FCS FLUORO CARBON SEALS PVT LTD

(an ISO 9001:2015 Certified Company)

O-RINGS

www.fluorocarbonseals.com
 INTRODUCTION

FCS Fluoro Carbon Seals Pvt Ltd was established in the year 1996 certified with ISO
9001:2015,started manufacturing components of PTFE (TEFLON) material. Now FCS has widely
developed a Standard Technologies for Sealing Solutions to deliver our outcomes globally to more
than 25 countries.

FCS being a trusted manufacturers of quality components for Sealing Solutions since 1996, we are
dealing with many industries like hydraulic and pneumatic seals, Pumps and Valves, Oil and Gas,
Food and Pharmaceutical Industries, Defence, Aerospace and Automotive industries and to serve
our customers’ demands worldwide with the capabilities of manufacturing components of PTFE
(TEFLON), TFM, PEEK (VICTREX), PCTFE, PFA, VESPEL, POLYAMIDES, POLYACETAL(POM), TPU,
TPEE, NBR, HNBR, FKM , FFKM and other Engineering polymers.

FCS had achieved many developments to face the required trends in this field with a complete
infrastructure of Technological sources. The manufacturing stage of Design and Production takes
place within the well equipped system of the industry. We are an innovative manufacturer as it is
proven by our consistent search for solutions to enhance our lines and the highly qualified
materials used. Our only goal is to provide customers’ satisfaction with our high quality products
encircled by a high level of customer service during pre and post sales.
 CONTENT

INTRODUCTION 1

MATERIAL AND SEAL SELECTION METHOD 2

O RING 3

BACK-UP RING INTRODUCTION 12

BACK-UP RING MATERIAL 13

BACK-UP RING SEAL SELECTION METHOD 14

SOLID BACK-UP RING 15

ANGLE CUT BACK-UP RING 19

SPIRAL BACK-UP RING 24

CONCAVE BACK-UP RING 30

CERTIFICATE 31
 INTRODUCTION

O-Ring

In Fluid Control System, Power is transmitted and controlled

through a fluid (Liquid or Gas) under pressure within an
enclosed circuit. To avoid leakage or to seal different
chambers of a component from each other, sealing devices
are used. O-Ring are one type of sealing device.

The O-ring are moulded from wide ranges of polymeric

materials for standard and special applications. Standard
material like NBR, HNBR, EPDM, FKM, FFKM, SILICONE (MVQ),
FVMQ, TFE (AFLAS), TPE, TPU, PTFE, PEEK, UHMWPE and
other engineering polymers customised based on applications.

O-Rings are made to available as per the Standards - ISO

3601, AS568D and customised size are available on request.

O-Ring are used in the field of Automotive,

Aerospace, Construction, Mining, Railways, Semiconductor,
Power Plant, Solar and Wind Power, Food and Beverages,
Engineering, Medical, Hydraulic and Pneumatic Systems, Oil
and Gas, Pharmaceuticals. Ød1

Description of O-Ring

v The O-ring are defined by the inner diameter (d1) and

Cr0ss Section (d2).

Advantages

v The O-Ring has a wide range of advantages by comparing

Ød2
other seals.
v They are all suitable for both sing acting application as
well as double acting application.
v This O-ring are simple in design but it is suitable to with Surface Roughness
stand higher pressure and high temperature.
v O-Ring is suitable for most of the chemical synthesise. The surface roughness of the O-Ring housing and any
mating part has a significant impact on the life and
Approvals sealing performance of the O-Ring.
The FCS Fluoro Carbon Seals O-Ring are approved to NORSOK
certificates for Rapid Gas Decompression (RGD) - Anti Visual surface imperfections are not allowed on
Explosion (AE). surfaces Housing Bore, Static and Dynamic mating
surface.
FCS O-Rings for FDA approved grades are available.

Housing Housing bore or Static Mating Dynamic

d2 Side Surface
Radius Housing Groove Surface Mating Surface

1.78 +0.4
2.62 +0.2

3.53 +0.8 Ra 1.6 Ra 1.6 Ra 1.6 Ra 0.4

+0.4 Rz 6.3 Rz 6.3 Rz 6.3 Rz 1.6
5.33

+1.2
6.99
+0.8

Surface Roughness Table

1 www.fluorocarbonseals.com
MATERIAL AND SEAL SELECTION
METHOD

Material Description Typical Applications Temperature Shore

Code Range ºC [ºF] Hardness

FCE001 FKM -30 to 230 Shore A

[-22 to +446] 80-95

FCE002 FFKM -5 to 300 Shore A

[23 to +572] 80-95

FCE003 NBR -22 to100 Shore A

[-13 to +212] 80-95

FCE004 HNBR -25 to 150 Shore A

[-13 to +302] 80-95

FCE005 EPDM -50 to 130 Shore A

[-58 to +266] 80-95

FCE006 MVQ -55 to 210 Shore A

[-67 to +410] 80-95

FCE007 TFE -15 to 210 Shore A

[5 to +410] 80-95

FCE008 TPU -30 to 125 Shore A

(Customised Colour) [-22 to +257] 80-95

FC002B PTFE -200 to +260 Shore D

[-328 to +500] 55-65

FC021A PEEK -73.3 to 287.7 Shore D

[-100 to +550] 90-95

FCE009 E1001 -30 to 230 Shore A

[-22 to +446] 80-95

FCE010 E1004 -25 to 150 Shore A

[-13 to +302] 80-95

O RING SELECTION METHOD

FCS Material
Part No - Selection

ORSD0001 - FCE001

FCS Part No Material Selection

Page No - 3 to 10 Page No - 2

www.fluorocarbonseals.com 2
 O-RING

Rod Seals

Ød1 Piston Seals

Flange Seals

Ød2

NOTE:
v NON STANDARD DIMENSIONS ARE AVAILABLE ON REQUEST.

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0001 001 0.74 0.12 1.02 0.08 0.029 0.005 0.040 0.003
FCSOR0002 002 1.07 0.12 1.27 0.08 0.042 0.005 0.050 0.003
FCSOR0003 003 1.42 0.12 1.52 0.08 0.056 0.005 0.060 0.003
FCSOR0004 004 1.78 0.13 1.78 0.08 0.070 0.005 0.070 0.003
FCSOR0005 005 2.57 0.13 1.78 0.08 0.101 0.005 0.070 0.003
FCSOR0006 006 2.90 0.13 1.78 0.08 0.114 0.005 0.070 0.003
FCSOR0007 007 3.68 0.14 1.78 0.08 0.145 0.006 0.070 0.003
FCSOR0008 008 4.47 0.15 1.78 0.08 0.176 0.006 0.070 0.003
FCSOR0009 009 5.28 0.15 1.78 0.08 0.208 0.006 0.070 0.003
FCSOR0010 010 6.07 0.16 1.78 0.08 0.239 0.006 0.070 0.003
FCSOR0011 011 7.65 0.17 1.78 0.08 0.301 0.007 0.070 0.003
FCSOR0012 012 9.25 0.18 1.78 0.08 0.364 0.007 0.070 0.003
FCSOR0013 013 10.82 0.20 1.78 0.08 0.426 0.008 0.070 0.003
FCSOR0014 014 12.42 0.21 1.78 0.08 0.489 0.008 0.070 0.003
FCSOR0015 015 14.00 0.22 1.78 0.08 0.551 0.009 0.070 0.003
FCSOR0016 016 15.60 0.23 1.78 0.08 0.614 0.009 0.070 0.003
FCSOR0017 017 17.17 0.24 1.78 0.08 0.676 0.010 0.070 0.003
FCSOR0018 018 18.77 0.26 1.78 0.08 0.739 0.010 0.070 0.003
FCSOR0019 019 20.35 0.27 1.78 0.08 0.801 0.011 0.070 0.003
FCSOR0020 020 21.95 0.28 1.78 0.08 0.864 0.011 0.070 0.003
FCSOR0021 021 23.52 0.29 1.78 0.08 0.926 0.011 0.070 0.003
FCSOR0022 022 25.12 0.30 1.78 0.08 0.989 0.012 0.070 0.003
FCSOR0023 023 26.70 0.31 1.78 0.08 1.051 0.012 0.070 0.003
FCSOR0024 024 28.30 0.33 1.78 0.08 1.114 0.013 0.070 0.003
FCSOR0025 025 29.87 0.34 1.78 0.08 1.176 0.013 0.070 0.003

3 www.fluorocarbonseals.com
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0026 026 31.47 0.35 1.78 0.08 1.239 0.014 0.070 0.003
FCSOR0027 027 33.05 0.36 1.78 0.08 1.301 0.014 0.070 0.003
FCSOR0028 028 34.65 0.37 1.78 0.08 1.364 0.015 0.070 0.003
FCSOR0029 029 37.82 0.39 1.78 0.08 1.489 0.016 0.070 0.003
FCSOR0030 030 41.00 0.42 1.78 0.08 1.614 0.016 0.070 0.003
FCSOR0031 031 44.17 0.44 1.78 0.08 1.739 0.017 0.070 0.003
FCSOR0032 032 47.35 0.46 1.78 0.08 1.864 0.018 0.070 0.003
FCSOR0033 033 50.52 0.48 1.78 0.08 1.989 0.019 0.070 0.003
FCSOR0034 034 53.70 0.51 1.78 0.08 2.114 0.020 0.070 0.003
FCSOR0035 035 56.87 0.53 1.78 0.08 2.239 0.021 0.070 0.003
FCSOR0036 036 60.05 0.55 1.78 0.08 2.364 0.022 0.070 0.003
FCSOR0037 037 63.22 0.57 1.78 0.08 2.489 0.023 0.070 0.003
FCSOR0038 038 66.40 0.59 1.78 0.08 2.614 0.023 0.070 0.003
FCSOR0039 039 69.57 0.62 1.78 0.08 2.739 0.024 0.070 0.003
FCSOR0040 040 72.75 0.64 1.78 0.08 2.864 0.025 0.070 0.003
FCSOR0041 041 75.92 0.66 1.78 0.08 2.989 0.026 0.070 0.003
FCSOR0042 042 82.27 0.70 1.78 0.08 3.239 0.028 0.070 0.003
FCSOR0043 043 88.62 0.75 1.78 0.08 3.489 0.029 0.070 0.003
FCSOR0044 044 94.97 0.79 1.78 0.08 3.739 0.031 0.070 0.003
FCSOR0045 045 101.32 0.83 1.78 0.08 3.989 0.033 0.070 0.003
FCSOR0046 046 107.67 0.88 1.78 0.08 4.239 0.035 0.070 0.003
FCSOR0047 047 114.02 0.92 1.78 0.08 4.489 0.036 0.070 0.003
FCSOR0048 048 120.37 0.96 1.78 0.08 4.739 0.038 0.070 0.003
FCSOR0049 049 126.72 1.01 1.78 0.08 4.989 0.040 0.070 0.003
FCSOR0050 050 133.07 1.05 1.78 0.08 5.239 0.041 0.070 0.003
FCSOR0051 102 1.24 0.12 2.62 0.09 0.049 0.005 0.103 0.004
FCSOR0052 103 2.06 0.13 2.62 0.09 0.081 0.005 0.103 0.004
FCSOR0053 104 2.84 0.13 2.62 0.09 0.112 0.005 0.103 0.004
FCSOR0054 105 3.63 0.14 2.62 0.09 0.143 0.006 0.103 0.004
FCSOR0055 106 4.42 0.15 2.62 0.09 0.174 0.006 0.103 0.004
FCSOR0056 107 5.23 0.15 2.62 0.09 0.206 0.006 0.103 0.004
FCSOR0057 108 6.02 0.16 2.62 0.09 0.237 0.006 0.103 0.004
FCSOR0058 109 7.59 0.17 2.62 0.09 0.299 0.007 0.103 0.004
FCSOR0059 110 9.19 0.18 2.62 0.09 0.362 0.007 0.103 0.004
FCSOR0060 111 10.77 0.20 2.62 0.09 0.424 0.008 0.103 0.004
FCSOR0061 112 12.37 0.21 2.62 0.09 0.487 0.008 0.103 0.004
FCSOR0062 113 13.94 0.22 2.62 0.09 0.549 0.009 0.103 0.004
FCSOR0063 114 15.54 0.23 2.62 0.09 0.612 0.009 0.103 0.004
FCSOR0064 115 17.12 0.24 2.62 0.09 0.674 0.010 0.103 0.004
FCSOR0065 116 18.72 0.26 2.62 0.09 0.737 0.010 0.103 0.004
FCSOR0066 117 20.29 0.27 2.62 0.09 0.799 0.011 0.103 0.004
FCSOR0067 118 21.89 0.28 2.62 0.09 0.862 0.011 0.103 0.004
FCSOR0068 119 23.47 0.29 2.62 0.09 0.924 0.011 0.103 0.004
FCSOR0069 120 25.07 0.30 2.62 0.09 0.987 0.012 0.103 0.004
FCSOR0070 121 26.64 0.31 2.62 0.09 1.049 0.012 0.103 0.004

