DeWet Gti MAF connector wires « on: June 08, 2018, 11:23:55 pm » Taking part
Im down to the last engine connnector to solve before changing my
Thank You engine 9 July. -Given: 0
-Receive: 0 I just paid quite a bit for the MAF connector from VW.....1k0971337 which Posts: 30 costed me $140 AUD
Anyways........this connector comes with the 3 wires on pin 1 -3. The
colours in order from pin 1 are white/yellow, green/yellow, black
Looking at the vw diagrams they all shows 4 wires with none matching these colours
Further to this when I look at pics on pelican parts site, the mk5 gti has colours yellow(cant see another colour with it), brown(I think with grey), black and blue
Looking at a photo of a friend's gti her golf had black and white on pin 3 and br on pin 2 and yellow on 1
Can anyone maybe help me figure this out so I can get the 3 wires connected to the correct locations on ECU etc?
Mine, a 2007 BPY, only has three wires...I can check which goes where.
OK, mine match your picture;
1-yellow
2-brown
3-black/blue stripe 4&5-empty
Great thanks. Any way you can trace them to pins on the ECU? Mine will be connected to a BWA engine and ECU but cant think that the pin location will be different on the ECU.
Sent from my SM-N920I using Tapatalk
Logged
ROH ECHT Re: Gti MAF connector wires « Reply #3 on: June 09, 2018, 08:02:07 pm Just look at my post count »
Thank You Not me...I wouldn't attempt tracing, sorry. -Given: 112
-Receive: 139 I hate electrical
I couldn't even find a wiring diagram last night. You can give this a search if you like; https://workshop-manuals.com/volkswagen/gti/l4- 2.0l_turbo_(bpy)/powertrain_management/computers_and_control_systems/a
DeWet Re: Gti MAF connector wires « Reply #4 on: June 09, 2018, 10:39:05 pm Taking part »
Thank You Quote from: ROH ECHT on June 09, 2018, 08:02:07 pm -Given: 0 -Receive: 0 Not me...I wouldn't attempt tracing, sorry. Posts: 30
I hate electrical
wiring diagram last night. You can give this a search if I couldn't even find a you like; https://workshop-manuals.com/volkswagen/gti/l4- 2.0l_turbo_(bpy)/powertrain_management/computers_and_control_systems/air_flo
Lol.
for the link, it looks like 2 is ground and 3 is 12v (15A feed) and Thanks then 1 should be signal to ECU.
« Last Edit: June 10, 2018, 10:41:59 pm by DeWet »
Logged
ROH ECHT Re: Gti MAF connector wires « Reply #5 on: June 13, 2018, 07:09:07 am Just look at my post count »
Thank You I would also assume they are similar electrically. There are a few -Given: 112 mechanical differences, but not likely with where the MAF connects. -Receive: 139
Pudding Re: Gti MAF connector wires « Reply #6 on: June 15, 2018, 06:02:27 pm Global Moderator » Just look at my post count
Have you got VCDS or OBD11? Do you get a reading on the MAF Thank You channel? If your MAF is the same 06F906461A part number as -Given: 2 European/US MAFs, then the wiring should be the same. My 2007 UK -Receive: 617 model is the same as ROH ECHTs. Posts: 7286
Logged
2007 ED30 | 2009 TDI 140
DeWet Re: Gti MAF connector wires « Reply #7 on: June 21, 2018, 10:49:47 pm Taking part »
Thank You Quote from: Pudding on June 15, 2018, 06:02:27 pm
-Given: 0 -Receive: 0 Have you got VCDS or OBD11? Do you get a reading on the MAF channel? Posts: 30 If your MAF is the same 06F906461A part number as European/US MAFs, then the wiring should be the same. My 2007 UK model is the same as ROH ECHTs.
VCDS. Im swapping my BLX cylinderhead with obe from a BWA in July
where I will replace manifolds, wiring and ECU.
as the wirjng is not part Will only know then when I try to wire in the MAF of the engine wiring harness going to injectors, turbo etc. BLX doesnt have MAF only temp sensor on airbox so this is why this thread started.
