0% found this document useful (0 votes)
272 views1 page

PSV Calculation Report - Gas / Vapor Relief Sizing Case: Const. Var

This document provides a summary of the calculations performed to size a pressure safety valve (PSV) for a gas/vapor relief application. The PSV is designed to safely relieve 5276.19 lb/h of vapor at 255.52°F and 140 psiG in the event of a fire. The selected orifice size is 0.5 in2, with a calculated required orifice of 0.24 in2. Inlet and outlet piping sizes were also checked to ensure critical flow velocities and pressures are not exceeded.

Uploaded by

sugeng wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
272 views1 page

PSV Calculation Report - Gas / Vapor Relief Sizing Case: Const. Var

This document provides a summary of the calculations performed to size a pressure safety valve (PSV) for a gas/vapor relief application. The PSV is designed to safely relieve 5276.19 lb/h of vapor at 255.52°F and 140 psiG in the event of a fire. The selected orifice size is 0.5 in2, with a calculated required orifice of 0.24 in2. Inlet and outlet piping sizes were also checked to ensure critical flow velocities and pressures are not exceeded.

Uploaded by

sugeng wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PSV Calculation Report - Gas / Vapor Relief Sizing Case

PSV General Data

Item PSV V1001 -1 Design Code ASME VIII

Service Design Temperature 200.00 °F

Fluid 3_ @Main Relief Phase Vapor Fire Case True

Valve Type Conventional Sizing Method Vapor Emergency Fire

Body Mat'l Carbon Steel Rupt. Disk False Discharge To Flare

Fluid Properties @ Relieving PSV Coefficients

Spec Heat Ratio (K) 1.0532 Molecular Weight 85.56 C 321.5 Kb 1.000
6 0
Gas Compressibility (Z) 0.8228 Viscosity 0.2051 cP Kd 0.975 Kc 1.000
0 0

Process Data @ Relieving

Atm. Pressure 14.70 psiA Superimposed Const. 24.70 psiA


Back Press.
Var. 0.00 psi
Relieving Flow 5276.19 lb/h

Relieving Temp 255.52 °F Builtup Back Press 3.00 psi

Set Pressure 140.00 psiG Total Back Press 13.00 psiG

Over Pressure 21.0 % Max. Allowable Back Press: 14.00 psiG

Valve Sizing Results

Type of Flow Critical Selected Orifice 0.50 in² % Used 47.7 %

Selected Capacity 11069.32 lb/h


Calculated Orifice 0.24 in²
Orifice Designation 1.5 " # 150 G 3 "# 150
Noise 97.34 dBA @ 98.43 ft
Reaction Forces 103.71 lbf

Inlet / Outlet Lines Sizing Results

N.D. Eq. Calc. Calc. Max Avg Avg Exit Crit. Crit.
I.D. Rough.
Sch. Length Flow DP DP vel. Rho v2 Vel. Vel. Press.
(in)
(in) in ft lb/h psi psi ft/s lb/ft/s² ft/s ft/s psiG

IN 2 STD 2.07 0.0018 10.00 11069.32 1.07 4.20 61.75 8147.75 - - -

OUT 3 STD 3.07 0.0018 10.00 11069.32 1.07 4.00 205.68 12318.97 213.34 661.60 15.78

Calculation Notes

Record 1 of 1 2/20/2019 8:06:11 PM

You might also like