www.fluorocarbonseals.com 4
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0071 122 28.24 0.33 2.62 0.09 1.112 0.013 0.103 0.004
FCSOR0072 123 29.82 0.34 2.62 0.09 1.174 0.013 0.103 0.004
FCSOR0073 124 31.42 0.35 2.62 0.09 1.237 0.014 0.103 0.004
FCSOR0074 125 32.99 0.36 2.62 0.09 1.299 0.014 0.103 0.004
FCSOR0075 126 34.59 0.37 2.62 0.09 1.362 0.015 0.103 0.004
FCSOR0076 127 36.17 0.38 2.62 0.09 1.424 0.015 0.103 0.004
FCSOR0077 128 37.77 0.39 2.62 0.09 1.487 0.015 0.103 0.004
FCSOR0078 129 39.34 0.40 2.62 0.09 1.549 0.016 0.103 0.004
FCSOR0079 130 40.94 0.42 2.62 0.09 1.612 0.016 0.103 0.004
FCSOR0080 131 42.52 0.43 2.62 0.09 1.674 0.017 0.103 0.004
FCSOR0081 132 44.12 0.44 2.62 0.09 1.737 0.017 0.103 0.004
FCSOR0082 133 45.69 0.45 2.62 0.09 1.799 0.018 0.103 0.004
FCSOR0083 134 47.29 0.46 2.62 0.09 1.862 0.018 0.103 0.004
FCSOR0084 135 48.90 0.47 2.62 0.09 1.925 0.019 0.103 0.004
FCSOR0085 136 50.47 0.48 2.62 0.09 1.987 0.019 0.103 0.004
FCSOR0086 137 52.07 0.49 2.62 0.09 2.050 0.019 0.103 0.004
FCSOR0087 138 53.64 0.51 2.62 0.09 2.112 0.020 0.103 0.004
FCSOR0088 139 55.25 0.52 2.62 0.09 2.175 0.020 0.103 0.004
FCSOR0089 140 56.82 0.53 2.62 0.09 2.237 0.021 0.103 0.004
FCSOR0090 141 58.42 0.54 2.62 0.09 2.300 0.021 0.103 0.004
FCSOR0091 142 59.99 0.55 2.62 0.09 2.362 0.022 0.103 0.004
FCSOR0092 143 61.60 0.56 2.62 0.09 2.425 0.022 0.103 0.004
FCSOR0093 144 63.17 0.57 2.62 0.09 2.487 0.023 0.103 0.004
FCSOR0094 145 64.77 0.58 2.62 0.09 2.550 0.023 0.103 0.004
FCSOR0095 146 66.34 0.59 2.62 0.09 2.612 0.023 0.103 0.004
FCSOR0096 147 67.95 0.61 2.62 0.09 2.675 0.024 0.103 0.004
FCSOR0097 148 69.52 0.62 2.62 0.09 2.737 0.024 0.103 0.004
FCSOR0098 149 71.12 0.63 2.62 0.09 2.800 0.025 0.103 0.004
FCSOR0099 150 72.69 0.64 2.62 0.09 2.862 0.025 0.103 0.004
FCSOR0100 151 75.87 0.66 2.62 0.09 2.987 0.026 0.103 0.004
FCSOR0101 152 82.22 0.70 2.62 0.09 3.237 0.028 0.103 0.004
FCSOR0102 153 88.57 0.75 2.62 0.09 3.487 0.029 0.103 0.004
FCSOR0103 154 94.92 0.79 2.62 0.09 3.737 0.031 0.103 0.004
FCSOR0104 155 101.27 0.83 2.62 0.09 3.987 0.033 0.103 0.004
FCSOR0105 156 107.62 0.88 2.62 0.09 4.237 0.035 0.103 0.004
FCSOR0106 157 113.97 0.92 2.62 0.09 4.487 0.036 0.103 0.004
FCSOR0107 158 120.32 0.96 2.62 0.09 4.737 0.038 0.103 0.004
FCSOR0108 159 126.67 1.00 2.62 0.09 4.987 0.040 0.103 0.004
FCSOR0109 160 133.02 1.05 2.62 0.09 5.237 0.041 0.103 0.004
FCSOR0110 161 139.37 1.09 2.62 0.09 5.487 0.043 0.103 0.004
FCSOR0111 162 145.72 1.13 2.62 0.09 5.737 0.045 0.103 0.004
FCSOR0112 163 152.07 1.17 2.62 0.09 5.987 0.046 0.103 0.004
FCSOR0113 164 158.42 1.22 2.62 0.09 6.237 0.048 0.103 0.004
FCSOR0114 165 164.77 1.26 2.62 0.09 6.487 0.050 0.103 0.004
FCSOR0115 166 171.12 1.30 2.62 0.09 6.737 0.051 0.103 0.004

5 www.fluorocarbonseals.com
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0116 167 177.47 1.34 2.62 0.09 6.987 0.053 0.103 0.004
FCSOR0117 168 183.82 1.38 2.62 0.09 7.237 0.055 0.103 0.004
FCSOR0118 169 190.17 1.43 2.62 0.09 7.487 0.056 0.103 0.004
FCSOR0119 170 196.52 1.47 2.62 0.09 7.737 0.058 0.103 0.004
FCSOR0120 171 202.87 1.51 2.62 0.09 7.987 0.059 0.103 0.004
FCSOR0121 172 209.22 1.55 2.62 0.09 8.237 0.061 0.103 0.004
FCSOR0122 173 215.57 1.59 2.62 0.09 8.487 0.063 0.103 0.004
FCSOR0123 174 221.92 1.63 2.62 0.09 8.737 0.064 0.103 0.004
FCSOR0124 175 228.27 1.68 2.62 0.09 8.987 0.066 0.103 0.004
FCSOR0125 176 234.62 1.72 2.62 0.09 9.237 0.068 0.103 0.004
FCSOR0126 177 240.97 1.76 2.62 0.09 9.487 0.069 0.103 0.004
FCSOR0127 178 247.32 1.80 2.62 0.09 9.737 0.071 0.103 0.004
FCSOR0128 201 4.34 0.15 3.53 0.10 0.171 0.006 0.139 0.004
FCSOR0129 202 5.94 0.16 3.53 0.10 0.234 0.006 0.139 0.004
FCSOR0130 203 7.52 0.17 3.53 0.10 0.296 0.007 0.139 0.004
FCSOR0131 204 9.12 0.18 3.53 0.10 0.359 0.007 0.139 0.004
FCSOR0132 205 10.69 0.20 3.53 0.10 0.421 0.008 0.139 0.004
FCSOR0133 206 12.29 0.21 3.53 0.10 0.484 0.008 0.139 0.004
FCSOR0134 207 13.87 0.22 3.53 0.10 0.546 0.009 0.139 0.004
FCSOR0135 208 15.47 0.23 3.53 0.10 0.609 0.009 0.139 0.004
FCSOR0136 209 17.04 0.24 3.53 0.10 0.671 0.010 0.139 0.004
FCSOR0137 210 18.64 0.25 3.53 0.10 0.734 0.010 0.139 0.004
FCSOR0138 211 20.22 0.27 3.53 0.10 0.796 0.010 0.139 0.004
FCSOR0139 212 21.82 0.28 3.53 0.10 0.859 0.011 0.139 0.004
FCSOR0140 213 23.39 0.29 3.53 0.10 0.921 0.011 0.139 0.004
FCSOR0141 214 24.99 0.30 3.53 0.10 0.984 0.012 0.139 0.004
FCSOR0142 215 26.57 0.31 3.53 0.10 1.046 0.012 0.139 0.004
FCSOR0143 216 28.17 0.32 3.53 0.10 1.109 0.013 0.139 0.004
FCSOR0144 217 29.74 0.34 3.53 0.10 1.171 0.013 0.139 0.004
FCSOR0145 218 31.34 0.35 3.53 0.10 1.234 0.014 0.139 0.004
FCSOR0146 219 32.92 0.36 3.53 0.10 1.296 0.014 0.139 0.004
FCSOR0147 220 34.52 0.37 3.53 0.10 1.359 0.015 0.139 0.004
FCSOR0148 221 36.09 0.38 3.53 0.10 1.421 0.015 0.139 0.004
FCSOR0149 222 37.69 0.39 3.53 0.10 1.484 0.015 0.139 0.004
FCSOR0150 223 40.87 0.42 3.53 0.10 1.609 0.016 0.139 0.004
FCSOR0151 224 44.04 0.44 3.53 0.10 1.734 0.017 0.139 0.004
FCSOR0152 225 47.22 0.46 3.53 0.10 1.859 0.018 0.139 0.004
FCSOR0153 226 50.39 0.48 3.53 0.10 1.984 0.019 0.139 0.004
FCSOR0154 227 53.57 0.51 3.53 0.10 2.109 0.020 0.139 0.004
FCSOR0155 228 56.74 0.53 3.53 0.10 2.234 0.021 0.139 0.004
FCSOR0156 229 59.92 0.55 3.53 0.10 2.359 0.022 0.139 0.004
FCSOR0157 230 63.09 0.57 3.53 0.10 2.484 0.023 0.139 0.004
FCSOR0158 231 66.27 0.59 3.53 0.10 2.609 0.023 0.139 0.004
FCSOR0159 232 69.44 0.62 3.53 0.10 2.734 0.024 0.139 0.004
FCSOR0160 233 72.62 0.64 3.53 0.10 2.859 0.025 0.139 0.004
FCSOR0161 234 75.79 0.66 3.53 0.10 2.984 0.026 0.139 0.004

