4

© Siemens AG 2011

Bevel helical geared motors

Orientation
4/2 Overview
4/4 Modular system

General technical data

4/5 Permissible radial force

Geared motors up to 200 kW

4/6 Selection and ordering data

Transmission ratios and

maximum torques
4/60 Selection and ordering data

Mounting types
4/80 Selection and ordering data

Shaft designs
4/83 Selection and ordering data

Flange-mounted designs
4/86 Selection and ordering data

Mounting types and

mounting positions
4/87 Selection and ordering data

Special versions
4/92 Lubricants
4/93 Oil level control
4/93 Gearbox ventilation
4/94 Oil drain
4/94 Sealing
4/95 Hollow shaft cover (protection cover)
4/95 Reinforced output shaft bearings
4/96 2nd output shaft extension
4/96 Bevel helical gearbox with
backstop
4/97 Mixer flange in dry-well design

Dimensions
A.G.P. Representaciones S.A.S 4/98 Dimension drawing overview
Calle 21A No. 70 - 40, Bodega UA 7 - 1 4/102 Dimension drawings
Bogota, Colombia
Tel. : +57 1 5706353
Fax : +57 1 5707335
[email protected]
www.agp.com.co

Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Orientation

■ Overview
MOTOX bevel helical gearboxes are part of the MOTOX modular
system. With helical, parallel shaft, helical worm, or variable
speed gearboxes and three-phase AC motors with or without
brakes, this system covers all possible drive combinations, right
up to electronic variable speed drives.

MOTOX bevel helical gearboxes are designed for continuous

duty. The gearbox housings made of gray cast iron or aluminium
are developed in 3D CAD and have an optimized structure in
terms of rigidity and vibration absorption. Radial shaft seals with
dust-protection lips prevent oil from leaking out of the housing
and dust and water from entering it. The gear wheels of the heli-
cal gear stages are milled and their surfaces hardened.
The tooth flanks are ground or honed so that they are convex
and corrected in terms of the profile. For the standard range, the
bevel gear stage is milled, its surface is hardened, and it is
lapped in pairs. Optimum running smoothness is also achieved
4 thanks to the helical gears' helical teeth.
Positioning the bevel gear stage as the second stage means that
less noise is emitted. The output shaft is positioned at a right
angle to the input shaft.

4/2 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Orientation

■ Overview (continued)
Bevel helical gearboxes are designated as follows: Example:
Gearbox type: K F X 108 - Z 38 - K4 (100)
(-) Bevel helical gearbox Gearbox type
Type
B 2-stage Backstop
K 3-stage
Size
Transmission stage (-) Unspecified Type interm. gearbox
Type: Size
Shaft (-) Solid shaft Input unit
A Hollow shaft (for motor size)
Mounting (-)
Foot-mounted design
F Flange-mounted design (A-type)
Z Housing flange (C-type) The series currently comprises 10 gearbox sizes.
D Torque arm Type K bevel helical gearboxes are available in a 3-stage
G Flange (A-type) on opposite side to
output shaft
version, type B in a 2-stage version. 4
M Agitator / mixer flange
E Extruder flange
Connections (-) Feather key
S Shrink disk
T Hollow shaft with splined shaft
Special features W Reduced-backlash version
Backstop X Backstop in intermediate stage
Type of intermediate gearbox
(-) Helical gearbox
Transmission stage Z 2-stage
D 3-stage
Input unit
K2 Coupling lantern with flexible coupling for
connecting an IEC motor
K2TC Coupling lantern with flexible coupling for
connecting a NEMA motor 1)
K4 Short coupling lantern with clamp connection for
connecting an IEC motor
K5 Short coupling lantern with clamp connection for
connecting a NEMA motor 1)
KQ Lantern for servomotor with feather key and with
zero-backlash flexible coupling for connecting a
servomotor
KQS Lantern for servomotor without feather key and with
zero-backlash flexible coupling for connecting
a servomotor
A Input unit with free input shaft
A5 Input unit with free input shaft (NEMA design) 1)
P Input unit with free input shaft and piggy back for
connecting an IEC motor
P5 Input unit with free input shaft and piggy back for
connecting a NEMA motor 1)
PS Input unit with free input shaft and piggy back with
protection cover

1)
These designs can be selected from our MOTOX Configurator electronic catalog.

Siemens D 87.1 · 2011 4/3

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
General technical data
Modular system

Bevel helical gearbox Input units and motor mounting

G_D087_EN_00062

Main gearbox Intermediate gear Input side

■ Use
The MOTOX bevel helical gearbox series can be supplied in The gearboxes are available in a solid-shaft or hollow-shaft
foot-mounted or flange-mounted design for mounting in any design with a feather key connection, shrink disk connection,
position. or splined shaft.

■ Oil quantities
The oil quantities corresponding to the applicable mounting
positions are specified in the operating instructions and on the
rating plate.

4/4 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
General technical data

■ Permissible radial force FRperm

3-stage bevel helical gearbox – standard bearing arrangement

FRperm in N with x = l/2 for output speeds n2 in rpm

Gearbox d l y z a Direction of ≤ 16 ≤ 25 ≤ 40 ≤ 63 ≤ 100 ≤ 160 ≤ 250 ≤ 320 ≤ 400
type mm mm mm mm kNmm rotation when
viewing the
output shaft
BF28 20 40 138 118 63.4 Left – 3 170 3 170 3 170 3 170 3 120 2 870 2 520 2 430
Right – 3 170 3 170 3 170 3 170 3 170 3 120 2 770 2 260
BF38 30 60 173 143 193.0 Left – 6 446 6 060 4 840 3 960 3 820 3 570 3 430 3 240
Right – 6 446 6 446 5 690 4 730 4 350 3 860 3 670 3 430
KF38 25 50 146 121 153.0 Left 5 530 5 400 4 320 3 810 3 210 2 640 2 160 2 080 –
Right 5 820 5 700 4 610 4 060 3 420 2 820 2 330 2 250 –
KF48 30 60 176 146 255.0 Left 8 280 7 660 6 120 4 990 3 850 3 490 3 420 – –
Right 8 500 8 090 6 560 5 430 4 280 3 900 3 630 – – 4
KF68 40 80 213 173 440.0 Left 9 490 7 590 6 130 4 430 3 550 2 970 3 470 – –
Right 10 050 8 140 6 690 4 990 4 110 3 490 3 720 – –
KF88 50 100 262 212 845.0 Left 13 740 10 910 9 010 6 300 5 550 4 840 5 560 5 210 –
Right 14 810 11 980 10 080 7 370 6 520 5 710 5 950 5 570 –
KF108 60 120 298 238 1 350 Left 16 210 12 070 8 990 6 470 5 730 5 310 5 450 – –
Right 18 170 14 030 10 850 8 290 7 370 6 730 6 260 – –
KF128 70 140 372 302 2 247 Left 24 380 19 170 14 150 10 790 6 550 6 160 7 250 – –
Right 26 540 21 330 16 320 12 960 8 680 8 200 8 310 – –
KF148 90 170 434 349 2 873 Left 19 620 13 920 9 150 3 620 1 240 840 6 360 5 700 –
Right 22 310 16 620 11 840 6 310 3 800 3 080 7 370 6 630 –
KF168 110 210 518 413 5 891 Left 31 190 21 030 16 060 7 200 6 020 5 300 10 160 – –
Right 34 350 24 180 19 220 10 350 8 810 7 880 11 530 – –
KF188 120 210 598 493 8 159 Left 77 700 77 700 77 700 77 700 77 240 70 580 – – –
Right 77 700 77 700 77 700 77 700 77 700 73 960 – – –

3-stage bevel helical gearbox – reinforced bearing arrangement

FRperm in N with x = l/2 for output speeds n2 in rpm

Gearbox d l y z a Direction of ≤ 16 ≤ 25 ≤ 40 ≤ 63 ≤ 100 ≤ 160 ≤ 250 ≤ 320
type mm mm mm mm kNmm rotation when
viewing the
output shaft
KF68 40 80 213 173 555 Left 13 870 13 870 13 870 13 870 13 870 12 690 11 510 –
Right 13 870 13 870 13 870 13 870 13 870 13 240 11 780 –
KF88 50 100 262 212 1 182 Left 23 630 23 630 23 630 23 630 23 000 20 590 18 910 17 880
Right 23 630 23 630 23 630 23 630 23 630 21 400 19 320 18 270
KF108 60 120 298 238 1 743 Left 29 050 29 050 29 050 29 050 28 280 25 080 23 640 –
Right 29 050 29 050 29 050 29 050 29 050 26 010 24 500 –
KF128 70 140 372 302 2 893 Left 41 330 41 330 41 330 41 330 41 330 39 430 36 540 –
Right 41 330 41 330 41 330 41 330 41 330 40 660 37 680 –
KF148 90 170 434 349 4 225 Left 49 710 49 710 49 710 49 710 42 240 37 130 38 240 35 110
Right 49 710 49 710 49 710 49 710 44 970 39 520 39 320 36 100
KF168 110 210 518 413 8 059 Left 76 750 76 750 76 750 76 750 70 560 65 140 59 690 –
Right 76 750 76 750 76 750 76 750 73 550 67 890 61 160 –
KF188 120 210 598 493 8 159 Left 77 700 77 700 77 700 77 700 77 240 70 580 – –
Right 77 700 77 700 77 700 77 700 77 700 73 960 – –

The values in the table apply to the worst-case scenario. The output shaft
bearing arrangement can be calculated using our MOTOX Configurator
electronic catalog. See Chapter 1 of the configuring guide for more
infomation on calculating the permissible radial force.

Siemens D 87.1 · 2011 4/5

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data

The selection tables show the most common variants and At the available transmission ratios, they cover the majority of
combinations. Other combinations can be selected using our output speeds.
MOTOX Configurator or made available on request
Due to their prevalence, 4-pole geared motors are easily
At an identical power rating and output speed, priority is given available, with short delivery times and at a low cost. They also
in the selection tables to 4-pole geared motors. feature a favorable size / power ratio.

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.09 K.48-LA71M8
3.7 231 1.9 169.53 ★ 2KJ1503 - 7CE13 - 77 J2 P02 25
K.38-LA71M8
3.5 244 1.0 179.13 ★ 2KJ1502 - 7CE13 - 77 L2 P02 21
4 4.0 217 1.2 159.04 2KJ1502 - 7CE13 - 77 K2 P02 21
4.5 190 1.3 139.43 ★ 2KJ1502 - 7CE13 - 77 J2 P02 21
K.38-LA71B6
5.0 172 1.5 179.13 ★ 2KJ1502 - 7CB13 - 77L2 P01 21
5.6 153 1.6 159.04 2KJ1502 - 7CB13 - 77K2 P01 21
6.4 134 1.9 139.43 ★ 2KJ1502 - 7CB13 - 77J2 P01 21
7.2 120 2.1 124.78 2KJ1502 - 7CB13 - 77H2 P01 21
0.12 K.188-D68-LA71B4
0.05 15 541 1.3 27 817 2KJ1542 - 7CB13 - 77M1 749
0.05 16 836 1.2 30 135 ★ 2KJ1542 - 7CB13 - 77N1 749
0.06 12 269 1.6 21 961 2KJ1542 - 7CB13 - 77K1 749
0.06 13 513 1.5 24 187 ★ 2KJ1542 - 7CB13 - 77L1 749
0.07 11 203 1.8 20 052 ★ 2KJ1542 - 7CB13 - 77J1 749
0.08 10 279 1.9 18 398 2KJ1542 - 7CB13 - 77H1 749
K.168-D48-LA71B4
0.05 14 947 0.90 26 754 2KJ1538 - 7CB13 - 77G1 487
0.05 16 493 0.82 29 521 ★ 2KJ1538 - 7CB13 - 77H1 487
0.06 13 194 1.0 23 617 ★ 2KJ1538 - 7CB13 - 77F1 487
0.07 10 795 1.3 19 323 ★ 2KJ1538 - 7CB13 - 77D1 487
0.07 11 902 1.1 21 304 2KJ1538 - 7CB13 - 77E1 487
0.08 9 835 1.4 17 605 2KJ1538 - 7CB13 - 77C1 487
0.09 8 996 1.5 16 102 ★ 2KJ1538 - 7CB13 - 77B1 487
0.10 8 043 1.7 14 397 2KJ1538 - 7CB13 - 77A1 487
K.168-Z48-LA71B4
0.10 8 431 1.6 14 767 2KJ1537 - 7CB13 - 77A2 486
0.11 7 461 1.8 13 068 ★ 2KJ1537 - 7CB13 - 77X1 486
0.12 6 783 2.0 11 880 2KJ1537 - 7CB13 - 77W1 486
K.148-D38-LA71B4
0.08 9 970 0.80 17 845 2KJ1535 - 7CB13 - 77D1 296
0.09 9 039 0.89 16 180 2KJ1535 - 7CB13 - 77C1 296
0.10 8 225 0.97 14 722 2KJ1535 - 7CB13 - 77B1 296
0.11 7 272 1.1 13 017 2KJ1535 - 7CB13 - 77A1 296
K.148-Z38-LA71B4
0.10 7 711 1.0 13 505 2KJ1534 - 7CB13 - 77W1 296
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/6 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.12 K.148-Z38-LA71B4
0.12 6 857 1.2 12 009 2KJ1534 - 7CB13 - 77V1 296
0.13 5 948 1.3 10 418 2KJ1534 - 7CB13 - 77U1 296
0.14 5 558 1.4 9 734 2KJ1534 - 7CB13 - 77T1 296
0.16 4 888 1.6 8 561 2KJ1534 - 7CB13 - 77S1 296
0.19 4 281 1.9 7 498 2KJ1534 - 7CB13 - 77R1 296
K.128-Z38-LA71B4
0.14 5 740 0.82 10 054 ★ 2KJ1531 - 7CB13 - 77U1 201
0.15 5 364 0.88 9 394 2KJ1531 - 7CB13 - 77T1 201
0.17 4 717 1.0 8 262 ★ 2KJ1531 - 7CB13 - 77S1 201 4
0.19 4 131 1.1 7 236 2KJ1531 - 7CB13 - 77R1 201
0.22 3 654 1.3 6 400 ★ 2KJ1531 - 7CB13 - 77Q1 201
0.24 3 312 1.4 5 800 2KJ1531 - 7CB13 - 77P1 201
0.27 2 923 1.6 5 120 ★ 2KJ1531 - 7CB13 - 77N1 201
0.30 2 637 1.8 4 619 2KJ1531 - 7CB13 - 77M1 201
0.33 2 392 2.0 4 189 ★ 2KJ1531 - 7CB13 - 77L1 201
K.108-Z38-LA71B4
0.23 3 445 0.87 6 033 2KJ1527 - 7CB13 - 77P1 134
0.26 3 041 0.99 5 326 2KJ1527 - 7CB13 - 77N1 134
0.29 2 743 1.1 4 804 2KJ1527 - 7CB13 - 77M1 134
0.32 2 488 1.2 4 357 2KJ1527 - 7CB13 - 77L1 134
0.35 2 267 1.3 3 970 2KJ1527 - 7CB13 - 77K1 134
0.39 2 073 1.4 3 631 2KJ1527 - 7CB13 - 77J1 134
0.43 1 854 1.6 3 247 2KJ1527 - 7CB13 - 77H1 134
0.47 1 702 1.8 2 981 2KJ1527 - 7CB13 - 77G1 134
0.52 1 534 2.0 2 687 2KJ1527 - 7CB13 - 77F1 134
K.88-Z28-LA71B4
0.40 1 990 0.83 3 485 ★ 2KJ1523 - 7CB13 - 77X1 76
0.45 1 780 0.93 3 118 2KJ1523 - 7CB13 - 77W1 76
0.51 1 580 1.0 2 768 ★ 2KJ1523 - 7CB13 - 77V1 76
0.58 1 385 1.2 2 426 2KJ1523 - 7CB13 - 77U1 76
0.66 1 218 1.4 2 133 ★ 2KJ1523 - 7CB13 - 77T1 76
0.73 1 100 1.5 1 926 2KJ1523 - 7CB13 - 77S1 76
0.83 959 1.7 1 679 ★ 2KJ1523 - 7CB13 - 77R1 76
0.93 861 1.9 1 508 2KJ1523 - 7CB13 - 77Q1 76
K.68-Z28-LA71B4
0.81 982 0.83 1 720 ★ 2KJ1518 - 7CB13 - 77T1 47
0.90 887 0.92 1 554 2KJ1518 - 7CB13 - 77S1 47
1.0 773 1.1 1 354 ★ 2KJ1518 - 7CB13 - 77R1 47
1.2 694 1.2 1 216 2KJ1518 - 7CB13 - 77Q1 47
1.3 627 1.3 1 098 ★ 2KJ1518 - 7CB13 - 77P1 47
1.4 569 1.4 996 2KJ1518 - 7CB13 - 77N1 47
1.5 517 1.6 906 ★ 2KJ1518 - 7CB13 - 77M1 47
1.7 457 1.8 801 2KJ1518 - 7CB13 - 77L1 47
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/7

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.12 K.68-Z28-LA71B4
1.9 423 1.9 740 ★ 2KJ1518 - 7CB13 - 77K1 47
K.68-LA71MB8
2.6 433 1.9 243.72 2KJ1504 - 7CF13 - 77 N2 P02 44
K.48-Z28-LA71B4
1.6 505 0.89 885 ★ 2KJ1516 - 7CB13 - 77R1 28
1.8 454 0.99 795 2KJ1516 - 7CB13 - 77Q1 28
2.0 409 1.1 717 ★ 2KJ1516 - 7CB13 - 77P1 28
2.2 372 1.2 651 2KJ1516 - 7CB13 - 77N1 28
4 2.4 338 1.3 592 ★ 2KJ1516 - 7CB13 - 77M1 28
2.7 299 1.5 523 2KJ1516 - 7CB13 - 77L1 28
2.9 276 1.6 483 ★ 2KJ1516 - 7CB13 - 77K1 28
3.4 238 1.9 416 2KJ1516 - 7CB13 - 77J1 28
K.48-LA71MB8
3.8 301 1.5 169.53 ★ 2KJ1503 - 7CF13 - 77 J2 P02 25
4.3 268 1.7 150.76 2KJ1503 - 7CF13 - 77 H2 P02 25
K.48-LA71C6
5.1 226 2.0 169.53 ★ 2KJ1503 - 7CC13 - 77J2 P01 25
K.38-Z28-LA71B4
2.7 299 0.84 523 2KJ1514 - 7CB13 - 77L1 24
2.9 276 0.91 483 ★ 2KJ1514 - 7CB13 - 77K1 24
K.38-LA71MB8
4.1 283 0.88 159.04 2KJ1502 - 7CF13 - 77 K2 P02 21
4.6 248 1.0 139.43 ★ 2KJ1502 - 7CF13 - 77 J2 P02 21
K.38-LA71C6
4.8 239 1.0 179.13 ★ 2KJ1502 - 7CC13 - 77L2 P01 21
5.4 212 1.2 159.04 2KJ1502 - 7CC13 - 77K2 P01 21
6.2 186 1.3 139.43 ★ 2KJ1502 - 7CC13 - 77J2 P01 21
6.9 166 1.5 124.78 2KJ1502 - 7CC13 - 77H2 P01 21
K.38-LA71B4
7.8 147 1.7 179.13 ★ 2KJ1502 - 7CB13 - 77L2 21
8.8 130 1.9 159.04 2KJ1502 - 7CB13 - 77K2 21
10.0 114 2.2 139.43 ★ 2KJ1502 - 7CB13 - 77J2 21
B.38-LA71MB8
9.8 117 2.1 65.69 2KJ1501 - 7CF13 - 77 U2 P02 23
B.28-LA71B4
24 47 2.8 57.53 2KJ1500 - 7CB13 - 77D2 11
29 40 3.3 48.51 2KJ1500 - 7CB13 - 77C2 11
32 35 3.7 43.07 2KJ1500 - 7CB13 - 77B2 11
37 31 4.2 37.76 2KJ1500 - 7CB13 - 77A2 11
41 28 4.7 33.79 2KJ1500 - 7CB13 - 77X1 11
47 24 5.3 29.99 2KJ1500 - 7CB13 - 77W1 11
53 22 6.0 26.28 2KJ1500 - 7CB13 - 77V1 11
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/8 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.12 B.28-LA71B4
61 19 6.9 23.11 2KJ1500 - 7CB13 - 777U1 11
67 17 7.6 20.87 2KJ1500 - 7CB13 - 77T1 11
77 15 8.7 18.19 2KJ1500 - 7CB13 - 77S1 11
86 13 9.7 16.34 2KJ1500 - 7CB13 - 77R1 11
95 12 10.8 14.75 2KJ1500 - 7CB13 - 77Q1 11
105 11 11.9 13.38 2KJ1500 - 7CB13 - 77P1 11
115 10 13.0 12.17 2KJ1500 - 7CB13 - 77N1 11
130 8.8 14.8 10.76 2KJ1500 - 7CB13 - 77M1 11
187 6.1 14.7 7.49 2KJ1500 - 7CB13 - 77H1 11 4
0.18 K.188-D68-LA71C4
0.06 20 896 0.96 21 961 2KJ1542 - 7CC13 - 77K1 749
0.06 23 014 0.87 24 187 ★ 2KJ1542 - 7CC13 - 77L1 749
0.07 17 506 1.1 18 398 2KJ1542 - 7CC13 - 77H1 749
0.07 19 080 1.0 20 052 ★ 2KJ1542 - 7CC13 - 77J1 749
0.08 16 129 1.2 16 951 ★ 2KJ1542 - 7CC13 - 77G1 749
0.09 14 648 1.4 15 394 2KJ1542 - 7CC13 - 77F1 749
0.10 13 344 1.5 14 024 ★ 2KJ1542 - 7CC13 - 77E1 749
0.11 12 224 1.6 12 847 2KJ1542 - 7CC13 - 77D1 749
0.12 10 907 1.8 11 463 ★ 2KJ1542 - 7CC13 - 77C1 749
K.168-D48-LA71C4
0.08 15 321 0.88 16 102 ★ 2KJ1538 - 7CC13 - 77B1 487
0.08 16 751 0.81 17 605 2KJ1538 - 7CC13 - 77C1 487
0.10 13 699 0.99 14 397 2KJ1538 - 7CC13 - 77A1 487
K.168-Z48-LA71C4
0.09 14 360 0.94 14 767 2KJ1537 - 7CC13 - 77A2 486
0.10 12 708 1.1 13 068 ★ 2KJ1537 - 7CC13 - 77X1 486
0.12 11 552 1.2 11 880 2KJ1537 - 7CC13 - 77W1 486
0.13 10 379 1.3 10 673 ★ 2KJ1537 - 7CC13 - 77V1 486
0.15 8 896 1.5 9 148 2KJ1537 - 7CC13 - 77U1 486
0.17 8 049 1.7 8 277 ★ 2KJ1537 - 7CC13 - 77T1 486
0.18 7 429 1.8 7 640 2KJ1537 - 7CC13 - 77S1 486
K.148-Z38-LA71C4
0.14 9 466 0.85 9 734 2KJ1534 - 7CC13 - 77T1 296
0.16 8 325 0.96 8 561 2KJ1534 - 7CC13 - 77S1 296
0.18 7 291 1.1 7 498 2KJ1534 - 7CC13 - 77R1 296
0.21 6 449 1.2 6 632 2KJ1534 - 7CC13 - 77Q1 296
0.23 5 844 1.4 6 010 2KJ1534 - 7CC13 - 77P1 296
0.26 5 159 1.6 5 305 2KJ1534 - 7CC13 - 77N1 296
0.29 4 654 1.7 4 786 2KJ1534 - 7CC13 - 77M1 296
0.32 4 221 1.9 4 341 2KJ1534 - 7CC13 - 77L1 296
K.128-Z38-LA71C4
0.24 5 640 0.83 5 800 2KJ1531 - 7CC13 - 77P1 201
0.27 4 979 0.94 5 120 ★ 2KJ1531 - 7CC13 - 77N1 201
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/9

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.18 K.128-Z38-LA71C4
0.30 4 492 1.0 4 619 2KJ1531 - 7CC13 - 77M1 201
0.33 4 073 1.2 4 189 ★ 2KJ1531 - 7CC13 - 77L1 201
0.36 3 712 1.3 3 817 2KJ1531 - 7CC13 - 77K1 201
0.39 3 395 1.4 3 491 ★ 2KJ1531 - 7CC13 - 77J1 201
0.44 3 035 1.5 3 121 2KJ1531 - 7CC13 - 77H1 201
0.48 2 787 1.7 2 866 ★ 2KJ1531 - 7CC13 - 77G1 201
0.53 2 512 1.9 2 583 2KJ1531 - 7CC13 - 77F1 201
K.108-Z38-LA71C4
4 0.38 3 531 0.85 3 631 2KJ1527 - 7CC13 - 77J1 134
0.42 3 157 0.95 3 247 2KJ1527 - 7CC13 - 77H1 134
0.46 2 899 1.0 2 981 2KJ1527 - 7CC13 - 77G1 134
0.51 2 613 1.1 2 687 2KJ1527 - 7CC13 - 77F1 134
0.59 2 247 1.3 2 311 2KJ1527 - 7CC13 - 77E1 134
0.66 2 003 1.5 2 060 2KJ1527 - 7CC13 - 77D1 134
0.72 1 840 1.6 1 892 2KJ1527 - 7CC13 - 77C1 134
0.8 1 658 1.8 1 705 2KJ1527 - 7CC13 - 77B1 134
K.88-Z28-LA71C4
0.64 2 074 0.80 2 133 ★ 2KJ1523 - 7CC13 - 77T1 76
0.71 1 873 0.88 1 926 2KJ1523 - 7CC13 - 77S1 76
0.82 1 633 1.0 1 679 ★ 2KJ1523 - 7CC13 - 77R1 76
0.91 1 466 1.1 1 508 2KJ1523 - 7CC13 - 77Q1 76
1.0 1 323 1.2 1 361 ★ 2KJ1523 - 7CC13 - 77P1 76
1.1 1 200 1.4 1 234 2KJ1523 - 7CC13 - 77N1 76
1.2 1 092 1.5 1 123 ★ 2KJ1523 - 7CC13 - 77M1 76
1.4 966 1.7 993 2KJ1523 - 7CC13 - 77L1 76
1.5 892 1.9 917 ★ 2KJ1523 - 7CC13 - 77K1 76
K.88-LA80S8
2.2 771 2.0 302.68 ★ 2KJ1505 - 7DB13 - 77M2 P02 78
K.68-Z28-LA71C4
1.4 969 0.85 996 2KJ1518 - 7CC13 - 77N1 47
1.5 881 0.93 906 ★ 2KJ1518 - 7CC13 - 77M1 47
1.7 779 1.1 801 2KJ1518 - 7CC13 - 77L1 47
1.9 720 1.1 740 ★ 2KJ1518 - 7CC13 - 77K1 47
2.2 619 1.3 637 2KJ1518 - 7CC13 - 77J1 47
2.4 563 1.5 579 ★ 2KJ1518 - 7CC13 - 77H1 47
K.68-LA80S8
2.8 621 1.3 243.72 2KJ1504 - 7DB13 - 77N2 P02 48
3.1 549 1.5 215.68 ★ 2KJ1504 - 7DB13 - 77M2 P02 48
K.68-LA71S6
3.5 493 1.7 243.72 2KJ1504 - 7CD13 - 77N2 P01 44
3.9 436 1.9 215.68 ★ 2KJ1504 - 7CD13 - 77M2 P01 44
K.48-Z28-LA71C4
2.6 509 0.88 523 2KJ1516 - 7CC13 - 77L1 28
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/10 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.18 K.48-Z28-LA71C4
2.8 470 0.96 483 ★ 2KJ1516 - 7CC13 - 77K1 28
3.3 405 1.1 416 2KJ1516 - 7CC13 - 77J1 28
K.48-LA80S8
4.0 432 1.0 169.53 ★ 2KJ1503 - 7DB13 - 77J2 P02 29
4.5 384 1.2 150.76 2KJ1503 - 7DB13 - 77H2 P02 29
K.48-LA71S6
5.0 343 1.3 169.53 ★ 2KJ1503 - 7CD13 - 77J2 P01 25
5.6 305 1.5 150.76 2KJ1503 - 7CD13 - 77H2 P01 25
6.5 264 1.7 130.78 ★ 2KJ1503 - 7CD13 - 77G2 P01 25 4
7.0 247 1.8 122.19 2KJ1503 - 7CD13 - 77F2 P01 25
K.48-LA71C4
8.1 213 2.1 169.53 ★ 2KJ1503 - 7CC13 - 77J2 25
K.38-LA71S6
6.1 282 0.89 139.43 ★ 2KJ1502 - 7CD13 - 77J2 P01 21
6.8 252 0.99 124.78 2KJ1502 - 7CD13 - 77H2 P01 21
K.38-LA71C4
7.6 225 1.1 179.13 ★ 2KJ1502 - 7CC13 - 77L2 21
8.6 200 1.3 159.04 2KJ1502 - 7CC13 - 77K2 21
9.8 175 1.4 139.43 ★ 2KJ1502 - 7CC13 - 77J2 21
11.0 157 1.6 124.78 2KJ1502 - 7CC13 - 77H2 21
12.4 139 1.8 110.75 ★ 2KJ1502 - 7CC13 - 77G2 21
14.1 122 2.1 97.05 2KJ1502 - 7CC13 - 77F2 21
16.1 107 2.3 85.33 ★ 2KJ1502 - 7CC13 - 77E2 21
B.38-LA80S8
11.8 145 1.7 57.04 2KJ1501 - 7DB13 - 77T2 P02 27
B.38-LA71S6
12.9 133 1.9 65.69 2KJ1501 - 7CD13 - 77U2 P01 23
14.9 115 2.2 57.04 2KJ1501 - 7CD13 - 77T2 P01 23
B.28-LA71C4
24 72 1.8 57.53 2KJ1500 - 7CC13 - 77D2 11
28 61 2.1 48.51 2KJ1500 - 7CC13 - 77C2 11
32 54 2.4 43.07 2KJ1500 - 7CC13 - 77B2 11
36 47 2.7 37.76 2KJ1500 - 7CC13 - 77A2 11
40 42 3.1 33.79 2KJ1500 - 7CC13 - 77X1 11
46 38 3.5 29.99 2KJ1500 - 7CC13 - 77W1 11
52 33 3.9 26.28 2KJ1500 - 7CC13 - 77V1 11
59 29 4.5 23.11 2KJ1500 - 7CC13 - 77U1 11
66 26 5.0 20.87 2KJ1500 - 7CC13 - 77T1 11
75 23 5.7 18.19 2KJ1500 - 7CC13 - 77S1 11
84 20 6.3 16.34 2KJ1500 - 7CC13 - 77R1 11
93 18 7.0 14.75 2KJ1500 - 7CC13 - 77Q1 11
102 17 7.7 13.38 2KJ1500 - 7CC13 - 77P1 11
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/11

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.18 B.28-LA71C4
113 15 8.5 12.17 2KJ1500 - 7CC13 - 77N1 11
127 14 9.6 10.76 2KJ1500 - 7CC13 - 77M1 11
138 12 10.3 9.94 2KJ1500 - 7CC13 - 77L1 11
160 11 11.3 8.56 2KJ1500 - 7CC13 - 77K1 11
176 9.8 12.0 7.78 2KJ1500 - 7CC13 - 77J1 11
183 9.4 9.6 7.49 2KJ1500 - 7CC13 - 77H1 11
203 8.5 10.6 6.76 2KJ1500 - 7CC13 - 77G1 11
223 7.7 11.7 6.13 2KJ1500 - 7CC13 - 77F1 11
4 246 7.0 12.9 5.58 2KJ1500 - 7CC13 - 77E1 11
277 6.2 14.5 4.94 2KJ1500 - 7CC13 - 77D1 11
0.25 K.188-D68-LA71S4
0.08 24 007 0.83 16 951 ★ 2KJ1542 - 7CD13 - 77G1 749
0.09 21 801 0.92 15 394 2KJ1542 - 7CD13 - 77F1 749
0.10 18 194 1.1 12 847 2KJ1542 - 7CD13 - 77D1 749
0.10 19 861 1.0 14 024 ★ 2KJ1542 - 7CD13 - 77E1 749
0.12 16 234 1.2 11 463 ★ 2KJ1542 - 7CD13 - 77C1 749
K.188-Z68-LA71S4
0.15 13 317 1.5 9 201 ★ 2KJ1541 - 7CD13 - 77X1 747
0.17 11 647 1.7 8 047 2KJ1541 - 7CD13 - 77W1 747
0.19 10 456 1.9 7 224 ★ 2KJ1541 - 7CD13 - 77V1 747
K.168-Z48-LA71S4
0.13 15 448 0.87 10 673 ★ 2KJ1537 - 7CD13 - 77V1 486
0.15 13 240 1.0 9 148 2KJ1537 - 7CD13 - 77U1 486
0.16 11 980 1.1 8 277 ★ 2KJ1537 - 7CD13 - 77T1 486
0.18 11 058 1.2 7 640 2KJ1537 - 7CD13 - 77S1 486
0.20 9 615 1.4 6 643 ★ 2KJ1537 - 7CD13 - 77R1 486
0.22 8 730 1.5 6 032 2KJ1537 - 7CD13 - 77Q1 486
0.24 7 971 1.7 5 507 ★ 2KJ1537 - 7CD13 - 77P1 486
0.27 7 313 1.8 5 053 2KJ1537 - 7CD13 - 77N1 486
0.29 6 739 2.0 4 656 ★ 2KJ1537 - 7CD13 - 77M1 486
K.148-Z38-LA71S4
0.20 9 599 0.83 6 632 2KJ1534 - 7CD13 - 77Q1 296
0.22 8 699 0.92 6 010 2KJ1534 - 7CD13 - 77P1 296
0.25 7 678 1.0 5 305 2KJ1534 - 7CD13 - 77N1 296
0.28 6 927 1.2 4 786 2KJ1534 - 7CD13 - 77M1 296
0.31 6 283 1.3 4 341 2KJ1534 - 7CD13 - 77L1 296
0.34 5 724 1.4 3 955 2KJ1534 - 7CD13 - 77K1 296
0.37 5 235 1.5 3 617 2KJ1534 - 7CD13 - 77J1 296
0.42 4 681 1.7 3 234 2KJ1534 - 7CD13 - 77H1 296
0.46 4 299 1.9 2 970 2KJ1534 - 7CD13 - 77G1 296
K.128-Z38-LA71S4
0.35 5 525 0.85 3 817 2KJ1531 - 7CD13 - 77K1 201
0.39 5 053 0.93 3 491 ★ 2KJ1531 - 7CD13 - 77J1 201
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/12 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.25 K.128-Z38-LA71S4
0.43 4 517 1.0 3 121 2KJ1531 - 7CD13 - 77H1 201
0.47 4 148 1.1 2 866 ★ 2KJ1531 - 7CD13 - 77G1 201
0.52 3 739 1.3 2 583 2KJ1531 - 7CD13 - 77F1 201
0.61 3 215 1.5 2 221 ★ 2KJ1531 - 7CD13 - 77E1 201
0.68 2 867 1.6 1 981 2KJ1531 - 7CD13 - 77D1 201
0.74 2 633 1.8 1 819 ★ 2KJ1531 - 7CD13 - 77C1 201
0.82 2 372 2.0 1 639 2KJ1531 - 7CD13 - 77B1 201
K.108-Z38-LA71S4
0.58 3 345 0.90 2 311 2KJ1527 - 7CD13 - 77E1 134 4
0.66 2 982 1.0 2 060 2KJ1527 - 7CD13 - 77D1 134
0.71 2 738 1.1 1 892 2KJ1527 - 7CD13 - 77C1 134
0.79 2 468 1.2 1 705 2KJ1527 - 7CD13 - 77B1 134
0.92 2 122 1.4 1 466 2KJ1527 - 7CD13 - 77A1 134
K.108-Z48-LA71S4
1.0 1 944 1.5 1 343 ★ 2KJ1530 - 7CD13 - 77P1 143
1.1 1 785 1.7 1 233 2KJ1530 - 7CD13 - 77N1 143
1.2 1 644 1.8 1 136 ★ 2KJ1530 - 7CD13 - 77M1 143
1.3 1 492 2.0 1 031 2KJ1530 - 7CD13 - 77L1 143
K.88-Z28-LA71S4
0.99 1 970 0.84 1 361 ★ 2KJ1523 - 7CD13 - 77P1 76
1.1 1 786 0.92 1 234 2KJ1523 - 7CD13 - 77N1 76
1.2 1 625 1.0 1 123 ★ 2KJ1523 - 7CD13 - 77M1 76
1.4 1 437 1.1 993 2KJ1523 - 7CD13 - 77L1 76
1.5 1 327 1.2 917 ★ 2KJ1523 - 7CD13 - 77K1 76
1.7 1 142 1.4 789 2KJ1523 - 7CD13 - 77J1 76
1.9 1 039 1.6 718 ★ 2KJ1523 - 7CD13 - 77H1 76
2.1 944 1.7 652 ★ 2KJ1523 - 7CD13 - 77G1 76
K.88-LA80M8
2.3 1 055 1.5 302.68 ★ 2KJ1505 - 7DC13 - 77M2 P02 78
2.5 951 1.7 272.95 2KJ1505 - 7DC13 - 77L2 P02 78
K.88-LA71M6
2.8 840 1.8 302.68 ★ 2KJ1505 - 7CE13 - 77 M2 P01 74
K.68-Z28-LA71S4
2.1 922 0.89 637 2KJ1518 - 7CD13 - 77J1 47
2.3 838 0.98 579 ★ 2KJ1518 - 7CD13 - 77H1 47
K.68-LA80M8
2.8 849 0.97 243.72 2KJ1504 - 7DC13 - 77N2 P02 48
3.2 752 1.1 215.68 ★ 2KJ1504 - 7DC13 - 77M2 P02 48
K.68-LA71M6
3.5 677 1.2 243.72 2KJ1504 - 7CE13 - 77 N2 P01 44
4.0 599 1.4 215.68 ★ 2KJ1504 - 7CE13 - 77 M2 P01 44
4.4 544 1.5 196.07 2KJ1504 - 7CE13 - 77 L2 P01 44
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/13

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.25 K.68-LA71M6
4.9 489 1.7 176.14 ★ 2KJ1504 - 7CE13 - 77 K2 P01 44
K.68-LA71S4
5.5 431 1.9 243.72 2KJ1504 - 7CD13 - 77N2 44
6.3 381 2.1 215.68 ★ 2KJ1504 - 7CD13 - 77M2 44
K.48-LA80M8
4.5 525 0.86 150.76 2KJ1503 - 7DC13 - 77H2 P02 29
K.48-LA71M6
5.1 471 0.96 169.53 ★ 2KJ1503 - 7CE13 - 77 J2 P01 25
4 5.7 419 1.1 150.76 2KJ1503 - 7CE13 - 77 H2 P01 25
6.6 363 1.2 130.78 ★ 2KJ1503 - 7CE13 - 77 G2 P01 25
7.0 339 1.3 122.19 2KJ1503 - 7CE13 - 77 F2 P01 25
K.48-LA71S4
8.0 300 1.5 169.53 ★ 2KJ1503 - 7CD13 - 77J2 25
9.0 267 1.7 150.76 2KJ1503 - 7CD13 - 77H2 25
10.3 231 1.9 130.78 ★ 2KJ1503 - 7CD13 - 77G2 25
11.0 216 2.1 122.19 2KJ1503 - 7CD13 - 77F2 25
K.38-LA71S4
8.5 281 0.89 159.04 2KJ1502 - 7CD13 - 77K2 21
9.7 247 1.0 139.43 ★ 2KJ1502 - 7CD13 - 77J2 21
10.8 221 1.1 124.78 2KJ1502 - 7CD13 - 77H2 21
12.2 196 1.3 110.75 ★ 2KJ1502 - 7CD13 - 77G2 21
13.9 172 1.5 97.05 2KJ1502 - 7CD13 - 77F2 21
15.8 151 1.7 85.33 ★ 2KJ1502 - 7CD13 - 77E2 21
17.5 136 1.8 77.09 2KJ1502 - 7CD13 - 77D2 21
20 119 2.1 67.18 ★ 2KJ1502 - 7CD13 - 77C2 21
22 107 2.3 60.33 2KJ1502 - 7CD13 - 77B2 21
B.38-LA80M8
12 199 1.3 57.04 2KJ1501 - 7DC13 - 77T2 P02 27
B.38-LA71M6
13.1 182 1.4 65.69 2KJ1501 - 7CE13 - 77 U2 P01 23
15.1 158 1.6 57.04 2KJ1501 - 7CE13 - 77 T2 P01 23
17.0 141 1.8 50.72 2KJ1501 - 7CE13 - 77 S2 P01 23
19.5 122 2.0 44 2KJ1501 - 7CE13 - 77 R2 P01 23
B.38-LA71S4
21 116 2.2 65.69 2KJ1501 - 7CD13 - 77U2 23
B.28-LA71S4
24 102 1.3 57.53 2KJ1500 - 7CD13 - 77D2 11
28 86 1.5 48.51 2KJ1500 - 7CD13 - 77C2 11
31 76 1.7 43.07 2KJ1500 - 7CD13 - 77B2 11
36 67 1.9 37.76 2KJ1500 - 7CD13 - 77A2 11
40 60 2.2 33.79 2KJ1500 - 7CD13 - 77X1 11
45 53 2.5 29.99 2KJ1500 - 7CD13 - 77W1 11
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/14 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.25 B.28-LA71S4
51 46 2.8 26.28 2KJ1500 - 7CD13 - 77V1 11
58 41 3.2 23.11 2KJ1500 - 7CD13 - 77U1 11
65 37 3.5 20.87 2KJ1500 - 7CD13 - 77T1 11
74 32 4.0 18.19 2KJ1500 - 7CD13 - 77S1 11
83 29 4.5 16.34 2KJ1500 - 7CD13 - 77R1 11
92 26 5.0 14.75 2KJ1500 - 7CD13 - 77Q1 11
101 24 5.5 13.38 2KJ1500 - 7CD13 - 77P1 11
111 22 6.0 12.17 2KJ1500 - 7CD13 - 77N1 11
125 19 6.8 10.76 2KJ1500 - 7CD13 - 77M1 11 4
136 18 7.3 9.94 2KJ1500 - 7CD13 - 77L1 11
158 15 8.0 8.56 2KJ1500 - 7CD13 - 77K1 11
174 14 8.5 7.78 2KJ1500 - 7CD13 - 77J1 11
180 13 6.8 7.49 2KJ1500 - 7CD13 - 77H1 11
200 12 7.5 6.76 2KJ1500 - 7CD13 - 77G1 11
220 11 8.3 6.13 2KJ1500 - 7CD13 - 77F1 11
242 9.9 9.1 5.58 2KJ1500 - 7CD13 - 77E1 11
273 8.7 10.3 4.94 2KJ1500 - 7CD13 - 77D1 11
296 8.1 10.8 4.56 2KJ1500 - 7CD13 - 77C1 11
344 6.9 11.8 3.92 2KJ1500 - 7CD13 - 77B1 11
378 6.3 12.5 3.57 2KJ1500 - 7CD13 - 77A1 11
0.37 K.188-D68-LA71M4
0.12 24 723 0.81 11 463 ★ 2KJ1542 - 7CE13 - 77 C1 749
K.188-Z68-LA71M4
0.15 20 281 0.99 9 201 ★ 2KJ1541 - 7CE13 - 77 X1 747
0.17 17 737 1.1 8 047 2KJ1541 - 7CE13 - 77 W1 747
0.19 15 923 1.3 7 224 ★ 2KJ1541 - 7CE13 - 77 V1 747
0.21 14 543 1.4 6 598 2KJ1541 - 7CE13 - 77 U1 747
0.23 12 905 1.5 5 855 ★ 2KJ1541 - 7CE13 - 77 T1 747
0.25 11 914 1.7 5 405 2KJ1541 - 7CE13 - 77 S1 747
0.28 10 776 1.9 4 889 ★ 2KJ1541 - 7CE13 - 77 R1 747
0.30 9 923 2.0 4 502 2KJ1541 - 7CE13 - 77 Q1 747
K.168-Z48-LA71M4
0.18 16 840 0.80 7 640 2KJ1537 - 7CE13 - 77 S1 486
0.21 14 642 0.92 6 643 ★ 2KJ1537 - 7CE13 - 77 R1 486
0.23 13 296 1.0 6 032 2KJ1537 - 7CE13 - 77 Q1 486
0.25 12 138 1.1 5 507 ★ 2KJ1537 - 7CE13 - 77 P1 486
0.27 11 138 1.2 5 053 2KJ1537 - 7CE13 - 77 N1 486
0.29 10 263 1.3 4 656 ★ 2KJ1537 - 7CE13 - 77 M1 486
0.32 9 319 1.4 4 228 2KJ1537 - 7CE13 - 77 L1 486
0.36 8 490 1.6 3 852 ★ 2KJ1537 - 7CE13 - 77 K1 486
0.39 7 776 1.7 3 528 2KJ1537 - 7CE13 - 77 J1 486
0.44 6 939 1.9 3 148 ★ 2KJ1537 - 7CE13 - 77 H1 486
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/15

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.37 K.148-Z38-LA71M4
0.32 9 568 0.84 4 341 2KJ1534 - 7CE13 - 77 L1 296
0.35 8 717 0.92 3 955 2KJ1534 - 7CE13 - 77 K1 296
0.38 7 972 1.0 3 617 2KJ1534 - 7CE13 - 77 J1 296
0.42 7 128 1.1 3 234 2KJ1534 - 7CE13 - 77 H1 296
0.46 6 546 1.2 2 970 2KJ1534 - 7CE13 - 77 G1 296
0.51 5 901 1.4 2 677 2KJ1534 - 7CE13 - 77 F1 296
0.60 5 074 1.6 2 302 2KJ1534 - 7CE13 - 77 E1 296
0.67 4 525 1.8 2 053 2KJ1534 - 7CE13 - 77 D1 296
4 0.73 4 155 1.9 1 885 2KJ1534 - 7CE13 - 77 C1 296
K.128-Z38-LA71M4
0.53 5 693 0.83 2 583 2KJ1531 - 7CE13 - 77 F1 201
0.62 4 895 0.96 2 221 ★ 2KJ1531 - 7CE13 - 77 E1 201
0.69 4 366 1.1 1 981 2KJ1531 - 7CE13 - 77 D1 201
0.75 4 009 1.2 1 819 ★ 2KJ1531 - 7CE13 - 77 C1 201
0.84 3 613 1.3 1 639 2KJ1531 - 7CE13 - 77 B1 201
0.97 3 108 1.5 1 410 ★ 2KJ1531 - 7CE13 - 77 A1 201
K.128-Z48-LA71M4
0.98 3 086 1.5 1 400 2KJ1533 - 7CE13 - 77 P1 210
1.1 2 830 1.7 1 284 2KJ1533 - 7CE13 - 77 N1 210
1.2 2 608 1.8 1 183 2KJ1533 - 7CE13 - 77 M1 210
1.3 2 367 2.0 1 074 2KJ1533 - 7CE13 - 77 L1 210
K.108-Z38-LA71M4
0.80 3 758 0.80 1 705 2KJ1527 - 7CE13 - 77 B1 134
0.94 3 231 0.93 1 466 2KJ1527 - 7CE13 - 77 A1 134
K.108-Z48-LA71M4
1.0 2 960 1.0 1 343 ★ 2KJ1530 - 7CE13 - 77 P1 143
1.1 2 718 1.1 1 233 2KJ1530 - 7CE13 - 77 N1 143
1.2 2 504 1.2 1 136 ★ 2KJ1530 - 7CE13 - 77 M1 143
1.3 2 272 1.3 1 031 2KJ1530 - 7CE13 - 77 L1 143
1.5 2 072 1.4 940 ★ 2KJ1530 - 7CE13 - 77 K1 143
1.6 1 898 1.6 861 2KJ1530 - 7CE13 - 77 J1 143
1.8 1 693 1.8 768 ★ 2KJ1530 - 7CE13 - 77 H1 143
K.108-LA90SA8
2.2 1 608 1.8 307.24 2KJ1506 - 7EB13 - 77 K2 P02 135
2.4 1 456 1.9 278.1 ★ 2KJ1506 - 7EB13 - 77 J2 P02 135
K.88-Z28-LA71M4
1.5 2 021 0.82 917 ★ 2KJ1523 - 7CE13 - 77 K1 76
1.7 1 739 0.95 789 2KJ1523 - 7CE13 - 77 J1 76
1.9 1 583 1.0 718 ★ 2KJ1523 - 7CE13 - 77 H1 76
2.1 1 437 1.1 652 ★ 2KJ1523 - 7CE13 - 77 G1 76
K.88-LA90SA8
2.2 1 584 0.97 302.68 ★ 2KJ1505 - 7EB13 - 77 M2 P02 81
2.5 1 429 1.2 272.95 2KJ1505 - 7EB13 - 77 L2 P02 81
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/16 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.37 K.88-LA90SA8
2.7 1 288 1.3 246.13 ★ 2KJ1505 - 7EB13 - 77 K2 P02 81
K.88-LA80S6
3.0 1 163 1.3 302.68 ★ 2KJ1505 - 7DB13 - 77M2 P01 78
3.4 1 048 1.6 272.95 2KJ1505 - 7DB13 - 77L2 P01 78
3.7 945 1.7 246.13 ★ 2KJ1505 - 7DB13 - 77K2 P01 78
4.3 827 2.0 215.25 2KJ1505 - 7DB13 - 77J2 P01 78
K.88-LA71M4
4.5 781 2.0 302.68 ★ 2KJ1505 - 7CE13 - 77 M2 74
K.68-LA80S6 4
3.8 936 0.88 243.72 2KJ1504 - 7DB13 - 77N2 P01 48
4.3 828 0.99 215.68 ★ 2KJ1504 - 7DB13 - 77M2 P01 48
4.7 753 1.1 196.07 2KJ1504 - 7DB13 - 77L2 P01 48
5.2 677 1.2 176.14 ★ 2KJ1504 - 7DB13 - 77K2 P01 48
K.68-LA71M4
5.6 629 1.3 243.72 2KJ1504 - 7CE13 - 77 N2 44
6.4 556 1.5 215.68 ★ 2KJ1504 - 7CE13 - 77 M2 44
7.0 506 1.6 196.07 2KJ1504 - 7CE13 - 77 L2 44
7.8 454 1.8 176.14 ★ 2KJ1504 - 7CE13 - 77 K2 44
9.1 389 2.1 150.98 2KJ1504 - 7CE13 - 77 J2 44
K.48-LA80S6
7.0 502 0.90 130.78 ★ 2KJ1503 - 7DB13 - 77G2 P01 29
7.5 469 0.96 122.19 2KJ1503 - 7DB13 - 77F2 P01 29
K.48-LA71M4
8.1 437 1.0 169.53 ★ 2KJ1503 - 7CE13 - 77 J2 25
9.1 389 1.2 150.76 2KJ1503 - 7CE13 - 77 H2 25
10.5 337 1.3 130.78 ★ 2KJ1503 - 7CE13 - 77 G2 25
11.2 315 1.4 122.19 2KJ1503 - 7CE13 - 77 F2 25
12.7 277 1.6 107.47 ★ 2KJ1503 - 7CE13 - 77 E2 25
14.6 243 1.9 94.12 2KJ1503 - 7CE13 - 77 D2 25
16.5 215 2.1 83.25 ★ 2KJ1503 - 7CE13 - 77 C2 25
18.2 195 2.3 75.45 2KJ1503 - 7CE13 - 77 B2 25
K.38-LA71M4
12.4 286 0.88 110.75 ★ 2KJ1502 - 7CE13 - 77 G2 21
14.1 250 1.0 97.05 2KJ1502 - 7CE13 - 77 F2 21
16.1 220 1.1 85.33 ★ 2KJ1502 - 7CE13 - 77 E2 21
17.8 199 1.3 77.09 2KJ1502 - 7CE13 - 77 D2 21
20 173 1.4 67.18 ★ 2KJ1502 - 7CE13 - 77 C2 21
23 156 1.6 60.33 2KJ1502 - 7CE13 - 77 B2 21
25 140 1.8 54.47 ★ 2KJ1502 - 7CE13 - 77 A2 21
28 127 2.0 49.38 2KJ1502 - 7CE13 - 77 X1 21
30 116 2.2 44.94 ★ 2KJ1502 - 7CE13 - 77 W1 21
34 102 2.4 39.73 2KJ1502 - 7CE13 - 77 V1 21
37 95 2.6 36.69 ★ 2KJ1502 - 7CE13 - 77 U1 21
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/17

