensures quiet operation, protection from dust,
and easy maintenance. For greater operator comfort and safety,
the spacious cab design offers plenty of room and an
unobstructed view. It all adds up to enhanced full-size
performance, short-radius agility and a low-noise environment,
with exceptional performance features and a full range of
value-added functions.

1 2
 ENVIRONMENT PERFORMANCE

iNDr Cooling System Compact, yet, Big Performance

The Revolutionary Integrated Noise and Dust Reduction Cooling System Wide Working Range Short Tail Swing
A larger boom and arm are provided as standard equip- The compact tail swing improves operating efficiency in
ment to ensure a wider working range. limited space.

5,350 mm
The highly airtight engine compart-
Tail overhang:
ment and the offset duct contribute to
noise reduction. The iNDr filter fitted in 0 mm
front of the cooling system ensures
easy cleaning. The iNDr system on
the SR Series mini excavators fea-

4,870 mm
tures air intake at the front of the ma-
chine and air exhaust underneath. It
functions in the same way as the iNDr
System on the SR series machines.

3,050 mm
Visual Checking and Easy iNDr Filter iNDr Filter Blocks Out Dust
Cleaning The stainless-steel filter is extremely Outside air goes directly from the
Because the iNDr filter removes dust effective against dust, with 30-mesh intake duct through the iNDr filter for
from the intake air, cooling compo- wave-type screen that removes tiny dust removal.
nents stay dirt-free and do not require dust particles from the intake air.
regular cleaning. The iNDr filter itself
can be easily removed and cleaned Easy Transportability
without the use of tools. With an overall height of 2,510 mm, the machine is de-
signed for easy transport.

Overall height:
2,510 mm
•30-mesh means that there are 30 holes formed
by horizontal and vertical wires in every square
inch of filter.
Ultimate Low Noise
KOBELCO’s exclusive iNDr Cooling
System delivers amazingly quiet op-
eration.

at 1 m backward from
75 dB machine rear end and 1.5 m
height from ground level.

3 4
 ENVIRONMENT PERFORMANCE

iNDr Cooling System Compact, yet, Big Performance

The Revolutionary Integrated Noise and Dust Reduction Cooling System Wide Working Range Short Tail Swing
A larger boom and arm are provided as standard equip- The compact tail swing improves operating efficiency in
ment to ensure a wider working range. limited space.

5,350 mm
The highly airtight engine compart-
Tail overhang:
ment and the offset duct contribute to
noise reduction. The iNDr filter fitted in 0 mm
front of the cooling system ensures
easy cleaning. The iNDr system on
the SR Series mini excavators fea-

4,870 mm
tures air intake at the front of the ma-
chine and air exhaust underneath. It
functions in the same way as the iNDr
System on the SR series machines.

3,050 mm
Visual Checking and Easy iNDr Filter iNDr Filter Blocks Out Dust
Cleaning The stainless-steel filter is extremely Outside air goes directly from the
Because the iNDr filter removes dust effective against dust, with 30-mesh intake duct through the iNDr filter for
from the intake air, cooling compo- wave-type screen that removes tiny dust removal.
nents stay dirt-free and do not require dust particles from the intake air.
regular cleaning. The iNDr filter itself
can be easily removed and cleaned Easy Transportability
without the use of tools. With an overall height of 2,510 mm, the machine is de-
signed for easy transport.

Overall height:
2,510 mm
•30-mesh means that there are 30 holes formed
by horizontal and vertical wires in every square
inch of filter.
Ultimate Low Noise
KOBELCO’s exclusive iNDr Cooling
System delivers amazingly quiet op-
eration.

at 1 m backward from
75 dB machine rear end and 1.5 m
height from ground level.

3 4
 PERFORMANCE MAINTENANCE

Fuel Economy and Digging Power Easy Daily Maintenance

Start-up checks are essential for safe and reliable machine operation. All start-up checks can be performed at ground
Solid Digging Performance Travel Power level, with an easy-to-understand layout and cover design that simplify access and save time.
Assured Pump Flow and Pump Energy Conservation Mode Large Capacity Travel Torque Easy Access to Component Under the Seat
Pressure SK35SR equipped with S mode, The large capacity travel torque en-
Pump flow of 38.4 L/min for and pres- which lowers fuel consumption by up ables the machine to perform spin
sure of 23.0 MPa (relief valve setting), to 25 % over previous models. turn in low mode even when the dozer
maintain ample power. is pushing a heavy load.