www.fluorocarbonseals.com 6
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0162 235 78.97 0.68 3.53 0.10 3.109 0.027 0.139 0.004
FCSOR0163 236 82.14 0.70 3.53 0.10 3.234 0.028 0.139 0.004
FCSOR0164 237 85.32 0.72 3.53 0.10 3.359 0.029 0.139 0.004
FCSOR0165 238 88.49 0.75 3.53 0.10 3.484 0.029 0.139 0.004
FCSOR0166 239 91.67 0.77 3.53 0.10 3.609 0.030 0.139 0.004
FCSOR0167 240 94.84 0.79 3.53 0.10 3.734 0.031 0.139 0.004
FCSOR0168 241 98.02 0.81 3.53 0.10 3.859 0.032 0.139 0.004
FCSOR0169 242 101.19 0.83 3.53 0.10 3.984 0.033 0.139 0.004
FCSOR0170 243 104.37 0.85 3.53 0.10 4.109 0.034 0.139 0.004
FCSOR0171 244 107.54 0.88 3.53 0.10 4.234 0.034 0.139 0.004
FCSOR0172 245 110.72 0.90 3.53 0.10 4.359 0.035 0.139 0.004
FCSOR0173 246 113.89 0.92 3.53 0.10 4.484 0.036 0.139 0.004
FCSOR0174 247 117.07 0.94 3.53 0.10 4.609 0.037 0.139 0.004
FCSOR0175 248 120.24 0.96 3.53 0.10 4.734 0.038 0.139 0.004
FCSOR0176 249 123.42 0.98 3.53 0.10 4.859 0.039 0.139 0.004
FCSOR0177 250 126.59 1.00 3.53 0.10 4.984 0.040 0.139 0.004
FCSOR0178 251 129.77 1.03 3.53 0.10 5.109 0.040 0.139 0.004
FCSOR0179 252 132.94 1.05 3.53 0.10 5.234 0.041 0.139 0.004
FCSOR0180 253 136.12 1.07 3.53 0.10 5.359 0.042 0.139 0.004
FCSOR0181 254 139.29 1.09 3.53 0.10 5.484 0.043 0.139 0.004
FCSOR0182 255 142.47 1.11 3.53 0.10 5.609 0.044 0.139 0.004
FCSOR0183 256 145.64 1.13 3.53 0.10 5.734 0.045 0.139 0.004
FCSOR0184 257 148.82 1.15 3.53 0.10 5.859 0.045 0.139 0.004
FCSOR0185 258 151.99 1.17 3.53 0.10 5.984 0.046 0.139 0.004
FCSOR0186 259 158.34 1.22 3.53 0.10 6.234 0.048 0.139 0.004
FCSOR0187 260 164.69 1.26 3.53 0.10 6.484 0.050 0.139 0.004
FCSOR0188 261 171.04 1.30 3.53 0.10 6.734 0.051 0.139 0.004
FCSOR0189 262 177.39 1.34 3.53 0.10 6.984 0.053 0.139 0.004
FCSOR0190 263 183.74 1.38 3.53 0.10 7.234 0.054 0.139 0.004
FCSOR0191 264 190.09 1.43 3.53 0.10 7.484 0.056 0.139 0.004
FCSOR0192 265 196.44 1.47 3.53 0.10 7.734 0.058 0.139 0.004
FCSOR0193 266 202.79 1.51 3.53 0.10 7.984 0.059 0.139 0.004
FCSOR0194 267 209.14 1.55 3.53 0.10 8.234 0.061 0.139 0.004
FCSOR0195 268 215.49 1.59 3.53 0.10 8.484 0.063 0.139 0.004
FCSOR0196 269 221.84 1.63 3.53 0.10 8.734 0.064 0.139 0.004
FCSOR0197 270 228.19 1.68 3.53 0.10 8.984 0.066 0.139 0.004
FCSOR0198 271 234.54 1.72 3.53 0.10 9.234 0.068 0.139 0.004
FCSOR0199 272 240.89 1.76 3.53 0.10 9.484 0.069 0.139 0.004
FCSOR0200 273 247.24 1.80 3.53 0.10 9.734 0.071 0.139 0.004
FCSOR0201 274 253.59 1.84 3.53 0.10 9.984 0.072 0.139 0.004
FCSOR0202 275 266.29 1.92 3.53 0.10 10.484 0.076 0.139 0.004
FCSOR0203 276 278.99 2.00 3.53 0.10 10.984 0.079 0.139 0.004
FCSOR0204 277 291.69 2.09 3.53 0.10 11.484 0.082 0.139 0.004
FCSOR0205 278 304.39 2.17 3.53 0.10 11.984 0.085 0.139 0.004
FCSOR0206 279 329.79 2.33 3.53 0.10 12.984 0.092 0.139 0.004
FCSOR0207 280 355.19 2.49 3.53 0.10 13.984 0.098 0.139 0.004
FCSOR0208 281 380.59 2.65 3.53 0.10 14.984 0.105 0.139 0.004

7 www.fluorocarbonseals.com
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0209 282 405.26 2.81 3.53 0.10 15.955 0.111 0.139 0.004
FCSOR0210 283 430.66 2.97 3.53 0.10 16.955 0.117 0.139 0.004
FCSOR0211 284 456.06 3.13 3.53 0.10 17.955 0.123 0.139 0.004
FCSOR0212 309 10.46 0.19 5.33 0.13 0.412 0.008 0.210 0.005
FCSOR0213 310 12.07 0.21 5.33 0.13 0.475 0.008 0.210 0.005
FCSOR0214 311 1364 0.22 5.33 0.13 0.537 0.009 0.210 0.005
FCSOR0215 312 15.24 0.23 5.33 0.13 0.600 0.009 0.210 0.005
FCSOR0216 313 16.81 0.24 5.33 0.13 0.662 0.010 0.210 0.005
FCSOR0217 314 18.42 0.25 5.33 0.13 0.725 0.010 0.210 0.005
FCSOR0218 315 19.99 0.26 5.33 0.13 0.787 0.010 0.210 0.005
FCSOR0219 316 21.59 0.28 5.33 0.13 0.850 0.011 0.210 0.005
FCSOR0220 317 23.16 0.29 5.33 0.13 0.912 0.011 0.210 0.005
FCSOR0221 318 24.77 0.30 5.33 0.13 0.975 0.012 0.210 0.005
FCSOR0222 319 26.34 0.31 5.33 0.13 1.037 0.012 0.210 0.005
FCSOR0223 320 27.94 0.32 5.33 0.13 1.100 0.013 0.210 0.005
FCSOR0224 321 29.51 0.33 5.33 0.13 1.162 0.013 0.210 0.005
FCSOR0225 322 31.12 0.35 5.33 0.13 1.225 0.014 0.210 0.005
FCSOR0226 323 32.69 0.36 5.33 0.13 1.287 0.014 0.210 0.005
FCSOR0227 324 34.29 0.37 5.33 0.13 1.350 0.015 0.210 0.005
FCSOR0228 325 37.47 0.39 5.33 0.13 1.475 0.015 0.210 0.005
FCSOR0229 326 40.64 0.41 5.33 0.13 1.600 0.016 0.210 0.005
FCSOR0230 327 43.82 0.44 5.33 0.13 1.725 0.017 0.210 0.005
FCSOR0231 328 46.99 0.46 5.33 0.13 1.850 0.018 0.210 0.005
FCSOR0232 329 50.17 0.48 5.33 0.13 1.975 0.019 0.210 0.005
FCSOR0233 330 53.34 0.50 5.33 0.13 2.100 0.020 0.210 0.005
FCSOR0234 331 56.52 0.53 5.33 0.13 2.225 0.021 0.210 0.005
FCSOR0235 332 59.69 0.55 5.33 0.13 2.350 0.022 0.210 0.005
FCSOR0236 333 62.87 0.57 5.33 0.13 2.475 0.022 0.210 0.005
FCSOR0237 334 66.04 0.59 5.33 0.13 2.600 0.023 0.210 0.005
FCSOR0238 335 69.22 0.61 5.33 0.13 2.725 0.024 0.210 0.005
FCSOR0239 336 72.39 0.64 5.33 0.13 2.850 0.025 0.210 0.005
FCSOR0240 337 75.57 0.66 5.33 0.13 2.975 0.026 0.210 0.005
FCSOR0241 338 78.74 0.68 5.33 0.13 3.100 0.027 0.210 0.005
FCSOR0242 339 81.92 0.70 5.33 0.13 3.225 0.028 0.210 0.005
FCSOR0243 340 85.09 0.72 5.33 0.13 3.350 0.028 0.210 0.005
FCSOR0244 341 88.27 0.74 5.33 0.13 3.475 0.029 0.210 0.005
FCSOR0245 342 91.44 0.77 5.33 0.13 3.600 0.030 0.210 0.005
FCSOR0246 343 94.62 0.79 5.33 0.13 3.725 0.031 0.210 0.005
FCSOR0247 344 97.79 0.81 5.33 0.13 3.850 0.032 0.210 0.005
FCSOR0248 345 100.97 0.83 5.33 0.13 3.975 0.033 0.210 0.005
FCSOR0249 346 104.14 0.85 5.33 0.13 4.100 0.034 0.210 0.005
FCSOR0250 347 107.32 0.87 5.33 0.13 4.225 0.034 0.210 0.005
FCSOR0251 348 110.49 0.90 5.33 0.13 4.350 0.035 0.210 0.005
FCSOR0252 349 113.67 0.92 5.33 0.13 4.475 0.036 0.210 0.005
FCSOR0253 350 116.84 0.94 5.33 0.13 4.600 0.037 0.210 0.005
FCSOR0254 351 120.02 0.96 5.33 0.13 4.725 0.038 0.210 0.005
FCSOR0255 352 123.19 0.98 5.33 0.13 4.850 0.039 0.210 0.005