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.37 B.38-LA80S6
16.1 219 1.1 57.04 2KJ1501 - 7DB13 - 77T2 P01 27
18.1 195 1.3 50.72 2KJ1501 - 7DB13 - 77S2 P01 27
B.38-LA71M4
21 169 1.5 65.69 2KJ1501 - 7CE13 - 77 U2 23
24 147 1.7 57.04 2KJ1501 - 7CE13 - 77 T2 23
27 131 1.9 50.72 2KJ1501 - 7CE13 - 77 S2 23
31 113 2.2 44 2KJ1501 - 7CE13 - 77 R2 23
33 106 2.4 41.11 2KJ1501 - 7CE13 - 77 Q2 23
4 B.28-LA71M4
24 148 0.88 57.53 2KJ1500 - 7CE13 - 77 D2 11
28 125 1.0 48.51 2KJ1500 - 7CE13 - 77 C2 11
32 111 1.2 43.07 2KJ1500 - 7CE13 - 77 B2 11
36 97 1.3 37.76 2KJ1500 - 7CE13 - 77 A2 11
40 87 1.5 33.79 2KJ1500 - 7CE13 - 77 X1 11
46 77 1.7 29.99 2KJ1500 - 7CE13 - 77 W1 11
52 68 1.9 26.28 2KJ1500 - 7CE13 - 77 V1 11
59 60 2.2 23.11 2KJ1500 - 7CE13 - 77 U1 11
66 54 2.4 20.87 2KJ1500 - 7CE13 - 77 T1 11
75 47 2.8 18.19 2KJ1500 - 7CE13 - 77 S1 11
84 42 3.1 16.34 2KJ1500 - 7CE13 - 77 R1 11
93 38 3.4 14.75 2KJ1500 - 7CE13 - 77 Q1 11
0.55 K.188-Z68-LA71ZMP4
0.19 24 353 0.82 7 224 ★ 2KJ1541 - 7CG13 - 77V1 747
0.21 22 242 0.9 6 598 2KJ1541 - 7CG13 - 77U1 747
0.23 19 738 1.0 5 855 ★ 2KJ1541 - 7CG13 - 77T1 747
0.25 18 221 1.1 5 405 2KJ1541 - 7CG13 - 77S1 747
0.28 16 481 1.2 4 889 ★ 2KJ1541 - 7CG13 - 77R1 747
0.30 15 177 1.3 4 502 2KJ1541 - 7CG13 - 77Q1 747
0.33 14 034 1.4 4 163 ★ 2KJ1541 - 7CG13 - 77P1 747
0.35 13 029 1.5 3 865 2KJ1541 - 7CG13 - 77N1 747
0.40 11 495 1.7 3 410 ★ 2KJ1541 - 7CG13 - 77M1 747
0.44 10 612 1.9 3 148 2KJ1541 - 7CG13 - 77L1 747
K.168-Z48-LA71ZMP4
0.29 15 696 0.86 4 656 ★ 2KJ1537 - 7CG13 - 77M1 486
0.32 14 253 0.95 4 228 2KJ1537 - 7CG13 - 77L1 486
0.36 12 985 1.0 3 852 ★ 2KJ1537 - 7CG13 - 77K1 486
0.39 11 893 1.1 3 528 2KJ1537 - 7CG13 - 77J1 486
0.44 10 612 1.3 3 148 ★ 2KJ1537 - 7CG13 - 77H1 486
0.70 6 590 2.0 1 955 ★ 2KJ1537 - 7CG13 - 77D1 486
K.148-Z38-LA71ZMP4
0.46 10 012 0.80 2 970 2KJ1534 - 7CG13 - 77G1 296
0.51 9 024 0.89 2 677 2KJ1534 - 7CG13 - 77F1 296
0.60 7 760 1.0 2 302 2KJ1534 - 7CG13 - 77E1 296
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/18 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.55 K.148-Z38-LA71ZMP4
0.67 6 921 1.2 2 053 2KJ1534 - 7CG13 - 77D1 296
0.73 6 354 1.3 1 885 2KJ1534 - 7CG13 - 77C1 296
0.81 5 727 1.4 1 699 2KJ1534 - 7CG13 - 77B1 296
0.94 4 925 1.6 1 461 2KJ1534 - 7CG13 - 77A1 296
K.148-Z68-LA71ZMP4
0.98 4 693 1.7 1 392 2KJ1536 - 7CG13 - 77L1 322
1.1 4 204 1.9 1 247 ★ 2KJ1536 - 7CG13 - 77K1 322
K.128-Z38-LA71ZMP4
0.84 5 525 0.85 1 639 2KJ1531 - 7CG13 - 77B1 201 4
0.97 4 753 0.99 1 410 ★ 2KJ1531 - 7CG13 - 77A1 201
K.128-Z48-LA71ZMP4
0.98 4 720 1.0 1 400 2KJ1533 - 7CG13 - 77P1 210
1.1 4 328 1.1 1 284 2KJ1533 - 7CG13 - 77N1 210
1.2 3 988 1.2 1 183 2KJ1533 - 7CG13 - 77M1 210
1.3 3 621 1.3 1 074 2KJ1533 - 7CG13 - 77L1 210
1.4 3 300 1.4 979 2KJ1533 - 7CG13 - 77K1 210
1.5 3 024 1.6 897 2KJ1533 - 7CG13 - 77J1 210
1.7 2 697 1.7 800 2KJ1533 - 7CG13 - 77H1 210
K.128-LA90LA8
2.3 2 298 2.0 295.38 ★ 2KJ1507 - 7EE13 - 7 7L2 P02 209
K.108-Z48-LA71ZMP4
1.3 3 476 0.86 1 031 2KJ1530 - 7CG13 - 77L1 143
1.5 3 169 0.95 940 ★ 2KJ1530 - 7CG13 - 77K1 143
1.6 2 903 1.0 861 2KJ1530 - 7CG13 - 77J1 143
1.8 2 589 1.2 768 ★ 2KJ1530 - 7CG13 - 77H1 143
K.108-LA90LA8
2.2 2 391 1.2 307.24 2KJ1506 - 7EE13 - 7 7K2 P02 138
2.4 2 164 1.3 278.1 ★ 2KJ1506 - 7EE13 - 7 7J2 P02 138
2.8 1 895 1.6 243.47 2KJ1506 - 7EE13 - 7 7H2 P02 138
K.108-LA80M6
3.0 1 773 1.6 307.24 2KJ1506 - 7DC13 - 77K2 P01 132
3.3 1 605 1.8 278.1 ★ 2KJ1506 - 7DC13 - 77J2 P01 132
K.88-LA90LA8
2.7 1 915 0.86 246.13 ★ 2KJ1505 - 7EE13 - 7 7K2 P02 84
K.88-LA80M6
3.0 1 747 0.88 302.68 ★ 2KJ1505 - 7DC13 - 77M2 78
3.3 1 575 1.0 272.95 2KJ1505 - 7DC13 - 77L2 78
3.7 1 421 1.2 246.13 ★ 2KJ1505 - 7DC13 - 77K2 78
4.2 1 242 1.3 215.25 2KJ1505 - 7DC13 - 77J2 78
K.88-LA71ZMP4
4.5 1 160 1.3 302.68 ★ 2KJ1505 - 7CG13 - 77M2 74
5.0 1 046 1.6 272.95 2KJ1505 - 7CG13 - 77L2 74
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/19

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.55 K.88-LA71ZMP4
5.6 944 1.7 246.13 ★ 2KJ1505 - 7CG13 - 77K2 74
6.4 825 2.0 215.25 2KJ1505 - 7CG13 - 77J2 74
K.68-LA80M6
5.2 1 017 0.81 176.14 ★ 2KJ1504 - 7DC13 - 77K2 P01 48
K.68-LA71ZMP4
5.6 934 0.88 243.72 2KJ1504 - 7CG13 - 77N2 44
6.4 827 0.99 215.68 ★ 2KJ1504 - 7CG13 - 77M2 44
7.0 752 1.1 196.07 2KJ1504 - 7CG13 - 77L2 44
4 7.8 675 1.2 176.14 ★ 2KJ1504 - 7CG13 - 77K2 44
9.1 579 1.4 150.98 2KJ1504 - 7CG13 - 77J2 44
10.0 524 1.6 136.6 ★ 2KJ1504 - 7CG13 - 77H2 44
10.9 483 1.7 126.09 2KJ1504 - 7CG13 - 77G2 44
12.5 420 2.0 109.64 ★ 2KJ1504 - 7CG13 - 77F2 44
13.8 382 2.1 99.55 2KJ1504 - 7CG13 - 77E2 44
K.48-LA71ZMP4
10.5 501 0.90 130.78 ★ 2KJ1503 - 7CG13 - 77G2 25
11.2 468 0.96 122.19 2KJ1503 - 7CG13 - 77F2 25
12.7 412 1.1 107.47 ★ 2KJ1503 - 7CG13 - 77E2 25
14.6 361 1.2 94.12 2KJ1503 - 7CG13 - 77D2 25
16.5 319 1.4 83.25 ★ 2KJ1503 - 7CG13 - 77C2 25
18.2 289 1.6 75.45 2KJ1503 - 7CG13 - 77B2 25
21 255 1.8 66.6 ★ 2KJ1503 - 7CG13 - 77A2 25
23 230 2.0 60.08 2KJ1503 - 7CG13 - 77X1 25
25 209 2.2 54.49 ★ 2KJ1503 - 7CG13 - 77W1 25
28 190 2.4 49.65 2KJ1503 - 7CG13 - 77V1 25
K.38-LA71ZMP4
17.8 296 0.85 77.09 2KJ1502 - 7CG13 - 77D2 21
20 258 0.97 67.18 ★ 2KJ1502 - 7CG13 - 77C2 21
23 231 1.1 60.33 2KJ1502 - 7CG13 - 77B2 21
25 209 1.2 54.47 ★ 2KJ1502 - 7CG13 - 77A2 21
28 189 1.3 49.38 2KJ1502 - 7CG13 - 77X1 21
30 172 1.5 44.94 ★ 2KJ1502 - 7CG13 - 77W1 21
34 152 1.6 39.73 2KJ1502 - 7CG13 - 77V1 21
37 141 1.8 36.69 ★ 2KJ1502 - 7CG13 - 77U1 21
43 121 2.1 31.59 2KJ1502 - 7CG13 - 77T1 21
48 110 2.3 28.72 ★ 2KJ1502 - 7CG13 - 77S1 21
51 103 2.1 26.9 ★ 2KJ1502 - 7CG13 - 77R1 21
57 93 2.3 24.16 2KJ1502 - 7CG13 - 77Q1 21
63 84 2.4 21.81 ★ 2KJ1502 - 7CG13 - 77P1 21
69 76 2.6 19.78 2KJ1502 - 7CG13 - 77N1 21
76 69 2.8 17.99 ★ 2KJ1502 - 7CG13 - 77M1 21
86 61 3.0 15.91 2KJ1502 - 7CG13 - 77L1 21
93 56 3.2 14.69 ★ 2KJ1502 - 7CG13 - 77K1 21
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/20 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.55 K.38-LA71ZMP4
108 48 3.5 12.65 2KJ1502 - 7CG13 - 77J1 21
B.38-LA80M6
17.9 293 0.85 50.72 2KJ1501 - 7DC13 - 77S2 P01 27
B.38-LA71ZMP4
21 252 0.99 65.69 2KJ1501 - 7CG13 - 77U2 23
24 219 1.1 57.04 2KJ1501 - 7CG13 - 77T2 23
27 194 1.3 50.72 2KJ1501 - 7CG13 - 77S2 23
31 169 1.5 44 2KJ1501 - 7CG13 - 77R2 23
33 158 1.6 41.11 2KJ1501 - 7CG13 - 77Q2 23 4
38 139 1.8 36.16 2KJ1501 - 7CG13 - 77P2 23
43 121 2.1 31.67 2KJ1501 - 7CG13 - 77N2 23
49 107 2.3 28.01 2KJ1501 - 7CG13 - 77M2 23
54 97 2.6 25.38 2KJ1501 - 7CG13 - 77L2 23
61 86 2.8 22.41 2KJ1501 - 7CG13 - 77K2 23
68 78 3.0 20.22 2KJ1501 - 7CG13 - 77J2 23
75 70 3.2 18.33 2KJ1501 - 7CG13 - 77H2 23
B.28-LA71ZMP4
36 145 0.90 37.76 2KJ1500 - 7CG13 - 77A2 11
40 130 1.0 33.79 2KJ1500 - 7CG13 - 77X1 11
46 115 1.1 29.99 2KJ1500 - 7CG13 - 77W1 11
52 101 1.3 26.28 2KJ1500 - 7CG13 - 77V1 11
59 89 1.5 23.11 2KJ1500 - 7CG13 - 77U1 11
66 80 1.6 20.87 2KJ1500 - 7CG13 - 77T1 11
75 70 1.9 18.19 2KJ1500 - 7CG13 - 77S1 11
84 63 2.1 16.34 2KJ1500 - 7CG13 - 77R1 11
93 57 2.3 14.75 2KJ1500 - 7CG13 - 77Q1 11
102 51 2.5 13.38 2KJ1500 - 7CG13 - 77P1 11
113 47 2.8 12.17 2KJ1500 - 7CG13 - 77N1 11
127 41 3.2 10.76 2KJ1500 - 7CG13 - 77M1 11
138 38 3.4 9.94 2KJ1500 - 7CG13 - 77L1 11
160 33 3.7 8.56 2KJ1500 - 7CG13 - 77K1 11
176 30 3.9 7.78 2KJ1500 - 7CG13 - 77J1 11
183 29 3.1 7.49 2KJ1500 - 7CG13 - 77H1 11
203 26 3.5 6.76 2KJ1500 - 7CG13 - 77G1 11
223 24 3.8 6.13 2KJ1500 - 7CG13 - 77F1 11
246 21 4.2 5.58 2KJ1500 - 7CG13 - 77E1 11
277 19 4.8 4.94 2KJ1500 - 7CG13 - 77D1 11
300 18 5.0 4.56 2KJ1500 - 7CG13 - 77C1 11
0.75 K.188-Z68-LA80ZMB4E
0.26 24 688 0.81 5 405 2KJ1541 - 7DE13 - 77 S1 751
0.29 22 331 0.90 4 889 ★ 2KJ1541 - 7DE13 - 77 R1 751
0.31 20 563 0.97 4 502 2KJ1541 - 7DE13 - 77 Q1 751
0.34 19 015 1.1 4 163 ★ 2KJ1541 - 7DE13 - 77 P1 751
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/21

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.75 K.188-Z68-LA80ZMB4E
0.36 17 654 1.1 3 865 2KJ1541 - 7DE13 - 77 N1 751
0.41 15 576 1.3 3 410 ★ 2KJ1541 - 7DE13 - 77 M1 751
0.44 14 379 1.4 3 148 2KJ1541 - 7DE13 - 77 L1 751
0.50 12 885 1.6 2 821 ★ 2KJ1541 - 7DE13 - 77 K1 751
0.54 11 880 1.7 2 601 2KJ1541 - 7DE13 - 77 J1 751
0.64 9 967 2.0 2 182 2KJ1541 - 7DE13 - 77 H1 751
K.168-Z48-LA80ZMB4E
0.40 16 115 0.84 3 528 2KJ1537 - 7DE13 - 77 J1 490
4 0.44 14 379 0.94 3 148 ★ 2KJ1537 - 7DE13 - 77 H1 490
0.50 12 835 1.1 2 810 2KJ1537 - 7DE13 - 77 G1 490
0.59 10 898 1.2 2 386 2KJ1537 - 7DE13 - 77 F1 490
0.70 9 071 1.5 1 986 ★ 2KJ1537 - 7DE13 - 77 E1 490
0.72 8 930 1.5 1 955 ★ 2KJ1537 - 7DE13 - 77 D1 490
0.80 7 971 1.7 1 745 2KJ1537 - 7DE13 - 77 C1 490
0.94 6 769 2.0 1 482 2KJ1537 - 7DE13 - 77 B1 490
K.148-Z38-LA80ZMB4E
0.68 9 377 0.85 2 053 2KJ1534 - 7DE13 - 77 D1 300
0.74 8 610 0.93 1 885 2KJ1534 - 7DE13 - 77 C1 300
0.82 7 760 1.0 1 699 2KJ1534 - 7DE13 - 77 B1 300
0.96 6 673 1.2 1 461 2KJ1534 - 7DE13 - 77 A1 300
K.148-Z68-LA80ZMB4E
1.0 6 358 1.3 1 392 2KJ1536 - 7DE13 - 77 L1 326
1.1 5 696 1.4 1 247 ★ 2KJ1536 - 7DE13 - 77 K1 326
1.2 5 253 1.5 1 150 2KJ1536 - 7DE13 - 77 J1 326
1.5 4 408 1.8 965 2KJ1536 - 7DE13 - 77 H1 326
K.128-Z48-LA80ZMB4E
1.1 5 865 0.80 1 284 2KJ1533 - 7DE13 - 77 N1 214
1.2 5 404 0.87 1 183 2KJ1533 - 7DE13 - 77 M1 214
1.3 4 906 0.96 1 074 2KJ1533 - 7DE13 - 77 L1 214
1.4 4 472 1.1 979 2KJ1533 - 7DE13 - 77 K1 214
1.6 4 097 1.1 897 2KJ1533 - 7DE13 - 77 J1 214
1.8 3 654 1.3 800 2KJ1533 - 7DE13 - 77 H1 214
2.0 3 261 1.4 714 2KJ1533 - 7DE13 - 77 G1 214
K.128-LA100LA8
2.3 3 111 1.5 295.38 ★ 2KJ1507 - 7FB13 - 77 L2 P02 217
2.5 2 853 1.6 270.9 2KJ1507 - 7FB13 - 77 K2 P02 217
2.8 2 549 1.8 242.02 ★ 2KJ1507 - 7FB13 - 77 J2 P02 217
3.1 2 335 2.0 221.64 2KJ1507 - 7FB13 - 77 H2 P02 217
K.108-Z48-LA80ZMB4E
1.8 3 508 0.86 768 ★ 2KJ1530 - 7DE13 - 77 H1 147
2.0 3 129 0.96 685 2KJ1530 - 7DE13 - 77 G1 147
K.108-LA100LA8
2.8 2 564 1.2 243.47 2KJ1506 - 7FB13 - 77 H2 P02 146
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/22 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.75 K.108-LA90SB6E
3.0 2 379 1.2 307.24 2KJ1506 - 7ED13 - 77 K2 P01 135
3.3 2 153 1.3 278.1 ★ 2KJ1506 - 7ED13 - 77 J2 P01 135
3.8 1 885 1.6 243.47 2KJ1506 - 7ED13 - 77 H2 P01 135
4.2 1 701 1.8 219.64 ★ 2KJ1506 - 7ED13 - 77 G2 P01 135
K.108-LA80ZMB4E
4.6 1 572 1.8 307.24 2KJ1506 - 7DE13 - 77 K2 132
5.0 1 423 2.0 278.1 ★ 2KJ1506 - 7DE13 - 77 J2 132
K.88-LA90SB6E
3.8 1 906 0.87 246.13 ★ 2KJ1505 - 7ED13 - 77 K2 P01 81 4
4.3 1 667 0.99 215.25 2KJ1505 - 7ED13 - 77 J2 P01 81
K.88-LA80ZMB4E
4.6 1 549 0.99 302.68 ★ 2KJ1505 - 7DE13 - 77 M2 78
5.1 1 396 1.2 272.95 2KJ1505 - 7DE13 - 77 L2 78
5.7 1 259 1.3 246.13 ★ 2KJ1505 - 7DE13 - 77 K2 78
6.5 1 101 1.5 215.25 2KJ1505 - 7DE13 - 77 J2 78
7.2 989 1.7 193.24 ★ 2KJ1505 - 7DE13 - 77 H2 78
7.9 903 1.8 176.5 2KJ1505 - 7DE13 - 77 G2 78
8.9 801 2.1 156.63 ★ 2KJ1505 - 7DE13 - 77 F2 78
K.68-LA80ZMB4E
7.1 1 003 0.82 196.07 2KJ1504 - 7DE13 - 77 L2 48
7.9 901 0.91 176.14 ★ 2KJ1504 - 7DE13 - 77 K2 48
9.3 772 1.1 150.98 2KJ1504 - 7DE13 - 77 J2 48
10.2 699 1.2 136.6 ★ 2KJ1504 - 7DE13 - 77 H2 48
11.1 645 1.3 126.09 2KJ1504 - 7DE13 - 77 G2 48
12.8 561 1.5 109.64 ★ 2KJ1504 - 7DE13 - 77 F2 48
14.1 509 1.6 99.55 2KJ1504 - 7DE13 - 77 E2 48
15.4 465 1.8 90.89 ★ 2KJ1504 - 7DE13 - 77 D2 48
16.8 427 1.9 83.4 2KJ1504 - 7DE13 - 77 C2 48
18.2 393 2.1 76.84 ★ 2KJ1504 - 7DE13 - 77 B2 48
20 357 2.3 69.78 2KJ1504 - 7DE13 - 77 A2 48
K.48-LA80ZMB4E
13.0 550 0.82 107.47 ★ 2KJ1503 - 7DE13 - 77 E2 29
14.9 482 0.93 94.12 2KJ1503 - 7DE13 - 77 D2 29
16.8 426 1.1 83.25 ★ 2KJ1503 - 7DE13 - 77 C2 29
18.6 386 1.2 75.45 2KJ1503 - 7DE13 - 77 B2 29
21 341 1.3 66.6 ★ 2KJ1503 - 7DE13 - 77 A2 29
23 307 1.5 60.08 2KJ1503 - 7DE13 - 77 X1 29
26 279 1.6 54.49 ★ 2KJ1503 - 7DE13 - 77 W1 29
28 254 1.8 49.65 2KJ1503 - 7DE13 - 77 V1 29
31 232 1.9 45.41 ★ 2KJ1503 - 7DE13 - 77 U1 29
34 208 2.2 40.6 2KJ1503 - 7DE13 - 77 T1 29
38 191 2.4 37.28 ★ 2KJ1503 - 7DE13 - 77 S1 29
42 172 2.6 33.6 2KJ1503 - 7DE13 - 77 R1 29
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/23

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.75 K.38-LA80ZMB4E
23 309 0.81 60.33 2KJ1502 - 7DE13 - 77 B2 25
26 279 0.90 54.47 ★ 2KJ1502 - 7DE13 - 77 A2 25
28 253 0.99 49.38 2KJ1502 - 7DE13 - 77 X1 25
31 230 1.1 44.94 ★ 2KJ1502 - 7DE13 - 77 W1 25
35 203 1.2 39.73 2KJ1502 - 7DE13 - 77 V1 25
38 188 1.3 36.69 ★ 2KJ1502 - 7DE13 - 77 U1 25
44 162 1.5 31.59 2KJ1502 - 7DE13 - 77 T1 25
49 147 1.7 28.72 ★ 2KJ1502 - 7DE13 - 77 S1 25
4 52 138 1.6 26.9 ★ 2KJ1502 - 7DE13 - 77 R1 25
58 124 1.7 24.16 2KJ1502 - 7DE13 - 77 Q1 25
64 112 1.8 21.81 ★ 2KJ1502 - 7DE13 - 77 P1 25
71 101 1.9 19.78 2KJ1502 - 7DE13 - 77 N1 25
78 92 2.1 17.99 ★ 2KJ1502 - 7DE13 - 77 M1 25
88 81 2.3 15.91 2KJ1502 - 7DE13 - 77 L1 25
95 75 2.4 14.69 ★ 2KJ1502 - 7DE13 - 77 K1 25
111 65 2.7 12.65 2KJ1502 - 7DE13 - 77 J1 25
122 59 2.8 11.5 ★ 2KJ1502 - 7DE13 - 77 H1 25
131 55 2.9 10.72 ★ 2KJ1502 - 7DE13 - 77 G1 25
144 50 3.2 9.72 2KJ1502 - 7DE13 - 77 F1 25
158 45 3.5 8.85 ★ 2KJ1502 - 7DE13 - 77 E1 25
179 40 4.0 7.82 2KJ1502 - 7DE13 - 77 D1 25
194 37 4.3 7.22 ★ 2KJ1502 - 7DE13 - 77 C1 25
B.38-LA80ZMB4E
24 292 0.86 57.04 2KJ1501 - 7DE13 - 77 T2 27
28 259 0.96 50.72 2KJ1501 - 7DE13 - 77 S2 27
32 225 1.1 44 2KJ1501 - 7DE13 - 77 R2 27
34 210 1.2 41.11 2KJ1501 - 7DE13 - 77 Q2 27
39 185 1.4 36.16 2KJ1501 - 7DE13 - 77 P2 27
44 162 1.5 31.67 2KJ1501 - 7DE13 - 77 N2 27
50 143 1.7 28.01 2KJ1501 - 7DE13 - 77 M2 27
55 130 1.9 25.38 2KJ1501 - 7DE13 - 77 L2 27
62 115 2.1 22.41 2KJ1501 - 7DE13 - 77 K2 27
69 103 2.2 20.22 2KJ1501 - 7DE13 - 77 J2 27
76 94 2.4 18.33 2KJ1501 - 7DE13 - 77 H2 27
84 85 2.6 16.7 2KJ1501 - 7DE13 - 77 G2 27
92 78 2.7 15.28 2KJ1501 - 7DE13 - 77 F2 27
102 70 3.0 13.66 2KJ1501 - 7DE13 - 77 E2 27
112 64 3.4 12.5 2KJ1501 - 7DE13 - 77 C2 27
B.28-LA80ZMB4E
47 153 0.85 29.99 2KJ1500 - 7DE13 - 77 W1 15
53 134 0.97 26.28 2KJ1500 - 7DE13 - 77 V1 15
61 118 1.1 23.11 2KJ1500 - 7DE13 - 77 U1 15
67 107 1.2 20.87 2KJ1500 - 7DE13 - 77 T1 15
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/24 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
0.75 B.28-LA80ZMB4E
77 93 1.4 18.19 2KJ1500 - 7DE13 - 77 S1 15
86 84 1.6 16.34 2KJ1500 - 7DE13 - 77 R1 15
95 76 1.7 14.75 2KJ1500 - 7DE13 - 77 Q1 15
105 68 1.9 13.38 2KJ1500 - 7DE13 - 77 P1 15
115 62 2.1 12.17 2KJ1500 - 7DE13 - 77 N1 15
130 55 2.4 10.76 2KJ1500 - 7DE13 - 77 M1 15
141 51 2.5 9.94 2KJ1500 - 7DE13 - 77 L1 15
164 44 2.8 8.56 2KJ1500 - 7DE13 - 77 K1 15
180 40 2.9 7.78 2KJ1500 - 7DE13 - 77 J1 15 4
187 38 2.3 7.49 2KJ1500 - 7DE13 - 77 H1 15
207 35 2.6 6.76 2KJ1500 - 7DE13 - 77 G1 15
228 31 2.9 6.13 2KJ1500 - 7DE13 - 77 F1 15
251 28 3.2 5.58 2KJ1500 - 7DE13 - 77 E1 15
283 25 3.6 4.94 2KJ1500 - 7DE13 - 77 D1 15
307 23 3.7 4.56 2KJ1500 - 7DE13 - 77 C1 15
357 20 4.1 3.92 2KJ1500 - 7DE13 - 77 B1 15
392 18 4.3 3.57 2KJ1500 - 7DE13 - 77 A1 15
1.1 K.188-Z68-LA90SB4E
0.42 22 504 0.89 3 410 ★ 2KJ1541 - 7EM13 - 77M1 754
0.46 20 775 0.96 3 148 2KJ1541 - 7EM13 - 77L1 754
0.51 18 617 1.1 2 821 ★ 2KJ1541 - 7EM13 - 77K1 754
0.55 17 165 1.2 2 601 2KJ1541 - 7EM13 - 77J1 754
0.66 14 400 1.4 2 182 2KJ1541 - 7EM13 - 77H1 754
0.77 12 288 1.6 1 862 ★ 2KJ1541 - 7EM13 - 77G1 754
K.168-Z68-LA90SB4E
1.4 6 817 2.0 1 033 2KJ1540 - 7EM13 - 77H1 510
K.168-Z48-LA90SB4E
0.60 15 746 0.86 2 386 2KJ1537 - 7EM13 - 77F1 493
0.72 13 107 1.0 1 986 ★ 2KJ1537 - 7EM13 - 77E1 493
0.74 12 902 1.0 1 955 ★ 2KJ1537 - 7EM13 - 77D1 493
0.82 11 516 1.2 1 745 2KJ1537 - 7EM13 - 77C1 493
0.97 9 780 1.4 1 482 2KJ1537 - 7EM13 - 77B1 493
1.2 8 137 1.7 1 233 ★ 2KJ1537 - 7EM13 - 77A1 493
K.148-Z68-LA90SB4E
1.0 9 186 0.87 1 392 2KJ1536 - 7EM13 - 77L1 329
1.2 8 230 0.97 1 247 ★ 2KJ1536 - 7EM13 - 77K1 329
1.3 7 589 1.1 1 150 2KJ1536 - 7EM13 - 77J1 329
1.5 6 368 1.3 965 2KJ1536 - 7EM13 - 77H1 329
1.7 5 431 1.5 823 ★ 2KJ1536 - 7EM13 - 77G1 329
K.148-Z38-LA90SB4E
0.99 9 642 0.83 1 461 2KJ1534 - 7EM13 - 77A1 303
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/25

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.1 K.148-LA100L8
2.2 4 728 1.7 306.08 2KJ1508 - 7FL13 - 7 7N2 P02 317
2.5 4 239 1.9 274.42 ★ 2KJ1508 - 7FL13 - 7 7M2 P02 317
K.128-Z48-LA90SB4E
1.8 5 280 0.89 800 2KJ1533 - 7EM13 - 77H1 217
2.0 4 712 1.0 714 2KJ1533 - 7EM13 - 77G1 217
K.128-LA100L8
2.3 4 563 1.0 295.38 ★ 2KJ1507 - 7FL13 - 7 7L2 P02 217
2.5 4 185 1.1 270.9 2KJ1507 - 7FL13 - 7 7K2 P02 217
4 2.8 3 739 1.3 242.02 ★ 2KJ1507 - 7FL13 - 7 7J2 P02 217
3.1 3 424 1.4 221.64 2KJ1507 - 7FL13 - 7 7H2 P02 217
K.128-LA90ZLD6E
3.2 3 301 1.4 295.38 ★ 2KJ1507 - 7EQ13 - 77 L2 P01 209
3.5 3 027 1.6 270.9 2KJ1507 - 7EQ13 - 77 K2 P01 209
3.9 2 705 1.7 242.02 ★ 2KJ1507 - 7EQ13 - 77 J2 P01 209
4.2 2 477 1.9 221.64 2KJ1507 - 7EQ13 - 77 H2 P01 209
K.108-LA100L8
2.8 3 761 0.80 243.47 2KJ1506 - 7FL13 - 7 7H2 P02 146
K.108-LA90ZLD6E
3.1 3 434 0.85 307.24 2KJ1506 - 7EQ13 - 77 K2 P01 138
3.4 3 108 0.91 278.1 ★ 2KJ1506 - 7EQ13 - 77 J2 P01 138
3.9 2 721 1.1 243.47 2KJ1506 - 7EQ13 - 77 H2 P01 138
4.3 2 455 1.2 219.64 ★ 2KJ1506 - 7EQ13 - 77 G2 P01 138
K.108-LA90SB4E
4.7 2 241 1.3 307.24 2KJ1506 - 7EM13 - 77K2 135
5.2 2 029 1.4 278.1 ★ 2KJ1506 - 7EM13 - 77J2 135
5.9 1 776 1.7 243.47 2KJ1506 - 7EM13 - 77H2 135
6.6 1 602 1.9 219.64 ★ 2KJ1506 - 7EM13 - 77G2 135
7.2 1 467 2.0 201.11 2KJ1506 - 7EM13 - 77F2 135
K.88-LA90SB4E
5.3 1 991 0.83 272.95 2KJ1505 - 7EM13 - 77L2 81
5.9 1 796 0.92 246.13 ★ 2KJ1505 - 7EM13 - 77K2 81
6.7 1 570 1.1 215.25 2KJ1505 - 7EM13 - 77J2 81
7.5 1 410 1.2 193.24 ★ 2KJ1505 - 7EM13 - 77H2 81
8.2 1 288 1.3 176.5 2KJ1505 - 7EM13 - 77G2 81
9.2 1 143 1.4 156.63 ★ 2KJ1505 - 7EM13 - 77F2 81
10.0 1 055 1.6 144.58 2KJ1505 - 7EM13 - 77E2 81
11.0 954 1.7 130.77 ★ 2KJ1505 - 7EM13 - 77D2 81
12.0 878 1.9 120.42 2KJ1505 - 7EM13 - 77C2 81
12.9 812 2.0 111.37 ★ 2KJ1505 - 7EM13 - 77B2 81
13.9 754 2.2 103.38 2KJ1505 - 7EM13 - 77A2 81
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/26 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.1 K.68-LA90SB4E
10.5 997 0.82 136.6 ★ 2KJ1504 - 7EM13 - 77H2 51
11.4 920 0.89 126.09 2KJ1504 - 7EM13 - 77G2 51
13.1 800 1.0 109.64 ★ 2KJ1504 - 7EM13 - 77F2 51
14.5 726 1.1 99.55 2KJ1504 - 7EM13 - 77E2 51
15.8 663 1.2 90.89 ★ 2KJ1504 - 7EM13 - 77D2 51
17.3 608 1.3 83.4 2KJ1504 - 7EM13 - 77C2 51
18.7 561 1.5 76.84 ★ 2KJ1504 - 7EM13 - 77B2 51
21 509 1.6 69.78 2KJ1504 - 7EM13 - 77A2 51
23 464 1.8 63.57 ★ 2KJ1504 - 7EM13 - 77X1 51 4
25 425 1.9 58.23 2KJ1504 - 7EM13 - 77W1 51
28 379 2.2 51.96 ★ 2KJ1504 - 7EM13 - 77V1 51
31 338 2.4 46.37 2KJ1504 - 7EM13 - 77U1 51
K.48-LA90SB4E
19.1 550 0.82 75.45 2KJ1503 - 7EM13 - 77B2 32
22 486 0.93 66.6 ★ 2KJ1503 - 7EM13 - 77A2 32
24 438 1.0 60.08 2KJ1503 - 7EM13 - 77X1 32
26 398 1.1 54.49 ★ 2KJ1503 - 7EM13 - 77W1 32
29 362 1.2 49.65 2KJ1503 - 7EM13 - 77V1 32
32 331 1.4 45.41 ★ 2KJ1503 - 7EM13 - 77U1 32
36 296 1.5 40.6 2KJ1503 - 7EM13 - 77T1 32
39 272 1.7 37.28 ★ 2KJ1503 - 7EM13 - 77S1 32
43 245 1.8 33.6 2KJ1503 - 7EM13 - 77R1 32
50 211 2.1 28.9 ★ 2KJ1503 - 7EM13 - 77Q1 32
52 201 2.2 27.55 ★ 2KJ1503 - 7EM13 - 77P1 32
58 181 2.5 24.85 2KJ1503 - 7EM13 - 77N1 32
64 164 2.7 22.54 ★ 2KJ1503 - 7EM13 - 77M1 32
70 150 3.0 20.54 2KJ1503 - 7EM13 - 77L1 32
127 83 3.5 11.35 ★ 2KJ1503 - 7EM13 - 77E1 32
142 74 3.8 10.15 2KJ1503 - 7EM13 - 77D1 32
K.38-LA90SB4E
36 290 0.86 39.73 2KJ1502 - 7EM13 - 77V1 28
39 268 0.93 36.69 ★ 2KJ1502 - 7EM13 - 77U1 28
46 230 1.1 31.59 2KJ1502 - 7EM13 - 77T1 28
50 210 1.2 28.72 ★ 2KJ1502 - 7EM13 - 77S1 28
54 196 1.1 26.9 ★ 2KJ1502 - 7EM13 - 77R1 28
60 176 1.2 24.16 2KJ1502 - 7EM13 - 77Q1 28
66 159 1.3 21.81 ★ 2KJ1502 - 7EM13 - 77P1 28
73 144 1.4 19.78 2KJ1502 - 7EM13 - 77N1 28
80 131 1.5 17.99 ★ 2KJ1502 - 7EM13 - 77M1 28
90 116 1.6 15.91 2KJ1502 - 7EM13 - 77L1 28
98 107 1.7 14.69 ★ 2KJ1502 - 7EM13 - 77K1 28
114 92 1.9 12.65 2KJ1502 - 7EM13 - 77J1 28
125 84 2.0 11.5 ★ 2KJ1502 - 7EM13 - 77H1 28
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/27

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.1 K.38-LA90SB4E
134 78 2.0 10.72 ★ 2KJ1502 - 7EM13 - 77G1 28
148 71 2.2 9.72 2KJ1502 - 7EM13 - 77F1 28
163 65 2.5 8.85 ★ 2KJ1502 - 7EM13 - 77E1 28
184 57 2.8 7.82 2KJ1502 - 7EM13 - 77D1 28
199 53 3.0 7.22 ★ 2KJ1502 - 7EM13 - 77C1 28
232 45 3.3 6.22 2KJ1502 - 7EM13 - 77B1 28
255 41 3.6 5.65 ★ 2KJ1502 - 7EM13 - 77A1 28
B.38-LA90SB4E
4 35 300 0.83 41.11 2KJ1501 - 7EM13 - 77Q2 30
40 264 0.95 36.16 2KJ1501 - 7EM13 - 77P2 30
46 231 1.1 31.67 2KJ1501 - 7EM13 - 77N2 30
51 204 1.2 28.01 2KJ1501 - 7EM13 - 77M2 30
57 185 1.4 25.38 2KJ1501 - 7EM13 - 77L2 30
64 163 1.5 22.41 2KJ1501 - 7EM13 - 77K2 30
71 148 1.6 20.22 2KJ1501 - 7EM13 - 77J2 30
79 134 1.7 18.33 2KJ1501 - 7EM13 - 77H2 30
86 122 1.8 16.7 2KJ1501 - 7EM13 - 77G2 30
94 111 1.9 15.28 2KJ1501 - 7EM13 - 77F2 30
105 100 2.1 13.66 2KJ1501 - 7EM13 - 77E2 30
115 91 2.4 12.5 2KJ1501 - 7EM13 - 77C2 30
130 81 2.8 11.05 2KJ1501 - 7EM13 - 77A2 30
144 73 3.0 10.02 2KJ1501 - 7EM13 - 77X1 30
163 64 3.7 8.84 2KJ1501 - 7EM13 - 77U1 30
180 58 4.1 7.98 2KJ1501 - 7EM13 - 77S1 30
B.28-LA90SB4E
69 152 0.85 20.87 2KJ1500 - 7EM13 - 77T1 18
79 133 0.98 18.19 2KJ1500 - 7EM13 - 77S1 18
88 119 1.1 16.34 2KJ1500 - 7EM13 - 77R1 18
98 108 1.2 14.75 2KJ1500 - 7EM13 - 77Q1 18
108 98 1.3 13.38 2KJ1500 - 7EM13 - 77P1 18
118 89 1.5 12.17 2KJ1500 - 7EM13 - 77N1 18
134 78 1.7 10.76 2KJ1500 - 7EM13 - 77M1 18
145 72 1.8 9.94 2KJ1500 - 7EM13 - 77L1 18
168 62 1.9 8.56 2KJ1500 - 7EM13 - 77K1 18
185 57 2.1 7.78 2KJ1500 - 7EM13 - 77J1 18
192 55 1.6 7.49 2KJ1500 - 7EM13 - 77H1 18
213 49 1.8 6.76 2KJ1500 - 7EM13 - 77G1 18
235 45 2.0 6.13 2KJ1500 - 7EM13 - 77F1 18
258 41 2.2 5.58 2KJ1500 - 7EM13 - 77E1 18
291 36 2.5 4.94 2KJ1500 - 7EM13 - 77D1 18
316 33 2.6 4.56 2KJ1500 - 7EM13 - 77C1 18
367 29 2.9 3.92 2KJ1500 - 7EM13 - 77B1 18
403 26 3.0 3.57 2KJ1500 - 7EM13 - 77A1 18
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/28 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.5 K.188-Z68-LA90ZLB4E
0.55 23 582 0.85 2 601 2KJ1541 - 7EQ13 - 77 J1 757
0.66 19 783 1.0 2 182 2KJ1541 - 7EQ13 - 77 H1 757
0.77 16 882 1.2 1 862 ★ 2KJ1541 - 7EQ13 - 77 G1 757
1.3 10 291 1.9 1 135 2KJ1541 - 7EQ13 - 77 D1 757
K.168-Z68-LA90ZLB4E
1.4 9 366 1.4 1 033 2KJ1540 - 7EQ13 - 77 H1 513
1.6 7 988 1.7 881 2KJ1540 - 7EQ13 - 77 G1 513
K.168-Z48-LA90ZLB4E
0.82 15 821 0.85 1 745 2KJ1537 - 7EQ13 - 77 C1 496 4
0.97 13 437 1.0 1 482 2KJ1537 - 7EQ13 - 77 B1 496
1.2 11 179 1.2 1 233 ★ 2KJ1537 - 7EQ13 - 77 A1 496
K.148-Z68-LA90ZLB4E
1.5 8 749 0.91 965 2KJ1536 - 7EQ13 - 77 H1 332
1.7 7 462 1.1 823 ★ 2KJ1536 - 7EQ13 - 77 G1 332
K.148-LA112M8
2.3 6 219 1.3 306.08 2KJ1508 - 7GG13 - 77N2 P02 324
2.6 5 576 1.4 274.42 ★ 2KJ1508 - 7GG13 - 77M2 P02 324
2.8 5 111 1.6 251.55 2KJ1508 - 7GG13 - 77L2 P02 324
3.0 4 713 1.7 231.95 ★ 2KJ1508 - 7GG13 - 77K2 P02 324
K.148-LA100ZLP6E
3.1 4 689 1.7 306.08 2KJ1508 - 7FM13 - 77N2 P01 317
3.4 4 204 1.9 274.42 ★ 2KJ1508 - 7FM13 - 77M2 P01 317
K.128-LA112M8
2.6 5 504 0.85 270.9 2KJ1507 - 7GG13 - 77K2 P02 224
2.9 4 918 0.96 242.02 ★ 2KJ1507 - 7GG13 - 77J2 P02 224
K.128-LA100ZLP6E
3.2 4 525 1.0 295.38 ★ 2KJ1507 - 7FM13 - 77L2 P01 217
3.5 4 150 1.1 270.9 2KJ1507 - 7FM13 - 77K2 P01 217
3.9 3 708 1.3 242.02 ★ 2KJ1507 - 7FM13 - 77J2 P01 217
4.2 3 396 1.4 221.64 2KJ1507 - 7FM13 - 77H2 P01 217
4.6 3 128 1.5 204.18 ★ 2KJ1507 - 7FM13 - 77G2 P01 217
K.128-LA90ZLB4E
4.9 2 938 1.6 295.38 ★ 2KJ1507 - 7EQ13 - 77 L2 209
5.3 2 695 1.7 270.9 2KJ1507 - 7EQ13 - 77 K2 209
5.9 2 408 2.0 242.02 ★ 2KJ1507 - 7EQ13 - 77 J2 209
6.5 2 205 2.1 221.64 2KJ1507 - 7EQ13 - 77 H2 209
K.108-LA100ZLP6E
3.8 3 730 0.80 243.47 2KJ1506 - 7FM13 - 77H2 P01 146
4.3 3 365 0.89 219.64 ★ 2KJ1506 - 7FM13 - 77G2 P01 146
K.108-LA90ZLB4E
4.7 3 056 0.95 307.24 2KJ1506 - 7EQ13 - 77 K2 138
5.2 2 767 1.0 278.1 ★ 2KJ1506 - 7EQ13 - 77 J2 138
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/29

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.5 K.108-LA90ZLB4E
5.9 2 422 1.2 243.47 2KJ1506 - 7EQ13 - 77 H2 138
6.6 2 185 1.4 219.64 ★ 2KJ1506 - 7EQ13 - 77 G2 138
7.2 2 001 1.5 201.11 2KJ1506 - 7EQ13 - 77 F2 138
8.0 1 780 1.7 178.9 ★ 2KJ1506 - 7EQ13 - 77 E2 138
8.8 1 627 1.8 163.51 2KJ1506 - 7EQ13 - 77 D2 138
9.6 1 495 2.0 150.31 ★ 2KJ1506 - 7EQ13 - 77 C2 138
10.4 1 381 2.2 138.87 2KJ1506 - 7EQ13 - 77 B2 138
K.88-LA90ZLB4E
4 7.5 1 922 0.86 193.24 ★ 2KJ1505 - 7EQ13 - 77 H2 84
8.2 1 756 0.94 176.5 2KJ1505 - 7EQ13 - 77 G2 84
9.2 1 558 1.1 156.63 ★ 2KJ1505 - 7EQ13 - 77 F2 84
10.0 1 438 1.1 144.58 2KJ1505 - 7EQ13 - 77 E2 84
11.0 1 301 1.3 130.77 ★ 2KJ1505 - 7EQ13 - 77 D2 84
12.0 1 198 1.4 120.42 2KJ1505 - 7EQ13 - 77 C2 84
12.9 1 108 1.5 111.37 ★ 2KJ1505 - 7EQ13 - 77 B2 84
13.9 1 028 1.6 103.38 2KJ1505 - 7EQ13 - 77 A2 84
15.8 907 1.8 91.22 ★ 2KJ1505 - 7EQ13 - 77 X1 84
17.1 838 2.0 84.21 2KJ1505 - 7EQ13 - 77 W1 84
19.1 751 2.2 75.45 ★ 2KJ1505 - 7EQ13 - 77 V1 84
21 692 2.4 69.57 2KJ1505 - 7EQ13 - 77 U1 84
K.68-LA90ZLB4E
14.5 990 0.83 99.55 2KJ1504 - 7EQ13 - 77 E2 54
15.8 904 0.91 90.89 ★ 2KJ1504 - 7EQ13 - 77 D2 54
17.3 830 0.99 83.4 2KJ1504 - 7EQ13 - 77 C2 54
18.7 764 1.1 76.84 ★ 2KJ1504 - 7EQ13 - 77 B2 54
21 694 1.2 69.78 2KJ1504 - 7EQ13 - 77 A2 54
23 632 1.3 63.57 ★ 2KJ1504 - 7EQ13 - 77 X1 54
25 579 1.4 58.23 2KJ1504 - 7EQ13 - 77 W1 54
28 517 1.6 51.96 ★ 2KJ1504 - 7EQ13 - 77 V1 54
31 461 1.8 46.37 2KJ1504 - 7EQ13 - 77 U1 54
37 392 2.1 39.39 2KJ1504 - 7EQ13 - 77 T1 54
44 326 2.5 32.78 ★ 2KJ1504 - 7EQ13 - 77 S1 54
47 302 2.7 30.38 2KJ1504 - 7EQ13 - 77 R1 54
126 114 3.8 11.41 2KJ1504 - 7EQ13 - 77 G1 54
K.48-LA90ZLB4E
26 542 0.83 54.49 ★ 2KJ1503 - 7EQ13 - 77 W1 35
29 494 0.91 49.65 2KJ1503 - 7EQ13 - 77 V1 35
32 452 1.0 45.41 ★ 2KJ1503 - 7EQ13 - 77 U1 35
36 404 1.1 40.6 2KJ1503 - 7EQ13 - 77 T1 35
39 371 1.2 37.28 ★ 2KJ1503 - 7EQ13 - 77 S1 35
43 334 1.3 33.6 2KJ1503 - 7EQ13 - 77 R1 35
50 287 1.6 28.9 ★ 2KJ1503 - 7EQ13 - 77 Q1 35
52 274 1.6 27.55 ★ 2KJ1503 - 7EQ13 - 77 P1 35
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/30 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.5 K.48-LA90ZLB4E
58 247 1.8 24.85 2KJ1503 - 7EQ13 - 77 N1 35
64 224 2.0 22.54 ★ 2KJ1503 - 7EQ13 - 77 M1 35
70 204 2.2 20.54 2KJ1503 - 7EQ13 - 77 L1 35
77 187 2.4 18.78 ★ 2KJ1503 - 7EQ13 - 77 K1 35
86 167 2.7 16.79 2KJ1503 - 7EQ13 - 77 J1 35
93 153 2.9 15.42 ★ 2KJ1503 - 7EQ13 - 77 H1 35
104 138 3.2 13.9 2KJ1503 - 7EQ13 - 77 G1 35
121 119 3.5 11.95 ★ 2KJ1503 - 7EQ13 - 77 F1 35
127 113 2.6 11.35 ★ 2KJ1503 - 7EQ13 - 77 E1 35 4
142 101 2.8 10.15 2KJ1503 - 7EQ13 - 77 D1 35
155 93 3.0 9.32 ★ 2KJ1503 - 7EQ13 - 77 C1 35
171 84 3.2 8.4 2KJ1503 - 7EQ13 - 77 B1 35
199 72 3.6 7.22 ★ 2KJ1503 - 7EQ13 - 77 A1 35
K.38-LA90ZLB4E
46 314 0.80 31.59 2KJ1502 - 7EQ13 - 77 T1 31
50 286 0.88 28.72 ★ 2KJ1502 - 7EQ13 - 77 S1 31
54 268 0.81 26.9 ★ 2KJ1502 - 7EQ13 - 77 R1 31
60 240 0.87 24.16 2KJ1502 - 7EQ13 - 77 Q1 31
66 217 0.94 21.81 ★ 2KJ1502 - 7EQ13 - 77 P1 31
73 197 1.0 19.78 2KJ1502 - 7EQ13 - 77 N1 31
80 179 1.1 17.99 ★ 2KJ1502 - 7EQ13 - 77 M1 31
90 158 1.2 15.91 2KJ1502 - 7EQ13 - 77 L1 31
98 146 1.2 14.69 ★ 2KJ1502 - 7EQ13 - 77 K1 31
114 126 1.4 12.65 2KJ1502 - 7EQ13 - 77 J1 31
125 114 1.5 11.5 ★ 2KJ1502 - 7EQ13 - 77 H1 31
134 107 1.5 10.72 ★ 2KJ1502 - 7EQ13 - 77 G1 31
148 97 1.6 9.72 2KJ1502 - 7EQ13 - 77 F1 31
163 88 1.8 8.85 ★ 2KJ1502 - 7EQ13 - 77 E1 31
184 78 2.0 7.82 2KJ1502 - 7EQ13 - 77 D1 31
199 72 2.2 7.22 ★ 2KJ1502 - 7EQ13 - 77 C1 31
232 62 2.5 6.22 2KJ1502 - 7EQ13 - 77 B1 31
255 56 2.6 5.65 ★ 2KJ1502 - 7EQ13 - 77 A1 31
B.38-LA90ZLB4E
51 279 0.90 28.01 2KJ1501 - 7EQ13 - 77 M2 33
57 252 0.99 25.38 2KJ1501 - 7EQ13 - 77 L2 33
64 223 1.1 22.41 2KJ1501 - 7EQ13 - 77 K2 33
71 201 1.2 20.22 2KJ1501 - 7EQ13 - 77 J2 33
79 182 1.2 18.33 2KJ1501 - 7EQ13 - 77 H2 33
86 166 1.3 16.7 2KJ1501 - 7EQ13 - 77 G2 33
94 152 1.4 15.28 2KJ1501 - 7EQ13 - 77 F2 33
105 136 1.5 13.66 2KJ1501 - 7EQ13 - 77 E2 33
115 124 1.8 12.5 2KJ1501 - 7EQ13 - 77 C2 33
130 110 2.0 11.05 2KJ1501 - 7EQ13 - 77 A2 33
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/31