Automatic Two-Speed Travel

Integrated-Flow Pump System
An automatic shift function ensures
The instant the machine begins to dig, smoother, more efficient travel on
extra output from the third pump worksite. When the High mode is se- Two-piece floor mats for easy washing Hour meter
(which otherwise powers the swing lected, the travel system will automati-
and dozer circuit) is directed to the One Touch Deceleration cally shift to Low mode whenever the
arm circuit and boom circuit (raise) for The machine features one-touch de- load or climbing grades requires more
added power. This ensures fast and celeration. It allows easy switching to power.
smooth arm and boom raising opera- an idling state, reduc-
tion even under heavy loads. ing the fuel consump- Travel Switch
tion while the machine
The travel lever is fitted with a button
is at rest.
for easy switching to H-Mode travel.

Powerful and Efficient

Dozer Performance Easy Access to
Cooling Unit
Dozer-Blade Shape iNDr filter
KOBELCO’s unique blade design
solves this problem by forming the
earth into an arc that always falls for-
ward. Because this prevents earth
from falling behind the blade, only “one
pass” is needed. (Patent pending)

Fuel tank
Easy Access to Engine Compartment

Hydraulic Pilot-Controlled Dozer

Operation Lever
The dozer lever fea-
tures hydraulic pilot High-grade Pre fuel filter with Air cleaner
control for precise fuel filter built-in water
separator
handling.

5 6
 PERFORMANCE MAINTENANCE

Fuel Economy and Digging Power Easy Daily Maintenance

Start-up checks are essential for safe and reliable machine operation. All start-up checks can be performed at ground
Solid Digging Performance Travel Power level, with an easy-to-understand layout and cover design that simplify access and save time.
Assured Pump Flow and Pump Energy Conservation Mode Large Capacity Travel Torque Easy Access to Component Under the Seat
Pressure SK35SR equipped with S mode, The large capacity travel torque en-
Pump flow of 38.4 L/min for and pres- which lowers fuel consumption by up ables the machine to perform spin
sure of 23.0 MPa (relief valve setting), to 25 % over previous models. turn in low mode even when the dozer
maintain ample power. is pushing a heavy load.

Automatic Two-Speed Travel

Integrated-Flow Pump System
An automatic shift function ensures
The instant the machine begins to dig, smoother, more efficient travel on
extra output from the third pump worksite. When the High mode is se- Two-piece floor mats for easy washing Hour meter
(which otherwise powers the swing lected, the travel system will automati-
and dozer circuit) is directed to the One Touch Deceleration cally shift to Low mode whenever the
arm circuit and boom circuit (raise) for The machine features one-touch de- load or climbing grades requires more
added power. This ensures fast and celeration. It allows easy switching to power.
smooth arm and boom raising opera- an idling state, reduc-
tion even under heavy loads. ing the fuel consump- Travel Switch
tion while the machine
The travel lever is fitted with a button
is at rest.
for easy switching to H-Mode travel.

Powerful and Efficient

Dozer Performance Easy Access to
Cooling Unit
Dozer-Blade Shape iNDr filter
KOBELCO’s unique blade design
solves this problem by forming the
earth into an arc that always falls for-
ward. Because this prevents earth
from falling behind the blade, only “one
pass” is needed. (Patent pending)

Fuel tank
Easy Access to Engine Compartment

Hydraulic Pilot-Controlled Dozer

Operation Lever
The dozer lever fea-
tures hydraulic pilot High-grade Pre fuel filter with Air cleaner
control for precise fuel filter built-in water
separator
handling.

5 6
 COMFORT

Comfortable Work Environment Comfortable Operating Environment

Hammer for emergency exit Opening/closing front window

The front window features gas
damper cylinders for smooth and easy
opening and closing.

Climate control
The climate control system is located
down and to the right of the seat,
keeping the rear view clear. Coat hook Room light

Two-speaker FM/AM radio with

station select

Vents to send cooled air toward the

operator if he desires.

Spacious Work Environment Easy Access Skylight

The newly designed, rectangular cab
is over 820 mm wide, with optimized
A wide-opening door and a left-hand
tilting control console with safety lever
Operator Safety
control layout for comfortable, easy that rises high, make it easy for opera-
operation. A greater window area fur- tors to enter and exit the cab.
ther improves visibility. A clear view is Reliable Cab Structure
provided at the rear, and there’s also The high-strength cab meets ROPS
more floor space, with a seat that and TOPS GUARD LEVEL 1 stan-
slides further to ensure plenty of leg Control Lever dards for greater operator safety.
room.
Precise proportional controls are inte-
grated into the joystick for ease of op-
eration.