www.fluorocarbonseals.com 8
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0256 353 126.37 1.00 5.33 0.13 4.975 0.039 0.210 0.005
FCSOR0257 354 129.54 1.02 5.33 0.13 5.100 0.040 0.210 0.005
FCSOR0258 355 132.72 1.05 5.33 0.13 5.225 0.041 0.210 0.005
FCSOR0259 356 135.89 1.07 5.33 0.13 5.350 0.042 0.210 0.005
FCSOR0260 357 139.07 1.09 5.33 0.13 5.475 0.043 0.210 0.005
FCSOR0261 358 142.24 1.11 5.33 0.13 5.600 0.044 0.210 0.005
FCSOR0262 359 145.42 1.13 5.33 0.13 5.725 0.045 0.210 0.005
FCSOR0263 360 148.59 1.15 5.33 0.13 5.850 0.045 0.210 0.005
FCSOR0264 361 151.77 1.17 5.33 0.13 5.975 0.046 0.210 0.005
FCSOR0265 362 158.12 1.21 5.33 0.13 6.225 0.048 0.210 0.005
FCSOR0266 363 164.47 1.26 5.33 0.13 6.475 0.049 0.210 0.005
FCSOR0267 364 170.82 1.30 5.33 0.13 6.725 0.051 0.210 0.005
FCSOR0268 365 177.17 1.34 5.33 0.13 6.975 0.053 0.210 0.005
FCSOR0269 366 183.52 1.38 5.33 0.13 7.225 0.054 0.210 0.005
FCSOR0270 367 189.87 1.42 5.33 0.13 7.475 0.056 0.210 0.005
FCSOR0271 368 196.22 1.47 5.33 0.13 7.725 0.058 0.210 0.005
FCSOR0272 369 202.57 1.51 5.33 0.13 7.975 0.059 0.210 0.005
FCSOR0273 370 208.92 1.55 5.33 0.13 8.225 0.061 0.210 0.005
FCSOR0274 371 215.27 1.59 5.33 0.13 8.475 0.063 0.210 0.005
FCSOR0275 372 221.62 1.63 5.33 0.13 8.725 0.064 0.210 0.005
FCSOR0276 373 227.97 1.67 5.33 0.13 8.975 0.066 0.210 0.005
FCSOR0277 374 234.32 1.72 5.33 0.13 9.225 0.068 0.210 0.005
FCSOR0278 375 240.67 1.76 5.33 0.13 9.475 0.069 0.210 0.005
FCSOR0279 376 247.02 1.80 5.33 0.13 9.725 0.071 0.210 0.005
FCSOR0280 377 253.37 1.84 5.33 0.13 9.975 0.072 0.210 0.005
FCSOR0281 378 266.07 1.92 5.33 0.13 10.475 0.076 0.210 0.005
FCSOR0282 379 278.77 2.00 5.33 0.13 10.975 0.079 0.210 0.005
FCSOR0283 380 291.47 2.09 5.33 0.13 11.475 0.082 0.210 0.005
FCSOR0284 381 304.17 2.17 5.33 0.13 11.975 0.085 0.210 0.005
FCSOR0285 382 329.57 2.33 5.33 0.13 12.975 0.092 0.210 0.005
FCSOR0286 383 354.97 2.49 5.33 0.13 13.975 0.098 0.210 0.005
FCSOR0287 384 380.37 2.65 5.33 0.13 14.975 0.104 0.210 0.005
FCSOR0288 385 405.26 2.81 5.33 0.13 15.955 0.111 0.210 0.005
FCSOR0289 386 430.66 2.97 5.33 0.13 16.955 0.117 0.210 0.005
FCSOR0290 387 456.06 3.13 5.33 0.13 17.955 0.123 0.210 0.005
FCSOR0291 388 481.46 3.29 5.33 0.13 18.955 0.130 0.210 0.005
FCSOR0292 389 506.86 3.45 5.33 0.13 19.955 0.136 0.210 0.005
FCSOR0293 390 532.26 3.61 5.33 0.13 20.955 0.142 0.210 0.005
FCSOR0294 391 557.66 3.77 5.33 0.13 21.955 0.148 0.210 0.005
FCSOR0295 392 582.68 3.92 5.33 0.13 22.940 0.154 0.210 0.005
FCSOR0296 393 608.08 4.08 5.33 0.13 23.940 0.161 0.210 0.005
FCSOR0297 394 633.48 4.24 5.33 0.13 24.940 0.167 0.210 0.005
FCSOR0298 395 658,88 4.40 5.33 0.13 25.940 0.173 0.210 0.005
FCSOR0299 425 113.67 0.92 6.99 0.13 4.475 0.036 0.210 0.005
FCSOR0300 426 116.84 0.94 6.99 0.13 4.600 0.037 0.210 0.005
FCSOR0301 427 120.02 0.96 6.99 0.13 4.725 0.038 0.210 0.005
FCSOR0302 428 123.19 0.98 6.99 0.13 4.850 0.039 0.210 0.005

9 www.fluorocarbonseals.com
 O-RING

Inside Ø Cross Section Ø Inside Ø Cross Section Ø

FCS Size
Part No. Code d1 Tolerance d2 Tolerance d1 Tolerance d2 Tolerance
(mm) (mm) (mm) (mm) (Inch) (Inch) (Inch) (Inch)
FCSOR0303 429 126.37 1.00 6.99 0.15 4.975 0.039 0.275 0.006
FCSOR0304 430 129.54 1.02 6.99 0.15 5.100 0.040 0.275 0.006
FCSOR0305 431 132.72 1.05 6.99 0.15 5.225 0.041 0.275 0.006
FCSOR0306 432 135.89 1.07 6.99 0.15 5.350 0.042 0.275 0.006
FCSOR0307 433 139.07 1.09 6.99 0.15 5.475 0.043 0.275 0.006
FCSOR0308 434 142.24 1.11 6.99 0.15 5.600 0.044 0.275 0.006
FCSOR0309 435 145.42 1.13 6.99 0.15 5.725 0.045 0.275 0.006
FCSOR0310 436 148.59 1.15 6.99 0.15 5.850 0.045 0.275 0.006
FCSOR0311 437 151.77 1.17 6.99 0.15 5.975 0.046 0.275 0.006
FCSOR0312 438 158.12 1.21 6.99 0.15 6.225 0.048 0.275 0.006
FCSOR0313 439 164.47 1.26 6.99 0.15 6.475 0.049 0.275 0.006
FCSOR0314 440 170.82 1.30 6.99 0.15 6.750 0.051 0.275 0.006
FCSOR0315 441 177.17 1.34 6.99 0.15 6.975 0.053 0.275 0.006
FCSOR0316 442 183.52 1.38 6.99 0.15 7.225 0.054 0.275 0.006
FCSOR0317 443 189.87 1.42 6.99 0.15 7.475 0.056 0.275 0.006
FCSOR0318 444 196.22 1.47 6.99 0.15 7.725 0.058 0.275 0.006
FCSOR0319 445 202.57 1.51 6.99 0.15 7.975 0.059 0.275 0.006
FCSOR0320 446 215.27 1.59 6.99 0.15 8.475 0.063 0.275 0.006
FCSOR0321 447 227.97 1.67 6.99 0.15 8.975 0.066 0.275 0.006
FCSOR0322 448 240.67 1.76 6.99 0.15 9.475 0.069 0.275 0.006
FCSOR0323 449 253.37 1.84 6.99 0.15 9.975 0.072 0.275 0.006
FCSOR0324 450 266.07 1.92 6.99 0.15 10.475 0.076 0.275 0.006
FCSOR0325 451 278.77 2.00 6.99 0.15 10.975 0.079 0.275 0.006
FCSOR0326 452 291.47 2.09 6.99 0.15 11.475 0.082 0.275 0.006
FCSOR0327 453 304.17 2.17 6.99 0.15 11.975 0.085 0.275 0.006
FCSOR0328 454 316.87 2.25 6.99 0.15 12.475 0.089 0.275 0.006
FCSOR0329 455 329.57 2.33 6.99 0.15 12.975 0.092 0.275 0.006
FCSOR0330 456 342.27 2.41 6.99 0.15 13.475 0.095 0.275 0.006
FCSOR0331 457 354.97 2.49 6.99 0.15 13.975 0.098 0.275 0.006
FCSOR0332 458 367.67 2.57 6.99 0.15 14.475 0.101 0.275 0.006
FCSOR0333 459 380.37 2.65 6.99 0.15 14.975 0.104 0.275 0.006
FCSOR0334 460 393.07 2.73 6.99 0.15 15.475 0.108 0.275 0.006
FCSOR0335 461 405.26 2.81 6.99 0.15 15.955 0.111 0.275 0.006
FCSOR0336 462 417.96 2.89 6.99 0.15 16.455 0.114 0.275 0.006
FCSOR0337 463 430.66 2.97 6.99 0.15 16.955 0.117 0.275 0.006
FCSOR0338 464 443.36 3.05 6.99 0.15 17.455 0.120 0.275 0.006
FCSOR0339 465 456.06 3.13 6.99 0.15 17.955 0.123 0.275 0.006
FCSOR0340 466 468.76 3.21 6.99 0.15 18.455 0.126 0.275 0.006
FCSOR0341 467 481.46 3.29 6.99 0.15 18.955 0.130 0.275 0.006
FCSOR0342 468 494.16 3.37 6.99 0.15 19.455 0.133 0.275 0.006
FCSOR0343 469 506.86 3.45 6.99 0.15 19.955 0.136 0.275 0.006
FCSOR0344 470 532.26 3.61 6.99 0.15 20.955 0.142 0.275 0.006
FCSOR0345 471 557.66 3.77 6.99 0.15 21.955 0.148 0.275 0.006
FCSOR0346 472 582.68 3.92 6.99 0.15 22.940 0.154 0.275 0.006
FCSOR0347 473 608.08 4.08 6.99 0.15 23.940 0.161 0.275 0.006
FCSOR0348 474 633.48 4.24 6.99 0.15 24.940 0.167 0.275 0.006
FCSOR0349 475 658.88 4.40 6.99 0.15 25.940 0.173 0.275 0.006

www.fluorocarbonseals.com 10
 BACKUP
RING

11 www.fluorocarbonseals.com
 BACK-UP RING INTRODUCTION

Back-up Rings General Information :-

Back-up Rings are made by different material of polymer or rubber which is used to prevent the O-
ring from entering the clearance gap. When the high pressure is contacted directly to words the O-
ring it starts to failure the rubber. To prevent the failure of O-ring we to have place the back-up ring
which will prevent O-ring flow to words the clearance gap. The back-up ring are manufacture as per
military standards, ISO Standards, AS Standards and also customised dimension are all also used
manufacture.

Clearance Clearance
Gap Gap

Pressure Pressure
Direction Direction

With out back-up ring the O-ring With back-up ring the O-ring get stoped to
travel towards clearance gap. travel towards clearance gap.

Profile Back-up Ring Back-up Ring

Back-up Ring Profile
Part Profile Name Page No.

Spiral Back-up
A 16 to 18
Ring

Solid Back-up
B 19 to 22
Ring

Angle cut Back-

C 23 to 26
up Ring

Solid Concave
D 27 to 31
Back-up Ring

Angle Cut
E Concave Back-up 27 to 31
Ring

www.fluorocarbonseals.com 12
 BACK-UP RING MATERIAL

Material Description Typical Applications Temperature Coefficient of

Code Range ºC [ºF] Friction

FC002B Modified PTFE An FDA compliant, light duty -200 to +260 .05 / .08
material. Good in light gases and [-328 to +500]
cryogenic service.

FC004G Glass Filled A highly wear resistant blend -156.6 to +287.7 .06 / .10
PTFE good for high speed applications [-250 to +550]
on hardened shafts.

FC005C Carbon/Graphite A good material choice for -195.5 to +246.1 .08 / .12
Filled PTFE combinations of speed and [-320 to +475]
temperature.

FC021A PEEK A high-modulus, engineered -73.3 to +287.7 .35 / .45

plastic with excellent thermal [-100 to +550]
and mechanical properties.

FC061A Acetal / POM As a backup ring this material -56.6 to +90

has good extrusion resistance [-70 to +194] .30 / .40
with low water absorption.

FC041A Thermoplastic When corrosion resistance and -62.2 to +135 .30 / .60
Elastomer temperature extremes are not [-80 to +275]
the primary concerns TPE is a
good choice for tight sealing.

FC0N9010 Poly Amide As a backup ring this material -56.6 to +121.1 .30 / .40
has good extrusion resistance [-70 to +250]
with low water absorption.