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
1.5 B.38-LA90ZLB4E
144 100 2.2 10.02 2KJ1501 - 7EQ13 - 77 X1 33
163 88 2.7 8.84 2KJ1501 - 7EQ13 - 77 U1 33
180 79 3.0 7.98 2KJ1501 - 7EQ13 - 77 S1 33
199 72 3.3 7.24 2KJ1501 - 7EQ13 - 77 R1 33
219 66 3.6 6.59 2KJ1501 - 7EQ13 - 77 P1 33
239 60 3.9 6.03 2KJ1501 - 7EQ13 - 77 M1 33
267 54 3.9 5.39 2KJ1501 - 7EQ13 - 77 K1 33
291 49 4.5 4.95 2KJ1501 - 7EQ13 - 77 H1 33
4 323 44 4.8 4.46 2KJ1501 - 7EQ13 - 77 F1 33
375 38 5.3 3.84 2KJ1501 - 7EQ13 - 77 C1 33
B.28-LA90ZLB4E
88 163 0.80 16.34 2KJ1500 - 7EQ13 - 77 R1 21
98 147 0.89 14.75 2KJ1500 - 7EQ13 - 77 Q1 21
108 133 0.98 13.38 2KJ1500 - 7EQ13 - 77 P1 21
118 121 1.1 12.17 2KJ1500 - 7EQ13 - 77 N1 21
134 107 1.2 10.76 2KJ1500 - 7EQ13 - 77 M1 21
145 99 1.3 9.94 2KJ1500 - 7EQ13 - 77 L1 21
168 85 1.4 8.56 2KJ1500 - 7EQ13 - 77 K1 21
185 77 1.5 7.78 2KJ1500 - 7EQ13 - 77 J1 21
192 74 1.2 7.49 2KJ1500 - 7EQ13 - 77 H1 21
213 67 1.3 6.76 2KJ1500 - 7EQ13 - 77 G1 21
235 61 1.5 6.13 2KJ1500 - 7EQ13 - 77 F1 21
258 56 1.6 5.58 2KJ1500 - 7EQ13 - 77 E1 21
291 49 1.8 4.94 2KJ1500 - 7EQ13 - 77 D1 21
316 45 1.9 4.56 2KJ1500 - 7EQ13 - 77 C1 21
367 39 2.1 3.92 2KJ1500 - 7EQ13 - 77 B1 21
403 36 2.2 3.57 2KJ1500 - 7EQ13 - 77 A1 21
2.2 K.188-Z68-LA100ZLP4E
0.77 25 008 0.80 1 862 ★ 2KJ1541 - 7FM13 - 77G1 765
0.92 20 831 0.96 1 551 2KJ1541 - 7FM13 - 77F1 765
1.1 17 272 1.2 1 286 ★ 2KJ1541 - 7FM13 - 77E1 765
1.3 15 244 1.3 1 135 2KJ1541 - 7FM13 - 77D1 765
1.5 13 001 1.5 968 ★ 2KJ1541 - 7FM13 - 77C1 765
1.8 10 838 1.8 807 2KJ1541 - 7FM13 - 77B1 765
K.168-Z68-LA100ZLP4E
1.4 13 874 0.97 1 033 2KJ1540 - 7FM13 - 77H1 521
1.6 11 832 1.1 881 2KJ1540 - 7FM13 - 77G1 521
2.0 9 871 1.4 735 2KJ1540 - 7FM13 - 77F1 521
K.168-Z48-LA100ZLP4E
1.2 16 560 0.82 1 233 ★ 2KJ1537 - 7FM13 - 77A1 504
K.168-LA132S8
2.4 8 643 1.6 287.95 ★ 2KJ1510 - 7HE13 - 77 H2 P02 519
2.6 7 929 1.7 264.18 2KJ1510 - 7HE13 - 77 G2 P02 519
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/32 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
2.2 K.168-LA132S8
2.9 7 317 1.8 243.8 ★ 2KJ1510 - 7HE13 - 77 F2 P02 519
3.1 6 788 2.0 226.15 2KJ1510 - 7HE13 - 77 E2 P02 519
K.148-Z68-LA100ZLP4E
2.1 9 213 0.87 686 2KJ1536 - 7FM13 - 77F1 340
K.148-LA132S8
2.6 8 237 0.97 274.42 ★ 2KJ1508 - 7HE13 - 77 M2 P02 334
2.8 7 550 1.1 251.55 2KJ1508 - 7HE13 - 77 L2 P02 334
3.0 6 962 1.1 231.95 ★ 2KJ1508 - 7HE13 - 77 K2 P02 334
K.148-LA112ZMP6E 4
3.1 6 734 1.2 306.08 2KJ1508 - 7GJ13 - 7 7N2 P01 324
3.5 6 037 1.3 274.42 ★ 2KJ1508 - 7GJ13 - 7 7M2 P01 324
3.8 5 534 1.4 251.55 2KJ1508 - 7GJ13 - 7 7L2 P01 324
4.1 5 103 1.6 231.95 ★ 2KJ1508 - 7GJ13 - 7 7K2 P01 324
4.4 4 729 1.7 214.96 2KJ1508 - 7GJ13 - 7 7J2 P01 324
K.148-LA100ZLP4E
4.7 4 481 1.8 306.08 2KJ1508 - 7FM13 - 77N2 317
5.2 4 018 2.0 274.42 ★ 2KJ1508 - 7FM13 - 77M2 317
K.128-LA112ZMP6E
3.9 5 324 0.88 242.02 ★ 2KJ1507 - 7GJ13 - 7 7J2 P01 224
4.3 4 876 0.96 221.64 2KJ1507 - 7GJ13 - 7 7H2 P01 224
4.7 4 492 1.0 204.18 ★ 2KJ1507 - 7GJ13 - 7 7G2 P01 224
K.128-LA100ZLP4E
4.9 4 325 1.1 295.38 ★ 2KJ1507 - 7FM13 - 77L2 217
5.3 3 966 1.2 270.9 2KJ1507 - 7FM13 - 77K2 217
5.9 3 543 1.3 242.02 ★ 2KJ1507 - 7FM13 - 77J2 217
6.5 3 245 1.4 221.64 2KJ1507 - 7FM13 - 77H2 217
7.0 2 989 1.6 204.18 ★ 2KJ1507 - 7FM13 - 77G2 217
7.6 2 768 1.7 189.04 2KJ1507 - 7FM13 - 77F2 217
8.2 2 574 1.8 175.8 ★ 2KJ1507 - 7FM13 - 77E2 217
8.7 2 403 2.0 164.11 2KJ1507 - 7FM13 - 77D2 217
K.108-LA100ZLP4E
5.9 3 565 0.84 243.47 2KJ1506 - 7FM13 - 77H2 146
6.5 3 216 0.93 219.64 ★ 2KJ1506 - 7FM13 - 77G2 146
7.1 2 944 1.0 201.11 2KJ1506 - 7FM13 - 77F2 146
8.0 2 619 1.1 178.9 ★ 2KJ1506 - 7FM13 - 77E2 146
8.8 2 394 1.3 163.51 2KJ1506 - 7FM13 - 77D2 146
9.5 2 201 1.4 150.31 ★ 2KJ1506 - 7FM13 - 77C2 146
10.3 2 033 1.5 138.87 2KJ1506 - 7FM13 - 77B2 146
11.1 1 887 1.6 128.86 ★ 2KJ1506 - 7FM13 - 77A2 146
12.0 1 757 1.7 120.03 2KJ1506 - 7FM13 - 77X1 146
13.2 1 589 1.9 108.52 ★ 2KJ1506 - 7FM13 - 77W1 146
14.4 1 463 2.1 99.9 2KJ1506 - 7FM13 - 77V1 146
16.0 1 316 2.3 89.85 ★ 2KJ1506 - 7FM13 - 77U1 146
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/33

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
2.2 K.88-LA100ZLP4E
11.0 1 915 0.86 130.77 ★ 2KJ1505 - 7FM13 - 77D2 92
11.9 1 763 0.94 120.42 2KJ1505 - 7FM13 - 77C2 92
12.9 1 631 1.0 111.37 ★ 2KJ1505 - 7FM13 - 77B2 92
13.9 1 514 1.1 103.38 2KJ1505 - 7FM13 - 77A2 92
15.7 1 336 1.2 91.22 ★ 2KJ1505 - 7FM13 - 77X1 92
17.0 1 233 1.3 84.21 2KJ1505 - 7FM13 - 77W1 92
19.0 1 105 1.5 75.45 ★ 2KJ1505 - 7FM13 - 77V1 92
21 1 019 1.6 69.57 2KJ1505 - 7FM13 - 77U1 92
4 25 855 1.9 58.37 2KJ1505 - 7FM13 - 77T1 92
29 729 2.3 49.8 ★ 2KJ1505 - 7FM13 - 77S1 92
K.68-LA100ZLP4E
21 1 022 0.80 69.78 2KJ1504 - 7FM13 - 77A2 62
23 931 0.88 63.57 ★ 2KJ1504 - 7FM13 - 77X1 62
25 853 0.96 58.23 2KJ1504 - 7FM13 - 77W1 62
28 761 1.1 51.96 ★ 2KJ1504 - 7FM13 - 77V1 62
31 679 1.2 46.37 2KJ1504 - 7FM13 - 77U1 62
36 577 1.4 39.39 2KJ1504 - 7FM13 - 77T1 62
44 480 1.7 32.78 ★ 2KJ1504 - 7FM13 - 77S1 62
47 445 1.8 30.38 2KJ1504 - 7FM13 - 77R1 62
51 410 2.0 27.99 ★ 2KJ1504 - 7FM13 - 77Q1 62
56 372 2.2 25.42 2KJ1504 - 7FM13 - 77P1 62
62 339 2.4 23.16 ★ 2KJ1504 - 7FM13 - 77N1 62
68 311 2.6 21.22 2KJ1504 - 7FM13 - 77M1 62
76 277 3.0 18.93 ★ 2KJ1504 - 7FM13 - 77L1 62
85 247 3.3 16.89 2KJ1504 - 7FM13 - 77K1 62
126 167 2.6 11.41 2KJ1504 - 7FM13 - 77G1 62
138 152 2.8 10.4 ★ 2KJ1504 - 7FM13 - 77F1 62
151 139 2.9 9.52 2KJ1504 - 7FM13 - 77E1 62
169 124 3.2 8.5 ★ 2KJ1504 - 7FM13 - 77D1 62
189 111 3.5 7.58 2KJ1504 - 7FM13 - 77C1 62
223 94 3.9 6.44 2KJ1504 - 7FM13 - 77B1 62
268 78 4.4 5.36 ★ 2KJ1504 - 7FM13 - 77A1 62
K.48-LA100ZLP4E
38 546 0.82 37.28 ★ 2KJ1503 - 7FM13 - 77S1 43
43 492 0.91 33.6 2KJ1503 - 7FM13 - 77R1 43
50 423 1.1 28.9 ★ 2KJ1503 - 7FM13 - 77Q1 43
52 403 1.1 27.55 ★ 2KJ1503 - 7FM13 - 77P1 43
58 364 1.2 24.85 2KJ1503 - 7FM13 - 77N1 43
64 330 1.4 22.54 ★ 2KJ1503 - 7FM13 - 77M1 43
70 301 1.5 20.54 2KJ1503 - 7FM13 - 77L1 43
76 275 1.6 18.78 ★ 2KJ1503 - 7FM13 - 77K1 43
86 246 1.8 16.79 2KJ1503 - 7FM13 - 77J1 43
93 226 2.0 15.42 ★ 2KJ1503 - 7FM13 - 77H1 43
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/34 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
2.2 K.48-LA100ZLP4E
103 204 2.2 13.9 2KJ1503 - 7FM13 - 77G1 43
120 175 2.4 11.95 ★ 2KJ1503 - 7FM13 - 77F1 43
126 166 1.8 11.35 ★ 2KJ1503 - 7FM13 - 77E1 43
141 149 1.9 10.15 2KJ1503 - 7FM13 - 77D1 43
154 136 2.0 9.32 ★ 2KJ1503 - 7FM13 - 77C1 43
171 123 2.2 8.4 2KJ1503 - 7FM13 - 77B1 43
199 106 2.4 7.22 ★ 2KJ1503 - 7FM13 - 77A1 43
K.38-LA100ZLP4E
98 215 0.84 14.69 ★ 2KJ1502 - 7FM13 - 77K1 39 4
113 185 0.93 12.65 2KJ1502 - 7FM13 - 77J1 39
125 168 0.99 11.5 ★ 2KJ1502 - 7FM13 - 77H1 39
134 157 1.0 10.72 ★ 2KJ1502 - 7FM13 - 77G1 39
148 142 1.1 9.72 2KJ1502 - 7FM13 - 77F1 39
162 130 1.2 8.85 ★ 2KJ1502 - 7FM13 - 77E1 39
184 114 1.4 7.82 2KJ1502 - 7FM13 - 77D1 39
199 106 1.5 7.22 ★ 2KJ1502 - 7FM13 - 77C1 39
231 91 1.7 6.22 2KJ1502 - 7FM13 - 77B1 39
254 83 1.8 5.65 ★ 2KJ1502 - 7FM13 - 77A1 39
B.38-LA100ZLP4E
78 268 0.84 18.33 2KJ1501 - 7FM13 - 77H2 41
86 245 0.90 16.7 2KJ1501 - 7FM13 - 77G2 41
94 224 0.96 15.28 2KJ1501 - 7FM13 - 77F2 41
105 200 1.0 13.66 2KJ1501 - 7FM13 - 77E2 41
115 183 1.2 12.5 2KJ1501 - 7FM13 - 77C2 41
130 162 1.4 11.05 2KJ1501 - 7FM13 - 77A2 41
143 147 1.5 10.02 2KJ1501 - 7FM13 - 77X1 41
162 129 1.8 8.84 2KJ1501 - 7FM13 - 77U1 41
180 117 2.0 7.98 2KJ1501 - 7FM13 - 77S1 41
198 106 2.2 7.24 2KJ1501 - 7FM13 - 77R1 41
218 96 2.4 6.59 2KJ1501 - 7FM13 - 77P1 41
238 88 2.7 6.03 2KJ1501 - 7FM13 - 77M1 41
266 79 2.7 5.39 2KJ1501 - 7FM13 - 77K1 41
290 72 3.0 4.95 2KJ1501 - 7FM13 - 77H1 41
322 65 3.3 4.46 2KJ1501 - 7FM13 - 77F1 41
374 56 3.6 3.84 2KJ1501 - 7FM13 - 77C1 41
3 K.188-Z68-LA100ZLD4E
1.1 23 639 0.85 1 286 ★ 2KJ1541 - 7FP13 - 7 7E1 765
1.3 20 863 0.96 1 135 2KJ1541 - 7FP13 - 7 7D1 765
1.5 17 794 1.1 968 ★ 2KJ1541 - 7FP13 - 7 7C1 765
1.8 14 834 1.3 807 2KJ1541 - 7FP13 - 7 7B1 765
2.1 12 298 1.6 669 ★ 2KJ1541 - 7FP13 - 7 7A1 765
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/35

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
3 K.188-Z88-LA100ZLD4E
2.1 12 298 1.6 669 ★ 2KJ1543 - 7FP13 - 7 7H1 798
2.6 10 073 2.0 548 ★ 2KJ1543 - 7FP13 - 7 7G1 798
K.168-Z68-LA100ZLD4E
1.6 16 194 0.83 881 2KJ1540 - 7FP13 - 7 7G1 521
2.0 13 511 1.0 735 2KJ1540 - 7FP13 - 7 7F1 521
K.168-LA132MA8
2.4 11 785 1.1 287.95 ★ 2KJ1510 - 7HG13 - 77H2 P02 527
2.6 10 813 1.2 264.18 2KJ1510 - 7HG13 - 77G2 P02 527
4 2.9 9 978 1.4 243.8 ★ 2KJ1510 - 7HG13 - 77F2 P02 527
3.1 9 256 1.5 226.15 2KJ1510 - 7HG13 - 77E2 P02 527
K.168-LA132SB6E
3.3 8 684 1.6 287.95 ★ 2KJ1510 - 7HF13 - 77 H2 P01 527
3.6 7 967 1.7 264.18 2KJ1510 - 7HF13 - 77 G2 P01 527
3.9 7 352 1.8 243.8 ★ 2KJ1510 - 7HF13 - 77 F2 P01 527
4.2 6 820 2.0 226.15 2KJ1510 - 7HF13 - 77 E2 P01 527
K.148-LA132MA8
3.0 9 493 0.84 231.95 ★ 2KJ1508 - 7HG13 - 77K2 P02 342
K.148-LA132SB6E
3.5 8 276 0.97 274.42 ★ 2KJ1508 - 7HF13 - 77 M2 P01 342
3.8 7 586 1.1 251.55 2KJ1508 - 7HF13 - 77 L2 P01 342
4.1 6 995 1.1 231.95 ★ 2KJ1508 - 7HF13 - 77 K2 P01 342
4.4 6 483 1.2 214.96 2KJ1508 - 7HF13 - 77 J2 P01 342
K.148-LA100ZLD4E
4.7 6 111 1.3 306.08 2KJ1508 - 7FP13 - 7 7N2 317
5.2 5 479 1.5 274.42 ★ 2KJ1508 - 7FP13 - 7 7M2 317
5.7 5 022 1.6 251.55 2KJ1508 - 7FP13 - 7 7L2 317
6.2 4 631 1.7 231.95 ★ 2KJ1508 - 7FP13 - 7 7K2 317
6.7 4 292 1.9 214.96 2KJ1508 - 7FP13 - 7 7J2 317
7.0 4 080 2.0 204.38 ★ 2KJ1508 - 7FP13 - 7 7H2 317
7.5 3 814 2.1 191.02 2KJ1508 - 7FP13 - 7 7G2 317
K.128-LA100ZLD4E
4.9 5 897 0.80 295.38 ★ 2KJ1507 - 7FP13 - 7 7L2 217
5.3 5 409 0.87 270.9 2KJ1507 - 7FP13 - 7 7K2 217
5.9 4 832 0.97 242.02 ★ 2KJ1507 - 7FP13 - 7 7J2 217
6.5 4 425 1.1 221.64 2KJ1507 - 7FP13 - 7 7H2 217
7.0 4 076 1.2 204.18 ★ 2KJ1507 - 7FP13 - 7 7G2 217
7.6 3 774 1.2 189.04 2KJ1507 - 7FP13 - 7 7F2 217
8.2 3 510 1.3 175.8 ★ 2KJ1507 - 7FP13 - 7 7E2 217
8.7 3 276 1.4 164.11 2KJ1507 - 7FP13 - 7 7D2 217
9.8 2 932 1.6 146.84 ★ 2KJ1507 - 7FP13 - 7 7C2 217
10.5 2 716 1.7 136.06 2KJ1507 - 7FP13 - 7 7B2 217
11.5 2 490 1.9 124.73 ★ 2KJ1507 - 7FP13 - 7 7A2 217
12.6 2 283 2.1 114.34 2KJ1507 - 7FP13 - 7 7X1 217
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/36 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
3 K.108-LA100ZLD4E
8.0 3 572 0.84 178.9 ★ 2KJ1506 - 7FP13 - 7 7E2 146
8.8 3 265 0.92 163.51 2KJ1506 - 7FP13 - 7 7D2 146
9.5 3 001 1.0 150.31 ★ 2KJ1506 - 7FP13 - 7 7C2 146
10.3 2 773 1.1 138.87 2KJ1506 - 7FP13 - 7 7B2 146
11.1 2 573 1.2 128.86 ★ 2KJ1506 - 7FP13 - 7 7A2 146
12.0 2 396 1.3 120.03 2KJ1506 - 7FP13 - 7 7X1 146
13.2 2 167 1.4 108.52 ★ 2KJ1506 - 7FP13 - 7 7W1 146
14.4 1 995 1.5 99.9 2KJ1506 - 7FP13 - 7 7V1 146
16.0 1 794 1.7 89.85 ★ 2KJ1506 - 7FP13 - 7 7U1 146 4
17.3 1 655 1.8 82.9 2KJ1506 - 7FP13 - 7 7T1 146
20 1 402 2.1 70.24 2KJ1506 - 7FP13 - 7 7S1 146
K.88-LA100ZLD4E
13.9 2 064 0.80 103.38 2KJ1505 - 7FP13 - 7 7A2 92
15.7 1 821 0.91 91.22 ★ 2KJ1505 - 7FP13 - 7 7X1 92
17.0 1 681 0.98 84.21 2KJ1505 - 7FP13 - 7 7W1 92
19.0 1 506 1.1 75.45 ★ 2KJ1505 - 7FP13 - 7 7V1 92
21 1 389 1.2 69.57 2KJ1505 - 7FP13 - 7 7U1 92
25 1 165 1.4 58.37 2KJ1505 - 7FP13 - 7 7T1 92
29 994 1.7 49.8 ★ 2KJ1505 - 7FP13 - 7 7S1 92
35 829 2.0 41.5 2KJ1505 - 7FP13 - 7 7Q1 92
42 687 2.4 34.4 ★ 2KJ1505 - 7FP13 - 7 7P1 92
46 616 2.7 30.87 ★ 2KJ1505 - 7FP13 - 7 7N1 92
128 224 3.6 11.21 2KJ1505 - 7FP13 - 7 7E1 92
K.68-LA100ZLD4E
31 926 0.89 46.37 2KJ1504 - 7FP13 - 7 7U1 62
36 786 1.0 39.39 2KJ1504 - 7FP13 - 7 7T1 62
44 654 1.3 32.78 ★ 2KJ1504 - 7FP13 - 7 7S1 62
47 607 1.4 30.38 2KJ1504 - 7FP13 - 7 7R1 62
51 559 1.5 27.99 ★ 2KJ1504 - 7FP13 - 7 7Q1 62
56 508 1.6 25.42 2KJ1504 - 7FP13 - 7 7P1 62
62 462 1.8 23.16 ★ 2KJ1504 - 7FP13 - 7 7N1 62
68 424 1.9 21.22 2KJ1504 - 7FP13 - 7 7M1 62
76 378 2.2 18.93 ★ 2KJ1504 - 7FP13 - 7 7L1 62
85 337 2.4 16.89 2KJ1504 - 7FP13 - 7 7K1 62
100 286 2.8 14.35 2KJ1504 - 7FP13 - 7 7J1 62
120 238 3.2 11.94 ★ 2KJ1504 - 7FP13 - 7 7H1 62
126 228 1.9 11.41 2KJ1504 - 7FP13 - 7 7G1 62
138 208 2.0 10.4 ★ 2KJ1504 - 7FP13 - 7 7F1 62
151 190 2.2 9.52 2KJ1504 - 7FP13 - 7 7E1 62
169 170 2.3 8.5 ★ 2KJ1504 - 7FP13 - 7 7D1 62
189 151 2.5 7.58 2KJ1504 - 7FP13 - 7 7C1 62
223 129 2.8 6.44 2KJ1504 - 7FP13 - 7 7B1 62
268 107 3.2 5.36 ★ 2KJ1504 - 7FP13 - 7 7A1 62
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/37

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
3 K.48-LA100ZLD4E
52 550 0.82 27.55 ★ 2KJ1503 - 7FP13 - 7 7P1 43
58 496 0.91 24.85 2KJ1503 - 7FP13 - 7 7N1 43
64 450 1.0 22.54 ★ 2KJ1503 - 7FP13 - 7 7M1 43
70 410 1.1 20.54 2KJ1503 - 7FP13 - 7 7L1 43
76 375 1.2 18.78 ★ 2KJ1503 - 7FP13 - 7 7K1 43
86 335 1.3 16.79 2KJ1503 - 7FP13 - 7 7J1 43
93 308 1.5 15.42 ★ 2KJ1503 - 7FP13 - 7 7H1 43
103 278 1.6 13.9 2KJ1503 - 7FP13 - 7 7G1 43
4 120 239 1.8 11.95 ★ 2KJ1503 - 7FP13 - 7 7F1 43
126 227 1.3 11.35 ★ 2KJ1503 - 7FP13 - 7 7E1 43
141 203 1.4 10.15 2KJ1503 - 7FP13 - 7 7D1 43
154 186 1.5 9.32 ★ 2KJ1503 - 7FP13 - 7 7C1 43
171 168 1.6 8.4 2KJ1503 - 7FP13 - 7 7B1 43
199 144 1.8 7.22 ★ 2KJ1503 - 7FP13 - 7 7A1 43
K.38-LA100ZLD4E
148 194 0.82 9.72 2KJ1502 - 7FP13 - 7 7F1 39
162 177 0.90 8.85 ★ 2KJ1502 - 7FP13 - 7 7E1 39
184 156 1.0 7.82 2KJ1502 - 7FP13 - 7 7D1 39
199 144 1.1 7.22 ★ 2KJ1502 - 7FP13 - 7 7C1 39
231 124 1.2 6.22 2KJ1502 - 7FP13 - 7 7B1 39
254 113 1.3 5.65 ★ 2KJ1502 - 7FP13 - 7 7A1 39
B.38-LA100ZLD4E
115 250 0.88 12.5 2KJ1501 - 7FP13 - 7 7C2 41
130 221 1.0 11.05 2KJ1501 - 7FP13 - 7 7A2 41
143 200 1.1 10.02 2KJ1501 - 7FP13 - 7 7X1 41
162 176 1.3 8.84 2KJ1501 - 7FP13 - 7 7U1 41
180 159 1.5 7.98 2KJ1501 - 7FP13 - 7 7S1 41
198 145 1.6 7.24 2KJ1501 - 7FP13 - 7 7R1 41
218 132 1.8 6.59 2KJ1501 - 7FP13 - 7 7P1 41
238 120 2.0 6.03 2KJ1501 - 7FP13 - 7 7M1 41
266 108 2.0 5.39 2KJ1501 - 7FP13 - 7 7K1 41
290 99 2.2 4.95 2KJ1501 - 7FP13 - 7 7H1 41
322 89 2.4 4.46 2KJ1501 - 7FP13 - 7 7F1 41
374 77 2.6 3.84 2KJ1501 - 7FP13 - 7 7C1 41
B.28-LA100ZLD4E
257 111 0.81 5.58 2KJ1500 - 7FP13 - 7 7E1 29
290 99 0.91 4.94 2KJ1500 - 7FP13 - 7 7D1 29
315 91 0.96 4.56 2KJ1500 - 7FP13 - 7 7C1 29
366 78 1.0 3.92 2KJ1500 - 7FP13 - 7 7B1 29
402 71 1.1 3.57 2KJ1500 - 7FP13 - 7 7A1 29
4 K.188-Z68-LA112ZMP4E
1.5 23 702 0.84 968 ★ 2KJ1541 - 7GJ13 - 7 7C1 772
1.8 19 760 1.0 807 2KJ1541 - 7GJ13 - 7 7B1 772
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/38 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
4 K.188-Z68-LA112ZMP4E
2.2 16 381 1.2 669 ★ 2KJ1541 - 7GJ13 - 7 7A1 772
K.188-Z88-LA112ZMP4E
2.2 16 381 1.2 669 ★ 2KJ1543 - 7GJ13 - 7 7H1 805
2.6 13 418 1.5 548 ★ 2KJ1543 - 7GJ13 - 7 7G1 805
2.9 12 316 1.6 503 2KJ1543 - 7GJ13 - 7 7F1 805
3.4 10 504 1.9 429 ★ 2KJ1543 - 7GJ13 - 7 7E1 805
K.188-LA160M8
3.7 10 223 2.0 191.34 2KJ1511 - 7JE13 - 77 U1 P02 800
K.168-LA132ZMB6E 4
3.3 11 579 1.2 287.95 ★ 2KJ1510 - 7HJ13 - 7 7H2 P01 527
3.6 10 623 1.3 264.18 2KJ1510 - 7HJ13 - 7 7G2 P01 527
3.9 9 803 1.4 243.8 ★ 2KJ1510 - 7HJ13 - 7 7F2 P01 527
4.2 9 094 1.5 226.15 2KJ1510 - 7HJ13 - 7 7E2 P01 527
4.5 8 578 1.6 213.33 ★ 2KJ1510 - 7HJ13 - 7 7D2 P01 527
4.8 8 024 1.7 199.54 2KJ1510 - 7HJ13 - 7 7C2 P01 527
K.148-LA132ZMB6E
4.1 9 327 0.86 231.95 ★ 2KJ1508 - 7HJ13 - 7 7K2 P01 342
4.4 8 644 0.93 214.96 2KJ1508 - 7HJ13 - 7 7J2 P01 342
K.148-LA112ZMP4E
4.7 8 120 0.99 306.08 2KJ1508 - 7GJ13 - 7 7N2 324
5.2 7 280 1.1 274.42 ★ 2KJ1508 - 7GJ13 - 7 7M2 324
5.7 6 673 1.2 251.55 2KJ1508 - 7GJ13 - 7 7L2 324
6.2 6 153 1.3 231.95 ★ 2KJ1508 - 7GJ13 - 7 7K2 324
6.7 5 702 1.4 214.96 2KJ1508 - 7GJ13 - 7 7J2 324
7.0 5 422 1.5 204.38 ★ 2KJ1508 - 7GJ13 - 7 7H2 324
7.5 5 067 1.6 191.02 2KJ1508 - 7GJ13 - 7 7G2 324
8.5 4 470 1.8 168.5 ★ 2KJ1508 - 7GJ13 - 7 7F2 324
9.1 4 216 1.9 158.93 2KJ1508 - 7GJ13 - 7 7E2 324
10.1 3 778 2.1 142.41 ★ 2KJ1508 - 7GJ13 - 7 7D2 324
K.128-LA112ZMP4E
6.5 5 880 0.80 221.64 2KJ1507 - 7GJ13 - 7 7H2 224
7.1 5 416 0.87 204.18 ★ 2KJ1507 - 7GJ13 - 7 7G2 224
7.6 5 015 0.94 189.04 2KJ1507 - 7GJ13 - 7 7F2 224
8.2 4 664 1.0 175.8 ★ 2KJ1507 - 7GJ13 - 7 7E2 224
8.8 4 353 1.1 164.11 2KJ1507 - 7GJ13 - 7 7D2 224
9.8 3 895 1.2 146.84 ★ 2KJ1507 - 7GJ13 - 7 7C2 224
10.6 3 609 1.3 136.06 2KJ1507 - 7GJ13 - 7 7B2 224
11.5 3 309 1.4 124.73 ★ 2KJ1507 - 7GJ13 - 7 7A2 224
12.6 3 033 1.5 114.34 2KJ1507 - 7GJ13 - 7 7X1 224
14.8 2 585 1.8 97.44 2KJ1507 - 7GJ13 - 7 7W1 224
16.7 2 281 2.1 85.98 ★ 2KJ1507 - 7GJ13 - 7 7V1 224
K.108-LA112ZMP4E
10.4 3 684 0.81 138.87 2KJ1506 - 7GJ13 - 7 7B2 153
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/39

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
4 K.108-LA112ZMP4E
11.2 3 418 0.88 128.86 ★ 2KJ1506 - 7GJ13 - 7 7A2 153
12.0 3 184 0.94 120.03 2KJ1506 - 7GJ13 - 7 7X1 153
13.3 2 879 1.0 108.52 ★ 2KJ1506 - 7GJ13 - 7 7W1 153
14.4 2 650 1.1 99.9 2KJ1506 - 7GJ13 - 7 7V1 153
16.0 2 384 1.3 89.85 ★ 2KJ1506 - 7GJ13 - 7 7U1 153
17.4 2 199 1.4 82.9 2KJ1506 - 7GJ13 - 7 7T1 153
20 1 863 1.6 70.24 2KJ1506 - 7GJ13 - 7 7S1 153
24 1 624 1.8 61.22 ★ 2KJ1506 - 7GJ13 - 7 7R1 153
4 28 1 382 2.2 52.08 2KJ1506 - 7GJ13 - 7 7Q1 153
32 1 179 2.5 44.44 ★ 2KJ1506 - 7GJ13 - 7 7P1 153
K.88-LA112ZMP4E
19.1 2 002 0.82 75.45 ★ 2KJ1505 - 7GJ13 - 7 7V1 99
21 1 846 0.89 69.57 2KJ1505 - 7GJ13 - 7 7U1 99
25 1 548 1.1 58.37 2KJ1505 - 7GJ13 - 7 7T1 99
29 1 321 1.2 49.8 ★ 2KJ1505 - 7GJ13 - 7 7S1 99
35 1 101 1.5 41.5 2KJ1505 - 7GJ13 - 7 7Q1 99
42 913 1.8 34.4 ★ 2KJ1505 - 7GJ13 - 7 7P1 99
47 819 2.0 30.87 ★ 2KJ1505 - 7GJ13 - 7 7N1 99
50 756 2.2 28.5 2KJ1505 - 7GJ13 - 7 7M1 99
56 677 2.4 25.53 ★ 2KJ1505 - 7GJ13 - 7 7L1 99
61 624 2.6 23.54 2KJ1505 - 7GJ13 - 7 7K1 99
73 524 3.0 19.75 2KJ1505 - 7GJ13 - 7 7J1 99
128 297 2.7 11.21 2KJ1505 - 7GJ13 - 7 7E1 99
153 250 3.1 9.41 2KJ1505 - 7GJ13 - 7 7D1 99
179 213 3.4 8.03 ★ 2KJ1505 - 7GJ13 - 7 7C1 99
215 177 3.9 6.69 2KJ1505 - 7GJ13 - 7 7B1 99
260 147 4.4 5.54 ★ 2KJ1505 - 7GJ13 - 7 7A1 99
K.68-LA112ZMP4E
44 870 0.94 32.78 ★ 2KJ1504 - 7GJ13 - 7 7S1 69
47 806 1.0 30.38 2KJ1504 - 7GJ13 - 7 7R1 69
51 743 1.1 27.99 ★ 2KJ1504 - 7GJ13 - 7 7Q1 69
57 674 1.2 25.42 2KJ1504 - 7GJ13 - 7 7P1 69
62 614 1.3 23.16 ★ 2KJ1504 - 7GJ13 - 7 7N1 69
68 563 1.5 21.22 2KJ1504 - 7GJ13 - 7 7M1 69
76 502 1.6 18.93 ★ 2KJ1504 - 7GJ13 - 7 7L1 69
85 448 1.8 16.89 2KJ1504 - 7GJ13 - 7 7K1 69
100 381 2.1 14.35 2KJ1504 - 7GJ13 - 7 7J1 69
121 317 2.4 11.94 ★ 2KJ1504 - 7GJ13 - 7 7H1 69
126 303 1.4 11.41 2KJ1504 - 7GJ13 - 7 7G1 69
138 276 1.5 10.4 ★ 2KJ1504 - 7GJ13 - 7 7F1 69
151 253 1.6 9.52 2KJ1504 - 7GJ13 - 7 7E1 69
169 225 1.8 8.5 ★ 2KJ1504 - 7GJ13 - 7 7D1 69
190 201 1.9 7.58 2KJ1504 - 7GJ13 - 7 7C1 69
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/40 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
4 K.68-LA112ZMP4E
224 171 2.1 6.44 2KJ1504 - 7GJ13 - 7 7B1 69
269 142 2.4 5.36 ★ 2KJ1504 - 7GJ13 - 7 7A1 69
K.48-LA112ZMP4E
70 545 0.83 20.54 2KJ1503 - 7GJ13 - 7 7L1 50
77 498 0.90 18.78 ★ 2KJ1503 - 7GJ13 - 7 7K1 50
86 445 1.0 16.79 2KJ1503 - 7GJ13 - 7 7J1 50
93 409 1.1 15.42 ★ 2KJ1503 - 7GJ13 - 7 7H1 50
104 369 1.2 13.9 2KJ1503 - 7GJ13 - 7 7G1 50
121 317 1.3 11.95 ★ 2KJ1503 - 7GJ13 - 7 7F1 50 4
127 301 0.97 11.35 ★ 2KJ1503 - 7GJ13 - 7 7E1 50
142 269 1.1 10.15 2KJ1503 - 7GJ13 - 7 7D1 50
155 247 1.1 9.32 ★ 2KJ1503 - 7GJ13 - 7 7C1 50
171 223 1.2 8.4 2KJ1503 - 7GJ13 - 7 7B1 50
199 192 1.3 7.22 ★ 2KJ1503 - 7GJ13 - 7 7A1 50
K.38-LA112ZMP4E
199 192 0.83 7.22 ★ 2KJ1502 - 7GJ13 - 7 7C1 46
232 165 0.92 6.22 2KJ1502 - 7GJ13 - 7 7B1 46
255 150 0.99 5.65 ★ 2KJ1502 - 7GJ13 - 7 7A1 46
5.5 K.188-Z68-LA132SP4E
2.2 22 492 0.89 669 ★ 2KJ1541 - 7HG13 - 77A1 790
K.188-Z88-LA132SP4E
2.2 22 492 0.89 669 ★ 2KJ1543 - 7HG13 - 77H1 823
2.6 18 424 1.1 548 ★ 2KJ1543 - 7HG13 - 77G1 823
2.9 16 911 1.2 503 2KJ1543 - 7HG13 - 77F1 823
3.4 14 423 1.4 429 ★ 2KJ1543 - 7HG13 - 77E1 823
K.188-LA160MB8
3.7 14 155 1.4 191.34 2KJ1511 - 7JF13 - 77 U1 P02 800
4.1 12 782 1.6 172.78 2KJ1511 - 7JF13 - 77 T1 P02 800
4.4 11 979 1.7 161.92 2KJ1511 - 7JF13 - 77 S1 P02 800
K.188-LA132ZMD6E
5.0 10 469 1.9 191.34 2KJ1511 - 7HK13 - 77U1 P01 776
5.6 9 453 2.1 172.78 2KJ1511 - 7HK13 - 77T1 P01 776
K.168-LA132ZMD6E
3.3 15 755 0.86 287.95 ★ 2KJ1510 - 7HK13 - 77H2 P01 527
3.6 14 454 0.93 264.18 2KJ1510 - 7HK13 - 77G2 P01 527
3.9 13 339 1.0 243.8 ★ 2KJ1510 - 7HK13 - 77F2 P01 527
4.2 12 373 1.1 226.15 2KJ1510 - 7HK13 - 77E2 P01 527
4.5 11 672 1.2 213.33 ★ 2KJ1510 - 7HK13 - 77D2 P01 527
4.8 10 918 1.2 199.54 2KJ1510 - 7HK13 - 77C2 P01 527
K.168-LA132SP4E
5.0 10 467 1.3 287.95 ★ 2KJ1510 - 7HG13 - 77H2 527
5.5 9 603 1.4 264.18 2KJ1510 - 7HG13 - 77G2 527
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/41

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
5.5 K.168-LA132SP4E
5.9 8 862 1.5 243.8 ★ 2KJ1510 - 7HG13 - 77F2 527
6.4 8 220 1.6 226.15 2KJ1510 - 7HG13 - 77E2 527
6.8 7 754 1.7 213.33 ★ 2KJ1510 - 7HG13 - 77D2 527
7.2 7 253 1.9 199.54 2KJ1510 - 7HG13 - 77C2 527
8.1 6 449 2.1 177.43 ★ 2KJ1510 - 7HG13 - 77B2 527
K.148-LA132SP4E
5.3 9 975 0.80 274.42 ★ 2KJ1508 - 7HG13 - 77M2 342
5.7 9 144 0.87 251.55 2KJ1508 - 7HG13 - 77L2 342
4 6.2 8 431 0.95 231.95 ★ 2KJ1508 - 7HG13 - 77K2 342
6.7 7 814 1.0 214.96 2KJ1508 - 7HG13 - 77J2 342
7.1 7 429 1.1 204.38 ★ 2KJ1508 - 7HG13 - 77H2 342
7.6 6 943 1.2 191.02 2KJ1508 - 7HG13 - 77G2 342
8.6 6 125 1.3 168.5 ★ 2KJ1508 - 7HG13 - 77F2 342
9.1 5 777 1.4 158.93 2KJ1508 - 7HG13 - 77E2 342
10.1 5 177 1.5 142.41 ★ 2KJ1508 - 7HG13 - 77D2 342
11.0 4 780 1.7 131.49 2KJ1508 - 7HG13 - 77C2 342
12.9 4 084 2.0 112.35 2KJ1508 - 7HG13 - 77B2 342
14.2 3 691 2.2 101.53 ★ 2KJ1508 - 7HG13 - 77A2 342
14.8 3 556 2.2 97.82 2KJ1508 - 7HG13 - 77X1 342
K.128-LA132SP4E
9.8 5 338 0.88 146.84 ★ 2KJ1507 - 7HG13 - 77C2 242
10.6 4 946 0.95 136.06 2KJ1507 - 7HG13 - 77B2 242
11.6 4 534 1.0 124.73 ★ 2KJ1507 - 7HG13 - 77A2 242
12.6 4 156 1.1 114.34 2KJ1507 - 7HG13 - 77X1 242
14.8 3 542 1.3 97.44 2KJ1507 - 7HG13 - 77W1 242
16.8 3 125 1.5 85.98 ★ 2KJ1507 - 7HG13 - 77V1 242
19.7 2 660 1.8 73.18 2KJ1507 - 7HG13 - 77U1 242
23 2 305 2.0 63.41 ★ 2KJ1507 - 7HG13 - 77T1 242
27 1 940 2.4 53.36 ★ 2KJ1507 - 7HG13 - 77S1 242
K.108-LA132SP4E
14.5 3 631 0.83 99.9 2KJ1506 - 7HG13 - 77V1 171
16.1 3 266 0.92 89.85 ★ 2KJ1506 - 7HG13 - 77U1 171
17.4 3 013 1.0 82.9 2KJ1506 - 7HG13 - 77T1 171
21 2 553 1.2 70.24 2KJ1506 - 7HG13 - 77S1 171
24 2 225 1.3 61.22 ★ 2KJ1506 - 7HG13 - 77R1 171
28 1 893 1.6 52.08 2KJ1506 - 7HG13 - 77Q1 171
32 1 615 1.9 44.44 ★ 2KJ1506 - 7HG13 - 77P1 171
40 1 325 2.1 36.44 ★ 2KJ1506 - 7HG13 - 77N1 171
43 1 231 2.4 33.87 ★ 2KJ1506 - 7HG13 - 77M1 171
46 1 136 2.6 31.25 2KJ1506 - 7HG13 - 77L1 171
K.88-LA132SP4E
29 1 810 0.91 49.8 ★ 2KJ1505 - 7HG13 - 77S1 117
35 1 509 1.1 41.5 2KJ1505 - 7HG13 - 77Q1 117
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/42 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
5.5 K.88-LA132SP4E
42 1 250 1.3 34.4 ★ 2KJ1505 - 7HG13 - 77P1 117
47 1 122 1.5 30.87 ★ 2KJ1505 - 7HG13 - 77N1 117
51 1 036 1.6 28.5 2KJ1505 - 7HG13 - 77M1 117
57 928 1.8 25.53 ★ 2KJ1505 - 7HG13 - 77L1 117
61 856 1.9 23.54 2KJ1505 - 7HG13 - 77K1 117
73 718 2.2 19.75 2KJ1505 - 7HG13 - 77J1 117
86 612 2.4 16.85 ★ 2KJ1505 - 7HG13 - 77H1 117
103 510 2.8 14.04 2KJ1505 - 7HG13 - 77G1 117
124 423 3.2 11.64 ★ 2KJ1505 - 7HG13 - 77F1 117 4
129 407 2.0 11.21 2KJ1505 - 7HG13 - 77E1 117
154 342 2.2 9.41 2KJ1505 - 7HG13 - 77D1 117
180 292 2.5 8.03 ★ 2KJ1505 - 7HG13 - 77C1 117
216 243 2.8 6.69 2KJ1505 - 7HG13 - 77B1 117
261 201 3.2 5.54 ★ 2KJ1505 - 7HG13 - 77A1 117
K.68-LA132SP4E
52 1 017 0.81 27.99 ★ 2KJ1504 - 7HG13 - 77Q1 87
57 924 0.89 25.42 2KJ1504 - 7HG13 - 77P1 87
62 842 0.97 23.16 ★ 2KJ1504 - 7HG13 - 77N1 87
68 771 1.1 21.22 2KJ1504 - 7HG13 - 77M1 87
76 688 1.2 18.93 ★ 2KJ1504 - 7HG13 - 77L1 87
86 614 1.3 16.89 2KJ1504 - 7HG13 - 77K1 87
101 522 1.6 14.35 2KJ1504 - 7HG13 - 77J1 87
121 434 1.8 11.94 ★ 2KJ1504 - 7HG13 - 77H1 87
127 415 1.0 11.41 2KJ1504 - 7HG13 - 77G1 87
139 378 1.1 10.4 ★ 2KJ1504 - 7HG13 - 77F1 87
152 346 1.2 9.52 2KJ1504 - 7HG13 - 77E1 87
170 309 1.3 8.5 ★ 2KJ1504 - 7HG13 - 77D1 87
191 276 1.4 7.58 2KJ1504 - 7HG13 - 77C1 87
224 234 1.6 6.44 2KJ1504 - 7HG13 - 77B1 87
270 195 1.8 5.36 ★ 2KJ1504 - 7HG13 - 77A1 87
7.5 K.188-Z88-LA132ZMP4E
2.7 24 988 0.80 548 ★ 2KJ1543 - 7HK13 - 77G1 823
2.9 22 936 0.87 503 2KJ1543 - 7HK13 - 77F1 823
3.4 19 561 1.0 429 ★ 2KJ1543 - 7HK13 - 77E1 823
K.188-LA160LB8
3.7 19 167 1.0 191.34 2KJ1511 - 7JJ13 - 77U1 P02 812
4.1 17 308 1.2 172.78 2KJ1511 - 7JJ13 - 77T1 P02 812
4.4 16 220 1.2 161.92 2KJ1511 - 7JJ13 - 77S1 P02 812
K.188-LA160MD6E
5.0 14 202 1.4 191.34 2KJ1511 - 7JJ13 - 77U1 P01 812
5.6 12 824 1.6 172.78 2KJ1511 - 7JJ13 - 77T1 P01 812
6.0 12 018 1.7 161.92 2KJ1511 - 7JJ13 - 77S1 P01 812
6.9 10 323 1.9 139.08 ★ 2KJ1511 - 7JJ13 - 77R1 P01 812
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/43

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
7.5 K.188-LA132ZMP4E
7.6 9 419 2.1 191.34 2KJ1511 - 7HK13 - 77U1 776
K.168-LA160MD6E
4.5 15 834 0.85 213.33 ★ 2KJ1510 - 7JJ13 - 77D2 P01 563
4.8 14 810 0.91 199.54 2KJ1510 - 7JJ13 - 77C2 P01 563
K.168-LA132ZMP4E
5.1 14 175 0.95 287.95 ★ 2KJ1510 - 7HK13 - 77H2 527
5.5 13 005 1.0 264.18 2KJ1510 - 7HK13 - 77G2 527
6.0 12 001 1.1 243.8 ★ 2KJ1510 - 7HK13 - 77F2 527
4 6.4 11 133 1.2 226.15 2KJ1510 - 7HK13 - 77E2 527
6.8 10 502 1.3 213.33 ★ 2KJ1510 - 7HK13 - 77D2 527
7.3 9 823 1.4 199.54 2KJ1510 - 7HK13 - 77C2 527
8.2 8 734 1.5 177.43 ★ 2KJ1510 - 7HK13 - 77B2 527
8.7 8 245 1.6 167.5 2KJ1510 - 7HK13 - 77A2 527
9.7 7 402 1.8 150.36 ★ 2KJ1510 - 7HK13 - 77X1 527
10.5 6 793 2.0 138 2KJ1510 - 7HK13 - 77W1 527
K.148-LA132ZMP4E
7.1 10 061 0.80 204.38 ★ 2KJ1508 - 7HK13 - 77H2 342
7.6 9 403 0.85 191.02 2KJ1508 - 7HK13 - 77G2 342
8.6 8 295 0.96 168.5 ★ 2KJ1508 - 7HK13 - 77F2 342
9.2 7 824 1.0 158.93 2KJ1508 - 7HK13 - 77E2 342
10.2 7 010 1.1 142.41 ★ 2KJ1508 - 7HK13 - 77D2 342
11.1 6 473 1.2 131.49 2KJ1508 - 7HK13 - 77C2 342
13.0 5 531 1.4 112.35 2KJ1508 - 7HK13 - 77B2 342
14.3 4 998 1.6 101.53 ★ 2KJ1508 - 7HK13 - 77A2 342
14.9 4 815 1.7 97.82 2KJ1508 - 7HK13 - 77X1 342
17.2 4 165 1.9 84.61 2KJ1508 - 7HK13 - 77W1 342
19.7 3 633 2.2 73.8 ★ 2KJ1508 - 7HK13 - 77V1 342
K.128-LA132ZMP4E
12.7 5 629 0.84 114.34 2KJ1507 - 7HK13 - 77X1 242
14.9 4 797 0.98 97.44 2KJ1507 - 7HK13 - 77W1 242
16.9 4 233 1.1 85.98 ★ 2KJ1507 - 7HK13 - 77V1 242
19.9 3 602 1.3 73.18 2KJ1507 - 7HK13 - 77U1 242
23 3 121 1.5 63.41 ★ 2KJ1507 - 7HK13 - 77T1 242
27 2 627 1.8 53.36 ★ 2KJ1507 - 7HK13 - 77S1 242
30 2 370 2.0 48.14 2KJ1507 - 7HK13 - 77R1 242
35 2 037 2.3 41.38 ★ 2KJ1507 - 7HK13 - 77Q1 242
37 1 929 2.4 39.19 ★ 2KJ1507 - 7HK13 - 77P1 242
40 1 768 2.7 35.92 2KJ1507 - 7HK13 - 77N1 242
K.108-LA132ZMP4E
21 3 458 0.87 70.24 2KJ1506 - 7HK13 - 77S1 171
24 3 014 1.0 61.22 ★ 2KJ1506 - 7HK13 - 77R1 171
28 2 564 1.2 52.08 2KJ1506 - 7HK13 - 77Q1 171
33 2 188 1.4 44.44 ★ 2KJ1506 - 7HK13 - 77P1 171
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/44 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
7.5 K.108-LA132ZMP4E
40 1 794 1.6 36.44 ★ 2KJ1506 - 7HK13 - 77N1 171
43 1 667 1.8 33.87 ★ 2KJ1506 - 7HK13 - 77M1 171
47 1 538 2.0 31.25 2KJ1506 - 7HK13 - 77L1 171
55 1 304 2.2 26.48 2KJ1506 - 7HK13 - 77K1 171
63 1 136 2.4 23.08 ★ 2KJ1506 - 7HK13 - 77J1 171
74 966 2.7 19.63 2KJ1506 - 7HK13 - 77G1 171
87 825 3.0 16.75 ★ 2KJ1506 - 7HK13 - 77F1 171
106 676 3.5 13.74 ★ 2KJ1506 - 7HK13 - 77E1 171
113 635 3.1 12.9 ★ 2KJ1506 - 7HK13 - 77D1 171 4
133 540 3.4 10.97 2KJ1506 - 7HK13 - 77C1 171
155 461 3.8 9.36 ★ 2KJ1506 - 7HK13 - 77B1 171
K.88-LA132ZMP4E
35 2 043 0.81 41.5 2KJ1505 - 7HK13 - 77Q1 117
42 1 693 0.97 34.4 ★ 2KJ1505 - 7HK13 - 77P1 117
47 1 520 1.1 30.87 ★ 2KJ1505 - 7HK13 - 77N1 117
51 1 403 1.2 28.5 2KJ1505 - 7HK13 - 77M1 117
57 1 257 1.3 25.53 ★ 2KJ1505 - 7HK13 - 77L1 117
62 1 159 1.4 23.54 2KJ1505 - 7HK13 - 77K1 117
74 972 1.6 19.75 2KJ1505 - 7HK13 - 77J1 117
86 829 1.8 16.85 ★ 2KJ1505 - 7HK13 - 77H1 117
104 691 2.1 14.04 2KJ1505 - 7HK13 - 77G1 117
125 573 2.3 11.64 ★ 2KJ1505 - 7HK13 - 77F1 117
130 552 1.5 11.21 2KJ1505 - 7HK13 - 77E1 117
155 463 1.6 9.41 2KJ1505 - 7HK13 - 77D1 117
181 395 1.8 8.03 ★ 2KJ1505 - 7HK13 - 77C1 117
217 329 2.1 6.69 2KJ1505 - 7HK13 - 77B1 117
263 273 2.4 5.54 ★ 2KJ1505 - 7HK13 - 77A1 117
K.68-LA132ZMP4E
77 932 0.88 18.93 ★ 2KJ1504 - 7HK13 - 77L1 87
86 831 0.99 16.89 2KJ1504 - 7HK13 - 77K1 87
101 706 1.1 14.35 2KJ1504 - 7HK13 - 77J1 87
122 588 1.3 11.94 ★ 2KJ1504 - 7HK13 - 77H1 87
140 512 0.82 10.4 ★ 2KJ1504 - 7HK13 - 77F1 87
153 469 0.88 9.52 2KJ1504 - 7HK13 - 77E1 87
171 418 0.95 8.5 ★ 2KJ1504 - 7HK13 - 77D1 87
192 373 1.0 7.58 2KJ1504 - 7HK13 - 77C1 87
226 317 1.2 6.44 2KJ1504 - 7HK13 - 77B1 87
271 264 1.3 5.36 ★ 2KJ1504 - 7HK13 - 77A1 87
9.2 K.188-Z88-LA160MB4E
3.4 24 013 0.83 429 ★ 2KJ1543 - 7JP13 - 77 E1 847
K.188-LA160MB4E
7.6 11 554 1.7 191.34 2KJ1511 - 7JP13 - 77 U1 800
8.4 10 433 1.9 172.78 2KJ1511 - 7JP13 - 77 T1 800
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/45

