Scribd
Upload
643 views4 pages

Subwoofer Cross-Over Low Pass Filter IC PT2351: Tel: 886-2-66296288 Fax: 886-2-29174598

This document summarizes the PT2351 subwoofer cross-over low pass filter integrated circuit. It is an 8-pin CMOS chip that implements a second order low pass filter with a slope of -12dB/oct or a third order filter with -18dB/oct. It has single power supply operation from 3V to 9V and allows adjustment of the roll-off point with an external capacitor. Application circuits are provided to demonstrate basic low pass filtering for subwoofer audio systems using few external components.

Uploaded by

Apsara Dilakshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
643 views4 pages

Subwoofer Cross-Over Low Pass Filter IC PT2351: Tel: 886-2-66296288 Fax: 886-2-29174598

This document summarizes the PT2351 subwoofer cross-over low pass filter integrated circuit. It is an 8-pin CMOS chip that implements a second order low pass filter with a slope of -12dB/oct or a third order filter with -18dB/oct. It has single power supply operation from 3V to 9V and allows adjustment of the roll-off point with an external capacitor. Application circuits are provided to demonstrate basic low pass filtering for subwoofer audio systems using few external components.

Uploaded by

Apsara Dilakshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tel: 886-2-66296288

Fax: 886-2-29174598
URL: http://www.princeton.com.tw

Subwoofer Cross-Over Low Pass Filter IC PT2351

DESCRIPTION
PT2351 is an 8-pin subwoofer cross-over low pass filter chip utilizing CMOS Technology having a slope
rate of -12dB/oct or -18 dB/oct. Using an external capacitor, the roll-off point can be adjusted to meet
your needs or taste. PT2351 has low distortion, high input impedance and low output impedance design.
The application circuit and pin assignments are optimized for easy PCB Layout and cost saving benefits.

FEATURES
n CMOS Technology
n Single Power Supply: 3V to 9V
n Second Order Low Pass Filter Design with Slope Rate = -12dB/oct
n Third Order Low Pass Filter Design with Slope Rate = -18 dB/oct
n Low Output Impedance (Typ. 40 Ohms)
n Least External Components
n The Roll-Off Point can be adjusted using an External Capacitor
n 2-Channel Inputs are mixed to a Single Subwoofer Output
n Available in 8-pin, SO or DIP Package

APPLICATIONS
nMulti-Media Audio Subwoofer System
nAudio Equipment
nSound Card
nHome Theater System
nOther Audio Equipment

Ref. No. 2351 v1.2 1 Written Nov. 1999


Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw

Subwoofer Cross-Over Low Pass Filter IC PT2351

PIN CONFIGURATION

VDD 1 8 VSS
C1 2 7 C2
SOUT 3 6 VREF
RIN 4 5 LIN

PT2351

Ref. No. 2351 v1.2 2 Written Nov. 1999


Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw

Subwoofer Cross-Over Low Pass Filter IC PT2351

SECOND ORDER LOW PASS FILTER APPLICATION CIRCUIT


The Second Order Low Pass Filter application circuit only needs very few components. The Cross-Over
Filter Point can be adjusted by modifying the values of capacitors -- C1, and C2. For better circuit charac-
teristic, it is recommended that C2 be twice the value of C1. Please refer to the diagram below.

240 Ohms +12V

+
8.2 V 100µF

VDD VSS

C1 C2 C2
C1
SOUT VREF
+
RIN LIN 100µF
+
10µF
+ +
4.7µF PT2351 4.7µF
GND

SUB-OUT R-CH Input L-CH Input

Ref. No. 2351 v1.2 3 Written Nov. 1999


Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw

Subwoofer Cross-Over Low Pass Filter IC PT2351

THIRD ORDER APPLICATION CIRCUIT


If you need more High Frequency Attenuation, then you just need to add the R-C group between the
capacitor 4.7µF and the Input terminals (RIN and LIN) to achieve a Third Order Frequency Response.
Please refer to the diagram below.

240 Ohms +12V

+
8.2 V 100µF

VDD VSS

C1 C2 C2
C1
SOUT VREF
+
RIN LIN 100µF

+ + +
10µF 4.7µF PT2351 4.7µF

SUB-OUT R1 C3 C4 R2

R-CH Input L-CH Input

ORDER INFORMATION

Valid Part Number Package Type


PT2351 8 Pins, DIP
PT2351-S 8 Pins, SO

Ref. No. 2351 v1.2 4 Written Nov. 1999

You might also like