13 www.fluorocarbonseals.com
BACK-UP RING SELECTION METHOD

Profile Part Material

FCS FCS Part No
Selection Selection

A FCS BUR070001 FC002B

FCS Part No Material Selection

Page No -15 to 30 Page No - 13

Profile
Profile Name Profile Page No.
Part

Solid Back-up
A 15 to 18
Ring

Angle cut Back-up

B 19 to 23
Ring

Spiral Back-up
C 24 to 25
Ring

Solid Concave
D 26 to 30
Back-up Ring

Angle Cut
E Concave Back-up 26 to 30
Ring

www.fluorocarbonseals.com 14
 SOLID BACK-UP RING

1 2

W ID

1.With two Backup Ring

2.With one Backup Ring

NOTE:
v NON STANDARD DIMENSIONS ARE AVAILABLE ON REQUEST.

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Tolerance Thickness Diameter Tolerance Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR070001 004 0.080 004 2.032

BUR070002 005 0.111 005 2.819
BUR070003 006 0.125 006 3.175
BUR070004 007 0.156 007 3.962
BUR070005 008 0.187 008 4.750
BUR070006 009 0.219 009 5.563
BUR070007 010 0.250 010 6.350
BUR070008 011 0.312 011 7.925
BUR070009 012 0.375 ± 0.001 012 9.525 ± 0.025
BUR070010 013 0.440 013 11.176
BUR070011 014 0.503 014 12.776
BUR070012 015 0.565 0.050 0.055 015 14.351 1.270 1.387
BUR070013 016 0.628 016 15.951
0.690 ± 0.002 ± 0.001 17.526
± 0.051 ± 0.025
BUR070014 017 017
BUR070015 018 0.753 018 19.126
BUR070016 019 0.815 019 20.701
BUR070017 020 0.881 ±0. 1 020 22.377
BUR070018 021 0.943 021 23.952
BUR070019 022 1.006 022 25.552
BUR070020 023 1.068 023 27.127
BUR070021 024 1.131 024 28.727 ± 0.051
± 0.002
BUR070022 025 1.193 025 30.302
BUR070023 026 1.256 026 31.902
BUR070024 027 1.318 027 33.477
BUR070025 028 1.381 028 35.077

15 www.fluorocarbonseals.com
 SOLID BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Tolerance Thickness Diameter Tolerance Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR070026 110 0.374 110 9.500

BUR070027 111 0.437 111 11.100
BUR070028 112 0.499 112 12.675
BUR070029 113 0.562 113 14.275
BUR070030 114 0.624 114 15.850
BUR070031 115 0.687 ± 0.001 115 17.450 ± 0.025
BUR070032 116 0.749 116 19.025
BUR070033 117 0.815 117 20.701
BUR070034 118 0.877 118 22.276
BUR070035 119 0.940 119 23.876
BUR070036 120 1.002 120 25.451
BUR070037 121 1.065 121 27.051
BUR070038 122 1.127 122 28.626
BUR070039 123 1.190 123 30.226
BUR070040 124 1.252 124 31.801
BUR070041 125 1.315 125 33.401
BUR070042 126 1.377 ±0. 1 126 34.976
BUR070043 127 1.440 127 36.576
BUR070044 128 1.502 128 38.151
BUR070045 129 1.565 0.050 0.088 129 39.751 1.270 2.235
BUR070046 130 1.629 ± 0.002 ± 0.001 130 41.377 ±0.051 ±0.025
BUR070047 131 1.691 131 42.951
BUR070048 132 1.754 132 44.552
BUR070049 133 1.816 133 46.126
BUR070050 134 1.879 134 47.727
BUR070051 135 1.942 ± 0.002 135 49.327 ± 0.051
BUR070052 136 2.004 136 50.902
BUR070053 137 2.067 137 52.502
BUR070054 138 2.129 138 54.077
BUR070055 139 2.192 139 55.677
BUR070056 140 2.254 140 57.252
BUR070057 141 2.317 141 58.852
BUR070058 142 2.379 142 60.427
BUR070059 143 2.442 143 62.027
BUR070060 144 2.504 144 63.602
BUR070061 145 2.567 145 65.202
BUR070062 146 2.629 146 66.777
BUR070063 147 1.692 147 42.977
BUR070064 148 2.754 148 69.952
BUR070065 149 2.817 149 71.552
BUR070066 210 0.753 210 19.126
BUR070067 211 0.815 211 20.701
± 0.001 0.050 0.119 ± 0.025 1.270 3.023
BUR070068 212 0.878 212 22.301
BUR070069 213 0.940 ±0.002 ± 0.001 213 23.876 ±0.051 ± 0.025
BUR070070 214 1.003 214 25.476
± 0.002 ± 0.051
BUR070071 215 1.065 215 27.051

www.fluorocarbonseals.com 16
 SOLID BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Tolerance Thickness Diameter Tolerance Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR070072 216 1.128 216 28.651

BUR070073 217 1.190 217 30.226
BUR070074 218 1.253 218 31.826
BUR070075 219 1.315 219 33.401
BUR070076 220 1.378 220 35.001
BUR070077 221 1.440 221 36.576
BUR070078 222 1.503 222 38.16
BUR070079 223 1.629 223 41.377
BUR070080 224 1.754 224 44.552
BUR070081 225 1.880 225 47.752
BUR070082 226 2.005 226 50.927
BUR070083 227 2.130 227 54.102
BUR070084 228 2.255 228 57.277
BUR070085 229 2.380 229 60.452
BUR070086 230 2.505 230 63.627
0.050 0.119 1.27 3.023
BUR070087 231 2.630 231 66.802
±0.002 ±0.051
BUR070088 232 2.755 ±0. 1

±0.002 ± 0.001 232 69.977 ±0.051 ± 0.025

BUR070089 233 2.880 233 73.152
BUR070090 234 3.005 234 76.327
BUR070091 235 3.130 235 79.502
BUR070092 236 3.255 236 82.677
BUR070093 237 3.380 237 85.852
BUR070094 238 3.505 238 89.027
BUR070095 239 3.630 239 92.202
BUR070096 240 3.755 240 95.377
BUR070097 241 3.880 241 98.552
BUR070098 242 4.005 242 101.727
BUR070099 243 4.130 243 104.902
BUR070100 244 4.255 244 108.077
BUR070101 245 4.380 245 111.252
BUR070102 246 4.505 246 114.427
BUR070103 247 4.630 247 117.602
BUR070104 325 1.497 325 38.024
BUR070105 326 1.622 326 41.199
BUR070106 327 1.748 327 44.399
BUR070107 328 1.873 328 47.574
BUR070108 329 1.998 329 50.749
BUR070109 330 2.123 330 53.924
0.073 0.185 1.854 4.699
BUR070110 331 2.248 331 57.099
± 0.002 ± 0.051
BUR070111 332 2.373 ± 0.002 ± 0.001 332 60.274 ± 0.051 ± 0.025
BUR070112 333 2.498 333 63.449
BUR070113 334 2.623 334 66.624
BUR070114 335 2.748 335 69.799
BUR070115 336 2.873 336 72.974
BUR070116 337 2.998 337 76.149
BUR070117 338 3.123 338 79.324

17 www.fluorocarbonseals.com
 SOLID BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Tolerance Thickness Diameter Tolerance Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR070118 339 3.248 339 82.499

BUR070119 340 3.373 340 85.674
BUR070120 341 3.498 341 88.849
BUR070121 342 3.623 342 92.024
BUR017022 343 3.748 0.073 0.185 343 95.199 1.854 4.699
BUR070123 344 3.873 ± 0.002 344 98.374 ± 0.051
BUR070124 345 3.998 ± 0.002 ± 0.001 345 101.549 ± 0.051 ± 0.025
BUR070125 346 4.123 346 104.724
BUR070126 347 4.248 347 107.899
BUR070127 348 4.373 348 111.074
BUR070128 349 4.498 349 114.249
BUR070129 425 4.502 425 114.351
BUR070130 426 4.627 426 117.526
BUR070131 427 4.752 427 120.701
BUR070132 428 4.877 428 123.876
BUR070133 429 5.002 429 127.051
BUR070134 430 5.127 ±0. 1 430 130.226
BUR070135 431 5.252 431 133.401
BUR070136 432 5.377 432 136.576
BUR070137 433 5.502 433 139.751
BUR070138 434 5.627 434 142.926
BUR070140 435 5.752 ± 0.002 435 146.101 ± 0.051
BUR070141 436 5.877 436 149.276
BUR070142 437 6.002 437 152.451
BUR070143 438 6.252 438 158.801
BUR070144 439 6.502 439 165.151
BUR070145 440 6.752 440 171.501
BUR070146 441 7.002 441 177.851
BUR070147 442 7.252 0.108 0.236 442 184.201 2.743 5.994
BUR070148 443 7.502 ± 0.002 ± 0.001 443 190.551 ± 0.051 ± 0.025
BUR070149 444 7.752 444 196.901
BUR070150 445 8.002 445 203.251
BUR070151 446 8.502 446 215.951
BUR070152 447 9.002 447 228.651
BUR070153 448 9.502 ± 0.003 448 241.351 ± 0.076
BUR070154 449 10.002 449 254.051
BUR070155 450 10.502 450 266.751
BUR070156 451 11.002 451 279.451
BUR070157 452 11.502 452 292.151
BUR070158 453 12.002 ± 0.004 453 304.851 ± 0.102
BUR070159 454 12.502 454 317.551
BUR070160 455 13.002 455 330.251
BUR070161 456 13.502 456 342.951
BUR070162 457 14.002 457 355.651
BUR070163 458 14.502 ± 0.005 458 368.351 ± 0.127
BUR070164 459 15.002 459 381.051
BUR070165 460 15.502 460 393.751

www.fluorocarbonseals.com 18
 ANGLE CUT BACK-UP RING

1 2

W ID

1.With two Backup Ring

2.With one Backup Ring

NOTE:
v NON STANDARD DIMENSIONS ARE AVAILABLE ON REQUEST.