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
9.2 K.188-LA160MB4E
9.0 9 778 2.0 161.92 2KJ1511 - 7JP13 - 77 S1 800
K.168-LA160MB4E
6.8 12 882 1.0 213.33 ★ 2KJ1510 - 7JP13 - 77 D2 551
7.3 12 049 1.1 199.54 2KJ1510 - 7JP13 - 77 C2 551
8.2 10 714 1.3 177.43 ★ 2KJ1510 - 7JP13 - 77 B2 551
8.7 10 114 1.3 167.5 2KJ1510 - 7JP13 - 77 A2 551
9.7 9 079 1.5 150.36 ★ 2KJ1510 - 7JP13 - 77 X1 551
10.5 8 333 1.6 138 2KJ1510 - 7JP13 - 77 W1 551
4 12.2 7 191 1.9 119.09 2KJ1510 - 7JP13 - 77 V1 551
14.0 6 291 2.1 104.18 2KJ1510 - 7JP13 - 77 U1 551
K.148-LA160MB4E
9.2 9 597 0.83 158.93 2KJ1508 - 7JP13 - 77 E2 366
10.2 8 599 0.93 142.41 ★ 2KJ1508 - 7JP13 - 77 D2 366
11.1 7 940 1.0 131.49 2KJ1508 - 7JP13 - 77 C2 366
13.0 6 784 1.2 112.35 2KJ1508 - 7JP13 - 77 B2 366
14.3 6 131 1.3 101.53 ★ 2KJ1508 - 7JP13 - 77 A2 366
14.9 5 907 1.4 97.82 2KJ1508 - 7JP13 - 77 X1 366
17.2 5 109 1.6 84.61 2KJ1508 - 7JP13 - 77 W1 366
19.7 4 456 1.8 73.8 ★ 2KJ1508 - 7JP13 - 77 V1 366
23 3 814 2.1 63.16 ★ 2KJ1508 - 7JP13 - 77 U1 366
26 3 416 2.3 56.57 2KJ1508 - 7JP13 - 77 T1 366
K.128-LA160MB4E
14.9 5 884 0.80 97.44 2KJ1507 - 7JP13 - 77 W1 266
16.9 5 192 0.91 85.98 ★ 2KJ1507 - 7JP13 - 77 V1 266
19.9 4 419 1.1 73.18 2KJ1507 - 7JP13 - 77 U1 266
23 3 829 1.2 63.41 ★ 2KJ1507 - 7JP13 - 77 T1 266
27 3 222 1.5 53.36 ★ 2KJ1507 - 7JP13 - 77 S1 266
30 2 907 1.6 48.14 2KJ1507 - 7JP13 - 77 R1 266
35 2 499 1.9 41.38 ★ 2KJ1507 - 7JP13 - 77 Q1 266
37 2 366 2.0 39.19 ★ 2KJ1507 - 7JP13 - 77 P1 266
40 2 169 2.2 35.92 2KJ1507 - 7JP13 - 77 N1 266
48 1 848 2.5 30.61 2KJ1507 - 7JP13 - 77 M1 266
54 1 632 2.9 27.02 ★ 2KJ1507 - 7JP13 - 77 L1 266
K.108-LA160MB4E
24 3 697 0.81 61.22 ★ 2KJ1506 - 7JP13 - 77 R1 195
28 3 145 0.95 52.08 2KJ1506 - 7JP13 - 77 Q1 195
33 2 684 1.1 44.44 ★ 2KJ1506 - 7JP13 - 77 P1 195
40 2 200 1.3 36.44 ★ 2KJ1506 - 7JP13 - 77 N1 195
43 2 045 1.5 33.87 ★ 2KJ1506 - 7JP13 - 77 M1 195
47 1 887 1.6 31.25 2KJ1506 - 7JP13 - 77 L1 195
55 1 599 1.8 26.48 2KJ1506 - 7JP13 - 77 K1 195
63 1 394 2.0 23.08 ★ 2KJ1506 - 7JP13 - 77 J1 195
74 1 185 2.2 19.63 2KJ1506 - 7JP13 - 77 G1 195
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/46 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
9.2 K.108-LA160MB4E
87 1 011 2.5 16.75 ★ 2KJ1506 - 7JP13 - 77 F1 195
106 830 2.8 13.74 ★ 2KJ1506 - 7JP13 - 77 E1 195
113 779 2.5 12.9 ★ 2KJ1506 - 7JP13 - 77 D1 195
133 662 2.8 10.97 2KJ1506 - 7JP13 - 77 C1 195
155 565 3.1 9.36 ★ 2KJ1506 - 7JP13 - 77 B1 195
189 464 3.6 7.68 ★ 2KJ1506 - 7JP13 - 77 A1 195
K.88-LA160MB4E
47 1 864 0.89 30.87 ★ 2KJ1505 - 7JP13 - 77 N1 141
51 1 721 0.96 28.5 2KJ1505 - 7JP13 - 77 M1 141 4
57 1 542 1.1 25.53 ★ 2KJ1505 - 7JP13 - 77 L1 141
62 1 421 1.2 23.54 2KJ1505 - 7JP13 - 77 K1 141
74 1 193 1.3 19.75 2KJ1505 - 7JP13 - 77 J1 141
86 1 017 1.5 16.85 ★ 2KJ1505 - 7JP13 - 77 H1 141
104 848 1.7 14.04 2KJ1505 - 7JP13 - 77 G1 141
125 703 1.9 11.64 ★ 2KJ1505 - 7JP13 - 77 F1 141
130 677 1.2 11.21 2KJ1505 - 7JP13 - 77 E1 141
155 568 1.3 9.41 2KJ1505 - 7JP13 - 77 D1 141
181 485 1.5 8.03 ★ 2KJ1505 - 7JP13 - 77 C1 141
217 404 1.7 6.69 2KJ1505 - 7JP13 - 77 B1 141
263 335 1.9 5.54 ★ 2KJ1505 - 7JP13 - 77 A1 141
11 K.188-LG180LA8
4.2 25 035 0.80 172.78 2KJ1511 - 7KM13 - 77T1 P02 882
4.5 23 462 0.85 161.92 2KJ1511 - 7KM13 - 77S1 P02 882
K.188-LA160ZLP6E
5.0 20 938 0.96 191.34 2KJ1511 - 7JT13 - 77 U1 P01 812
5.6 18 907 1.1 172.78 2KJ1511 - 7JT13 - 77 T1 P01 812
5.9 17 718 1.1 161.92 2KJ1511 - 7JT13 - 77 S1 P01 812
6.9 15 219 1.3 139.08 ★ 2KJ1511 - 7JT13 - 77 R1 P01 812
K.188-LA160MP4E
7.6 13 767 1.5 191.34 2KJ1511 - 7JQ13 - 7 7U1 800
8.5 12 432 1.6 172.78 2KJ1511 - 7JQ13 - 7 7T1 800
9.0 11 650 1.7 161.92 2KJ1511 - 7JQ13 - 7 7S1 800
10.5 10 007 2.0 139.08 ★ 2KJ1511 - 7JQ13 - 7 7R1 800
K.168-LA160MP4E
6.8 15 350 0.88 213.33 ★ 2KJ1510 - 7JQ13 - 7 7D2 551
7.3 14 357 0.94 199.54 2KJ1510 - 7JQ13 - 7 7C2 551
8.2 12 766 1.1 177.43 ★ 2KJ1510 - 7JQ13 - 7 7B2 551
8.7 12 052 1.1 167.5 2KJ1510 - 7JQ13 - 7 7A2 551
9.7 10 819 1.2 150.36 ★ 2KJ1510 - 7JQ13 - 7 7X1 551
10.6 9 929 1.4 138 2KJ1510 - 7JQ13 - 7 7W1 551
12.3 8 569 1.6 119.09 2KJ1510 - 7JQ13 - 7 7V1 551
14.0 7 496 1.8 104.18 2KJ1510 - 7JQ13 - 7 7U1 551
16.1 6 519 2.1 90.6 2KJ1510 - 7JQ13 - 7 7T1 551
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/47

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
11 K.148-LA160MP4E
11.1 9 461 0.85 131.49 2KJ1508 - 7JQ13 - 7 7C2 366
13.0 8 084 0.99 112.35 2KJ1508 - 7JQ13 - 7 7B2 366
14.4 7 305 1.1 101.53 ★ 2KJ1508 - 7JQ13 - 7 7A2 366
14.9 7 038 1.1 97.82 2KJ1508 - 7JQ13 - 7 7X1 366
17.3 6 088 1.3 84.61 2KJ1508 - 7JQ13 - 7 7W1 366
19.8 5 310 1.5 73.8 ★ 2KJ1508 - 7JQ13 - 7 7V1 366
23 4 544 1.8 63.16 ★ 2KJ1508 - 7JQ13 - 7 7U1 366
26 4 070 2.0 56.57 2KJ1508 - 7JQ13 - 7 7T1 366
4 30 3 447 2.3 47.91 ★ 2KJ1508 - 7JQ13 - 7 7R1 366
K.128-LA160MP4E
20 5 265 0.89 73.18 2KJ1507 - 7JQ13 - 7 7U1 266
23 4 562 1.0 63.41 ★ 2KJ1507 - 7JQ13 - 7 7T1 266
27 3 839 1.2 53.36 ★ 2KJ1507 - 7JQ13 - 7 7S1 266
30 3 464 1.4 48.14 2KJ1507 - 7JQ13 - 7 7R1 266
35 2 977 1.6 41.38 ★ 2KJ1507 - 7JQ13 - 7 7Q1 266
37 2 820 1.7 39.19 ★ 2KJ1507 - 7JQ13 - 7 7P1 266
41 2 585 1.8 35.92 2KJ1507 - 7JQ13 - 7 7N1 266
48 2 202 2.1 30.61 2KJ1507 - 7JQ13 - 7 7M1 266
54 1 944 2.4 27.02 ★ 2KJ1507 - 7JQ13 - 7 7L1 266
64 1 654 2.8 22.99 2KJ1507 - 7JQ13 - 7 7K1 266
116 904 3.6 12.56 2KJ1507 - 7JQ13 - 7 7E1 266
K.108-LA160MP4E
28 3 747 0.80 52.08 2KJ1506 - 7JQ13 - 7 7Q1 195
33 3 198 0.94 44.44 ★ 2KJ1506 - 7JQ13 - 7 7P1 195
40 2 622 1.1 36.44 ★ 2KJ1506 - 7JQ13 - 7 7N1 195
43 2 437 1.2 33.87 ★ 2KJ1506 - 7JQ13 - 7 7M1 195
47 2 249 1.3 31.25 2KJ1506 - 7JQ13 - 7 7L1 195
55 1 905 1.5 26.48 2KJ1506 - 7JQ13 - 7 7K1 195
63 1 661 1.7 23.08 ★ 2KJ1506 - 7JQ13 - 7 7J1 195
74 1 412 1.9 19.63 2KJ1506 - 7JQ13 - 7 7G1 195
87 1 205 2.1 16.75 ★ 2KJ1506 - 7JQ13 - 7 7F1 195
106 989 2.4 13.74 ★ 2KJ1506 - 7JQ13 - 7 7E1 195
113 928 2.1 12.9 ★ 2KJ1506 - 7JQ13 - 7 7D1 195
133 789 2.3 10.97 2KJ1506 - 7JQ13 - 7 7C1 195
156 673 2.6 9.36 ★ 2KJ1506 - 7JQ13 - 7 7B1 195
190 553 3.0 7.68 ★ 2KJ1506 - 7JQ13 - 7 7A1 195
K.88-LA160MP4E
51 2 051 0.80 28.5 2KJ1505 - 7JQ13 - 7 7M1 141
57 1 837 0.90 25.53 ★ 2KJ1505 - 7JQ13 - 7 7L1 141
62 1 694 0.97 23.54 2KJ1505 - 7JQ13 - 7 7K1 141
74 1 421 1.1 19.75 2KJ1505 - 7JQ13 - 7 7J1 141
87 1 212 1.2 16.85 ★ 2KJ1505 - 7JQ13 - 7 7H1 141
104 1 010 1.4 14.04 2KJ1505 - 7JQ13 - 7 7G1 141
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/48 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
11 K.88-LA160MP4E
125 838 1.6 11.64 ★ 2KJ1505 - 7JQ13 - 7 7F1 141
130 807 1.0 11.21 2KJ1505 - 7JQ13 - 7 7E1 141
155 677 1.1 9.41 2KJ1505 - 7JQ13 - 7 7D1 141
182 578 1.3 8.03 ★ 2KJ1505 - 7JQ13 - 7 7C1 141
218 481 1.4 6.69 2KJ1505 - 7JQ13 - 7 7B1 141
264 399 1.6 5.54 ★ 2KJ1505 - 7JQ13 - 7 7A1 141
15 K.188-LG180ZLB6E
6.0 23 790 0.84 161.92 2KJ1511 - 7KP13 - 77 S1 P01 882
7.0 20 434 0.98 139.08 ★ 2KJ1511 - 7KP13 - 77 R1 P01 882 4
K.188-LA160ZLP4E
7.6 18 774 1.1 191.34 2KJ1511 - 7JT13 - 77 U1 812
8.5 16 953 1.2 172.78 2KJ1511 - 7JT13 - 77 T1 812
9.0 15 887 1.3 161.92 2KJ1511 - 7JT13 - 77 S1 812
10.5 13 646 1.5 139.08 ★ 2KJ1511 - 7JT13 - 77 R1 812
12.2 11 790 1.7 120.16 2KJ1511 - 7JT13 - 77 Q1 812
13.8 10 407 1.9 106.07 2KJ1511 - 7JT13 - 77 P1 812
15.3 9 368 2.1 95.48 ★ 2KJ1511 - 7JT13 - 77 N1 812
K.168-LA160ZLP4E
8.7 16 435 0.82 167.5 2KJ1510 - 7JT13 - 77 A2 563
9.7 14 753 0.92 150.36 ★ 2KJ1510 - 7JT13 - 77 X1 563
10.6 13 540 1.0 138 2KJ1510 - 7JT13 - 77 W1 563
12.3 11 685 1.2 119.09 2KJ1510 - 7JT13 - 77 V1 563
14.0 10 222 1.3 104.18 2KJ1510 - 7JT13 - 77 U1 563
16.1 8 889 1.5 90.6 2KJ1510 - 7JT13 - 77 T1 563
18.4 7 799 1.7 79.49 ★ 2KJ1510 - 7JT13 - 77 S1 563
22 6 595 2.0 67.22 ★ 2KJ1510 - 7JT13 - 77 R1 563
24 5 984 2.3 60.99 2KJ1510 - 7JT13 - 77 Q1 563
K.148-LA160ZLP4E
14.4 9 962 0.80 101.53 ★ 2KJ1508 - 7JT13 - 77 A2 378
14.9 9 598 0.83 97.82 2KJ1508 - 7JT13 - 77 X1 378
17.3 8 302 0.96 84.61 2KJ1508 - 7JT13 - 77 W1 378
19.8 7 241 1.1 73.8 ★ 2KJ1508 - 7JT13 - 77 V1 378
23 6 197 1.3 63.16 ★ 2KJ1508 - 7JT13 - 77 U1 378
26 5 550 1.4 56.57 2KJ1508 - 7JT13 - 77 T1 378
30 4 701 1.7 47.91 ★ 2KJ1508 - 7JT13 - 77 R1 378
35 4 060 2.0 41.38 2KJ1508 - 7JT13 - 77 Q1 378
47 3 051 2.6 31.1 ★ 2KJ1508 - 7JT13 - 77 N1 378
48 3 016 2.7 30.74 2KJ1508 - 7JT13 - 77 M1 378
K.128-LA160ZLP4E
27 5 235 0.9 53.36 ★ 2KJ1507 - 7JT13 - 77 S1 278
30 4 723 1.0 48.14 2KJ1507 - 7JT13 - 77 R1 278
35 4 060 1.2 41.38 ★ 2KJ1507 - 7JT13 - 77 Q1 278
37 3 845 1.2 39.19 ★ 2KJ1507 - 7JT13 - 77 P1 278
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/49

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
15 K.128-LA160ZLP4E
41 3 524 1.3 35.92 2KJ1507 - 7JT13 - 77 N1 278
48 3 003 1.6 30.61 2KJ1507 - 7JT13 - 77 M1 278
54 2 651 1.8 27.02 ★ 2KJ1507 - 7JT13 - 77 L1 278
64 2 256 2.1 22.99 2KJ1507 - 7JT13 - 77 K1 278
73 1 954 2.4 19.92 ★ 2KJ1507 - 7JT13 - 77 J1 278
87 1 644 2.9 16.76 ★ 2KJ1507 - 7JT13 - 77 H1 278
96 1 485 3.1 15.13 2KJ1507 - 7JT13 - 77 G1 278
112 1 276 3.5 13 ★ 2KJ1507 - 7JT13 - 77 F1 278
4 116 1 232 2.6 12.56 2KJ1507 - 7JT13 - 77 E1 278
134 1 068 2.9 10.88 ★ 2KJ1507 - 7JT13 - 77 D1 278
159 899 3.3 9.16 ★ 2KJ1507 - 7JT13 - 77 C1 278
177 810 3.5 8.26 2KJ1507 - 7JT13 - 77 B1 278
206 697 3.9 7.1 ★ 2KJ1507 - 7JT13 - 77 A1 278
K.108-LA160ZLP4E
43 3 323 0.90 33.87 ★ 2KJ1506 - 7JT13 - 77 M1 207
47 3 066 0.98 31.25 2KJ1506 - 7JT13 - 77 L1 207
55 2 598 1.1 26.48 2KJ1506 - 7JT13 - 77 K1 207
63 2 265 1.2 23.08 ★ 2KJ1506 - 7JT13 - 77 J1 207
74 1 926 1.4 19.63 2KJ1506 - 7JT13 - 77 G1 207
87 1 643 1.5 16.75 ★ 2KJ1506 - 7JT13 - 77 F1 207
106 1 348 1.8 13.74 ★ 2KJ1506 - 7JT13 - 77 E1 207
113 1 266 1.5 12.9 ★ 2KJ1506 - 7JT13 - 77 D1 207
133 1 076 1.7 10.97 2KJ1506 - 7JT13 - 77 C1 207
156 918 1.9 9.36 ★ 2KJ1506 - 7JT13 - 77 B1 207
190 754 2.2 7.68 ★ 2KJ1506 - 7JT13 - 77 A1 207
K.88-LA160ZLP4E
74 1 938 0.81 19.75 2KJ1505 - 7JT13 - 77 J1 153
87 1 653 0.91 16.85 ★ 2KJ1505 - 7JT13 - 77 H1 153
104 1 378 1.0 14.04 2KJ1505 - 7JT13 - 77 G1 153
125 1 142 1.2 11.64 ★ 2KJ1505 - 7JT13 - 77 F1 153
155 923 0.83 9.41 2KJ1505 - 7JT13 - 77 D1 153
182 788 0.92 8.03 ★ 2KJ1505 - 7JT13 - 77 C1 153
218 656 1.0 6.69 2KJ1505 - 7JT13 - 77 B1 153
264 544 1.2 5.54 ★ 2KJ1505 - 7JT13 - 77 A1 153
18.5 K.188-LG180ZMB4E
7.7 22 997 0.87 191.34 2KJ1511 - 7KL13 - 77 U1 867
8.5 20 766 0.96 172.78 2KJ1511 - 7KL13 - 77 T1 867
9.1 19 461 1.0 161.92 2KJ1511 - 7KL13 - 77 S1 867
10.6 16 716 1.2 139.08 ★ 2KJ1511 - 7KL13 - 77 R1 867
12.2 14 442 1.4 120.16 2KJ1511 - 7KL13 - 77 Q1 867
13.9 12 748 1.6 106.07 2KJ1511 - 7KL13 - 77 P1 867
15.4 11 475 1.7 95.48 ★ 2KJ1511 - 7KL13 - 77 N1 867
18.6 9 522 2.1 79.23 ★ 2KJ1511 - 7KL13 - 77 M1 867
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/50 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
18.5 K.188-LG180ZMB4E
20 8 682 2.3 72.24 2KJ1511 - 7KL13 - 77 L1 867
K.168-LG180ZMB4E
10.7 16 586 0.81 138 2KJ1510 - 7KL13 - 77 W1 618
12.3 14 313 0.94 119.09 2KJ1510 - 7KL13 - 77 V1 618
14.1 12 521 1.1 104.18 2KJ1510 - 7KL13 - 77 U1 618
16.2 10 889 1.2 90.6 2KJ1510 - 7KL13 - 77 T1 618
18.5 9 554 1.4 79.49 ★ 2KJ1510 - 7KL13 - 77 S1 618
22 8 079 1.7 67.22 ★ 2KJ1510 - 7KL13 - 77 R1 618
24 7 330 1.8 60.99 2KJ1510 - 7KL13 - 77 Q1 618 4
28 6 392 2.1 53.18 ★ 2KJ1510 - 7KL13 - 77 P1 618
33 5 426 2.5 45.15 2KJ1510 - 7KL13 - 77 N1 618
K.148-LG180ZMB4E
19.9 8 870 0.90 73.8 ★ 2KJ1508 - 7KL13 - 77 V1 433
23 7 591 1.1 63.16 ★ 2KJ1508 - 7KL13 - 77 U1 433
26 6 799 1.2 56.57 2KJ1508 - 7KL13 - 77 T1 433
31 5 758 1.4 47.91 ★ 2KJ1508 - 7KL13 - 77 R1 433
36 4 973 1.6 41.38 2KJ1508 - 7KL13 - 77 Q1 433
47 3 738 2.1 31.1 ★ 2KJ1508 - 7KL13 - 77 N1 433
48 3 695 2.2 30.74 2KJ1508 - 7KL13 - 77 M1 433
55 3 195 2.5 26.58 2KJ1508 - 7KL13 - 77 L1 433
63 2 787 2.9 23.19 ★ 2KJ1508 - 7KL13 - 77 K1 433
167 1 056 3.8 8.79 2KJ1508 - 7KL13 - 77 D1 433
198 894 4.2 7.44 ★ 2KJ1508 - 7KL13 - 77 C1 433
K.128-LG180ZMB4E
30 5 786 0.81 48.14 2KJ1507 - 7KL13 - 77 R1 333
36 4 973 0.95 41.38 ★ 2KJ1507 - 7KL13 - 77 Q1 333
38 4 710 1.0 39.19 ★ 2KJ1507 - 7KL13 - 77 P1 333
41 4 317 1.1 35.92 2KJ1507 - 7KL13 - 77 N1 333
48 3 679 1.3 30.61 2KJ1507 - 7KL13 - 77 M1 333
54 3 247 1.4 27.02 ★ 2KJ1507 - 7KL13 - 77 L1 333
64 2 763 1.7 22.99 2KJ1507 - 7KL13 - 77 K1 333
74 2 394 2.0 19.92 ★ 2KJ1507 - 7KL13 - 77 J1 333
88 2 014 2.3 16.76 ★ 2KJ1507 - 7KL13 - 77 H1 333
97 1 818 2.5 15.13 2KJ1507 - 7KL13 - 77 G1 333
113 1 562 2.8 13 ★ 2KJ1507 - 7KL13 - 77 F1 333
117 1 510 2.1 12.56 2KJ1507 - 7KL13 - 77 E1 333
135 1 308 2.4 10.88 ★ 2KJ1507 - 7KL13 - 77 D1 333
160 1 101 2.7 9.16 ★ 2KJ1507 - 7KL13 - 77 C1 333
178 993 2.9 8.26 2KJ1507 - 7KL13 - 77 B1 333
207 853 3.2 7.1 ★ 2KJ1507 - 7KL13 - 77 A1 333
K.108-LG180ZMB4E
47 3 756 0.80 31.25 2KJ1506 - 7KL13 - 77 L1 262
56 3 183 0.91 26.48 2KJ1506 - 7KL13 - 77 K1 262
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/51

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
18.5 K.108-LG180ZMB4E
64 2 774 1.0 23.08 ★ 2KJ1506 - 7KL13 - 77 J1 262
75 2 359 1.1 19.63 2KJ1506 - 7KL13 - 77 G1 262
88 2 013 1.2 16.75 ★ 2KJ1506 - 7KL13 - 77 F1 262
107 1 651 1.4 13.74 ★ 2KJ1506 - 7KL13 - 77 E1 262
114 1 550 1.2 12.9 ★ 2KJ1506 - 7KL13 - 77 D1 262
134 1 318 1.4 10.97 2KJ1506 - 7KL13 - 77 C1 262
157 1 125 1.6 9.36 ★ 2KJ1506 - 7KL13 - 77 B1 262
191 923 1.8 7.68 ★ 2KJ1506 - 7KL13 - 77 A1 262
4 22 K.188-LG180ZLB4E
8.5 24 779 0.81 172.78 2KJ1511 - 7KP13 - 77 T1 882
9.0 23 221 0.86 161.92 2KJ1511 - 7KP13 - 77 S1 882
10.5 19 946 1.0 139.08 ★ 2KJ1511 - 7KP13 - 77 R1 882
12.2 17 233 1.2 120.16 2KJ1511 - 7KP13 - 77 Q1 882
13.8 15 212 1.3 106.07 2KJ1511 - 7KP13 - 77 P1 882
15.3 13 693 1.5 95.48 ★ 2KJ1511 - 7KP13 - 77 N1 882
18.5 11 363 1.8 79.23 ★ 2KJ1511 - 7KP13 - 77 M1 882
20 10 360 1.9 72.24 2KJ1511 - 7KP13 - 77 L1 882
23 9 090 2.2 63.38 ★ 2KJ1511 - 7KP13 - 77 K1 882
K.168-LG180ZLB4E
14.1 14 941 0.9 104.18 2KJ1510 - 7KP13 - 77 U1 633
16.2 12 993 1.0 90.6 2KJ1510 - 7KP13 - 77 T1 633
18.4 11 400 1.2 79.49 ★ 2KJ1510 - 7KP13 - 77 S1 633
22 9 640 1.4 67.22 ★ 2KJ1510 - 7KP13 - 77 R1 633
24 8 747 1.5 60.99 2KJ1510 - 7KP13 - 77 Q1 633
28 7 627 1.8 53.18 ★ 2KJ1510 - 7KP13 - 77 P1 633
32 6 475 2.1 45.15 2KJ1510 - 7KP13 - 77 N1 633
42 4 955 2.7 34.55 ★ 2KJ1510 - 7KP13 - 77 M1 633
K.148-LG180ZLB4E
23 9 058 0.88 63.16 ★ 2KJ1508 - 7KP13 - 77 U1 448
26 8 113 0.99 56.57 2KJ1508 - 7KP13 - 77 T1 448
31 6 871 1.2 47.91 ★ 2KJ1508 - 7KP13 - 77 R1 448
35 5 934 1.3 41.38 2KJ1508 - 7KP13 - 77 Q1 448
47 4 460 1.8 31.1 ★ 2KJ1508 - 7KP13 - 77 N1 448
48 4 409 1.8 30.74 2KJ1508 - 7KP13 - 77 M1 448
55 3 812 2.1 26.58 2KJ1508 - 7KP13 - 77 L1 448
63 3 326 2.4 23.19 ★ 2KJ1508 - 7KP13 - 77 K1 448
74 2 845 2.8 19.84 ★ 2KJ1508 - 7KP13 - 77 J1 448
82 2 548 3.1 17.77 2KJ1508 - 7KP13 - 77 H1 448
97 2 158 3.5 15.05 ★ 2KJ1508 - 7KP13 - 77 G1 448
167 1 261 3.2 8.79 2KJ1508 - 7KP13 - 77 D1 448
197 1 067 3.5 7.44 ★ 2KJ1508 - 7KP13 - 77 C1 448
228 922 3.9 6.43 2KJ1508 - 7KP13 - 77 B1 448
303 693 4.8 4.83 ★ 2KJ1508 - 7KP13 - 77 A1 448
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/52 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
22 K.128-LG180ZLB4E
37 5 620 0.84 39.19 ★ 2KJ1507 - 7KP13 - 77 P1 348
41 5 151 0.91 35.92 2KJ1507 - 7KP13 - 77 N1 348
48 4 390 1.1 30.61 2KJ1507 - 7KP13 - 77 M1 348
54 3 875 1.2 27.02 ★ 2KJ1507 - 7KP13 - 77 L1 348
64 3 297 1.4 22.99 2KJ1507 - 7KP13 - 77 K1 348
74 2 857 1.6 19.92 ★ 2KJ1507 - 7KP13 - 77 J1 348
87 2 404 2.0 16.76 ★ 2KJ1507 - 7KP13 - 77 H1 348
97 2 170 2.1 15.13 2KJ1507 - 7KP13 - 77 G1 348
113 1 864 2.4 13 ★ 2KJ1507 - 7KP13 - 77 F1 348 4
117 1 801 1.8 12.56 2KJ1507 - 7KP13 - 77 E1 348
135 1 560 2.0 10.88 ★ 2KJ1507 - 7KP13 - 77 D1 348
160 1 314 2.2 9.16 ★ 2KJ1507 - 7KP13 - 77 C1 348
177 1 185 2.4 8.26 2KJ1507 - 7KP13 - 77 B1 348
206 1 018 2.7 7.1 ★ 2KJ1507 - 7KP13 - 77 A1 348
K.108-LG180ZLB4E
64 3 310 0.84 23.08 ★ 2KJ1506 - 7KP13 - 77 J1 277
75 2 815 0.93 19.63 2KJ1506 - 7KP13 - 77 G1 277
88 2 402 1.0 16.75 ★ 2KJ1506 - 7KP13 - 77 F1 277
107 1 970 1.2 13.74 ★ 2KJ1506 - 7KP13 - 77 E1 277
114 1 850 1.0 12.9 ★ 2KJ1506 - 7KP13 - 77 D1 277
134 1 573 1.2 10.97 2KJ1506 - 7KP13 - 77 C1 277
157 1 342 1.3 9.36 ★ 2KJ1506 - 7KP13 - 77 B1 277
191 1 101 1.5 7.68 ★ 2KJ1506 - 7KP13 - 77 A1 277
30 K.188-LG200LB4E
12.3 23 340 0.86 120.16 2KJ1511 - 7LM13 - 77Q1 932
13.9 20 603 0.97 106.07 2KJ1511 - 7LM13 - 77P1 932
15.4 18 546 1.1 95.48 ★ 2KJ1511 - 7LM13 - 77N1 932
18.6 15 389 1.3 79.23 ★ 2KJ1511 - 7LM13 - 77M1 932
20 14 032 1.4 72.24 2KJ1511 - 7LM13 - 77L1 932
23 12 311 1.6 63.38 ★ 2KJ1511 - 7LM13 - 77K1 932
27 10 580 1.9 54.47 2KJ1511 - 7LM13 - 77J1 932
35 8 241 2.4 42.43 ★ 2KJ1511 - 7LM13 - 77H1 932
K.168-LG200LB4E
18.6 15 440 0.87 79.49 ★ 2KJ1510 - 7LM13 - 77S1 683
22 13 057 1.0 67.22 ★ 2KJ1510 - 7LM13 - 77R1 683
24 11 847 1.1 60.99 2KJ1510 - 7LM13 - 77Q1 683
28 10 330 1.3 53.18 ★ 2KJ1510 - 7LM13 - 77P1 683
33 8 770 1.5 45.15 2KJ1510 - 7LM13 - 77N1 683
43 6 711 2.0 34.55 ★ 2KJ1510 - 7LM13 - 77M1 683
45 6 319 2.1 32.53 2KJ1510 - 7LM13 - 77L1 683
52 5 544 2.4 28.54 ★ 2KJ1510 - 7LM13 - 77K1 683
61 4 689 2.9 24.14 ★ 2KJ1510 - 7LM13 - 77J1 683
67 4 254 3.1 21.9 2KJ1510 - 7LM13 - 77H1 683
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/53

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
30 K.168-LG200LB4E
126 2 267 3.1 11.67 2KJ1510 - 7LM13 - 77D1 683
145 1 975 3.4 10.17 ★ 2KJ1510 - 7LM13 - 77C1 683
171 1 678 3.8 8.64 2KJ1510 - 7LM13 - 77B1 683
223 1 284 4.6 6.61 ★ 2KJ1510 - 7LM13 - 77A1 683
K.148-LG200LB4E
31 9 306 0.86 47.91 ★ 2KJ1508 - 7LM13 - 77R1 498
36 8 038 1.0 41.38 2KJ1508 - 7LM13 - 77Q1 498
47 6 041 1.3 31.1 ★ 2KJ1508 - 7LM13 - 77N1 498
4 48 5 971 1.3 30.74 2KJ1508 - 7LM13 - 77M1 498
56 5 163 1.5 26.58 2KJ1508 - 7LM13 - 77L1 498
64 4 504 1.8 23.19 ★ 2KJ1508 - 7LM13 - 77K1 498
74 3 854 2.1 19.84 ★ 2KJ1508 - 7LM13 - 77J1 498
83 3 452 2.3 17.77 2KJ1508 - 7LM13 - 77H1 498
98 2 923 2.6 15.05 ★ 2KJ1508 - 7LM13 - 77G1 498
113 2 525 2.9 13 2KJ1508 - 7LM13 - 77F1 498
151 1 898 3.5 9.77 ★ 2KJ1508 - 7LM13 - 77E1 498
168 1 707 2.3 8.79 2KJ1508 - 7LM13 - 77D1 498
198 1 445 2.6 7.44 ★ 2KJ1508 - 7LM13 - 77C1 498
229 1 249 2.9 6.43 2KJ1508 - 7LM13 - 77B1 498
305 938 3.5 4.83 ★ 2KJ1508 - 7LM13 - 77A1 498
K.128-LG200LB4E
55 5 248 0.9 27.02 ★ 2KJ1507 - 7LM13 - 77L1 398
64 4 466 1.1 22.99 2KJ1507 - 7LM13 - 77K1 398
74 3 869 1.2 19.92 ★ 2KJ1507 - 7LM13 - 77J1 398
88 3 255 1.4 16.76 ★ 2KJ1507 - 7LM13 - 77H1 398
98 2 939 1.6 15.13 2KJ1507 - 7LM13 - 77G1 398
113 2 525 1.8 13 ★ 2KJ1507 - 7LM13 - 77F1 398
117 2 440 1.3 12.56 2KJ1507 - 7LM13 - 77E1 398
136 2 113 1.5 10.88 ★ 2KJ1507 - 7LM13 - 77D1 398
161 1 779 1.6 9.16 ★ 2KJ1507 - 7LM13 - 77C1 398
179 1 604 1.8 8.26 2KJ1507 - 7LM13 - 77B1 398
208 1 379 2.0 7.1 ★ 2KJ1507 - 7LM13 - 77A1 398
37 K.188-LG225S4E
15.4 22 951 0.87 95.48 ★ 2KJ1511 - 7ME13 - 77N1 1 012
18.6 19 045 1.1 79.23 ★ 2KJ1511 - 7ME13 - 77M1 1 012
20 17 365 1.2 72.24 2KJ1511 - 7ME13 - 77L1 1 012
23 15 235 1.3 63.38 ★ 2KJ1511 - 7ME13 - 77K1 1 012
27 13 093 1.5 54.47 2KJ1511 - 7ME13 - 77J1 1 012
35 10 199 2.0 42.43 ★ 2KJ1511 - 7ME13 - 77H1 1 012
43 8 240 2.4 34.28 ★ 2KJ1511 - 7ME13 - 77G1 1 012
52 6 839 2.9 28.45 ★ 2KJ1511 - 7ME13 - 77F1 1 012
K.168-LG225S4E
22 16 158 0.84 67.22 ★ 2KJ1510 - 7ME13 - 77R1 763
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/54 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
37 K.168-LG225S4E
24 14 660 0.92 60.99 2KJ1510 - 7ME13 - 77Q1 763
28 12 783 1.1 53.18 ★ 2KJ1510 - 7ME13 - 77P1 763
33 10 853 1.2 45.15 2KJ1510 - 7ME13 - 77N1 763
42 8 305 1.6 34.55 ★ 2KJ1510 - 7ME13 - 77M1 763
45 7 819 1.7 32.53 2KJ1510 - 7ME13 - 77L1 763
52 6 860 2.0 28.54 ★ 2KJ1510 - 7ME13 - 77K1 763
61 5 803 2.3 24.14 ★ 2KJ1510 - 7ME13 - 77J1 763
67 5 264 2.5 21.9 2KJ1510 - 7ME13 - 77H1 763
77 4 589 2.7 19.09 ★ 2KJ1510 - 7ME13 - 77G1 763 4
91 3 896 3.1 16.21 2KJ1510 - 7ME13 - 77F1 763
118 2 983 3.7 12.41 ★ 2KJ1510 - 7ME13 - 77E1 763
126 2 805 2.5 11.67 2KJ1510 - 7ME13 - 77D1 763
145 2 445 2.7 10.17 ★ 2KJ1510 - 7ME13 - 77C1 763
170 2 077 3.1 8.64 2KJ1510 - 7ME13 - 77B1 763
222 1 589 3.7 6.61 ★ 2KJ1510 - 7ME13 - 77A1 763
K.148-LG225S4E
36 9 947 0.8 41.38 2KJ1508 - 7ME13 - 77Q1 578
47 7 476 1.1 31.1 ★ 2KJ1508 - 7ME13 - 77N1 578
48 7 389 1.1 30.74 2KJ1508 - 7ME13 - 77M1 578
55 6 389 1.3 26.58 2KJ1508 - 7ME13 - 77L1 578
63 5 574 1.4 23.19 ★ 2KJ1508 - 7ME13 - 77K1 578
74 4 769 1.7 19.84 ★ 2KJ1508 - 7ME13 - 77J1 578
83 4 271 1.9 17.77 2KJ1508 - 7ME13 - 77H1 578
98 3 618 2.1 15.05 ★ 2KJ1508 - 7ME13 - 77G1 578
113 3 125 2.3 13 2KJ1508 - 7ME13 - 77F1 578
150 2 348 2.8 9.77 ★ 2KJ1508 - 7ME13 - 77E1 578
167 2 113 1.9 8.79 2KJ1508 - 7ME13 - 77D1 578
198 1 788 2.1 7.44 ★ 2KJ1508 - 7ME13 - 77C1 578
229 1 546 2.3 6.43 2KJ1508 - 7ME13 - 77B1 578
304 1 161 2.9 4.83 ★ 2KJ1508 - 7ME13 - 77A1 578
K.128-K4-LGI225S4E
64 5 526 0.85 22.99 2KJ1507 - 7ME13 - 77K1 478
74 4 788 0.98 19.92 ★ 2KJ1507 - 7ME13 - 77J1 478
88 4 029 1.2 16.76 ★ 2KJ1507 - 7ME13 - 77H1 478
97 3 637 1.3 15.13 2KJ1507 - 7ME13 - 77G1 478
113 3 125 1.4 13 ★ 2KJ1507 - 7ME13 - 77F1 478
117 3 019 1.1 12.56 2KJ1507 - 7ME13 - 77E1 478
135 2 615 1.2 10.88 ★ 2KJ1507 - 7ME13 - 77D1 478
160 2 202 1.3 9.16 ★ 2KJ1507 - 7ME13 - 77C1 478
178 1 985 1.4 8.26 2KJ1507 - 7ME13 - 77B1 478
207 1 707 1.6 7.1 ★ 2KJ1507 - 7ME13 - 77A1 478
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/55

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
45 K.188-LG225ZM4E
18.6 23 084 0.87 79.23 ★ 2KJ1511 - 7MU13 - 77M1 1 012
20 21 048 0.95 72.24 2KJ1511 - 7MU13 - 77L1 1 012
23 18 466 1.1 63.38 ★ 2KJ1511 - 7MU13 - 77K1 1 012
27 15 870 1.3 54.47 2KJ1511 - 7MU13 - 77J1 1 012
35 12 362 1.6 42.43 ★ 2KJ1511 - 7MU13 - 77H1 1 012
43 9 988 2.0 34.28 ★ 2KJ1511 - 7MU13 - 77G1 1 012
52 8 289 2.4 28.45 ★ 2KJ1511 - 7MU13 - 77F1 1 012
57 7 558 2.6 25.94 2KJ1511 - 7MU13 - 77E1 1 012
4 65 6 631 3.0 22.76 ★ 2KJ1511 - 7MU13 - 77D1 1 012
K.168-LG225ZM4E
28 15 494 0.87 53.18 ★ 2KJ1510 - 7MU13 - 77P1 763
33 13 155 1.0 45.15 2KJ1510 - 7MU13 - 77N1 763
43 10 066 1.3 34.55 ★ 2KJ1510 - 7MU13 - 77M1 763
45 9 478 1.4 32.53 2KJ1510 - 7MU13 - 77L1 763
52 8 315 1.6 28.54 ★ 2KJ1510 - 7MU13 - 77K1 763
61 7 033 1.9 24.14 ★ 2KJ1510 - 7MU13 - 77J1 763
67 6 381 2.1 21.9 2KJ1510 - 7MU13 - 77H1 763
77 5 562 2.3 19.09 ★ 2KJ1510 - 7MU13 - 77G1 763
91 4 723 2.5 16.21 2KJ1510 - 7MU13 - 77F1 763
119 3 616 3.0 12.41 ★ 2KJ1510 - 7MU13 - 77E1 763
126 3 400 2.1 11.67 2KJ1510 - 7MU13 - 77D1 763
145 2 963 2.3 10.17 ★ 2KJ1510 - 7MU13 - 77C1 763
171 2 517 2.5 8.64 2KJ1510 - 7MU13 - 77B1 763
223 1 926 3.0 6.61 ★ 2KJ1510 - 7MU13 - 77A1 763
K.148-LG225ZM4E
47 9 061 0.88 31.1 ★ 2KJ1508 - 7MU13 - 77N1 578
48 8 956 0.89 30.74 2KJ1508 - 7MU13 - 77M1 578
56 7 744 1.0 26.58 2KJ1508 - 7MU13 - 77L1 578
64 6 757 1.2 23.19 ★ 2KJ1508 - 7MU13 - 77K1 578
74 5 781 1.4 19.84 ★ 2KJ1508 - 7MU13 - 77J1 578
83 5 177 1.5 17.77 2KJ1508 - 7MU13 - 77H1 578
98 4 385 1.7 15.05 ★ 2KJ1508 - 7MU13 - 77G1 578
113 3 788 1.9 13 2KJ1508 - 7MU13 - 77F1 578
151 2 847 2.3 9.77 ★ 2KJ1508 - 7MU13 - 77E1 578
168 2 561 1.6 8.79 2KJ1508 - 7MU13 - 77D1 578
198 2 168 1.7 7.44 ★ 2KJ1508 - 7MU13 - 77C1 578
229 1 873 1.9 6.43 2KJ1508 - 7MU13 - 77B1 578
305 1 407 2.4 4.83 ★ 2KJ1508 - 7MU13 - 77A1 578
K.128-K4-LGI225ZM4E
74 5 797 0.81 19.92 ★ 2KJ1507 - 7MU13 - 77J1 478
88 4 877 0.96 16.76 ★ 2KJ1507 - 7MU13 - 77H1 478
98 4 403 1.1 15.13 2KJ1507 - 7MU13 - 77G1 478
113 3 783 1.2 13 ★ 2KJ1507 - 7MU13 - 77F1 478
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/56 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
45 K.128-K4-LGI225ZM4E
117 3 655 0.88 12.56 2KJ1507 - 7MU13 - 77E1 478
136 3 166 0.97 10.88 ★ 2KJ1507 - 7MU13 - 77D1 478
161 2 666 1.1 9.16 ★ 2KJ1507 - 7MU13 - 77C1 478
179 2 404 1.2 8.26 2KJ1507 - 7MU13 - 77B1 478
208 2 066 1.3 7.1 ★ 2KJ1507 - 7MU13 - 77A1 478
55 K.188-LG250ZM4E
23 22 493 0.89 63.38 ★ 2KJ1511 - 7NN13 - 77K1 1 102
27 19 331 1.0 54.47 2KJ1511 - 7NN13 - 77J1 1 102
35 15 058 1.3 42.43 ★ 2KJ1511 - 7NN13 - 77H1 1 102 4
43 12 166 1.6 34.28 ★ 2KJ1511 - 7NN13 - 77G1 1 102
52 10 097 2.0 28.45 ★ 2KJ1511 - 7NN13 - 77F1 1 102
57 9 206 2.2 25.94 2KJ1511 - 7NN13 - 77E1 1 102
65 8 077 2.5 22.76 ★ 2KJ1511 - 7NN13 - 77D1 1 102
76 6 942 2.9 19.56 2KJ1511 - 7NN13 - 77C1 1 102
97 5 405 3.5 15.23 ★ 2KJ1511 - 7NN13 - 77B1 1 102
K.168-LG250ZM4E
33 16 024 0.84 45.15 2KJ1510 - 7NN13 - 77N1 853
43 12 262 1.1 34.55 ★ 2KJ1510 - 7NN13 - 77M1 853
46 11 545 1.2 32.53 2KJ1510 - 7NN13 - 77L1 853
52 10 129 1.3 28.54 ★ 2KJ1510 - 7NN13 - 77K1 853
61 8 567 1.6 24.14 ★ 2KJ1510 - 7NN13 - 77J1 853
68 7 772 1.7 21.9 2KJ1510 - 7NN13 - 77H1 853
78 6 775 1.9 19.09 ★ 2KJ1510 - 7NN13 - 77G1 853
91 5 753 2.1 16.21 2KJ1510 - 7NN13 - 77F1 853
119 4 404 2.5 12.41 ★ 2KJ1510 - 7NN13 - 77E1 853
127 4 142 1.7 11.67 2KJ1510 - 7NN13 - 77D1 853
146 3 609 1.9 10.17 ★ 2KJ1510 - 7NN13 - 77C1 853
171 3 066 2.1 8.64 2KJ1510 - 7NN13 - 77B1 853
224 2 346 2.5 6.61 ★ 2KJ1510 - 7NN13 - 77A1 853
K.148-K4-LGI250ZM4E
56 9 433 0.85 26.58 2KJ1508 - 7NN13 - 77L1 668
64 8 230 0.97 23.19 ★ 2KJ1508 - 7NN13 - 77K1 668
75 7 041 1.1 19.84 ★ 2KJ1508 - 7NN13 - 77J1 668
83 6 307 1.3 17.77 2KJ1508 - 7NN13 - 77H1 668
98 5 341 1.4 15.05 ★ 2KJ1508 - 7NN13 - 77G1 668
114 4 614 1.6 13 2KJ1508 - 7NN13 - 77F1 668
151 3 467 1.9 9.77 ★ 2KJ1508 - 7NN13 - 77E1 668
168 3 120 1.3 8.79 2KJ1508 - 7NN13 - 77D1 668
199 2 640 1.4 7.44 ★ 2KJ1508 - 7NN13 - 77C1 668
230 2 282 1.6 6.43 2KJ1508 - 7NN13 - 77B1 668
306 1 714 1.9 4.83 ★ 2KJ1508 - 7NN13 - 77A1 668
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/57

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
75 K.188-K4-LGI280S4E
35 20 465 0.98 42.43 ★ 2KJ1511 - 7PG13 - 77 H1 1 227
43 16 534 1.2 34.28 ★ 2KJ1511 - 7PG13 - 77 G1 1 227
52 13 722 1.5 28.45 ★ 2KJ1511 - 7PG13 - 77 F1 1 227
57 12 511 1.6 25.94 2KJ1511 - 7PG13 - 77 E1 1 227
65 10 978 1.8 22.76 ★ 2KJ1511 - 7PG13 - 77 D1 1 227
76 9 434 2.1 19.56 2KJ1511 - 7PG13 - 77 C1 1 227
98 7 346 2.6 15.23 ★ 2KJ1511 - 7PG13 - 77 B1 1 227
123 5 836 3.0 12.1 ★ 2KJ1511 - 7PG13 - 77 A1 1 227
4 K.168-K4-LGI280S4E
43 16 664 0.81 34.55 ★ 2KJ1510 - 7PG13 - 77 M1 978
46 15 690 0.86 32.53 2KJ1510 - 7PG13 - 77 L1 978
52 13 766 0.98 28.54 ★ 2KJ1510 - 7PG13 - 77 K1 978
62 11 643 1.2 24.14 ★ 2KJ1510 - 7PG13 - 77 J1 978
68 10 563 1.2 21.9 2KJ1510 - 7PG13 - 77 H1 978
78 9 208 1.4 19.09 ★ 2KJ1510 - 7PG13 - 77 G1 978
92 7 818 1.5 16.21 2KJ1510 - 7PG13 - 77 F1 978
120 5 986 1.8 12.41 ★ 2KJ1510 - 7PG13 - 77 E1 978
127 5 629 1.2 11.67 2KJ1510 - 7PG13 - 77 D1 978
146 4 905 1.4 10.17 ★ 2KJ1510 - 7PG13 - 77 C1 978
172 4 167 1.5 8.64 2KJ1510 - 7PG13 - 77 B1 978
225 3 188 1.8 6.61 ★ 2KJ1510 - 7PG13 - 77 A1 978
90 K.188-K4-LGI280ZM4E
35 24 558 0.81 42.43 ★ 2KJ1511 - 7PW13 - 77H1 1 267
43 19 841 1.0 34.28 ★ 2KJ1511 - 7PW13 - 77G1 1 267
52 16 467 1.2 28.45 ★ 2KJ1511 - 7PW13 - 77F1 1 267
57 15 014 1.3 25.94 2KJ1511 - 7PW13 - 77E1 1 267
65 13 173 1.5 22.76 ★ 2KJ1511 - 7PW13 - 77D1 1 267
76 11 321 1.8 19.56 2KJ1511 - 7PW13 - 77C1 1 267
98 8 815 2.2 15.23 ★ 2KJ1511 - 7PW13 - 77B1 1 267
123 7 003 2.5 12.1 ★ 2KJ1511 - 7PW13 - 77A1 1 267
K.168-K4-LGI280ZM4E
52 16 519 0.82 28.54 ★ 2KJ1510 - 7PW13 - 77K1 1 018
62 13 972 0.97 24.14 ★ 2KJ1510 - 7PW13 - 77J1 1 018
68 12 675 1.0 21.9 2KJ1510 - 7PW13 - 77H1 1 018
78 11 049 1.1 19.09 ★ 2KJ1510 - 7PW13 - 77G1 1 018
92 9 382 1.3 16.21 2KJ1510 - 7PW13 - 77F1 1 018
120 7 183 1.5 12.41 ★ 2KJ1510 - 7PW13 - 77E1 1 018
127 6 754 1.0 11.67 2KJ1510 - 7PW13 - 77D1 1 018
146 5 886 1.1 10.17 ★ 2KJ1510 - 7PW13 - 77C1 1 018
172 5 001 1.3 8.64 2KJ1510 - 7PW13 - 77B1 1 018
225 3 826 1.5 6.61 ★ 2KJ1510 - 7PW13 - 77A1 1 018
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

4/58 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Geared motors up to 200 kW

■ Selection and ordering data (continued)

Power rating Output Output Service Gearbox Order No. Order Weight *)
PMotor speed torque factor ratio code
kW (50 Hz) n2 (50 Hz) T2 fB itot (No. of
rpm Nm poles) kg
110 K.188-K2-LGI315S4E
76 13 790 1.5 19.56 2KJ1511 - 7QQ13 - 77C1 1 447
98 10 738 1.8 15.23 ★ 2KJ1511 - 7QQ13 - 77B1 1 447
123 8 531 2.1 12.1 ★ 2KJ1511 - 7QQ13 - 77A1 1 447
132 K.188-K2-LGI315ZM4E
76 16 604 1.2 19.56 2KJ1511 - 7QS13 - 77 C1 1 502
98 12 929 1.5 15.23 ★ 2KJ1511 - 7QS13 - 77 B1 1 502
123 10 272 1.7 12.1 ★ 2KJ1511 - 7QS13 - 77 A1 1 502
160 K.188-K2-LGI315L4E
76 20 126 0.99 19.56 2KJ1511 - 7QU13 - 77C1 1 627 4
98 15 671 1.2 15.23 ★ 2KJ1511 - 7QU13 - 77B1 1 627
123 12 450 1.4 12.1 ★ 2KJ1511 - 7QU13 - 77A1 1 627
200 K.188-K2-LGI315ZLB4E
76 25 074 0.80 19.56 2KJ1511 - 7QV13 - 77 C1 1 742
98 19 523 0.97 15.23 ★ 2KJ1511 - 7QV13 - 77 B1 1 742
123 15 511 1.1 12.1 ★ 2KJ1511 - 7QV13 - 77 A1 1 742
★ Preferred transmission ratio
Shaft designs, see page 4/83 ––––––––––––––––––––––––––––––––– 1, 2, 3, 5, 6 or 9 ––––––––––––
Frequency and voltage, see page 8/20 –––––––––––––––––––––––– 1 to 9 ––––––––––––––––––––––––––––––
Gearbox housing mounting position, see page 4/87 ––––––––––––– A, D, E, F, H or M –––––––––––––––––––––
*) For mounting type B3

Siemens D 87.1 · 2011 4/59

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data

Gearbox size Ratio code Transmis- Output Nominal Permissible input torque T1 [Nm]
sion ratio speed torque 2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox Order No 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque 15th and itot n2 (50 Hz) T2N (fB=1) Motor size
16th position
Nm rpm Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
B.28 D2 57.53 24 130 •
79 ... 130 C2 48.51 ★ 29 130 • •
B2 43.07 33 130 • •
A2 37.76 ★ 37 130 • • •
X1 33.79 41 130 • • •
W1 29.99 ★ 47 130 • • •
V1 26.28 53 130 • • •
U1 23.11 ★ 61 130 • • •
T1 20.87 67 130 • • • •
4 S1 18.19 ★ 77 130 • • •
R1 16.34 86 130 • • •
Q1 14.75 ★ 95 130 • • • •
P1 13.38 105 130 • • • •
N1 12.17 ★ 115 130 • • • •
M1 10.76 130 130 • • • •
L1 9.94 ★ 141 128 • • • •
K1 8.56 164 121 • • • •
J1 7.78 ★ 180 117 • • • •
H1 7.49 187 90 • • •
G1 6.76 ★ 207 90 • • • •
F1 6.13 228 90 • • • •
E1 5.58 ★ 251 90 • • • •
D1 4.94 284 90 • • • •
C1 4.56 ★ 307 87 • • • •
B1 3.92 357 82 • • • •
A1 3.57 ★ 393 79 • • • •
★ Preferred transmission ratio
1)
Only possible with integrated motor.
In the case of gearboxes of size 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the unit is the decisive factor.

4/60 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data

Gearbox size Ratio Transmis- Output Nominal Permissible input torque T1 [Nm]
code sion ratio speed torque 2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox Order No 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque 15th and itot n2 (50 Hz) T2N (fB=1) Motor size
16th position
Nm rpm Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
B.38 U2 65.69 22 200 •
203 … 250 T2 57.04 ★ 25 250 • •
S2 50.72 29 250 • •
R2 44.00 ★ 33 250 • • •
Q2 41.11 35 250 • • •
P2 36.16 ★ 40 250 • • •
N2 31.67 46 250 • • • •
M2 28.01 ★ 52 250 • • • •
L2 25.38 57 250 • • • •
K2 22.41 ★ 65 250 • • • • 4
J2 20.22 72 245 • • • •
H2 18.33 ★ 79 237 • • • •
G2 16.70 87 230 • • • •
F2 15.28 ★ 95 225 • • • •
E2 13.66 106 217 • • • •
C2 12.50 ★ 116 220 • • • •
A2 11.05 ★ 131 223 • • • •
X1 10.02 145 221 • • • •
U1 8.84 ★ 164 236 • • • •
S1 7.98 182 236 • • • •
R1 7.24 ★ 200 236 • • • •
P1 6.59 220 236 • • • •
M1 6.03 ★ 240 235 • • • •
K1 5.39 269 211 • • • •
H1 4.95 ★ 293 221 • • • •
F1 4.46 325 213 • • • •
C1 3.84 ★ 378 203 • • • •
★ Preferred transmission ratio
1)
Only possible with integrated motor.
In the case of gearboxes of size 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the unit is the decisive factor.