Work Light
Working light is mount-
ed under the boom to
protect from damage.

7 8
 COMFORT

Comfortable Work Environment Comfortable Operating Environment

Hammer for emergency exit Opening/closing front window

The front window features gas
damper cylinders for smooth and easy
opening and closing.

Climate control
The climate control system is located
down and to the right of the seat,
keeping the rear view clear. Coat hook Room light

Two-speaker FM/AM radio with

station select

Vents to send cooled air toward the

operator if he desires.

Spacious Work Environment Easy Access Skylight

The newly designed, rectangular cab
is over 820 mm wide, with optimized
A wide-opening door and a left-hand
tilting control console with safety lever
Operator Safety
control layout for comfortable, easy that rises high, make it easy for opera-
operation. A greater window area fur- tors to enter and exit the cab.
ther improves visibility. A clear view is Reliable Cab Structure
provided at the rear, and there’s also The high-strength cab meets ROPS
more floor space, with a seat that and TOPS GUARD LEVEL 1 stan-
slides further to ensure plenty of leg Control Lever dards for greater operator safety.
room.
Precise proportional controls are inte-
grated into the joystick for ease of op-
eration.

Work Light
Working light is mount-
ed under the boom to
protect from damage.

7 8
 RELIABILITY

Reliable Construction

The boom, arm and swing bracket all have large cross-section segments for added attachment strength. SPECIFICATIONS WORKING RANGES Unit: mm
MODEL SK35SR MODEL SK35SR
Forged boom top Plate type pin Type SK35SR-6 Arm length 1.37 m
Machine Mass kg 3,770
Strong boom and arm Bucket Capacity m3 0.11
a- Max. digging reach 5,350
Bolt-tightened pins firmly lock the Bucket Width (with side cutter) mm 600 b- Max. digging reach
at ground level 5,200
boom and arm to prevent the Arm Length m 1.37
boom top from opening laterally. Bucket Digging Force kN 27.8 c- Max. digging depth 3,050
Arm Digging Force kN 22.4 d- Max. digging height 4,870
ENGINE e- Max. dumping clearance 3,490
Model YANMAR 3TNV82A-B
f- Min. dumping clearance 1,310
Water cooled, 4-cycle, 3-cylinder, direct injection,
Type g- Max. vertical wall digging depth 2,470
diesel engine
(ISO 9249) kW/min-1 17.1/2,400 h- Min. swing radius 2,320
Power Output
(ISO 14396) kW/min-1 18.1/2,400 i- Horizontal digging stroke
(ISO 9249) N•m/min-1 77.7/1,440 at ground level 2,400
Max. Torque
(ISO 14396) N•m/min-1 79.4/1,440 j- Dozer blade (height/depth) 395/320
Displacement L 1.331
Fuel Tank L 42
HYDRAULIC SYSTEM
Pump Two variable displacement pumps + One gear pump a
Max. Discharge Flow L/min 2 x 38.4, 1 x 19.2
b
Relief Valve Setting MPa 23.0
Hydraulic Oil Tank (system) L 20.4 (44.8) h
TRAVEL SYSTEM
Travel Motors 2 x axial-piston
Parking Brake Oil disc brake per motor
Travel Speed (high/low) km/h 4.4/2.5
Gradeability % (degree) 58 (30)
Drawbar Pulling Force kN 38.1
CRAWLER
Shoe mm Rubber
Shoe Width mm 300 d
Ground Pressure kPa 33.5 e
DOZER BLADE
Width x Height mm 1,700 x 345
Working Ranges (height/depth) mm 395/320 f
SWING SYSTEM
Swing Motor Axial piston motor j
Parking Brake Oil disc brake, hydraulic operated automatically
Swing Speed min-1 8.4
Tail Swing Radius mm 850 g
Min. Front Over the front mm 2,380 c i
Swing Radius At full boom swing mm 1,980
SIDE DIGGING MECHANISM
Type Boom swing
to the left degree 70
Offset Angle
to the right degree 60

GENERAL DIMENSIONS Unit: mm

4,820
1,530
850

225
725
R850

60°
2,510

50
G J
E
C

70°
F

720
300 1,400 1,560

120
1,700
1,700
Swing bracket Hydraulic piping Dozer Bucket 2,160
Large, thick cast-iron swing The hydraulic piping is housed Box construction dozer supports Cast-iron idler link provide
bracket/front bracket. inside the swing bracket. provide greater strength. greater strength.
9 10
 RELIABILITY