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Thickness Diameter Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR080001 004 0.109 0.52 0.54 004 2.769 13.208 13.716

BUR080002 005 0.124 005 3.150
BUR080003 006 0.140 006 3.556
BUR080004 007 0.171 007 4.343
BUR080005 008 0.202 008 5.131
BUR080006 009 0.234 009 5.944
BUR080007 010 0.265 010 6.731
BUR080008 011 0.327 011 8.306
BUR080009 012 0.390 012 9.906
BUR080010 013 0.455 013 11.557
BUR080011 014 0.518 014 13.157
BUR080012 015 0.580 015 14.732
BUR080013 016 0.643 016 16.332
0.045 0.052 1.143 1.270
BUR080014 017 0.705 017 17.907
BUR080015 018 0.768 018 19.507
BUR080016 019 0.830 019 21.082
BUR080017 020 0.898 020 22.809
BUR080018 021 0.960 021 24.384
BUR080019 022 1.023 022 25.984
BUR080020 023 1.085 023 27.559
BUR080021 024 1.148 024 29.159
BUR080022 025 1.210 025 30.734
BUR080023 026 1.273 026 32.334
BUR080024 027 1.335 027 33.909
BUR080025 028 1.398 028 35.509

19 www.fluorocarbonseals.com
 ANGLE CUT BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Thickness Diameter Thickness
(T) (T)
(ID) (W) (ID) (W)
BUR080026 110 0.390 0.006 110 9.906 0.152
BUR080027 111 0.452 111 11.481
BUR080028 112 0.515 112 13.081
BUR080029 113 0.577 113 14.656
BUR080030 114 0.640 114 16.256
BUR080031 115 0.702 115 17.831
BUR080032 116 0.765 116 19.431
BUR080033 117 0.832 117 21.133
BUR080034 118 0.895 0.045 0.000 118 22.733 1.143 0.000
BUR080035 119 0.957 119 24.308
BUR080036 120 1.020 120 25.908
BUR080037 121 1.082 121 27.483
BUR080038 122 1.145 122 29.083
BUR080039 123 1.207 123 30.658
BUR080040 124 1.270 124 32.258
BUR080041 125 1.332 125 33.833
BUR080042 126 1.397 126 35.484
BUR080043 127 1.459 0.052 0.087 127 37.059 1.321 2.210
BUR080044 128 1.522 128 38.659
BUR080045 129 1.584 129 40.234
BUR080046 130 1.647 130 41.834
BUR080047 131 1.709 131 43.409
BUR080048 132 1.772 132 45.009
BUR080049 133 1.834 133 46.584
BUR080050 134 1.897 134 48.184
BUR080051 135 1.959 135 49.759
BUR080052 136 2.022 136 51.359
BUR080053 137 2.084 137 52.934
BUR080054 138 2.147 138 54.534
0.045 0.085 1.143 2.159
BUR080055 139 2.209 139 56.109
BUR080056 140 2.258 140 57.353
BUR080057 141 2.320 141 58.928
BUR080058 142 2.383 142 60.528
BUR080059 143 2.445 143 62.103
BUR080060 144 2.508 144 63.703
BUR080061 145 2.570 145 65.278
BUR080062 146 2.633 146 66.878
BUR080063 147 2.695 147 68.453
BUR080064 148 2.758 148 70.053
BUR080065 149 2.820 149 71.628
BUR080066 210 0.766 0.120 210 19.456 3.048
BUR080067 211 0.828 211 21.031
BUR080068 212 0.891 212 22.631
0.045 0.118 1.143 2.997
BUR080069 213 0.953 213 24.206
BUR080070 214 1.016 214 25.806
BUR080071 215 1.078 215 27.381

www.fluorocarbonseals.com 20
 ANGLE CUT BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Thickness Diameter Thickness
(T) (T)
(ID) (W) (ID) (W)
BUR080072 216 1.141 216 28.981
BUR080073 217 1.203 217 30.556
BUR080074 218 1.266 218 32.156
BUR080075 219 1.334 219 33.884
BUR080076 220 1.397 220 35.484
BUR080077 221 1.459 221 37.059
BUR080078 222 1.522 222 38.659
BUR080079 223 1.647 0.045 0.118 223 41.834 1.143 2.997
BUR080080 224 1.772 224 45.009
BUR080081 225 1.897 225 48.184
BUR080082 226 2.022 226 51.359
BUR080083 227 2.147 227 54.534
BUR080084 228 2.272 228 57.709
BUR080085 229 2.397 229 60.884
BUR080086 230 2.522 230 64.059
BUR080087 231 2.631 0.052 0.120 231 66.827 1.321 3.048
BUR080088 232 2.756 232 70.002
BUR080089 233 2.881 233 73.177
BUR080090 234 3.006 234 76.352
BUR080091 235 3.131 235 79.527
BUR080092 236 3.256 236 82.702
BUR080093 237 3.81 237 85.877
BUR080094 238 3.506 238 89.052
BUR080095 239 3.631 239 92.227
0.045 0.118 1.143 2.997
BUR080096 240 3.756 240 95.402
BUR080097 241 3.881 241 98.577
BUR080098 242 4.006 242 101.752
BUR080099 243 4.131 243 104.927
BUR080100 244 4.256 244 108.102
BUR080101 245 4.381 245 111.277
BUR080102 246 4.506 246 114.452
BUR080103 247 4.631 247 117.627
BUR080104 325 1.513 0.075 0.184 325 38.430 1.905 4.674
BUR080105 326 1.638 326 41.605
BUR080106 327 1.763 327 44.780
BUR080107 328 1.888 328 47.955
BUR080108 329 2.013 329 51.130
BUR080109 330 2.138 330 54.305
BUR080110 331 2.268 331 57.607
BUR080111 332 2.393 0.065 0.182 332 60.782 1.651 3.048
BUR080112 333 2.518 333 63.957
BUR080113 334 2.643 334 67.132
BUR080114 335 2.768 335 70.307
BUR080115 336 2.893 336 73.482
BUR080116 337 3.018 337 76.657
BUR080117 338 3.143 338 79.832

21 www.fluorocarbonseals.com
 ANGLE CUT BACK-UP RING

Inch mm
FCS Size Internal Wall Size Internal Wall
Part NO Code Thickness Code Thickness
Diameter Thickness Diameter Thickness
(T) (T)
(ID) (W) (ID) (W)

BUR080118 339 3.273 339 83.134

BUR080119 340 3.398 340 86.309
BUR080120 341 3.523 341 89.484
BUR080121 342 3.648 342 92.659
BUR080122 343 3.773 343 95.834
BUR080123 344 3.898 0.065 0.182 344 99.009 1.651 4.623
BUR080124 345 4.028 345 102.311
BUR080125 346 4.1453 346 105.486
BUR080126 347 4.278 347 108.661
BUR080127 348 4.403 348 111.836
BUR080128 349 4.528 349 115.011
BUR080129 425 4.551 0.110 0.237 425 115.595 2.794 6.019
BUR080130 426 4.676 426 118.770
BUR080131 427 4.801 427 121.945
BUR080132 428 4.926 428 125.120
BUR080133 429 5.051 429 128.295
BUR080134 430 5.176 430 131.470
BUR080135 431 5.301 431 134.645
BUR080136 432 5.426 432 137.820
BUR080137 433 5.551 433 140.995
BUR080138 434 5.676 434 144.170
BUR080139 435 5.801 435 147.345
BUR080140 436 5.926 436 150.520
BUR080141 437 6.051 437 153.695
BUR080142 438 6.274 438 159.360
BUR080143 439 6.524 439 165.710
BUR080144 440 6.774 440 172.060
BUR080145 441 7.024 441 178.410
BUR080146 442 7.274 442 184.760
BUR080147 443 7.524 0.100 0.235 443 191.110 2.540 5.969
BUR080148 444 7.774 444 197.460
BUR080149 445 8.024 445 203.810
BUR080150 446 8.524 446 216.510
BUR080151 447 9.024 447 229.210
BUR080152 448 9.524 448 241.910
BUR080153 449 10.024 449 254.610
BUR080154 450 10.524 450 267.310
BUR080155 451 11.024 451 280.010
BUR080156 452 11.524 452 292.710
BUR080157 453 12.024 453 305.410
BUR080158 454 12.524 454 318.110
BUR080159 455 13.024 455 330.810
BUR080160 456 13.524 456 343.510
BUR080161 457 14.024 457 356.210
BUR080162 458 14.524 458 268.910
BUR080163 459 15.024 459 381.610
BUR080164 460 15.524 460 394.310

www.fluorocarbonseals.com 22
 ANGLE CUT BACK-UP RING

Inch mm
FCS Size Internal Thickness (T)
Wall Size Internal Thickness (T)
Wall
Part NO Code Diameter Thickness (W) Code Diameter Thickness (W)
(ID) MAX MIN MAX MIN (ID) MAX MIN MAX MIN
BUR060026 221 1.438 221 36.525
0.029 0.025 0.122 0.120 0.736 0.635 3.099 3.048
BUR060027 222 1.500 222 38.100
BUR060028 325 1.500 325 38.100
BUR060029 326 1.625 326 41.275
BUR060030 327 1.750 327 44.450
BUR060031 328 1.875 328 47.625
BUR060032 329 2.000 329 50.800
BUR060033 330 2.125 330 53.975
BUR060034 331 2.250 331 57.150
BUR060035 332 2.375 332 60.325
BUR060036 333 2.500 333 63.500
BUR060037 334 2.625 334 66.675
BUR060038 335 2.750 335 69.850
BUR060039 336 2.875 336 73.025
BUR060040 337 3.000 0.036 0.031 0.186 0.184 337 76.200 0.914 0.787 4.724 4.674
BUR060041 338 3.125 338 79.375
BUR060042 339 3.250 339 82.550
BUR060043 340 3.375 340 85.725
BUR060044 341 3.500 341 88.900
BUR060045 342 3.625 342 92.075
BUR060046 343 3.750 343 95.250
BUR060047 344 3.875 344 98.425
BUR060048 345 4.000 345 101.600
BUR060049 346 4.125 346 104.775
BUR060050 347 4.250 347 107.950
BUR060051 348 4.375 348 111.125
BUR060052 349 4.500 349 114.300
BUR060053 425 4.500 425 114.300
BUR060054 426 4.625 426 117.475
BUR060055 427 4.750 427 120.650
BUR060056 428 4.875 428 123.825
BUR060057 429 5.000 429 127.000
BUR060058 430 5.125 430 130.175
BUR060059 431 5.250 431 133.350
BUR060060 432 5.375 432 136.525
BUR060061 433 5.500 433 139.700
BUR060062 434 5.625 0.052 0.046 0.239 0.237 434 142.875 1.321 1.168 6.071 6.019
BUR060063 435 5.750 435 146.050
BUR060064 436 5.875 436 149.225
BUR060065 437 6.000 437 152.400
BUR060066 438 6.250 438 158.750
BUR060067 439 6.500 439 165.100
BUR060068 440 6.750 440 171.450
BUR060069 441 7.000 441 177.800
BUR060060 442 7.250 442 184.150
BUR060061 443 7.500 443 190.500

23 www.fluorocarbonseals.com
 SPIRAL BACK-UP RING

1 2

W ID

1.With two Backup Ring

2.With one Backup Ring

NOTE:
v NON STANDARD DIMENSIONS ARE AVAILABLE ON REQUEST.