Siemens D 87.1 · 2011 4/61

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.38-D.28 M1 13 129 0.11 – 250 •
250 L1 11 327 ★ 0.12 – 250 • •
K1 9 731 0.14 – 250 • •
J1 8 959 ★ 0.16 – 250 • • •
H1 8 144 0.17 – 250 • • •
G1 7 209 ★ 0.19 – 250 • • •
F1 6 038 0.23 – 250 • • •
E1 5 148 ★ 0.27 – 250 • • •
D1 4 376 ★ 0.32 – 250 • • •
4 C1 3 803 0.37 – 250 • • •
B1 3 310 ★ 0.42 – 250 • • •
A1 2 986 0.47 – 250 • • •
K.38-Z.28 C2 2 797 0.50 – 250 •
250 B2 2 359 ★ 0.59 – 250 • •
A2 2 094 0.67 – 250 • •
X1 1 836 0.76 – 250 • • •
W1 1 643 ★ 0.85 – 250 • • •
V1 1 458 0.96 – 250 • • •
U1 1 278 ★ 1.10 – 250 • • •
T1 1 124 1.30 – 250 • • •
S1 1 015 ★ 1.40 – 250 • • • •
R1 884 1.60 – 250 • • •
Q1 794 ★ 1.80 – 250 • • •
P1 717 1.90 – 250 • • • •
N1 650 ★ 2.10 – 250 • • • •
M1 592 2.40 – 250 • • • •
L1 523 ★ 2.70 – 250 • • • •
K1 483 2.90 – 250 • • • •
J1 416 3.40 – 250 • • • •
H1 378 3.70 – 250 • • • •
G1 344 4.10 – 250 • • • •
F1 312 4.50 – 250 • • • •
E1 284 4.90 – 250 • • • •
D1 251 5.60 – 250 • • • •
C1 231 6.10 – 250 • • • •
B1 199 7.00 – 250 • • • •
A1 181 7.70 – 250 • • • •
 Preferred transmission ratio
1) Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/62 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.38 L2 179.13 ★ 8.1 15 250 • • •
148 ... 250 K2 159.04 9.1 15 250 • • •
J2 139.43 ★ 10.4 15 250 • • • •
H2 124.78 11.6 15 250 • • • •
G2 110.75 ★ 13.1 15 250 • • • •
F2 97.05 14.9 15 250 • • • •
E2 85.33 ★ 17.0 15 250 • • • •
D2 77.09 18.8 15 250 • • • •
C2 67.18 ★ 22.0 15 250 • • • •
B2 60.33 24.0 15 250 • • • • 4
A2 54.47 ★ 27.0 15 250 • • • •
X1 49.38 29.0 15 250 • • • •
W1 44.94 ★ 32.0 15 250 • • • •
V1 39.73 36.0 15 250 • • • •
U1 36.69 ★ 40.0 15 250 • • • •
T1 31.59 46.0 16 250 • • • •
S1 28.72 ★ 50.0 16 250 • • • •
R1 26.90 ★ 54.0 17 216 • • • •
Q1 24.16 60.0 17 209 • • • •
P1 21.81 ★ 66.0 17 203 • • • •
N1 19.78 73.0 17 197 • • • •
M1 17.99 ★ 81.0 17 191 • • • •
L1 15.91 91.0 18 184 • • • •
K1 14.69 ★ 99.0 18 180 • • • • • • 1)
J1 12.65 115.0 18 172 • • • • • • 1)
H1 11.50 ★ 126.0 18 167 • • • • • • 1)
G1 10.72 ★ 135.0 24 159 • • • • • • 1)
F1 9.72 149.0 24 159 • • • • • • 1)
E1 8.85 ★ 164.0 25 159 • • • • • • 1)
D1 7.82 185.0 25 159 • • • • • • 1)
C1 7.22 ★ 201.0 25 159 • • • • • • 1)
B1 6.22 233.0 25 152 • • • • • • 1)
A1 5.65 ★ 257.0 25 148 • • • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/63

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.48-D.28 M1 13 135 0.11 – 450 •
450 L1 11 332 ★ 0.12 – 450 • •
K1 9 735 0.14 – 450 • •
J1 8 963 ★ 0.16 – 450 • • •
H1 8 148 0.17 – 450 • • •
G1 7 212 ★ 0.19 – 450 • • •
F1 6 041 0.23 – 450 • • •
E1 5 151 ★ 0.27 – 450 • • •
D1 4 378 ★ 0.32 – 450 • • •
4 C1 3 805 0.37 – 450 • • •
B1 3 312 ★ 0.42 – 450 • • •
A1 2 987 0.47 – 450 • • •
K.48-Z.28 C2 2 798 0.50 – 450 •
450 B2 2 360 ★ 0.59 – 450 • •
A2 2 095 0.67 – 450 • •
X1 1 837 ★ 0.76 – 450 • • •
W1 1 644 0.85 – 450 • • •
V1 1 459 ★ 0.96 – 450 • • •
U1 1 279 1.10 – 450 • • •
T1 1 124 ★ 1.30 – 450 • • •
S1 1 015 1.40 – 450 • • • •
R1 885 ★ 1.60 – 450 • • •
Q1 795 1.80 – 450 • • •
P1 717 ★ 2.00 – 450 • • • •
N1 651 2.20 – 450 • • • •
M1 592 ★ 2.40 – 450 • • • •
L1 523 2.70 – 450 • • • •
K1 483 ★ 2.90 – 450 • • • •
J1 416 3.40 – 450 • • • •
H1 378 ★ 3.70 – 450 • • • •
G1 344 ★ 4.10 – 450 • • • •
F1 312 4.50 – 450 • • • •
E1 284 ★ 4.90 – 450 • • • •
D1 251 5.60 – 450 • • • •
C1 232 ★ 6.10 – 450 • • • •
B1 199 7.00 – 450 • • • •
A1 181 ★ 7.70 – 450 • • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/64 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.48 J2 169.53 ★ 8.6 14 450 • • •
256 ... 450 H2 150.76 9.6 14 450 • • •
G2 130.78 ★ 11.1 14 450 • • • •
F2 122.19 11.9 14 450 • • • •
E2 107.47 ★ 13.5 14 450 • • • •
D2 94.12 15.4 14 450 • • • • •
C2 83.25 ★ 17.4 14 450 • • • • • • 1)
B2 75.45 19.2 14 450 • • • • • • 1)
A2 66.60 ★ 22.0 14 450 • • • • • • 1)
X1 60.08 24.0 14 450 • • • • • • 1) 4
W1 54.49 ★ 27.0 14 450 • • • • • • 1)
V1 49.65 29.0 14 450 • • • • • • 1)
U1 45.41 ★ 32.0 14 450 • • • • • • 1)
T1 40.60 36.0 14 450 • • • • • • 1)
S1 37.28 ★ 39.0 14 450 • • • • • • 1)
R1 33.60 43.0 14 450 • • • • • • 1)
Q1 28.90 ★ 50.0 14 450 • • • • • • 1)
P1 27.55 ★ 53.0 16 450 • • • • • • 1)
N1 24.85 58.0 16 450 • • • • • • 1)
M1 22.54 ★ 64.0 16 450 • • • • • • 1)
L1 20.54 71.0 16 450 • • • • • • 1)
K1 18.78 ★ 77.0 17 450 • • • • • • 1)
J1 16.79 86.0 17 450 • • • • • • 1)
H1 15.42 ★ 94.0 17 450 • • • • • • 1)
G1 13.90 104.0 17 440 • • • • • • 1)
F1 11.95 ★ 121.0 17 420 • • • • • • 1)
E1 11.35 ★ 128.0 23 291 • • • • • • 1)
D1 10.15 143.0 24 284 • • • • • • 1)
C1 9.32 ★ 156.0 24 277 • • • • • • 1)
B1 8.40 173.0 24 268 • • • • • • 1)
A1 7.22 ★ 201.0 24 256 • • • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/65

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.68-D.28 M1 20 103 0.07 – 820 •
820 L1 17 343 ★ 0.08 – 820 • •
K1 14 900 0.09 – 820 • •
J1 13 717 ★ 0.10 – 820 • • •
H1 12 470 0.11 – 820 • • •
G1 11 038 ★ 0.13 – 820 • • •
F1 9 245 0.15 – 820 • • •
E1 7 883 ★ 0.18 – 820 • • •
D1 6 700 ★ 0.21 – 820 • • •
4 C1 5 823 0.24 – 820 • • •
B1 5 068 ★ 0.28 – 820 • • •
A1 4 572 0.31 – 820 • • •
K.68-Z.28 C2 4 282 0.33 – 820 •
820 B2 3 611 ★ 0.39 – 820 • •
A2 3 206 0.44 – 820 • •
X1 2 811 ★ 0.50 – 820 • • •
W1 2 515 0.56 – 820 • • •
V1 2 233 ★ 0.63 – 820 • • •
U1 1 957 0.72 – 820 • • •
T1 1 720 ★ 0.81 – 820 • • •
S1 1 554 0.90 – 820 • • • •
R1 1 354 ★ 1.00 – 820 • • •
Q1 1 216 1.20 – 820 • • •
P1 1 098 ★ 1.30 – 820 • • • •
N1 996 1.40 – 820 • • • •
M1 906 ★ 1.60 – 820 • • • •
L1 801 1.80 – 820 • • • •
K1 740 ★ 1.90 – 820 • • • •
J1 637 2.20 – 820 • • • •
H1 579 ★ 2.40 – 820 • • • •
G1 526 ★ 2.70 – 820 • • • •
F1 477 2.90 – 820 • • • •
E1 434 ★ 3.20 – 820 • • • •
D1 384 3.70 – 820 • • • •
C1 354 ★ 4.00 – 820 • • • •
B1 305 4.60 – 820 • • • •
A1 277 ★ 5.10 – 820 • • • •
 Preferred transmission ratio
1) Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/66 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.68 N2 243.72 5.9 12 820 • • •
345 ... 820 M2 215.68 ★ 6.7 12 820 • • • •
L2 196.07 7.4 12 820 • • • •
K2 176.14 ★ 8.2 12 820 • • • •
J2 150.98 9.6 12 820 • • • • •
H2 136.60 ★ 10.6 12 820 • • • • • •
G2 126.09 11.5 12 820 • • • • • •
F2 109.64 ★ 13.2 12 820 • • • • • • • 1)
E2 99.55 14.6 12 820 • • • • • • • 1)
D2 90.89 ★ 16.0 12 820 • • • • • • • 1) 4
C2 83.40 17.4 12 820 • • • • • • • 1)
B2 76.84 ★ 18.9 12 820 • • • • • • • 1)
A2 69.78 21.0 12 820 • • • • • • • 1)
X1 63.57 ★ 23.0 12 820 • • • • • • • 1)
W1 58.23 25.0 12 820 • • • • • • • 1)
V1 51.96 ★ 28.0 12 820 • • • • • • • 1)
U1 46.37 31.0 12 820 • • • • • 1)
T1 39.39 37.0 12 820 • • • • • 1)
S1 32.78 ★ 44.0 13 820 • • • • • 1)
R1 30.38 48.0 14 820 • • • • • • • 1)
Q1 27.99 ★ 52.0 14 820 • • • • • • • 1)
P1 25.42 57.0 14 820 • • • • • • • 1)
N1 23.16 ★ 63.0 14 820 • • • • • • • 1)
M1 21.22 68.0 14 820 • • • • • • • 1)
L1 18.93 ★ 77.0 14 820 • • • • • • • 1)
K1 16.89 86.0 14 820 • • • • • 1)
J1 14.35 101.0 14 812 • • • • • 1)
H1 11.94 ★ 121.0 15 768 • • • • • 1)
G1 11.41 127.0 21 434 • • • • • • • 1)
F1 10.40 ★ 139.0 21 422 • • • • • • • 1)
E1 9.52 152.0 21 411 • • • • • • • 1)
D1 8.50 ★ 171.0 21 397 • • • • • • • 1)
C1 7.58 191.0 22 383 • • • • • 1)
B1 6.44 225.0 22 365 • • • • • 1)
A1 5.36 ★ 271.0 23 345 • • • • • 1)
 Preferred transmission ratio
1) Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/67

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.88-D.28 M1 24 920 0.06 – 1 650 •
1 650 L1 21 499 ★ 0.07 – 1 650 • •
K1 18 470 0.08 – 1 650 • •
J1 17 005 ★ 0.08 – 1 650 • • •
H1 15 459 0.09 – 1 650 • • •
G1 13 683 ★ 0.10 – 1 650 • • •
F1 11 460 0.12 – 1 650 • • •
E1 9 772 ★ 0.14 – 1 650 • • •
D1 8 306 ★ 0.17 – 1 650 • • •
4 C1 7 218 0.19 – 1 650 • • •
B1 6 283 ★ 0.22 – 1 650 • • •
A1 5 667 0.25 – 1 650 • • •
K.88-Z.28 C2 5 309 0.26 – 1 650 •
1 650 B2 4 477 ★ 0.31 – 1 650 • •
A2 3 975 0.35 – 1 650 • •
X1 3 485 ★ 0.40 – 1 650 • • •
W1 3 118 0.45 – 1 650 • • •
V1 2 768 ★ 0.51 – 1 650 • • •
U1 2 426 0.58 – 1 650 • • •
T1 2 133 ★ 0.66 – 1 650 • • •
S1 1 926 0.73 – 1 650 • • • •
R1 1 679 ★ 0.83 – 1 650 • • •
Q1 1 508 0.93 – 1 650 • • •
P1 1 361 ★ 1.00 – 1 650 • • • •
N1 1 234 1.10 – 1 650 • • • •
M1 1 123 ★ 1.30 – 1 650 • • • •
L1 993 1.40 – 1 650 • • • •
K1 917 ★ 1.50 – 1 650 • • • •
J1 789 1.80 – 1 650 • • • •
H1 718 ★ 2.00 – 1 650 • • • •
G1 652 ★ 2.20 – 1 650 • • • •
F1 591 2.40 – 1 650 • • • •
E1 538 ★ 2.60 – 1 650 • • • •
D1 476 2.90 – 1 650 • • • •
C1 439 ★ 3.20 – 1 650 • • • •
B1 378 3.70 – 1 650 • • • •
A1 344 ★ 4.10 – 1 650 • • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/68 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.88 M2 302.68 ★ 4.8 10 1 540 • • • •
651 ... 1 650 L2 272.95 5.3 10 1 650 • • • •
K2 246.13 ★ 5.9 10 1 650 • • • •
J2 215.25 6.7 10 1 650 • • • • •
H2 193.24 ★ 7.5 10 1 650 • • • • • •
G2 176.50 8.2 10 1 650 • • • • • •
F2 156.63 ★ 9.3 10 1 650 • • • • • • •
E2 144.58 10.0 10 1 650 • • • • • • •
D2 130.77 ★ 11.1 10 1 650 • • • • • • •
C2 120.42 12.0 10 1 650 • • • • • • • 4
B2 111.37 ★ 13.0 10 1 650 • • • • • • • • 1)
A2 103.38 14.0 10 1 650 • • • • • • • • 1)
X1 91.22 ★ 15.9 10 1 650 • • • • • • • • 1)
W1 84.21 17.2 10 1 650 • • • • • • • • 1)
V1 75.45 ★ 19.2 10 1 650 • • • • • • • • 1)
U1 69.57 21.0 10 1 650 • • • • • • 1)
T1 58.37 25.0 10 1 650 • • • • • • 1)
S1 49.80 ★ 29.0 10 1 650 • • • • • • 1)
Q1 41.50 35.0 10 1 650 • • • • 1)
P1 34.40 ★ 42.0 10 1 650 • • • • 1)
N1 30.87 ★ 47.0 12 1 650 • • • • • • • • 1)
M1 28.50 51.0 12 1 650 • • • • • • • • 1)
L1 25.53 ★ 57.0 12 1 650 • • • • • • • • 1)
K1 23.54 62.0 12 1 650 • • • • • • 1)
J1 19.75 73.0 12 1 572 • • • • • • 1)
H1 16.85 ★ 86.0 12 1 498 • • • • • • 1)
G1 14.04 103.0 12 1 417 • • • • 1)
F1 11.64 ★ 125.0 12 1 339 • • • • 1)
E1 11.21 129.0 18 806 • • • • • • 1)
D1 9.41 154.0 18 764 • • • • • • 1)
C1 8.03 ★ 181.0 19 728 • • • • • • 1)
B1 6.69 217.0 19 689 • • • • 1)
A1 5.54 ★ 262.0 19 651 • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/69

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.108-D38 P1 58 914 0.02 – 3 000 • • •
3 000 N1 52 306 0.03 – 3 000 • • •
M1 45 858 0.03 – 3 000 • • • •
L1 41 037 0.04 – 3 000 • • • •
K1 36 423 0.04 – 3 000 • • • •
J1 31 918 0.05 – 3 000 • • • •
H1 28 064 0.05 – 3 000 • • • •
G1 25 354 0.06 – 3 000 • • • •
F1 22 093 0.07 – 3 000 • • • •
4 E1 19 842 0.07 – 3 000 • • • •
D1 17 913 0.08 – 3 000 • • • •
C1 16 241 0.09 – 3 000 • • • •
B1 14 778 0.10 – 3 000 • • • •
A1 13 066 0.11 – 3 000 • • • •
K.108-Z38 W1 13 556 0.11 – 3 000 • • •
3 000 V1 12 055 0.12 – 3 000 • • •
U1 10 457 0.14 – 3 000 • • • •
T1 9 771 0.15 – 3 000 • • • •
S1 8 593 0.17 – 3 000 • • • •
R1 7 526 0.19 – 3 000 • • • • •
Q1 6 657 0.22 – 3 000 • • • • •
P1 6 033 0.24 – 3 000 • • • • •
N1 5 326 0.27 – 3 000 • • • • •
M1 4 804 0.30 – 3 000 • • • • •
L1 4 357 0.33 – 3 000 • • • • •
K1 3 970 0.37 – 3 000 • • • • •
J1 3 631 0.40 – 3 000 • • • • •
H1 3 247 0.45 – 3 000 • • • • •
G1 2 981 0.49 – 3 000 • • • • •
F1 2 687 0.54 – 3 000 • • • • •
E1 2 311 0.63 – 3 000 • • • • •
D1 2 060 0.70 – 3 000 • • • • •
C1 1 892 0.77 – 3 000 • • • • •
B1 1 705 0.85 – 3 000 • • • • •
A1 1 466 0.99 – 3 000 • • • • •
K.108-Z48 P1 1 343 1.08 – 3 000 • • • • • •
3 000 N1 1 233 1.18 – 3 000 • • • • • •
M1 1 136 1.28 – 3 000 • • • • • •
L1 1 031 1.41 – 3 000 • • • • • •
K1 940 1.54 – 3 000 • • • • • •
J1 861 1.68 – 3 000 • • • • • •
H1 768 1.89 – 3 000 • • • • • •
G1 685 2.12 – 3 000 • • • •
F1 582 2.49 – 3 000 • • • •
E1 485 2.99 – 3 000 • • • •
D1 477 3.04 – 3 000 • • • • • •
C1 426 3.40 – 3 000 • • • •
B1 361 4.02 – 3 000 • • • •
A1 301 4.82 – 3 000 • • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/70 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.108 K2 307.24 4.70 10 2 906 • •
1 656 ... 3 000 J2 278.10 ★ 5.20 10 2 830 • •
H2 243.47 6.00 10 3 000 • • •
G2 219.64 ★ 6.60 10 3 000 • • • •
F2 201.11 7.20 10 3 000 • • • •
E2 178.90 ★ 8.10 10 3 000 • • • • •
D2 163.51 8.90 10 3 000 • • • • •
C2 150.31 ★ 9.60 10 3 000 • • • • •
B2 138.87 10.40 10 3 000 • • • • •
A2 128.86 ★ 11.30 10 3 000 • • • • • • 4
X1 120.03 12.10 10 3 000 • • • • • •
W1 108.52 ★ 13.40 10 3 000 • • • • • • • 1)
V1 99.90 14.50 10 3 000 • • • • • • • 1)
U1 89.85 ★ 16.10 10 3 000 • • • • • • • 1)
T1 82.90 17.50 10 3 000 • • • • • • • 1)
S1 70.24 21.00 10 3 000 • • • • • • • 1)
R1 61.22 ★ 24.00 10 3 000 • • • • • • • 1)
Q1 52.08 28.00 10 3 000 • • • • • 1)
P1 44.44 ★ 33.00 10 3 000 • • • • • 1)
N1 36.44 ★ 40.00 10 2 832 • • • • • 1)
M1 33.87 ★ 43.00 11 3 000 • • • • • • • 1)
L1 31.25 46.00 11 3 000 • • • • • • • 1)
K1 26.48 55.00 11 2 882 • • • • • • • 1)
J1 23.08 ★ 63.00 11 2 764 • • • • • • • 1)
G1 19.63 74.00 11 2 632 • • • • • 1)
F1 16.75 ★ 87.00 11 2 509 • • • • • 1)
E1 13.74 ★ 106.00 11 2 362 • • • • • 1)
D1 12.90 ★ 112.00 15 1 938 • • • • • • • 1)
C1 10.97 132.00 16 1 845 • • • • • 1)
B1 9.36 ★ 155.00 16 1 759 • • • • • 1)
A1 7.68 ★ 189.00 16 1 656 • • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/71

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.128-D38 P1 56 640 ★ 0.03 – 4 700 • • •
4 700 N1 50 287 0.03 – 4 700 • • •
M1 44 087 ★ 0.03 – 4 700 • • • •
L1 39 453 0.04 – 4 700 • • • •
K1 35 017 ★ 0.04 – 4 700 • • • •
J1 30 686 0.05 – 4 700 • • • •
H1 26 980 ★ 0.05 – 4 700 • • • •
G1 24 375 0.06 – 4 700 • • • •
F1 21 240 ★ 0.07 – 4 700 • • • •
4 E1 19 076 0.08 – 4 700 • • • •
D1 17 221 ★ 0.08 – 4 700 • • • •
C1 15 614 0.09 – 4 700 • • • •
B1 14 208 ★ 0.10 – 4 700 • • • •
A1 12 562 0.12 – 4 700 • • • •
K.128-Z38 W1 13 032 ★ 0.11 – 4 700 • • •
4 700 V1 11 590 0.13 – 4 700 • • •
U1 10 054 ★ 0.14 – 4 700 • • • •
T1 9 394 0.15 – 4 700 • • • •
S1 8 262 ★ 0.18 – 4 700 • • • •
R1 7 236 0.20 – 4 700 • • • • •
Q1 6 400 ★ 0.23 – 4 700 • • • • •
P1 5 800 0.25 – 4 700 • • • • •
N1 5 120 ★ 0.28 – 4 700 • • • • •
M1 4 619 0.31 – 4 700 • • • • •
L1 41 89 ★ 0.35 – 4 700 • • • • •
K1 3 817 0.38 – 4 700 • • • • •
J1 3 491 ★ 0.42 – 4 700 • • • • •
H1 3 121 0.46 – 4 700 • • • • •
G1 2 866 ★ 0.51 – 4 700 • • • • •
F1 2 583 0.56 – 4 700 • • • • •
E1 2 221 ★ 0.65 – 4 700 • • • • •
D1 1 981 0.73 – 4 700 • • • • •
C1 1 819 ★ 0.80 – 4 700 • • • • •
B1 1 639 0.88 – 4 700 • • • • •
A1 1 410 ★ 1.03 – 4 700 • • • • •
K.128-Z48 P1 1 400 1.04 – 4 700 • • • • • •
4 700 N1 1 284 1.13 – 4 700 • • • • • •
M1 1 183 1.23 – 4 700 • • • • • •
L1 1 074 1.35 – 4 700 • • • • • •
K1 979 1.48 – 4 700 • • • • • •
J1 897 1.62 – 4 700 • • • • • •
H1 800 1.81 – 4 700 • • • • • •
G1 714 2.03 – 4 700 • • • •
F1 606 2.39 – 4 700 • • • •
E1 505 2.87 – 4 700 • • • •
D1 497 2.92 – 4 700 • • • • • •
C1 443 3.27 – 4 700 • • • •
B1 377 3.85 – 4 700 • • • •
A1 313 4.63 – 4 700 • • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/72 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.128 L2 295.38 ★ 4.9 8 4 700 • • •
2 707 ... 4 700 K2 270.90 5.4 8 4 700 • • •
J2 242.02 ★ 6.0 8 4 700 • • • •
H2 221.64 6.5 8 4 700 • • • •
G2 204.18 ★ 7.1 8 4 700 • • • •
F2 189.04 7.7 8 4 700 • • • •
E2 175.80 ★ 8.2 8 4 700 • • • • •
D2 164.11 8.8 8 4 700 • • • • •
C2 146.84 ★ 9.9 8 4 700 • • • • • • •
B2 136.06 10.7 8 4 700 • • • • • • • 4
A2 124.73 ★ 11.6 8 4 700 • • • • • • • • 1)
X1 114.34 12.7 8 4 700 • • • • • • • • 1)
W1 97.44 14.9 8 4 700 • • • • • • • • 1)
V1 85.98 ★ 16.9 8 4 700 • • • • • • • • 1)
U1 73.18 19.8 8 4 700 • • • • • • • 1)
T1 63.41 ★ 23.0 8 4 700 • • • • • • • 1)
S1 53.36 ★ 27.0 8 4 700 • • • • • • • 1)
R1 48.14 30.0 8 4 700 • • • • • 1)
Q1 41.38 ★ 35.0 8 4 700 • • • • • 1)
P1 39.19 ★ 37.0 9 4 700 • • • • • • • • 1)
N1 35.92 40.0 9 4 700 • • • • • • • • 1)
M1 30.61 47.0 9 4 700 • • • • • • • • 1)
L1 27.02 ★ 54.0 9 4 700 • • • • • • • • 1)
K1 22.99 63.0 9 4 700 • • • • • • • 1)
J1 19.92 ★ 73.0 9 4 700 • • • • • • • 1)
H1 16.76 ★ 87.0 9 4 700 • • • • • • • 1)
G1 15.13 96.0 9 4 626 • • • • • 1)
F1 13.00 ★ 112.0 10 4 419 • • • • • 1)
E1 12.56 115.0 13 3 217 • • • • • • • 1)
D1 10.88 ★ 133.0 13 3 081 • • • • • • • 1)
C1 9.16 ★ 158.0 13 2 924 • • • • • • • 1)
B1 8.26 176.0 14 2 834 • • • • • 1)
A1 7.10 ★ 204.0 14 2 707 • • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/73

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.148-D38 P1 58 692 0.02 – 8 000 • • •
8 000 N1 52 109 0.03 – 8 000 • • •
M1 45 684 0.03 – 8 000 • • • •
L1 40 882 0.04 – 8 000 • • • •
K1 36 286 0.04 – 8 000 • • • •
J1 31 797 0.05 – 8 000 • • • •
H1 27 958 0.05 – 8 000 • • • •
G1 25 258 0.06 – 8 000 • • • •
F1 22 009 0.07 – 8 000 • • • •
4 E1 19 767 0.07 – 8 000 • • • •
D1 17 845 0.08 – 8 000 • • • •
C1 16 180 0.09 – 8 000 • • • •
B1 14 722 0.10 – 8 000 • • • •
A1 13 017 0.11 – 8 000 • • • •
K.148-Z38 W1 13 505 0.11 – 8 000 • • •
8 000 V1 12 009 0.12 – 8 000 • • •
U1 10 418 0.14 – 8 000 • • • •
T1 9 734 0.15 – 8 000 • • • •
S1 8 561 0.17 – 8 000 • • • •
R1 7 498 0.19 – 8 000 • • • • •
Q1 6 632 0.22 – 8 000 • • • • •
P1 6 010 0.24 – 8 000 • • • • •
N1 5 305 0.27 – 8 000 • • • • •
M1 4 786 0.30 – 8 000 • • • • •
L1 4 341 0.33 – 8 000 • • • • •
K1 3 955 0.37 – 8 000 • • • • •
J1 3 617 0.40 – 8 000 • • • • •
H1 3 234 0.45 – 8 000 • • • • •
G1 2 970 0.49 – 8 000 • • • • •
F1 2 677 0.54 – 8 000 • • • • •
E1 2 302 0.63 – 8 000 • • • • •
D1 2 053 0.71 – 8 000 • • • • •
C1 1 885 0.77 – 8 000 • • • • •
B1 1 699 0.85 – 8 000 • • • • •
A1 1 466 0.99 – 8 000 • • • • •
K.148-Z68 L1 1 392 1.04 – 8 000 • • • • • • •
8 000 K1 1 247 1.16 – 8 000 • • • • • • •
J1 1 150 1.26 – 8 000 • • • • •
H1 965 1.50 – 8 000 • • • • •
G1 823 1.76 – 8 000 • • • • •
F1 686 2.11 – 8 000 • • •
E1 569 2.55 – 8 000 • • •
D1 502 2.89 – 8 000 • • • • •
C1 428 3.39 – 8 000 • • • • •
B1 357 4.06 – 8 000 • • •
A1 296 4.90 – 8 000 • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/74 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.148 N2 306.08 4.7 7 8 000 • •
3 320 ... 8 000 M2 274.42 ★ 5.3 7 8 000 • • •
L2 251.55 5.8 7 8 000 • • •
K2 231.95 ★ 6.3 7 8 000 • • •
J2 214.96 6.7 7 8 000 • • •
H2 204.38 ★ 7.1 7 8 000 • • • •
G2 191.02 7.6 7 8 000 • • • •
F2 168.50 ★ 8.6 7 8 000 • • • • • •
E2 158.93 9.1 7 8 000 • • • • • •
D2 142.41 ★ 10.2 7 8 000 • • • • • • • 4
C2 131.49 11.0 7 8 000 • • • • • • •
B2 112.35 12.9 7 8 000 • • • • • • • • 1)
A2 101.53 ★ 14.3 7 8 000 • • • • • • • • 1)
X1 97.82 14.8 7 8 000 • • • • • • • 1)
W1 84.61 17.1 7 8 000 • • • • • • • • 1)
V1 73.80 ★ 19.6 7 8 000 • • • • • • • • 1)
U1 63.16 ★ 23.0 7 8 000 • • • • • • • • 1)
T1 56.57 26.0 7 8 000 • • • • • • 1)
R1 47.91 ★ 30.0 7 8 000 • • • • • • 1)
Q1 41.38 35.0 7 8 000 • • • • • 1)
N1 31.10 ★ 47.0 7 8 000 • • • • • 1)
M1 30.74 47.0 8 8 000 • • • • • • • 1)
L1 26.58 55.0 8 8 000 • • • • • • • • 1)
K1 23.19 ★ 63.0 8 8 000 • • • • • • • • 1)
J1 19.84 ★ 73.0 9 8 000 • • • • • • • • 1)
H1 17.77 82.0 9 8 000 • • • • • • 1)
G1 15.05 ★ 96.0 9 7 603 • • • • • • 1)
F1 13.00 112.0 9 7 273 • • • • • 1)
E1 9.77 ★ 148.0 9 6 670 • • • • • 1)
D1 8.79 165.0 13 3 980 • • • • • • 1)
C1 7.44 ★ 195.0 13 3 785 • • • • • • 1)
B1 6.43 226.0 13 3 620 • • • • • 1)
A1 4.83 ★ 300.0 13 3 320 • • • • • 1)
 Preferred transmission ratio
1)
Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/75

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.168-D48 P1 60 115 ★ 0.02 – 13 500 • • •
13 500 N1 53 459 0.03 – 13 500 • • •
M1 46 374 ★ 0.03 – 13 500 • • • •
L1 43 330 0.03 – 13 500 • • • •
K1 38 109 ★ 0.04 – 13 500 • • • •
J1 33 375 0.04 – 13 500 • • • • •
H1 29 521 ★ 0.05 – 13 500 • • • • •
G1 26 754 0.05 – 13 500 • • • • •
F1 23 617 ★ 0.06 – 13 500 • • • • •
4 E1 21 304 0.07 – 13 500 • • • • •
D1 19 323 ★ 0.08 – 13 500 • • • • •
C1 17 605 0.08 – 13 500 • • • • •
B1 16 102 ★ 0.09 – 13 500 • • • • •
A1 14 397 0.10 – 13 500 • • • • •
K.168-Z48 A2 14 767 0.10 – 13 500 • • •
13 500 X1 13 068 ★ 0.11 – 13 500 • • • •
W1 11 880 0.12 – 13 500 • • • •
V1 10 673 ★ 0.14 – 13 500 • • • •
U1 9 148 0.16 – 13 500 • • • • •
T1 8 277 ★ 0.18 – 13 500 • • • • • •
S1 7 640 0.19 – 13 500 • • • • • •
R1 6 643 ★ 0.22 – 13 500 • • • • • •
Q1 6 032 0.24 – 13 500 • • • • • •
P1 5 507 ★ 0.26 – 13 500 • • • • • •
N1 5 053 0.29 – 13 500 • • • • • •
M1 4 656 ★ 0.31 – 13 500 • • • • • •
L1 4 228 0.34 – 13 500 • • • • • •
K1 3 852 ★ 0.38 – 13 500 • • • • • •
J1 3 528 0.41 – 13 500 • • • • • •
H1 3 148 ★ 0.46 – 13 500 • • • • • •
G1 2 810 0.52 – 13 500 • • • • • •
F1 2 386 0.61 – 13 500 • • • • • •
E1 1 986 ★ 0.73 – 13 500 • • • • • •
D1 1 955 ★ 0.74 – 13 500 • • • • • •
C1 1 745 0.83 – 13 500 • • • •
B1 1 482 0.98 – 13 500 • • • •
A1 1 233 ★ 1.18 – 13 500 • • • •
K.168-Z68 H1 1 033 1.40 – 13 500 • • • • •
13 500 G1 881 1.65 – 13 500 • • • • •
F1 735 1.97 – 13 500 • • •
E1 609 2.38 – 13 500 • • •
D1 537 2.70 – 13 500 • • • • •
C1 458 3.17 – 13 500 • • • • •
B1 382 3.80 – 13 500 • • •
A1 317 4.57 – 13 500 • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/76 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.168 H2 287.95 ★ 5.0 7 13 500 •
5 870 ... 13 500 G2 264.18 5.5 7 13 500 •
F2 243.80 ★ 5.9 7 13 500 •
E2 226.15 6.4 7 13 500 •
D2 213.33 ★ 6.8 7 13 500 • •
C2 199.54 7.3 7 13 500 • •
B2 177.43 ★ 8.2 7 13 500 • • • •
A2 167.50 8.7 7 13 500 • • • •
X1 150.36 ★ 9.6 7 13 500 • • • • •
W1 138.00 10.5 7 13 500 • • • • • 4
V1 119.09 12.2 7 13 500 • • • • • •
U1 104.18 13.9 7 13 500 • • • • • •
T1 90.60 16.0 7 13 500 • • • • • •
S1 79.49 ★ 18.2 7 13 500 • • • • • •
R1 67.22 ★ 22.0 7 13 500 • • • • • •
Q1 60.99 24.0 7 13 500 • • • • • •
P1 53.18 ★ 27.0 7 13 500 • • • • • •
N1 45.15 32.0 7 13 500 • • • • •
M1 34.55 ★ 42.0 7 13 500 • • • • • • 1)
L1 32.53 45.0 8 13 500 • • • • • • • 1)
K1 28.54 ★ 51.0 8 13 500 • • • • • • • 1)
J1 24.14 ★ 60.0 8 13 500 • • • • • • • 1)
H1 21.90 66.0 8 13 086 • • • • • • • 1)
G1 19.09 ★ 76.0 8 12 553 • • • • • • • 1)
F1 16.21 89.0 8 11 946 • • • • • • 1)
E1 12.41 ★ 117.0 8 11 016 • • • • • • 1)
D1 11.67 124.0 12 6 973 • • • • • • • 1)
C1 10.17 ★ 143.0 12 6 689 • • • • • • • 1)
B1 8.64 168.0 12 6 366 • • • • • • 1)
A1 6.61 ★ 219.0 12 5 870 • • • • • • 1)
 Preferred transmission ratio
1) Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/77

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.188-D68 T1 53 767 0.03 – 20 000 • • •
20 000 S1 47 582 ★ 0.03 – 20 000 • • • •
R1 43 256 0.03 – 20 000 • • • •
Q1 38 858 ★ 0.04 – 20 000 • • • •
P1 33 307 0.04 – 20 000 • • • • •
N1 30 135 ★ 0.05 – 20 000 • • • • •
M1 27 817 0.05 – 20 000 • • • • •
L1 24 187 ★ 0.06 – 20 000 • • • • •
K1 21 961 0.07 – 20 000 • • • • •
4 J1 20 052 ★ 0.07 – 20 000 • • • • •
H1 18 398 0.08 – 20 000 • • • • •
G1 16 951 ★ 0.09 – 20 000 • • • • •
F1 15 394 0.09 – 20 000 • • • • •
E1 14 024 ★ 0.10 – 20 000 • • • • •
D1 12 847 0.11 – 20 000 • • • • •
C1 11 463 ★ 0.13 – 20 000 • • • • •
B1 10 230 0.14 – 20 000 • • •
A1 8 689 0.17 – 20 000 • • •
K.188-Z68 X1 9 201 ★ 0.16 – 20 000 • • • •
20 000 W1 8 047 0.18 – 20 000 • • • • •
V1 7 224 ★ 0.20 – 20 000 • • • • • •
U1 6 598 0.22 – 20 000 • • • • • •
T1 5 855 ★ 0.25 – 20 000 • • • • • • •
S1 5 405 0.27 – 20 000 • • • • • • •
R1 4 889 ★ 0.30 – 20 000 • • • • • • •
Q1 4 502 0.32 – 20 000 • • • • • • •
P1 4 163 ★ 0.35 – 20 000 • • • • • • •
N1 3 865 0.38 – 20 000 • • • • • • •
M1 3 410 ★ 0.43 – 20 000 • • • • • • •
L1 3 148 0.46 – 20 000 • • • • • • •
K1 2 821 ★ 0.51 – 20 000 • • • • • • •
J1 2 601 0.56 – 20 000 • • • • •
H1 2 182 0.66 – 20 000 • • • • •
G1 1 862 ★ 0.78 – 20 000 • • • • •
F1 1 551 0.93 – 20 000 • • •
E1 1 286 ★ 1.10 – 20 000 • • •
D1 1 135 1.30 – 20 000 • • • • •
C1 968 ★ 1.50 – 20 000 • • • • •
B1 807 1.80 – 20 000 • • •
A1 669 ★ 2.20 – 20 000 • • •
K.188-Z88 H1 669 ★ 2.2 – 20 000 • • • •
20 000 G1 548 ★ 2.6 – 20 000 • • • •
F1 503 2.9 – 20 000 • • • •
E1 429 ★ 3.4 – 20 000 • • • •
D1 352 ★ 4.1 – 20 000 • • • •
C1 321 4.5 – 20 000 • • • •
B1 274 ★ 5.3 – 20 000 • • • •
A1 225 ★ 6.4 – 20 000 • • • •
 Preferred transmission ratio
1) Only possible with integrated motor.
2)
Twisting angle applies to reduced-backlash gearboxes.
In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

4/78 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Transmission ratios and maxiumum torques

■ Selection and ordering data (continued)

Gearbox size Ratio code Transmis- Output Twisting Nominal Permissible input torque T1 [Nm]
Order No. sion ratio speed angle 2) torque
2.5x the value is permissible for a brief period (e.g. motor starting torque)
Max. gearbox 3 3 5 10 20 26 61 98 198 198 291 356 580 1290
torque
15th and i tot n2 (50 Hz) ϕ T2N (fB=1) Motor size
16th position
Nm rpm arcmin Nm 63 71 80 90 100 112 132 160 180 220 225 250 280 315
K.188 U1 191.34 7.6 6 20 000 • • • • •
17 500 ... T1 172.78 8.4 6 20 000 • • •
20 000
S1 161.92 9.0 6 20 000 • • • • •
R1 139.08 ★ 10.4 6 20 000 • • • • •
Q1 120.16 12.1 6 20 000 • • • • • • •
P1 106.07 13.7 6 20 000 • • • • • • •
N1 95.48 ★ 15.2 6 20 000 • • • • • • •
M1 79.23 ★ 18.3 6 20 000 • • • • • • •
L1 72.24 20.0 6 20 000 • • • • • • •
K1 63.38 ★ 23.0 6 20 000 • • • • • • • 4
J1 54.47 27.0 7 20 000 • • • • • • •
H1 42.43 ★ 34.0 7 20 000 • • • • • • •
G1 34.28 ★ 42.0 7 20 000 • • • • • • •
F1 28.45 ★ 51.0 7 20 000 • • • • • • •
E1 25.94 56.0 7 20 000 • • • • • • •
D1 22.76 ★ 64.0 7 20 000 • • • • • • •
C1 19.56 74.0 7 20 000 • • • • • • •
B1 15.23 ★ 95.0 7 19 000 • • • • • • •
A1 12.10 ★ 120.0 8 17 500 • • • • • •
 Preferred transmission ratio
1)
Only possible with integrated motor.
2) Twisting angle applies to reduced-backlash gearboxes.

In the case of gearboxes of size 18 or 28, only possible with integrated motor or input unit KQ and KQS.
Calculation of maximum output torque T2max for gearboxes with input units:
T2max = T1 x itot, if T2max ≤ T2N
If T2max ≥ T2N the max. output torque T2N of the gearbox is the decisive factor.

Siemens D 87.1 · 2011 4/79

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types

■ Selection and ordering data

Mounting type Order No. Code in type designation Representation
14th position 2nd position for solid shaft,
3rd position for hollow shaft

Foot-mounted design A –

4
Housing flange H Z
(C-type)

Design with D D
torque arm

Flange-mounted design F F
(A-type)

Mixer flange M M

Extruder flange E E

4/80 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types

■ Selection and ordering data (continued)

Bevel helical gearbox K with torque arm
The torque arm of bevel helical gearbox K is mounted on the un-
derside of the housing. The rubber buffers (supplied loose) are
used to flexibly support the gearbox on the torque arm.
The rubber buffers are suitable for all mounting positions and
can withstand temperatures of between –40 °C and +80 °C.
Material: Natural rubber, hardness 70 ± 5 Shore A
Order No.: D in 14th position

4
Bevel helical gearbox B with torque arm
The torque arm of bevel helical gearbox B consists of an arm The shafts and mounting positions correspond to the design
with an eye; it can be screwed onto the gearbox housing at featuring a housing flange.
an angular pitch of 30° in any one of nine positions around the
output. Order code:
Figure 1 G09
Order No.: D in 14th position Figure 2 G10

Figure 1 Figure 2

Bevel helical gearbox with mixer flange,

sizes 88 to 168
The mixer flange is fitted with a heavy-duty output bearing with
a sizable bearing span for absorbing large radial and axial
forces.
The optimized design ensures that no axial forces are trans-
ferred to the gearbox housing.
Bearing life can be calculated on request or using the MOTOX
Configurator calculation program.

Siemens D 87.1 · 2011 4/81

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types

■ Selection and ordering data (continued)

Bevel helical gearbox with extruder flange, sizes 68 to 168
Gearboxes with an extruder flange are ideal for use in the
extrusion industry, particularly in the low to medium performance
range.

1 2

5 4 3

1. Large axial spherical roller bearing 4. Optimum lubrication

294... series spherical roller bearing for heavy axial loads. Extruder oil chamber separate from gearbox oil chamber.

2. Simple, low-cost design 5. Standard connection

Flange hub supplied by customer, no grinding processes. Metric thread for supporting the extruder worm
Standard shaft-hub connection with feather key in acc. with (worm pulled out from rear).
DIN 6885/1.

3. Good radial eccentricity

Radial bearing hole and center hole created in one clamping
operation and direction.

Area of application

Parallel shaft gearbox KAE 68 KAE 88 KAE 108 KAE 128 KAE 148 KAE 168
Max. power [kW] 9.2 15 30 45 55 90
Transmission ratio/min./max [3-stage] 5.36 / 243.72 5.54 / 302.68 7.68 / 307.24 7.1 / 295.38 4.83 / 306.08 6.61 / 287.95
Max. torque [Nm] 820 1 650 3 000 4 700 8 000 13 500
Max. axial forces [kN] 65 105 180 260 400 580
Spherical roller bearing [.] 29414E 29417E 29420E 29424E 29426E 29432E

4/82 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Shaft designs

■ Selection and ordering data

Shaft design Order No. Order No. Shaft dimensions
8th suffix
position
Bevel helical gearboxes B and K, foot-mounted design
Size B.28 B.38 K.38 K.48 K.68 K.88
Solid shaft with 1 V20 x 40 *) V30 x 60 *) V25 x 50 *) V30 x 60 *) V40 x 80 *) V50 x 100 *)
feather key
3 V35 x 70 V50 x 100 V70 x 140
4 V40 x 80 V35 x 70
Hollow shaft 5 H20 x 120 *) H30 x 140 *) H30 x 120 *) H35 x 150 *) H40 x 180 *) H50 x 210 *)
6 H25 x 120 H35 x 140 H40 x 150 H45 x 180 H60 x 210
7 H40 x 140
Hollow shaft with 9 H3A H20 x 142 *) H30 x 166 *) H30 x 146 *) H40 x 177 H50 x 209 H60 x 241
shrink disk
9 H3B H35 x 166 H30/31 x 146 H40/41 x 177 H50/51 x 209 H60/61 x 241
9 H3C H35 x 177 *) H40 x 209 *) H50 x 241 *) 4
9 H3D H40/42 x 209 H50/52 x 241
Hollow shaft with 9 H4A N30x1.25x30x N35x1.25x30x N40x2x30x18x N50x2x30x24x N60x2x30x28
splined shaft 22 x 140 26 x 9H x 120 9H x 150 9H x 180 x 9H x 210
Size K.108 K.128 K.148 K.168 K.188
Solid shaft with 1 V60 x 120 *) V70 x 140 *) V90 x 170 *) V110 x 210 *) V120 x 210 *)
feather key
3 V80 x 170 V90 x 170 V100 x 210 V120 x 210 V140 x 250
) )
Hollow shaft 5 H60 x 240 * H70 x 300 * H80 x 350 H100 x 410 H120 x 500 *)
) )
6 H70 x 240 H80 x 300 H90 x 350 * H110 x 410 *
Hollow shaft with 9 H3A H70 x 280 H80 x 345 H95 x 404 *) H105 x 483 *) H125 x 580 *)
shrink disk
9 H3B H70/71 x 280 H80/81 x 345 H95/96 x 404 H105/106 x 483 H125/126 x 580
9 H3C H65 x 280 H75 x 345
9 H3D H65/66 x 280 H75/76 x 345
Hollow shaft with 9 H4A N70x2x30x34 N80x3x30x25 N90x3x30x28 N110x3x30x35 N130x5x30x24x
splined shaft x 9H x 240 x 9H x 300 x 9H x 350 x9H x 410 9H x 500
Bevel helical gearboxes B and K with housing flange
Size B.Z28 B.Z38 K.Z38 K.Z48 K.Z68 K.Z88
Solid shaft with 1 V20 x 40 *) V30 x 60 *) V25 x 50 *) V30 x 60 *) V40 x 80 *) V50 x 100 *)
feather key
3 V35 x 70 V50 x 100 V70 x 140
4 V40 x 80 V35 x 70
Hollow shaft 5 H20 x 120 *) H30 x 140 *) H30 x 120 *) H35 x 150 *) H40 x 180 *) H50 x 210 *)
6 H25 x 120 H35 x 140 H40 x 150 H45 x 180 H60 x 210
7 H40 x 140
Hollow shaft with 9 H3A H20 x 142 *) H30 x 166 *) H30 x 146 *) H40 x 177 H50 x 209 H60 x 241
shrink disk
9 H3B H35 x 166 H30/31 x 146 H40/41 x 177 H50/51 x 209 H60/61 x 241
) )
9 H3C H35 x 177 * H40 x 209 * H50 x 241 *)
9 H3D H40/42 x 209 H50/52 x 241
Hollow shaft with 9 H4A N30x1.25x30x N35x1.25x30x N40x2x30x18x N50x2x30x24x N60x2x30x28
splined shaft 22 x 140 26 x 9H x 120 9H x 150 9H x 180 x 9H x 210
Size K.Z108 K.Z128 K.Z148 K.Z168 K.Z188
Solid shaft with 1 V60 x 120 *) V70 x 140 *) V90 x 170 *) V110 x 210 *) V120 x 210 *)
feather key
3 V80 x 170 V90 x 170 V100 x 210 V120 x 210 V140 x 250
Hollow shaft 5 H60 x 240 *) H70 x 300 *) H80 x 350 H100 x 410 H120 x 500 *)
6 H70 x 240 H80 x 300 H90 x 350 *) H110 x 410 *)
Hollow shaft with 9 H3A H70 x 280 H80 x 345 H95 x 404 *) H105 x 483 *) H125 x 580 *)
shrink disk
9 H3B H70/71 x 280 H80/81 x 345 H95/96 x 404 H105/106 x 483 H125/126 x 580
9 H3C H65 x 280 H75 x 345
9 H3D H65/66 x 280 H75/76 x 345
Hollow shaft with 9 H4A N70x2x30x34 N80x3x30x25 N90x3x30x28 N110x3x30x35 N130x5x30x24x
splined shaft x 9H x 240 x 9H x 300 x 9H x 350 x9H x 410 9H x 500
*) Preferred series

Siemens D 87.1 · 2011 4/83

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Shaft designs

■ Selection and ordering data (continued)

Shaft design Order No. Order No. Shaft dimensions
8th position suffix
Bevel helical gearboxes B and K with torque arm
Shaft design B.D28 B.D38 K.D38 K.D48 K.D68 K.D88
Hollow shaft 5 H20 x 120 *) H30 x 140 *) H30 x 120 *) H35 x 150 *) H40 x 180 *) H50 x 210 *)
6 H25 x 120 H35 x 140 H40 x 150 H45 x 180 H60 x 210
7 H40 x 140
Hollow shaft with 9 H3A H20 x 142 *) H30 x 166 *) H30 x 146 *) H40 x 177 H50 x 209 H60 x 241
shrink disk
9 H3B H35 x 166 H30/31 x 146 H40/41 x 177 H50/51 x 209 H60/61 x 241
9 H3C H35 x 177 *) H40 x 209 *) H50 x 241 *)
9 H3D H40/42 x 209 H50/52 x 241
Hollow shaft with 9 H4A N30x1.25x30x N35x1.25x30x N40x2x30x18x N50x2x30x24x N60x2x30x28
4 splined shaft
Size K.D108
22 x 140
K.D128
26 x 9H x 120 9H x 150
K.D148 K.D168
9H x 180 x 9H x 210
K.D188
Hollow shaft 5 H60 x 240 *) H70 x 300 *) H80 x 350 H100 x 410 H120 x 500 *)
6 H70 x 240 H80 x 300 H90 x 350 *) H110 x 410 *)
Hollow shaft with 9 H3A H70 x 280 H80 x 345 H95 x 404 *) H105 x 483 *) H125 x 580 *)
shrink disk
9 H3B H70/71 x 280 H80/81 x 345 H95/96 x 404 H105/106 x 483 H125/126 x 580
9 H3C H65 x 280 H75 x 345
9 H3D H65/66 x 280 H75/76 x 345
Hollow shaft with 9 H4A N70x2x30x34x N80x3x30x25 N90x3x30x28 N110x3x30x35 N130x5x30x24
splined shaft 9H x 240 x 9H x 300 x 9H x 350 x9H x 410 x9H x 500
Bevel helical gearboxes B and K, flange-mounted design (A-type)
Size B.F28 B.F38 K.F38 K.F48 K.F68 K.F88
Solid shaft with 2 V20 x 40 V30 x 60 V25 x 50 V30 x 60 V40 x 80 V50 x 100
feather key (i2=l) *) (i2=l) *) (i2=l) *) (i2=l) *) (i2=l) *) (i2=l) *)
Hollow shaft 5 H20 x 120 *) H30 x 140 *) H30 x 120 *) H35 x 150 *) H40 x 180 *) H50 x 210 *)
6 H25 x 120 H35 x 140 H40 x 150 H45 x 180 H60 x 210
7 H40 x 140
Hollow shaft with 9 H3A H20 x 142 *) H30 x 166 *) H30 x 146 *) H40 x 177 H50 x 209 H60 x 241
shrink disk
9 H3B H35 x 166 H30/31 x 146 H40/41 x 177 H50/51 x 209 H60/61 x 241
9 H3C H35 x 177 *) H40 x 209 *) H50 x 241 *)
9 H3D H40/42 x 209 H50/52 x 241
Hollow shaft with 9 H4A N30x1.25x30x N35x1.25x30x N40x2x30x18x N50x2x30x24x N60x2x30x28
splined shaft 22 x 140 26 x 9H x 120 9H x 150 9H x 180 x 9H x 210
Size K.F108 K.F128 K.F148 K.F168 K.F188
Solid shaft with 2 V60 x 120 V70 x 140 V90 x 170 V110 x 210 V120 x 210
feather key (i2=l) *) (i2=l) *) (i2=l) *) (i2=l) *) (i2=l) *)
Hollow shaft 5 H60 x 240 *) H70 x 300 *) H80 x 350 H100 x 410 H120 x 500 *)
6 H70 x 240 H80 x 300 H90 x 350 *) H110 x 410 *)
Hollow shaft with 9 H3A H70 x 280 H80 x 345 H95 x 404 *) H105 x 483 *) H125 x 580 *)
shrink disk
9 H3B H70/71 x 280 H80/81 x 345 H95/96 x 404 H105/106 x 483 H125/126 x 580
9 H3C H65 x 280 H75 x 345
9 H3D H65/66 x 280 H75/76 x 345
Hollow shaft with 9 H4A N70x2x30x34x N80x3x30x25 N90x3x30x28 N110x3x30x35 N130x5x30x24
splined shaft 9H x 240 x 9H x 300 x 9H x 350 x9H x 410 x9H x 500
*) Preferred series

4/84 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Shaft designs

■ Selection and ordering data (continued)

Shaft designs for bevel helical gearbox with mixer flange

Shaft design Order No. Order No. Shaft dimensions

8th position suffix.
Bevel helical gearbox K.M
Size K.M88 K.M108 K.M128 K.M148 K.M168
Solid shaft with 3 V70 x 140 V80 x 170 V90 x 170 V100 x 210 V120 x 210
feather key
Hollow shaft 9 H2F H60 x 321 H70 x 366 H80 x 456 H90 x 524 H110 x 609

Shaft designs for bevel helical gearbox with extruder flange

Shaft design Order No. Order No. Shaft dimensions

8th position suffix. 4
Bevel helical gearbox KAE
Size KAE68 KAE88 KAE108 KAE128 KAE148 KAE168
Hollow shaft 9 H2A H20 x 48 H30 x 58 H40 x 71 H45 x 87 H60 x 95 H70 x 105
9 H2B H25 x 48 H35 x 58 H45 x 71 H50 x 87 H70 x 95 H80 x 105
9 H2C H30 x 48 *) H40 x 58 *) H50 x 71 *) H60 x 87 *) H75 x 95 *) H90 x 105 *)
*) Preferred series

Siemens D 87.1 · 2011 4/85

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Flange-mounted designs (A-type)

■ Selection and ordering data

Order code Flange diameter
Bevel helical gearboxes B and K
Size B.F28 B.F38 K.F38 K.F48 K.F68 K.F88 K.F108 K.F128 K.F148 K.F168 K.F188
H02 120 160 300 350 450 660
H03 160 200 250 450 550
H04 160
H05 200

4/86 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types and mounting positions

■ Selection and ordering data

The mounting type / mounting position must be specified when Position of the terminal box
you place your order to ensure that the gearbox is supplied with
the correct quantity of oil. The terminal box of the motor can be mounted in four different
positions. See Chapter 8 for an accurate representation of the
Please contact customer service to discuss the oil quantity if you terminal box position and the corresponding order codes
wish to use a mounting position which is not shown here.

