Scribd
Upload
2K views4 pages

Swimming Pool Calculation

This document provides calculations for designing a swimming pool and kid pool. It calculates volumes, areas, filter sizing, pump sizing, and chemical dosing needs. The swimming pool is 62 square meters with a volume of 99.2 cubic meters. Two high rate sand filters of 0.288 square meters each are selected. The water balancing tank volume is calculated to be 7.5 cubic meters. Pumps of various sizes are selected to meet the calculated head losses and flow rates needed. Chemical dosing pumps are also sized based on the pool volumes and flows.

Uploaded by

Yazeed Abu Affar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views4 pages

Swimming Pool Calculation

This document provides calculations for designing a swimming pool and kid pool. It calculates volumes, areas, filter sizing, pump sizing, and chemical dosing needs. The swimming pool is 62 square meters with a volume of 99.2 cubic meters. Two high rate sand filters of 0.288 square meters each are selected. The water balancing tank volume is calculated to be 7.5 cubic meters. Pumps of various sizes are selected to meet the calculated head losses and flow rates needed. Chemical dosing pumps are also sized based on the pool volumes and flows.

Uploaded by

Yazeed Abu Affar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Swimming Pool Calculation

Area of swimming pool = 62m2.


Depth of swimming pool = 1.6m.
Volume = 62 * 1.6 = 99.2m3.
Length of overflow edge L = (10 + 6.2 + (2 * 0.35) ) * 2 = 34 m
using DIN 19643-1 : 1997-04.
Water area per person = 4.5 m2.
K : Load capacity factor 0.6 .

Flow = .

Filters:

Choose two filters swim quip HRP 24 High- rate sand filters each of area = 3.1
ft2 = 0.288m2.

Water balancing tank


V = Vv + Vw + VR
Vv = volume of water displaced by bathers = 0.075

No. of Bathers =
Vv = 0.075 * 14 = 1.05m3.
VR = Water volume for backwashing 6 AF where AF filter Area.
VR = 6 * 0.288 = 1.728 m . 2

For two filters = 2 * 1.728 = 3.456 m3.


Vw=volume of water expelled by waves. Vw
Vw
= 2.58m3

total balancing tank volume = Vv + VR + VW


= 1.05 + 1.728 + 2.58
= 7.08m3
Take it as 7.5m3

Make up water = 30L/bather/day


= 30 * 1.4 /hr = 420L/hr
= 0.117L/S
Pool Heating:

It is recommended to warm up pool water with 0.250C/hr gradient, hence.

= 28.8KW.

Select calorex H/C model electric with maximum flow of


main pipe 3ً UPVC.

Inlets ( side wall) of over flow:

Using DIN 19643-11997-04


Inlets shall be arranged with their spacing not exceeding one-third of the pool
width.
Pool maximum width = 6m.
1/3 of width = 2m
using 5 inlets
flow at inlet = use connection inlet Certikin
CK5015 .
use 50% of flow for overflow outlets (8 outlet) = 23/8 = 1.44m3/hr = 0.4L/s.
Use 1ً connection outlet.

Kid Pool:

Use pools for non swimmer.


Area = 7.07m2.
Depth = 0.6m.
Volume = 4.24m3.
Pool perimeter = 9.42m.
Using DIN 19643-1:1997-04.
Water area per person = 2.7m2.
Flow required = = 4.4m3/hr = 1.2L/s.

Filter:

Choose filter swim Quip HRS 16 with 21GPM Area of filter = 1.4ft2 = 16ً =
0.13m2.
Balance Tank:

Vv = 0.075 * No of person
= 0.075 * =0.225m3.
VR 6AF.
= 6 * 0.13 = 0.78m3.
Vw =
=
= 0.32m3.

Balance tank volume = 0.225 + 0.78 +0.32


= 1.32m3.
take it 1.5m3

Pumps:

Swimming pool pump 6.4L/s (P-1).


Friction losses = inlet overflow ( 25 + 25 ) * 1.5 * 0.03 = 2.25m.
Static head = 3.7m
Filter = 2m

Residual pressure = 0.02 * width = 0.12m.


Total = 8m = 80Kpa.

Select Certikin BP commercial pump 2.5 HP.

kid pool pump 1.2L/s (P – 2)


Head = 6m 60 Kpa
Select Certikin Aquatron 111 0.5HP.

Chiller / heater pump 1.8L/s


Head = 1.6m 106Kpa
Select Aquatron 111 0.75 H.P

Chemical dosing for swimming pool


Flow = 23m3/hr
Chlorine pump capacity
CD = 10gm/m3 for outdoor pool (chlorine dosage).
CC = 120gm/lt (Chlorine concentration)
= 1.9L/hr.
PH metering pump = 1.9L/hr = chlorine pump
AL-sulfate metering pump = 1.5 * chlorine pump
= 2.88L/hr.

chemical Dosing for Kid Pool


flow = 4.4m3/hr
chlorine pump capacity
L/hr.

PH metering pump = chlorine pump = 0.4L/hr.


AL-sulfate metering pump = 1.5 * 0.4 = 0.6L/hr.

You might also like