Inch mm
FCS Size Internal Thickness (T)
Wall Size Internal Thickness (T)
Wall
Part NO Code Diameter Thickness (W) Code Diameter Thickness (W)
(ID) MAX MIN MAX MIN (ID) MAX MIN MAX MIN
BUR060001 006 0.125 006 3.175
BUR060002 007 0.156 007 3.962
BUR060003 008 0.188 008 4.775
BUR060004 009 0.219 0.029 0.025 0.056 0.054 009 5.563 0.736 0.635 1.422 1.372
BUR060005 010 0.250 010 6.350
BUR060006 011 0.312 011 7.925
BUR060007 012 0.375 012 9.525
BUR060008 110 0.375 110 9.525
BUR060009 111 0.438 111 11.125
BUR060010 112 0.500 112 12.700
BUR060011 113 0.562 0.029 0.025 0.089 0.087 113 14.275 0.736 0.635 2.261 2.209
BUR060012 114 0.625 114 15.875
BUR060013 115 0.688 115 17.475
BUR060014 116 0.750 116 19.050
BUR060015 210 0.750 210 19.050
BUR060016 211 0.812 211 20.625
BUR060017 212 0.875 212 22.225
BUR060018 213 0.938 213 23.825
BUR060019 214 1.000 214 25.400
BUR060020 215 1.062 0.029 0.025 0.122 0.120 215 26.975 0.736 0.635 3.098 3.048
BUR060021 216 1.125 216 28.575
BUR060022 217 1.188 217 30.175
BUR060023 218 1.250 218 31.750
BUR060024 219 1.312 219 33.325
BUR060025 220 1.375 220 34.925

www.fluorocarbonseals.com 24
 SPIRAL BACK-UP RING

Inch mm
FCS Size Internal Thickness (T)
Wall Size Internal Thickness (T)
Wall
Part NO Code Diameter Thickness (W) Code Diameter Thickness (W)
(ID) MAX MIN MAX MIN (ID) MAX MIN MAX MIN
BUR060062 444 7.750 444 196.850
BUR060063 445 8.000 445 203.200
BUR060064 446 8.500 446 215.900
BUR060065 447 9.000 447 228.600
BUR060066 448 9.500 448 241.300
BUR060067 449 10.000 449 254.000
BUR060068 450 10.500 450 266.700
BUR060069 451 11.000 451 279.400
BUR060070 452 11.500 0.052 0.046 0.239 0.237 452 292.100 1.321 1.168 6.071 6.019
BUR060071 453 12.000 453 304.800
BUR060072 454 12.500 454 317.500
BUR060073 455 13.000 455 330.200
BUR060074 456 13.500 456 342.900
BUR060075 457 14.000 457 355.600
BUR060076 458 14.500 458 368.300
BUR060077 459 15.000 459 381.000
BUR060078 460 15.500 460 393.700

25 www.fluorocarbonseals.com
 CONCAVE BACK-UP RING

1 2

W ID

1.With two Backup Ring

2.With one Backup Ring

A T

NOTE: W T A
v NON STANDARD DIMENSIONS ARE
mm 1.346 (± 0.076) 1.245 1.143 (± 0.076)
AVAILABLE ON REQUEST. Inch 0.053 (± 0.003) 0.049 0.045 (± 0.003)

Inch mm Inch mm
FCS Size Internal Internal FCS Size Internal Internal
Part NO Code Diameter Tolerance Diameter Tolerance Part NO Code Diameter Tolerance Diameter Tolerance
(ID) (ID) (ID) (ID)

BUR090001 004 0.096 2.438 BUR090026 029 1.518 38.557

± 0.013 ± 0.330
BUR090002 005 0.127 3.226 BUR090027 030 1.643 41.732
BUR090003 006 0.140 3.556 BUR090028 031 1.768 445.907
± 0.015 ± 0.381
BUR090004 007 0.171 4.343 BUR090029 032 1.893 48.082
BUR090005 008 0.202 5.131 BUR090030 033 2.018 51.257
BUR090006 009 0.234 5.944 BUR090031 034 2.143 54.432
± 0.005 ± 0.127
BUR090007 010 0.265 6.731 BUR090032 035 2.268 57.607
± 0.457
BUR090008 011 0.327 8.306 BUR090033 036 2.393 ± 0.018 60.782
BUR090009 012 0.390 9.906 BUR090034 037 2.519 63.983
BUR090010 013 0.455 11.557 BUR090035 038 2.643 67.132
BUR090011 014 0.518 13.157 BUR090036 039 2.768 70.307
± 0.020 ± 0.508
BUR090012 015 0.580 14.732 BUR090037 040 2.893 73.482
BUR090013 016 0.643 16.332 BUR090038 041 3.018 76.657
BUR090014 017 0.705 17.907 BUR090039 042 3.268 ± 0.024 83.007 ± 0.610
BUR090015 018 0.768 19.507 BUR090040 043 3.518 89.357
± 0.009 ± 0.229
BUR090016 019 0.830 21.082 BUR090041 044 3.768 95.707
± 0.027 ± 0.686
BUR090017 020 0.893 22.682 BUR090042 045 4.018 102.057
BUR090018 021 0.955 24.257 BUR090043 046 4.268 108.407
BUR090019 022 1.018 25.857 BUR090044 047 4.518 ± 0.030 114.757 ± 0.762
BUR090020 023 1.080 ± 0.010 27.432 ± 0.254 BUR090045 048 4.768 121.107
BUR090021 024 1.143 29.032 BUR090046 049 5.018 127.457
± 0.037 ± 0.940
BUR090022 025 1.205 30.607 BUR090047 050 5.268 133.807
BUR090023 026 1.268 ± 0.011 32.207 ± 0.0.279
BUR090024 027 1.330 33.782
BUR090025 028 1.393 ± 0.013 35.382 ± 0.330

www.fluorocarbonseals.com 26
 CONCAVE BACK-UP RING

NOTE: W T A
v NON STANDARD DIMENSIONS ARE mm 2.184 (± 0.076) 1.346 1.143 (± 0.076)
AVAILABLE ON REQUEST. Inch 0.086 (± 0.003) 0.053 0.045 (± 0.003)

Inch mm Inch mm
FCS Size Internal Internal FCS Size Internal Internal
Part NO Code Diameter Tolerance Diameter Tolerance Part NO Code Diameter Tolerance Diameter Tolerance
(ID) (ID) (ID) (ID)

BUR090048 102 0.077 1.956 BUR090088 142 2.393 60.782

BUR090049 103 0.109 2.769 BUR090089 143 2.456 62.382
BUR090050 104 0.140 3.556 BUR090090 144 2.518 ± 0.020 63.957 ± 0.508
BUR090051 105 0.171 4.343 BUR090091 145 2.581 65.557
BUR090052 106 0.202 5.131 BUR090092 146 2.643 67.132
± 0.005 ± 0.127
BUR090053 107 0.234 5.944 BUR090093 147 2.706 68.732
BUR090054 108 0.265 6.731 BUR090094 148 2.768 70.307
± 0.022 ± 0.559
BUR090055 109 0.327 8.306 BUR090095 149 2.831 71.907
BUR090056 110 0.390 9.906 BUR090096 150 2.893 73.482
BUR090057 111 0.452 11.481 BUR090097 151 3.018 76.657
BUR090058 112 0.515 13.081 BUR090098 152 3.268 ± 0.024 83.007 ± 0.610
± 0.007 ± 0.178
BUR090059 113 0.577 14.656 BUR090099 153 3.518 89.357
BUR090060 114 0.640 16.256 BUR090100 154 3.768 95.707
± 0.028 ± 0.711
BUR090061 115 0.702 ± 0.009 17.831 ± 0.229 BUR090101 155 4.018 102.057
BUR090062 116 0.765 19.431 BUR090102 156 4.268 108.407
BUR090063 117 0.831 21.107 BUR090103 157 4.518 ± 0.030 114.757 ± 0.762
BUR090064 118 0.893 22.682 BUR090104 158 4.768 121.107
BUR090065 119 0.956 24.282 BUR090105 159 5.018 127.457
± 0.010 ± 0.254
BUR090066 120 1.018 25.857 BUR090106 160 5.268 133.807
BUR090067 121 1.081 27.457 BUR090107 161 5.518 ± 0.035 140.157 ± 0.889
BUR090068 122 1.143 29.032 BUR090108 162 5.768 146.507
BUR090069 123 1.206 30.632 BUR090109 163 6.018 152.857
BUR090070 124 1.268 32.207 BUR090110 164 6.268 159.207
BUR090071 125 1.331 33.807 BUR090111 165 6.518 165.557
± 0.012 ± 0.305 ± 0.040 ± 1.016
BUR090072 126 1.393 35.382 BUR090112 166 6.768 171.907
BUR090073 127 1.456 36.982 BUR090113 167 7.018 178.257
BUR090074 128 1.518 38.557 BUR090114 168 7.268 184.607
BUR090075 129 1.581 40.157 BUR090115 169 7.518 190.957
± 0.045 ± 1.143
BUR090076 130 1.643 41.732 BUR090116 170 7.768 197.307
BUR090077 131 1.706 43.332 BUR090117 171 8.018 203.657
± 0.015 ± 0.381
BUR090078 132 1.768 44.907 BUR090118 172 8.268 210.007
BUR090079 133 1.831 46.507 BUR090119 173 8.518 216.357
BUR090080 134 1.893 48.082 BUR090120 174 8.768 ± 0.050 222.707 ± 1.270
BUR090081 135 1.956 49.682 BUR090121 175 9.018 229.057
BUR090082 136 2.018 51.257 BUR090122 176 9.268 235.407
BUR090083 137 2.081 52.857 BUR090123 177 9.518 241.757
± 0.017 ± 0.432 ± 0.055 ± 1.397
BUR090084 138 2.143 54.432 BUR090124 178 9.768 248.107
BUR090085 139 2.206 56.032
BUR090086 140 2.268 57.607
BUR090087 141 2.331 ± 0.020 59.207 ± 0.508

27 www.fluorocarbonseals.com
 CONCAVE BACK-UP RING

NOTE: W T A
v NON STANDARD DIMENSIONS ARE mm 2.997 (± 0.102) 1.27 1.016 (± 0.076)
AVAILABLE ON REQUEST. Inch 0.118 (± 0.004) 0.050 0.040 (± 0.003)