Reliable Construction

The boom, arm and swing bracket all have large cross-section segments for added attachment strength. SPECIFICATIONS WORKING RANGES Unit: mm
MODEL SK35SR MODEL SK35SR
Forged boom top Plate type pin Type SK35SR-6 Arm length 1.37 m
Machine Mass kg 3,770
Strong boom and arm Bucket Capacity m3 0.11
a- Max. digging reach 5,350
Bolt-tightened pins firmly lock the Bucket Width (with side cutter) mm 600 b- Max. digging reach
at ground level 5,200
boom and arm to prevent the Arm Length m 1.37
boom top from opening laterally. Bucket Digging Force kN 27.8 c- Max. digging depth 3,050
Arm Digging Force kN 22.4 d- Max. digging height 4,870
ENGINE e- Max. dumping clearance 3,490
Model YANMAR 3TNV82A-B
f- Min. dumping clearance 1,310
Water cooled, 4-cycle, 3-cylinder, direct injection,
Type g- Max. vertical wall digging depth 2,470
diesel engine
(ISO 9249) kW/min-1 17.1/2,400 h- Min. swing radius 2,320
Power Output
(ISO 14396) kW/min-1 18.1/2,400 i- Horizontal digging stroke
(ISO 9249) N•m/min-1 77.7/1,440 at ground level 2,400
Max. Torque
(ISO 14396) N•m/min-1 79.4/1,440 j- Dozer blade (height/depth) 395/320
Displacement L 1.331
Fuel Tank L 42
HYDRAULIC SYSTEM
Pump Two variable displacement pumps + One gear pump a
Max. Discharge Flow L/min 2 x 38.4, 1 x 19.2
b
Relief Valve Setting MPa 23.0
Hydraulic Oil Tank (system) L 20.4 (44.8) h
TRAVEL SYSTEM
Travel Motors 2 x axial-piston
Parking Brake Oil disc brake per motor
Travel Speed (high/low) km/h 4.4/2.5
Gradeability % (degree) 58 (30)
Drawbar Pulling Force kN 38.1
CRAWLER
Shoe mm Rubber
Shoe Width mm 300 d
Ground Pressure kPa 33.5 e
DOZER BLADE
Width x Height mm 1,700 x 345
Working Ranges (height/depth) mm 395/320 f
SWING SYSTEM
Swing Motor Axial piston motor j
Parking Brake Oil disc brake, hydraulic operated automatically
Swing Speed min-1 8.4
Tail Swing Radius mm 850 g
Min. Front Over the front mm 2,380 c i
Swing Radius At full boom swing mm 1,980
SIDE DIGGING MECHANISM
Type Boom swing
to the left degree 70
Offset Angle
to the right degree 60

GENERAL DIMENSIONS Unit: mm

4,820
1,530
850

225
725
R850

60°
2,510

50

70°
720
300 1,400 1,560

120
1,700
1,700
Swing bracket Hydraulic piping Dozer Bucket 2,160
Large, thick cast-iron swing The hydraulic piping is housed Box construction dozer supports Cast-iron idler link provide
bracket/front bracket. inside the swing bracket. provide greater strength. greater strength.
9 10
LIFTING CAPACITIES SK35SR-6
A
A: Reach from swing centerline to arm top
Rating over front B: Arm top height above/below ground
C: Lifting capacities in kilograms
B Shoe: Rubber shoe Dozer blade: Up
Rating over side or 360 degrees Relief valve setting: 23.0 MPa

SK35SR Arm: 1.37 m, Bucket: Without Rubber Shoe: 300 mm

A 1.0 m 2.0 m 3.0 m 4.0 m At Max. Reach
Max. Reach
B
4.0 m kg 800 750 3.32 m
3.0 m kg 590 550 550 520 4.15 m
2.0 m kg 900 840 570 540 470 440 4.54 m
1.0 m kg 830 780 550 520 440 420 4.63 m
G. L. kg 1,530 1,390 800 740 530 500 460 430 4.45 m
-1.0 m kg *2,290 *2,290 1,550 1,400 800 740 550 510 3.95 m
-2.0 m kg *1,550 1,460 880 820 2.90 m

Notes: 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an
specified lift point radius and heights. Weight of all accessories must be deducted from the asterisk (*) are limited by hydraulic capacity rather than tipping load.
above lift capacities. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must before operating this machine. Rules for safe operation of equipment should be adhered to
make allowance for job conditions such as soft or uneven ground, out of level conditions, at all times.
side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by
3. Arm top defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.

Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines
with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.

Inquiries To:
4690 World Houston Parkway Houston, TX 77032
http://www.kobelco-usa.com/

SK35SRX-SA-101-140803 IF