Bevel helical gearbox B, foot-mounted design, flange-mounted design, and with housing flange
Oil control valves:

• Size 28: These types are lubricated for life. No ventilation, oil level, or drain plugs are present.

• Size 38: Oil inlet Oil drain A, B position of the customer's solid/plug-in shaft

1 ... 4 Position of the terminal box, see Chapter 8. 1) Standard mounting type

B: B3-00 (IM B3-00) 1)

Order code: Output side A D06, output side B D08
B: B8-00 (IM B8-00)
Order code: Output side A D68, output side B D70
4
BF, BZ: B5-01 (IM B5-01) 1) BF, BZ: B5-03 (IM B5-03)
Order code: Output side A D22, output side B D24 Order code: Output side A D32, output side B D34
BA, BAF, BAZ: H-01 1) BA, BAF, BAZ: H-02
Order code: Output side A D76, output side B D77 Order code: Output side A D78, output side B D79

4
1 B A
A B
1
4

B: B6-00 (IM B6-00) B: B7-00 (IM B7-00)

Order code: Output side A D38, output side B D40 Order code: Output side A D59, output side B D61
BF, BZ: B5-00 (IM B5-00) BF, BZ: B5-02 (IM B5-02)
Order code: Output side A D18, output side B D20 Order code: Output side A D27, output side B D29
BA, BAF, BAZ: H-04 BA, BAF, BAZ: H-03
Order code: Output side A D82, output side B D83 Order code: Output side D80, output side B D81

4
A B 2 1 3 1

1 3 4 1 2 B A

B: V5-00 (IM V5-00) B: V6-00 (IM V6-00)

Order code: Output side A E03, output side B E05 Order code: Output side A E15, output side B E17
BF, BZ: V1-00 (IM V1-00) BF, BZ: V3-00 (IM V3-00)
Order code: Output side A D90, output side B D92 Order code: Output side A D98, output side B E00
BA, BAF, BAZ: H-05 BA, BAF, BAZ: H-06
Order code: Output side A D84, output side B D85 Order code: Output side A D86, output side B D87
B A
3 1

2 2

1 3
A B

Siemens D 87.1 · 2011 4/87

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types and mounting positions

■ Selection and ordering data (continued)

Bevel helical gearbox K, foot-mounted design
Oil control valves:

• Size 38: V Oil inlet/oil drain

• From size 48 up: Oil level Ventilation Oil drain * On opposite side

A,B position of the customer's solid/plug-in shaft

1 ... 4 Position of the terminal box, see Chapter 8. 1) Standard mounting type
1)
K: B3-00 (IM B3-00) K: B8-00 (IM B8-00)
Order code: Output side A D06, output side B D08 Order code: Output side A D68, output side B D70
KA: H-01 1) KA: H-02
Order code: Output side A D76, output side B D77 Order code: Output side A D78, output side B D79

4
V
2 4
B A
1
A B
1

4 2
V

K: B6-00 (IM B6-00) K: B7-00 (IM B7-00)

Order code: Output side A D38, output side B D40 Order code: Output side A D59, output side B D61
KA: H-04 KA: H-03
Order code: Output side A D82, output side B D83 Order code: Output side A D80, output side B D81

A B 2 1 4 3 1

V
B A
1 3 4 1 2

K: V5-00 (IM V5-00) K: V6-00 (IM V6-00)

Order code: Output side A E03, output side B E05 Order code: Output side A E15, output side B E17
KA: H-05 KA: H-06
Order code: Output side A D84, output side B D85 Order code: Output side A D86, output side B D87

B A
3
1 V
2 2

V 1
3
A
B

4/88 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types and mounting positions

■ Selection and ordering data (continued)

Bevel helical gearbox K, flange-mounted design (K.F), with housing flange (K.Z) or torque arm (K.D)
Oil control valves:

• Size 38: V Oil inlet/oil drain

• From size 48 up: Oil level Ventilation Oil drain * On opposite side

A,B position of the customer's solid/plug-in shaft

1 ... 4 Position of the terminal box, see Chapter 8. 1) Standard mounting type
1)
KF: B5-01 (IM B5-01) KF: B5-03 (IM B5-03)
Order code: Output side A D22, output side B D24 Order code: Output side A D32, output side B D34
KAD, KAF, KAZ: H-01 1) KAD, KAF, KAZ: H-02
Order code: Output side A D76, output side B D77 Order code: Output side A D78, output side B D79

4
V
2 4
B A
1
A B
1

4 2
V

KF: B5-00 (IM B5-00) KF: B5-02 (IM B5-02)

Order code: Output side A D18, output side B D20 Order code: Output side A D68, output side B D29
KAD, KAF, KAZ: H-04 KAD, KAF, KAZ: H-03
Order code: Output side A D82, output side B D83 Order code: Output side A D80, output side B D81

A B 2 1 4 3 1

V
B A
1 3 4 1 2

KF: V1-00 (IM V1-00) KF: V3-00 (IM V3-00)

Order code: Output side A D90, output side B D92 Order code: Output side A D98, output side B E00
KAD, KAF, KAZ: H-05 KAD, KAF, KAZ: H-06
Order code: Output side A D84, output side B D85 Order code: Output side A D86, output side B D87

B
V A
3
1
2 2
1
V 3
A
B

Bevel helical gearbox with extruder flange (KAE)

Mounting positions correspond to those of standard gearboxes with hollow shaft.

Siemens D 87.1 · 2011 4/89

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types and mounting positions

■ Selection and ordering data (continued)

Bevel helical gearbox K with mixer flange (K.M)
Oil control valves:

Oil level Ventilation Oil drain * On opposite side

A,B position of the customer's solid/plug-in shaft

1 ... 4 Position of the terminal box, see Chapter 8. 1) Standard mounting type
1)
KM: B5-01 (IM B5-01) KM: B5-03 (IM B5-03)
Order code: Output side B D24 Order code: Output side B D34
KAM: H-01 1) KAM: H-02
Order code: Output side B D77 Order code: Output side B D79

4
2 4
B A
1 A B 1

4 2

KM: B5-00 (IM B5-00) KM: B5-02 (IM B5-02)

Order code: Output side B D20 Order code: Output side B D29
KAM: H-04 KAM: H-03
Order code: Output side B D83 Order code: Output side B D81

A B 2 1 4 3 1

B A
1 3 4 1 2

KM: V1-00 (IM V1-00) KM: V3-00 (IM V3-00)

Order code: Output side B D92 Order code: Output side B E00
KAM: H-05 KAM: H-06
Order code: Output side B D85 Order code: Output side B D87

B
A
3 1

2
2

1 3
A
B

4/90 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Mounting types and mounting positions

■ Selection and ordering data (continued)

Bevel helical tandem gearbox
The mounting type / mounting position of the tandem gearbox corresponds to that of the main gearbox. The figures below are only
designed to show the position of the oil control valves of the 2nd gearbox.
Note:
In a horizontal operating position the bulging part of the housing of the 2nd gearbox generally faces vertically downwards.
Oil control valves:
• Size 28/38 (2nd gearbox): These types are lubricated for life. No ventilation, oil level, or drain plugs are present.

• From size 48 up: Oil level Ventilation Oil drain * On opposite side

2 2-stage gearbox 3 3-stage gearbox

Main gearbox

2 *3

Main gearbox

*
Main gearbox

Siemens D 87.1 · 2011 4/91

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ Lubricants
2-stage bevel helical gearbox B
Bevel helical gearboxes B.28 and B.38 are always filled with If the gearbox is to be used in an application with special re-
synthetic lubricant prior to dispatch. The rating plate contains in- quirements, the lubricants listed in the table below can be used.
formation about the appropriate type of oil (PGLP) and ISO vis-
cosity class.
Area of application Ambient temperature 1) DIN ISO designation Order code
Standard oils
Standard temperature 0 … +60 °C CLP ISO PG VG460 K08
Low temperature usage -20 … +50 °C CLP ISO PG VG220 K07
2)
Lowest temperature usage -40 … +40 °C CLP ISO PAO VG220
Physiologically safe oils (for use in the food industry) in acc. with NSF(USDA)-H1
Standard temperature -30 … +40 °C CLP ISO H1 VG460 K11

4 Biologically degradable oils

Standard temperature -20 … +40 °C CLP ISO E VG220 K10
1) Recommendation
2) On request

3-stage bevel helical gearbox K

Bevel helical gearboxes K are filled with mineral oil as standard. If the gearbox is to be used in an application with special re-
quirements, the lubricants listed in the table below can be used.

Area of application Ambient temperature 1) DIN ISO designation Order code

Standard oils
Standard temperature -10 … +40 °C CLP ISO VG220 K06
Improved oil service life -20 … +50 °C CLP ISO PG VG220 K07
High temperature usage 0 … +60 °C CLP ISO PG VG460 K08
2)
Low temperature usage -40 … +40 °C CLP ISO PAO VG220
2)
Lowest temperature usage -40 … +10 °C CLP ISO PAO VG68
Physiologically safe oils (for use in the food industry) in acc. with NSF(USDA)-H1
Standard temperature -30 … +40 °C CLP ISO H1 VG460 K11
Biologically degradable oils
Standard temperature -20 … +40 °C CLP ISO E VG220 K10
1) Recommendation
2) On request

Size 28 does not feature any ventilation, oil level, or drain plugs.
The lubricant does not need to be changed, due to the low ther-
mal load the gearbox is subjected to. Bevel helical gearboxes of
size 38 have an oil screw; these gearboxes do not require venti-
lation or ventilation elements.
Gearboxes of sizes 48 to 188 are fitted with filler, oil level, and
drain plugs as standard. The ventilation and vent filter, which is
delivered loose, must be attached in place of the filler plug prior
to startup.

4/92 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ Oil level control

Oil sight glass
For size 48 and above, bevel helical gearbox K can be equipped Order code:
with a visual oil level indicator (oil sight glass) for most mounting Oil sight glass G34
types and mounting positions.

SW19 SW24

8
G_D087_XX_00102 G_D087_XX_00103

4
SW = Wrench width SW = Wrench width
Gearbox Size Gearbox Size
Bevel helical gearbox K.48 … K.128 Bevel helical gearbox K.148 … K.188

Electrical oil level monitoring system

If required, the gearbox can be supplied with an electrical oil
level monitoring system, which enables the oil level of the gear-
box to be monitored remotely. The oil level is monitored by a ca-
pacitive sensor only when the gearbox starts up; it is not mea-
sured continuously.

■ Gearbox ventilation
The positions of the ventilation and ventilation elements can be If required, a pressure ventilation valve can be used for bevel
seen on the mounting position diagrams. helical gearbox K, size 48 and above.

Order code K.48 … K.128 K.148 … K.188

Vent filter Ø 2 7 Ø 3 2

Order code:
G44 Ø 2 2 Ø 3 2
2 0

2 4
4

4
G _ M 0 1 5 _ X X _ 0 0 1 8 0

G _ M 0 1 5 _ X X _ 0 0 1 8 1

Pressure ventilation
valve
ø11 ø11
Order code: SW17 SW24
G45
15

14

G_D087_XX_00104 G_D087_XX_00105

SW = Wrench width

Siemens D 87.1 · 2011 4/93

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ Oil drain
Magnetic oil drain plug
A magnetic oil drain plug for inserting in the oil drainage hole is avail-
able on request for bevel helical gearboxes of size 48 and above.
This serves to collect any grit contained in the gear lubricant.
Order code:
Magnetic oil drain plug G53

Oil drain valve

An oil drain valve is available on request for bevel helical gear-
boxes of size 48 and above.
The plug valve may be designed as a complete unit featuring a
screw plug, depending on the corresponding mounting position.
Order code:
4 Oil drain valve, straight G54 An angled oil drain valve is also available on request.
.

2 1 4
3

3 2 1 4

Pos.1 Oil drain valve Pos.2 Screwed connection EGE Pos.1 Oil drain valve Pos.2 Screwed connection EGE
Pos.3 Screwed connection GE Pos.4 Screw plug Pos.3 Screwed connection GE Pos.4 Screw plug

■ Sealing
Combination shaft sealing A combination shaft sealing is particularly well suited to external
use.
A combination shaft sealing, which helps to prevent oil from leak-
ing, is available for bevel helical gearbox K of sizes 38 to 168. Order code:
Combination shaft sealing G24

1
1 • Housing
2 • Rubberized inner and outer diameter
2 3 • Grease filling prevents dry running of the sealing lips
4 • Additional sealing lips to protect against dirt
3 • Decoupled sealing system prevents scoring of the shaft as
a result of corrosion or dirt
5 • Protected running surface for radial shaft sealing ring
4
• No damage when mounting
3
G_D087_XX_00087

5 6 • Shaft

Double sealing High temperature resistant sealing

Double sealing is possible for bevel helical gearboxes of sizes High temperature resistant sealing (Viton/fluorinated rubber) for
28 and 188. Double sealing is particularly well suited to external high operating and ambient temperatures of +60 °C and above
use. are available for bevel helical gearboxes.
Order code: Order code:
Double sealing MSS1 (Sizes 18) G23 High temperature resistant sealing G25
Double radial shaft seal (Sizes 188) G22+G31

4/94 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ Hollow shaft cover (protection cover)

Gearboxes with hollow shaft are delivered with a plastic sealing Order codes:
cap as standard. Protection cover G62
They can be fitted with a fixed protection cover on request. Protection cover (ATEX) G63
Gearboxes of size 28 are fitted as standard with a steel protec- Steel protection cover G60
tion cover. Steel protection cover (ATEX) G61
The steel protection cover is the only type of cover which can be
used on gearboxes with hollow shaft and shrink disk.
For outdoor use we recommend the ATEX versions.

Gearbox Steel protection cover Protection

type cover
g7 g8 h8* h8 g6 h6 h7*
K.38 – – – – – – –

Protection
K.48 99.0 130 44.0 44.0 132 10 33 4
cover K.68 115.0 150 62.5 69.0 150 10 37
K.88 137.0 190 70.0 70.0 190 13 50
K.108 187.0 240 80.0 92.0 245 13 55
Protection K.128 233.0 292 85.0 97.0 295 16 48
cover
K.148 257.5 334 100.0 113.0 335 13 50
Steel
K.168 309.5 390 129.5 154.5 400 13 50
K.188 309.5 390 129.5 129.5 400 13 50

KA, KAS1), KAT

Gearbox Steel protection cover Protection cover

type
g7 g8 h8 g6 h6 h7
B.28 58.0 102 33.5 – – –
B.38 99.0 130 44.0 132 10 33
K.38 82.2 115 40.0 120 10 33
Protection
K.48 99.0 130 44.0 132 10 33
cover
K.68 115.0 150 62.5 150 10 37
K.88 137.0 190 70.0 190 13 50
Protection K.108 187.0 240 80.0 245 13 55
cover
K.128 233.0 292 85.0 295 16 48
Steel
K.148 257.5 334 100.0 335 13 50
K.168 309.5 390 129.5 400 13 50
K.188 309.5 390 129.5 400 13 50
BAF, BAZ, BAFS, BAZS, BAFT, BAZT
KAF, KAZ, KAFS1), KAZS1), KAFT, KAZT

1) Only a steel protection cover is available for KAS, KADS, KAFS,

and KAZS; standard protection cover for size 28

h7* / h8* = Touch protection

h7 / h8 = Touch protection and dust proof

■ Radially reinforced output shaft bearings

The bearings of the MOTOX gearboxes are dimensioned such Order code:
that they are strong enough to withstand most application cases. Radially reinforced output shaft bearing G20
However, the gearboxes can be fitted with a reinforced output
shaft bearing arrangement for applications with particularly high
radial forces.

Siemens D 87.1 · 2011 4/95

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ 2nd output shaft extension

If required, bevel helical gearboxes in a foot-mounted design Order code:
with solid shaft are available with a 2nd shaft extension. See the 2nd output shaft extension G73
dimension drawings for the corresponding design for the
relevant dimensions.

■ Bevel helical gearbox with backstop in the intermediate stage (K.X)

Bevel helical gearboxes of types KF, KAD, KAF, KAZ, KADS, Note:
KAFS, and KAZS can be supplied with a backstop in the inter-
mediate stage. The direction of rotation of the output shaft must be specified for
geared motors with a backstop. See also "Direction of rotation of
The backstop can only be attached opposite the output side A geared motors", page 1/43.
or B.
Order codes:
Non-drive-end cover (protection cover) can not be attached on
4 bevel helical gearboxes with backstop.
Output shaft direction of rotation
Clockwise K18
Order code: Counterclockwise K19
Backstop G72

Gearbox d10 o10 l10 h10 o5

K.X88 79 166.0 56.3 98 112
B A K.X108 110 192.5 70.8 112 131
K.X128 132 238.5 80.8 141 163
K.X148 145 276.5 71.0 173 191
K.X168 190 320.5 89.9 203 221

Configuring guide

Gearbox Main gearbox transmission ratio Max. permissible output torque of Oil quantity of backstop
backstop at fB=1
Nm l
K.X88 5.54 … 11.21 2 036 0.04
11.64 … 302.68 4 275 *)
K.X108 7.68 … 12.90 3 828 0.06
13.74 …307.24 6 852 *)
K.X128 7.10 … 12.56 7 595 0.09
13.00 … 295.38 13 907 *)
K.X148 4.83 … 8.79 10 450 0.11
9.77 …306.08 21 139 *)
K.X168 6.61 … 11.67 16 386 0.44
12.41 …287.95 30 750 *)

*) Data for tandem gearbox

4/96 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Special versions

■ Mixer flange in dry-well design

The agitator flange can be fitted with an additional "V" ring (1) in Order codes:
mounting position V3-00 in order to drain off any leak oil to a Dry-well design with sight glass G89
safety chamber and protect the equipment against the effects of Dry-well design with sensor G90
leakages.
The oil can either be viewed through a sight glass, or its
presence indicated by an electrical sensor (2).

Regreasing device for the mixer flange

The agitator flange gearbox can be fitted with a regreasing
device on request.

Siemens D 87.1 · 2011 4/97

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Dimension drawing overview

Representation Gearbox type Dimension drawing on page
B28 / BZ28 4/102
B38 / BZ38 4/110
K38 4/118
K48 4/128
K68 4/138
K88 4/148
K108 4/158
K128 4/168
K148 4/178
K168 4/188
K188 4/198
4 BF28 4/103
BF38 4/111
KF38 4/119
KF48 4/129
KF68 4/139
KF88 4/149
KF108 4/159
KF128 4/169
KF148 4/179
KF168 4/189
KF188 4/199
BA28 / BAZ28 4/104
BA38 / BAZ38 4/112
KA38 4/120
KA48 4/130
KA68 4/140
KA88 4/150
KA108 4/160
KA128 4/170
KA148 4/180
KA168 4/190
KA188 4/200
BAD28 4/105
BAD38 4/113
KAD38 4/121
KAD48 4/131
KAD68 4/141
KAD88 4/151
KAD108 4/161
KAD128 4/171
KAD148 4/181
KAD168 4/191
KAD188 4/201

4/98 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Dimension drawing overview (continued)

Representation Gearbox type Dimension drawing on page
BAF28 4/106
BAF38 4/114
KAF38 4/122
KAF48 4/132
KAF68 4/142
KAF88 4/152
KAF108 4/162
KAF128 4/172
KAF148 4/182
KAF168 4/192
KAF188 4/202
KAZ38 4/123 4
KAZ48 4/133
KAZ68 4/143
KAZ88 4/153
KAZ108 4/163
KAZ128 4/173
KAZ148 4/183
KAZ168 4/193
KAZ188 4/203
BAS28 / BAZS28 4/107
BAS38 / BAZS38 4/115
KAS38 4/124
KAS48 4/134
KAS68 4/144
KAS88 4/154
KAS108 4/164
KAS128 4/174
KAS148 4/184
KAS168 4/194
KAS188 4/204
BADS28 4/108
BADS38 4/116
KADS38 4/125
KADS48 4/135
KADS68 4/145
KADS88 4/155
KADS108 4/165
KADS128 4/175
KADS148 4/185
KADS168 4/195
KADS188 4/205

Siemens D 87.1 · 2011 4/99

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Dimension drawing overview (continued)

Representation Gearbox type Dimension drawing on page
BAFS28 4/109
BAFS38 4/117
KAFS38 4/126
KAFS48 4/136
KAFS68 4/146
KAFS88 4/156
KAFS108 4/166
KAFS128 4/176
KAFS148 4/186
KAFS168 4/196
KAFS188 4/206
4 KAZS38 4/127
KAZS48 4/137
KAZS68 4/147
KAZS88 4/157
KAZS108 4/167
KAZS128 4/177
KAZS148 4/187
KAZS168 4/197
KAZS188 4/207

KA.S38 ... KA.S188 4/208

KA.T38 ... KA.T188 4/209

K.38-Z28 ... K.188-Z68 4/210

4/100 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Dimension drawing overview (continued)

Representation Gearbox type Dimension drawing on page

K.M88 ... K.M168 4/213

KAE88 ... KAE168 4/215

Additional flange-mounted design 4/217

Pin holes 4/218

Siemens D 87.1 · 2011 4/101

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox B/BZ28 (2-stage), housing-flange-mounted design (C-type)

B012
BZ012

kB 100 100
k 3 55 55 3
63 -0,5 116 HH 40 40
8 M8x16 LL 32 4

Ø20 k6
Z
25
77

ØAC

Ø20 k6
35,5
35

Ø74 j7

Ø74 j7
Y X

Ø102

Ø102
Ø86
63 -0,5
35
25

9
4 25
9
25
45
90 55
DR M6x16
4
35 35 105
107

Y Z X
AD
M8x16 116
5
6

Ø86
AG

22,5
O

B.28 Weight
Motor k kB AC AD AG LL HH O B.28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 20
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 28
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/102 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BF28 (2-stage), flange-mounted design (A-type)

BF012

kB
k 3 55 120
63 -0,5 116 HH c1 40
8 45° LL f1
32 4
Ø6,6

Z
25

40
77

ØAC
35,5
35

Ø74 j7
X

Øb1 j6
0 Y

Ø102

Øa1
Ø10
63 -0,5
35

Ø20 k6
25

9
9 45
DR M6x16
25 25 90
4
35 35 105
107

a1=160
Z Y X
45° Ø9 AD
116 M8x16
5
6
Øa1

Ø13
0 Ø86
136

AG

22,5
136 O

Flange a1 b1 to2 c1 f1
A120 120 80 j6 8 3.0
A160 160 110 j6 9 3.5

BF28 Weight
Motor k kB AC AD AG LL HH O BF28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 20
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 29
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

➃ DIN 332 ➄ Feather key / keyway DIN 6885

Siemens D 87.1 · 2011 4/103

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BA/BAZ28 (2-stage), housing-flange-mounted design (C-type)

BA012
BAZ012

kB
k
63 -0,5 116 HH
8 M8x16 LL 3 55 55 3

Z
25
77

ØAC
35,5
35

Ø74 j7

Ø74 j7
Y

Ø102

Ø102
Ø86
63 -0,5
35
25

9
4 25
9
25
45
90
35 35 105
107
62 60
5

Ød H7
t 40 40

Ø40
Y Z
AD

u JS9
M8x16 116 M l9
1 l8
120
Ø86 95
AG

Ød h6
O Rmax1
4

d l9 l8 M t u
20 *) 23.4 106 M6 22.8 6
25 27.6 105 M10 28.3 8

*) Preferred series

BA.28 Weight
Motor k kB AC AD AG LL HH O BA.28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 19
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 28
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 28
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 38

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ EN ISO 4014

4/104 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAD28 (2-stage), shaft-mounted design with torque arm

BAD012

kB
k
63 -0,5 116 HH 3 55 66,5
8 45° LL 61

Z
25
77

ØAC
35,5
35

Ø74 j7
Y

Ø102
35
25

8
110

9
45
90
105
4
Ø11
62 60
107 5

Ød H7
Z t 40 40
AD
Y 116

Ø40
u JS9
M8x16
M l9
1 l8
AG

120
Ø86 95

Ød h6
Rmax1
° 4
5x45
Ø25

4
13
6
64

3 5

d l9 l8 M t u
20 *) 23.4 106 M6 22.8 6
25 27.6 105 M10 28.3 8

*) Preferred series

BAD28 Weight
Motor k kB AC AD AG LL HH O BAD28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 19
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 28
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 28
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 38

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ EN ISO 4014

Siemens D 87.1 · 2011 4/105

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAF28 (2-stage), flange-mounted design

BAF012

kB
k
63 -0,5 116 HH 3 55 80 f1
8 45° LL c1
Ø6,6
6

Z
25
77

ØAC
35,5
35

Ø74 j7

Øb1 j6
0 Y

Ø102

Øa1
Ø10
63 -0,5
35
25

9
9 45
25 25 90
35 35 105
107
62 60
5

Ød H7
t 40 40

Ø40
a1=160

u JS9
Z Y
45° Ø9 AD M l9
116 M8x16 1 l8
120
Øa1

95
Ø13
0 Ø86
136

Ød h6
AG

Rmax1
136 O 4

Flange a1 b1 to2 c1 f1 d M l9 l8 t u
A120 120 80 j6 8 3.0 20 *) M6 23.4 106 22.8 6
25 M10 27.6 105 28.3 8
A160 160 110 j6 9 3.5 20 *) M6 23.4 106 22.8 6
25 M10 27.6 105 28.3 8

*) Preferred series

BAF28 Weight
Motor k kB AC AD AG LL HH O BAF28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 19
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 28
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

➀ EN ISO 4014 ➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/106 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAS/BAZS28 (2-stage), shaft-mounted design with housing flange (C-type) and shrink disk
BAS012
BAZS012

kB
k
63 -0,5 116 HH 55 55 3
8 M8x16 LL

Z
25
77

ØAC
35,5
35

Ø74 j6
Ø102
Ø58
Ø86
63 -0,5
35
25

9
9 45
25 25 90
35 35 105
107
91 60
23 20

Z
AD
116

Ø20 H7
Ø20 H7
142
25 25
AG

O
Ø20 h6

Ø20 h6
Rmax1

BA.S28 Weight
Motor k kB AC AD AG LL HH O BA.S28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 19
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 28
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

Siemens D 87.1 · 2011 4/107

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ GGearbox BADS28 (2-stage), shaft-mounted design with torque arm and shrink disk
BADS012

kB
k
63 -0,5 116 HH 55 66,5
8 45° LL 61

Z
25
77

ØAC
35,5
35

Ø58
35
25

8
110

9
45
4 90
105
Ø11
91 60
107
Z 23 20
AD
116

Ø20 H7
Ø20 H7
AG

142
25 25
O
Ø20 h6

Ø20 h6
° Rmax1
5x45
Ø25

6 13
64

3 5

BADS28 Weight
Motor k kB AC AD AG LL HH O BADS28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 20
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 29
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

4/108 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAFS28 (2-stage), flange-mounted design and shrink disk

BAFS012

kB
k
63 -0,5 116 HH
8 45° LL 55 80 f1
c1
Ø6,6
6

Z
25
77

ØAC
35,5
35

Øb1 j6
0

Ø58

Øa1
Ø10
63 -0,5
35
25

9
9 45
25 25 90
35 35 105
107
91 60
23 20

a1=160
Z
45° Ø9 AD
116

Ø20 H7
Ø20 H7
Øa1

142
0
Ø13
136

25 25
AG

136 O
Ø20 h6

Ø20 h6
Rmax1

Flange a1 b1 to2 c1 f1
A120 120 80 j6 8 3.0
A160 160 110 j6 9 3.5

BAFS28 Weight
Motor k kB AC AD AG LL HH O BAFS28
LA71 381.5 436.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA71Z 400.5 455.5 139 146 90 90 58.5 M20x1.5/M25x1.5 10
LA90S/L 478.5 549.5 174 163 90 90 87.0 M20x1.5/M25x1.5 20
LA90ZL 523.5 594.5 174 163 90 90 211.0 M20x1.5/M25x1.5 29
LA100L 560.5 641.5 195 168 120 120 163.5 2xM32x1.5 29
LA100ZL 630.5 711.5 195 168 120 120 295.5 2xM32x1.5 39

➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/109

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox B/BZ38 (2-stage), housing-flange-mounted design (C-type)

B012
BZ012

kB
k
80 -0,5 169 HH
130 130
60° M10x17 LL 60 65 65 60
32 32 Ø9 50 3,5
11
11

Ø30 k6
80 -0,5

Z
32

ØAC

Ø30 k6
50

37

Ø95 j6

Ø95 j6
Y X
Ø115

Ø132

Ø132
80 -0,5
50

4
11
32

Ø9 3 3
DR M10x22
32 32 68 80
4
50 50 100
131,5 120

Y Z
AD
60° M10x17 X
5
8

Ø115
AG

33
O

B.38 Weight
Motor k kB AC AD AG LL HH O B.38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 26
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 30
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 31
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 37
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 40
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 50

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/110 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BF38 (2-stage), flange-mounted design (A-type)

BF012

kB
k
80 -0,5 169 HH
LL 157
45° 65 65 60
32 32 Ø9 c1
11 Øs1
11

Ø30 k6
Z
80 -0,5

32

50 3,5

ØAC

Øb1 to2
50

X
37

Ø95 j6
Y

Ø132
Øe1

Øa1
80 -0,5
50

60
11
32

3
4
Ø9 68 f1 DR M10x22
32 32 100 4
50 50 120
131,5

Y Z
AD
60° M10x17 X
5
8

Ø115
AG

33

Flange a1 b1 to2 c1 e1 f1 s1
A160 160 110 j6 10 130 3.0 9
A200 200 130 j6 12 165 3.5 11

BF38 Weight
Motor k kB AC AD AG LL HH O BF38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 23
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 23
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 28
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 32
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 32
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 38
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 41
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 51

➃ DIN 332 ➄ Feather key / keyway DIN 6885

Siemens D 87.1 · 2011 4/111

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BA/BAZ38 (2-stage), housing-flange-mounted design (C-type)

BA012
BAZ012

kB
k
80 -0,5 169 HH

60° M10x17 LL 65 65
32 32 Ø9
11 11 3 3

Z
80 -0,5

32

ØAC
50

37

Ø95 j6

Ø95 j6
Ø115 Y

Ø132

Ø132
80 -0,5
50

4
11
32

Ø9 68
32 32 100
50 50 120
131,5
5 q1 70
t 54 54
Y Z
M
u JS9

AD
60° M10x17 1

Ød7
Ød H7
l9
Ø115
AG

118
140
Ød h6 105
O

4 Rmax 2.5

d l9 M t u d7 q1
30 *) 31 M10 33.3 8 50 72
35 40 M12 38.3 10 50 72
40 48 M16 43.3 12 55 73
)
* Preferred series

BA.38 Weight
Motor k kB AC AD AG LL HH O BA.38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 26
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 30
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 30
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 36
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 39
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 49

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

4/112 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAD38 (2-stage), shaft-mounted design with torque arm

BAD012
kB
k 87
80 -0,5 169 HH 65 65
LL 120
60° 100
32 32 Ø9
11
11
80 -0,5

ØAC
37

Ø95 j6
Y

Ø132
80 -0,5
160

Ø16 H9
4

Ø50
3
68

32
Y Z
38
AD
60° M10x17 5 87,5
t q1 70
u JS9

54 54
Ø115
AG

M
1

Ød7
O

Ød H7
l9
118
140
105
Ød h6
8x30° 9x3
0 °
30° 45°
Fig. 1 4 9 4 4
9 7 Fig.2 Rmax 2.5
6 7
6
1
1
8
8
3 10
3 5
2 2 5
d l9 M t u d7 q1
30 *) 31 M10 33.3 8 50 72
35 40 M12 38.3 10 50 72
40 48 M16 43.3 12 55 73
*) Preferred series

BAD38 Weight
Motor k kB AC AD AG LL HH O BAD38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 27
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 31
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 32
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 38
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 41
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 51
➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/113

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAF38 (2-stage), flange mounted design

BAF012

kB
k
80 -0,5 169 HH
LL
45° 65 97
32 32 Ø9 c1
11 Øs1 3
11
80 -0,5

Z
32

ØAC

Øb1 to2
50

37

Ø95 j6
Y

Ø132
Øe1

Øa1
80 -0,5
50

11
32

4 68
Ø9 100 f1
32 32 120
50 50
131,5 5 q1 70
t 54 54
Y Z
M
u JS9
AD
60° M10x17 1

Ød7
Ød H7
l9
Ø115
AG

118
140
105
Ød h6
O

4 Rmax 2.5

Flange a1 b1 to2 c1 e1 f1 s1 d l9 M t u d7 q1
A160 160 110 j6 10 130 3.0 9 30 *) 31 M10 33.3 8 50 72
35 40 M12 38.3 10 50 72
40 48 M16 43.3 12 55 73
A200 200 130 j6 12 165 3.5 11 30 *) 31 M10 33.3 8 50 72
35 40 M12 38.3 10 50 72
40 48 M16 43.3 12 55 73

*) Preferred series

BAF38 Weight
Motor k kB AC AD AG LL HH O BAF38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 27
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 31
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 31
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 37
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 40
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 50

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912 ➅ For note, see page 4/217

4/114 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAS/BAZS38 (2-stage), shaft-mounted design with housing flange (C-type) and shrink disk
BAS012
BAZS012

kB
k
80 -0,5 169 HH

60° M10x17 LL 65 65
32 32 Ø9
11 11 3

Z
80 -0,5

32

ØAC
50

37

Ø95 j6
Ø115

Ø132
Øg7
80 -0,5
50

4
11
32

Ø9 68
32 32 100
50 50 120
131,5 q1 70
m4 20
Z
AD

Ød H7

Ød H7
l
m6 25
AG

Ød h6

Ød h6
Rmax 1.0

d l g7 m4 m6 q1
30 *) 166 77 27 32 104
35 168 85 27 32 106

*) Preferred series

BA.S38 Weight
Motor k kB AC AD AG LL HH O BA.S38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 21
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 26
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 30
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 31
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 37
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 40
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 50

Siemens D 87.1 · 2011 4/115

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BADS38 (2-stage), shaft-mounted design with torque arm

BADS012
kB
k 87
80 -0,5 169 HH 65 65
LL 120
60° 100
32 32 Ø9
11
11

Z
80 -0,5 80 -0,5

ØAC
37

Øg7
160

Ø16 H9
Ø50
4 68

32
38
Z 87,5
AD q1 70
m4 20

Ød H7

Ød H7
l
O m6 25
Ød h6

Ød h6
Rmax 1.0

8x30° 9x3
0°
30° 45°
Fig. 1 4 9 4
9 7 Fig.2
6 7
6
1
1
8
8
3 10
3 5
2 2 5
d l g7 m4 m6 q1
30 *) 166 77 27 32 104
35 168 85 27 32 106
*) Preferred series

BADS38 Weight
Motor k kB AC AD AG LL HH O BADS38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 23
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 23
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 28
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 32
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 32
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 38
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 41
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 51

4/116 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox BAFS38 (2-stage), flange mounted design and shrink disk

BAFS012

kB
k
80 -0,5 169 HH
LL
45° 65 97
32 32 Ø9 c1
11 Øs1
11
80 -0,5

Z
32

ØAC

Øb1 to2
50

37

Øg7
Øe1

Øa1
80 -0,5
50

11
32

68
4
Ø9 100 f1
32 32 120
50 50 q1 70
131,5 m4 20
Z
AD

Ø50
Ød H7

Ød H7
l
m6 25
AG

Ød h6
O

Ød h6
Rmax 1.0

Flange a1 b1 to2 c1 e1 f1 s1 d l g7 m4 m6 q1
A160 160 110 j6 10 130 3.0 9 30 *) 166 77 27 32 104
35 168 85 27 32 106
A200 200 130 j6 12 165 3.5 11 30 *) 166 77 27 32 104
35 168 85 27 32 106

*) Preferred series

BAFS38 Weight
Motor k kB AC AD AG LL HH O BAFS38
LA71 482.0 537.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA71Z 501.0 556.0 139.0 146 90 90 89.0 M20x1.5/M25x1.5 22
LA80 519.0 582.5 156.5 155 90 90 88.5 M20x1.5/M25x1.5 27
LA80Z 541.5 605.0 156.5 155 90 90 161.5 M20x1.5/M25x1.5 31
LA90S/L 550.0 621.0 174.0 163 90 90 88.5 M20x1.5/M25x1.5 32
LA90ZL 595.0 666.0 174.0 163 90 90 212.5 M20x1.5/M25x1.5 38
LA100L 596.0 677.0 195.0 168 120 120 129.0 2xM32x1.5 41
LA100ZL 666.0 747.0 195.0 168 120 120 261.0 2xM32x1.5 51

➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/117

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K38 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
63 -0,5 164 HH l 57 57 l
16 LL l3 l4
31
67
47

Ød to1

Ød to1
X
Z B A

ØAC
100 -0,5

9,5
68
33

DR
4
28 Ø11 0 Ø11
16

4 35
110
32 82
100 i
Z
AD 120
X
125 u 5

t
62,5
AG

d to1 l l3 l4 t u i q DR
25 *) k6 50 40 5 28 8 60 110 M10x22
35 k6 70 56 5 38 10 80 130 M12x28

*) Preferred series

K38 Weight
Motor k kB AC AD AG LL HH O K38
LA71 485.5 540.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA71Z 504.5 559.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA80 522.5 586.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 25
LA80Z 545.0 608.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 29
LA90S/L 553.5 624.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 29
LA90ZL 598.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 35
LA100L 599.5 680.5 195.0 168 120 120 154.5 2xM32x1.5 38
LA100ZL 669.5 750.5 195.0 168 120 120 286.5 2xM32x1.5 48
LA112M 629.0 710.0 219.0 181 120 120 160.0 2xM32x1.5 49
LA112ZM 657.0 738.0 219.0 181 120 120 264.0 2xM32x1.5 56

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/118 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF38 (3-stage), flange-mounted design (A-type)

KF012

kB
k 57 134
70 164 HH 50
Ø9 LL 10 3,5 6
4°
5

40 5
67

Ø25 k6
Ø110 j6
Ø130 X

Ø160
Z

ØAC
50
9,5
100 -0,5

4
DR M10x22
35 M10x17 0 60 4
32 32 100
X
117
Z 8 5
AD
125

28
62,5
AG

KF38 Weight
Motor k kB AC AD AG LL HH O KF38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 21
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 21
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 26
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 30
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 31
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 37
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 40
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 50
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 50
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 57

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/119

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA38 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
63 -0,5 164 HH
16 LL 57 57
31
67
47

Z B A

ØAC
100 -0,5

9,5
68
33

4 28 Ø11 Ø11
16
35 32 82
110 100
Z
AD 120
125

5
63 60
33,3 44 44

8 JS9
62,5

Ø30 H7
Ø45
AG

M10
1 31
O 102
120
90

Ø30h6

4 Rmax 2.5

KA38 Weight
Motor k kB AC AD AG LL HH O KA38
LA71 485.5 540.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 18
LA71Z 504.5 559.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 18
LA80 522.5 586.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 23
LA80Z 545.0 608.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 27
LA90S/L 553.5 624.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 28
LA90ZL 598.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 34
LA100L 599.5 680.5 195.0 168 120 120 154.5 2xM32x1.5 37
LA100ZL 669.5 750.5 195.0 168 120 120 286.5 2xM32x1.5 47
LA112M 629.0 710.0 219.0 181 120 120 160.0 2xM32x1.5 48
LA112ZM 657.0 738.0 219.0 181 120 120 264.0 2xM32x1.5 55

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

4/120 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD38 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
70 164 HH 57 57
M8x14 LL 3 3
60°
67

Ø100

Ø80 j6
Ø120

Ø120
Ø80 j6
Z B A

ØAC
9,5
100

23,5
140

0 4
13

Ø12 H9
1
R2

24
149 28
Z
AD 100
125

5
63 60
8 JS9 33,3 44 44
62,5

Ø30 H7
Ø45
AG

M10
1 31
O 102
120
90
Ø30 h6

4 Rmax 2.5

KAD38 Weight
Motor k kB AC AD AG LL HH O KAD38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 24
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 28
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 28
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 34
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 38
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 48
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 48
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 55

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/121

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF38 (3-stage), flange-mounted design

KAF012

kB
k
70 164 HH 57 84
Ø9 LL 10 3,5
45°
67

Ø110 j6
Ø130

Ø160
Z B A

ØAC
9,5
100 -0,5

4 35 M10x17 0 60
6

32 32 100
117
Z
AD
125

5
63 60
33,3 44 44
8 JS9
62,5

Ø30 H7
Ø45
AG

M10
1 31
102
120
90
O
Ø30 h6

4 Rmax 2.5

KAF38 Weight
Motor k kB AC AD AG LL HH O KAF38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 25
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 29
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 29
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 35
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 39
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 49
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 49
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 56

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912 ➅ For note, see page 4/217

4/122 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ38 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
70 164 HH 57 57
M8x14 LL 3 3
60°
67

Ø100

Ø80 j6
Ø120

Ø120
Ø80 j6
Z B A

ØAC
9,5
100 -0,5

35
32 32
M10x17 o2 60
100 4
117
Z
AD
125

5
63 60
33,3 44 44

8 JS9
62,5

Ø30H7
Ø45
AG

M10
1 31
O 102
120
90
Ø30 h6

4 Rmax 2.5

KAZ38 Weight
Motor k kB AC AD AG LL HH O KAZ38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 18
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 18
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 23
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 27
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 28
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 34
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 37
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 47
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 48
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 55

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/123

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS38 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
63 -0,5 164 HH
16 LL 57 57
31
67
47

B A

Ø77
Z

ØAC
100 -0,5

9,5
68
33

4 28 Ø11 0
16
Ø11
35 32 82
110 100
Z
AD 120
125
94 60
22 20
62,5

Ø30 H7

Ø30 H7
AG

146
O
27 25
Ø30 h6

Ø30 h6
Rmax 1.0

KAS38 Weight
Motor k kB AC AD AG LL HH O KAS38
LA71 485.5 540.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA71Z 504.5 559.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA80 522.5 586.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 24
LA80Z 545.0 608.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 28
LA90S/L 553.5 624.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 28
LA90ZL 598.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 34
LA100L 599.5 680.5 195.0 168 120 120 154.5 2xM32x1.5 38
LA100ZL 669.5 750.5 195.0 168 120 120 286.5 2xM32x1.5 48
LA112M 629.0 710.0 219.0 181 120 120 160.0 2xM32x1.5 48
LA112ZM 657.0 738.0 219.0 181 120 120 264.0 2xM32x1.5 55

4/124 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS38 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
70 164 HH 57 57
M8x14 LL 3 3
60°
67

Ø100

Ø80 j6
Ø80 j6
Ø120

Ø120
B A

Ø77
Z

ØAC
9,5
100

23,5
140

0
4
13

Ø12 H9
1
R2

24
149 28
Z
AD 100
125
94 60
22 20
62,5

Ø30 H7

Ø30 H7
AG

146
O
27 25
Ø30 h6

Ø30 h6
Rmax 1.0

KADS38 Weight
Motor k kB AC AD AG LL HH O KADS38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 24
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 28
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 29
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 35
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 38
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 48
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 49
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 56

Siemens D 87.1 · 2011 4/125

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS38 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
70 164 HH 57 84
Ø9 LL 10 3,5
45°
67

Ø130

Ø110 j6
Ø160
B A

Ø77
Z

ØAC
9,5
100 -0,5

4 35 M10x17 0 60
6

32 32 100
117
Z
AD
125

94 60
22 20
62,5

Ø30 H7

Ø30 H7
AG

146
27 25
Ø30 h6

Ø30 h6
O
Rmax 1.0

KAFS38 Weight
Motor k kB AC AD AG LL HH O KAFS38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 20
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 25
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 29
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 30
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 36
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 39
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 49
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 49
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 56

➅ For note, see page 4/217

4/126 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS38 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
70 164 HH 57 57
M8x14 LL 3 3
60°
67

Ø100

Ø120

Ø120
Ø80 j6
B A

Ø80 j6
Ø77
Z

ØAC
9,5
100 -0,5

35 M10x17 0 60 4
32 32 100
117
Z
AD
125
94 60
22 20
62,5

Ø30 H7

Ø30 H7
AG

146
O
27 25
Ø30 h6

Ø30 h6
Rmax 1.0

KAZS38 Weight
Motor k kB AC AD AG LL HH O KAZS38
LA71 492.5 547.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA71Z 511.5 566.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 19
LA80 529.5 593.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 24
LA80Z 552.0 615.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 28
LA90S/L 560.5 631.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 28
LA90ZL 605.5 676.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 34
LA100L 606.5 687.5 195.0 168 120 120 154.5 2xM32x1.5 37
LA100ZL 676.5 757.5 195.0 168 120 120 286.5 2xM32x1.5 47
LA112M 636.0 717.0 219.0 181 120 120 160.0 2xM32x1.5 48
LA112ZM 664.0 745.0 219.0 181 120 120 264.0 2xM32x1.5 55

Siemens D 87.1 · 2011 4/127

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K48 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
71 -0,5 186 HH l 71 71 l
18 LL l3 l4
36
75
55

Ød to1

Ød to1
X
Z B A

ØAC
112 -0,5

11
75
40

DR
4
35 Ø11 3 Ø11
18

4 39
130
40 98
120 i
Z
AD 145
X
125 u 5

t
62,5
AG

d to1 l l3 l4 t u i q DR
30 *) k6 60 50 3.5 33 8 75 135 M10x22
40 k6 80 70 5.0 43 12 95 155 M16x36

*) Preferred series

K48 Weight
Motor k kB AC AD AG LL HH O K48
LA71 515.5 570.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA71Z 534.5 589.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA80 552.5 616.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 29
LA80Z 575.0 638.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 33
LA90S/L 583.5 654.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 34
LA90ZL 628.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 40
LA100L 629.5 710.5 195.0 168 120 120 154.5 2xM32x1.5 43
LA100ZL 699.5 780.5 195.0 168 120 120 286.5 2xM32x1.5 53
LA112M 659.0 740.0 219.0 181 120 120 160.0 2xM32x1.5 53
LA112ZM 687.0 768.0 219.0 181 120 120 264.0 2xM32x1.5 70

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/128 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF48 (3-stage), flange-mounted design (A-type)

KF012

kB
k 71 160
77,5 186 HH 60
Ø11 LL 12 3,5 6
4°
5

50 3,5
75

Ø30 k6
Ø130 j6
Ø165 X

Ø200
Z

ØAC
60
11
112 -0,5

4
DR M10x22
40 M10x17 3 70 4
30 30 110
X
140
Z 8 5
AD
125

33
62,5
AG

KF48 Weight
Motor k kB AC AD AG LL HH O KF48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 26
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 26
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 31
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 31
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 36
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 36
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 45
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 45
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 56
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 56

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/129

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA48 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
71 -0,5 186 HH
18 LL 71 71
36
75
55

Z B A

ØAC
112 -0,5

11
75
40

4 35 Ø11 Ø11
18
39 40 98
130 120
Z
AD 145
125

5
78 75
t 58 58

u JS9
62,5

Ød H7
Ø55
AG

M
1 l9
O 128
150
115

Ød h6

4 Rmax 2.5

d l9 M t u
35 *) 40 M12 38.3 10
40 48 M16 43.3 12

*) Preferred series

KA48 Weight
Motor k kB AC AD AG LL HH O KA48
LA71 515.5 570.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA71Z 534.5 589.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA80 552.5 616.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 28
LA80Z 575.0 638.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 32
LA90S/L 583.5 654.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 32
LA90ZL 628.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 38
LA100L 629.5 710.5 195.0 168 120 120 154.5 2xM32x1.5 41
LA100ZL 699.5 780.5 195.0 168 120 120 286.5 2xM32x1.5 51
LA112M 659.0 740.0 219.0 181 120 120 160.0 2xM32x1.5 52
LA112ZM 687.0 768.0 219.0 181 120 120 264.0 2xM32x1.5 59

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

4/130 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD48 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
77,5 186 HH 71 71
M10x17 LL 3 3
60°
75

Ø115

Ø95 j6
Ø95 j6
Ø132

Ø132
Z B A

ØAC
11
112

30
160

3
4
13

Ø18 H9
0
R3

36
170 42
Z
AD 110
125

5
78 75
t 58 58
u JS9
62,5

Ød H7
Ø55
AG

M
1 l9
O 128
150
115
Ød h6

4 Rmax 2.5

d l9 M t u
35 *) 40 M12 38.3 10
40 48 M16 43.3 12

*) Preferred series

KAD48 Weight
Motor k kB AC AD AG LL HH O KAD48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 29
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 33
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 33
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 39
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 42
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 52
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 53
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 60

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/131

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF48 (3-stage), flange-mounted design

KAF012

kB
k
77,5 186 HH 71 100
Ø11 LL 12 3,5
45°
75

Ø165

Ø200
Ø130 j6
Z B A

ØAC
11
112 -0,5

4 40 M10x17 3 70
6

30 30 110
140
Z
AD
125

5
78 75
t 58 58
u JS9
62,5

Ød H7
Ø55
AG

M
1 l9
128
150
115
O
Ød h6

4 Rmax 2.5

d l9 M t u
35 *) 40 M12 38.3 10
40 48 M16 43.3 12

*) Preferred series

KAF48 Weight
Motor k kB AC AD AG LL HH O KAF48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 25
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 25
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 30
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 34
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 34
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 40
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 44
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 54
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 54
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 61

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912 ➅ For note, see page 4/217

4/132 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ48 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
77,5 186 HH 71 71
M10x17 LL 3 3
60°
75

Ø115

Ø132

Ø132
Ø95 j6
Ø95 j6
Z B A

ØAC
11
112 -0,5

30
40
30
M10x17 3 70
110 4
140
Z
AD
125

5
78 75
t 58 58

u JS9
62,5

Ød H7
Ø55
AG

M
1 l9
O 128
150
115
Ød h6

4 Rmax 2.5

d l9 M t u
35 *) 40 M12 38.3 10
40 48 M16 43.3 12

*) Preferred series

KAZ48 Weight
Motor k kB AC AD AG LL HH O KAZ48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 22
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 22
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 27
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 31
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 32
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 38
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 41
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 51
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 52
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 59

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/133

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS48 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
71 -0,5 186 HH
18 LL 71 71
36
75
55

B A

Øg7
Z

ØAC
112 -0,5

11
75
40

4 35 Ø11 3
18
Ø11
39 40 98
130 120
Z
AD 145
125
q1 q
m4 m5
62,5

Ød1 H7
Ød H7
AG

l
O
m6 m7
Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
35 *) 35 177 32 20 37 25 109 75 93
40 40 177 25 20 30 25 109 75 93

*) Preferred series

KAS48 Weight
Motor k kB AC AD AG LL HH O KAS48
LA71 515.5 570.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA71Z 534.5 589.5 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA80 552.5 616.0 156.5 155 90 90 114.0 M20x1.5/M25x1.5 28
LA80Z 575.0 638.5 156.5 155 90 90 187.0 M20x1.5/M25x1.5 32
LA90S/L 583.5 654.5 174.0 163 90 90 114.0 M20x1.5/M25x1.5 33
LA90ZL 628.5 669.5 174.0 163 90 90 238.0 M20x1.5/M25x1.5 39
LA100L 629.5 710.5 195.0 168 120 120 154.5 2xM32x1.5 42
LA100ZL 699.5 780.5 195.0 168 120 120 286.5 2xM32x1.5 52
LA112M 659.0 740.0 219.0 181 120 120 160.0 2xM32x1.5 53
LA112ZM 687.0 768.0 219.0 181 120 120 264.0 2xM32x1.5 60

4/134 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS48 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
77,5 186 HH 71 71
M10x17 LL 3 3
60°
75

Ø115

Ø95 j6
Ø132

Ø132
Ø95 j6
B A

Øg7
Z

ØAC
11
112

30
160

3
4
13

Ø18 H9
0
R3

36
170 42
Z
AD 110
125
q1 q
m4 m5
62,5

Ød H7

Ød1 H7
AG

l
O
m6 m7
Ød h6

Ød1 h6
R max 1.0

d d1 l m4 m5 m6 m7 q1 q g7
35 *) 35 177 32 20 37 25 109 75 93
40 40 177 25 20 30 25 109 75 93

*) Preferred series

KADS48 Weight
Motor k kB AC AD AG LL HH O KADS48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 24
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 29
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 33
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 34
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 40
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 43
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 53
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 54
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 61

Siemens D 87.1 · 2011 4/135

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS48 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
77,5 186 HH 71 100
Ø11 LL 12 3,5
45°
71

Ø165

Ø130 j6
Ø200
B A

Øg7
Z

ØAC
11
112 -0,5

4 40 M10x17 3 70
6

30 30 110
140
Z
AD
125

q1 q
m4 m5
62,5

Ød H7

Ød1 H7
AG

l
m6 m7
Ød h6

Ød1 h6
O
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
35 *) 35 177 32 20 37 25 109 75 93
40 40 177 25 20 30 25 109 75 93