Inch mm Inch mm
FCS Size Internal Internal FCS Size Internal Internal
Part NO Code Diameter Tolerance Diameter Tolerance Part NO Code Diameter Tolerance Diameter Tolerance
(ID) (ID) (ID) (ID)
BUR090125 201 0.202 5.131 BUR090167 243 4.131 ± 0.028 104.927 ± 0.771
BUR090126 202 0.265 6.731 BUR090168 244 4.256 108.102
BUR090127 203 0.327 ± 0.005 8.306 ± 0.127 BUR090169 245 4381 111.277
BUR090128 204 0.390 9.906 BUR090170 246 4.506 ± 0.030 114.452 ± 0.762
BUR090129 205 0.455 11.557 BUR090171 247 4.631 117.627
BUR090130 206 0.518 13.157 BUR090172 248 4.768 121.107
± 0.007 ± 0.178
BUR090131 207 0.580 14.732 BUR090173 249 4.893 124.282
BUR090132 208 0.643 16.332 BUR090174 250 5.018 127.457
± 0.009 ± 0.229
BUR090133 209 0.705 17.907 BUR090175 251 5.143 130.632
BUR090134 210 0.765 19.431 BUR090176 252 5.268 133.807
BUR090135 211 0.828 21.031 BUR090177 253 5.393 136.982
± 0.035 ± 0.889
BUR090136 212 0.891 22.631 BUR090178 254 5.518 140.157
± 0.010 ± 0.254
BUR090137 213 0.953 24.206 BUR090179 255 5.643 143.332
BUR090138 214 1.016 25.806 BUR090180 256 5.768 146.507
BUR090139 215 1.078 27.381 BUR090181 257 5.898 149.682
BUR090140 216 1.141 28.981 BUR090182 258 6.018 152.857
BUR090141 217 1.203 30.556 BUR090183 259 6.268 159.207
BUR090142 218 1.266 32.156 BUR090184 260 6.518 165.557
± 0.012 ± 0.305 ± 0.040 ± 1.016
BUR090143 219 1.334 33.884 BUR090185 261 6.768 171.907
BUR090144 220 1.397 35.484 BUR090186 262 7.018 178.257
BUR090145 221 1.459 37.059 BUR090187 263 7.268 184.607
BUR090146 222 1.522 38.659 BUR090188 264 7.518 190.957
± 0.045 ± 1.143
BUR090147 223 1.647 ± 0.015 41.834 ± 0.381 BUR090189 265 7.768 197.307
BUR090148 224 1.772 45.009 BUR090190 266 8.018 203.657
BUR090149 225 1.897 48.184 BUR090191 267 8.268 210.007
BUR090150 226 2.022 ± 0.018 51.359 ± 0.457 BUR090192 268 8.518 216.357
± 0.050 ± 1.270
BUR090151 227 2.147 54.534 BUR090193 269 8.768 222.707
BUR090152 228 2.272 57.709 BUR090194 270 9.018 229.057
BUR090153 229 2.397 60.884 BUR090195 271 9.268 235.407
± 0.020 ± 0.508
BUR090154 230 2.522 64.059 BUR090196 272 9.518 241.757
BUR090155 231 2.631 66.827 BUR090197 273 9.768 ± 0.055 248.107 ± 1.397
BUR090156 232 2.756 70.002 BUR090198 274 10.018 254.457
BUR090157 233 2.881 73.177 BUR090199 275 10.518 267.157
BUR090158 234 3.006 76.352 BUR090200 276 11.018 279.857
BUR090159 235 3.131 ± 0.024 79.527 ± 0.610 BUR090201 277 11.518 292.557
BUR090160 236 3.256 82.702 BUR090202 278 12.018 305.257
± 0.065 ± 1.651
BUR090161 237 3.381 85.877 BUR090203 279 13.018 330.657
BUR090162 238 3.506 89.052 BUR090204 280 14.018 356.057
BUR090163 239 3.631 92.227 BUR090205 281 15.018 381.457
BUR090164 240 3.756 95.402 BUR090206 282 15.989 ± 0.075 406.121 ± 1.905
± 0.028 ± 0.711
BUR090165 241 3.881 98.577 BUR090207 283 16.989 ± 0.080 431.521 ± 2.032
BUR090166 242 4.006 101.752 BUR090208 284 17.989 ± 0.085 456.921 ± 2.159

www.fluorocarbonseals.com 28
 CONCAVE BACK-UP RING

NOTE: W T A
v NON STANDARD DIMENSIONS ARE mm 4.6482 (± 0.127) 1.930 1.524 (± 0.102)
AVAILABLE ON REQUEST. Inch 0.183 (± 0.005) 0.076 0.060 (± 0.004)

Inch mm Inch mm
FCS Size Internal Internal FCS Size Internal Internal
Part NO Code Diameter Tolerance Diameter Tolerance Part NO Code Diameter Tolerance Diameter Tolerance
(ID) (ID) (ID) (ID)

BUR090209 309 0.450 ± 0.005 11.430 ± 0.127 BUR090253 353 5.028 127.711
BUR090210 310 0.513 13.030 BUR090254 354 5.153 130.886
± 0.007 ± 0.178
BUR090211 311 0.575 14.605 BUR090255 355 5.278 134.061
BUR090212 312 0.638 16.205 BUR090256 356 5.403 137.236
± 0.009 ± 0.229
BUR090213 313 0.700 17.780 BUR090257 357 5.528 ± 0.037 140.411 ± 0.940
BUR090214 314 0.763 19.380 BUR090258 358 5.653 143.586
BUR090215 315 0.825 20.955 BUR090259 359 5.778 146.761
BUR090216 316 0.888 22.555 BUR090260 360 5.903 149.936
± 0.010 ± 0.254
BUR090217 317 0.950 24.130 BUR090261 361 6.028 153.111
BUR090218 318 1.013 25.730 BUR090262 362 6.278 159.461
BUR090219 319 1.075 27.305 BUR090263 363 6.528 165.811
± 0.040 ± 1.016
BUR090220 320 1.138 28.905 BUR090264 364 6.778 172.161
BUR090221 321 1.200 30.480 BUR090265 365 7.028 178.511
BUR090222 322 1.263 ± 0.012 32.080 ± 0.305 BUR090266 366 7.278 184.861
BUR090223 323 1.316 33.426 BUR090267 367 7.528 191.211
± 0.045 ± 1.143
BUR090224 324 1.388 35.255 BUR090268 368 7.778 197.561
BUR090225 325 1.513 38.430 BUR090269 369 8.028 203.911
BUR090226 326 1.638 41.605 BUR090270 370 8.278 210.261
± 0.015 ± 0.015
BUR090227 327 1.763 44.780 BUR090271 371 8.528 216.611
± 0.050 ± 1.270
BUR090228 328 1.888 47.955 BUR090272 372 8.778 222.961
BUR090229 329 2.013 51.130 BUR090273 373 9.028 229.311
BUR090230 330 2.138 54.304 BUR090274 374 9.278 235.661
± 0.018 ± 0.457
BUR090231 331 2.268 57.607 BUR090275 375 9.528 242.011
± 0.055 ± 1.397
BUR090232 332 2.393 60.782 BUR090276 376 9.778 248.361
BUR090233 333 2.518 63.957 BUR090277 377 10.028 254.711
BUR090234 334 2.643 67.132 BUR090278 378 10.528 267.411
± 0.020 ± 0.508 ± 0.060 ± 1.524
BUR090235 335 2.768 70.307 BUR090279 379 11.028 280.111
BUR090236 336 2.893 73.482 BUR090280 380 11.528 292.811
BUR090237 337 3.018 76.657 BUR090281 381 12.028 ± 0.065 305.511 ± 1.651
BUR090238 338 3.143 79.832 BUR090282 382 13.028 330.911
BUR090239 339 3.273 ± 0.024 83.134 ± 0.610 BUR090283 383 14.028 356.311
± 0.070 ± 1.778
BUR090240 340 3.398 86.309 BUR090284 384 15.028 381.711
BUR090241 341 3.523 89.484 BUR090285 385 16.008 ± 0.075 406.603 ± 1.905
BUR090242 342 3.648 92.659 BUR090286 386 17.008 ± 0.080 432.003 ± 2.032
BUR090243 343 3.773 95.834 BUR090287 397 18.008 ± 0.085 457.403 ± 2.159
BUR090244 344 3.898 ± 0.028 99.009 ± 0.711 BUR090288 388 19.006 ± 0.090 482.752 ± 2.286
BUR090245 345 4.028 102.311 BUR090289 389 20.006 508.152
± 0.095 ± 2.413
BUR090246 346 4.153 105.486 BUR090290 390 21.006 533.552
BUR090247 347 4.278 108.661 BUR090291 391 22.006 ± 0.100 558.952 ± 2.540
BUR090248 348 4.403 111.836 BUR090292 392 22.993 ± 0.105 584.022 ± 2.667
BUR090249 349 4.528 115.011 BUR090293 393 23.993 ± 0.110 609.422 ± 2.794
± 0.030 ± 0.762
BUR090250 350 4.653 118.186 BUR090294 394 24.993 ± 0.115 634.822 ± 2.921
BUR090251 351 4.778 121.361 BUR090295 395 25.993 ± 0.120 660.222 ± 3.048
BUR090252 252 4.903 124.536

29 www.fluorocarbonseals.com
 CONCAVE BACK-UP RING

NOTE: W T A
v NON STANDARD DIMENSIONS ARE mm 5.994 (±0.152) 2.972 2.438 (± 0.127)
AVAILABLE ON REQUEST. Inch 0.236 (± 0.006) 0.117 0.096 (± 0.005)

Inch mm Inch mm
FCS Size Internal Internal FCS Size Internal Internal
Part NO Code Diameter Tolerance Diameter Tolerance Part NO Code Diameter Tolerance Diameter Tolerance
(ID) (ID) (ID) (ID)

BUR090296 425 4.551 115.595 BUR090322 451 11.024 280.010

BUR090297 426 4.676 118.770 BUR090323 452 11.524 292.710
± 0.033
0.005 ± 0.838
BUR090298 427 4.801 121.945 BUR090324 453 12.024 ± 0.060 305.410 ± 1.524
BUR090299 428 4.926 125.120 BUR090325 454 12.524 318.110
BUR090300 429 5.051 128.295 BUR090326 455 13.024 330.810
BUR090301 430 5.176 131.470 BUR090327 456 13.524 343.510
BUR090302 431 5.301 134.645 BUR090328 457 14.024 356.210
BUR090303 432 5.426 137.820 BUR090329 458 14.524 ± 0.070 368.910 ± 1.778
BUR090304 433 5.551 ± 0.037 140.995 ± 0.940 BUR090330 459 15.024 381.610
BUR090305 434 5.676 144.170 BUR090331 460 15.524 394.310
BUR090306 435 5.801 147.345 BUR090332 461 16.004 406.502
± 0.075 ± 1.905
BUR090307 436 5.926 150.520 BUR090333 462 16.504 419.202
BUR090308 437 6.051 153.695 BUR090334 463 17.004 ± 0.080 431.902 ± 2.032
BUR090309 438 6.274 159.360 BUR090335 464 17.504 444.602
BUR090310 439 6.525 165.735 BUR090336 465 18.004 ± 0.085 457.302 ± 2.159
± 0.040 ± 1.016
BUR090311 440 6.774 172.060 BUR090337 466 18.504 470.002
BUR090312 441 7.024 178.410 BUR090338 467 19.004 482.702
± 0.090 ± 2.286
BUR090313 442 7.274 184.760 BUR090339 468 19.504 495.402
BUR090314 443 7.524 191.110 BUR090340 469 20.004 508.102
± 0.045 ± 1.143 ± 0.095 ± 2.413
BUR090315 444 7.774 197.460 BUR090341 470 21.004 533.502
BUR090316 445 8.024 203.810 BUR090342 471 22.004 ± 0.100 558.902 ± 2.540
BUR090317 446 8.524 216.510 BUR090343 472 23.004 ± 0.105 584.302 ± 2.667
BUR090318 447 9.024 229.210 BUR090344 473 24.004 ± 0.110 609.702 ± 2.794
± 0.055 ± 1.397
BUR090319 448 9.524 241.910 BUR090345 474 25.004 ± 0.115 635.102 ± 2.921
BUR090320 449 10.024 254.610 BUR090346 475 26.004 ± 0.120 660.502 ± 3.048
BUR090321 450 10.524 ± 0.060 267.310 ± 1.524

www.fluorocarbonseals.com 30
 CERTIFICATES

31 www.fluorocarbonseals.com
 (an ISO 9001:2015 Certified company)
3/178, Old Mahabalipuram Road,
Thuraipakkam, Chennai - 600 097. India
Tel: 91-044-2458 0666, 2458 0888 Telefax: 91-044-2458 0707.
e-Mail: [email protected], [email protected]
Web: www.fluorocarbonseals.com

Manufacturers of
PTFE, Victrex ® PEEK, PCTFE(Kel-F), PFA, PVDF, VESPEL, NYLON, ACETAL, UHMWPE,
TPU, FFKM, FKM, HNBR, EPDM and other Engineering Polymer Components.
FCS - 2018