*) Preferred series

KAFS48 Weight
Motor k kB AC AD AG LL HH O KAFS48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 26
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 26
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 31
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 35
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 35
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 41
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 44
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 54
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 55
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 65

➅ For note, see page 4/217

4/136 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS48 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
77,5 186 HH 71 71
M10x17 LL 3 3
60°
75

Ø115

Ø132

Ø132
Ø95 j6
Ø95 j6
B A

Øg7
Z

ØAC
11
112 -0,5

30
40
30
M10x17 3 70
110 4
140
Z
AD
125
q1 q
m4 m5
62,5

Ød H7

Ød1 H7
AG

l
O
Ød h6 m6 m7

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
35 *) 35 177 32 20 37 25 109 75 93
40 40 177 25 20 30 25 109 75 93

*) Preferred series

KAZS48 Weight
Motor k kB AC AD AG LL HH O KAZS48
LA71 522.0 577.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA71Z 541.0 596.0 139.0 146 90 90 114.5 M20x1.5/M25x1.5 23
LA80 559.0 622.5 156.5 155 90 90 114.0 M20x1.5/M25x1.5 28
LA80Z 581.5 645.0 156.5 155 90 90 187.0 M20x1.5/M25x1.5 32
LA90S/L 590.0 661.0 174.0 163 90 90 114.0 M20x1.5/M25x1.5 33
LA90ZL 635.0 706.0 174.0 163 90 90 238.0 M20x1.5/M25x1.5 39
LA100L 636.0 717.0 195.0 168 120 120 154.5 2xM32x1.5 42
LA100ZL 706.0 787.0 195.0 168 120 120 286.5 2xM32x1.5 52
LA112M 665.5 746.5 219.0 181 120 120 160.0 2xM32x1.5 52
LA112ZM 693.5 774.5 219.0 181 120 120 264.0 2xM32x1.5 59

Siemens D 87.1 · 2011 4/137

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K68 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
90 -o,5 220 HH l 86 86 l
22 LL l3 l4
48
91
65

Ød to1

Ød to1
X
Z B A

ØAC
140 -o,5

6,5
95
50

DR
4
30 Ø13,5 13 Ø13,5
22

4 50
120
50 118,5
140 i
Z
AD 170
X
160 u 5

t
80
AG

d to1 l l3 l4 t u i q DR
35 k6 70 56 5 38.0 10 90 160 M12x28
40 *) k6 80 70 5 43.0 12 100 170 M16x36
50 k6 100 80 10 53.5 14 120 190 M16x36

*) Preferred series

K68 Weight
Motor k kB AC AD AG LL HH O K68
LA71 563.0 618.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 44
LA71Z 582.0 637.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 44
LA80 600.0 663.5 156.5 155 90 90 108.5 M20x1.5/M25x1.5 49
LA80Z 622.5 686.0 156.5 155 90 90 181.5 M20x1.5/M25x1.5 53
LA90S/L 631.0 702.0 174.0 163 90 90 108.5 M20x1.5/M25x1.5 53
LA90ZL 676.0 747.0 174.0 163 90 90 232.5 M20x1.5/M25x1.5 59
LA100L 677.0 758.0 195.0 168 120 120 149.0 2xM32x1.5 62
LA100ZL 747.0 828.0 195.0 168 120 120 281.0 2xM32x1.5 72
LA112M 706.0 787.0 219.0 181 120 120 154.0 2xM32x1.5 74
LA112ZM 734.0 815.0 219.0 181 120 120 258.0 2xM32x1.5 81
LA132S/M 768.0 870.0 259.0 195 140 140 196.5 2xM32x1.5 84
LA132ZM 814.0 916.0 259.0 195 140 140 304.5 2xM32x1.5 105

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/138 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF68 (3-stage), flange-mounted design (A-type)

KF012

kB
k 86 193
88,5 220 HH 80
Ø13,5 LL 15 4 6
45°

70 5
91

Ø40 k6
Ø180 j6
Ø215 X

Ø250
Z

ØAC
80
6,5
140 -0,5

4
DR M16x36
42 M12x21 13 88 4
50 50 140
X
152
Z 12 5
AD
160

43
80
AG

KF68 Weight
Motor k kB AC AD AG LL HH O KF68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 49
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 49
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 54
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 58
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 58
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 64
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 67
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 77
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 79
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 86
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 89
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 110

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/139

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA68 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
90 -0,5 220 HH
22 LL 86 86
48
91
65

Z B A

ØAC
140 -0,5

6,5
95
50

4 30 Ø13,5 Ø13,5
22
50 50 118,5
120 140
Z
AD 170
160

5
93 90
t 69 69

u JS9
80

Ød H7
Ø65
AG

M
1 l9
O 150
180
135

Ød h6

4 Rmax 2.5

d l9 M t u
40 *) 48 M16 43.3 12
45 47 M16 48.8 14

*) Preferred series

KA68 Weight
Motor k kB AC AD AG LL HH O KA68
LA71 563.0 618.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 40
LA71Z 582.0 637.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 40
LA80 600.0 663.5 156.5 155 90 90 108.5 M20x1.5/M25x1.5 45
LA80Z 622.5 686.0 156.5 155 90 90 181.5 M20x1.5/M25x1.5 49
LA90S/L 631.0 702.0 174.0 163 90 90 108.5 M20x1.5/M25x1.5 50
LA90ZL 676.0 747.0 174.0 163 90 90 232.5 M20x1.5/M25x1.5 56
LA100L 677.0 758.0 195.0 168 120 120 149.0 2xM32x1.5 59
LA100ZL 747.0 828.0 195.0 168 120 120 281.0 2xM32x1.5 69
LA112M 706.0 787.0 219.0 181 120 120 154.0 2xM32x1.5 70
LA112ZM 734.0 815.0 219.0 181 120 120 258.0 2xM32x1.5 77
LA132S/M 768.0 870.0 259.0 195 140 140 196.5 2xM32x1.5 80
LA132ZM 814.0 916.0 259.0 195 140 140 304.5 2xM32x1.5 102

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

4/140 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD68 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
88,5 220 HH 86 86
M12x21 LL 3,5 3,5
60°
91

Ø130

Ø110 j6

Ø110 j6
Ø150

Ø150
Z B A

ØAC
6,5
140

34
200

13
4
15

Ø18 H9
2
R3

36
182 42
Z
AD 140
160

5
93 90
t 69 69
u JS9
80

Ød H7
Ø65
AG

M
1 l9
O 150
180
135
Ødh6

4 Rmax 2.5

d l9 M t u
40 *) 48 M16 43.3 12
45 47 M16 48.8 14

*) Preferred series

KAD68 Weight
Motor k kB AC AD AG LL HH O KAD68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 47
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 51
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 52
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 58
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 61
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 71
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 72
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 79
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 82
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 104

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/141

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF68 (3-stage), flange-mounted design

KAF012

kB
k
88,5 220 HH 86 113
Ø13,5 LL 15 4
45°
91

Ø180 j6
Ø215

Ø250
Z B A

ØAC
6,5
140 -0,5

4 42 M12x21 13 88
6

50 50 140
152
Z
AD
160

5
93 90
t 69 69
u JS9
80

Ød H7
Ø65
AG

M
1 l9
150
180
135
O
Ød h6

4 Rmax 2.5

d l9 M t u
40 *) 48 M16 43.3 12
45 47 M16 48.8 14

*) Preferred series

KAF68 Weight
Motor k kB AC AD AG LL HH O KAF68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 45
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 45
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 50
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 54
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 55
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 61
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 64
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 74
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 75
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 82
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 85
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 107

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912 ➅ For note, see page 4/217

4/142 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ68 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
88,5 220 HH 86 86
M12x21 LL 3,5 3,5
60°
91

Ø130

Ø110 j6
Ø150

Ø150
Ø110 j6
Z B A

ØAC
6,5
140 -0,5

50
42
50
M12x21 13 88
140 4
152
Z
AD
160

5
93 90
t 69 69

u JS9

Ød H7
80

Ø65
AG

M
1 l9
O 150
180
135
Ød h6

4 Rmax 2.5

d l9 M t u
40 *) 48 M16 43.3 12
45 47 M16 48.8 14
*) Preferred series

KAZ68 Weight
Motor k kB AC AD AG LL HH O KAZ68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 41
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 41
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 46
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 50
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 50
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 56
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 59
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 69
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 71
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 78
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 81
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 102

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN 6912

Siemens D 87.1 · 2011 4/143

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS68 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
90 -0,5 220 HH
22 LL 86 86
48
91
65

B A

Øg7
Z

ØAC
140 -0,5

6,5
95
50

4 50
30
50
Ø13,5 13 22 Ø13,5
119
120 140
Z
AD 170
160
q1 q
m4 m5
80

Ød H7

Ød1 H7
AG

l
O
m6 m7

Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
40 *) 40 209 35 20 40 25 126 90 112
50 50 209 27 20 32 25 126 90 112

*) Preferred series

KAS68 Weight
Motor k kB AC AD AG LL HH O KAS68
LA71 563.0 618.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA71Z 582.0 637.0 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA80 600.0 663.5 156.5 155 90 90 108.5 M20x1.5/M25x1.5 47
LA80Z 622.5 686.0 156.5 155 90 90 181.5 M20x1.5/M25x1.5 51
LA90S/L 631.0 702.0 174.0 163 90 90 108.5 M20x1.5/M25x1.5 51
LA90ZL 676.0 747.0 174.0 163 90 90 232.5 M20x1.5/M25x1.5 57
LA100L 677.0 758.0 195.0 168 120 120 149.0 2xM32x1.5 60
LA100ZL 747.0 828.0 195.0 168 120 120 281.0 2xM32x1.5 70
LA112M 706.0 787.0 219.0 181 120 120 154.0 2xM32x1.5 72
LA112ZM 734.0 815.0 219.0 181 120 120 258.0 2xM32x1.5 79
LA132S/M 768.0 870.0 259.0 195 140 140 196.5 2xM32x1.5 82
LA132ZM 814.0 916.0 259.0 195 140 140 304.5 2xM32x1.5 103

4/144 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS68 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
88,5 220 HH 86 86
M12x21 LL 3,5 3,5
60°
91

Ø130

Ø110 j6

Ø110 j6
Ø150

Ø150
B A

Øg7
Z

ØAC
6,5
140

34
200

13
4
15

Ø18 H9
2
R3

36
182 42
Z
AD 140
160
q1 q
m4 m5
80

Ød1 H7
Ød H7
AG

l
O
m6 m7
Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
40 *) 40 209 35 20 40 25 126 90 112
50 50 209 27 20 32 25 126 90 112

*) Preferred series

KADS68 Weight
Motor k kB AC AD AG LL HH O KADS68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 44
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 44
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 49
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 54
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 53
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 59
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 62
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 72
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 74
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 81
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 84
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 105

Siemens D 87.1 · 2011 4/145

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS68 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
88,5 220 HH 86 113
Ø13,5 LL 15 4
45°
91

Ø180 j6
Ø215

Ø250
B A

Øg7
Z

ØAC
6,5
140 -0,5

4 42 M12x21 13 88
6

50 50 140
152
Z
AD
160

q1 q
m4 m5
80

Ød1 H7
Ød H7
AG

l
m6 m7
Ød h6

Ød1 h6
O
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
40 *) 40 209 35 20 40 25 126 90 112
50 50 209 27 20 32 25 126 90 112

*) Preferred series

KAFS68 Weight
Motor k kB AC AD AG LL HH O KAFS68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 47
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 47
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 52
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 56
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 56
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 62
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 65
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 75
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 77
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 84
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 87
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 108

➅ For note, see page 4/217

4/146 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS68 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
88,5 220 HH 86 86
M12x21 LL 3,5 3,5
60°
91

Ø130

Ø110 j6
Ø150

Ø150
Ø110 j6
B A

Øg7
Z

ØAC
6,5
140 -0,5

50
42
50
M12x21 13 88
140 4
152
Z
AD
160
q1 q
m4 m5
80

Ød H7

Ød1 H7
AG

l
O
Ød h6 m6 m7

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
40 *) 40 209 35 20 40 25 126 90 112
50 50 209 27 20 32 25 126 90 112

*) Preferred series

KAZS68 Weight
Motor k kB AC AD AG LL HH O KAZS68
LA71 561.5 616.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA71Z 580.5 635.5 139.0 146 90 90 109.0 M20x1.5/M25x1.5 42
LA80 598.5 662.0 156.5 155 90 90 108.5 M20x1.5/M25x1.5 47
LA80Z 621.0 684.5 156.5 155 90 90 181.5 M20x1.5/M25x1.5 51
LA90S/L 629.5 700.5 174.0 163 90 90 108.5 M20x1.5/M25x1.5 52
LA90ZL 674.5 745.5 174.0 163 90 90 232.5 M20x1.5/M25x1.5 58
LA100L 675.5 756.5 195.0 168 120 120 149.0 2xM32x1.5 61
LA100ZL 745.5 826.5 195.0 168 120 120 281.0 2xM32x1.5 71
LA112M 704.5 785.5 219.0 181 120 120 154.0 2xM32x1.5 72
LA112ZM 732.5 813.5 219.0 181 120 120 258.0 2xM32x1.5 79
LA132S/M 766.5 868.5 259.0 195 140 140 196.5 2xM32x1.5 82
LA132ZM 812.5 914.5 259.0 195 140 140 304.5 2xM32x1.5 103

Siemens D 87.1 · 2011 4/147

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K88 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
112 -0,5 262 HH l 100 100 l
25 LL l3 l4
65
115
75

Ød to1

Ød to1
X
Z B A

ØAC
180 -0,5

20
125
55

DR
4
40 Ø18 13 Ø18
4
25

55 55 138
150 165 i
Z
AD 200
X
200 u 5

t
100
AG

d to1 l l3 l4 t u i q DR
50 *) k6 100 80 10 53.5 14 122.5 205 M16x36
70 m6 140 110 15 74.5 20 162.5 245 M20x42

*) Preferred series

K88 Weight
Motor k kB AC AD AG LL HH O K88
LA71 621.0 676.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 73
LA71Z 640.0 695.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 73
LA80 658.0 721.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 78
LA80Z 680.5 744.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 82
LA90S/L 689.0 760.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 83
LA90ZL 734.0 805.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 89
LA100L 735.0 816.0 195.0 168 120 120 143.0 2xM32x1.5 92
LA100ZL 805.0 886.0 195.0 168 120 120 275.0 2xM32x1.5 102
LA112M 762.0 843.0 219.0 181 120 120 146.0 2xM32x1.5 104
LA112ZM 790.0 871.0 219.0 181 120 120 250.0 2xM32x1.5 111
LA132S/M 822.0 924.0 259.0 195 140 140 186.5 2xM32x1.5 117
LA132ZM 868.0 970.0 259.0 195 140 140 294.5 2xM32x1.5 138
LA160M/L 924.5 1 043.0 313.5 227 165 165 212.0 2xM40x1.5 149
LA160ZL 972.5 1 091.0 313.5 227 165 165 365.0 2xM40x1.5 188

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/148 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF88 (3-stage), flange-mounted design (A-type)

KF012

kB
k 100 242
110 262 HH 100
Ø13,5 LL 16 4 6
45°
115

80 10
Ø265 X

Ø300
Ø230 j6
Ø50 k6
Z

ØAC
100
20
180 -0,5

4
DR M16x36
48 M16x26 13 115 4
55 55 170
X
170
Z 14 5
AD
200

53,5
100
AG

KF88 Weight
Motor k kB AC AD AG LL HH O KF88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 80
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 80
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 85
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 89
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 89
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 95
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 99
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 109
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 110
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 117
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 123
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 144
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 156
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 195

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/149

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA88 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
112 -0,5 262 HH
25 LL 100 100
65
115
75

Z B A

ØAC
180 -0,5

20
125
55

4 40 Ø18 Ø18
25
55 55 138
150 165
Z
AD 200
200

5
108 105
t 78 78

u JS9
100

Ød H7
Ø80
AG

M
1 l9
O 180
210
165

Ød h6

4 Rmax 2.5

d l9 M t u
50 *) 44.5 M16 53.8 14
60 54.0 M20 64.4 18

*) Preferred series

KA88 Weight
Motor k kB AC AD AG LL HH O KA88
LA71 621.0 676.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 65
LA71Z 640.0 695.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 65
LA80 658.0 721.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 70
LA80Z 680.5 744.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 74
LA90S/L 689.0 760.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 75
LA90ZL 734.0 805.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 81
LA100L 735.0 816.0 195.0 168 120 120 143.0 2xM32x1.5 84
LA100ZL 805.0 886.0 195.0 168 120 120 275.0 2xM32x1.5 94
LA112M 762.0 843.0 219.0 181 120 120 146.0 2xM32x1.5 96
LA112ZM 790.0 871.0 219.0 181 120 120 250.0 2xM32x1.5 103
LA132S/M 822.0 924.0 259.0 195 140 140 186.5 2xM32x1.5 109
LA132ZM 868.0 970.0 259.0 195 140 140 294.5 2xM32x1.5 130
LA160M/L 924.5 1 043.0 313.5 227 165 165 212.0 2xM40x1.5 141
LA160ZL 972.5 1 091.0 313.5 227 165 165 365.0 2xM40x1.5 180

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014

4/150 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD88 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
110 262 HH 100 100
M12x21 LL 3,5 3,5
60°
115

Ø165

Ø130 j6

Ø130 j6
Ø190

Ø190
Z B A

ØAC
20
180

37
250

13 4
20

Ø25 H9
5
R3

50
210 56
Z
AD 170
200

108 105
5
u JS9 t 78 78
100

Ød H7
Ø80
AG

M
1 l9
O 180
210
165
Ød h6

4 Rmax 2.5

d l9 M t u
50 *) 44.5 M16 53.8 14
60 54.0 M20 64.4 18

*) Preferred series

KAD88 Weight
Motor k kB AC AD AG LL HH O KAD88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 68
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 68
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 73
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 77
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 77
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 83
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 86
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 96
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 98
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 105
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 111
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 132
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 140
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 179

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014

Siemens D 87.1 · 2011 4/151

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF88 (3-stage), flange-mounted design

KAF012

kB
k
110 262 HH 100 142
Ø13,5 LL 16 4
45°
115

Ø230 j6
Ø265

Ø300
Z B A

ØAC
20
180 -0,5

4 48 M16x26 13 115
6

55 55 170
170
Z
AD
200

108 105
5
t 78 78
u JS9
100

Ød H7
Ø80
AG

M
1 l9
180
210
165
O
Ød h6

4 Rmax 2.5

d l9 M t u
50 *) 44.5 M16 53.8 14
60 54.0 M20 64.4 18

*) Preferred series

KAF88 Weight
Motor k kB AC AD AG LL HH O KAF88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 72
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 72
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 77
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 81
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 81
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 87
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 90
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 100
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 102
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 109
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 115
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 136
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 148
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 187

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014 ➅ For note, see page 4/217

4/152 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ88 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
110 262 HH 100 100
M12x21 LL 3,5 3,5
60°
115

Ø130 j6

Ø130 j6
Ø165

Ø190

Ø190
Z B A

ØAC
20
180 -0,5

55
48
55
M16x26 13 115
170 4
170
Z
AD
200

5
108 105
t 78 78

u JS9
100

Ød H7
Ø80
AG

M
1 l9
O 180
210
165
Ød h6

4 Rmax 2.5

d l9 M t u
50 *) 44.5 M16 53.8 14
60 54.0 M20 64.4 18

*) Preferred series

KAZ88 Weight
Motor k kB AC AD AG LL HH O KAZ88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 65
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 65
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 70
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 74
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 74
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 80
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 84
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 94
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 95
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 102
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 108
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 129
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 141
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 180

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014

Siemens D 87.1 · 2011 4/153

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS88 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
112 -0,5 262 HH
25 LL 100 100
65
115
75

B A

Øg7
Z

ØAC
180 -0,5

20
125
55

4 55
40
55
Ø18 13 25 Ø18
138
150 165
Z
AD 200
200
q1 q
m4 m5
100

Ød H7

Ød1 H7
AG

l
O
m6 m7

Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
50 *) 50 241 29 30 34 35 144 105 132
60 60 241 29 30 34 35 144 105 132

*) Preferred series

KAS88 Weight
Motor k kB AC AD AG LL HH O KAS88
LA71 621.0 676.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 67
LA71Z 640.0 695.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 67
LA80 658.0 721.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 72
LA80Z 680.5 744.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 76
LA90S/L 689.0 760.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 77
LA90ZL 734.0 805.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 83
LA100L 735.0 816.0 195.0 168 120 120 143.0 2xM32x1.5 86
LA100ZL 805.0 886.0 195.0 168 120 120 275.0 2xM32x1.5 96
LA112M 762.0 843.0 219.0 181 120 120 146.0 2xM32x1.5 97
LA112ZM 790.0 871.0 219.0 181 120 120 250.0 2xM32x1.5 104
LA132S/M 822.0 924.0 259.0 195 140 140 186.5 2xM32x1.5 110
LA132ZM 868.0 970.0 259.0 195 140 140 294.5 2xM32x1.5 132
LA160M/L 924.5 1 043.0 313.5 227 165 165 212.0 2xM40x1.5 143
LA160ZL 972.5 1 091.0 313.5 227 165 165 365.0 2xM40x1.5 182

4/154 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS88 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
110 262 HH 100 100
M12x21 LL 3,5 3,5
60°
115

Ø165

Ø130 j6

Ø130 j6
Ø190

Ø190
B A

Øg7
Z

ØAC
20
180

37
250

13
4
20

Ø25 H9
5
R3

50
210 56
Z
AD 170
200
q1 q
m4 m5
100

Ød H7

Ød1 H7
AG

l
O
m6 m7
Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
50 *) 50 241 29 30 34 35 144 105 132
60 60 241 29 30 34 35 144 105 132

*) Preferred series

KADS88 Weight
Motor k kB AC AD AG LL HH O KADS88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 70
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 70
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 75
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 79
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 79
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 85
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 88
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 98
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 100
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 107
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 113
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 134
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 146
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 185

Siemens D 87.1 · 2011 4/155

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS88 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
110 262 HH 100 142
Ø13,5 LL 16 4
45°
115

Ø230 j6
Ø265

Ø300
B A

Øg7
Z

ØAC
20
180 -0,5

4 48 M16x26 13 115
6

55 55 170
170
Z
AD
200

q1 q
m4 m5
100

Ød1 H7
Ød H7
AG

l
m6 m7
Ød h6

Ød1 h6
O
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
50 *) 50 241 29 30 34 35 144 105 132
60 60 241 29 30 34 35 144 105 132

*) Preferred series

KAFS88 Weight
Motor k kB AC AD AG LL HH O KAFS88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 74
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 74
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 79
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 83
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 83
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 89
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 92
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 102
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 104
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 111
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 117
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 138
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 150
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 189

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/156 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS88 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
110 262 HH 100 100
M12x21 LL 3,5 3,5
60°
115

Ø165

Ø130 j6
Ø190

Ø190
Ø130 j6
B A

Øg7
Z

ØAC
20
180 -0,5

55
48
55
M16x26 13 115
170 4
170
Z
AD
200
q1 q
m4 m5
100

Ød1 H7
Ød H7
AG

l
O
m6 m7

Ød1 h6
Ød h6

Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
50 *) 50 241 29 30 34 35 144 105 132
60 60 241 29 30 34 35 144 105 132

*) Preferred series

KAZS88 Weight
Motor k kB AC AD AG LL HH O KAZS88
LA71 619.0 674.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 67
LA71Z 638.0 693.0 139.0 146 90 90 103.0 M20x1.5/M25x1.5 67
LA80 656.0 719.5 156.5 155 90 90 102.5 M20x1.5/M25x1.5 72
LA80Z 678.5 742.0 156.5 155 90 90 175.5 M20x1.5/M25x1.5 76
LA90S/L 687.0 758.0 174.0 163 90 90 102.5 M20x1.5/M25x1.5 76
LA90ZL 732.0 803.0 174.0 163 90 90 226.5 M20x1.5/M25x1.5 82
LA100L 733.0 814.0 195.0 168 120 120 143.0 2xM32x1.5 85
LA100ZL 803.0 884.0 195.0 168 120 120 275.0 2xM32x1.5 95
LA112M 760.0 841.0 219.0 181 120 120 146.0 2xM32x1.5 97
LA112ZM 788.0 869.0 219.0 181 120 120 250.0 2xM32x1.5 104
LA132S/M 820.0 922.0 259.0 195 140 140 186.5 2xM32x1.5 110
LA132ZM 866.0 968.0 259.0 195 140 140 294.5 2xM32x1.5 131
LA160M/L 922.5 1 041.0 313.5 227 165 165 212.0 2xM40x1.5 143
LA160ZL 970.5 1 089.0 313.5 227 165 165 365.0 2xM40x1.5 182

Siemens D 87.1 · 2011 4/157

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K108 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
132 -1 328 HH l 115 115 l
30 LL l3 l4
133

74
91

Ød to1

Ød to1
X
Z B A

ØAC
13
142
212 -1

DR
70

4
55 Ø22 20 Ø22
30

4 70
180
80 140
180 i
Z
AD 230
X
250 u 5

t
125
AG

d to1 l l3 l4 t u i q DR
60 *) m6 120 110 5 64 18 150 240
M20x42
80 m6 170 125 20 85 22 200 290

*) Preferred series

K108 Weight
Motor k kB AC AD AG LL HH O K108
LA80 729.0 792.5 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 133
LA80Z 751.5 815.0 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 137
LA90S/L 760.0 831.0 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 138
LA90ZL 805.0 876.0 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 144
LA100L 803.5 884.5 195.0 168.0 120 120 125.5 2xM32x1.5 146
LA100ZL 873.5 954.5 195.0 168.0 120 120 257.5 2xM32x1.5 156
LA112M 829.5 910.5 219.0 181.0 120 120 127.5 2xM32x1.5 158
LA112ZM 857.5 938.5 219.0 181.0 120 120 231.5 2xM32x1.5 165
LA132S/M 889.5 991.5 259.0 195.0 140 140 168.0 2xM32x1.5 169
LA132ZM 935.5 1 037.5 259.0 195.0 140 140 276.0 2xM32x1.5 191
LA160M/L 994.0 1 112.5 313.5 227.0 165 165 195.5 2xM40x1.5 204
LA160ZL 1 042.0 1 160.5 313.5 227.0 165 165 348.5 2xM40x1.5 243
LG180M/L 1 053.5 1 175.5 348.0 322.5 260 192 212.5 2xM40x1.5 296
LG180ZM/ZL 1 104.5 1 226.5 348.0 322.5 260 192 212.5 2xM40x1.5 326

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/158 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF108 (3-stage), flange-mounted design (A-type)

KF012

kB
k 115 276
135,5 328 HH 120
Ø17,5 LL 18 5 6
45°
133

110 5

Ø60 m6
Ø250 h6
Ø300 X

Ø350
Z

ØAC
120
4
13
212 -1

DR M20x42
65 M16x28 20 155 4
70 70 210
X
225
Z 18 5
AD
250

64
125
AG

KF108 Weight
Motor k kB AC AD AG LL HH O KF108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 146
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 150
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 151
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 157
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 159
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 169
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 171
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 178
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 183
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 204
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 217
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 256
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 309
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 339

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/159

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA108 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
132 -1 328 HH
30 LL 115 115
133

74
91

Z B A

ØAC
13
142
212 -1

70

4 55 Ø22 Ø22
30
70 80 140
180 180
Z
AD 230
250

5
124 120
t 93 93

u JS9
125

Ød H7
Ø95
AG

M
1 l9
O 208
240
185

Ød h6

4 Rmax 2.5

d l9 M t u
60 *) 64.0 M20 64.4 18
70 63.5 M20 74.9 20

*) Preferred series

KA108 Weight
Motor k kB AC AD AG LL HH O KA108
LA80 729.0 792.5 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 120
LA80Z 751.5 815.0 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 124
LA90S/L 760.0 831.0 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 125
LA90ZL 805.0 876.0 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 131
LA100L 803.5 884.5 195.0 168.0 120 120 125.5 2xM32x1.5 133
LA100ZL 873.5 954.5 195.0 168.0 120 120 257.5 2xM32x1.5 143
LA112M 829.5 910.5 219.0 181.0 120 120 127.5 2xM32x1.5 145
LA112ZM 857.5 938.5 219.0 181.0 120 120 231.5 2xM32x1.5 152
LA132S/M 889.5 991.5 259.0 195.0 140 140 168.0 2xM32x1.5 157
LA132ZM 935.5 1 037.5 259.0 195.0 140 140 276.0 2xM32x1.5 178
LA160M/L 994.0 1 112.5 313.5 227.0 165 165 195.5 2xM40x1.5 191
LA160ZL 1 042.0 1 160.5 313.5 227.0 165 165 348.5 2xM40x1.5 230
LG180M/L 1 053.5 1 175.5 348.0 322.5 260 192 212.5 2xM40x1.5 283
LG180ZM/ZL 1 104.5 1 226.5 348.0 322.5 260 192 212.5 2xM40x1.5 313

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014

4/160 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD108 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
135,5 328 HH 115 115
M16x28 LL 4 4
60°
133

Ø215

Ø180 j6
Ø245

Ø245
Ø180 j6
Z B A

ØAC
7
13
212

47,5
300

20 4
25

Ø25 H9
0
R4

50
275 56
210
Z
AD
250

5
124 120
t 93 93
u JS9
125

Ød H7
Ø95
AG

M
1 l9
O 208
240
185
Ød h6

4 Rmax 2.5

d l9 M t u
60 *) 64.0 M20 64.4 18
70 63.5 M20 74.9 20
)
* Preferred series

KAD108 Weight
Motor k kB AC AD AG LL HH O KAD108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 128
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 132
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 133
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 139
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 141
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 151
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 153
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 160
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 164
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 186
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 199
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 238
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 291
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 321

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/161

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF108 (3-stage), flange-mounted design

KAF012

kB
k
135,5 328 HH 115 156
Ø17,5 LL 18 5
45°
133

Ø250 h6
Ø300

Ø350
Z B A

ØAC
13
212 -1

4 65 M16x28 20 155
6

70 70 210
225
Z
AD
250

5
124 120
t 93 93
u JS9
125

Ød H7
Ø95
AG

M
1 l9
208
240
185
O
Ød h6

4 Rmax 2.5

d l9 M t u
60 *) 64.0 M20 64.4 18
70 63.5 M20 74.9 20

*) Preferred series

KAF108 Weight
Motor k kB AC AD AG LL HH O KAF108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 133
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 137
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 137
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 143
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 145
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 155
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 158
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 165
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 169
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 190
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 204
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 243
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 296
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 326

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014 ➅ For note, see page 4/217

4/162 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ108 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
135,5 328 HH 115 115
M16x28 LL 4 4
60°
133

Ø215

Ø180 j6
Ø180 j6
Ø245

Ø245
Z B A

ØAC
7
13
212 -1

65 M16x28 20 155 4
70 70 210
225
Z
AD
250
124 120
5
t 93 93
u JS9
125

Ød H7
Ø95
AG

M
1 l9
O 208
240
Ød h6 185

4 Rmax 2.5

d l9 M t u
60 *) 64.0 M20 64.4 18
70 63.5 M20 74.9 20

*) Preferred series

KAZ108 Weight
Motor k kB AC AD AG LL HH O KAZ108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 123
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 127
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 128
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 134
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 136
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 146
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 148
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 155
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 160
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 181
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 194
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 233
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 286
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 316

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➀ DIN EN ISO 4014 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/163

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS108 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
132 -1 328 HH
30 LL 115 115
74
133
91

B A

Øg7
Z

ØAC
13
142
212 -1

70

4 70
55
80
Ø22 20 30 Ø22
140
180 180
Z
AD 230
250
q1 q
m4 m5
125

Ød1 H7
Ød H7
AG

l
O
m6 m7

Ød1 h6
Ød h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
65 *) 65 280 30 40 35 45 168 120 144
70 70 280 30 40 35 45 168 120 144

*) Preferred series

KAS108 Weight
Motor k kB AC AD AG LL HH O KAS108
LA80 729.0 792.5 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 123
LA80Z 751.5 815.0 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 127
LA90S/L 760.0 831.0 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 127
LA90ZL 805.0 876.0 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 133
LA100L 803.5 884.5 195.0 168.0 120 120 125.5 2xM32x1.5 135
LA100ZL 873.5 954.5 195.0 168.0 120 120 257.5 2xM32x1.5 145
LA112M 829.5 910.5 219.0 181.0 120 120 127.5 2xM32x1.5 147
LA112ZM 857.5 938.5 219.0 181.0 120 120 231.5 2xM32x1.5 154
LA132S/M 889.5 991.5 259.0 195.0 140 140 168.0 2xM32x1.5 159
LA132ZM 935.5 1 037.5 259.0 195.0 140 140 276.0 2xM32x1.5 170
LA160M/L 994.0 1 112.5 313.5 227.0 165 165 195.5 2xM40x1.5 194
LA160ZL 1 042.0 1 160.5 313.5 227.0 165 165 348.5 2xM40x1.5 233
LG180M/L 1 053.5 1 175.5 348.0 322.5 260 192 212.5 2xM40x1.5 286
LG180ZM/ZL 1 104.5 1 226.5 348.0 322.5 260 192 212.5 2xM40x1.5 316

4/164 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS108 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
135,5 328 HH 115 115
M16x28 LL 4 4
60°
133

Ø215

Ø180 j6

Ø180 j6
Ø245

Ø245
B A

Øg7
Z

ØAC
7
13
212

47,5
300

20
4
25

Ø25 H9
0
R4

50
275 56
210
Z
AD
250
q1 q
m4 m5
125

Ød1 H7
Ød H7
AG

l
O
m6 m7

Ød1 h6
Ød h6

Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
65 *) 65 280 30 40 35 45 168 120 144
70 70 280 30 40 35 45 168 120 144

*) Preferred series

KADS108 Weight
Motor k kB AC AD AG LL HH O KADS108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 130
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 134
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 135
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 141
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 143
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 153
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 155
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 162
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 167
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 188
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 201
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 240
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 293
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 323

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/165

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS108 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
135,5 328 HH 115 156
Ø17,5 LL 18 5
45°
133

Ø250 h6
Ø300

Ø350
B A

Øg7
Z

ØAC
13
212 -1

4 65 M16x28 20 155
6

70 70 210
225
Z
AD
250

q1 q
m4 m5
125

Ød1 H7
Ød H7
AG

l
m6 m7

Ød1 h6
Ød h6

O
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
65 *) 65 280 30 40 35 45 168 120 144
70 70 280 30 40 35 45 168 120 144

*) Preferred series

KAFS108 Weight
Motor k kB AC AD AG LL HH O KAFS108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 136
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 140
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 140
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 146
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 148
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 158
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 161
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 168
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 172
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 193
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 207
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 246
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 299
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 329

➅ For note, see page 4/217

4/166 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS108 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
135,5 328 HH 115 115
M16x28 LL 4 4
60°
133

Ø215

Ø180 j6
Ø245

Ø245
Ø180 j6
B A

Øg7
Z

ØAC
7
13
212 -1

70
65
70
M16x28 20 155
210 4
225
Z
AD
250
q1 q
125 m4 m5

Ød1 H7
Ød H7
AG

l
O
m6 m7

Ød1 h6
Ød h6

Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
65 *) 65 280 30 40 35 45 168 120 144
70 70 280 30 40 35 45 168 120 144

*) Preferred series

KAZS108 Weight
Motor k kB AC AD AG LL HH O KAZS108
LA80 732.5 796.0 156.5 155.0 90 90 87.5 M20x1.5/M25x1.5 116
LA80Z 755.0 818.5 156.5 155.0 90 90 160.5 M20x1.5/M25x1.5 120
LA90S/L 763.5 834.5 174.0 163.0 90 90 87.5 M20x1.5/M25x1.5 120
LA90ZL 808.5 879.5 174.0 163.0 90 90 211.5 M20x1.5/M25x1.5 126
LA100L 807.0 888.0 195.0 168.0 120 120 125.5 2xM32x1.5 128
LA100ZL 877.0 958.0 195.0 168.0 120 120 257.5 2xM32x1.5 138
LA112M 833.0 914.0 219.0 181.0 120 120 127.5 2xM32x1.5 140
LA112ZM 861.0 942.0 219.0 181.0 120 120 231.5 2xM32x1.5 147
LA132S/M 893.0 995.0 259.0 195.0 140 140 168.0 2xM32x1.5 152
LA132ZM 939.0 1 041.0 259.0 195.0 140 140 276.0 2xM32x1.5 173
LA160M/L 997.5 1 116.0 313.5 227.0 165 165 195.5 2xM40x1.5 187
LA160ZL 1 045.5 1 164.0 313.5 227.0 165 165 348.5 2xM40x1.5 226
LG180M/L 1 057.0 1 179.0 348.0 322.5 260 192 212.5 2xM40x1.5 279
LG180ZM/ZL 1 108.0 1 230.0 348.0 322.5 260 192 212.5 2xM40x1.5 309

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/167

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K128 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
160 -1 371 HH l 145 145 l
35 LL l3 l4
158

90
105

Ød to1

Ød to1
X
Z B A

ØAC
20
190
265 -1

DR
80

4
75 Ø26 17 Ø26
35

4 80
240
80 190
240 i
Z
AD 290
X
300 u 5

t
150
AG

d to1 l l3 l4 t u i q DR
70 *) m6 140 125 7.5 74.5 20 170 290 M20x42
90 m6 170 140 15.0 95.0 25 200 320 M24x50
)
* Preferred series

K128 Weight
Motor k kB AC AD AG LL HH O K128
LA90S/L 819.5 890.5 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 210
LA90ZL 864.5 935.5 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 216
LA100L 862.5 943.5 195.0 168.0 120 120 113.5 2xM32x1.5 218
LA100ZL 932.5 1 013.5 195.0 168.0 120 120 245.5 2xM32x1.5 228
LA112M 889.0 970.0 219.0 181.0 120 120 116.0 2xM32x1.5 230
LA112ZM 917.0 998.0 219.0 181.0 120 120 220.0 2xM32x1.5 237
LA132S/M 948.0 1 050.0 259.0 195.0 140 140 155.5 2xM32x1.5 240
LA132ZM 994.0 1 096.0 259.0 195.0 140 140 263.5 2xM32x1.5 261
LA160M/L 1 053.5 1 172.0 313.5 227.0 165 165 184.0 2xM40x1.5 275
LA160ZL 1 101.5 1 220.0 313.5 227.0 165 165 337.0 2xM40x1.5 314
LG180M/L 1 110.0 1 232.0 348.0 322.5 260 192 198.0 2xM40x1.5 371
LG180ZM/ZL 1 161.0 1 283.0 348.0 322.5 260 192 198.0 2xM40x1.5 401
LG200L 1 166.0 1 292.0 385.0 301.0 260 192 228.0 2xM50x1.5 451
K4-LGI225S 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 607
K4-LGI225M 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 595
K4-LGI225ZM 1 486.5 1 725.5 442.0 325.0 260 192 443.0 2xM50x1.5 653

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/168 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF128 (3-stage), flange-mounted design (A-type)

KF012

kB
k 145 331,5
156,5 371 HH 140
22°30' Ø17,5 LL 22 5 6

45°
158

125 7,5

Ø70 m6
Ø350 h6
Ø400 X

Ø450
Z

ØAC
140
20

4
265 -1

DR M20x42
83 M20x34 17 195 4
80 80 255
X
248
Z 20 5
AD
300

74,5
150
AG

KF128 Weight
Motor k kB AC AD AG LL HH O KF128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 235
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 241
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 243
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 253
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 255
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 262
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 265
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 287
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 300
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 339
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 397
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 427
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 477
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 633
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 621
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 679

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/169

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA128 (3-stage), housing-flange-mounted design (C-type)

KA012
kB
k
160 -1 371 HH
35 LL 145 145
90
158
105

Z B A

ØAC
20
190
265 -1

80

75 Ø26 35 Ø26
4 80
240
80 190
240
Z
AD 290
300

5
154 150
t 123 123

u JS9
150

Ød H7
Ø110
AG

M
1 l9
O 263
300
240

Ød h6
4 Rmax 2.5

d l9 M t u
70 *) 63.5 M20 74.9 20
80 63.5 M20 85.4 22
)
* Preferred series

KA128 Weight
Motor k kB AC AD AG LL HH O KA128
LA90S/L 819.5 890.5 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 190
LA90ZL 864.5 935.5 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 196
LA100L 862.5 943.5 195.0 168.0 120 120 113.5 2xM32x1.5 198
LA100ZL 932.5 1 013.5 195.0 168.0 120 120 245.5 2xM32x1.5 208
LA112M 889.0 970.0 219.0 181.0 120 120 116.0 2xM32x1.5 210
LA112ZM 917.0 998.0 219.0 181.0 120 120 220.0 2xM32x1.5 217
LA132S/M 948.0 1 050.0 259.0 195.0 140 140 155.5 2xM32x1.5 220
LA132ZM 994.0 1 096.0 259.0 195.0 140 140 263.5 2xM32x1.5 242
LA160M/L 1 053.5 1 172.0 313.5 227.0 165 165 184.0 2xM40x1.5 255
LA160ZL 1 101.5 1 220.0 313.5 227.0 165 165 337.0 2xM40x1.5 294
LG180M/L 1 110.0 1 232.0 348.0 322.5 260 192 198.0 2xM40x1.5 352
LG180ZM/ZL 1 161.0 1 283.0 348.0 322.5 260 192 198.0 2xM40x1.5 382
LG200L 1 166.0 1 292.0 385.0 301.0 260 192 228.0 2xM50x1.5 432
K4-LGI225S 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 588
K4-LGI225M 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 576
K4-LGI225ZM 1 486.5 1 725.5 442.0 325.0 260 192 443.0 2xM50x1.5 634

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885

4/170 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD128 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
156,5 371 HH 145 145
M16x28 LL 4 4
60?
158

Ø265

Ø230 j6
Ø295

Ø295
Ø230 j6
Z B A

ØAC
7
20
265

41
350

17
4
30

Ø25 H9
0
R4

50
310 56
255
Z
AD
300

5
154 150
t 123 123
u JS9
150

Ød H7
Ø110
AG

M
1 l9
O 263
300
240
Ød h6

4 Rmax 2.5
d l9 M t u
70 *) 63.5 M20 74.9 20
80 63.5 M20 85.4 22

*) Preferred series

KAD128 Weight
Motor k kB AC AD AG LL HH O KAD128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 204
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 210
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 212
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 222
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 224
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 231
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 235
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 256
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 269
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 308
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 366
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 396
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 446
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 602
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 590
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 648

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/171

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF128 (3-stage), flange-mounted design

KAF012

kB
k
156,5 371 HH 145 191,5
22°30' Ø17,5 LL 22 5
°
45
158

Ø400

Ø350 h6
Ø450
Z B A

ØAC
20
265 -1

4 83 M20x34 17 195
6

80 80 255
248
Z
AD
300

5
154 150
t 123 123
u JS9
150

Ød H7
Ø110
AG

M
1 l9
263
300
240
O
Ød h6

4 Rmax 2.5

d l9 M t u
70 *) 63.5 M20 74.9 20
80 63.5 M20 85.4 22

*) Preferred series

KAF128 Weight
Motor k kB AC AD AG LL HH O KAF128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 215
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 221
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 223
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 233
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 235
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 242
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 246
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 267
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 280
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 319
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 377
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 407
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 457
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 603
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 601
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 659

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/172 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ128 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
156,5 371 HH 145 145
M16x28 LL 4 4
60°
158

Ø265

Ø230 j6
Ø230 j6
Ø295

Ø295
Z B A

ØAC
7
20
265 -1

80
83
80
M20x34 17 195
255
4
248
Z
AD
300
154 150
5
t 123 123

u JS9
150

Ød H7
Ø110
AG

M
1 l9
O 263
300
240
Ød h6

4 Rmax 2.5

d l9 M t u
)
70 * 63.5 M20 74.9 20
80 63.5 M20 85.4 22

*) Preferred series

KAZ128 Weight
Motor k kB AC AD AG LL HH O KAZ128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 198
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 204
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 206
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 216
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 218
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 225
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 228
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 250
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 263
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 302
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 360
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 390
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 440
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 596
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 584
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 642

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/173

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS128 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
160 -1 371 HH
35 LL 145 145
90
158
105

B A

Øg7
Z

ØAC
20
190
265 -1

80

4 80
75
80
Ø26 17
35
Ø26
190
240 240
Z
AD 290
300
q1 q
m4 m5
150

Ød1 H7
Ød H7
AG

l
O
m6 m7

Ød1 h6
Ød h6

Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
75 *) 75 345 44 50 49 55 207 150 180
80 80 345 40 50 45 55 207 150 180

*) Preferred series

KAS128 Weight
Motor k kB AC AD AG LL HH O KAS128
LA90S/L 819.5 890.5 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 194
LA90ZL 864.5 935.5 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 200
LA100L 862.5 943.5 195.0 168.0 120 120 113.5 2xM32x1.5 202
LA100ZL 932.5 1 013.5 195.0 168.0 120 120 245.5 2xM32x1.5 212
LA112M 889.0 970.0 219.0 181.0 120 120 116.0 2xM32x1.5 214
LA112ZM 917.0 998.0 219.0 181.0 120 120 220.0 2xM32x1.5 221
LA132S/M 948.0 1 050.0 259.0 195.0 140 140 155.5 2xM32x1.5 225
LA132ZM 994.0 1 096.0 259.0 195.0 140 140 263.5 2xM32x1.5 246
LA160M/L 1 053.5 1 172.0 313.5 227.0 165 165 184.0 2xM40x1.5 259
LA160ZL 1 101.5 1 220.0 313.5 227.0 165 165 337.0 2xM40x1.5 299
LG180M/L 1 110.0 1 232.0 348.0 322.5 260 192 198.0 2xM40x1.5 356
LG180ZM/ZL 1 161.0 1 283.0 348.0 322.5 260 192 198.0 2xM40x1.5 386
LG200L 1 166.0 1 292.0 385.0 301.0 260 192 228.0 2xM50x1.5 436
K4-LGI225S 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 592
K4-LGI225M 1 426.5 1 665.5 442.0 325.0 260 192 443.0 2xM50x1.5 580
K4-LGI225ZM 1 486.5 1 725.5 442.0 325.0 260 192 443.0 2xM50x1.5 638

4/174 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS128 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
156,5 371 HH 145 145
M16x28 LL 4 4
60?
158

Ø265

Ø230 j6

Ø230 j6
Ø295

Ø295
B A

Øg7
Z

ØAC
7
20
265

41
350

17
4
30

Ø25 H9
0
R4

50
310 56
255
Z
AD
300
q1 q
m4 m5
150

Ød H7
Ød H7
AG

l
O
m6 m7
Ød h6

Ød h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
75 *) 75 345 44 50 49 55 207 150 180
80 80 345 40 50 45 55 207 150 180

*) Preferred series

KADS128 Weight
Motor k kB AC AD AG LL HH O KADS128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 209
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 215
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 217
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 227
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 228
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 235
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 239
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 260
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 274
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 313
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 370
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 400
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 450
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 606
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 594
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 652

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/175

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS128 (3-stage), flange-mounted design with flange and shrink disk
KAFS012

kB
k
156,5 371 HH 145 191,5
22°30' Ø17,5 LL 22 5
°
45
158

Ø350 h6
Ø400

Ø450
Z B A

Øg7
ØAC
20
265 -1

4 83 M20x34 17 195
6

80 80 255
248
Z
AD
300

q1 q
m4 m5
150

Ød1 H7
Ød H7
AG

l
m6 m7

Ød1 h6
Ød h6

O
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
75 *) 75 345 44 50 49 55 207 150 180
80 80 345 40 50 45 55 207 150 180

*) Preferred series

KAFS128 Weight
Motor k kB AC AD AG LL HH O KAFS128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 220
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 226
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 228
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 238
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 239
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 246
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 250
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 271
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 285
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 324
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 381
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 411
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 461
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 617
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 605
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 663

➅ For note, see page 4/217

4/176 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS128 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
156,5 371 HH 145 145
M16x28 LL 4 4
60°
158

Ø265

Ø230 j6
Ø295

Ø295
Ø230 j6
B A

Øg7
Z

ØAC
7
20
265 -1

80
83
80
M20x34 17 195
255 4
248
Z
AD
300
q1 q
150 m4 m5

Ød H7

Ød1H7
AG

l
O
m6 m7
Ød h6

Ød1 h6
Rmax 1.0

d d1 l m4 m5 m6 m7 q1 q g7
75 *) 75 345 44 50 49 55 207 150 180
80 80 345 40 50 45 55 207 150 180

*) Preferred series

KAZS128 Weight
Motor k kB AC AD AG LL HH O KAZS128
LA90S/L 816.0 887.0 174.0 163.0 90 90 76.0 M20x1.5/M25x1.5 202
LA90ZL 861.0 932.0 174.0 163.0 90 90 200.0 M20x1.5/M25x1.5 208
LA100L 859.0 940.0 195.0 168.0 120 120 113.5 2xM32x1.5 210
LA100ZL 929.0 1 010.0 195.0 168.0 120 120 245.5 2xM32x1.5 220
LA112M 885.5 966.5 219.0 181.0 120 120 116.0 2xM32x1.5 222
LA112ZM 913.5 994.5 219.0 181.0 120 120 220.0 2xM32x1.5 229
LA132S/M 944.5 1 046.5 259.0 195.0 140 140 155.5 2xM32x1.5 233
LA132ZM 990.5 1 092.5 259.0 195.0 140 140 263.5 2xM32x1.5 254
LA160M/L 1 050.0 1 168.5 313.5 227.0 165 165 184.0 2xM40x1.5 267
LA160ZL 1 098.0 1 216.5 313.5 227.0 165 165 337.0 2xM40x1.5 306
LG180M/L 1 106.5 1 228.5 348.0 322.5 260 192 198.0 2xM40x1.5 364
LG180ZM/ZL 1 157.5 1 279.5 348.0 322.5 260 192 198.0 2xM40x1.5 394
LG200L 1 162.5 1 288.5 385.0 301.0 260 192 228.0 2xM50x1.5 444
K4-LGI225S 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 600
K4-LGI225M 1 423.0 1 662.0 442.0 325.0 260 192 443.0 2xM50x1.5 588
K4-LGI225ZM 1 483.0 1 722.0 442.0 325.0 260 192 443.0 2xM50x1.5 646

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/177

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K148 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
200 -1 422 HH l 169 169 l
40 LL l3 l4
89
188
140

Ød to1

Ød to1
X
Z B A

ØAC
37
220
315 -1

90

DR
4
95 Ø33 20 Ø33
40

4 90
280
106 218
270 i
Z
AD 340
X
360 u 5

t
180
AG

d to1 l l3 l4 t u i q DR
90 *) m6 170 140 15 95 25 210 345
M24x50
100 m6 210 180 15 106 28 250 385

*) Preferred series

K148 Weight
Motor k kB AC AD AG LL HH O K148
LA100L 944.0 1 025.0 195.0 168.0 120 120 104.0 2xM32x1.5 319
LA100ZL 1 014.0 1 095.0 195.0 168.0 120 120 236.0 2xM32x1.5 329
LA112M 969.5 1 050.5 219.0 181.0 120 120 105.5 2xM32x1.5 331
LA112ZM 997.5 1 078.5 219.0 181.0 120 120 209.5 2xM32x1.5 338
LA132S/M 1 028.5 1 130.5 259.0 195.0 140 140 145.0 2xM32x1.5 340
LA132ZM 1 074.5 1 176.5 259.0 195.0 140 140 253.0 2xM32x1.5 361
LA160M/L 1 128.0 1 246.5 313.5 227.0 165 165 167.5 2xM40x1.5 379
LA160ZL 1 176.0 1 294.5 313.5 227.0 165 165 320.5 2xM40x1.5 418
LG180M/L 1 187.5 1 309.5 348.0 322.5 260 192 184.5 2xM40x1.5 470
LG180ZM/ZL 1 238.5 1 360.5 348.0 322.5 260 192 184.5 2xM40x1.5 500
LG200L 1 243.5 1 369.5 385.0 301.0 260 192 214.5 2xM50x1.5 550
LG225S 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 626
LG225M 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 614
LG225ZM 1 374.5 1 613.5 442.0 325.0 260 192 250.5 2xM50x1.5 672
K4-LGI250M 1 601.5 1 826.5 495.0 392.0 300 236 469.5 2xM63x1.5 794
K4-LGI250ZM 1 671.5 1 896.5 495.0 392.0 300 236 469.5 2xM63x1.5 897

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/178 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF148 (3-stage), flange-mounted design (A-type)

KF012

kB
k 169 386
196 422 HH 170
22°30' Ø17,5 LL 22 5 6

45°
188

140 15

Ø90 m6
Ø350 h6
Ø400 X

Ø450
Z

ØAC
170
37

4
315 -1

DR M24x50
100 M24x41 20 210 4
90 90 286
X
290
Z 25 5
AD
360

95
180
AG

KF148 Weight
Motor k kB AC AD AG LL HH O KF148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 349
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 359
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 361
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 368
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 370
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 391
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 409
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 448
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 500
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 530
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 580
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 656
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 644
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 702
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 824
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 927

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/179

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA148 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
200 -1 422 HH
40 LL 169 169
89
188
140

Z B A

ØAC
37
220
315 -1

90

4 95 Ø33 Ø33
40
90 106 218
280 270
Z
AD 340
360

5
179 175
t 148 148

u JS9
180

Ød H7
Ø120
AG

M
1 l9
O 310
350
285

Ød h6

4 Rmax 2.5

d l9 M t u
80 *) 63.5 M20 85.4 22
90 72.0 M24 95.4 25

*) Preferred series

KA148 Weight
Motor k kB AC AD AG LL HH O KA148
LA100L 944.0 1 025.0 195.0 168.0 120 120 104.0 2xM32x1.5 291
LA100ZL 1 014.0 1 095.0 195.0 168.0 120 120 236.0 2xM32x1.5 301
LA112M 969.5 1 050.5 219.0 181.0 120 120 105.5 2xM32x1.5 303
LA112ZM 997.5 1 078.5 219.0 181.0 120 120 209.5 2xM32x1.5 310
LA132S/M 1 028.5 1 130.5 259.0 195.0 140 140 145.0 2xM32x1.5 312
LA132ZM 1 074.5 1 176.5 259.0 195.0 140 140 253.0 2xM32x1.5 333
LA160M/L 1 128.0 1 246.5 313.5 227.0 165 165 167.5 2xM40x1.5 351
LA160ZL 1 176.0 1 294.5 313.5 227.0 165 165 320.5 2xM40x1.5 390
LG180M/L 1 187.5 1 309.5 348.0 322.5 260 192 184.5 2xM40x1.5 442
LG180ZM/ZL 1 238.5 1 360.5 348.0 322.5 260 192 184.5 2xM40x1.5 472
LG200L 1 243.5 1 369.5 385.0 301.0 260 192 214.5 2xM50x1.5 522
LG225S 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 598
LG225M 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 586
LG225ZM 1 374.5 1 613.5 442.0 325.0 260 192 250.5 2xM50x1.5 644
K4-LGI250M 1 601.5 1 826.5 495.0 392.0 300 236 469.5 2xM63x1.5 766
K4-LGI250ZM 1 671.5 1 896.5 495.0 392.0 300 236 469.5 2xM63x1.5 869

➀ DIN EN ISO 4014 ➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/180 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD148 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
196 422 HH 169 169
45° M20x34 LL 5 5
188

0
Ø30

Ø250 h6

Ø250 h6
Ø335

Ø335
Z B A

ØAC
7
37
315

45
450

20
4
36

Ø40 H9
0
R6

80
360 88
286
Z
AD
360

5
179 175
u JS9 t 148 148
180

Ød H7
Ø120
AG

M
1 l9
O 310
350
285
Ød h6

4 Rmax 2.5

d l9 M t u
80 *) 63.5 M20 85.4 22
90 72.0 M24 95.4 25
*) Preferred series

KAD148 Weight
Motor k kB AC AD AG LL HH O KAD148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 319
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 329
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 330
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 337
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 339
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 361
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 379
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 418
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 470
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 500
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 550
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 626
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 614
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 672
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 794
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 897

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/181

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF148 (3-stage), flange-mounted design

KAF012

kB
k
196 422 HH 169 216
22°30' Ø17,5 LL 22 5
°
45
188

Ø400

Ø350 h6
Ø450
Z B A

ØAC
37
315 -1

4 100 M24x41 20 210

6

90 90 286
290
Z
AD
360

5
179 175
t 148 148
u JS9
180

Ød H7
Ø120
AG

M
1 l9
310
350
285
O
Ød h6

4 Rmax 2.5

d l9 M t u
80 *) 63.5 M20 85.4 22
90 72.0 M24 95.4 25
*) Preferred series

KAF148 Weight
Motor k kB AC AD AG LL HH O KAF148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 321
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 331
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 333
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 340
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 342
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 363
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 381
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 420
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 472
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 502
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 552
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 628
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 616
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 674
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 796
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 899

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/182 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ148 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
196 422 HH 169 169
45° M20x34 LL 5 5
188

0
Ø30

Ø250 h6
Ø250 h6
Ø335

Ø335
Z B A

ØAC
7
37
315 -1

100
90 90
M24x41 20 210
286
4
290
Z
AD
360

5
179 175
t 148 148

u JS9
180

Ød H7
Ø120
AG

M
1 l9
O 310
350
285
Ød h6

4 Rmax 2.5

d l9 M t u
80 *) 63.5 M20 85.4 22
90 72.0 M24 95.4 25
*) Preferred series

KAZ148 Weight
Motor k kB AC AD AG LL HH O KAZ148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 302
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 312
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 314
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 321
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 323
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 344
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 362
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 401
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 453
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 483
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 533
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 609
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 597
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 655
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 777
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 880

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/183

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS148 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
200 -1 422 HH
40 LL 169 169
89
188
140

Ø210
Z B A

ØAC
37
220
315 -1

90

4 90
95
106
Ø33 20 40 Ø33
218
280 270
Z
AD 340
360
243 175
49 60
180

Ø95 H7

Ø95 H7
AG

404
O
54 65

Ø95 h6

Ø95 h6
Rmax 1.0

KAS148 Weight
Motor k kB AC AD AG LL HH O KAS148
LA100L 944.0 1 025.0 195.0 168.0 120 120 104.0 2xM32x1.5 298
LA100ZL 1 014.0 1 095.0 195.0 168.0 120 120 236.0 2xM32x1.5 308
LA112M 969.5 1 050.5 219.0 181.0 120 120 105.5 2xM32x1.5 310
LA112ZM 997.5 1 078.5 219.0 181.0 120 120 209.5 2xM32x1.5 317
LA132S/M 1 028.5 1 130.5 259.0 195.0 140 140 145.0 2xM32x1.5 319
LA132ZM 1 074.5 1 176.5 259.0 195.0 140 140 253.0 2xM32x1.5 340
LA160M/L 1 128.0 1 246.5 313.5 227.0 165 165 167.5 2xM40x1.5 358
LA160ZL 1 176.0 1 294.5 313.5 227.0 165 165 320.5 2xM40x1.5 397
LG180M/L 1 187.5 1 309.5 348.0 322.5 260 192 184.5 2xM40x1.5 449
LG180ZM/ZL 1 238.5 1 360.5 348.0 322.5 260 192 184.5 2xM40x1.5 479
LG200L 1 243.5 1 369.5 385.0 301.0 260 192 214.5 2xM50x1.5 529
LG225S 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 605
LG225M 1 314.5 1 553.5 442.0 325.0 260 192 250.5 2xM50x1.5 593
LG225ZM 1 374.5 1 613.5 442.0 325.0 260 192 250.5 2xM50x1.5 651
K4-LGI250M 1 601.5 1 826.5 495.0 392.0 300 236 469.5 2xM63x1.5 773
K4-LGI250ZM 1 671.5 1 896.5 495.0 392.0 300 236 469.5 2xM63x1.5 876

4/184 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS148 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
196 422 HH 169 169
45° M20x34 LL 5 5
188

0
Ø30

Ø250 h6

Ø250 h6
Ø335

Ø335
Ø210
Z B A

ØAC
7
37
315

45
450

20
4
36

Ø40 H9
0
R6

80
360 88
286
Z
AD
360
243 175
49 60
180

Ø95 H7

Ø95 H7
AG

404
O
54 65
Ø95 h6

Ø95 h6
Rmax 1.0

KADS148 Weight
Motor k kB AC AD AG LL HH O KADS148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 326
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 336
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 337
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 344
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 346
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 368
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 386
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 425
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 477
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 507
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 557
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 633
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 621
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 679
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 801
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 904

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/185

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS148 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
196 422 HH 169 216
22°30' Ø17,5 LL 22 5
°
45
188

Ø350 h6
Ø400

Ø450
Ø210
Z B A

ØAC
37
315 -1

4 100 M24x41 20 210

6

90 90 286
290
Z
AD
360

243 175
49 60
180

Ø95 H7

Ø95 H7
AG

404
54 65
Ø95 h6

Ø95 h6
O
Rmax 1.0

KAFS148 Weight
Motor k kB AC AD AG LL HH O KAFS148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 328
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 338
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 340
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 347
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 349
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 360
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 388
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 427
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 479
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 509
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 559
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 635
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 623
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 681
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 803
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 906

➅ For note, see page 4/217

4/186 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS148 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
196 422 HH 169 169
45° M20x34 LL 5 5
188

0
Ø30

Ø250 h6

Ø250 h6
Ø335

Ø335
Ø210
Z B A

ØAC
7
37
315 -1

100
90 90
M24x41 20 210
286 4
290
Z
AD
360
243 175
180 49 60

Ø95 H7

Ø95 H7
AG

404
O
54 65
Ø95 h6

Ø95 h6
Rmax 1.0

KAZS148 Weight
Motor k kB AC AD AG LL HH O KAZS148
LA100L 940.0 1 021.0 195.0 168.0 120 120 104.0 2xM32x1.5 309
LA100ZL 1 010.0 1 091.0 195.0 168.0 120 120 236.0 2xM32x1.5 319
LA112M 965.5 1 046.5 219.0 181.0 120 120 105.5 2xM32x1.5 321
LA112ZM 993.5 1 074.5 219.0 181.0 120 120 209.5 2xM32x1.5 328
LA132S/M 1 024.5 1 126.5 259.0 195.0 140 140 145.0 2xM32x1.5 330
LA132ZM 1 070.5 1 172.5 259.0 195.0 140 140 253.0 2xM32x1.5 351
LA160M/L 1 124.0 1 242.5 313.5 227.0 165 165 167.5 2xM40x1.5 369
LA160ZL 1 172.0 1 290.5 313.5 227.0 165 165 320.5 2xM40x1.5 408
LG180M/L 1 183.5 1 305.5 348.0 322.5 260 192 184.5 2xM40x1.5 460
LG180ZM/ZL 1 234.5 1 356.5 348.0 322.5 260 192 184.5 2xM40x1.5 490
LG200L 1 239.5 1 365.5 385.0 301.0 260 192 214.5 2xM50x1.5 540
LG225S 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 616
LG225M 1 310.5 1 549.5 442.0 325.0 260 192 250.5 2xM50x1.5 604
LG225ZM 1 370.5 1 609.5 442.0 325.0 260 192 250.5 2xM50x1.5 662
K4-LGI250M 1 597.5 1 822.5 495.0 392.0 300 236 469.5 2xM63x1.5 784
K4-LGI250ZM 1 667.5 1 892.5 495.0 392.0 300 236 469.5 2xM63x1.5 887

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/187

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K168 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
225 -1 498 HH l 199 199 l
45 LL l3 l4
110
225
155

Ød to1

Ød to1
X
Z B A

ØAC
50
265
375 -1

110

DR
4
115 Ø39 22 Ø39
45

4 110
350
110 265
330 i
Z
AD 400
X
408 u 5

t
204
AG

d to1 l l3 l4 t u i q DR
110 *) m6 210 180 15 116 28 250 415
M24x50
120 m6 210 180 15 127 32 250 415

*) Preferred series

K168 Weight
Motor k kB AC AD AG LL HH O K168
LA132S/M 1 121.5 1 223.5 259.0 195.0 140 140 137.0 2xM32x1.5 511
LA132ZM 1 167.5 1 269.5 259.0 195.0 140 140 245.0 2xM32x1.5 532
LA160M/L 1 221.5 1 340.0 313.5 227.0 165 165 160.0 2xM40x1.5 545
LA160ZL 1 269.5 1 388.0 313.5 227.0 165 165 313.0 2xM40x1.5 584
LG180M/L 1 281.0 1 403.0 348.0 322.5 260 192 177.0 2xM40x1.5 641
LG180ZM/ZL 1 332.0 1 454.0 348.0 322.5 260 192 177.0 2xM40x1.5 671
LG200L 1 337.0 1 463.0 385.0 301.0 260 192 207.0 2xM50x1.5 721
LG225S 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 794
LG225M 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 782
LG225ZM 1 468.0 1 707.0 442.0 325.0 260 192 243.0 2xM50x1.5 840
LG250M 1 501.5 1 726.5 495.0 392.0 300 236 278.5 2xM63x1.5 884
LG250ZM 1 571.5 1 797.0 495.0 392.0 300 236 278.5 2xM63x1.5 987
K4-LGI280S 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 115
K4-LGI280M 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 127
K4-LGI280ZM 1 890.5 2 117.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 215

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/188 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF168 (3-stage), flange-mounted design (A-type)

KF012

kB
k 199 466
220,5 498 HH 210
22°30' Ø17,5 LL 25 5 6

45°
225

180 15

Ø110 m6
Ø450 h6
Ø500 X

Ø550
Z

ØAC
210
50

4
375 -1

DR M24x50
115 M30x48 22 240 4
110 110 324
X
350
Z 28 5
AD
408

116
204
AG

KF168 Weight
Motor k kB AC AD AG LL HH O KF168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 573
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 594
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 607
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 646
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 703
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 733
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 783
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 856
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 845
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 903
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 947
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 1 050
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 180
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 190
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 278

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/189

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA168 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
225 -1 498 HH
45 LL 199 199
110
225
155

Z B A

ØAC
50
265
375 -1

110

4 115 Ø39 Ø39

45
110 110 265
350 330
Z
AD 400
408

5
209 205
t 175 175

u JS9
204

Ød H7
Ø150
AG

M
1 l9
O 366
410
340

Ød h6

4 Rmax 2.5

d l9 M t u
100 *) 72 M24 106.4 28
110 73 M24 116.4 28

*) Preferred series

KA168 Weight
Motor k kB AC AD AG LL HH O KA168
LA132S/M 1 121.5 1 223.5 259.0 195.0 140 140 137.0 2xM32x1.5 483
LA132ZM 1 167.5 1 269.5 259.0 195.0 140 140 245.0 2xM32x1.5 504
LA160M/L 1 221.5 1 340.0 313.5 227.0 165 165 160.0 2xM40x1.5 517
LA160ZL 1 269.5 1 388.0 313.5 227.0 165 165 313.0 2xM40x1.5 556
LG180M/L 1 281.0 1 403.0 348.0 322.5 260 192 177.0 2xM40x1.5 613
LG180ZM/ZL 1 332.0 1 454.0 348.0 322.5 260 192 177.0 2xM40x1.5 643
LG200L 1 337.0 1 463.0 385.0 301.0 260 192 207.0 2xM50x1.5 693
LG225S 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 766
LG225M 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 754
LG225ZM 1 468.0 1 707.0 442.0 325.0 260 192 243.0 2xM50x1.5 712
LG250M 1 501.5 1 726.5 495.0 392.0 300 236 278.5 2xM63x1.5 856
LG250ZM 1 571.5 1 797.0 495.0 392.0 300 236 278.5 2xM63x1.5 959
K4-LGI280S 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 087
K4-LGI280M 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 099
K4-LGI280ZM 1 890.5 2 117.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 187

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885

4/190 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD168 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
220,5 498 HH 199 199
45° M20x34 LL 5 5
225

0
Ø35

Ø300 h6

Ø300 h6
Ø400

Ø400
Z B A

ØAC
7
50
375

60
550

22
4
40

Ø40 H9
5
R6

80
440 88
324
Z
AD
408

5
209 205
u JS9 t 175 175
204

Ød H7
Ø150
AG

M
1 l9
O 366
410
340
Ød h6

4 Rmax 2.5

d l9 M t u
100 *) 72 M24 106.4 28
110 73 M24 116.4 28
*) Preferred series
KAD168 Weight
Motor k kB AC AD AG LL HH O KAD168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 519
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 541
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 553
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 592
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 649
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 679
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 729
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 802
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 791
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 851
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 893
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 996
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 126
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 136
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 224

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/191

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF168 (3-stage), flange-mounted design

KAF012

kB
k
220,5 498 HH 199 256
22°30' Ø17,5 LL 25 5
°
45
225

Ø500

Ø450 h6
Ø550
Z B A

ØAC
50
375 -1

4 115 M30x48 22 240

6

110 110 324

350
Z
AD
408

5
209 205
t 175 175
u JS9
204

Ød H7
Ø150
AG

M
1 l9
366
410
340
O
Ød h6

4 Rmax 2.5

d l9 M t u
100 *) 72 M24 106.4 28
110 73 M24 116.4 28
)
* Preferred series

KAF168 Weight
Motor k kB AC AD AG LL HH O KAF168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 528
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 549
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 562
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 601
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 658
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 688
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 738
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 811
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 800
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 858
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 902
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 1 005
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 135
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 145
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 233

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/192 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ168 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
220,5 498 HH 199 199
45° M20x34 LL 5 5
225

0
Ø35

Ø300 h6
Ø300 h6
Ø400

Ø400
Z B A

ØAC
7
50
375 -1

115
110 110
M30x48 22 240
324
4
350
Z
AD
408

5
209 205
t 175 175

u JS9
204

Ød H7
Ø150
AG

M
1 l9
O 366
410
340
Ød h6

4 Rmax 2.5

d l9 M t u
100 *) 72 M24 106.4 28
110 73 M24 116.4 28
)
* Preferred series

KAZ168 Weight
Motor k kB AC AD AG LL HH O KAZ168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 496
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 517
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 530
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 569
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 625
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 655
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 705
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 778
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 767
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 825
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 869
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 972
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 102
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 112
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 200

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/193

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS168 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
225 -1 498 HH
45 LL 199 199
110
225
155

Ø237
Z B A

ØAC
50
265
375 -1

110

4 115
110 110
Ø39 22 45 Ø39
265
350 330
Z
AD 400
408
291 205
54 70
204

Ø105 H7

Ø105 H7
AG

483
O
59 75

Ø105 h6

Ø105 h6
Rmax 1.0

KAS168 Weight
Motor k kB AC AD AG LL HH O KAS168
LA132S/M 1 121.5 1 223.5 259.0 195.0 140 140 137.0 2xM32x1.5 493
LA132ZM 1 167.5 1 269.5 259.0 195.0 140 140 245.0 2xM32x1.5 515
LA160M/L 1 221.5 1 340.0 313.5 227.0 165 165 160.0 2xM40x1.5 527
LA160ZL 1 269.5 1 388.0 313.5 227.0 165 165 313.0 2xM40x1.5 566
LG180M/L 1 281.0 1 403.0 348.0 322.5 260 192 177.0 2xM40x1.5 623
LG180ZM/ZL 1 332.0 1 454.0 348.0 322.5 260 192 177.0 2xM40x1.5 653
LG200L 1 337.0 1 463.0 385.0 301.0 260 192 207.0 2xM50x1.5 703
LG225S 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 776
LG225M 1 408.0 1 647.0 442.0 325.0 260 192 243.0 2xM50x1.5 764
LG225ZM 1 468.0 1 707.0 442.0 325.0 260 192 243.0 2xM50x1.5 822
LG250M 1 501.5 1 726.5 495.0 392.0 300 236 278.5 2xM63x1.5 866
LG250ZM 1 571.5 1 797.0 495.0 392.0 300 236 278.5 2xM63x1.5 969
K4-LGI280S 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 097
K4-LGI280M 1 780.5 2 007.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 109
K4-LGI280ZM 1 890.5 2 117.5 555.0 432.0 300 236 489.5 2xM63x1.5 1 197

4/194 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS168 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB
k
220,5 498 HH 199 199
45° M20x34 LL 5 5
225

0
Ø35

Ø300 h6

Ø300 h6
Ø400

Ø400
Ø237
Z B A

ØAC
7
50
375

60
550

22
4
40

Ø40 H9
5
R6

80
440 88
324
Z
AD
408
291 205
54 70
204

Ø105 H7

Ø105 H7
AG

483
O
59 75
Ø105 h6

Ø105 h6
Rmax 1.0

KADS168 Weight
Motor k kB AC AD AG LL HH O KADS168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 530
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 551
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 564
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 603
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 659
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 689
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 739
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 812
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 801
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 859
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 903
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 1 006
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 136
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 146
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 234

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/195

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS168 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
220,5 498 HH 199 256
22°30' Ø17,5 LL 25 5
°
45
225

Ø450 h6
Ø500

Ø550
Ø237
Z B A

ØAC
50
375 -1

4 115 M30x48 22 240

6

110 110 324

350
Z
AD
408

291 205
54 70
204

Ø105 H7

Ø105 H7
AG

483
59 75
Ø105 h6

Ø105 h6
O
Rmax 1.0

KAFS168 Weight
Motor k kB AC AD AG LL HH O KAFS168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 538
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 560
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 572
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 611
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 668
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 698
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 748
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 821
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 810
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 868
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 912
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 1 015
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 145
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 155
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 243

➅ For note, see page 4/217

4/196 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS168 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
220,5 498 HH 199 199
45° M20x34 LL 5 5
225

0
Ø35

Ø300 h6

Ø300 h6
Ø400

Ø400
Ø237
Z B A

ØAC
7
50
375 -1

115
110 110
M30x48 22 240
324 4
350
Z
AD
408
291 205
204 54 70

Ø105 H7

Ø105 H7
AG

483
O
59 75
Ø105 h6

Ø105 h6
Rmax 1.0

KAZS168 Weight
Motor k kB AC AD AG LL HH O KAZS168
LA132S/M 1 117.0 1 219.0 259.0 195.0 140 140 137.0 2xM32x1.5 506
LA132ZM 1 163.0 1 265.0 259.0 195.0 140 140 245.0 2xM32x1.5 527
LA160M/L 1 217.0 1 335.5 313.5 227.0 165 165 160.0 2xM40x1.5 540
LA160ZL 1 265.0 1 383.5 313.5 227.0 165 165 313.0 2xM40x1.5 579
LG180M/L 1 276.5 1 398.5 348.0 322.5 260 192 177.0 2xM40x1.5 636
LG180ZM/ZL 1 327.5 1 449.5 348.0 322.5 260 192 177.0 2xM40x1.5 666
LG200L 1 332.5 1 458.5 385.0 301.0 260 192 207.0 2xM50x1.5 716
LG225S 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 789
LG225M 1 403.5 1 642.5 442.0 325.0 260 192 243.0 2xM50x1.5 778
LG225ZM 1 463.5 1 702.5 442.0 325.0 260 192 243.0 2xM50x1.5 836
LG250M 1 497.0 1 722.0 495.0 392.0 300 236 278.5 2xM63x1.5 880
LG250ZM 1 567.0 1 792.5 495.0 392.0 300 236 278.5 2xM63x1.5 983
K4-LGI280S 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 113
K4-LGI280M 1 776.0 2 003.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 123
K4-LGI280ZM 1 886.0 2 113.0 555.0 432.0 300 236 489.5 2xM63x1.5 1 211

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/197

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox K188 (3-stage), housing-flange-mounted design (C-type)

K012

kB
k q q
280 -1 536 HH l 241 241 l
50 LL l3 l4
130
255,5
180

Ød to1

Ød to1
Z B A

ØAC
68,5
320
450 -1

130

DR
4
140 Ø39 Ø39
50

4 130
380
130 340
420 i
Z
AD 500 X
450 u 5

t
225
AG

d to1 l l3 l4 t u i q DR
120 *) m6 210 180 15 127 32 250 460
M24x50
140 m6 250 220 10 148 36 290 500

*) Preferred series

K188 Weight
Motor k kB AC AD AG LL HH O K188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 777
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 799
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 811
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 850
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 907
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 937
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 987
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 059
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 047
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 105
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 149
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 252
K4-LGI280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 278
K4-LGI280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 384
K4-LGI280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 472
K2-LGI315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 513
K2-LGI315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 668
K2-LGI315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 808
K2-LGI315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 2 008

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/198 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KF188 (3-stage), flange-mounted design (A-type)

KF012

kB
k 241 520
280 -1 536 HH 210
LL 28 6 6
22.5° Ø22
°
45

180 15
255,5

Ø120 m6
Ø550 h6
Ø600 X

Ø660
Z

ØAC
68,5

210
450 -1

4
DR M24x50
140 Ø39 Ø39
50

4
130 130 340
380 420
Z
AD 500
450
X
32 5

127
225
AG

KF188 Weight
Motor k kB AC AD AG LL HH O KF188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 832
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 853
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 866
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 905
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 961
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 991
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 1 041
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 113
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 101
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 159
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 203
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 306
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 332
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 438
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 526
K2-LGI315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 567
K2-LGI315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 722
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 862
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 2 062

➃ DIN 332 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

Siemens D 87.1 · 2011 4/199

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KA188 (3-stage), housing-flange-mounted design (C-type)

KA012

kB
k
280 -1 536 HH 241 241
50 M24x32 LL 5 5
130
255,5
180

Ø300 h6

Ø300 h6
B A

Ø400

Ø400
0 Z
Ø35

ØAC
68,5
320
450 -1

45°
130

4 140 Ø39 Ø39

50

130 130 340

380 420
Z
AD 500
450

5
257 250
127,4 220 220

32 JS9
225

Ø160
AG

M24

Ø120 H7
1 71
O 460
500
430
Ø120 h6

Rmax 2.5
4

KA188 Weight
Motor k kB AC AD AG LL HH O KA188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 674
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 695
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 707
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 746
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 803
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 833
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 883
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 955
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 943
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 001
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 045
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 148
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 174
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 280
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 368
K2-LGI315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 409
K2-LGI315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 564
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 704
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 904

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885

4/200 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAD188 (3-stage), shaft-mounted design with torque arm

KAD012

kB
k
280 -1 536 HH 241 241
45° M24x32 LL 5 5
255,5

Ø300 h6

Ø300 h6
Ø35 B A

Ø400
Ø400
Z

ØAC
68,5

7
450 -1

50
700

4
50

05
R1 Z
Ø70 H9 AD 109
510 450 133,5 111
500
225

257 250
AG

5
32 JS9 127,4 220 220

Ø160
M24

Ø120 H7
1 71
460
500
Ø120 h6 430

Rmax 2.5
4

KAD188 Weight
Motor k kB AC AD AG LL HH O KAD188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 697
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 718
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 731
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 770
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 826
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 856
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 906
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 978
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 966
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 024
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 068
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 171
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 197
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 303
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 391
K2-LGI315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 432
K2-LGI315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 587
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 727
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 927

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/201

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAF188 (3-stage), flange-mounted design

KAF012

kB
k
280 -1 536 HH 241 310
22.5° Ø22 LL 28 6
°
45
255,5

Ø550 h6
Ø600

Ø660
Z B A

ØAC
68,5
450 -1

4 140 Ø39 Ø39

6
50

130 130 340

380 420
Z
AD 500
450

5
257 250
127,4 220 220
225

32 JS9
AG

Ø160
Ø120 H7
M24
1 71
460
500
O 430
Ø120 h6

Rmax 2.5
4

KAF188 Weight
Motor k kB AC AD AG LL HH O KAF188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 706
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 727
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 740
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 779
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 835
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 865
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 915
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 987
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 975
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 033
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 077
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 180
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 206
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 312
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 400
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 441
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 596
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 736
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 936

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➅ For note, see page 4/217

4/202 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZ188 (3-stage), shaft-mounted design with housing flange (C-type)

KAZ012

kB
k
280 -1 536 HH 241 241
45° M24x32 LL 5 5
130
255,5
180

Ø300 h6
Ø35

Ø300 h6
B A

Ø400

Ø400
Z

ØAC
7
68,5
320
450 -1

130

50 140 Ø39 Ø39 4

50

130 130 340

380 280
Z
AD 500
450

5 257 250
127,4 220 220

32 JS9
225
AG

Ø160
Ø120 H7
M24
1 71
O 460
500
430
Ø120 h6

Rmax 2.5
4

KAZ188 Weight
Motor k kB AC AD AG LL HH O KAZ188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 674
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 695
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 707
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 746
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 803
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 833
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 883
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 954
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 943
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 001
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 045
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 148
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 174
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 280
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 368
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 409
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 564
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 704
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 904

➃ DIN 332 ➀ DIN EN ISO 4014 ➄ Feather key / keyway DIN 6885 ➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/203

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAS188 (3-stage), shaft-mounted design with shrink disk

KAS012

kB
k
280 -1 536 HH 241 241
50 LL 5 5
130
255,5
180

B A

Ø309
Z

ØAC
68,5
320
450 -1

130

4 140
130 130
Ø39 50 Ø39
340
380 420
Z
AD 500
450
365,5 250
62 80
225

Ø125H7
Ø125H7
AG

O 580
67 85
Ø125 h6

Ø125 h6
R max 1.0

KAS188 Weight
Motor k kB AC AD AG LL HH O KAS188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 684
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 705
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 718
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 757
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 813
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 843
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 893
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 965
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 953
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 011
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 055
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 158
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 184
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 290
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 378
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 419
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 574
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 714
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 914

4/204 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KADS188 (3-stage), shaft-mounted design with torque arm and shrink disk
KADS012

kB 241 241
k 420
280 -1 536 HH 5 340 5
45° M24x32 LL
130
255,5
180

Ø300 h6
B A

Ø309

Ø400
0 Z
Ø35

ØAC
68,5

7
320
450

50
130
700

Ø39
50 50
4
R 105
Ø70 H9 109
510 Z 133,5 111
AD
450 500
365,5 250
62 80
225

Ø125 H7
Ø125 H7
AG

O 580
67 85
Ø125 h6

Ø125 h6
R max 1.0

KADS188 Weight
Motor k kB AC AD AG LL HH O KADS188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 708
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 729
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 741
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 780
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 837
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 867
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 917
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 989
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 977
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 035
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 079
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 182
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 208
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 314
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 402
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 443
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 598
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 738
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 938

➆ For note, see page 4/218

Siemens D 87.1 · 2011 4/205

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAFS188 (3-stage), flange-mounted design and shrink disk

KAFS012

kB
k
280 -1 536 HH 241 310
22,5° Ø22 LL 28 6
°
45
255,5

Ø550 h6
Ø600

Ø660
A

Ø309
Z B

ØAC
68,5
450 -1

4 140 Ø39 Ø39

6
50

130 130 340

380 420
Z
AD 500
450
365,5 250
62 80
225

Ø125 H7

Ø125 H7
AG

580
67 85
O
Ø125 h6

Ø125 h6
R max 1.0

KAFS188 Weight
Motor k kB AC AD AG LL HH O KAFS188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 716
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 737
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 750
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 789
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 845
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 875
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 925
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 997
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 985
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 043
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 087
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 190
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 216
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 322
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 410
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 451
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 606
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 746
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 946

➅ For note, see page 4/217

4/206 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Gearbox KAZS188 (3-stage), shaft-mounted design with housing flange (C-type) and shrink disk
KAZS012

kB
k
280 -1 536 HH 241 241
45° M24x32 LL 5 5
130
255,5
180

Ø300 h6
A

Ø263

Ø400
0 Z B
Ø35

ØAC
7
68,5
320
450 -1

130

50 140 Ø39 Ø39

4
50

130 130 340

380 420
Z
AD 500
450
365,5 250
62 80
225

Ø125H7
Ø125H7
AG

O 580
67 85
Ø125 h6

Ø125 h6
R max 1.0

KAZS188 Weight
Motor k kB AC AD AG LL HH O KAZS188
LA132S/M 1 200.0 1 302.0 259.0 195.0 140 140 122.5 2xM32x1.5 684
LA132ZM 1 246.0 1 348.0 259.0 195.0 140 140 230.5 2xM32x1.5 705
LA160M/L 1 300.0 1 418.5 313.5 227.0 165 165 145.5 2xM40x1.5 718
LA160ZL 1 348.0 1 466.5 313.5 227.0 165 165 298.5 2xM40x1.5 757
LG180M/L 1 359.5 1 481.5 348.0 322.5 260 192 162.5 2xM40x1.5 813
LG180ZM/ZL 1 410.5 1 532.5 348.0 322.5 260 192 162.5 2xM40x1.5 843
LG200L 1 415.5 1 541.5 385.0 301.0 260 192 192.5 2xM50x1.5 893
LG225S 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 965
LG225M 1 486.5 1 725.5 442.0 325.0 260 192 228.5 2xM50x1.5 953
LG225ZM 1 546.5 1 785.5 442.0 325.0 260 192 228.5 2xM50x1.5 1 011
LG250M 1 580.0 1 805.0 495.0 392.0 300 236 264.0 2xM63x1.5 1 055
LG250ZM 1 650.0 1 875.5 495.0 392.0 300 236 264.0 2xM63x1.5 1 158
K4-LG280S 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 184
K4-LG280M 1 859.5 2 086.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 290
K4-LG280ZM 1 969.5 2 196.5 555.0 432.0 300 236 475.5 2xM63x1.5 1 378
K4-LG315S/M 2 047.5 2 312.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 419
K4-LG315ZM 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 574
K4-LG315L 2 207.5 2 472.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 714
K4-LG315ZL 2 347.5 2 612.5 610.0 500.0 380 307 584.5 2xM63x1.5 1 914

➅ For note, see page 4/218

Siemens D 87.1 · 2011 4/207

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Offset hollow shafts with shrink disk

Optional hollow shafts for bevel helical gearboxes with shrink disk
KA.S

Gearbox d d1 l m4 m5 m6 m7 q1 q g7 h
KAS/KAFS38 30 31 146 22 20 27 25 94 60 77 100
KAS/KAFS48 40 41 177 25 20 30 25 109 75 93 112
KAS/KAFS68 40 42 209 35 20 37 25 126 90 112 140
50 51 209 27 20 32 25 126 90 112 140
KAS/KAFS88 50 52 241 29 30 34 35 144 105 132 180
60 61 241 29 30 34 35 144 105 132 180
KAS/KAFS108 65 66 280 30 40 35 45 168 120 144 212
70 71 280 30 40 35 45 168 120 144 212
KAS/KAFS128 75 76 345 44 50 49 55 207 150 180 265
80 81 345 40 50 45 55 207 150 180 265
KAS/KAFS148 95 96 404 49 60 54 65 243 175 210 315
KAS/KAFS168 105 106 483 54 70 59 75 291 205 237 375
KAS/KAFS188 125 126 580 62 80 67 85 342 250 263 450

4/208 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Shaft-mounted design with splined shaft in acc. with DIN 5480

Gearbox d l d9 min. l11 W D R m8 m9

BA.T38 30 140 45 115 W30x1.25x30x22 8f M10 R3 20.0 30
KA.T38 35 120 45 95 W35x1.25x30x26 8f M10 R2 17.0 27
KA.T48 40 150 52 120 W40x2x30x18 8f M12 R3 22.0 34
KA.T68 55 180 65 142 W50x2x30x24 8f M16 R2 21.0 40
KA.T88 65 210 80 172 W60x2x30x28 8f M16 R2 22.5 49
KA.T108 72 240 85 201 W70x2x30x34 8f M20 R2 22.5 56
KA.T128 90 300 105 257 W80x3x30x25 8f M20 R2 24.0 71
KA.T148 90 350 110 306 W90x3x30x28 8f M20 R3 25.0 88
KA.T168 110 410 130 350 W110x3x30x35 8f M24 R3 32.0 99
KA.T188 135 500 145 445 W130x5x30x24 8f M24 R4 42.0 120

Gearbox N m5 l8 l9 M DM Me tol
BA.T38 N30x1.25x30x22 9H 12.0 18 27.0 M10x35 2.75 33.015 -0.056
KA.T38 N35x1.25x30x26 9H 12.0 18 27.0 M10x35 2.50 37.423 -0.041
KA.T48 N40x2x30x18 9H 14.0 20 37.0 M12x45 4.50 45.083 -0.043
KA.T68 N50x2x30x24 9H 16.0 23 49.5 M16x55 4.00 54.156 -0.049
KA.T88 N60x2x30x28 9H 16.5 26 46.5 M16x55 4.00 63.918 -0.053
KA.T108 N70x2x30x34 9H 16.5 28 51.0 M20x60 4.00 74.181 -0.057
KA.T128 N80x3x30x25 9H 17.0 31 46.0 M20x60 6.00 85.856 -0.053
KA.T148 N90x3x30x28 9H 17.0 31 51.0 M20x60 6.00 95.911 -0.053
KA.T168 N110x3x30x35 9H 20.0 41 65.5 M24x80 6.00 115.998 -0.061
KA.T188 N130x5x30x24 9H 20.0 50 35.5 M24x60 10.00 139.848 -0.061

➀ DIN 912 ➁ DIN 5480 ➂ DIN 332-D

Siemens D 87.1 · 2011 4/209

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Bevel helical tandem gearbox

zB5
z5
LB

ØAC
4
Gearbox Motor AC z5 zB5 LB Gearbox Motor AC z5 zB5 LB
K.38-Z28 LA71 139.0 363.0 418.0 202.5 K.68-D28 LA71 139.0 357.5 412.5 202.5
LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 376.5 431.5 221.5
LA80 156.5 465.0 528.5 304.5 LA80 156.5 459.5 523.0 304.5
LA80Z 156.5 487.5 551.0 327.0 LA80Z 156.5 482.0 545.5 327.0
LA90S/L 174.0 460.0 531.0 299.5 LA90S/L 174.0 454.5 525.5 299.5
LA90ZL 174.0 505.0 576.0 344.5 LA90ZL 174.0 499.5 570.5 344.5
LA100L 195.0 542.0 623.0 381.5 K.88-Z28 LA71 139.0 351.5 406.5 202.5
LA100ZL 195.0 612.0 693.0 451.5 LA71Z 139.0 370.5 425.5 221.5
K.38-D28 LA71 139.0 363.0 418.0 202.5 LA80 156.5 453.5 517.0 304.5
LA71Z 139.0 382.0 437.0 221.5 LA80Z 156.5 476.0 539.5 327.0
LA80 156.5 465.0 528.5 304.5 LA90S/L 174.0 448.5 519.5 299.5
LA80Z 156.5 487.5 551.0 327.0 LA90ZL 174.0 493.5 564.5 344.5
LA90S/L 174.0 460.0 531.0 299.5 LA100L 195.0 530.5 611.5 381.5
LA90ZL 174.0 505.0 576.0 344.5 LA100ZL 195.0 600.5 681.5 451.5
K.48-Z28 LA71 139.0 363.0 418.0 202.5 K.88-D28 LA71 139.0 351.5 406.5 202.5
LA71Z 139.0 382.0 437.0 221.5 LA71Z 139.0 370.5 425.5 221.5
LA80 156.5 465.0 528.5 304.5 LA80 156.5 453.5 517.0 304.5
LA80Z 156.5 487.5 551.0 327.0 LA80Z 156.5 476.0 539.5 327.0
LA90S/L 174.0 460.0 531.0 299.5 LA90S/L 174.0 448.5 519.5 299.5
LA90ZL 174.0 505.0 576.0 344.5 LA90ZL 174.0 493.5 564.5 344.5
LA100L 195.0 542.0 623.0 381.5 K.108-Z38 LA71 139.0 465.5 520.5 258.5
LA100ZL 195.0 612.0 693.0 451.5 LA71Z 139.0 484.5 539.5 277.5
K.48-D28 LA71 139.0 363.0 418.0 202.5 LA80 156.5 502.5 566.0 295.5
LA71Z 139.0 382.0 437.0 221.5 LA80Z 156.5 525.0 588.5 318.0
LA80 156.5 465.0 528.5 304.5 LA90S 174.0 533.5 604.5 326.5
LA80Z 156.5 487.5 551.0 327.0 LA90L 174.0 533.5 604.5 326.5
LA90S/L 174.0 460.0 531.0 299.5 LA90ZL 174.0 578.5 649.5 371.5
LA90ZL 174.0 505.0 576.0 344.5 LA100L 195.0 579.5 660.5 372.5
K.68-Z28 LA71 139.0 357.5 412.5 202.5 LA100ZL 195.0 649.5 730.5 442.5
LA71Z 139.0 376.5 431.5 221.5 LA112M 219.0 609.0 690.0 402.0
LA80 156.5 459.5 523.0 304.5 LA112ZM 219.0 637.0 718.0 430.0
LA80Z 156.5 482.0 545.5 327.0 K.108-D38 LA71 139.0 480.5 535.5 273.5
LA90S/L 174.0 454.5 525.5 299.5 LA71Z 139.0 499.5 554.5 292.5
LA90ZL 174.0 499.5 570.5 344.5 LA80 156.5 517.5 581.0 310.5
LA100L 195.0 536.5 617.5 381.5 LA80Z 156.5 540.0 603.5 333.0
LA100ZL 195.0 606.5 687.5 451.5 LA90S/L 174.0 548.5 619.5 341.5
LA90ZL 174.0 593.5 664.5 386.5

4/210 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Bevel helical tandem gearbox (continued)

zB5
z5
LB

ØAC
4
Gearbox Motor AC z5 zB5 LB Gearbox Motor AC z5 zB5 LB
K.108-Z48 LA71 139.0 544.5 599.5 253.0 K.128-Z48 LA112M 219.0 675.0 756.0 396.0
LA71Z 139.0 563.5 618.5 272.0 LA112ZM 219.0 703.0 784.0 424.0
LA80 156.5 581.5 645.0 290.0 LA132S/M 259.0 737.0 839.0 458.0
LA80Z 156.5 604.0 667.5 312.5 LA132ZM 259.0 783.0 885.0 504.0
LA90S/L 174.0 612.5 683.5 321.0 K.148-Z38 LA71 139.0 454.0 509.0 258.5
LA90ZL 174.0 657.5 728.5 366.0 LA71Z 139.0 473.0 528.0 277.5
LA100L 195.0 658.5 739.5 367.0 LA80 156.5 491.0 554.5 295.5
LA100ZL 195.0 728.5 809.5 437.0 LA80Z 156.5 513.5 577.0 318.0
LA112M 219.0 687.5 768.5 396.0 LA90S/L 174.0 522.0 593.0 326.5
LA112ZM 219.0 715.5 796.5 424.0 LA90ZL 174.0 567.0 638.0 371.5
LA132S/M 259.0 749.5 851.5 458.0 LA100L 195.0 568.0 649.0 372.5
LA132ZM 259.0 795.5 897.5 504.0 LA100ZL 195.0 638.0 719.0 442.5
K.128-Z38 LA71 139.0 458.5 513.5 258.5 LA112M 219.0 597.5 678.5 402.0
LA71Z 139.0 477.5 532.5 277.5 LA112ZM 219.0 625.5 706.5 430.0
LA80 156.5 495.5 559.0 295.5 K.148-D38 LA71 139.0 469.0 524.0 273.5
LA80Z 156.5 518.0 581.5 318.0 LA71Z 139.0 488.0 543.0 292.5
LA90S/L 174.0 526.5 597.5 326.5 LA80 156.5 506.0 569.5 310.5
LA90ZL 174.0 571.5 642.5 371.5 LA80Z 156.5 528.5 592.0 333.0
LA100L 195.0 572.5 653.5 372.5 LA90S/L 174.0 537.0 608.0 341.5
LA100ZL 195.0 642.5 723.5 442.5 LA90ZL 174.0 582.0 653.0 386.5
LA112M 219.0 602.0 683.0 402.0 K.148-Z68 LA71 139.0 590.5 645.5 247.0
LA112ZM 219.0 630.0 711.0 430.0 LA71Z 139.0 609.5 664.5 266.0
K.128-D38 LA71 139.0 473.5 528.5 273.5 LA80 156.5 627.5 691.0 284.0
LA71Z 139.0 492.5 547.5 292.5 LA80Z 156.5 650.0 713.5 306.5
LA80 156.5 510.5 574.0 310.5 LA90S/L 174.0 658.5 729.5 315.0
LA80Z 156.5 533.0 596.5 333.0 LA90ZL 174.0 703.5 774.5 360.0
LA90S/L 174.0 541.5 612.5 341.5 LA100L 195.0 704.5 785.5 361.0
LA90ZL 174.0 586.5 657.5 386.5 LA100ZL 195.0 774.5 855.5 431.0
K.128-Z48 LA71 139.0 532.0 587.0 253.0 LA112M 219.0 731.5 812.5 388.0
LA71Z 139.0 551.0 606.0 272.0 LA112ZM 219.0 759.5 840.5 416.0
LA80 156.5 569.0 632.5 290.0 LA132S/M 259.0 791.5 893.5 448.0
LA80Z 156.5 591.5 655.0 312.5 LA132ZM 259.0 837.5 939.5 494.0
LA90S/L 174.0 600.0 671.0 321.0 LA160M/L 313.5 894.0 1 012.5 550.5
LA90ZL 174.0 645.0 716.0 366.0 LA160ZL 313.5 942.0 1 060.5 598.5
LA100L 195.0 646.0 727.0 367.0
LA100ZL 195.0 716.0 797.0 437.0

Siemens D 87.1 · 2011 4/211

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Bevel helical tandem gearbox (continued)

zB5
z5
LB

ØAC
4
Gearbox Motor AC z5 zB5 LB Gearbox Motor AC z5 zB5 LB
K.168-Z48 LA71 139.0 513.5 568.5 253.0 K.188-Z68 LA71 139.0 568.5 623.5 247.0
LA71Z 139.0 532.5 587.5 272.0 LA71Z 139.0 587.5 642.5 266.0
LA80 156.5 550.5 614.0 290.0 LA80 156.5 605.5 669.0 284.0
LA80Z 156.5 573.0 636.5 312.5 LA80Z 156.5 628.0 691.5 306.5
LA90S/L 174.0 581.5 652.5 321.0 LA90S/L 174.0 636.5 707.5 315.0
LA90ZL 174.0 626.5 697.5 366.0 LA90ZL 174.0 681.5 752.5 360.0
LA100L 195.0 627.5 708.5 367.0 LA100L 195.0 682.5 763.5 361.0
LA100ZL 195.0 697.5 778.5 437.0 LA100ZL 195.0 752.5 833.5 431.0
LA112M 219.0 656.5 737.5 396.0 LA112M 219.0 709.5 790.5 388.0
LA112ZM 219.0 684.5 765.5 424.0 LA112ZM 219.0 737.5 818.5 416.0
LA132S/M 259.0 718.5 820.5 458.0 LA132S/M 259.0 769.5 871.5 448.0
LA132ZM 259.0 764.5 866.5 504.0 LA132ZM 259.0 815.5 917.5 494.0
K.168-D48 LA71 139.0 530.5 585.5 270.0 LA160M/L 313.5 872.0 990.5 550.5
LA71Z 139.0 549.5 604.5 289.0 LA160ZL 313.5 920.0 1 038.5 598.5
LA80 156.5 567.5 631.0 307.0 K.188-D68 LA71 139.0 587.0 642.0 265.5
LA80Z 156.5 590.0 653.5 329.5 LA71Z 139.0 606.0 661.0 284.5
LA90S/L 174.0 598.5 669.5 338.0 LA80 156.5 624.0 687.5 302.5
LA90ZL 174.0 643.5 714.5 383.0 LA80Z 156.5 646.5 710.0 325.0
LA100L 195.0 644.5 725.5 384.0 LA90S/L 174.0 655.0 726.0 333.5
LA100ZL 195.0 714.5 795.5 454.0 LA90ZL 174.0 700.0 771.0 378.5
K.168-Z68 LA71 139.0 599.5 654.5 247.0 LA100L 195.0 701.0 782.0 379.5
LA71Z 139.0 618.5 673.5 266.0 LA100ZL 195.0 771.0 852.0 449.5
LA80 156.5 636.5 700.0 284.0 K.188-Z88 LA90S/L 174.0 776.5 847.5 300.0
LA80Z 156.5 659.0 722.5 306.5 LA90ZL 174.0 821.5 892.5 345.0
LA90S 174.0 667.5 738.5 315.0 LA100L 195.0 820.0 901.0 343.5
LA90L 174.0 667.5 738.5 315.0 LA100ZL 195.0 890.0 971.0 413.5
LA90ZL 174.0 712.5 783.5 360.0 LA112M 219.0 846.0 927.0 369.5
LA100L 195.0 713.5 794.5 361.0 LA112ZM 219.0 874.0 955.0 397.5
LA100ZL 195.0 783.5 864.5 431.0 LA132S/M 259.0 906.0 1 008.0 429.5
LA132S 259.0 800.5 902.5 448.0 LA132ZM 259.0 952.0 1 054.0 475.5
LA132M 259.0 800.5 902.5 448.0 LA160M/L 313.5 1 010.5 1 129.0 534.0
LA132ZM 259.0 846.5 948.5 494.0 LA160ZL 313.5 1 058.5 1 177.0 582.0
LA160M 313.5 903.0 1 021.5 550.5 LG180M/L 348.0 1 070.0 1 192.0 593.5
LA160L 313.5 903.0 1 021.5 550.5 LG180ZM/ZL 348.0 1 121.0 1 243.0 644.5
LA160ZL 313.5 951.0 1 069.5 598.5

4/212 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Flange design for mixers

a1 ≥ 450

Gearbox a1 b1 to2 c1 e1 f1 s1 o3 q3 i2
KM88 300 230 j6 20 265 4 13.5 120 216.5 140
KM108 350 250 h6 20 300 5 17.5 135 246.0 170
KM128 450 350 h6 25 400 5 17.5 165 306.0 170
KM148 450 350 h6 25 400 5 17.5 185 349.0 210
KM168 550 450 h6 28 500 5 17.5 210 404.0 210

Gearbox d to1 l l3 l4 t u DR Weight

KM88 70 m6 140 110 15 74.5 20 M20x42 84
KM108 80 m6 170 125 20 85.0 22 M20x42 150
KM128 90 m6 170 140 15 95.0 25 M24x50 248
KM148 100 m6 210 180 15 106.0 28 M24x50 357
KM168 120 m6 210 180 15 127.0 32 M24x50 584

➃ DIN 332 ➄ Feather key / keyway DIN 6885

Siemens D 87.1 · 2011 4/213

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Flange design for mixers

4
a1 ≥ 450

Gearbox a1 b1 to2 c1 e1 f1 s1 o3 q3 o9
KAM88 300 230 j6 20 265 4 13.5 120 216.5 324.0
KAM108 350 250 h6 20 300 5 17.5 135 246.0 369.5
KAM128 450 350 h6 25 400 5 17.5 165 306.0 458.0
KAM148 450 350 h6 25 400 5 17.5 185 349.0 526.0
KAM168 550 450 h6 28 500 5 17.5 210 404.0 611.0

Gearbox d d7 l m4 l8 l9 l11 t u M Weight

KAM88 60 80 321 78 291 54.0 275 64.4 18 M20 76
KAM108 70 95 366 93 334 63.5 310 74.9 20 M20 137
KAM128 80 110 456 123 419 63.5 395 85.4 22 M20 228
KAM148 90 120 524 148 484 72.0 460 95.4 25 M24 329
KAM168 110 150 609 175 565 73.0 540 116.4 28 M24 539

➃ DIN 332 ➄ Feather key / keyway DIN 6885

4/214 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Flange design for extruder drives

a1 ≤ 310

4
d10 ≤ 160

Gearbox a1 b1 e1 f1 s1 q1 i2 q3
KAE68 260 220 +0.046 / 0 236 10 M12x17 147.5 15.0 230.0
KAE88 310 255 +0.052 / 0 280 10 M16x22 171.0 15.5 267.5
KAE108 360 305 +0.052 / 0 330 10 M16x22 188.0 23.0 229.0
KAE128 420 345 +0.057 / 0 380 10 M20x27 206.0 25.0 347.0
KAE148 450 360 +0.057 / 0 400 10 M24x32 225.0 27.0 389.0
KAE168 510 420 +0.063 / 0 460 15 M24x32 262.0 38.0 456.0

Siemens D 87.1 · 2011 4/215

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Flange design for extruder drives (continued)

Gearbox d l11 d7 d8 l9 s11 o9 d10 m6 e10
l d12
KAE68 20 48 65 38 30 M42x2 349.0 105 14 88
25
30 305.0 104
KAE88 30 58 80 49 39 M56x2 410.5 130 23 110
35
40 357.0 129
KAE108 40 71 95 60 39 M64x2 462.0 160 25 130
45
50 396.0 156
KAE128 45 87 110 71 49 M80x3 554.0 175 31 150

4 50
60 472.0 174
KAE148 60 95 120 88 52 M95x3 626.0 190 33 160
70
75 537.0 189
KAE168 70 105 150 104 57 M110x3 722.0 230 42 195
80
90 623.0 229

Gearbox d d9 s9 m7 d11 m5 l8 M t u

KAE68 20 48 +0.025 / 0 11 11 65 4.0 20.0 M10x25 22.8 6

25 28.3 8
30 33.3 8
KAE88 30 63 +0.030 / 0 17 12 80 4.5 23.5 M12x35 33.3 8
35 38.3 10
40 43.3 12
KAE108 40 78 +0.030 / 0 17 14 95 5.0 31.0 M16x40 43.3 12
45 48.8 14
50 53.8 14
KAE128 45 88 +0.035 / 0 22 17 110 5.0 42.0 M16x45 48.8 14
50 53.8 14
60 64.4 18
KAE148 60 105 +0.035 / 0 22 20 120 6.0 45.0 M16x55 64.4 18
70 74.9 20
75 79.9 20
KAE168 70 125 +0.040 / 0 25 22 150 6.0 49.0 M20x55 74.9 20
80 85.4 22
90 95.4 25

4/216 Siemens D 87.1 · 2011

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Inside contour of the flange-mounted design (A-type)

Design notes for the customer's interface, e.g. plug-in shaft for hollow shaft design.

Gearbox a1 d1 d2 l1
B.F.28 120 70 72 24.0
B.F.28 160 70 103 8.5
B.F.38 160 95 98 27.0
B.F.38 200 84 90 22.5
K.F.38 160 70 77 20.0
K.F.48 200 84 90 22.5
K.F.68 250 96 96 –
K.F.88 300 126 138 31.0
K.F.108 350 176 185 32.0
K.F.128 450 226 234 38.5
K.F.148 450 246 262 34.0
K.F.168 550 296 313 39.0
K.F.188 660 296 296 –

Siemens D 87.1 · 2011 4/217

 © Siemens AG 2011

MOTOX Geared Motors

Bevel helical geared motors
Dimensions

■ Pin holes
In the case of sizes K.Z.108 - 188, the customer's interface can If an additional fuse, e. g. for high shock loads, is required, the
be pinned on the housing flange (C-type). existing pin holes can be used.
The output flanges have been designed to ensure the reliable The gearbox and the machine can be drilled and pinned
transmission of the permissible torques and radial forces by the together. To do so, the provided dimensions must be observed.
bolt connections.

K.Z.108 K.Z.128

K.Z.148 K.Z.168, K.Z.188

Spring pins, heavy-duty design, to DIN 1481: Use pin holes provided in the housing flange.
Grooved cylindrical pins with chamfer to DIN EN 28740/ISO 8740: Drill connecting component together with housing.

4/218 Siemens D 87.1 · 2011